summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-01net: phy: Fix the mdix_ctrl changesRaju Lakkaraju
PHY drivers to have an eth_tp_mdix_ctrl to indicate what is the configured MDI setting, and read eth_tp_mdi to indicate what is the current status, Add new parameter mdix_ctrl in phy_device structure and fix driver. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01net: phy: Add mdi(x) support in Microsemi PHYs driverRaju Lakkaraju
To connect two ports of the same configuration (MDI to MDI or MDI-X to MDI-X) with a 10/100/1000 Mbit/s connection, an Ethernet crossover cable is needed to cross over the transmit and receive signals in the cable, so that they are matched at the connector level. When connecting an MDI port to an MDI-X port a straight through cable is used while to connect two MDI ports or two MDI-X ports a crossover cable must be used. Conventionally MDI is used on end devices while MDI-X is used on hubs and switches Auto MDI-X automatically detects the required cable connection type and configures the connection appropriately, removing the need for crossover cables to interconnect switches or connecting PCs peer-to-peer. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01net: phy: update the mdix_ctrl with correct value.Raju Lakkaraju
Update the mdix and mdix_ctrl with corresponding ethtool configuration parameters. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01net: phy: add mdix_ctrl to hold the user configuration.Raju Lakkaraju
Add new parameter mdix_ctrl to hold the user configuration. Existing mdix maintain the current status of MDI(X) crossover performed or not. mdix_ctrl can configure either ETH_TP_MDI or ETH_TP_MDI_X orETH_TP_MDI_AUTO. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net This is a large batch of Netfilter fixes for net, they are: 1) Three patches to fix NAT conversion to rhashtable: Switch to rhlist structure that allows to have several objects with the same key. Moreover, fix wrong comparison logic in nf_nat_bysource_cmp() as this is expecting a return value similar to memcmp(). Change location of the nat_bysource field in the nf_conn structure to avoid zeroing this as it breaks interaction with SLAB_DESTROY_BY_RCU and lead us to crashes. From Florian Westphal. 2) Don't allow malformed fragments go through in IPv6, drop them, otherwise we hit GPF, patch from Florian Westphal. 3) Fix crash if attributes are missing in nft_range, from Liping Zhang. 4) Fix arptables 32-bits userspace 64-bits kernel compat, from Hongxu Jia. 5) Two patches from David Ahern to fix netfilter interaction with vrf. From David Ahern. 6) Fix element timeout calculation in nf_tables, we take milliseconds from userspace, but we use jiffies from kernelspace. Patch from Anders K. Pedersen. 7) Missing validation length netlink attribute for nft_hash, from Laura Garcia. 8) Fix nf_conntrack_helper documentation, we don't default to off anymore for a bit of time so let's get this in sync with the code. I know is late but I think these are important, specifically the NAT bits, as they are mostly addressing fallout from recent changes. I also read there are chances to have -rc8, if that is the case, that would also give us a bit more time to test this. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01perf annotate: AArch64 supportKim Phillips
This is a regex converted version from the original: https://lkml.org/lkml/2016/5/19/461 Add basic support to recognise AArch64 assembly. This allows perf to identify AArch64 instructions that branch to other parts within the same function, thereby properly annotating them. Rebased onto new cross-arch annotation bits: https://lkml.org/lkml/2016/11/25/546 Sample output: security_file_permission vmlinux 5.80 │ ← ret ▒ │70: ldr w0, [x21,#68] ▒ 4.44 │ ↓ tbnz d0 ▒ │ mov w0, #0x24 // #36 ▒ 1.37 │ ands w0, w22, w0 ▒ │ ↑ b.eq 60 ▒ 1.37 │ ↓ tbnz e4 ▒ │ mov w19, #0x20000 // #131072 ▒ 1.02 │ ↓ tbz ec ▒ │90:┌─→ldr x3, [x21,#24] ▒ 1.37 │ │ add x21, x21, #0x10 ▒ │ │ mov w2, w19 ▒ 1.02 │ │ mov x0, x21 ▒ │ │ mov x1, x3 ▒ 1.71 │ │ ldr x20, [x3,#48] ▒ │ │→ bl __fsnotify_parent ▒ 0.68 │ │↑ cbnz 60 ▒ │ │ mov x2, x21 ▒ 1.37 │ │ mov w1, w19 ▒ │ │ mov x0, x20 ▒ 0.68 │ │ mov w5, #0x0 // #0 ▒ │ │ mov x4, #0x0 // #0 ▒ 1.71 │ │ mov w3, #0x1 // #1 ▒ │ │→ bl fsnotify ▒ 1.37 │ │↑ b 60 ▒ │d0:│ mov w0, #0x0 // #0 ▒ │ │ ldp x19, x20, [sp,#16] ▒ │ │ ldp x21, x22, [sp,#32] ▒ │ │ ldp x29, x30, [sp],#48 ▒ │ │← ret ▒ │e4:│ mov w19, #0x10000 // #65536 ▒ │ └──b 90 ◆ │ec: brk #0x800 ▒ Press 'h' for help on key bindings Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Chris Ryder <chris.ryder@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20161130092344.012e18e3e623bea395162f95@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf annotate: Use arch->objdump.comment_char in dec__parse()Kim Phillips
