| Age | Commit message (Collapse) | Author |
|---|
|
of_property_match_string returns an int; either an index from 0 or
greater if successful or negative on failure. Even it's very
unlikely that the DT CPU node contains multiple enable-methods
these checks should be fixed.
This patch was inspired by the work of Nick Desaulniers.
Link: https://lore.kernel.org/lkml/20230516-sunxi-v1-1-ac4b9651a8c1@google.com/T/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231228193903.9078-2-wahrenst@gmx.net
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Running a multi-arch kernel (multi_v7_defconfig) on a Raspberry Pi 3B+
with enabled CONFIG_UBSAN triggers the following warning:
UBSAN: array-index-out-of-bounds in arch/arm/mach-sunxi/mc_smp.c:810:29
index 2 is out of range for type 'sunxi_mc_smp_data [2]'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc6-00248-g5254c0cbc92d
Hardware name: BCM2835
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x40/0x4c
dump_stack_lvl from ubsan_epilogue+0x8/0x34
ubsan_epilogue from __ubsan_handle_out_of_bounds+0x78/0x80
__ubsan_handle_out_of_bounds from sunxi_mc_smp_init+0xe4/0x4cc
sunxi_mc_smp_init from do_one_initcall+0xa0/0x2fc
do_one_initcall from kernel_init_freeable+0xf4/0x2f4
kernel_init_freeable from kernel_init+0x18/0x158
kernel_init from ret_from_fork+0x14/0x28
Since the enabled method couldn't match with any entry from
sunxi_mc_smp_data, the value of the index shouldn't be used right after
the loop. So move it after the check of ret in order to have a valid
index.
Fixes: 1631090e34f5 ("ARM: sun9i: smp: Add is_a83t field")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231228193903.9078-1-wahrenst@gmx.net
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is a HP ZBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED
and micmute LED work.
[ confirmed that the new entries are for new models that have no
proper name, so the strings are left as "HP" which will be updated
eventually later -- tiwai ]
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102024916.19093-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Similar to commit be809424659c ("selftests: bonding: do not set port down
before adding to bond"). The bond-arp-interval-causes-panic test failed
after commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing
it up") as the kernel will set the port down _after_ adding to bond if setting
port down specifically.
Fix it by removing the link down operation when adding to bond.
Fixes: 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we register a cn_proc listening event, the proc_event_num_listener
variable will be incremented by one, but if PROC_CN_MCAST_IGNORE is
not called, the count will not decrease.
This will cause the proc_*_connector function to take the wrong path.
It will reappear when the forkstat tool exits via ctrl + c.
We solve this problem by determining whether
there are still listeners to clear proc_event_num_listener.
Signed-off-by: wangkeqi <wangkeqiwang@didiglobal.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the @phy_timer: line to prevent the kernel-doc warning:
include/linux/phy.h:768: warning: Excess struct member 'phy_timer' description in 'phy_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. Setting the option is handled in
sk_setsockopt(), querying it was not handled in sk_getsockopt(), though.
Following remarks on an earlier submission of this patch, keep the old
behavior of getsockopt(SO_TIMESTAMPING_OLD) which returns the active
flags even if they actually have been set through SO_TIMESTAMPING_NEW.
The new getsockopt(SO_TIMESTAMPING_NEW) is stricter, returning flags
only if they have been set through the same option.
Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/lkml/20230703175048.151683-1-jthinz@mailbox.tu-berlin.de/
Link: https://lore.kernel.org/netdev/0d7cddc9-03fa-43db-a579-14f3e822615b@app.fastmail.com/
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal
Merge thermal control material for 6.8-rc1 from Daniel Lezcano:
"- Converted Mediatek Thermal to the json-schema (Rafał Miłecki)
- Fixed DT bindings issue on Loongson (Binbin Zhou)
- Fixed returning NULL instead of -ENODEV on Loogsoo (Binbin Zhou)
- Added the DT binding for the tsens on SM8650 platform (Neil Armstrong)
- Added a reboot on critical option feature (Fabio Estevam)
- Made usage of DEFINE_SIMPLE_DEV_PM_OPS on AmLogic (Uwe Kleine-König)
- Added the D1/T113s THS controller support on Sun8i (Maxim Kiselev)
- Fixed example in the DT binding for QCom SPMI (Johan Hovold)
- Fixed compilation warning for the tmon utility (Florian Eckert)
- Added interrupt based configuration on Exynos along with a set of
related cleanups (Mateusz Majewski)"
* tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
thermal/drivers/exynos: Use set_trips ops
thermal/drivers/exynos: Use BIT wherever possible
thermal/drivers/exynos: Split initialization of TMU and the thermal zone
thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
thermal/drivers/exynos: Simplify regulator (de)initialization
thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
thermal/drivers/exynos: Drop id field
thermal/drivers/exynos: Remove an unnecessary field description
tools/thermal/tmon: Fix compilation warning for wrong format
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
thermal/drivers/sun8i: Add D1/T113s THS controller support
dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
thermal: amlogic: Make amlogic_thermal_disable() return void
thermal/thermal_of: Allow rebooting after critical temp
reboot: Introduce thermal_zone_device_critical_reboot()
thermal/core: Prepare for introduction of thermal reboot
dt-bindings: thermal-zones: Document critical-action
...
|
|
The latest platforms use a different SMU message port(0x938) from the one
currently being used (0x538). Make code changes to adapt to this new
information.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
AMD newer platforms, (AMDI000A or family 1Ah series) also supports the STB
functionality. Add this to amd_pmc_is_stb_supported().
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Idlemask is an indication of each IP block current state (i.e. whether it
is running or idle) during s2idle transistion. The newer 1Ah family
supports this feature, add it to the support list.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In the current code, amd_pmc_get_ip_info() is being called from
amd_pmc_s2d_init() and that code block gets enabled only when the STB is
being enabled.
But the information from amd_pmc_get_ip_info() will be required outside of
STB usecase. Hence move this call into driver probe sequence.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Latest AMD SoCs has VPE (Video Processing Engine) IP block and the
statistics related to this IP can be obtained as a part of metrics table
information that the PMFW propogates. Add this support for 1Ah family
series.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-3-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To initiate the HW deep state transistion the OS_HINT command has to be
sent the PMFW. Add this support to the platforms that has AMDI000A
support.
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231228102104.1785383-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Return a status code without storing it in an intermediate variable.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/0d0c4876-37d7-4bee-912e-56324495454f@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
apmf_sbios_heartbeat_notify()
The kfree() function was called in one case by
the apmf_sbios_heartbeat_notify() function during error handling
even if the passed variable contained a null pointer.
This issue was detected by using the Coccinelle software.
* Thus return directly after a call of the function “apmf_if_call” failed
at the beginning.
* Delete the label “out” which became unnecessary with this refactoring.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/362ee824-fc53-4e19-9529-8b621657635b@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove the "private:" comment to prevent the kernel-doc warning:
include/linux/wmi.h:27: warning: Excess struct member 'setable' description in 'wmi_device'
Either a struct member is documented (via kernel-doc) or it's private,
but not both.
Fixes: b4cc979588ee ("platform/x86: wmi: Add kernel doc comments")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Armin Wolf <W_Armin@gmx.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231223194321.23084-1-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add missing extern for tgl_h_reg_map. Fixes sparse warning:
drivers/platform/x86/intel/pmc/tgl.c:213:26: warning: symbol 'tgl_h_reg_map' was not declared. Should it be static?
Fixes: 544f7b7f651c ("platform/x86/intel/pmc: Add regmap for Tiger Lake H PCH")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-9-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the GBE LTR ignore suspend time fix for Lunar Lake.
Fixes: 119652b855e6 ("platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-8-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the GBE LTR ignore suspend time fix for Arrow Lake.
