| Age | Commit message (Collapse) | Author |
|---|
|
Pull fsverity updates from Eric Biggers:
"Fix the longstanding implementation limitation that fsverity was only
supported when the Merkle tree block size, filesystem block size, and
PAGE_SIZE were all equal.
Specifically, add support for Merkle tree block sizes less than
PAGE_SIZE, and make ext4 support fsverity on filesystems where the
filesystem block size is less than PAGE_SIZE.
Effectively, this means that fsverity can now be used on systems with
non-4K pages, at least on ext4. These changes have been tested using
the verity group of xfstests, newly updated to cover the new code
paths.
Also update fs/verity/ to support verifying data from large folios.
There's also a similar patch for fs/crypto/, to support decrypting
data from large folios, which I'm including in here to avoid a merge
conflict between the fscrypt and fsverity branches"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fscrypt: support decrypting data from large folios
fsverity: support verifying data from large folios
fsverity.rst: update git repo URL for fsverity-utils
ext4: allow verity with fs block size < PAGE_SIZE
fs/buffer.c: support fsverity in block_read_full_folio()
f2fs: simplify f2fs_readpage_limit()
ext4: simplify ext4_readpage_limit()
fsverity: support enabling with tree block size < PAGE_SIZE
fsverity: support verification with tree block size < PAGE_SIZE
fsverity: replace fsverity_hash_page() with fsverity_hash_block()
fsverity: use EFBIG for file too large to enable verity
fsverity: store log2(digest_size) precomputed
fsverity: simplify Merkle tree readahead size calculation
fsverity: use unsigned long for level_start
fsverity: remove debug messages and CONFIG_FS_VERITY_DEBUG
fsverity: pass pos and size to ->write_merkle_tree_block
fsverity: optimize fsverity_cleanup_inode() on non-verity files
fsverity: optimize fsverity_prepare_setattr() on non-verity files
fsverity: optimize fsverity_file_open() on non-verity files
|
|
Pull fscrypt updates from Eric Biggers:
"Simplify the implementation of the test_dummy_encryption mount option
by adding the 'test dummy key' on-demand"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: clean up fscrypt_add_test_dummy_key()
fs/super.c: stop calling fscrypt_destroy_keyring() from __put_super()
f2fs: stop calling fscrypt_add_test_dummy_key()
ext4: stop calling fscrypt_add_test_dummy_key()
fscrypt: add the test dummy encryption key on-demand
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"The most noticeable feature for this cycle is per-CPU kthread
decompression since Android use cases need low-latency I/O handling in
order to ensure the app runtime performance, currently unbounded
workqueue latencies are not quite good for production on many aarch64
hardwares and thus we need to introduce a deterministic expectation
for these. Decompression is CPU-intensive and it is sleepable for
EROFS, so other alternatives like decompression under softirq contexts
are not considered. More details are in the corresponding commit
message.
Others are random cleanups around the whole codebase and we will
continue to clean up further in the next few months.
Due to Lunar New Year holidays, some other new features were not
completely reviewed and solidified as expected and we may delay them
into the next version.
Summary:
- Add per-cpu kthreads for low-latency decompression for Android use
cases
- Get rid of tagged pointer helpers since they are rarely used now
- Several code cleanups to reduce codebase
- Documentation and MAINTAINERS updates"
* tag 'erofs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (21 commits)
erofs: fix an error code in z_erofs_init_zip_subsystem()
erofs: unify anonymous inodes for blob
erofs: relinquish volume with mutex held
erofs: maintain cookies of share domain in self-contained list
erofs: remove unused device mapping in meta routine
MAINTAINERS: erofs: Add Documentation/ABI/testing/sysfs-fs-erofs
Documentation/ABI: sysfs-fs-erofs: update supported features
erofs: remove unused EROFS_GET_BLOCKS_RAW flag
erofs: update print symbols for various flags in trace
erofs: make kobj_type structures constant
erofs: add per-cpu threads for decompression as an option
erofs: tidy up internal.h
erofs: get rid of z_erofs_do_map_blocks() forward declaration
erofs: move zdata.h into zdata.c
erofs: remove tagged pointer helpers
erofs: avoid tagged pointers to mark sync decompression
erofs: get rid of erofs_inode_datablocks()
erofs: simplify iloc()
erofs: get rid of debug_one_dentry()
erofs: remove linux/buffer_head.h dependency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs acl update from Christian Brauner:
"This contains a single update to the internal get acl method and
replaces an open-coded cmpxchg() comparison with with try_cmpxchg().
