summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-21iommu/arm-smmu-v3: Manage ASIDs with xarrayJean-Philippe Brucker
In preparation for sharing some ASIDs with the CPU, use a global xarray to store ASIDs and their context. ASID#0 is now reserved, and the ASID space is global. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/20200519175502.2504091-9-jean-philippe@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-18iommu/arm-smmu-v3: Don't reserve implementation defined register spaceJean-Philippe Brucker
Some SMMUv3 implementation embed the Perf Monitor Group Registers (PMCG) inside the first 64kB region of the SMMU. Since PMCG are managed by a separate driver, this layout causes resource reservation conflicts during boot. To avoid this conflict, don't reserve the MMIO regions that are implementation defined. Although devm_ioremap_resource() still works on full pages under the hood, this way we benefit from resource conflict checks. Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20200513110255.597203-1-jean-philippe@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-18iommu/arm-smmu-qcom: Request direct mapping for modem deviceSibi Sankar
The modem remote processor has two access paths to DDR. One path is directly connected to DDR and another path goes through an SMMU. The SMMU path is configured to be a direct mapping because it's used by various peripherals in the modem subsystem. Typically this direct mapping is configured statically at EL2 by QHEE (Qualcomm's Hypervisor Execution Environment) before the kernel is entered. In certain firmware configuration, especially when the kernel is already in full control of the SMMU, defer programming the modem SIDs to the kernel. Let's add compatibles here so that we can have the kernel program the SIDs for the modem in these cases. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200511175532.25874-1-sibis@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-18iommu/arm-smmu-v3: remove set but not used variable 'smmu'Chen Zhou
Fixes gcc '-Wunused-but-set-variable' warning: drivers/iommu/arm-smmu-v3.c:2989:26: warning: variable ‘smmu’ set but not used [-Wunused-but-set-variable] struct arm_smmu_device *smmu; Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Link: https://lore.kernel.org/r/20200508014955.87630-1-chenzhou10@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-05-07dt-bindings: arm-smmu: Allow mmu-400, smmu-v1 compatibleAndre Przywara
The Arm SMMUv1 DT binding only allows combining arm,mmu-401 with arm,smmu-v1, even though the MMU-400 is compatible as well. Allow this combination as well to let the Arm Juno board pass the test. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20200507112430.183940-2-andre.przywara@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-05-07arm64: dts: qcom: sdm845-cheza: Add iommus propertySibi Sankar
Add iommus property to remoteproc modem node. Following SMMU global faults are seen without it. arm-smmu 15000000.iommu: Unexpected global fault, this could be serious arm-smmu 15000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000781, GFSYNR2 0x00000000 arm-smmu 15000000.iommu: Unexpected global fault, this could be serious arm-smmu 15000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000461, GFSYNR2 0x00000000 Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/r/38c607841e81664a2db69a27260cd7dfbd653458.1587407458.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-07dt-bindings: remoteproc: qcom: Add iommus propertySibi Sankar
Add iommus property to allow Q6 modem to boot on platforms which do not have trustZone. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/561e9b42b8665fc9712fdb40a525ab8871fcbdac.1587407458.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-07iommu/arm-smmu: Allow client devices to select direct mappingJordan Crouse
Some client devices want to directly map the IOMMU themselves instead of using the DMA domain. Allow those devices to opt in to direct mapping by way of a list of compatible strings. Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/7cf1f64167b5545b7f42275395be1f1e2ea3a6ac.1587407458.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-07iommu/arm-smmu: Implement iommu_ops->def_domain_type call-backSai Prakash Ranjan
Implement the new def_domain_type call-back for the ARM SMMU driver. We need this to support requesting the domain type by the client devices. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/28c5d101cc4ac29aff3553ecec7cf256d0907ed7.1587407458.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-07iommu: arm-smmu-impl: Convert to a generic reset implementationSai Prakash Ranjan
Currently the QCOM specific smmu reset implementation is very specific to SDM845 SoC and has a wait-for-safe logic which may not be required for other SoCs. So move the SDM845 specific logic to its specific reset function. Also add SC7180 SMMU compatible for calling into QCOM specific implementation. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/d24a0278021bc0b2732636c5728efe55e7318a8b.1587407458.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-07iommu/arm-smmu: Make remove callback message more informativeSai Prakash Ranjan
