summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-22qed: Add infrastructure for error detection and recoveryTomer Tayar
This patch adds the detection and handling of a parity error ("process kill event"), including the update of the protocol drivers, and the prevention of any HW access that will lead to device access towards the host while recovery is in progress. It also provides the means for the protocol drivers to trigger a recovery process on their decision. Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22qed: Revise load sequence to avoid PCI errorsTomer Tayar
Initiating final cleanup after an ungraceful driver unload can lead to bad PCI accesses towards the host. This patch revises the load sequence so final cleanup is sent while the internal master enable is cleared, to prevent the host accesses, and clears the internal error indications just before enabling the internal master enable. Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net/ipv6: don't return positive numbers when nothing was dumpedJakub Kicinski
in6_dump_addrs() returns a positive 1 if there was nothing to dump. This return value can not be passed as return from inet6_dump_addr() as is, because it will confuse rtnetlink, resulting in NLMSG_DONE never getting set: $ ip addr list dev lo EOF on netlink Dump terminated v2: flip condition to avoid a new goto (DaveA) Fixes: 7c1e8a3817c5 ("netlink: fixup regression in RTM_GETADDR") Reported-by: Brendan Galloway <brendan.galloway@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "This is a sort of random collection of clk fixes that have come in since the merge window: - Handful of memory allocation and potentially bad pointer usage fixes - JSON format was incorrect for clk_dump because it missed a comma - Two Kconfig fixes, one duplicate and one missing select line - Compiler warning fix for the VC5 clk driver - Name and rate fixes for PLLs in the stratix10 driver so it can properly detect PLL rates and parents" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: socfpga: stratix10: fix naming convention for the fixed-clocks clk: socfpga: stratix10: fix rate calculation for pll clocks clk: qcom: Select QCOM_GDSC with MSM_GCC_8998 clk: vc5: Abort clock configuration without upstream clock clk: sysfs: fix invalid JSON in clk_dump clk: imx: Remove Kconfig duplicate include clk: zynqmp: Fix memory allocation in zynqmp_clk_setup clk: tegra: dfll: Fix a potential Oop in remove() clk: imx: fix potential NULL dereference in imx8qxp_lpcg_clk_probe()
2019-01-23Merge tag 'linux-kselftest-5.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Fixes to rtc, seccomp and other tests" * tag 'linux-kselftest-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/seccomp: Abort without user notification support selftests: gpio-mockup-chardev: Check asprintf() for error selftests: seccomp: use LDLIBS instead of LDFLAGS selftests/vm/gup_benchmark.c: match gup struct to kernel tools/testing/selftests/x86/unwind_vdso.c: Remove duplicate header x86/mpx/selftests: fix spelling mistake "succeded" -> "succeeded" selftests: rtc: rtctest: add alarm test on minute boundary selftests: rtc: rtctest: fix alarm tests
2019-01-22writeback: synchronize sync(2) against cgroup writeback membership switchesTejun Heo
sync_inodes_sb() can race against cgwb (cgroup writeback) membership switches and fail to writeback some inodes. For example, if an inode switches to another wb while sync_inodes_sb() is in progress, the new wb might not be visible to bdi_split_work_to_wbs() at all or the inode might jump from a wb which hasn't issued writebacks yet to one which already has. This patch adds backing_dev_info->wb_switch_rwsem to synchronize cgwb switch path against sync_inodes_sb() so that sync_inodes_sb() is guaranteed to see all the target wbs and inodes can't jump wbs to escape syncing. v2: Fixed misplaced rwsem init. Spotted by Jiufei. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jiufei Xue <xuejiufei@gmail.com> Link: http://lkml.kernel.org/r/dc694ae2-f07f-61e1-7097-7c8411cee12d@gmail.com Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-22net: ip_gre: use erspan key field for tunnel lookupLorenzo Bianconi
Use ERSPAN key header field as tunnel key in gre_parse_header routine since ERSPAN protocol sets the key field of the external GRE header to 0 resulting in a tunnel lookup fail in ip6gre_err. In addition remove key field parsing and pskb_may_pull check in erspan_rcv and ip6erspan_rcv Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: sun: cassini: Cleanup license conflictThomas Gleixner
