summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-06-02 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) BPF uapi fix in struct bpf_prog_info and struct bpf_map_info in order to fix offsets on 32 bit archs. This will have a minor merge conflict with net-next which has the __u32 gpl_compatible:1 bitfield in struct bpf_prog_info at this location. Resolution is to use the gpl_compatible member. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01bpf: fix uapi hole for 32 bit compat applicationsDaniel Borkmann
In 64 bit, we have a 4 byte hole between ifindex and netns_dev in the case of struct bpf_map_info but also struct bpf_prog_info. In net-next commit b85fab0e67b ("bpf: Add gpl_compatible flag to struct bpf_prog_info") added a bitfield into it to expose some flags related to programs. Thus, add an unnamed __u32 bitfield for both so that alignment keeps the same in both 32 and 64 bit cases, and can be naturally extended from there as in b85fab0e67b. Before: # file test.o test.o: ELF 32-bit LSB relocatable, Intel 80386, version 1 (SYSV), not stripped # pahole test.o struct bpf_map_info { __u32 type; /* 0 4 */ __u32 id; /* 4 4 */ __u32 key_size; /* 8 4 */ __u32 value_size; /* 12 4 */ __u32 max_entries; /* 16 4 */ __u32 map_flags; /* 20 4 */ char name[16]; /* 24 16 */ __u32 ifindex; /* 40 4 */ __u64 netns_dev; /* 44 8 */ __u64 netns_ino; /* 52 8 */ /* size: 64, cachelines: 1, members: 10 */ /* padding: 4 */ }; After (same as on 64 bit): # file test.o test.o: ELF 32-bit LSB relocatable, Intel 80386, version 1 (SYSV), not stripped # pahole test.o struct bpf_map_info { __u32 type; /* 0 4 */ __u32 id; /* 4 4 */ __u32 key_size; /* 8 4 */ __u32 value_size; /* 12 4 */ __u32 max_entries; /* 16 4 */ __u32 map_flags; /* 20 4 */ char name[16]; /* 24 16 */ __u32 ifindex; /* 40 4 */ /* XXX 4 bytes hole, try to pack */ __u64 netns_dev; /* 48 8 */ __u64 netns_ino; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ /* size: 64, cachelines: 1, members: 10 */ /* sum members: 60, holes: 1, sum holes: 4 */ }; Reported-by: Dmitry V. Levin <ldv@altlinux.org> Reported-by: Eugene Syromiatnikov <esyr@redhat.com> Fixes: 52775b33bb507 ("bpf: offload: report device information about offloaded maps") Fixes: 675fc275a3a2d ("bpf: offload: report device information for offloaded programs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-01tools/power turbostat: update version numberLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Add Node in outputPrarit Bhargava
Output a Node column if there is more than one node/socket. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: add node information into turbostat calculationsPrarit Bhargava
The previous patches have added node information to turbostat, but the counters code does not take it into account. Add node information from cpu_topology calculations to turbostat counters. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: remove num_ from cpu_topology structPrarit Bhargava
Cleanup, remove num_ from num_nodes_per_pkg, num_cores_per_node, and num_threads_per_node. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: rename num_cores_per_pkg to num_cores_per_nodePrarit Bhargava
turbostat incorrectly assumes that there is one node per package. As a result num_cores_per_pkg is not correctly named and is actually num_cores_per_node. Rename num_cores_per_pkg to num_cores_per_node. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: track thread ID in cpu_topologyPrarit Bhargava
The code can be simplified if the cpu_topology *cpus tracks the thread IDs. This removes an additional file lookup and simplifies the counter initialization code. Add thread ID to cpu_topology information and cleanup the counter initialization code. v2: prevent thread_id from being overwritten Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Calculate additional node information for a packagePrarit Bhargava
The code currently assumes each package has exactly one node. This is not the case for AMD systems and Intel systems with COD. AMD systems also may re-enumerate each node's core IDs starting at 0 (for example, an AMD processor may have two nodes, each with core IDs from 0 to 7). In order to properly enumerate the cores we need to track both the physical and logical node IDs. Add physical_node_id to track the node ID assigned by the kernel, and logical_node_id used by turbostat to track the nodes per package ie) a 0-based count within the package. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Fix node and siblings lookup dataLen Brown
The turbostat code only looks at thread_siblings_list to determine if processing units/threads are on the same the core. This works well on Intel systems which have a shared L1 instruction and data cache. This does not work on AMD systems which have shared L1 instruction cache but separate L1 data caches. Other utilities also check sibling's core ID to determine if the processing unit shares the same core. Additionally, the cpu_topology *cpus list used in topology_probe() can be used elsewhere in the code to simplify things. Export *cpus to the entire turbostat code, and add Processing Unit/Thread IDs information to each cpu_topology struct. Confirm that the thread is on the same core as indicated by thread_siblings_list. [v2]: Fixup CPU_* usage that caused gcc malloc error. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: set max_num_cpus equal to the cpumask lengthPrarit Bhargava