Currently on reboot/shutdown, the following messages are displayed on the console as error messages before the system reboots/shutdown as part of remove callback. On SC7180: arm-smmu 15000000.iommu: removing device with active domains! arm-smmu 5040000.iommu: removing device with active domains! Make this error message more informative and less scary. Reported-by: Douglas Anderson <dianders@chromium.org> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200423095531.9868-1-saiprakash.ranjan@codeaurora.org [will: use dev_notice() as per Robin] Signed-off-by: Will Deacon <will@kernel.org>
2020-05-05iommu: Unexport iommu_group_get_for_dev()Joerg Roedel
The function is now only used in IOMMU core code and shouldn't be used outside of it anyway, so remove the export for it. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-35-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Move more initialization to __iommu_probe_device()Joerg Roedel
Move the calls to dev_iommu_get() and try_module_get() into __iommu_probe_device(), so that the callers don't have to do it on their own. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-34-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Remove add_device()/remove_device() code-pathsJoerg Roedel
All drivers are converted to use the probe/release_device() call-backs, so the add_device/remove_device() pointers are unused and the code using them can be removed. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-33-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/exynos: Convert to probe/release_device() call-backsJoerg Roedel
Convert the Exynos IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-32-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/exynos: Use first SYSMMU in controllers list for IOMMU coreJoerg Roedel
On Exynos platforms there can be more than one SYSMMU (IOMMU) for one DMA master device. Since the IOMMU core code expects only one hardware IOMMU, use the first SYSMMU in the list. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-31-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/omap: Convert to probe/release_device() call-backsJoerg Roedel
Convert the OMAP IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-30-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/omap: Remove orphan_dev trackingJoerg Roedel
Remove the tracking of device which could not be probed because their IOMMU is not probed yet. Replace it with a call to bus_iommu_probe() when a new IOMMU is probed. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-29-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/renesas: Convert to probe/release_device() call-backsJoerg Roedel
Convert the Renesas IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-28-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/tegra: Convert to probe/release_device() call-backsJoerg Roedel
Convert the Tegra IOMMU drivers to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-27-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/rockchip: Convert to probe/release_device() call-backsJoerg Roedel
Convert the Rockchip IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-26-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/qcom: Convert to probe/release_device() call-backsJoerg Roedel
Convert the QCOM IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-25-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/mediatek-v1 Convert to probe/release_device() call-backsJoerg Roedel
Convert the Mediatek-v1 IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-24-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/mediatek: Convert to probe/release_device() call-backsJoerg Roedel
Convert the Mediatek IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-23-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/msm: Convert to probe/release_device() call-backsJoerg Roedel
Convert the MSM IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-22-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/virtio: Convert to probe/release_device() call-backsJoerg Roedel
Convert the VirtIO IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-21-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/s390: Convert to probe/release_device() call-backsJoerg Roedel
Convert the S390 IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-20-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/pamu: Convert to probe/release_device() call-backsJoerg Roedel
Convert the PAMU IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-19-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/arm-smmu: Convert to probe/release_device() call-backsJoerg Roedel
Convert the arm-smmu and arm-smmu-v3 drivers to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-18-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/vt-d: Convert to probe/release_device() call-backsJoerg Roedel
Convert the Intel IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200429133712.31431-17-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/amd: Convert to probe/release_device() call-backsJoerg Roedel
Convert the AMD IOMMU Driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-16-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/amd: Remove dev_data->passthroughJoerg Roedel