The recent addition of SPDX license identifiers to the files in drivers/net/ethernet/sun created a licensing conflict. The cassini driver files contain a proper license notice: * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. but the SPDX change added: SPDX-License-Identifier: GPL-2.0 So the file got tagged GPL v2 only while in fact it is licensed under GPL v2 or later. It's nice that people care about the SPDX tags, but they need to be more careful about it. Not everything under (the) sun belongs to ... Fix up the SPDX identifier and remove the boiler plate text as it is redundant. Fixes: c861ef83d771 ("sun: Add SPDX license tags to Sun network drivers") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Shannon Nelson <shannon.nelson@oracle.com> Cc: Zhu Yanjun <yanjun.zhu@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22dm: add missing trace_block_split() to __split_and_process_bio()Mike Snitzer
Provides useful context about bio splits in blktrace. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-22dm: fix dm_wq_work() to only use __split_and_process_bio() if appropriateMike Snitzer
Otherwise targets that don't support/expect IO splitting could resubmit bios using code paths with unnecessary IO splitting complexity. Depends-on: 24113d487843 ("dm: avoid indirect call in __dm_make_request") Fixes: 978e51ba38e00 ("dm: optimize bio-based NVMe IO submission") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - descriptor parsing regression fix for devices that have more than 16 collections, from Peter Hutterer (and followup cleanup from Philipp Zabel) - quirk for Goodix touchpad * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: core: simplify active collection tracking HID: i2c-hid: Disable runtime PM on Goodix touchpad HID: core: replace the collection tree pointers with indices
2019-01-22vfio/pci: Cleanup license messThomas Gleixner
The recently added nvlink2 VFIO driver introduced a license conflict in two files. In both cases the SPDX license identifier is: SPDX-License-Identifier: GPL-2.0+ but the files contain also the following license boiler plate text: * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation The latter is GPL-2.9-only and not GPL-2.0=. Looking deeper. The nvlink source file is derived from vfio_pci_igd.c which is also licensed under GPL-2.0-only and it can be assumed that the file was copied and modified. As the original file is licensed GPL-2.0-only it's not possible to relicense derivative work to GPL-2.0-or-later. Fix the SPDX identifier and remove the boiler plate as it is redundant. Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: kvm@vger.kernel.org Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-01-22block: cover another queue enter recursion via BIO_QUEUE_ENTEREDMing Lei
Except for blk_queue_split(), bio_split() is used for splitting bio too, then the remained bio is often resubmit to queue via generic_make_request(). So the same queue enter recursion exits in this case too. Unfortunatley commit cd4a4ae4683dc2 doesn't help this case. This patch covers the above case by setting BIO_QUEUE_ENTERED before calling q->make_request_fn. In theory the per-bio flag is used to simulate one stack variable, it is just fine to clear it after q->make_request_fn is returned. Especially the same bio can't be submitted from another context. Fixes: cd4a4ae4683dc2 ("block: don't use blocking queue entered for recursive bio submits") Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: NeilBrown <neilb@suse.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-22direct-io: allow direct writes to empty inodesErnesto A. Fernández
On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently not allowed to create blocks for an empty inode. This confusion comes from trying to bit shift a negative number, so check the size of the inode first. The problem is most visible for hfsplus, because the fallback to buffered I/O doesn't happen and the write fails with EIO. This is in part the fault of the module, because it gives a wrong return value on ->get_block(); that will be fixed in a separate patch. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-22i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'Christophe JAILLET
Fix a cut'n'paste typo. Checking 'master->sysclk' is expected here. Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: switch from d_add() to d_instantiate()Christian Brauner