Fixes: f34dcf397286 ("platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-7-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Merge the 'platform-drivers-x86-v6.7-6' fixes into pdx86/for-next
so that the "Intel PMC GBE LTR regression" fixes can also be
applied to the new Arrow Lake and Lunar Lake platform support
code in pdx86/for-next .
|
|
Pick up these commits from Linus's tree:
b106bcf0f99a ("locking/osq_lock: Clarify osq_wait_next()")
563adbfc351b ("locking/osq_lock: Clarify osq_wait_next() calling convention")
7c2230982129 ("locking/osq_lock: Move the definition of optimistic_spin_node into osq_lock.c")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, each trip point defined in the device tree corresponds to a
single hardware interrupt. This commit instead switches to using two
hardware interrupts, whose values are set dynamically using the
set_trips callback. Additionally, the critical temperature threshold is
handled specifically.
Setting interrupts in this way also fixes a long-standing lockdep
warning, which was caused by calling thermal_zone_get_trips with our
lock being held. Do note that this requires TMU initialization to be
split into two parts, as done by the parent commit: parts of the
initialization call into the thermal_zone_device structure and so must
be done after its registration, but the initialization is also
responsible for setting up calibration, which must be done before
thermal_zone_device registration, which will call set_trips for the
first time; if the calibration is not done in time, the interrupt values
will be silently wrong!
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-10-m.majewski2@samsung.com
|
|
The original driver did not use that macro and it allows us to make our
intentions slightly clearer.
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-9-m.majewski2@samsung.com
|
|
This will be needed in the future, as the thermal zone subsystem might
call our callbacks right after devm_thermal_of_zone_register. Currently
we just make get_temp return EAGAIN in such case, but this will not be
possible with state-modifying callbacks, for instance set_trips.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-8-m.majewski2@samsung.com
|
|
Exynos 4210 supports setting a base threshold value, which is added to
all trip points. This might be useful, but is not really necessary in
our usecase, so we always set it to 0 to simplify the code a bit.
Additionally, this change makes it so that we convert the value to the
calibrated one in a slightly different place. This is more correct
morally, though it does not make any change when single-point
calibration is being used (which is the case currently).
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-7-m.majewski2@samsung.com
|
|
We rewrite the initialization to enable the regulator as part of devm,
which allows us to not handle the struct instance manually.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link:
https://lore.kernel.org/r/20231201095625.301884-6-m.majewski2@samsung.com
|
|
correctly
Currently, if regulator is required in the SoC, but
devm_regulator_get_optional fails for whatever reason, the execution
will proceed without propagating the error. Meanwhile there is no
reason to output the error in case of -ENODEV.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-5-m.majewski2@samsung.com
|
|
threaded interrupts
The workqueue boilerplate is mostly one-to-one what the threaded
interrupts do.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-4-m.majewski2@samsung.com
|
|
We do not use the value, and only Exynos 7 defines this alias anyway.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-3-m.majewski2@samsung.com
|
|
It seems that the field has been removed in one of the previous commits,
but the description has been forgotten.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mateusz Majewski <m.majewski2@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231201095625.301884-2-m.majewski2@samsung.com
|
|
The following warnings are shown during compilation:
tui.c: In function 'show_cooling_device':
tui.c:216:40: warning: format '%d' expects argument of type 'int', but
argument 7 has type 'long unsigned int' [-Wformat=]
216 | "%02d %12.12s%6d %6d",
| ~~^
| |
| int
| %6ld
......
219 | ptdata.cdi[j].cur_state,
| ~~~~~~~~~~~~~~~~~~~~~~~
| |
| long unsigned int
tui.c:216:44: warning: format '%d' expects argument of type 'int', but
argument 8 has type 'long unsigned int' [-Wformat=]
216 | "%02d %12.12s%6d %6d",
| ~~^
| |
| int
| %6ld
......