Presume neglected in commit 786c1b5 "perf annotate: Start supporting cross arch annotation". This doesn't fix a bug since none of the affected arches support parsing dec/inc instructions yet. Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Ryder <chris.ryder@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20161130092333.1cca5dd2c77e1790d61c1e9c@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf report: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: Using the perf.data file captured via 'perf kmem record': # perf report --header-only # ======== # captured on: Tue Nov 29 16:01:53 2016 # hostname : jouet # os release : 4.8.8-300.fc25.x86_64 # perf version : 4.9.rc6.g5a6aca # arch : x86_64 # nrcpus online : 4 # nrcpus avail : 4 # cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz # cpuid : GenuineIntel,6,61,4 # total memory : 20254660 kB # cmdline : /home/acme/bin/perf kmem record usleep 1 # event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ # event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl # event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type # event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s # event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } = # event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im # HEADER_CACHE info available, use -I to display # missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT # ======== # # # Looking at just the histogram entries for the first event: # # perf report | head -33 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 40 of event 'kmem:kmalloc' # Event count (approx.): 40 # # Overhead Trace output # ........ ............................................................................................................... # 37.50% call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL 10.00% call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO 7.50% call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO 2.50% call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO 2.50% call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO 2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO 2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO # # # And then limiting using the example for 'perf kmem stat --time' used # # in the previous changeset committer note we see that there were no # # kmem:kmalloc in that last part of the file, but there were some # # kmem:kmem_cache_alloc ones: # # perf report --time 20119.782088, --stdio # # Total Lost Samples: 0 # # Samples: 0 of event 'kmem:kmalloc' # Event count (approx.): 0 # # Overhead Trace output # ........ ............ # # Samples: 0 of event 'kmem:kmalloc_node' # Event count (approx.): 0 # # Overhead Trace output # ........ ............ # # Samples: 0 of event 'kmem:kfree' # Event count (approx.): 0 # # Overhead Trace output # ........ ............ # # Samples: 8 of event 'kmem:kmem_cache_alloc' # Event count (approx.): 8 # # Overhead Trace output # ........ .................................................................................................................. # 75.00% call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO 12.50% call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK 12.50% call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf kmem: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf kmem record usleep 1 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 1.540 MB perf.data (2049 samples) ] # perf evlist kmem:kmalloc kmem:kmalloc_node kmem:kfree kmem:kmem_cache_alloc kmem:kmem_cache_alloc_node kmem:kmem_cache_free # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # # # Use 'perf script' to get a first approach, select a chunk for then using # # with 'perf kmem stat --time' # # perf script | tail -15 usleep 9889 [0] 20119.782088: kmem:kmem_cache_free: (selinux_file_free_security+0x27) call_site=ffffffffb936aa07 ptr=0xffff888a1df49fc0 perf 9888 [3] 20119.782088: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782089: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782090: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782090: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO usleep 9889 [0] 20119.782091: kmem:kmem_cache_alloc: (__sigqueue_alloc+0x4a) call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK perf 9888 [3] 20119.782091: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782093: kmem:kmem_cache_free: (__sigqueue_free.part.17+0x33) call_site=ffffffffb90ad3f3 