summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-01Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linuxDave Airlie
Alex writes: "A few more radeon fixes for 3.8. Mostly small stuff. The big change is disabling the use of the DMA ring for VM PT updates. This reverts back to the 3.7 behavior. Problem is we can get huge PT updates in certain cases that are too big for the DMA ring. I've got patches to use an IB for this so I can re-enable the use of the DMA ring for VM PT updates in 3.9. This request also includes the patches from the last pull request I sent on Monday in case you haven't pulled them yet." * 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: switch back to the CP ring for VM PT updates drm/radeon: prevent crash in the ring space allocation drm/radeon: Calling object_unrefer() when creating fb failure drm/radeon/r5xx-r7xx: wait for the MC to settle after MC blackout drm/radeon/evergreen+: wait for the MC to settle after MC blackout drm/radeon: protect against div by 0 in backend setup drm/radeon: fix backend map setup on 1 RB sumo boards drm/radeon: add quirk for RV100 board drm/radeon: add WAIT_UNTIL to the non-VM safe regs list for cayman/TN drm/radeon: fix MC blackout on evergreen+
2013-01-31target: Fix divide by zero bug in fabric_max_sectors for unconfigured devicesNicholas Bellinger
This patch fixes a possible divide by zero bug when the fabric_max_sectors device attribute is written and backend se_device failed to be successfully configured -> enabled. Go ahead and use block_size=512 within se_dev_set_fabric_max_sectors() in the event of a target_configure_device() failure case, as no valid dev->dev_attrib.block_size value will have been setup yet. Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-31target: Fix regression allowing unconfigured devices to fabric port linkNicholas Bellinger
This patch fixes a v3.8-rc1 regression bug where an unconfigured se_device was incorrectly allowed to perform a fabric port-link. This bug was introduced in commit: commit 0fd97ccf45be26fb01b3a412f1f6c6b5044b2f16 Author: Christoph Hellwig <hch@infradead.org> Date: Mon Oct 8 00:03:19 2012 -0400 target: kill struct se_subsystem_dev which ended up dropping the original se_subsystem_dev->se_dev_ptr check preventing this from happening with pre commit 0fd97ccf code. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-01Merge branch 'for-3.8/upstream-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid PullHID fixes from Jiri Kosina: - fix i2c-hid and hidraw interaction, by Benjamin Tissoires - a quirk to make a particular device (Formosa IR receiver) work properly, by Nicholas Santos * 'for-3.8/upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: fix i2c_hid_output_raw_report HID: usbhid: quirk for Formosa IR receiver HID: remove x bit from sensor doc
2013-02-01Merge tag 'nfs-for-3.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - Error reporting in nfs_xdev_mount incorrectly maps all errors to ENOMEM - Fix an NFSv4 refcounting issue - Fix a mount failure when the server reboots during NFSv4 trunking discovery - NFSv4.1 mounts may need to run the lease recovery thread. - Don't silently fail setattr() requests on mountpoints - Fix a SUNRPC socket/transport livelock and priority queue issue - We must handle NFS4ERR_DELAY when resetting the NFSv4.1 session. * tag 'nfs-for-3.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.1: Handle NFS4ERR_DELAY when resetting the NFSv4.1 session SUNRPC: When changing the queue priority, ensure that we change the owner NFS: Don't silently fail setattr() requests on mountpoints NFSv4.1: Ensure that nfs41_walk_client_list() does start lease recovery NFSv4: Fix NFSv4 trunking discovery NFSv4: Fix NFSv4 reference counting for trunked sessions NFS: Fix error reporting in nfs_xdev_mount
2013-02-01Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "A number of fixes all across the MIPS tree. No area is particularly standing out and things have cooled down quite nicely for a release." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Function tracer: Fix broken function tracing mips: Move __virt_addr_valid() to a place for MIPS 64 MIPS: Netlogic: Fix UP compilation on XLR MIPS: AR71xx: Fix AR71XX_PCI_MEM_SIZE MIPS: AR724x: Fix AR724X_PCI_MEM_SIZE MIPS: Lantiq: Fix cp0_perfcount_irq mapping MIPS: DSP: Fix DSP mask for registers. MIPS: Fix build failure by adding definition of pfn_pmd(). MIPS: Octeon: Fix warning. MIPS: delay.c: Check BITS_PER_LONG instead of __SIZEOF_LONG__ MIPS: PNX833x: Fix comment. MIPS: Add struct p_format to union mips_instruction. MIPS: Export <asm/break.h>. MIPS: BCM47xx: Enable SSB prerequisite SSB_DRIVER_PCICORE. MIPS: BCM47xx: Select GPIOLIB for BCMA on bcm47xx platform MIPS: vpe.c: Fix null pointer dereference in print arguments.