It's clearer and also beneficial on some architectures"
* tag 'fs.acl.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
posix_acl: Use try_cmpxchg in get_acl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs hardening update from Christian Brauner:
"Jan pointed out that during shutdown both filp_close() and super block
destruction will use basic printk logging when bugs are detected. This
causes issues in a few scenarios:
- Tools like syzkaller cannot figure out that the logged message
indicates a bug.
- Users that explicitly opt in to have the kernel bug on data
corruption by selecting CONFIG_BUG_ON_DATA_CORRUPTION should see
the kernel crash when they did actually select that option.
- When there are busy inodes after the superblock is shut down later
access to such a busy inodes walks through freed memory. It would
be better to cleanly crash instead.
All of this can be addressed by using the already existing
CHECK_DATA_CORRUPTION() macro in these places when kernel bugs are
detected. Its logging improvement is useful for all users.
Otherwise this only has a meaningful behavioral effect when users do
select CONFIG_BUG_ON_DATA_CORRUPTION which means this is backward
compatible for regular users"
* tag 'fs.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: Use CHECK_DATA_CORRUPTION() when kernel bugs are detected
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b42 ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
|
|
Despite that prev_hop is used conditionally on cur_hop
is not the first hop, it's initialized unconditionally.
Because initialization implies dereferencing, it might happen
that the code dereferences uninitialized memory, which has been
spotted by KASAN. Fix it by reorganizing hop_cmp() logic.
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Fixes: cd7f55359c90 ("sched: add sched_numa_find_nth_cpu()")
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/Y+7avK6V9SyAWsXi@yury-laptop/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull i_version updates from Jeff Layton:
"This overhauls how we handle i_version queries from nfsd.
Instead of having special routines and grabbing the i_version field
directly out of the inode in some cases, we've moved most of the
handling into the various filesystems' getattr operations. As a bonus,
this makes ceph's change attribute usable by knfsd as well.
This should pave the way for future work to make this value queryable
by userland, and to make it more resilient against rolling back on a
crash"
* tag 'iversion-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
nfsd: remove fetch_iversion export operation
nfsd: use the getattr operation to fetch i_version
nfsd: move nfsd4_change_attribute to nfsfh.c
ceph: report the inode version in getattr if requested
nfs: report the inode version in getattr if requested
vfs: plumb i_version handling into struct kstat
fs: clarify when the i_version counter must be updated
fs: uninline inode_query_iversion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"The main change here is that I've broken out most of the file locking
definitions into a new header file. I also went ahead and completed
the removal of locks_inode function"
* tag 'locks-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fs: remove locks_inode
filelock: move file locking definitions to separate header file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"In additon to bug fixes, these are noteworthy changes:
- In TPM I2C drivers, migrate from probe() to probe_new() (a new
driver model in I2C).
- TPM CRB: Pluton support
- Add duplicate hash detection to the blacklist keyring in order to
give more meaningful klog output than e.g. [1]"
Link: https://askubuntu.com/questions/1436856/ubuntu-22-10-blacklist-problem-blacklisting-hash-13-message-on-boot [1]
* tag 'tpm-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: add vendor flag to command code validation
tpm: Add reserved memory event log
tpm: Use managed allocation for bios event log
tpm: tis_i2c: Convert to i2c's .probe_new()
tpm: tpm_i2c_nuvoton: Convert to i2c's .probe_new()
tpm: tpm_i2c_infineon: Convert to i2c's .probe_new()
tpm: tpm_i2c_atmel: Convert to i2c's .probe_new()
tpm: st33zp24: Convert to i2c's .probe_new()
KEYS: asymmetric: Fix ECDSA use via keyctl uapi
certs: don't try to update blacklist keys
KEYS: Add new function key_create()
certs: make blacklisted hash available in klog
tpm_crb: Add support for CRB devices based on Pluton
crypto: certs: fix FIPS selftest dependency
|
|
Pull Rust updates from Miguel Ojeda:
"More core additions, getting closer to a point where the first Rust
modules can be upstreamed. The major ones being:
- Sync: new types 'Arc', 'ArcBorrow' and 'UniqueArc'.