Make use of generic IOMMU infrastructure to gather the same information carried in dev_data->passthrough and remove the struct member. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-15-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Export bus_iommu_probe() and make is safe for re-probingJoerg Roedel
Add a check to the bus_iommu_probe() call-path to make sure it ignores devices which have already been successfully probed. Then export the bus_iommu_probe() function so it can be used by IOMMU drivers. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-14-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Move iommu_group_create_direct_mappings() out of iommu_group_add_device()Joerg Roedel
After the previous changes the iommu group may not have a default domain when iommu_group_add_device() is called. With no default domain iommu_group_create_direct_mappings() will do nothing and no direct mappings will be created. Rename iommu_group_create_direct_mappings() to iommu_create_device_direct_mappings() to better reflect that the function creates direct mappings only for one device and not for all devices in the group. Then move the call to the places where a default domain actually exists. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-13-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Split off default domain allocation from group assignmentJoerg Roedel
When a bus is initialized with iommu-ops, all devices on the bus are scanned and iommu-groups are allocated for them, and each groups will also get a default domain allocated. Until now this happened as soon as the group was created and the first device added to it. When other devices with different default domain requirements were added to the group later on, the default domain was re-allocated, if possible. This resulted in some back and forth and unnecessary allocations, so change the flow to defer default domain allocation until all devices have been added to their respective IOMMU groups. The default domains are allocated for newly allocated groups after each device on the bus is handled and was probed by the IOMMU driver. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-12-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Move new probe_device path to separate functionJoerg Roedel
This makes it easier to remove to old code-path when all drivers are converted. As a side effect that it also fixes the error cleanup path. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-11-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Keep a list of allocated groups in __iommu_probe_device()Joerg Roedel
This is needed to defer default_domain allocation for new IOMMU groups until all devices have been added to the group. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-10-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Move default domain allocation to iommu_probe_device()Joerg Roedel
Well, not really. The call to iommu_alloc_default_domain() in iommu_group_get_for_dev() has to stay around as long as there are IOMMU drivers using the add/remove_device() call-backs instead of probe/release_device(). Those drivers expect that iommu_group_get_for_dev() returns the device attached to a group and the group set up with a default domain (and the device attached to the groups current domain). But when all drivers are converted this compatability mess can be removed. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-9-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Add probe_device() and release_device() call-backsJoerg Roedel
Add call-backs to 'struct iommu_ops' as an alternative to the add_device() and remove_device() call-backs, which will be removed when all drivers are converted. The new call-backs will not setup IOMMU groups and domains anymore, so also add a probe_finalize() call-back where the IOMMU driver can do per-device setup work which require the device to be set up with a group and a domain. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-8-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/amd: Return -ENODEV in add_device when device is not handled by IOMMUJoerg Roedel
When check_device() fails on the device, it is not handled by the IOMMU and amd_iommu_add_device() needs to return -ENODEV. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-7-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/amd: Remove dma_mask check from check_device()Joerg Roedel
The check was only needed for the DMA-API implementation in the AMD IOMMU driver, which no longer exists. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-6-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/vt-d: Wire up iommu_ops->def_domain_typeJoerg Roedel
The Intel VT-d driver already has a matching function to determine the default domain type for a device. Wire it up in intel_iommu_ops. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200429133712.31431-5-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu/amd: Implement iommu_ops->def_domain_type call-backJoerg Roedel
Implement the new def_domain_type call-back for the AMD IOMMU driver. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-4-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Add def_domain_type() callback in iommu_opsSai Praneeth Prakhya