ptr=0xffff8889f071f6e0 perf 9888 [3] 20119.782098: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782098: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782099: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782100: kmem:kmem_cache_alloc: (alloc_buffer_head+0x21) call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782101: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782102: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782103: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 # # # stats for the whole perf.data file, i.e. no interval specified # # perf kmem stat SUMMARY (SLAB allocator) ======================== Total bytes requested: 172,628 Total bytes allocated: 173,088 Total bytes freed: 161,280 Net total bytes allocated: 11,808 Total bytes wasted on internal fragmentation: 460 Internal fragmentation: 0.265761% Cross CPU allocations: 0/851 # # # stats for an end open interval, after a certain time: # # perf kmem stat --time 20119.782088, SUMMARY (SLAB allocator) ======================== Total bytes requested: 552 Total bytes allocated: 552 Total bytes freed: 448 Net total bytes allocated: 104 Total bytes wasted on internal fragmentation: 0 Internal fragmentation: 0.000000% Cross CPU allocations: 0/8 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-6-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf sched timehist: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf script: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for some amount of time and analyze a segment of interest within that window. Committer notes: Testing it: # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # # perf script --hide-call-graph | head -15 swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370048: 126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370049: 2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370051: 58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370059: 1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370062: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux) perf 5124 [2] 9693.370076: 1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux) perf 5124 [2] 9693.370091: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) perf 5124 [2] 9693.370095: 3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) # # perf script --hide-call-graph --time ,9693.370048 swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) # perf script --hide-call-graph --time 9693.370064,9693.370076 swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux) # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf tools: Move parse_nsec_time to time-utils.cDavid Ahern
Code move only; no functional change intended. Committer notes: Fix the build on Ubuntu 16.04 x86-64 cross-compiling to S/390, with this set of auto-detected features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ on ] Where it was failing with: CC /tmp/build/perf/util/time-utils.o util/time-utils.c: In function 'parse_nsec_time': util/time-utils.c:17:13: error: implicit declaration of function 'strtoul' [-Werror=implicit-function-declaration] time_sec = strtoul(str, &end, 10); ^ util/time-utils.c:17:2: error: nested extern declaration of 'strtoul' [-Werror=nested-externs] time_sec = strtoul(str, &end, 10); ^ util/time-utils.c: In function 'perf_time__parse_str': util/time-utils.c:93:2: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration] free(str); ^ util/time-utils.c:93:2: error: incompatible implicit declaration of built-in function 'free' [-Werror] util/time-utils.c:93:2: note: include '<stdlib.h>' or provide a declaration of 'free' Do as suggested and add a '#include <stdlib.h>' to get the free() and strtoul() declarations and fix the build. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf tools: Add time-based utility functionsDavid Ahern
Add function to parse a user time string of the form <start>,<stop> where start and stop are time in sec.nsec format. Both start and stop times are optional. Add function to determine if a sample time is within a given time time window of interest. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01vfio: Fix handling of error returned by 'vfio_group_get_from_dev()'Christophe JAILLET
'vfio_group_get_from_dev()' seems to return only NULL on error, not an error pointer. Fixes: 2169037dc322 ("vfio iommu: Added pin and unpin callback functions to vfio_iommu_driver_ops") Fixes: c086de818dd8 ("vfio iommu: Add blocking notifier to notify DMA_UNMAP") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-12-01block: factor out req_set_nomergeRitesh Harjani