In a previous commit we switched from a d_alloc_name() + d_lookup() combination to setup a new dentry and find potential duplicates to the more idiomatic lookup_one_len(). As far as I understand, this also means we need to switch from d_add() to d_instantiate() since lookup_one_len() will create a new dentry when it doesn't find an existing one and add the new dentry to the hash queues. So we only need to call d_instantiate() to connect the dentry to the inode and turn it into a positive dentry. If we were to use d_add() we sure see stack traces like the following indicating that adding the same dentry twice over the same inode: [ 744.441889] CPU: 4 PID: 2849 Comm: landscape-sysin Not tainted 5.0.0-rc1-brauner-binderfs #243 [ 744.441889] Hardware name: Dell DCS XS24-SC2 /XS24-SC2 , BIOS S59_3C20 04/07/2011 [ 744.441889] RIP: 0010:__d_lookup_rcu+0x76/0x190 [ 744.441889] Code: 89 75 c0 49 c1 e9 20 49 89 fd 45 89 ce 41 83 e6 07 42 8d 04 f5 00 00 00 00 89 45 c8 eb 0c 48 8b 1b 48 85 db 0f 84 81 00 00 00 <44> 8b 63 fc 4c 3b 6b 10 75 ea 48 83 7b 08 00 74 e3 41 83 e4 fe 41 [ 744.441889] RSP: 0018:ffffb8c984e27ad0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 744.441889] RAX: 0000000000000038 RBX: ffff9407ef770c08 RCX: ffffb8c980011000 [ 744.441889] RDX: ffffb8c984e27b54 RSI: ffffb8c984e27ce0 RDI: ffff9407e6689600 [ 744.441889] RBP: ffffb8c984e27b28 R08: ffffb8c984e27ba4 R09: 0000000000000007 [ 744.441889] R10: ffff9407e5c4f05c R11: 973f3eb9d84a94e5 R12: 0000000000000002 [ 744.441889] R13: ffff9407e6689600 R14: 0000000000000007 R15: 00000007bfef7a13 [ 744.441889] FS: 00007f0db13bb740(0000) GS:ffff9407f3b00000(0000) knlGS:0000000000000000 [ 744.441889] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 744.441889] CR2: 00007f0dacc51024 CR3: 000000032961a000 CR4: 00000000000006e0 [ 744.441889] Call Trace: [ 744.441889] lookup_fast+0x53/0x300 [ 744.441889] walk_component+0x49/0x350 [ 744.441889] ? inode_permission+0x63/0x1a0 [ 744.441889] link_path_walk.part.33+0x1bc/0x5a0 [ 744.441889] ? path_init+0x190/0x310 [ 744.441889] path_lookupat+0x95/0x210 [ 744.441889] filename_lookup+0xb6/0x190 [ 744.441889] ? __check_object_size+0xb8/0x1b0 [ 744.441889] ? strncpy_from_user+0x50/0x1a0 [ 744.441889] user_path_at_empty+0x36/0x40 [ 744.441889] ? user_path_at_empty+0x36/0x40 [ 744.441889] vfs_statx+0x76/0xe0 [ 744.441889] __do_sys_newstat+0x3d/0x70 [ 744.441889] __x64_sys_newstat+0x16/0x20 [ 744.441889] do_syscall_64+0x5a/0x120 [ 744.441889] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 744.441889] RIP: 0033:0x7f0db0ec2775 [ 744.441889] Code: 00 00 00 75 05 48 83 c4 18 c3 e8 26 55 02 00 66 0f 1f 44 00 00 83 ff 01 48 89 f0 77 30 48 89 c7 48 89 d6 b8 04 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 03 f3 c3 90 48 8b 15 e1 b6 2d 00 f7 d8 64 89 [ 744.441889] RSP: 002b:00007ffc36bc9388 EFLAGS: 00000246 ORIG_RAX: 0000000000000004 [ 744.441889] RAX: ffffffffffffffda RBX: 00007ffc36bc9300 RCX: 00007f0db0ec2775 [ 744.441889] RDX: 00007ffc36bc9400 RSI: 00007ffc36bc9400 RDI: 00007f0dad26f050 [ 744.441889] RBP: 0000000000c0bc60 R08: 0000000000000000 R09: 0000000000000001 [ 744.441889] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc36bc9400 [ 744.441889] R13: 0000000000000001 R14: 00000000ffffff9c R15: 0000000000c0bc60 Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: drop lock in binderfs_binder_ctl_createChristian Brauner
The binderfs_binder_ctl_create() call is a no-op on subsequent calls and the first call is done before we unlock the suberblock. Hence, there is no need to take inode_lock() in there. Let's remove it. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: kill_litter_super() before cleanupChristian Brauner
Al pointed out that first calling kill_litter_super() before cleaning up info is more correct since destroying info doesn't depend on the state of the dentries and inodes. That the opposite remains true is not guaranteed. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: rework binderfs_binder_device_create()Christian Brauner
- switch from d_alloc_name() + d_lookup() to lookup_one_len(): Instead of using d_alloc_name() and then doing a d_lookup() with the allocated dentry to find whether a device with the name we're trying to create already exists switch to using lookup_one_len(). The latter will either return the existing dentry or a new one. - switch from kmalloc() + strscpy() to kmemdup(): Use a more idiomatic way to copy the name for the new dentry that userspace gave us. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: rework binderfs_fill_super()Christian Brauner