2013-01-31drm/radeon: switch back to the CP ring for VM PT updatesAlex Deucher
For large VM page table updates, we can sometimes generate more packets than there is space on the ring. This happens more readily with the DMA ring since it is 64K (vs 1M for the CP). For now, switch back to the CP. For the next kernel, I have a patch to utilize IBs for VM PT updates which alleviates this problem. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58354 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31Merge branch 'timers/for-arm' into timers/coreThomas Gleixner
2013-01-31clockevents: Add generic timer broadcast functionMark Rutland
Currently, the timer broadcast mechanism is defined by a function pointer on struct clock_event_device. As the fundamental mechanism for broadcast is architecture-specific, this means that clock_event_device drivers cannot be shared across multiple architectures. This patch adds an (optional) architecture-specific function for timer tick broadcast, allowing drivers which may require broadcast functionality to be shared across multiple architectures. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: nico@linaro.org Cc: Will.Deacon@arm.com Cc: Marc.Zyngier@arm.com Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/1358183124-28461-3-git-send-email-mark.rutland@arm.com Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-01-31clockevents: Add generic timer broadcast receiverMark Rutland
Currently the broadcast mechanism used for timers is abstracted by a function pointer on struct clock_event_device. As the fundamental mechanism for broadcast is architecture-specific, this ties each clock_event_device driver to a single architecture, even where the driver is otherwise generic. This patch adds a standard path for the receipt of timer broadcasts, so drivers and/or architecture backends need not manage redundant lists of timers for the purpose of routing broadcast timer ticks. [tglx: Made the implementation depend on the config switch as well ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: nico@linaro.org Cc: Will.Deacon@arm.com Cc: Marc.Zyngier@arm.com Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/1358183124-28461-2-git-send-email-mark.rutland@arm.com Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-01-31drm/radeon: prevent crash in the ring space allocationAlex Deucher
If the requested number of DWs on the ring is larger than the size of the ring itself, return an error. In testing with large VM updates, we've seen crashes when we try and allocate more space on the ring than the total size of the ring without checking. This prevents the crash but for large VM updates or bo moves of very large buffers, we will need to break the transaction down into multiple batches. I have patches to use IBs for the next kernel. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-01-31drm/radeon: Calling object_unrefer() when creating fb failureliu chuansheng
When kzalloc() failed in radeon_user_framebuffer_create(), need to call object_unreference() to match the object_reference(). Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Signed-off-by: xueminsu <xuemin.su@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-01-31drm/radeon/r5xx-r7xx: wait for the MC to settle after MC blackoutAlex Deucher
Some chips seem to need a little delay after blacking out the MC before the requests actually stop. Stop DMAR errors reported by Shuah Khan. Reported-by: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31tcm_vhost: fix pr_err on early kickMichael S. Tsirkin
It's OK to get kick before backend is set or after it is cleared, we can just ignore it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-31PNPACPI: Fix acpi_bus_get_device() check in drivers/pnp/pnpacpi/core.cYasuaki Ishimatsu
acpi_bus_get_device() returns int not acpi_status. The patch change not to apply ACPI_FAILURE() to the return value of acpi_bus_get_device(). Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-31ACPI / PM: Fix acpi_bus_get_device() check in drivers/acpi/device_pm.cYasuaki Ishimatsu
acpi_bus_get_device() returns int not acpi_status. The patch change not to apply ACPI_FAILURE() to the return value of acpi_bus_get_device(). Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-31ACPI / scan: Clean up acpi_bus_get_parent()Rafael J. Wysocki
Make acpi_bus_get_parent() more straightforward and remove an unnecessary local variable ret from it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-01-31ARM: highbank: mask cluster id from cpu_logical_mapRob Herring
With commit a0ae0240 (ARM: kernel: add device tree init map function), the cpu id value may include the cluster id and is no longer 0-3, so we need to mask it now to get the right hard cpu index. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-01-31ARM: scu: mask cluster id from cpu_logical_mapRob Herring