Future fixes will use sysfs files that contain cpumask output. The code needs to know the length of the cpumask in order to determine which cpus are set in a cpumask. Currently topo.max_cpu_num is the maximum cpu number. It can be increased the the maximum value of cpus represented in cpumasks. Set max_num_cpus to the length of a cpumask. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: if --num_iterations, print for specific number of ↵Chen Yu
iterations There's a use case during test to only print specific round of iterations if --num_iterations is specified, for example, with this patch applied: turbostat -i 5 -n 4 will capture 4 samples with 5 seconds interval. [lenb: renamed to --num_iterations from --iterations] Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Add Cannon Lake supportSrinivas Pandruvada
All MSRs related to turbostat are same as Kabylake. Even though SDM claims that core C3 residency can be read from MSR 0x662, the read on this MSR fails on CNL platform. Hence disabled C3 MSR read and display. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: delete duplicate #definesLen Brown
The SNB_C1_AUTO_UNDEMOTE definition should have been deleted once it was copied into msr-index.h. One copy of the truth is better -- particularly when Matt needs to fix it:-) Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE definesMatt Turner
According to the Intel Software Developers' Manual, Vol. 4, Order No. 335592, these macros have been reversed since they were added in the initial turbostat commit. The reversed definitions were presumably copied from turbostat.c to this file. Fixes: 9c63a650bb10 ("tools/power/x86/turbostat: share kernel MSR #defines") Signed-off-by: Matt Turner <mattst88@gmail.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE definesMatt Turner
According to the Intel Software Developers' Manual, Vol. 4, Order No. 335592, these macros have been reversed since they were added. Fixes: 889facbee3e6 ("tools/power turbostat: v3.0: monitor Watts and Temperature") Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: add POLL and POLL% columnLen Brown
Like the "C1" and "C1%" column, the new POLL and POLL% columns show invocations and residency% during the measurement interval. While it didn't seem important to track in the past, we've recently found some Linux cpuidle bugs related to POLL%. Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Fix --hide Pk%pc10Len Brown
The column header for PC10 residency is "Pk%pc10" This is missing the 'g' that others have, eg Pkg%pc6, to allow tab-delimited columns to fit into 8-columns. However, --hide Pk%pc10 did not work, it was still looking for the 'g'. This was confusing, because --list shows the correct "Pk%pc10" Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: Build-in "Low Power Idle" counters supportLen Brown
Linux 4.15 exports the ACPI Low Power Idle Table's counters in /sys/devices/system/cpu/cpuidle/ low_power_idle_cpu_residency_us Show this in the "CPU%LPI" column. Today this reflects the "North Complex" residency in PC10, so expect it to closely follow "Pk%pc10". low_power_idle_system_residency_us Show this in the "SYS%LPI" column. Today, this reflects the North is in PC10, plus the PCH is sufficiently quiescent to save additional power via the "S0ix" system state, as measured by the PCH SLP_S0 counter. Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01fs: use ->is_partially_uptodate in page_cache_seek_hole_dataChristoph Hellwig
This way the implementation doesn't depend on buffer_head internals. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01fs: remove the buffer_unwritten check in page_seek_hole_dataChristoph Hellwig
We only call into this function through the iomap iterators, so we already know the buffer is unwritten. In addition to that we always require the uptodate flag that is ORed with the result anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01fs: move page_cache_seek_hole_data to iomap.cChristoph Hellwig
This function is only used by the iomap code, depends on being called from it, and will soon stop poking into buffer head internals. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01xfs: use iomap_bmapChristoph Hellwig
Switch to the iomap based bmap implementation to get rid of one of the last users of xfs_get_blocks. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01iomap: add an iomap-based bmap implementationChristoph Hellwig
This adds a simple iomap-based implementation of the legacy ->bmap interface. Note that we can't easily add checks for rt or reflink files, so these will have to remain in the callers. This interface just needs to die.. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01iomap: add a iomap_sector helperChristoph Hellwig
Factor the repeated calculation of the on-disk sector for a given logical block into a littler helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01iomap: use __bio_add_page in iomap_dio_zeroChristoph Hellwig
We don't need any merging logic, and this also replaces a BUG_ON with a WARN_ON_ONCE inside __bio_add_page for the impossible overflow condition. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01iomap: move IOMAP_F_BOUNDARY to gfs2Christoph Hellwig
Just define a range of fs specific flags and use that in gfs2 instead of exposing this internal flag globally. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01iomap: fix the comment describing IOMAP_NOWAITChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01iomap: inline data should be an iomap type, not a flagChristoph Hellwig
