summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-20bpf: Allow kfunc in tracing and syscall programs.Benjamin Tissoires
Tracing and syscall BPF program types are very convenient to add BPF capabilities to subsystem otherwise not BPF capable. When we add kfuncs capabilities to those program types, we can add BPF features to subsystems without having to touch BPF core. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220518205924.399291-2-benjamin.tissoires@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-05-20Merge branch 'add-a-bhash2-table-hashed-by-port-address'Jakub Kicinski
Joanne Koong says: ==================== Add a bhash2 table hashed by port + address This patchset proposes adding a bhash2 table that hashes by port and address. The motivation behind bhash2 is to expedite bind requests in situations where the port has many sockets in its bhash table entry, which makes checking bind conflicts costly especially given that we acquire the table entry spinlock while doing so, which can cause softirq cpu lockups and can prevent new tcp connections. We ran into this problem at Meta where the traffic team binds a large number of IPs to port 443 and the bind() call took a significant amount of time which led to cpu softirq lockups, which caused packet drops and other failures on the machine The patches are as follows: 1/2 - Adds a second bhash table (bhash2) hashed by port and address 2/2 - Adds a test for timing how long an additional bind request takes when the bhash entry is populated When experimentally testing this on a local server for ~24k sockets bound to the port, the results seen were: ipv4: before - 0.002317 seconds with bhash2 - 0.000018 seconds ipv6: before - 0.002431 seconds with bhash2 - 0.000021 seconds ==================== Link: https://lore.kernel.org/r/20220520001834.2247810-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20selftests: Add test for timing a bind request to a port with a populated ↵Joanne Koong
bhash entry This test populates the bhash table for a given port with MAX_THREADS * MAX_CONNECTIONS sockets, and then times how long a bind request on the port takes. When populating the bhash table, we create the sockets and then bind the sockets to the same address and port (SO_REUSEADDR and SO_REUSEPORT are set). When timing how long a bind on the port takes, we bind on a different address without SO_REUSEPORT set. We do not set SO_REUSEPORT because we are interested in the case where the bind request does not go through the tb->fastreuseport path, which is fragile (eg tb->fastreuseport path does not work if binding with a different uid). To run the test locally, I did: * ulimit -n 65535000 * ip addr add 2001:0db8:0:f101::1 dev eth0 * ./bind_bhash_test 443 Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: Add a second bind table hashed by port and addressJoanne Koong
We currently have one tcp bind table (bhash) which hashes by port number only. In the socket bind path, we check for bind conflicts by traversing the specified port's inet_bind2_bucket while holding the bucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, checking for a bind conflict is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch proposes adding a second bind table, bhash2, that hashes by port and ip address. Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the spinlock. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20wwan: iosm: use a flexible array rather than allocate short objectsJakub Kicinski
GCC array-bounds warns that ipc_coredump_get_list() under-allocates the size of struct iosm_cd_table *cd_table. This is avoidable - we just need a flexible array. Nothing calls sizeof() on struct iosm_cd_list or anything that contains it. Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20220520060013.2309497-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20hv_netvsc: Fix potential dereference of NULL pointerYongzhi Liu
The return value of netvsc_devinfo_get() needs to be checked to avoid use of NULL pointer in case of an allocation failure. Fixes: 0efeea5fb153 ("hv_netvsc: Add the support of hibernation") Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1652962188-129281-1-git-send-email-lyz_cs@pku.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20stcp: Use memset_after() to zero sctp_stream_out_extXiu Jianfeng
Use memset_after() helper to simplify the code, there is no functional change in this patch. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220519062932.249926-1-xiujianfeng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: mscc: fix the alignment in ocelot_port_fdb_del()Alaa Mohamed
align the extack argument of the ocelot_port_fdb_del() function. Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Link: https://lore.kernel.org/r/20220520002040.4442-1-eng.alaamohamedsoliman.am@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: vxlan: Fix kernel coding styleAlaa Mohamed