- Types: new trait 'ForeignOwnable' and new type 'ScopeGuard'.
There is also a substantial removal in terms of lines:
- 'alloc' crate: remove the 'borrow' module (type 'Cow' and trait
'ToOwned')"
* tag 'rust-6.3' of https://github.com/Rust-for-Linux/linux:
rust: delete rust-project.json when running make clean
rust: MAINTAINERS: Add the zulip link
rust: types: implement `ForeignOwnable` for `Arc<T>`
rust: types: implement `ForeignOwnable` for the unit type
rust: types: implement `ForeignOwnable` for `Box<T>`
rust: types: introduce `ForeignOwnable`
rust: types: introduce `ScopeGuard`
rust: prelude: prevent doc inline of external imports
rust: sync: add support for dispatching on Arc and ArcBorrow.
rust: sync: introduce `UniqueArc`
rust: sync: allow type of `self` to be `ArcBorrow<T>`
rust: sync: introduce `ArcBorrow`
rust: sync: allow coercion from `Arc<T>` to `Arc<U>`
rust: sync: allow type of `self` to be `Arc<T>` or variants
rust: sync: add `Arc` for ref-counted allocations
rust: compiler_builtins: make stubs non-global
rust: alloc: remove the `borrow` module (`ToOwned`, `Cow`)
|
|
When building a kernel with many debug options enabled (which happens in
test configurations use by myself and syzbot), the kernel can become
large enough that portions of .text can be more than 128M away from
.idmap.text (which is placed inside the .rodata section). Where idmap
code branches into .text, the linker will place veneers in the
.idmap.text section to make those branches possible.
Unfortunately, as Ard reports, GNU LD has bseen observed to add 4K of
padding when adding such veneers, e.g.
| .idmap.text 0xffffffc01e48e5c0 0x32c arch/arm64/mm/proc.o
| 0xffffffc01e48e5c0 idmap_cpu_replace_ttbr1
| 0xffffffc01e48e600 idmap_kpti_install_ng_mappings
| 0xffffffc01e48e800 __cpu_setup
| *fill* 0xffffffc01e48e8ec 0x4
| .idmap.text.stub
| 0xffffffc01e48e8f0 0x18 linker stubs
| 0xffffffc01e48f8f0 __idmap_text_end = .
| 0xffffffc01e48f000 . = ALIGN (0x1000)
| *fill* 0xffffffc01e48f8f0 0x710
| 0xffffffc01e490000 idmap_pg_dir = .
This makes the __idmap_text_start .. __idmap_text_end region bigger than
the 4K we require it to fit within, and triggers an assertion in arm64's
vmlinux.lds.S, which breaks the build:
| LD .tmp_vmlinux.kallsyms1
| aarch64-linux-gnu-ld: ID map text too big or misaligned
| make[1]: *** [scripts/Makefile.vmlinux:35: vmlinux] Error 1
| make: *** [Makefile:1264: vmlinux] Error 2
Avoid this by using an `ADRP+ADD+BLR` sequence for branches out of
.idmap.text, which avoids the need for veneers. These branches are only
executed once per boot, and only when the MMU is on, so there should be
no noticeable performance penalty in replacing `BL` with `ADRP+ADD+BLR`.