Al pointed out that on binderfs_fill_super() error deactivate_locked_super() will call binderfs_kill_super() so all of the freeing and putting we currently do in binderfs_fill_super() is unnecessary and buggy. Let's simply return errors and let binderfs_fill_super() take care of cleaning up on error. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: prevent renaming the control dentryChristian Brauner
- make binderfs control dentry immutable: We don't allow to unlink it since it is crucial for binderfs to be useable but if we allow to rename it we make the unlink trivial to bypass. So prevent renaming too and simply treat the control dentry as immutable. - add is_binderfs_control_device() helper: Take the opportunity and turn the check for the control dentry into a separate helper is_binderfs_control_device() since it's now used in two places. - simplify binderfs_rename(): Instead of hand-rolling our custom version of simple_rename() just dumb the whole function down to first check whether we're trying to rename the control dentry. If we do EPERM the caller and if not call simple_rename(). Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: remove outdated commentChristian Brauner
The comment stems from an early version of that patchset and is just confusing now. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: use __u32 for device numbersChristian Brauner
We allow more then 255 binderfs binder devices to be created since there are workloads that require more than that. If we use __u8 we'll overflow after 255. So let's use a __u32. Note that there's no released kernel with binderfs out there so this is not a regression. Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: use correct include guards in headerChristian Brauner
When we switched over from binder_ctl.h to binderfs.h we forgot to change the include guards. It's minor but it's obviously correct. Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22staging: android: ion: Support cpu access during dma_buf_detachLiam Mark
Often userspace doesn't know when the kernel will be calling dma_buf_detach on the buffer. If userpace starts its CPU access at the same time as the sg list is being freed it could end up accessing the sg list after it has been freed. Thread A Thread B - DMA_BUF_IOCTL_SYNC IOCT - ion_dma_buf_begin_cpu_access - list_for_each_entry - ion_dma_buf_detatch - free_duped_table - dma_sync_sg_for_cpu Fix this by getting the ion_buffer lock before freeing the sg table memory. Fixes: 2a55e7b5e544 ("staging: android: ion: Call dma_map_sg for syncing and mapping") Signed-off-by: Liam Mark <lmark@codeaurora.org> Acked-by: Laura Abbott <labbott@redhat.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22can: flexcan: fix NULL pointer exception during bringupUwe Kleine-König
Commit cbffaf7aa09e ("can: flexcan: Always use last mailbox for TX") introduced a loop letting i run up to (including) ARRAY_SIZE(regs->mb) and in the body accessed regs->mb[i] which is an out-of-bounds array access that then resulted in an access to an reserved register area. Later this was changed by commit 0517961ccdf1 ("can: flexcan: Add provision for variable payload size") to iterate a bit differently but still runs one iteration too much resulting to call flexcan_get_mb(priv, priv->mb_count) which results in a WARN_ON and then a NULL pointer exception. This only affects devices compatible with "fsl,p1010-flexcan", "fsl,imx53-flexcan", "fsl,imx35-flexcan", "fsl,imx25-flexcan", "fsl,imx28-flexcan", so newer i.MX SoCs are not affected. Fixes: cbffaf7aa09e ("can: flexcan: Always use last mailbox for TX") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> # >= 4.20 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-01-22can: flexcan: fix 'passing zero to ERR_PTR()' warningYueHaibing
Fix a static code checker warning: drivers/net/can/flexcan.c:1435 flexcan_setup_stop_mode() warn: passing zero to 'PTR_ERR' Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-01-22can: bcm: check timer values before ktime conversionOliver Hartkopp
Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup() when the conversion into ktime multiplies the given value with NSEC_PER_USEC (1000). Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2 Add a check for the given tv_usec, so that the value stays below one second. Additionally limit the tv_sec value to a reasonable value for CAN related use-cases of 400 days and ensure all values to be positive. Reported-by: Kyungtae Kim <kt0755@gmail.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> # >= 2.6.26 Tested-by: Kyungtae Kim <kt0755@gmail.com> Acked-by: Andre Naujoks <nautsch2@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-01-22can: dev: __can_get_echo_skb(): fix bogous check for non-existing skb by ↵Manfred Schlaegl