The continuation line does not align with the opening bracket and this patch fix it. Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Link: https://lore.kernel.org/r/20220520003614.6073-1-eng.alaamohamedsoliman.am@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20eth: bnxt: make ulp_id unsigned to make GCC 12 happyJakub Kicinski
GCC array bounds checking complains that ulp_id is validated only against upper bound. Make it unsigned. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220520061955.2312968-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20selftests: fib_nexthops: Make ping timeout configurableAmit Cohen
Commit 49bb39bddad2 ("selftests: fib_nexthops: Make the test more robust") increased the timeout of ping commands to 5 seconds, to make the test more robust. Make the timeout configurable using '-w' argument to allow user to change it depending on the system that runs the test. Some systems suffer from slow forwarding performance, so they may need to change the timeout. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220519070921.3559701-1-amcohen@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: wwan: t7xx: use GFP_ATOMIC under spin lock in t7xx_cldma_gpd_set_next_ptr()Yang Yingliang
Sometimes t7xx_cldma_gpd_set_next_ptr() is called under spin lock, so add 'gfp_mask' parameter in t7xx_cldma_gpd_set_next_ptr() to pass the flag. Fixes: 39d439047f1d ("net: wwan: t7xx: Add control DMA interface") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/20220519032108.2996400-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20Merge branch 'amt-fix-several-bugs-in-gateway-mode'Jakub Kicinski
Taehee Yoo says: ==================== amt: fix several bugs in gateway mode This patchset fixes bugs in amt module. First patch fixes amt gateway mode's status stuck. amt gateway and relay established so these two mode manage status. But gateway stuck to change its own status if a relay doesn't send responses. Second patch fixes a memory leak. amt gateway skips some handling of advertisement message. So, a memory leak would occur. ==================== Link: https://lore.kernel.org/r/20220519031555.3192-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: tulip: fix build with CONFIG_GSCRolf Eike Beer
Fix typo which breaks build for parisc. Fixes: 3daebfbeb455 ("net: tulip: convert to devres") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/all/CA+G9fYuCzU5VZ_nc+6NEdBXJdVCH=J2SB1Na1G_NS_0BNdGYtg@mail.gmail.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Link: https://lore.kernel.org/r/4719560.GXAFRqVoOG@eto.sf-tec.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20amt: fix memory leak for advertisement messageTaehee Yoo
When a gateway receives an advertisement message, it extracts relay information and then it should be freed. But the advertisement handler doesn't free it. So, memory leak would occur. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20amt: fix gateway mode stuckTaehee Yoo
If a gateway can not receive any response to requests from a relay, gateway resets status from SENT_REQUEST to INIT and variable about a relay as well. And then it should start the full establish step from sending a discovery message and receiving advertisement message. But, after failure in amt_req_work() it continues sending a request message step with flushed(invalid) relay information and sets SENT_REQUEST. So, a gateway can't be established with a relay. In order to avoid this situation, it stops sending the request message step if it fails. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: avoid strange behavior with skb_defer_max == 1Jakub Kicinski
When user sets skb_defer_max to 1 the kick threshold is 0 (half of 1). If we increment queue length before the check the kick will never happen, and the skb may get stranded. This is likely harmless but can be avoided by moving the increment after the check. This way skb_defer_max == 1 will always kick. Still a silly config to have, but somehow that feels more correct. While at it drop a comment which seems to be outdated or confusing, and wrap the defer_count write with a WRITE_ONCE() since it's read on the fast path that avoids taking the lock. Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220518185522.2038683-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20net: stmmac: fix out-of-bounds access in a selftestJakub Kicinski
GCC 12 points out that struct tc_action is smaller than struct tcf_action: drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c: In function ‘stmmac_test_rxp’: drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1132:21: warning: array subscript ‘struct tcf_gact[0]’ is partly outside array bounds of ‘unsigned char[272]’ [-Warray-bounds] 1132 | gact->tcf_action = TC_ACT_SHOT; | ^~ Fixes: ccfc639a94f2 ("net: stmmac: selftests: Add a selftest for Flexible RX Parser") Link: https://lore.kernel.org/r/20220519004305.2109708-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20sfc/siena: Remove duplicate check on segmentsMartin Habets