At the same time, remove the "x" and "w" attributes when placing code in
.idmap.text, as these are not necessary, and this will prevent the
linker from assuming that it is safe to place PLTs into .idmap.text,
causing it to warn if and when there are out-of-range branches within
.idmap.text, e.g.
| LD .tmp_vmlinux.kallsyms1
| arch/arm64/kernel/head.o: in function `primary_entry':
| (.idmap.text+0x1c): relocation truncated to fit: R_AARCH64_CALL26 against symbol `dcache_clean_poc' defined in .text section in arch/arm64/mm/cache.o
| arch/arm64/kernel/head.o: in function `init_el2':
| (.idmap.text+0x88): relocation truncated to fit: R_AARCH64_CALL26 against symbol `dcache_clean_poc' defined in .text section in arch/arm64/mm/cache.o
| make[1]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
| make: *** [Makefile:1252: vmlinux] Error 2
Thus, if future changes add out-of-range branches in .idmap.text, it
should be easy enough to identify those from the resulting linker
errors.
Reported-by: syzbot+f8ac312e31226e23302b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-arm-kernel/00000000000028ea4105f4e2ef54@google.com/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230220162317.1581208-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
If the MR allocate failed, the MR recovery work not initialized
and list not cleared. Then will be warning and UAF when release
the MR:
WARNING: CPU: 4 PID: 824 at kernel/workqueue.c:3066 __flush_work.isra.0+0xf7/0x110
CPU: 4 PID: 824 Comm: mount.cifs Not tainted 6.1.0-rc5+ #82
RIP: 0010:__flush_work.isra.0+0xf7/0x110
Call Trace:
<TASK>
__cancel_work_timer+0x2ba/0x2e0
smbd_destroy+0x4e1/0x990
_smbd_get_connection+0x1cbd/0x2110
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
BUG: KASAN: use-after-free in smbd_destroy+0x4fc/0x990
Read of size 8 at addr ffff88810b156a08 by task mount.cifs/824
CPU: 4 PID: 824 Comm: mount.cifs Tainted: G W 6.1.0-rc5+ #82
Call Trace:
dump_stack_lvl+0x34/0x44
print_report+0x171/0x472
kasan_report+0xad/0x130
smbd_destroy+0x4fc/0x990
_smbd_get_connection+0x1cbd/0x2110
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Allocated by task 824:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7a/0x90
_smbd_get_connection+0x1b6f/0x2110
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 824:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x143/0x1b0
__kmem_cache_free+0xc8/0x330
_smbd_get_connection+0x1c6a/0x2110
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Let's initialize the MR recovery work before MR allocate to prevent
the warning, remove the MRs from the list to prevent the UAF.
Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If the MR allocate failed, the smb direct connection info is NULL,
then smbd_destroy() will directly return, then the connection info
will be leaked.
Let's set the smb direct connection info to the server before call
smbd_destroy().
Fixes: c7398583340a ("CIFS: SMBD: Implement RDMA memory registration")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If we did not get a lease we can still return a single use cfid to the caller.
The cfid will not have has_lease set and will thus not be shared with any
other concurrent users and will be freed immediately when the caller
drops the handle.
This avoids extra roundtrips for servers that do not support directory leases
where they would first fail to get a cfid with a lease and then fallback
to try a normal SMB2_open()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Some servers may return that we got a lease in rsp->OplockLevel
but then in the lease context contradict this and say we got no lease
at all. Thus we need to check the context if we have a lease.
Additionally, If we do not get a lease we need to make sure we close
the handle before we return an error to the caller.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The kernel is globally removing the ambiguous 0-length and 1-element
arrays in favor of flexible arrays, so that we can gain both compile-time
and run-time array bounds checking[1].
Replace the trailing 1-element array with a flexible array in the
following structures:
struct cifs_spnego_msg
struct cifs_quota_data
struct get_dfs_referral_rsp
struct file_alt_name_info
NEGOTIATE_RSP
SESSION_SETUP_ANDX
TCONX_REQ
TCONX_RSP
TCONX_RSP_EXT
ECHO_REQ
ECHO_RSP
OPEN_REQ
OPENX_REQ
LOCK_REQ
RENAME_REQ
COPY_REQ
COPY_RSP
NT_RENAME_REQ
DELETE_FILE_REQ
DELETE_DIRECTORY_REQ
CREATE_DIRECTORY_REQ
QUERY_INFORMATION_REQ
SETATTR_REQ
TRANSACT_IOCTL_REQ
TRANSACT_CHANGE_NOTIFY_REQ
TRANSACTION2_QPI_REQ
TRANSACTION2_SPI_REQ
TRANSACTION2_FFIRST_REQ
TRANSACTION2_GET_DFS_REFER_REQ
FILE_UNIX_LINK_INFO
FILE_DIRECTORY_INFO
FILE_FULL_DIRECTORY_INFO
SEARCH_ID_FULL_DIR_INFO
FILE_BOTH_DIRECTORY_INFO
FIND_FILE_STANDARD_INFO
Replace the trailing 1-element array with a flexible array, but leave
the existing structure padding:
FILE_ALL_INFO
FILE_UNIX_INFO
Remove unused structures:
struct gea
struct gealist
Adjust all related size calculations to match the changes to sizeof().