With commit a0ae0240 (ARM: kernel: add device tree init map function), the cpu id value may include the cluster id and is no longer 0-3, so we need to mask it in scu_power_mode to get the local cpu number. Since we are only dealing with the cpu we are running on, the cluster id should not ever be needed. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-01-31ACPI / scan: Fix acpi_bus_get_device() check in acpi_match_device()Rafael J. Wysocki
Since acpi_bus_get_device() returns int and not acpi_status, change acpi_match_device() so that it doesn't apply ACPI_FAILURE() to the return value of acpi_bus_get_device(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-01-31tcp: detect SYN/data drop when F-RTO is disabledYuchung Cheng
On receiving the SYN-ACK, Fast Open checks icsk_retransmit for SYN retransmission to detect SYN/data drops. But if F-RTO is disabled, icsk_retransmit is reset at step D of tcp_fastretrans_alert() ( under tcp_ack()) before tcp_rcv_fastopen_synack(). The fix is to use total_retrans instead which accounts for SYN retransmission regardless the use of F-RTO. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31ARM: scu: add empty scu_enable for !CONFIG_SMPRob Herring
Add an empty version of scu_enable for !SMP builds. This fixes compile error for highbank suspend code on !SMP builds. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-01-31l2tp: correctly handle ancillary data in the ip6 recv pathTom Parkin
l2tp_ip6 is incorrectly using the IPv4-specific ip_cmsg_recv to handle ancillary data. This means that socket options such as IPV6_RECVPKTINFO are not honoured in userspace. Convert l2tp_ip6 to use the IPv6-specific handler. Ref: net/ipv6/udp.c Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Chris Elston <celston@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31ipv6: export ip6_datagram_recv_ctlTom Parkin
ip6_datagram_recv_ctl and ip6_datagram_send_ctl are used for handling IPv6 ancillary data. Since ip6_datagram_send_ctl is already publicly exported for use in modules, ip6_datagram_recv_ctl should also be available to support ancillary data in the receive path. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31ipv6: rename datagram_send_ctl and datagram_recv_ctlTom Parkin
The datagram_*_ctl functions in net/ipv6/datagram.c are IPv6-specific. Since datagram_send_ctl is publicly exported it should be appropriately named to reflect the fact that it's for IPv6 only. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31Merge branch 'mlx4'David S. Miller
Merge mlx4 bug fixes from Amir Vadai. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_en: Fix transmit timeout when driver restarts portAmir Vadai
Under heavy CPU load, changing, ring size/mtu/etc. could result in transmit timeout, since stop-start port might take more than 10 seconds. Calling netif_detach_device to prevent tx queue transmit timeout. netif_detach_device() is not called under ndo_stop, because netif_carrier_off will prevent the timeout, and device should not be marked as not present, or else user won't be able to start it later on. CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_en: Don't reassign port mac address on firmware that supports itMatan Barak
Mac reassignments should only be done when not supported by the firmware. To accomplish that, checking firmware capability bit to know whether we should reassign macs in the driver. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_core: Use firmware driven flow steering hash modeHadar Hen Zion
The Firmware dynamically changes flow steering hash configuration from covering L2 only to "full" L2/L3/L4 mode needed. The dynamic change allows the driver to set hard coded hash configuration which is changed by the firmware from L2 to L2/L3/L4 when attaching the first L3/L4 flow steering rule and back to L2 when there are no more such rules. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_en: Fix ethtool rules leftovers after module unloadedHadar Hen Zion
As part of the driver unload flow, all steering rules must be deleted, make sure to remove the rules that were set through ethtool. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_en: Block insertion of ethtool steering rules while the interface ↵Hadar Hen Zion
is down Attaching steering rules while the interface is down is an invalid operation, block it. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_en: Fix vlan mask for ethtool steering rulesHadar Hen Zion
The vlan mask field should be validated and assigned according to the field size which is 12 bits. Also replace the numeric 0xfff mask with existing kernel macro. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_en: Validate VLAN IDs provided in ethtool flow steering rulesHadar Hen Zion
