| Age | Commit message (Collapse) | Author |
|---|
|
Advertise WIPHY_FLAG_4ADDR_STATION capability to wireless core. Send
use4addr interface change flag to firmware in change_virtual_intf
cfg80211 callback.
In order to enable adding wireless station interface to bridge
one should turn on 4addr mode using the following command:
$ iw dev wlan0 set 4addr on
$ brctl addif br0 wlan0
If this commands succeeds, then interface can be added to bridge.
Note that when wireless interface is added to bridge, wpa_supplicant
should be started with appropriate -b <brname> parameter, e.g:
$ wpa_supplicant -Dnl80211 -iwlan0 -c/path/to/wpa.conf -b br0
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
In the current implementation INTx interrupt is deasserted after the
control path processing. However this may lead to missed interrupts
from the wireless card. For instance, this may happen as a result
of control path activity, when another interrupt arrives before
INTx is deasserted.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Add support of EBUSY error code for remote procedures over QLINK protocol.
Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
This patch adds support for 8977 chipset to mwifiex with SDIO
interface. Register offsets and supported feature flags are
updated. Firmware image used will be mrvl/sd8977_uapsta.bin.
Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
Signed-off-by: Rakesh Parmar <rakeshp@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
This patch moves the clearing of rtlpriv->link_info.num_rx_inperiod in
rtl_watchdog_wq_callback a few lines down.
This is necessary since it is still used in the "AP off" detection
code block. Moved clearing of rtlpriv->link_info.num_rx_inperiod
as well for consistency.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
This re-introduces the function rtl8723e_dm_refresh_rate_adaptive_mask.
This function was present in a previous version of the code base,
it works just fine for me -- as long as it is not using stale data.
Unlike the original version of this function it avoids using
dm.undec_sm_pwdb when no beacon was received.
Fixed a style nit in rtl8723e_dm_init_rate_adaptive_mask.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
When no beacon was received, the value in dm.undec_sm_pwdb is most
likely out of date and should not be used to adjust the input path.
Assume instead that the signal level is low.
Fix the state machine in rtl8723e_dm_cck_packet_detection_thresh
which did not clear pre_cck_fa_state when changing cur_cck_pd_state
from CCK_PD_STAGE_LOWRSSI/CCK_FA_STAGE_LOW to CCK_PD_STAGE_HIGHRSSI
and back again to CCK_PD_STAGE_LOWRSSI/CCK_FA_STAGE_LOW, the register
RCCK0_CCA not written to 0x83 on the second change.
Explicitly initialize pre_cck_fa_state/cur_cck_fa_state in
rtl_dm_diginit.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
This appears to trigger a firmware bug and causes severe
problems with rtl8723ae PCI devices.
When the power save mode is activated for longer periods
of time the firmware stops to receive any packets.
This problem was exposed by commit 873ffe154ae0 ("rtlwifi:
Fix logic error in enter/exit power-save mode").
Previously the power save mode was only active rarely and
only for a short time so that the problem was not noticeable.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
sysfs_create_group() could fail. The fix checkes its return values
and issue error messages if it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Current implementation of RT6352 support provides too high tx power
at least on iPA/eLNA devices. Reduce amplification of variable gain
amplifier by 6dB to match board target power of 17dBm.
Transmited signal strength with this patch is similar to that of
stock firmware or pandorabox firmware. Throughput measured with iperf
improves. Device tested: Xiaomi Miwifi Mini.
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Fix the missing and malformed documentation that kernel-doc and
sphinx warn about. While at it, also add some things to the docs
to fix missing links.
Sadly, the only way I could find to fix this was to add some
trailing whitespace.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the missing documentation that kernel-doc continually warns
about, to get rid of all that noise.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the current code, the codec registration may happen both at the
codec bind time and the end of the controller probe time. In a rare
occasion, they race with each other, leading to Oops due to the still
uninitialized card device.
This patch introduces a simple flag to prevent the codec registration
at the codec bind time as long as the controller probe is going on.
The controller probe invokes snd_card_register() that does the whole
registration task, and we don't need to register each piece
beforehand.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Replace the open-codes in many places with a new common helper for
performing the same thing: referring to the primary headphone pin.
This eventually fixes the potentially missing headphone pin on some
weird devices, too.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When auto_mute = no or spec->suppress_auto_mute = 1, cfg->hp_pins will
lose value.
Add this patch to find hp_pins value.
I add fixed for ALC282 ALC225 ALC256 ALC294 and alc_default_init()
alc_default_shutup().