No machine code output differences are produced after these changes.
[1] For lots of details, see both:
https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays
https://people.kernel.org/kees/bounded-flexible-arrays-in-c
Cc: Steve French <sfrench@samba.org>
Cc: Paulo Alcantara <pc@cjr.nz>
Cc: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The kernel is globally removing the ambiguous 0-length and 1-element
arrays in favor of flexible arrays, so that we can gain both compile-time
and run-time array bounds checking[1].
While struct fealist is defined as a "fake" flexible array (via a
1-element array), it is only used for examination of the first array
element. Walking the list is performed separately, so there is no reason
to treat the "list" member of struct fealist as anything other than a
single entry. Adjust the struct and code to match.
Additionally, struct fea uses the "name" member either as a dynamic
string, or is manually calculated from the start of the struct. Redefine
the member as a flexible array.
No machine code output differences are produced after these changes.
[1] For lots of details, see both:
https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays
https://people.kernel.org/kees/bounded-flexible-arrays-in-c
Cc: Steve French <sfrench@samba.org>
Cc: Paulo Alcantara <pc@cjr.nz>
Cc: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The client was sending rfc1002 session request packet with a wrong
length field set, therefore failing to mount shares against old SMB
servers over port 139.
Fix this by calculating the correct length as specified in rfc1002.
Fixes: d7173623bf0b ("cifs: use ALIGN() and round_up() macros")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use a struct assignment with implicit member initialization
Signed-off-by: Volker Lendecke <vl@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Due to the 2bytes of padding from the smb2 tree connect request,
there is an unneeded difference between the rfc1002 length and the actual
frame length. In the case of windows client, it is sent by matching it
exactly.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are no more callers; remove this function before any more appear.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Avoids many calls to compound_head() and removes calls to various
compat functions.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
oparms was not fully initialized
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The aim of using encryption on a connection is to keep
the data confidential, so we must not use plaintext rdma offload
for that data!
It seems that current windows servers and ksmbd would allow
this, but that's no reason to expose the users data in plaintext!
And servers hopefully reject this in future.
Note modern windows servers support signed or encrypted offload,
see MS-SMB2 2.2.3.1.6 SMB2_RDMA_TRANSFORM_CAPABILITIES, but we don't
support that yet.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We should have the logic to decide if we want rdma offload
in a single spot in order to advance it in future.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This will simplify the following changes and makes it easy to get
in passed in from the caller in future.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Just have @skip set to 0 after first iterations of the two nested
loops.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
to waiting the server to be reconnected in smb2_reconnect(). It is
set in cifs_tcp_ses_needs_reconnect() and protected by
TCP_Server_Info::srv_lock.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The options that are displayed for the smb3.1.1/cifs client
in "make menuconfig" are confusing because some of them are
not indented making them not appear to be related to cifs.ko
Fix that by adding an if/endif (similar to what ceph and 9pm did)
if fs/cifs/Kconfig
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There were various outdated or missing things in fs/cifs/Kconfig
e.g. mention of support for insecure NTLM which has been removed,
and lack of mention of some important features. This also shortens
it slightly, and fixes some confusing text (e.g. the SMB1 POSIX
extensions option).