Factor out common code for setting REQ_NOMERGE flag which is being used out at certain places and make it a helper instead, req_set_nomerge(). Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Get rid of the inline. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01block: protect iterate_bdevs() against concurrent closeRabin Vincent
If a block device is closed while iterate_bdevs() is handling it, the following NULL pointer dereference occurs because bdev->b_disk is NULL in bdev_get_queue(), which is called from blk_get_backing_dev_info() (in turn called by the mapping_cap_writeback_dirty() call in __filemap_fdatawrite_range()): BUG: unable to handle kernel NULL pointer dereference at 0000000000000508 IP: [<ffffffff81314790>] blk_get_backing_dev_info+0x10/0x20 PGD 9e62067 PUD 9ee8067 PMD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 1 PID: 2422 Comm: sync Not tainted 4.5.0-rc7+ #400 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) task: ffff880009f4d700 ti: ffff880009f5c000 task.ti: ffff880009f5c000 RIP: 0010:[<ffffffff81314790>] [<ffffffff81314790>] blk_get_backing_dev_info+0x10/0x20 RSP: 0018:ffff880009f5fe68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88000ec17a38 RCX: ffffffff81a4e940 RDX: 7fffffffffffffff RSI: 0000000000000000 RDI: ffff88000ec176c0 RBP: ffff880009f5fe68 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88000ec17860 R13: ffffffff811b25c0 R14: ffff88000ec178e0 R15: ffff88000ec17a38 FS: 00007faee505d700(0000) GS:ffff88000fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000508 CR3: 0000000009e8a000 CR4: 00000000000006e0 Stack: ffff880009f5feb8 ffffffff8112e7f5 0000000000000000 7fffffffffffffff 0000000000000000 0000000000000000 7fffffffffffffff 0000000000000001 ffff88000ec178e0 ffff88000ec17860 ffff880009f5fec8 ffffffff8112e81f Call Trace: [<ffffffff8112e7f5>] __filemap_fdatawrite_range+0x85/0x90 [<ffffffff8112e81f>] filemap_fdatawrite+0x1f/0x30 [<ffffffff811b25d6>] fdatawrite_one_bdev+0x16/0x20 [<ffffffff811bc402>] iterate_bdevs+0xf2/0x130 [<ffffffff811b2763>] sys_sync+0x63/0x90 [<ffffffff815d4272>] entry_SYSCALL_64_fastpath+0x12/0x76 Code: 0f 1f 44 00 00 48 8b 87 f0 00 00 00 55 48 89 e5 <48> 8b 80 08 05 00 00 5d RIP [<ffffffff81314790>] blk_get_backing_dev_info+0x10/0x20 RSP <ffff880009f5fe68> CR2: 0000000000000508 ---[ end trace 2487336ceb3de62d ]--- The crash is easily reproducible by running the following command, if an msleep(100) is inserted before the call to func() in iterate_devs(): while :; do head -c1 /dev/nullb0; done > /dev/null & while :; do sync; done Fix it by holding the bd_mutex across the func() call and only calling func() if the bdev is opened. Cc: stable@vger.kernel.org Fixes: 5c0d6b60a0ba ("vfs: Create function for iterating over block devices") Reported-and-tested-by: Wei Fang <fangwei1@huawei.com> Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01Merge tag 'usb-serial-4.10-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.10-rc1 These updates include a new driver for Fintek F8153x devices, support for the GPIO functionality on CP2105 devices, and improved support for CH34X devices. Included are also some clean ups and fixes for various minor issues. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-12-01KVM: use after free in kvm_ioctl_create_device()Dan Carpenter
We should move the ops->destroy(dev) after the list_del(&dev->vm_node) so that we don't use "dev" after freeing it. Fixes: a28ebea2adc4 ("KVM: Protect device ops->create and list_add with kvm->lock") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-12-01drm: Make the connector .detect() callback optionalLaurent Pinchart
Many drivers (21 to be exact) create connectors that are always connected (for instance to an LVDS or DSI panel). Instead of forcing them to implement a dummy .detect() handler, make the callback optional and consider the connector as always connected in that case. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jyri Sarha <jsarha@ti.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Vincent Abriou <vincent.abriou@st.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c] Signed-off-by: Sean Paul <seanpaul@chromium.org>
2016-12-01block: mtip32xx: set error code on failurePan Bian
Fix bug https://bugzilla.kernel.org/show_bug.cgi?id=188531. In function mtip_block_initialize(), variable rv takes the return value, and its value should be negative on errors. rv is initialized as 0 and is not reset when the call to ida_pre_get() fails. So 0 may be returned. The return value 0 indicates that there is no error, which may be inconsistent with the execution status. This patch fixes the bug by explicitly assigning -ENOMEM to rv on the branch that ida_pre_get() fails. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01nvmet: add support for the Write Zeroes commandChaitanya Kulkarni