When attaching flow steering rules via Ethtool accept only valid vlans IDs e.g in the range: [0,4095]. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_en: Fix ip/udp steering rules multicast mac when attached via ethtoolHadar Hen Zion
Destination mac is a mandatory specification for ip/udp steering rules. When attaching multicast steering rules via ethtool the unicast mac of the interface was added to the rule specification instead of the multicast mac. The following commit sets the corresponding multicast mac for the rule multicast ip. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_core: Set correctly allow_loopback flagHadar Hen Zion
The allow_loopback flag was wrongly set using arithmetic bit operation, change the code to use logical bit operation. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31net/mlx4_core: Directly expose fields of HW flow steering rule control segmentHadar Hen Zion
Some of the fields for struct mlx4_net_trans_rule_hw_ctrl were packed into u32 and accessed through bit field operations. Expose and access them directly as u8. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-31Bluetooth: Fix hci_conn timeout routineAndre Guedes
If occurs a LE or SCO hci_conn timeout and the connection is already established (BT_CONNECTED state), the connection is not terminated as expected. This bug can be reproduced using l2test or scotest tool. Once the connection is established, kill l2test/scotest and the connection won't be terminated. This patch fixes hci_conn_disconnect helper so it is able to terminate LE and SCO connections, as well as ACL. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-31Bluetooth: Fix handling of unexpected SMP PDUsJohan Hedberg
The conn->smp_chan pointer can be NULL if SMP PDUs arrive at unexpected moments. To avoid NULL pointer dereferences the code should be checking for this and disconnect if an unexpected SMP PDU arrives. This patch fixes the issue by adding a check for conn->smp_chan for all other PDUs except pairing request and security request (which are are the first PDUs to come to initialize the SMP context). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> CC: stable@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-31HID: i2c-hid: fix i2c_hid_output_raw_reportBenjamin Tissoires
i2c_hid_output_raw_report is used by hidraw to forward set_report requests. The current implementation of i2c_hid_set_report needs to take the report_id as an argument. The report_id is stored in the first byte of the buffer in argument of i2c_hid_output_raw_report. Not removing the report_id from the given buffer adds this byte 2 times in the command, leading to a non working command. Reported-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-31fuse: bump version for READDIRPLUSMiklos Szeredi
Yeah, we have a capability flag for this as well, so this is not strictly necessary, but it doesn't hurt either. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-31FUSE: Adapt readdirplus to application usage patternsFeng Shuo
Use the same adaptive readdirplus mechanism as NFS: http://permalink.gmane.org/gmane.linux.nfs/49299 If the user space implementation wants to disable readdirplus temporarily, it could just return ENOTSUPP. Then kernel will recall it with readdir. Signed-off-by: Feng Shuo <steve.shuo.feng@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-31Do not use RCU for current process credentialsAnatol Pomozov
Commit c69e8d9c0 added rcu lock to fuse/dir.c It was assuming that 'task' is some other process but in fact this parameter always equals to 'current'. Inline this parameter to make it more readable and remove RCU lock as it is not needed when access current process credentials. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-31perf: Document the ABI of perf sysfs entriesSukadev Bhattiprolu
This patchset addes two new sets of files to sysfs for POWER architecture. - perf event config format in /sys/devices/cpu/format/event - generic and POWER-specific perf events in /sys/devices/cpu/events/ The format of the first file is already documented in: sysfs-bus-event_source-devices-format Document the format of the second set of files '/sys/devices/cpu/events/*' which would also become part of the ABI. Changelog[v4]: [Jiri Olsa]: Mention that multiple event= like terms can be specified in the 'events' file. [Jiri Olsa]: Remove the documentation for the 'config format' file as it is already documented in 'Documentation/ABI/testing/'. [Jiri Olsa]: Move ABI documentation from 'stable/' to 'testing/' Changelog[v3]: [Greg KH] Include ABI documentation. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anton Blanchard <anton@au1.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20130123062645.GG13720@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31perf/POWER7: Make some POWER7 events available in sysfsSukadev Bhattiprolu