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Since we now prevent regulatory restore during STA disconnect
if concurrent AP interfaces are active, we need to reschedule
this check when the AP state changes. This fixes never doing
a restore when an AP is the last interface to stop. Or to put
it another way: we need to re-check after anything we check
here changes.
Cc: stable@vger.kernel.org
Fixes: 113f3aaa81bd ("cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some drivers use IEEE80211_KEY_FLAG_SW_MGMT_TX to indicate that management
frames need to be software encrypted. Since normal data packets are still
encrypted by the hardware, crypto_tx_tailroom_needed_cnt gets decremented
after key upload to hw. This can lead to passing skbs to ccmp_encrypt_skb,
which don't have the necessary tailroom for software encryption.
Change the code to add tailroom for encrypted management packets, even if
crypto_tx_tailroom_needed_cnt is 0.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In typical cases, there's no need to pass both the maxattr
and the policy array pointer, as the maxattr should just be
ARRAY_SIZE(policy) - 1. Therefore, to be less error prone,
just remove the maxattr argument from the default macros
and deduce the size accordingly.
Leave the original macros with a leading underscore to use
here and in case somebody needs to pass a policy pointer
where the policy isn't declared in the same place and thus
ARRAY_SIZE() cannot be used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
* acpi-misc:
platform/x86: Fix unmet dependency warning for SAMSUNG_Q10
platform/x86: Fix unmet dependency warning for ACPI_CMPC
|
|
Merge net-next so that we get the changes from net, which would
otherwise conflict with the NLA_POLICY_NESTED/_ARRAY changes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
* pm-cpuidle-fixes:
cpuidle: poll_state: Fix default time limit
|
|
Fix spelling mistake in cfg80211.h: "lenght" -> "length".
The typo is also in the special comment block which
translates to documentation.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There was a typo in the documentation for weight_multiplier in mac80211.h,
and the doc was missing entirely for airtime and airtime_weight in sta_info.h.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 2b6f0090a333 ("mtd: Check add_mtd_device() ret code") contained
a leftover of the debug session that led to this bug fix. Remove this
pr_info().
Fixes: 2b6f0090a333 ("mtd: Check add_mtd_device() ret code")
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Mostly driver fixes, but there's a core framework fix in here too:
- Revert the commits that introduce clk management for the SP clk on
MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and
there isn't any need to manage this clk, it just causes more
headaches.
- A performance regression that went unnoticed for many years where
we would traverse the entire clk tree looking for a clk by name
when we already have the pointer to said clk that we're looking for
- A parent linkage fix for the qcom SDM845 clk driver
- An i.MX clk driver rate miscalculation fix where order of
operations were messed up
- One error handling fix from the static checkers"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc: Use active only source for CPUSS clocks
clk: ti: Fix error handling in ti_clk_parse_divider_data()
clk: imx: Fix fractional clock set rate computation
clk: Remove global clk traversal on fetch parent index
Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock"
Revert "clk: mmp2: add SP clock"
Revert "Input: olpc_apsp - enable the SP clock"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a bug in cavium/nitrox where the callback is invoked prior
to the DMA unmap"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: cavium/nitrox - Invoke callback after DMA unmap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Revert armada8k GPIO reset change that broke Macchiatobin booting
(Baruch Siach)
- Use actual size config reads on ARM cns3xxx (Koen Vandeputte)
- Fix ARM cns3xxx config write alignment issue (Koen Vandeputte)
- Fix imx6 PHY device link error checking (Leonard Crestez)
- Fix imx6 probe failure on chips without separate PCI power domain
(Leonard Crestez)
* tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: armada8k: Add support for gpio controlled reset signal"
ARM: cns3xxx: Use actual size reads for PCIe
ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment
PCI: imx: Fix checking pd_pcie_phy device link addition
PCI: imx: Fix probe failure without power domain
|
|
On ppc64le, When a string with PAGE_SIZE - 1 (i.e. 64k-1) length is
passed as a "filesystem type" argument to the mount(2) syscall,
copy_mount_string() ends up allocating 64k (the PAGE_SIZE on ppc64le)
worth of space for holding the string in kernel's address space.
Later, in set_precision() (invoked by get_fs_type() ->
__request_module() -> vsnprintf()), we end up assigning
strlen(fs-type-string) i.e. 65535 as the
value to 'struct printf_spec'->precision member. This field has a width
of 16 bits and it is a signed data type. Hence an invalid value ends
up getting assigned. This causes the "WARN_ONCE(spec->precision != prec,
"precision %d too large", prec)" statement inside set_precision() to be
executed.