removing it This patch revert commit 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") After introduction of this change we encountered following new error message on various i.MX plattforms (flexcan): | flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non | existing skb: can_priv::echo_skb[0] The introduction of the message was a mistake because priv->echo_skb[idx] = NULL is a perfectly valid in following case: If CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In this case can_put_echo_skb will not set priv->echo_skb[idx]. It is therefore kept NULL. As additional argument for revert: The order of check and usage of idx was changed. idx is used to access an array element before checking it's boundaries. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Fixes: 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-01-22drm/sun4i: hdmi: Fix usage of TMDS clockPriit Laes
Although TMDS clock is required for HDMI to properly function, nobody called clk_prepare_enable(). This fixes reference counting issues and makes sure clock is running when it needs to be running. Due to TDMS clock being parent clock for DDC clock, TDMS clock was turned on/off for each EDID probe, causing spurious failures for certain HDMI/DVI screens. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Priit Laes <priit.laes@paf.com> [Maxime: Moved the TMDS clock enable earlier] Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190122073232.7240-1-plaes@plaes.org
2019-01-22serial: fsl_lpuart: fix maximum acceptable baud rate with over-samplingTomonori Sakita
Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabledMatthias Kaehlcke
The geni set/get_mctrl() functions currently do nothing unless hardware flow control is enabled. Remove this arbitrary limitation. Suggested-by: Johan Hovold <johan@kernel.org> Fixes: 8a8a66a1a18a ("tty: serial: qcom_geni_serial: Add support for flow control") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22mmc: dw_mmc-bluefield: : Fix the license informationLiming Sun
The SPDX license identifier and the boiler plate text are contradicting. Only the SPDX license identifier is needed. The other one is removed. Fixes: 86958dcc5ad7 ("mmc: dw_mmc-bluefield: Add driver extension") Cc: stable@vger.kernel.org Reviewed-by: David Woods <dwoods@mellanox.com> Signed-off-by: Liming Sun <lsun@mellanox.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-01-22mmc: meson-gx: enable signal re-sampling together with tuningAndreas Fenkart
card detection fails on "BeeLink Mini M8 SII" if enabled too early mmc1: error -110 whilst initialising MMC card Fixes: 71645e65729f ("mmc: meson-gx: add signal resampling") Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-01-22Merge tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds
Pull XArray fixes from Matthew Wilcox: "Fix some oversights in the XArray porcelain API: - support for m68k's two-byte aligned pointers - reserving entries using xa_insert() - missing xa_insert_bh() and xa_insert_irq() functions - simplify using xa_for_each() - use lockdep correctly - a few other minor fixes and improvements" * tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix an arithmetic error in xa_is_err XArray tests: Check mark 2 gets squashed XArray: Fix typo in comment XArray: Honour reserved entries in xa_insert XArray: Permit storing 2-byte-aligned pointers XArray: Change xa_for_each iterator XArray: Turn xa_init_flags into a static inline XArray tests: Add RCU locking
2019-01-22ide: fix a typo in the settings proc file nameChristoph Hellwig
Fixes: ec7d9c9ce8 ("ide: replace ->proc_fops with ->proc_show") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-21drm/amd/powerplay: OD setting fix on Vega10Kenneth Feng
gfxclk for OD setting is limited to 1980M for non-acg ASICs of Vega10 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-22Merge tag 'iommu-fixes-v5.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "One fix only for now: Fix probe deferral in iommu/of code (broke with recent changes to iommu_ops->add_device invocation)" * tag 'iommu-fixes-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/of: Fix probe-deferral