Make some POWER7-specific perf events available in sysfs. $ /bin/ls -1 /sys/bus/event_source/devices/cpu/events/ branch-instructions branch-misses cache-misses cache-references cpu-cycles instructions PM_BRU_FIN PM_BRU_MPRED PM_CMPLU_STALL PM_CYC PM_GCT_NOSLOT_CYC PM_INST_CMPL PM_LD_MISS_L1 PM_LD_REF_L1 stalled-cycles-backend stalled-cycles-frontend where the 'PM_*' events are POWER specific and the others are the generic events. This will enable users to specify these events with their symbolic names rather than with their raw code. perf stat -e 'cpu/PM_CYC' ... Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anton Blanchard <anton@au1.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20130123062528.GE13720@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31perf/POWER7: Make generic event translations available in sysfsSukadev Bhattiprolu
Make the generic perf events in POWER7 available via sysfs. $ ls /sys/bus/event_source/devices/cpu/events branch-instructions branch-misses cache-misses cache-references cpu-cycles instructions stalled-cycles-backend stalled-cycles-frontend $ cat /sys/bus/event_source/devices/cpu/events/cache-misses event=0x400f0 This patch is based on commits that implement this functionality on x86. Eg: commit a47473939db20e3961b200eb00acf5fcf084d755 Author: Jiri Olsa <jolsa@redhat.com> Date: Wed Oct 10 14:53:11 2012 +0200 perf/x86: Make hardware event translations available in sysfs Changelog:[v2] [Jiri Osla] Drop EVENT_ID() macro since it is only used once. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anton Blanchard <anton@au1.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20130123062454.GD13720@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31perf: Make EVENT_ATTR globalSukadev Bhattiprolu
Rename EVENT_ATTR() to PMU_EVENT_ATTR() and make it global so it is available to all architectures. Further to allow architectures flexibility, have PMU_EVENT_ATTR() pass in the variable name as a parameter. Changelog[v2] - [Jiri Olsa] No need to define PMU_EVENT_PTR() Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anton Blanchard <anton@au1.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20130123062422.GC13720@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31perf/Power7: Use macros to identify perf eventsSukadev Bhattiprolu
Define and use macros to identify perf events codes This would make it easier and more readable when these event codes need to be used in more than one place. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anton Blanchard <anton@au1.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20130123062353.GB13720@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31perf evlist: Add --group optionNamhyung Kim
Add '-g/--group' option for showing event groups. For simplicity it is currently not compatible with other options. $ perf evlist --group {ref-cycles,cycles} $ perf evlist ref-cycles cycles Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1358845787-1350-20-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31perf report: Add report.group config optionNamhyung Kim
Add report.group config option for setting default value of event group view. It affects the report output only if perf.data contains event group info. A user can write .perfconfig file like below to enable group view by default: $ cat ~/.perfconfig [report] group = true And it can be disabled through command line: $ perf report --no-group Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1358845787-1350-19-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-31perf report: Add --group optionNamhyung Kim
Add --group option to enable event grouping. When enabled, all the group members information will be shown together with the leader. $ perf report --group ... # group: {ref-cycles,cycles} # ======== # # Samples: 7K of event 'anon group { ref-cycles, cycles }' # Event count (approx.): 6876107743 # # Overhead Command Shared Object Symbol # ................ ....... ................. .......................... # 99.84% 99.76% noploop noploop [.] main 0.07% 0.00% noploop ld-2.15.so [.] strcmp 0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del 0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu 0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time 0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask 0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe 0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock 0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page 0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks 0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1358845787-1350-18-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-19 15:05:47 +0000