This commit fixes the bug by limiting the length of the string passed by
copy_mount_string() to strndup_user() to PATH_MAX.
Signed-off-by: Chandan Rajendra <chandan@linux.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.ibm.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The arm64 CRC-T10DIF implementation either uses 8-bit or 64-bit
polynomial multiplication instructions, since the latter are
faster but not mandatory in the architecture.
Since that prevents us from testing both implementations on the
same system, let's expose both implementations to the crypto API,
with the priorities reflecting that the P64 version is the
preferred one if available.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove some code that is no longer called now that we make sure never
to invoke the SIMD routine with less than 16 bytes of input.
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove some code that is no longer called now that we make sure never
to invoke the SIMD routine with less that 16 bytes of input.
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The SIMD routine ported from x86 used to have a special code path
for inputs < 16 bytes, which got lost somewhere along the way.
Instead, the current glue code aligns the input pointer to 16 bytes,
which is not really necessary on this architecture (although it
could be beneficial to performance to expose aligned data to the
the NEON routine), but this could result in inputs of less than
16 bytes to be passed in. This not only fails the new extended
tests that Eric has implemented, it also results in the code
reading past the end of the input, which could potentially result
in crashes when dealing with less than 16 bytes of input at the
end of a page which is followed by an unmapped page.
So update the glue code to only invoke the NEON routine if the
input is at least 16 bytes.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 6ef5737f3931 ("crypto: arm64/crct10dif - port x86 SSE implementation to arm64")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The SIMD routine ported from x86 used to have a special code path
for inputs < 16 bytes, which got lost somewhere along the way.
Instead, the current glue code aligns the input pointer to permit
the NEON routine to use special versions of the vld1 instructions
that assume 16 byte alignment, but this could result in inputs of
less than 16 bytes to be passed in. This not only fails the new
extended tests that Eric has implemented, it also results in the
code reading past the end of the input, which could potentially
result in crashes when dealing with less than 16 bytes of input
at the end of a page which is followed by an unmapped page.
So update the glue code to only invoke the NEON routine if the
input is at least 16 bytes.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 1d481f1cd892 ("crypto: arm/crct10dif - port x86 SSE implementation to ARM")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Roland reports the following issue and provides a root cause analysis:
"On a v4.19 i.MX6 system with IMA and CONFIG_DMA_API_DEBUG enabled, a
warning is generated when accessing files on a filesystem for which IMA
measurement is enabled:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:1181 check_for_stack.part.9+0xd0/0x120
caam_jr 2101000.jr0: DMA-API: device driver maps memory from stack [addr=b668049e]
Modules linked in:
CPU: 0 PID: 1 Comm: switch_root Not tainted 4.19.0-20181214-1 #2
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<c010efb8>] (dump_backtrace) from [<c010f2d0>] (show_stack+0x20/0x24)
[<c010f2b0>] (show_stack) from [<c08b04f4>] (dump_stack+0xa0/0xcc)
[<c08b0454>] (dump_stack) from [<c012b610>] (__warn+0xf0/0x108)
[<c012b520>] (__warn) from [<c012b680>] (warn_slowpath_fmt+0x58/0x74)
[<c012b62c>] (warn_slowpath_fmt) from [<c0199acc>] (check_for_stack.part.9+0xd0/0x120)
[<c01999fc>] (check_for_stack.part.9) from [<c019a040>] (debug_dma_map_page+0x144/0x174)
[<c0199efc>] (debug_dma_map_page) from [<c065f7f4>] (ahash_final_ctx+0x5b4/0xcf0)
[<c065f240>] (ahash_final_ctx) from [<c065b3c4>] (ahash_final+0x1c/0x20)
[<c065b3a8>] (ahash_final) from [<c03fe278>] (crypto_ahash_op+0x38/0x80)
[<c03fe240>] (crypto_ahash_op) from [<c03fe2e0>] (crypto_ahash_final+0x20/0x24)
[<c03fe2c0>] (crypto_ahash_final) from [<c03f19a8>] (ima_calc_file_hash+0x29c/0xa40)
[<c03f170c>] (ima_calc_file_hash) from [<c03f2b24>] (ima_collect_measurement+0x1dc/0x240)
[<c03f2948>] (ima_collect_measurement) from [<c03f0a60>] (process_measurement+0x4c4/0x6b8)
[<c03f059c>] (process_measurement) from [<c03f0cdc>] (ima_file_check+0x88/0xa4)
[<c03f0c54>] (ima_file_check) from [<c02d8adc>] (path_openat+0x5d8/0x1364)
[<c02d8504>] (path_openat) from [<c02dad24>] (do_filp_open+0x84/0xf0)
[<c02daca0>] (do_filp_open) from [<c02cf50c>] (do_open_execat+0x84/0x1b0)
[<c02cf488>] (do_open_execat) from [<c02d1058>] (__do_execve_file+0x43c/0x890)
[<c02d0c1c>] (__do_execve_file) from [<c02d1770>] (sys_execve+0x44/0x4c)
[<c02d172c>] (sys_execve) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
---[ end trace 3455789a10e3aefd ]---
The cause is that the struct ahash_request *req is created as a
stack-local variable up in the stack (presumably somewhere in the IMA
implementation), then passed down into the CAAM driver, which tries to
dma_single_map the req->result (indirectly via map_seq_out_ptr_result)
in order to make that buffer available for the CAAM to store the result
of the following hash operation.