Add support for handling write zeroes command on target. Call into __blkdev_issue_zeroout, which the block layer expands into the best suitable variant of zeroing the LBAs. Allow write zeroes operation to deallocate the LBAs when calling __blkdev_issue_zeroout. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01nvme: add support for the Write Zeroes commandChaitanya Kulkarni
Allow write zeroes operations (REQ_OP_WRITE_ZEROES) on the block device, if the device supports optional command bit set for write zeroes. Add support to setup write zeroes command. Set maximum possible write zeroes sectors in one write zeroes command according to nvme write zeroes command definition. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01nvme.h: add Write Zeroes definitionsChaitanya Kulkarni
Add the command structure, optional command set support (ONCS) bit and a new error code for the Write Zeroes command. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01block: add support for REQ_OP_WRITE_ZEROESChaitanya Kulkarni
This adds a new block layer operation to zero out a range of LBAs. This allows to implement zeroing for devices that don't use either discard with a predictable zero pattern or WRITE SAME of zeroes. The prominent example of that is NVMe with the Write Zeroes command, but in the future, this should also help with improving the way zeroing discards work. For this operation, suitable entry is exported in sysfs which indicate the number of maximum bytes allowed in one write zeroes operation by the device. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01block: add async variant of blkdev_issue_zerooutChaitanya Kulkarni
Similar to __blkdev_issue_discard this variant allows submitting the final bio asynchronously and chaining multiple ranges into a single completion. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01block: Check partition alignment on zoned block devicesDamien Le Moal
Both blkdev_report_zones and blkdev_reset_zones can operate on a partition of a zoned block device. However, the first and last zones reported for a partition make sense only if the partition start sector and size are aligned on the device zone size. The same applies for zone reset. Resetting the first or the last zone of a partition straddling zones may impact neighboring partitions. Finally, if a partition start sector is not at the beginning of a sequential zone, it will be impossible to write to the first sectors of the partition on a host-managed device. Avoid all these problems and incoherencies by ignoring partitions that are not zone aligned. Note: Even with CONFIG_BLK_DEV_ZONED disabled, bdev_is_zoned() will report the correct disk zoning type (host-aware, host-managed or none) but bdev_zone_size() will always return 0 for zoned block devices (i.e. the zone size is unknown). So test this as a way to ensure that a zoned block device is being handled as such. As a result, for a host-aware devices, unaligned zone partitions will be accepted with CONFIG_BLK_DEV_ZONED disabled. That is, the disk will be treated as a regular block device (as it should). If zoned block device support is enabled, only aligned partitions will be accepted. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-01cpufreq: intel_pstate: Add Knights Mill CPUIDPiotr Luc
Add Knights Mill (KNM) to the list of CPUIDs supported by intel_pstate. Signed-off-by: Piotr Luc <piotr.luc@intel.com> Reviewed-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01MAINTAINERS: Add bug tracking system location entry for cpufreqRafael J. Wysocki
The kernel Bugzilla is used for tracking cpufreq bugs, so document that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Len Brown <len.brown@intel.com>
2016-12-01Merge tag 'kvm-arm-for-4.9-rc7' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM updates for v4.9-rc7 - Do not call kvm_notify_acked for PPIs
2016-12-01alarmtimer: Add tracepoints for alarm timersBaolin Wang