Siena only supports software TSO. This means more code can be deleted, as pointed out by the Smatch static checker warning: drivers/net/ethernet/sfc/siena/tx.c:184 __efx_siena_enqueue_skb() warn: duplicate check 'segments' (previous on line 158) Fixes: 956f2d86cb37 ("sfc/siena: Remove build references to missing functionality") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/kernel-janitors/YoH5tJMnwuGTrn1Z@kili/ Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/165294463549.23865.4557617334650441347.stgit@palantir17.mph.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20selftests/bpf: Remove filtered subtests from outputMykola Lysenko
Currently filtered subtests show up in the output as skipped. Before: $ sudo ./test_progs -t log_fixup/missing_map #94 /1 log_fixup/bad_core_relo_trunc_none:SKIP #94 /2 log_fixup/bad_core_relo_trunc_partial:SKIP #94 /3 log_fixup/bad_core_relo_trunc_full:SKIP #94 /4 log_fixup/bad_core_relo_subprog:SKIP #94 /5 log_fixup/missing_map:OK #94 log_fixup:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED After: $ sudo ./test_progs -t log_fixup/missing_map #94 /5 log_fixup/missing_map:OK #94 log_fixup:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220520061303.4004808-1-mykolal@fb.com
2022-05-20selftests/bpf: Fix subtest number formatting in test_progsMykola Lysenko
Remove weird spaces around / while preserving proper indentation Signed-off-by: Mykola Lysenko <mykolal@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Daniel Müller <deso@posteo.net> Link: https://lore.kernel.org/bpf/20220520070144.10312-1-mykolal@fb.com
2022-05-20selftests/bpf: Add missing trampoline program type to trampoline_count testYuntao Wang
Currently the trampoline_count test doesn't include any fmod_ret bpf programs, fix it to make the test cover all possible trampoline program types. Since fmod_ret bpf programs can't be attached to __set_task_comm function, as it's neither whitelisted for error injection nor a security hook, change it to bpf_modify_return_test. This patch also does some other cleanups such as removing duplicate code, dropping inconsistent comments, etc. Signed-off-by: Yuntao Wang <ytcoode@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220519150610.601313-1-ytcoode@gmail.com
2022-05-20cifs: print TIDs as hexEnzo Matsumiya
Makes these debug messages easier to read Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-20cifs: return ENOENT for DFS lookup_cache_entry()Enzo Matsumiya
EEXIST didn't make sense to use when dfs_cache_find() couldn't find a cache entry nor retrieve a referral target. It also doesn't make sense cifs_dfs_query_info_nonascii_quirk() to emulate ENOENT anymore. Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-20cifs: don't call cifs_dfs_query_info_nonascii_quirk() if nodfs was setEnzo Matsumiya
Also return EOPNOTSUPP if path is remote but nodfs was set. Fixes: a2809d0e1696 ("cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs") Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-20Merge branch 'bpf: mptcp: Support for mptcp_sock'Andrii Nakryiko
Mat Martineau says: ==================== This patch set adds BPF access to mptcp_sock structures, along with associated self tests. You may recognize some of the code from earlier (https://lore.kernel.org/bpf/20200918121046.190240-6-nicolas.rybowski@tessares.net/) but it has been reworked quite a bit. v1 -> v2: Emit BTF type, add func_id checks in verifier.c and bpf_trace.c, remove build check for CONFIG_BPF_JIT, add selftest check for CONFIG_MPTCP, and add a patch to include CONFIG_IKCONFIG/CONFIG_IKCONFIG_PROC for the BPF self tests. v2 -> v3: Access sysctl through the filesystem to work around CI use of the more limited busybox sysctl command. v3 -> v4: Dropped special case kernel code for tcp_sock is_mptcp, use existing bpf_tcp_helpers.h, and add check for 'ip mptcp monitor' support. v4 -> v5: Use BPF test skeleton, more consistent use of ASSERT macros, drop some unnecessary parameters / checks, and use tracing to acquire MPTCP token. Geliang Tang (6): bpf: add bpf_skc_to_mptcp_sock_proto selftests/bpf: Enable CONFIG_IKCONFIG_PROC in config selftests/bpf: test bpf_skc_to_mptcp_sock selftests/bpf: verify token of struct mptcp_sock selftests/bpf: verify ca_name of struct mptcp_sock selftests/bpf: verify first of struct mptcp_sock ==================== Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2022-05-20selftests/bpf: Verify first of struct mptcp_sockGeliang Tang