220 | ptdata.cdi[j].max_state);
| ~~~~~~~~~~~~~~~~~~~~~~~
| |
| long unsigned int
To fix this, the correct string format must be used for printing.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231204141335.2798194-1-fe@dev.tdt.de
|
|
Clean up the examples by adding newline separators, moving 'reg'
properties after 'compatible' and dropping unused labels.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231130174114.13122-3-johan+linaro@kernel.org
|
|
The ADC Thermal Monitor is part of an SPMI PMIC, which in turn sits on
an SPMI bus.
Fixes: db03874b8543 ("dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor bindings")
Fixes: e8ffd6c0756b ("dt-bindings: thermal: qcom: add adc-thermal monitor bindings")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231130174114.13122-2-johan+linaro@kernel.org
|
|
This patch adds a thermal sensor controller support for the D1/T113s,
which is similar to the one on H6, but with only one sensor and
different scale and offset values.
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231217210629.131486-3-bigunclemax@gmail.com
|
|
Add a binding for D1/T113s thermal sensor controller.
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231217210629.131486-2-bigunclemax@gmail.com
|
|
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used, so the corresponding
__maybe_unused can be dropped.
Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231116112633.668826-3-u.kleine-koenig@pengutronix.de
|
|
amlogic_thermal_disable() returned zero unconditionally and
amlogic_thermal_remove() already ignores the return value.
Make it return no value and modify amlogic_thermal_suspend to not check
the value.
This patch introduces no semantic changes, but makes it more obvious for
a human reader that amlogic_thermal_suspend() cannot fail.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231116112633.668826-2-u.kleine-koenig@pengutronix.de
|
|
Currently, the default mechanism is to trigger a shutdown after the
critical temperature is reached.
In some embedded cases, such behavior does not suit well, as the board may
be unattended in the field and rebooting may be a better approach.
The bootloader may also check the temperature and only allow the boot to
proceed when the temperature is below a certain threshold.
Introduce support for allowing a reboot to be triggered after the
critical temperature is reached.
If the "critical-action" devicetree property is not found, fall back to
the shutdown action to preserve the existing default behavior.
If a custom ops->critical exists, then it takes preference over
critical-actions.
Tested on a i.MX8MM board with the following devicetree changes:
thermal-zones {
cpu-thermal {
critical-action = "reboot";
};
};
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-4-festevam@gmail.com
|
|
Introduce thermal_zone_device_critical_reboot() to trigger an
emergency reboot.
It is a counterpart of thermal_zone_device_critical() with the
difference that it will force a reboot instead of shutdown.
The motivation for doing this is to allow the thermal subystem
to trigger a reboot when the temperature reaches the critical
temperature.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-3-festevam@gmail.com
|
|
Add some helper functions to make it easier introducing the support
for thermal reboot.
No functional change.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-2-festevam@gmail.com
|
|
Document the critical-action property to describe the thermal action
the OS should perform after the critical temperature is reached.
The possible values are "shutdown" and "reboot".
The motivation for introducing the critical-action property is that
different systems may need different thermal actions when the critical
temperature is reached.
For example, in a desktop PC, it is desired that a shutdown happens
after the critical temperature is reached.
However, in some embedded cases, such behavior does not suit well,
as the board may be unattended in the field and rebooting may be a
better approach.
The bootloader may also benefit from this new property as it can check
the SoC temperature and in case the temperature is above the critical
point, it can trigger a shutdown or reboot accordingly.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231129124330.519423-1-festevam@gmail.com
|
|
Document the Temperature Sensor (TSENS) on the SM8650 Platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231128-topic-sm8650-upstream-bindings-tsens-v3-1-54179e6646d3@linaro.org
|
|
PTR_ERR() returns -ENODEV when thermal-zones are undefined, and we need
-ENODEV as the right value for comparison.