The calling code doesn't know how req will be used by the CAAM driver,
and there could be other such occurrences where stack memory is passed
down to the CAAM driver. Therefore we should rather fix this issue in
the CAAM driver where the requirements are known."
Fix this problem by:
-instructing the crypto engine to write the final hash in state->caam_ctx
-subsequently memcpy-ing the final hash into req->result
Cc: <stable@vger.kernel.org> # v4.19+
Reported-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The arm64 GHASH implementation either uses 8-bit or 64-bit
polynomial multiplication instructions, since the latter are
faster but not mandatory in the architecture.
Since that prevents us from testing both implementations on the
same system, let's expose both implementations to the crypto API,
with the priorities reflecting that the P64 version is the
preferred one if available.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CRC32 is not a cryptographic hash algorithm,
so the FIPS restrictions should not apply to it.
(The CRC32C variant is already allowed.)
This CRC32 variant is used for in dm-crypt legacy TrueCrypt
IV implementation (tcw); detected by cryptsetup test suite
failure in FIPS mode.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The header search path -I. in kernel Makefiles is very suspicious;
it allows the compiler to search for headers in the top of $(srctree),
where obviously no header file exists.
'git grep BCMDRIVER' has no hit. So, this macro is not referenced.
I was able to build this driver without the extra compiler options.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, the Kbuild core manipulates header search paths in a crazy
way [1].
To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.
Having whitespaces after -I does not matter since commit 48f6e3cf5bc6
("kbuild: do not drop -I without parameter").
[1]: https://patchwork.kernel.org/patch/9632347/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the AES-CCM code was first added, the NEON register were saved
and restored eagerly, and so the code avoided doing so, and executed
the scatterwalk in atomic context inside the kernel_neon_begin/end
section.
This has been changed in the meantime, so switch to non-atomic
scatterwalks.
Fixes: bd2ad885e30d ("crypto: arm64/aes-ce-ccm - move kernel mode neon ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 5092fcf34908 ("crypto: arm64/aes-ce-ccm: add non-SIMD generic
fallback") introduced C fallback code to replace the NEON routines
when invoked from a context where the NEON is not available (i.e.,
from the context of a softirq taken while the NEON is already being
used in kernel process context)
Fix two logical flaws in the MAC calculation of the associated data.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 5092fcf34908 ("crypto: arm64/aes-ce-ccm: add non-SIMD generic fallback")
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The NEON MAC calculation routine fails to handle the case correctly
where there is some data in the buffer, and the input fills it up
exactly. In this case, we enter the loop at the end with w8 == 0,
while a negative value is assumed, and so the loop carries on until
the increment of the 32-bit counter wraps around, which is quite
obviously wrong.
So omit the loop altogether in this case, and exit right away.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: a3fd82105b9d1 ("arm64/crypto: AES in CCM mode using ARMv8 Crypto ...")
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instantiating "cryptd(crc32c)" causes a crypto self-test failure because
the crypto_alloc_shash() in alg_test_crc32c() fails. This is because
cryptd(crc32c) is an ahash algorithm, not a shash algorithm; so it can
only be accessed through the ahash API, unlike shash algorithms which
can be accessed through both the ahash and shash APIs.
As the test is testing the shash descriptor format which is only
applicable to shash algorithms, skip it for ahash algorithms.