This patch verifies the 'first' struct member of struct mptcp_sock, which points to the first subflow of msk. Save 'sk' in mptcp_storage, and verify it with 'first' in verify_msk(). v5: - Use ASSERT_EQ() instead of a manual comparison + log (Andrii). Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/bpf/20220519233016.105670-8-mathew.j.martineau@linux.intel.com
2022-05-20selftests/bpf: Verify ca_name of struct mptcp_sockGeliang Tang
This patch verifies another member of struct mptcp_sock, ca_name. Add a new function get_msk_ca_name() to read the sysctl tcp_congestion_control and verify it in verify_msk(). v3: Access the sysctl through the filesystem to avoid compatibility issues with the busybox sysctl command. v4: use ASSERT_* instead of CHECK_FAIL (Andrii) v5: use ASSERT_STRNEQ() instead of strncmp() (Andrii) Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/bpf/20220519233016.105670-7-mathew.j.martineau@linux.intel.com
2022-05-20selftests/bpf: Verify token of struct mptcp_sockGeliang Tang
This patch verifies the struct member token of struct mptcp_sock. Add a new member token in struct mptcp_storage to store the token value of the msk socket got by bpf_skc_to_mptcp_sock(). Trace the kernel function mptcp_pm_new_connection() by using bpf fentry prog to obtain the msk token and save it in a global bpf variable. Pass the variable to verify_msk() to verify it with the token saved in socket_storage_map. v4: - use ASSERT_* instead of CHECK_FAIL (Andrii) - skip the test if 'ip mptcp monitor' is not supported (Mat) v5: - Drop 'ip mptcp monitor', trace mptcp_pm_new_connection instead (Martin) - Use ASSERT_EQ (Andrii) Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/bpf/20220519233016.105670-6-mathew.j.martineau@linux.intel.com
2022-05-20selftests/bpf: Test bpf_skc_to_mptcp_sockGeliang Tang
This patch extends the MPTCP test base, to test the new helper bpf_skc_to_mptcp_sock(). Define struct mptcp_sock in bpf_tcp_helpers.h, use bpf_skc_to_mptcp_sock to get the msk socket in progs/mptcp_sock.c and store the infos in socket_storage_map. Get the infos from socket_storage_map in prog_tests/mptcp.c. Add a new function verify_msk() to verify the infos of MPTCP socket, and rename verify_sk() to verify_tsk() to verify TCP socket only. v2: Add CONFIG_MPTCP check for clearer error messages v4: - use ASSERT_* instead of CHECK_FAIL (Andrii) - drop bpf_mptcp_helpers.h (Andrii) v5: - some 'ASSERT_*' were replaced in the next commit by mistake. - Drop CONFIG_MPTCP (Martin) - Use ASSERT_EQ (Andrii) Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/bpf/20220519233016.105670-5-mathew.j.martineau@linux.intel.com
2022-05-20selftests/bpf: Add MPTCP test baseNicolas Rybowski
This patch adds a base for MPTCP specific tests. It is currently limited to the is_mptcp field in case of plain TCP connection because there is no easy way to get the subflow sk from a msk in userspace. This implies that we cannot lookup the sk_storage attached to the subflow sk in the sockops program. v4: - add copyright 2022 (Andrii) - use ASSERT_* instead of CHECK_FAIL (Andrii) - drop SEC("version") (Andrii) - use is_mptcp in tcp_sock, instead of bpf_tcp_sock (Martin & Andrii) v5: - Drop connect_to_mptcp_fd (Martin) - Use BPF test skeleton (Andrii) - Use ASSERT_EQ (Andrii) - Drop the 'msg' parameter of verify_sk Co-developed-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/bpf/20220519233016.105670-4-mathew.j.martineau@linux.intel.com
2022-05-20selftests/bpf: Enable CONFIG_IKCONFIG_PROC in configGeliang Tang
CONFIG_IKCONFIG_PROC is required by BPF selftests, otherwise we get errors like this: libbpf: failed to open system Kconfig libbpf: failed to load object 'kprobe_multi' libbpf: failed to load BPF skeleton 'kprobe_multi': -22 It's because /proc/config.gz is opened in bpf_object__read_kconfig_file() in tools/lib/bpf/libbpf.c: file = gzopen("/proc/config.gz", "r"); So this patch enables CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC in tools/testing/selftests/bpf/config. Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220519233016.105670-3-mathew.j.martineau@linux.intel.com
2022-05-20bpf: Add bpf_skc_to_mptcp_sock_protoGeliang Tang
This patch implements a new struct bpf_func_proto, named bpf_skc_to_mptcp_sock_proto. Define a new bpf_id BTF_SOCK_TYPE_MPTCP, and a new helper bpf_skc_to_mptcp_sock(), which invokes another new helper bpf_mptcp_sock_from_subflow() in net/mptcp/bpf.c to get struct mptcp_sock from a given subflow socket. v2: Emit BTF type, add func_id checks in verifier.c and bpf_trace.c, remove build check for CONFIG_BPF_JIT v5: Drop EXPORT_SYMBOL (Martin) Co-developed-by: Nicolas Rybowski <nicolas.rybowski@tessares.net> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220519233016.105670-2-mathew.j.martineau@linux.intel.com
2022-05-20selftests/bpf: Fix some bugs in map_lookup_percpu_elem testcaseFeng Zhou