Otherwise, tz->type is NULL when thermal-zones is undefined, resulting
in the following error:
[ 12.290030] CPU 1 Unable to handle kernel paging request at virtual address fffffffffffffff1, era == 900000000355f410, ra == 90000000031579b8
[ 12.302877] Oops[#1]:
[ 12.305190] CPU: 1 PID: 181 Comm: systemd-udevd Not tainted 6.6.0-rc7+ #5385
[ 12.312304] pc 900000000355f410 ra 90000000031579b8 tp 90000001069e8000 sp 90000001069eba10
[ 12.320739] a0 0000000000000000 a1 fffffffffffffff1 a2 0000000000000014 a3 0000000000000001
[ 12.329173] a4 90000001069eb990 a5 0000000000000001 a6 0000000000001001 a7 900000010003431c
[ 12.337606] t0 fffffffffffffff1 t1 54567fd5da9b4fd4 t2 900000010614ec40 t3 00000000000dc901
[ 12.346041] t4 0000000000000000 t5 0000000000000004 t6 900000010614ee20 t7 900000000d00b790
[ 12.354472] t8 00000000000dc901 u0 54567fd5da9b4fd4 s9 900000000402ae10 s0 900000010614ec40
[ 12.362916] s1 90000000039fced0 s2 ffffffffffffffed s3 ffffffffffffffed s4 9000000003acc000
[ 12.362931] s5 0000000000000004 s6 fffffffffffff000 s7 0000000000000490 s8 90000001028b2ec8
[ 12.362938] ra: 90000000031579b8 thermal_add_hwmon_sysfs+0x258/0x300
[ 12.386411] ERA: 900000000355f410 strscpy+0xf0/0x160
[ 12.391626] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 12.397898] PRMD: 00000004 (PPLV0 +PIE -PWE)
[ 12.403678] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[ 12.409859] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
[ 12.415882] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 12.415907] BADV: fffffffffffffff1
[ 12.415911] PRID: 0014a000 (Loongson-64bit, Loongson-2K1000)
[ 12.415917] Modules linked in: loongson2_thermal(+) vfat fat uio_pdrv_genirq uio fuse zram zsmalloc
[ 12.415950] Process systemd-udevd (pid: 181, threadinfo=00000000358b9718, task=00000000ace72fe3)
[ 12.415961] Stack : 0000000000000dc0 54567fd5da9b4fd4 900000000402ae10 9000000002df9358
[ 12.415982] ffffffffffffffed 0000000000000004 9000000107a10aa8 90000001002a3410
[ 12.415999] ffffffffffffffed ffffffffffffffed 9000000107a11268 9000000003157ab0
[ 12.416016] 9000000107a10aa8 ffffff80020fc0c8 90000001002a3410 ffffffffffffffed
[ 12.416032] 0000000000000024 ffffff80020cc1e8 900000000402b2a0 9000000003acc000
[ 12.416048] 90000001002a3410 0000000000000000 ffffff80020f4030 90000001002a3410
[ 12.416065] 0000000000000000 9000000002df6808 90000001002a3410 0000000000000000
[ 12.416081] ffffff80020f4030 0000000000000000 90000001002a3410 9000000002df2ba8
[ 12.416097] 00000000000000b4 90000001002a34f4 90000001002a3410 0000000000000002
[ 12.416114] ffffff80020f4030 fffffffffffffff0 90000001002a3410 9000000002df2f30
[ 12.416131] ...