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In the smb2_get_aead_req() the skip variable is used only for
the very first iteration of the two nested loops, which means
it's basically in invariant to those loops. Hence, instead of
using conditional on each iteration, unconditionally assign
the 'skip' variable before the loops and at the end of the
inner loop.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We store the last updated time for interface list while
parsing the interfaces. This change is to just print that
info in DebugData.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Zero-length arrays are deprecated[1] and we are moving towards
adopting C99 flexible-array members instead. So, replace zero-length
arrays in a couple of structures with flex-array members.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [2].
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays [1]
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2]
Link: https://github.com/KSPP/linux/issues/78
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Paulo Alcantara <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Paulo Alcantara <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee
Pull TEE update from Jens Wiklander:
"Remove get_kernel_pages()
Vmalloc page support is removed from shm_get_kernel_pages() and the
get_kernel_pages() call is replaced by calls to get_page(). With no
remaining callers of get_kernel_pages() the function is removed"
[ This looks like it's just some random 'tee' cleanup, but the bigger
picture impetus for this is really to to to remove historical
confusion with mixed use of kernel virtual addresses and 'struct page'
pointers.
Kernel virtual pointers in the vmalloc space is then particularly
confusing - both for looking up a page pointer (when trying to then
unify a "virtual address or page" interface) and _particularly_ when
mixed with HIGHMEM support and the kmap*() family of remapping.
This is particularly true with HIGHMEM getting much less test coverage
with 32-bit architectures being increasingly legacy targets.
So we actively wanted to remove get_kernel_pages() to make sure nobody
else used it too, and thus the 'tee' part is "finally remove last
user".
See also commit 6647e76ab623 ("v4l2: don't fall back to follow_pfn()
if pin_user_pages_fast() fails") for a totally different version of a
conceptually similar "let's stop this confusion of different ways of
referring to memory". - Linus ]
* tag 'remove-get_kernel_pages-for-6.3' of https://git.linaro.org/people/jens.wiklander/linux-tee:
mm: Remove get_kernel_pages()
tee: Remove call to get_kernel_pages()
tee: Remove vmalloc page support
highmem: Enhance is_kmap_addr() to check kmap_local_page() mappings
|
|
Pointer variables of void * type do not require type cast.
Signed-off-by: XU pengfei <xupengfei@nfschina.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The do_send_email() will call die before restoring stty if sendmail
setting is not correct or sendmail is not installed. It is safer to
restore it in the beginning of dodie().
Link: https://lkml.kernel.org/r/167420617635.2988775.13045295332829029437.stgit@devnote3
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.
Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".
But this fixes the hang that happens when the pipe is full and the ssh
session never exits.
Cc: stable@vger.kernel.org
Fixes: 6e98d1b4415fe ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When monitoring the console output, the stdout is being redirected to do
so. If Ctrl^C is hit during this mode, the stdout is not back to the
console, the user does not see anything they type (no echo).
Add "end_monitor" to the SIGINT interrupt handler to give back the console
on Ctrl^C.
Cc: stable@vger.kernel.org
Fixes: 9f2cdcbbb90e7 ("ktest: Give console process a dedicated tty")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.
In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.
Cc: stable@vger.kernel.org
Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The pointer dentry is assigned a value that is never read, the
assignment is redundant and can be removed.
Cleans up clang-scan warning:
fs/nfsd/nfsctl.c:1231:2: warning: Value stored to 'dentry' is
never read [deadcode.DeadStores]
dentry = ERR_PTR(ret);
No need to initialize "int ret = -ENOMEM;" either.
These are vestiges of nfsd_mkdir(), from whence I copied
nfsd_symlink().
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, we're only memcpy'ing the first __be32. Ensure we copy into
both words.
Fixes: 91d2e9b56cf5 ("NFSD: Clean up the nfsd_net::nfssvc_boot field")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Most of the time, NFSv4 clients issue a COMMIT before the final CLOSE of
an open stateid, so with NFSv4, the fsync in the nfsd_file_free path is
usually a no-op and doesn't block.
We have a customer running knfsd over very slow storage (XFS over Ceph
RBD). They were using the "async" export option because performance was
more important than data integrity for this application. That export
option turns NFSv4 COMMIT calls into no-ops. Due to the fsync in this
codepath however, their final CLOSE calls would still stall (since a
CLOSE effectively became a COMMIT).