comments from Andrii Nakryiko, details in here: https://lore.kernel.org/lkml/20220511093854.411-1-zhoufeng.zf@bytedance.com/T/ use /* */ instead of // use libbpf_num_possible_cpus() instead of sysconf(_SC_NPROCESSORS_ONLN) use 8 bytes for value size fix memory leak use ASSERT_EQ instead of ASSERT_OK add bpf_loop to fetch values on each possible CPU Fixes: ed7c13776e20c74486b0939a3c1de984c5efb6aa ("selftests/bpf: add test case for bpf_map_lookup_percpu_elem") Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220518025053.20492-1-zhoufeng.zf@bytedance.com
2022-05-20h8300: remove stale bindings and symlinkArnd Bergmann
These four files are left over from the h8300 removal. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-21Merge tag 'drm-intel-fixes-2022-05-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - fix for #5806: GPU hangs and display artifacts on 5.18-rc3 on Intel GM45 - reject DMC with out-of-spec MMIO (Cc: stable) - correctly mark guilty contexts on GuC reset. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YocqqvG6PbYx3QgJ@jlahtine-mobl.ger.corp.intel.com
2022-05-21Merge tag 'drm-misc-fixes-2022-05-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fix for a memory leak in dp_mst, a (userspace) build fix for DMA_BUF_SET_NAME defines and a directory name generation fix for dmabuf stats Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220520072408.cpjzy2taugagvrh7@houat
2022-05-20cxl/port: Enable HDM Capability after validating DVSEC RangesDan Williams
CXL memory expanders that support the CXL 2.0 memory device class code include an "HDM Decoder Capability" mechanism to supplant the "CXL DVSEC Range" mechanism originally defined in CXL 1.1. Both mechanisms depend on a "mem_enable" bit being set in configuration space before either mechanism activates. When the HDM Decoder Capability is enabled the CXL DVSEC Range settings are ignored. Previously, the cxl_mem driver was relying on platform-firmware to set "mem_enable". That is an invalid assumption as there is no requirement that platform-firmware sets the bit before the driver sees a device, especially in hot-plug scenarios. Additionally, ACPI-platforms that support CXL 2.0 devices also support the ACPI CEDT (CXL Early Discovery Table). That table outlines the platform permissible address ranges for CXL operation. So, there is a need for the driver to set "mem_enable", and there is information available to determine the validity of the CXL DVSEC Ranges. Arrange for the driver to optionally enable the HDM Decoder Capability if "mem_enable" was not set by platform firmware, or the CXL DVSEC Range configuration was invalid. Be careful to only disable memory decode if the kernel was the one to enable it. In other words, if CXL is backing all of kernel memory at boot the device needs to maintain "mem_enable" and "HDM Decoder enable" all the way up to handoff back to platform firmware (e.g. ACPI S5 state entry may require CXL memory to stay active). Fixes: 560f78559006 ("cxl/pci: Retrieve CXL DVSEC memory info") Cc: Dan Carpenter <dan.carpenter@oracle.com> [dan: fix early terminiation of range-allowed loop] Cc: Ariel Sibley <ariel.sibley@microchip.com> [ariel: Memory_size must be non-zero] Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/165307136375.2499769.861793697156744166.stgit@dwillia2-xfh Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-05-20USB: new quirk for Dell Gen 2 devicesMonish Kumar R
Add USB_QUIRK_NO_LPM and USB_QUIRK_RESET_RESUME quirks for Dell usb gen 2 device to not fail during enumeration. Found this bug on own testing Signed-off-by: Monish Kumar R <monish.kumar.r@intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220520130044.17303-1-monish.kumar.r@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-20Merge tag 'usb-serial-5.19-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.19-rc1 Here are the USB-serial updates for 5.19-rc1, including: - a workaround for pl2303 devices with unexpected bcdUSB - a new modem device id Included is also a printk clean up. All but the modem-id commit have been in linux-next with no reported issues. * tag 'usb-serial-5.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Quectel BG95 modem USB: serial: pl2303: fix type detection for odd device USB: serial: ftdi_sio: clean up printk format specifier
2022-05-20Revert "speakup: Generate speakupmap.h automatically"Greg Kroah-Hartman
This reverts commit 6646b95aab5f62c049f1416a3801dec5432c348b. Stephen reports that it breaks the build for him so revert it for now. Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20220520194637.03824f7f@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-20perf: Fix sys_perf_event_open() race against selfPeter Zijlstra