Alarm timers are one of the mechanisms to wake up a system from suspend, but there exist no tracepoints to analyse which process/thread armed an alarmtimer. Add tracepoints for start/cancel/expire of individual alarm timers and one for tracing the suspend time decision when to resume the system. The following trace excerpt illustrates the new mechanism: Binder:3292_2-3304 [000] d..2 149.981123: alarmtimer_cancel: alarmtimer:ffffffc1319a7800 type:REALTIME expires:1325463120000000000 now:1325376810370370245 Binder:3292_2-3304 [000] d..2 149.981136: alarmtimer_start: alarmtimer:ffffffc1319a7800 type:REALTIME expires:1325376840000000000 now:1325376810370384591 Binder:3292_9-3953 [000] d..2 150.212991: alarmtimer_cancel: alarmtimer:ffffffc1319a5a00 type:BOOTTIME expires:179552000000 now:150154008122 Binder:3292_9-3953 [000] d..2 150.213006: alarmtimer_start: alarmtimer:ffffffc1319a5a00 type:BOOTTIME expires:179551000000 now:150154025622 system_server-3000 [002] ...1 162.701940: alarmtimer_suspend: alarmtimer type:REALTIME expires:1325376840000000000 The wakeup time which is selected at suspend time allows to map it back to the task arming the timer: Binder:3292_2. [ tglx: Store alarm timer expiry time instead of some useless RTC relative information, add proper type information for wakeups which are handled via the clock_nanosleep/freezer and massage the changelog. ] Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Link: http://lkml.kernel.org/r/1480372524-15181-5-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-01Merge back earlier cpuidle material for v4.10.Rafael J. Wysocki
2016-12-01MAINTAINERS: Add Jacob Pan as a new intel_idle maintainerRafael J. Wysocki
The intel_idle driver is going to be maintained by Jacob Pan now, so update MAINTAINERS accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Len Brown <len.brown@intel.com>
2016-12-01MAINTAINERS: Add bug tracking system location entries for cpuidleRafael J. Wysocki
The kernel Bugzilla is used for tracking bugs in the cpuidle core and intel_idle, so document that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Len Brown <len.brown@intel.com>
2016-12-01ACPICA: Tables: Add an error message complaining driver bugsLv Zheng
ACPICA commit 68af3c3aa238dd8040e846ac6b4827a016434d8d During early OS boot stage, drivers that have mapped system memory should unmap it during the same stage. Linux kernel has an error message indicating the unbalanced early memory mappings. This patch back ports such error message into ACPICA for the early table mappings, so that ACPICA development environment is also aware of this OS specific requirement and thus is able to ensure the consistent quality locally. Lv Zheng. Link: https://github.com/acpica/acpica/commit/68af3c3a Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01ACPICA: Tables: Add acpi_tb_unload_table()Lv Zheng
ACPICA commit 80e24663b212daac0c32767fdbd8a46892292f1f This patch introduces acpi_tb_unload_table() to eliminate redundant code from acpi_ex_unload_table() and acpi_unload_parent_table(). No functional change. Lv Zheng. Link: https://github.com/acpica/acpica/commit/80e24663 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01ACPICA: Tables: Cleanup acpi_tb_install_and_load_table()Lv Zheng
ACPICA commit 7fdac0289faa1c28b91413c8e394e87372aa69e6 acpi_tb_install_and_load_table() can invoke acpi_tb_load_table() to eliminate redundant code. No functional change. Lv Zheng. Link: https://github.com/acpica/acpica/commit/7fdac028 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01ACPICA: Events: Fix acpi_ev_initialize_region() return valueLv Zheng
ACPICA commit 543342ab7a676f4eb0c9f100d349388a84dff0e8 This patch changes acpi_ev_initialize_region(), stop returning AE_NOT_EXIST from it so that, not only in acpi_ds_load2_end_op(), but all places invoking this function won't emit exceptions. The exception can be seen in acpi_ds_initialize_objects() when certain table loading mode is chosen. This patch also removes useless acpi_ns_locked from acpi_ev_initialize_region() as this function will always be invoked with interpreter lock held now, and the lock granularity has been tuned to lock around _REG execution, thus it is now handled by acpi_ex_exit_interpreter(). Lv Zheng. Link: https://github.com/acpica/acpica/commit/543342ab Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01ACPICA: Back port of "ACPICA: Dispatcher: Tune interpreter lock around ↵Lv Zheng
AcpiEvInitializeRegion()" ACPICA commit bc481e758e54f7644fd0b657119ca7763d8b6a9c This is a back port result of the following commit: Commit: 8633db6b027952449e155a316f4ae3a530bbe18f Subject: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region() Link: https://github.com/acpica/acpica/commit/bc481e75 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01net: can: usb: kvaser_usb: fix spelling mistake of "outstanding"Colin Ian King
Trivial fix to spelling mistake "oustanding" to "outstanding" in comment and dev_dbg message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-01can: rcar_canfd: Correct order of interrupt specifiersGeert Uytterhoeven