(Note that it's still important to fix crypto self-test failures even
for weird algorithm instantiations like cryptd(crc32c) that no one
would really use; in fips_enabled mode unprivileged users can use them
to panic the kernel, and also they prevent treating a crypto self-test
failure as a bug when fuzzing the kernel.)
Fixes: 8e3ee85e68c5 ("crypto: crc32c - Test descriptor context format")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The request unmap and bounce buffer copying is currently unnecessarily
done while holding the queue spin lock.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Vincent Whitchurch <rabinv@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid plain memcmp() on the AEAD tag value as this could leak
information through a timing side channel.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The implementation assumed that the client always wants the whole 16
byte AES-GCM tag. Now we respect the requested authentication tag size
fetched using crypto_aead_authsize().
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The driver was optimized to only do cache maintenance for the last
word of the dma descriptor status array. Unfortunately an omission
also passed the last word as the address of the array start to the DMA
engine. In most cases this goes unnoticed since the hardware aligns
the address to a 64 byte boundary.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Clients may submit a new requests from the completion callback
context. The driver was not prepared to receive a request in this
state because it already held the request queue lock and a recursive
lock error is triggered.
Now all completions are queued up until we are ready to drop the queue
lock and then delivered.
The fault was triggered by TCP over an IPsec connection in the LTP
test suite:
LTP: starting tcp4_ipsec02 (tcp_ipsec.sh -p ah -m transport -s "100 1000 65535")
BUG: spinlock recursion on CPU#1, genload/943
lock: 0xbf3c3094, .magic: dead4ead, .owner: genload/943, .owner_cpu: 1
CPU: 1 PID: 943 Comm: genload Tainted: G O 4.9.62-axis5-devel #6
Hardware name: Axis ARTPEC-6 Platform
(unwind_backtrace) from [<8010d134>] (show_stack+0x18/0x1c)
(show_stack) from [<803a289c>] (dump_stack+0x84/0x98)
(dump_stack) from [<8016e164>] (do_raw_spin_lock+0x124/0x128)
(do_raw_spin_lock) from [<804de1a4>] (artpec6_crypto_submit+0x2c/0xa0)
(artpec6_crypto_submit) from [<804def38>] (artpec6_crypto_prepare_submit_hash+0xd0/0x54c)
(artpec6_crypto_prepare_submit_hash) from [<7f3165f0>] (ah_output+0x2a4/0x3dc [ah4])
(ah_output [ah4]) from [<805df9bc>] (xfrm_output_resume+0x178/0x4a4)
(xfrm_output_resume) from [<805d283c>] (xfrm4_output+0xac/0xbc)
(xfrm4_output) from [<80587928>] (ip_queue_xmit+0x140/0x3b4)
(ip_queue_xmit) from [<805a13b4>] (tcp_transmit_skb+0x4c4/0x95c)
(tcp_transmit_skb) from [<8059f218>] (tcp_rcv_state_process+0xdf4/0xdfc)
(tcp_rcv_state_process) from [<805a7530>] (tcp_v4_do_rcv+0x64/0x1ac)
(tcp_v4_do_rcv) from [<805a9724>] (tcp_v4_rcv+0xa34/0xb74)
(tcp_v4_rcv) from [<80581d34>] (ip_local_deliver_finish+0x78/0x2b0)
(ip_local_deliver_finish) from [<8058259c>] (ip_local_deliver+0xe4/0x104)
(ip_local_deliver) from [<805d23ec>] (xfrm4_transport_finish+0xf4/0x144)
(xfrm4_transport_finish) from [<805df564>] (xfrm_input+0x4f4/0x74c)
(xfrm_input) from [<804de420>] (artpec6_crypto_task+0x208/0x38c)
(artpec6_crypto_task) from [<801271b0>] (tasklet_action+0x60/0xec)
(tasklet_action) from [<801266d4>] (__do_softirq+0xcc/0x3a4)
(__do_softirq) from [<80126d20>] (irq_exit+0xf4/0x15c)
(irq_exit) from [<801741e8>] (__handle_domain_irq+0x68/0xbc)
(__handle_domain_irq) from [<801014f0>] (gic_handle_irq+0x50/0x94)
(gic_handle_irq) from [<80657370>] (__irq_usr+0x50/0x80)
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The hardware cannot restore the context correctly when it operates in
SHA512 mode. This is too restrictive when operating in a framework that
can interleave multiple hash sessions.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The hardware implementation of SHA384 was not correct and it cannot
be used in any situation.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