I think this fsync is not strictly necessary. We only use that result to
reset the write verifier. Instead of fsync'ing all of the data when we
free an nfsd_file, we can just check for writeback errors when one is
acquired and when it is freed.
If the client never comes back, then it'll never see the error anyway
and there is no point in resetting it. If an error occurs after the
nfsd_file is removed from the cache but before the inode is evicted,
then it will reset the write verifier on the next nfsd_file_acquire,
(since there will be an unseen error).
The only exception here is if something else opens and fsyncs the file
during that window. Given that local applications work with this
limitation today, I don't see that as an issue.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2166658
Fixes: ac3a2585f018 ("nfsd: rework refcounting in filecache")
Reported-and-tested-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I'm guessing that the warning fired because there's some code path
that is called on module unload where the gss_krb5_enctypes file
was never set up.
name 'gss_krb5_enctypes'
WARNING: CPU: 0 PID: 6187 at fs/proc/generic.c:712 remove_proc_entry+0x38d/0x460 fs/proc/generic.c:712
destroy_krb5_enctypes_proc_entry net/sunrpc/auth_gss/svcauth_gss.c:1543 [inline]
gss_svc_shutdown_net+0x7d/0x2b0 net/sunrpc/auth_gss/svcauth_gss.c:2120
ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169
setup_net+0x9bd/0xe60 net/core/net_namespace.c:356
copy_net_ns+0x320/0x6b0 net/core/net_namespace.c:483
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
copy_namespaces+0x410/0x500 kernel/nsproxy.c:179
copy_process+0x311d/0x76b0 kernel/fork.c:2272
kernel_clone+0xeb/0x9a0 kernel/fork.c:2684
__do_sys_clone+0xba/0x100 kernel/fork.c:2825
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reported-by: syzbot+04a8437497bcfb4afa95@syzkaller.appspotmail.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The nested if statements here make no sense, as you can never reach
"else" branch in the nested statement. Fix the error handling for
when there is a courtesy client that holds a conflicting deny mode.
Fixes: 3d6942715180 ("NFSD: add support for share reservation conflict to courteous server")
Reported-by: 張智諺 <cc85nod@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When nfsd4_copy fails to allocate memory for async_copy->cp_src, or
nfs4_init_copy_state fails, it calls cleanup_async_copy to do the
cleanup for the async_copy which causes page fault since async_copy
is not yet initialized.
This patche rearranges the order of initializing the fields in
async_copy and adds checks in cleanup_async_copy to skip un-initialized
fields.
Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Fixes: 87689df69491 ("NFSD: Shrink size of struct nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Its possible for __break_lease to find the layout's lease before we've
added the layout to the owner's ls_layouts list. In that case, setting
ls_recalled = true without actually recalling the layout will cause the
server to never send a recall callback.
Move the check for ls_layouts before setting ls_recalled.
Fixes: c5c707f96fc9 ("nfsd: implement pNFS layout recalls")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We had a bug report that xfstest generic/355 was failing on NFSv4.0.
This test sets various combinations of setuid/setgid modes and tests
whether DIO writes will cause them to be stripped.
What I found was that the server did properly strip those bits, but
the client didn't notice because it held a delegation that was not
recalled. The recall didn't occur because the client itself was the
one generating the activity and we avoid recalls in that case.
Clearing setuid bits is an "implicit" activity. The client didn't
specifically request that we do that, so we need the server to issue a
CB_RECALL, or avoid the situation entirely by not issuing a delegation.
The easiest fix here is to simply not give out a delegation if the file
is being opened for write, and the mode has the setuid and/or setgid bit
set. Note that there is a potential race between the mode and lease
being set, so we test for this condition both before and after setting
the lease.
This patch fixes generic/355, generic/683 and generic/684 for me. (Note
that 355 fails only on v4.0, and 683 and 684 require NFSv4.2 to run and
fail).
Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There's no need for the cost of this extra virtual function call
during every RPC transaction: the RQ_SECURE bit can be set properly
in ->xpo_recvfrom() instead.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