2019-01-22Merge tag 'arc-5.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC architecture updates from Vineet Gupta: - Perf support for raw events - boot log printing: return stack, action points - fix memset to avoid prefetchw bleeding past end of buffer - do_page_fault fix for mmap_sem held while returning to userspace - other misc fixes * tag 'arc-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: lib: memeset: fix doing prefetchw outside of buffer ARC: mm: do_page_fault fixes #1: relinquish mmap_sem if signal arrives while handle_mm_fault ARC: show_regs: lockdep: re-enable preemption ARC: show_regs: lockdep: avoid page allocator... ARC: perf: avoid kernel killing where it is possible ARC: perf: move HW events mapping to separate function ARC: perf: introduce Kernel PMU events support ARC: perf: trivial code cleanup ARC: perf: map generic branches to correct hardware condition ARC: adjust memblock_reserve of kernel memory arc: remove redundant kernel-space generic-y ARC: fix __ffs return value to avoid build warnings ARC: boot log: print Action point details ARCv2: boot log: BPU return stack depth
2019-01-21tty: Handle problem if line discipline does not have receive_bufGreg Kroah-Hartman
Some tty line disciplines do not have a receive buf callback, so properly check for that before calling it. If they do not have this callback, just eat the character quietly, as we can't fail this call. Reported-by: Jann Horn <jannh@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-21dm: fix redundant IO accounting for bios that need splittingMike Snitzer
The risk of redundant IO accounting was not taken into consideration when commit 18a25da84354 ("dm: ensure bio submission follows a depth-first tree walk") introduced IO splitting in terms of recursion via generic_make_request(). Fix this by subtracting the split bio's payload from the IO stats that were already accounted for by start_io_acct() upon dm_make_request() entry. This repeat oscillation of the IO accounting, up then down, isn't ideal but refactoring DM core's IO splitting to pre-split bios _before_ they are accounted turned out to be an excessive amount of change that will need a full development cycle to refine and verify. Before this fix: /dev/mapper/stripe_dev is a 4-way stripe using a 32k chunksize, so bios are split on 32k boundaries. # fio --name=16M --filename=/dev/mapper/stripe_dev --rw=write --bs=64k --size=16M \ --iodepth=1 --ioengine=libaio --direct=1 --refill_buffers with debugging added: [103898.310264] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=0 len=128 [103898.318704] device-mapper: core: __split_and_process_bio: recursing for following split bio: [103898.329136] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=64 len=64 ... 16M written yet 136M (278528 * 512b) accounted: # cat /sys/block/dm-2/stat | awk '{ print $7 }' 278528 After this fix: 16M written and 16M (32768 * 512b) accounted: # cat /sys/block/dm-2/stat | awk '{ print $7 }' 32768 Fixes: 18a25da84354 ("dm: ensure bio submission follows a depth-first tree walk") Cc: stable@vger.kernel.org # 4.16+ Reported-by: Bryan Gurney <bgurney@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-21dm: fix clone_bio() to trigger blk_recount_segments()Mike Snitzer
DM's clone_bio() now benefits from using bio_trim() by fixing the fact that clone_bio() wasn't clearing BIO_SEG_VALID like bio_trim() does; which triggers blk_recount_segments() via bio_phys_segments(). Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-21ALSA: hda - Add mute LED support for HP ProBook 470 G5Anthony Wong
Support speaker and mic mute LEDs on HP ProBook 470 G5. BugLink: https://bugs.launchpad.net/bugs/1811254 Signed-off-by: Anthony Wong <anthony.wong@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-21ceph: quota: cleanup license messThomas Gleixner
Precise and non-ambiguous license information is important. The recently added quota.c file has a SPDX license identifier, which is nice, but at the same time it has a contradictionary license boiler plate text. SPDX-License-Identifier: GPL-2.0 versus * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. Oh well. As the other ceph related files are licensed under the GPL v2 only, it's assumed that the SPDX id is correct and the boiler plate was randomly copied into that patch. Remove the boiler plate as it is wrong and even if correct it is redundant. Fixes: fb18a57568c2 ("ceph: quota: add initial infrastructure to support cephfs quotas") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Luis Henriques <lhenriques@suse.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Sage Weil <sage@redhat.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: ceph-devel@vger.kernel.org Acked-by: Luis Henriques <lhenriques@suse.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-01-21libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()Ilya Dryomov