According to both DTS (example and actual files), and Linux driver code, the first interrupt specifier should be the Channel interrupt, while the second interrupt specifier should be the Global interrupt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-01can: rcar_canfd: Add r8a7796 supportChris Paterson
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-01can: rcar_can: Add r8a7796 supportChris Paterson
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-01ACPICA: Namespace: Add acpi_ns_handle_to_name()Lv Zheng
ACPICA commit f9fe27a68a90c9d32dd3156241a5e788fb6956ea This patch adds acpi_ns_handle_to_name() so that in the acpi_get_name(): 1. Logics can be made simpler, 2. Lock held for acpi_ns_handle_to_name() can also be applied to acpi_ns_handle_to_pathname(). The lock might be useless (see Link 1 below), but kept as acpi_get_name() is an external API. Except the lock correction, this patch is a functional no-op. BZ 1182, Lv Zheng. Link: https://github.com/acpica/acpica/commit/f9fe27a6 Link: https://bugs.acpica.org/show_bug.cgi?id=1182 [# 1] Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01Merge back earlier ACPICA material for v4.10.Rafael J. Wysocki
2016-12-01can: peak: Add support for PCAN-USB X6 USB interfaceStephane Grosjean
This adds support for PEAK-System PCAN-USB X6 USB to CAN interface. The CAN FD adapter PCAN-USB X6 allows the connection of up to 6 CAN FD or CAN networks to a computer via USB. The interface is installed in an aluminum profile casing and is shipped in versions with D-Sub connectors or M12 circular connectors. The PCAN-USB X6 registers in the USB sub-system as if 3x PCAN-USB-Pro FD adapters were plugged. So, this patch: - updates the PEAK_USB entry of the corresponding Kconfig file - defines and adds the device id. of the PCAN-USB X6 (0x0014) into the table of supported device ids - defines and adds the new software structure implementing the PCAN-USB X6, which is obviously a clone of the software structure implementing the PCAN-USB Pro FD. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-01can: peak: Fix bittiming fields size in bitsStephane Grosjean
This fixes the bitimings fields ranges supported by all the CAN-FD USB interfaces of the PEAK-System CAN-FD adapters. Very first development versions of the IP core API defined smaller TSGEx and SJW fields for both nominal and data bittimings records than the production versions. This patch fixes them by enlarging their sizes to the actual values: field: old size: fixed size: nominal TSGEG1 6 8 nominal TSGEG2 4 7 nominal SJW 4 7 data TSGEG1 4 5 data TSGEG2 3 4 data SJW 2 4 Note that this has no other consequences than offering larger choice to bitrate encoding. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-01Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.10. Major changes: ath10k * add spectral scan support for QCA6174 and QCA9377 families * show used tx bitrate with 10.4 firmware wil6210 * add power save mode support * add abort scan functionality * add support settings retry limit for short frames
2016-12-01rtl8xxxu: Work around issue with 8192eu and 8723bu devices not reconnectingJes Sorensen
The H2C MEDIA_STATUS_RPT command for some reason causes 8192eu and 8723bu devices not being able to reconnect. Reported-by: Barry Day <briselec@gmail.com> Cc: <stable@vger.kernel.org> #4.8+ Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-01powerpc/64: Fix placement of .text to be immediately following .head.textNicholas Piggin
Do not introduce any additional alignment. Placement of text section will be set by fixed section macros. Without this, output section alignment defaults to 4096, which makes BookE text section start at 0x1000 when it is expected to start at 0x100. This was introduced by commit 57f266497d81 ("powerpc: Use gas sections for arranging exception vectors") and was caught with the scripted head section checker (not yet merged). Fixes: 57f266497d81 ("powerpc: Use gas sections for arranging exception vectors") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-12-01powerpc/eeh: Fix deadlock when PE frozen state can't be clearedAndrew Donnellan
In eeh_reset_device(), we take the pci_rescan_remove_lock immediately after after we call eeh_reset_pe() to reset the PCI controller. We then call eeh_clear_pe_frozen_state(), which can return an error. In this case, we bail out of eeh_reset_device() without calling pci_unlock_rescan_remove(). Add a call to pci_unlock_rescan_remove() in the eeh_clear_pe_frozen_state() error path so that we don't cause a deadlock later on. Reported-by: Pradipta Ghosh <pradghos@in.ibm.com> Fixes: 78954700631f ("powerpc/eeh: Avoid I/O access during PE reset") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-19 12:11:40 +0000