Some devices are reqired to use a specific type (identity or dma) of default domain when they are used with a vendor iommu. When the system level default domain type is different from it, the vendor iommu driver has to request a new default domain with iommu_request_dma_domain_for_dev() and iommu_request_dm_for_dev() in the add_dev() callback. Unfortunately, these two helpers only work when the group hasn't been assigned to any other devices, hence, some vendor iommu driver has to use a private domain if it fails to request a new default one. This adds def_domain_type() callback in the iommu_ops, so that any special requirement of default domain for a device could be aware by the iommu generic layer. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> [ jroedel@suse.de: Added iommu_get_def_domain_type() function and use it to allocate the default domain ] Co-developed-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-3-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-05iommu: Move default domain allocation to separate functionJoerg Roedel
Move the code out of iommu_group_get_for_dev() into a separate function. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-2-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-04-26Linux 5.7-rc3v5.7-rc3Linus Torvalds
2020-04-26Merge tag '5.7-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Five cifs/smb3 fixes:two for DFS reconnect failover, one lease fix for stable and the others to fix a missing spinlock during reconnect" * tag '5.7-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix uninitialised lease_key in open_shroot() cifs: ensure correct super block for DFS reconnect cifs: do not share tcons with DFS cifs: minor update to comments around the cifs_tcp_ses_lock mutex cifs: protect updating server->dstaddr with a spinlock
2020-04-26Merge tag 'usb-5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB driver fixes for 5.7-rc3. Nothing huge, just the usual collection of: - xhci fixes - gadget driver fixes - syzkaller fuzzing fixes - new device ids and DT bindings - new quirks added for broken devices A few of the gadget driver fixes show up twice here as they were applied to my branch, and also by Felipe to his branch which I then pulled in as we got out of sync a bit. All of these have been in linux-next with no reported issues" * tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) USB: sisusbvga: Change port variable from signed to unsigned usb-storage: Add unusual_devs entry for JMicron JMS566 USB: hub: Revert commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices") USB: hub: Fix handling of connect changes during sleep usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer xhci: Don't clear hub TT buffer on ep0 protocol stall xhci: prevent bus suspend if a roothub port detected a over-current condition xhci: Fix handling halted endpoint even if endpoint ring appears empty usb: raw-gadget: Fix copy_to/from_user() checks usb: raw-gadget: fix raw_event_queue_fetch locking usb: gadget: udc: atmel: Fix vbus disconnect handling usb: dwc3: gadget: Fix request completion check USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE phy: tegra: Select USB_COMMON for usb_get_maximum_speed() usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset() cdc-acm: introduce a cool down cdc-acm: close race betrween suspend() and acm_softint UAS: fix deadlock in error handling and PM flushing work UAS: no use logging any details in case of ENODEV ...
2020-04-26Merge tag 'tty-5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some tty and serial driver fixes for 5.7-rc3. The "largest" in here are a number of reverts for previous changes to the uartps serial driver that turned out to not be a good idea at all. The others are just small fixes found by people and tools. Included in here is a much-reported symbol export needed by previous changes that happened in 5.7-rc1. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: hvc: fix buffer overflow during hvc_alloc(). tty: rocket, avoid OOB access tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart vt: don't hardcode the mem allocation upper bound tty: serial: owl: add "much needed" clk_prepare_enable() vt: don't use kmalloc() for the unicode screen buffer tty/sysrq: Export sysrq_mask(), sysrq_toggle_support() serial: sh-sci: Make sure status register SCxSR is read in correct sequence serial: sunhv: Initialize lock for non-registered console Revert "serial: uartps: Register own uart console and driver structures" Revert "serial: uartps: Move Port ID to device data structure" Revert "serial: uartps: Change uart ID port allocation" Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES" Revert "serial: uartps: Fix error path when alloc failed" Revert "serial: uartps: Use the same dynamic major number for all ports" Revert "serial: uartps: Fix uartps_major handling"
2020-04-26Merge tag 'char-misc-5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are 4 small misc driver fixes for 5.7-rc3: - mei driver fix - interconnect driver fix - two fpga driver fixes All have been in linux-next with no reported issues" * tag 'char-misc-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: interconnect: qcom: Fix uninitialized tcs_cmd::wait mei: me: fix irq number stored in hw struct fpga: dfl: pci: fix return value of cci_pci_sriov_configure fpga: zynq: Remove clk_get error message for probe defer
generated by cgit (git 2.34.1) at 2025-09-08 19:41:19 +0000