Norbert reported that it's possible to race sys_perf_event_open() such that the looser ends up in another context from the group leader, triggering many WARNs. The move_group case checks for races against itself, but the !move_group case doesn't, seemingly relying on the previous group_leader->ctx == ctx check. However, that check is racy due to not holding any locks at that time. Therefore, re-check the result after acquiring locks and bailing if they no longer match. Additionally, clarify the not_move_group case from the move_group-vs-move_group race. Fixes: f63a8daa5812 ("perf: Fix event->ctx locking") Reported-by: Norbert Slusarek <nslusarek@gmx.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-05-20Merge tag 'gpio-fixes-for-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix bitops logic in gpio-vf610 - return an error if the user tries to use inverted polarity in gpio-mvebu * tag 'gpio-fixes-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mvebu/pwm: Refuse requests with inverted polarity gpio: gpio-vf610: do not touch other bits when set the target bit
2022-05-20Merge tag 'mmc-v5.18-rc4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "MMC core: - Fix busy polling for MMC_SEND_OP_COND again" * tag 'mmc-v5.18-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Fix busy polling for MMC_SEND_OP_COND again
2022-05-20Merge tag 'ceph-for-5.18-rc8' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "A fix for a nasty use-after-free, marked for stable" * tag 'ceph-for-5.18-rc8' of https://github.com/ceph/ceph-client: libceph: fix misleading ceph_osdc_cancel_request() comment libceph: fix potential use-after-free on linger ping and resends
2022-05-20Merge tag 'riscv-for-linus-5.18-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - fix the fu540-c000 device tree to avoid a schema check failure on the DMA node name - fix typo in the PolarFire SOC device tree * tag 'riscv-for-linus-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: microchip: fix gpio1 reg property typo riscv: dts: sifive: fu540-c000: align dma node name with dtschema
2022-05-20Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Three arm64 fixes for -rc8/final. The MTE and stolen time fixes have been doing the rounds for a little while, but review and testing feedback was ongoing until earlier this week. The kexec fix showed up on Monday and addresses a failure observed under Qemu. Summary: - Add missing write barrier to publish MTE tags before a pte update - Fix kexec relocation clobbering its own data structures - Fix stolen time crash if a timer IRQ fires during CPU hotplug" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mte: Ensure the cleared tags are visible before setting the PTE arm64: kexec: load from kimage prior to clobbering arm64: paravirt: Use RCU read locks to guard stolen_time
2022-05-20hwmon: (pmbus/ltc2978) Add chip specific write_byte_dataMårten Lindahl
Several of the manuals for devices supported by this driver describes the need for a minimum wait time before the chip is ready to receive next command. This wait time is already implemented in the driver as a ltc_wait_ready function with a driver defined wait time of 100 ms, and is considered for specific devices before reading/writing data on the pmbus. Since this driver uses the default pmbus_regulator_ops for the enable/ disable/is_enabled functions we should add a driver specific callback for write_byte_data to prevent bypassing the wait time recommendations for the following devices: ltc3880/ltc3882/ltc3883/ltc3884/ltc3886/ ltc3887/ltc3889/ltm4664/ltm4675/ltm4676/ltm4677/ltm4678/ltm4680/ltm4686/ ltm4700/ltc7880. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220428144039.2464667-4-marten.lindahl@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-20hwmon: (pmbus) Use _pmbus_read_byte_data with callbackMårten Lindahl
Some of the pmbus core functions uses pmbus_read_byte_data, which does not support driver callbacks for chip specific write operations. This could potentially influence some specific regulator chips that for example need a time delay before each data access. Lets use _pmbus_read_byte_data with callback check. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220428144039.2464667-3-marten.lindahl@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-05-20hwmon: (pmbus) Introduce and use write_byte_data callbackMårten Lindahl
Some of the pmbus core functions uses pmbus_write_byte_data, which does not support driver callbacks for chip specific write operations. This could potentially influence some specific regulator chips that for example need a time delay before each data access. Lets add support for driver callback with _pmbus_write_byte_data. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20220428144039.2464667-2-marten.lindahl@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit (git 2.34.1) at 2025-09-22 03:22:00 +0000