[ 12.416138] Call Trace:
[ 12.416142] [<900000000355f410>] strscpy+0xf0/0x160
[ 12.416167] [<90000000031579b8>] thermal_add_hwmon_sysfs+0x258/0x300
[ 12.416183] [<9000000003157ab0>] devm_thermal_add_hwmon_sysfs+0x50/0xe0
[ 12.416200] [<ffffff80020cc1e8>] loongson2_thermal_probe+0x128/0x200 [loongson2_thermal]
[ 12.416232] [<9000000002df6808>] platform_probe+0x68/0x140
[ 12.416249] [<9000000002df2ba8>] really_probe+0xc8/0x3c0
[ 12.416269] [<9000000002df2f30>] __driver_probe_device+0x90/0x180
[ 12.416286] [<9000000002df3058>] driver_probe_device+0x38/0x160
[ 12.416302] [<9000000002df33a8>] __driver_attach+0xa8/0x200
[ 12.416314] [<9000000002deffec>] bus_for_each_dev+0x8c/0x120
[ 12.416330] [<9000000002df198c>] bus_add_driver+0x10c/0x2a0
[ 12.416346] [<9000000002df46b4>] driver_register+0x74/0x160
[ 12.416358] [<90000000022201a4>] do_one_initcall+0x84/0x220
[ 12.416372] [<90000000022f3ab8>] do_init_module+0x58/0x2c0
[ 12.416386] [<90000000022f6538>] init_module_from_file+0x98/0x100
[ 12.416399] [<90000000022f67f0>] sys_finit_module+0x230/0x3c0
[ 12.416412] [<900000000358f7c8>] do_syscall+0x88/0xc0
[ 12.416431] [<900000000222137c>] handle_syscall+0xbc/0x158
Fixes: e7e3a7c35791 ("thermal/drivers/loongson-2: Add thermal management support")
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/343c14de98216636a47b43e8bfd47b70d0a8e068.1700817227.git.zhoubinbin@loongson.cn
|
|
Add the missing 'thermal-sensor-cells' property which is required for
every thermal sensor as it's used when using phandles.
And add the thermal-sensor.yaml reference.
In fact, it was a careless mistake when submitting the driver that
caused it to not work properly. So the fix is necessary, although it
will result in the ABI break.
Fixes: 72684d99a854 ("thermal: dt-bindings: add loongson-2 thermal")
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/6d69362632271ab0af9a5fbfa3bc46a0894f1d54.1700817227.git.zhoubinbin@loongson.cn
|
|
This helps validating DTS files. Introduced changes:
1. Improved title
2. Simplified description (dropped "This describes the device tree...")
3. Dropped undocumented "reset-names" from example
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231117052214.24554-1-zajec5@gmail.com
|
|
When a 'DEL_CLIENT' message is received from the remote, the corresponding
server port gets deleted. A DEL_SERVER message is then announced for this
server. As part of handling the subsequent DEL_SERVER message, the name-
server attempts to delete the server port which results in a '-ENOENT' error.
The return value from server_del() is then propagated back to qrtr_ns_worker,
causing excessive error prints.
To address this, return 0 from control_cmd_del_server() without checking the
return value of server_del(), since the above scenario is not an error case
and hence server_del() doesn't have any other error return value.
Signed-off-by: Sarannya Sasikumar <quic_sarannya@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add checks to all the VFS paths for "are we in a RO snapshot?".
Note - we don't check this when setting inode options via our xattr
interface, since those generally only affect data placement, not
contents of data.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: "Carl E. Thompson" <list-bcachefs@carlthompson.net>
|
|
Add a new superblock section that contains a list of
{ minor version, recovery passes, errors_to_fix }
that is - a list of recovery passes that must be run when downgrading
past a given version, and a list of errors to silently fix.
The upcoming disk accounting rewrite is not going to be fully
compatible: we're going to have to regenerate accounting both when
upgrading to the new version, and also from downgrading from the new
version, since the new method of doing disk space accounting is a
completely different architecture based on deltas, and synchronizing
them for every jounal entry write to maintain compatibility is going to
be too expensive and impractical.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add two new superblock fields. Since the main section of the superblock
is now fully, we have to add a new variable length section for them -
bch_sb_field_ext.
- recovery_passes_requried: recovery passes that must be run on the
next mount
- errors_silent: errors that will be silently fixed
These are to improve upgrading and dwongrading: these fields won't be
cleared until after recovery successfully completes, so there won't be
any issues with crashing partway through an upgrade or a downgrade.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