con_fault() can transition the connection into STANDBY right after ceph_con_keepalive() clears STANDBY in clear_standby(): libceph user thread ceph-msgr worker ceph_con_keepalive() mutex_lock(&con->mutex) clear_standby(con) mutex_unlock(&con->mutex) mutex_lock(&con->mutex) con_fault() ... if KEEPALIVE_PENDING isn't set set state to STANDBY ... mutex_unlock(&con->mutex) set KEEPALIVE_PENDING set WRITE_PENDING This triggers warnings in clear_standby() when either ceph_con_send() or ceph_con_keepalive() get to clearing STANDBY next time. I don't see a reason to condition queue_con() call on the previous value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING could have been a non-atomic flag. Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Myungho Jung <mhjungk@gmail.com>
2019-01-21ceph: clear inode pointer when snap realm gets dropped by its inodeYan, Zheng
snap realm and corresponding inode have pointers to each other. The two pointer should get clear at the same time. Otherwise, snap realm's pointer may reference freed inode. Cc: stable@vger.kernel.org # 4.17+ Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Luis Henriques <lhenriques@suse.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-01-21Linux 5.0-rc3v5.0-rc3Linus Torvalds
2019-01-21Merge tag 'pstore-v5.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fixes from Kees Cook: - Fix console ramoops to show the previous boot logs (Sai Prakash Ranjan) - Avoid allocation and leak of platform data * tag 'pstore-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Avoid allocation and leak of platform data pstore/ram: Fix console ramoops to show the previous boot logs
2019-01-21Merge tag 'gcc-plugins-v5.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc-plugins fixes from Kees Cook: "Fix ARM per-task stack protector plugin under GCC 9 (Ard Biesheuvel)" * tag 'gcc-plugins-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: arm_ssp_per_task_plugin: fix for GCC 9+ gcc-plugins: arm_ssp_per_task_plugin: sign extend the SP mask
2019-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix endless loop in nf_tables, from Phil Sutter. 2) Fix cross namespace ip6_gre tunnel hash list corruption, from Olivier Matz. 3) Don't be too strict in phy_start_aneg() otherwise we might not allow restarting auto negotiation. From Heiner Kallweit. 4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue. 5) Memory leak in act_tunnel_key, from Davide Caratti. 6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn. 7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet. 8) Missing udplite rehash callbacks, from Alexey Kodanev. 9) Log dirty pages properly in vhost, from Jason Wang. 10) Use consume_skb() in neigh_probe() as this is a normal free not a drop, from Yang Wei. Likewise in macvlan_process_broadcast(). 11) Missing device_del() in mdiobus_register() error paths, from Thomas Petazzoni. 12) Fix checksum handling of short packets in mlx5, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits) bpf: in __bpf_redirect_no_mac pull mac only if present virtio_net: bulk free tx skbs net: phy: phy driver features are mandatory isdn: avm: Fix string plus integer warning from Clang net/mlx5e: Fix cb_ident duplicate in indirect block register net/mlx5e: Fix wrong (zero) TX drop counter indication for representor net/mlx5e: Fix wrong error code return on FEC query failure net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames tools: bpftool: Cleanup license mess bpf: fix inner map masking to prevent oob under speculation bpf: pull in pkt_sched.h header for tooling to fix bpftool build selftests: forwarding: Add a test case for externally learned FDB entries selftests: mlxsw: Test FDB offload indication mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky net: bridge: Mark FDB entries that were added by user as such mlxsw: spectrum_fid: Update dummy FID index mlxsw: pci: Return error on PCI reset timeout mlxsw: pci: Increase PCI SW reset timeout mlxsw: pci: Ring CQ's doorbell before RDQ's MAINTAINERS: update email addresses of liquidio driver maintainers ...
generated by cgit (git 2.34.1) at 2025-09-14 03:45:02 +0000