Inline data is fundamentally different from our normal mapped case in that it doesn't even have a block address. So instead of having a flag for it it should be an entirely separate iomap range type. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01mm: split ->readpages calls to avoid non-contiguous pages listsChristoph Hellwig
That way file systems don't have to go spotting for non-contiguous pages and work around them. It also kicks off I/O earlier, allowing it to finish earlier and reduce latency. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01mm: return an unsigned int from __do_page_cache_readaheadChristoph Hellwig
We never return an error, so switch to returning an unsigned int. Most callers already did implicit casts to an unsigned type, and the one that didn't can be simplified now. Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01mm: give the 'ret' variable a better name __do_page_cache_readaheadChristoph Hellwig
It counts the number of pages acted on, so name it nr_pages to make that obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01block: add a lower-level bio_add_page interfaceChristoph Hellwig
For the upcoming removal of buffer heads in XFS we need to keep track of the number of outstanding writeback requests per page. For this we need to know if bio_add_page merged a region with the previous bvec or not. Instead of adding additional arguments this refactors bio_add_page to be implemented using three lower level helpers which users like XFS can use directly if they care about the merge decisions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01tools/power turbostat: Don't make man pages executableLaura Abbott
rpm-lint flagged these as being executable: kernel-tools.x86_64: W: spurious-executable-perm /usr/share/man/man8/turbostat.8.gz kernel-tools.x86_64: W: spurious-executable-perm /usr/share/man/man8/x86_energy_perf_policy.8.gz Fix this Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: remove blank linesLen Brown
When the user reuests to collect and show columns that are not present on every row (eg. for every CPU) turbostat still prints an (empty) line for every CPU. Update so no blank lines are printed. old: # turbostat --quiet --show Pkg%pc6 Pkg%pc6 9.12 9.12 Pkg%pc6 9.12 9.12 new: # turbostat --quiet --show Pkg%pc6 Pkg%pc6 9.12 9.12 Pkg%pc6 9.12 9.12 Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: a small C-states dump readability immprovementArtem Bityutskiy
Improve readability a little bit by changing this output: MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked: pkg-cstate-limit=7: unlimited, automatic-c-state-conversion=off) with this output: MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked, pkg-cstate-limit=7 (unlimited), automatic-c-state-conversion=off) Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: dump BDX, SKX automatic C-state conversion bitArtem Bityutskiy
BDX and SKX have a bit that tells them to PROMOTE shallow C-states requests to MWAIT(C6). It is generally a BIOS bug if this bit is set. As we have encountered that BIOS bug, let's print this bit in turbostat debug output. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: do not hard-code 25MHz crystal on SKXLen Brown
Some SKX use a 24 MHz crystal, so do not hard code 25 MHz. Also, SKX crystal is not exact, because SKX uses an EMI reduction circuit that costs a fraction of a percent. Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01tools/power turbostat: fix possible sprintf buffer overflowLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-01Merge tag 'irqchip-4.18' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 4.18 from Marc Zyngier: - Support for Meson-AXG GPIO irqchip - Large stm32 irqchip rework (suspend/resume, hierarchical domains)
2018-06-01perf tools intel-pt-decoder: Update insn.h from the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: ee6a7354a362 ("kprobes/x86: Prohibit probing on exception masking instructions") That doesn't entail changes in tooling, but silences this perf build warning: Warning: Intel PT: x86 instruction decoder header at 'tools/perf/util/intel-pt-decoder/insn.h' differs from latest version at 'arch/x86/include/asm/insn.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-o3wfwjnyh7r8l0gi9q3y9f44@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-01tools headers: Sync x86 cpufeatures.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up changes found in these csets: 11fb0683493b x86/speculation: Add virtualized speculative store bypass disable support d1035d971829 x86/cpufeatures: Add FEATURE_ZEN 52817587e706 x86/cpufeatures: Disentangle SSBD enumeration 7eb8956a7fec x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS e7c587da1252 x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP 9f65fb29374e x86/bugs: Rename _RDS to _SSBD 764f3c21588a x86/bugs/AMD: Add support to disable RDS on Fam[15,16,17]h if requested 24f7fc83b920 x86/bugs: Provide boot parameters for the spec_store_bypass_disable mitigation 0cc5fa00b0a8 x86/cpufeatures: Add X86_FEATURE_RDS c456442cd3a5 x86/bugs: Expose /sys/../spec_store_bypass The usage of this file in tools doesn't use the newly added X86_FEATURE_ defines: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o LD /tmp/build/perf/bench/perf-in.o LD /tmp/build/perf/perf-in.o Silencing this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-mrwyauyov8c7s048abg26khg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-01tools headers: Synchronize prctl.h ABI headerArnaldo Carvalho de Melo
To pick up changes from: $ git log --oneline -2 -i include/uapi/linux/prctl.h 356e4bfff2c5 prctl: Add force disable speculation b617cfc85816 prctl: Add speculation control prctls $ tools/perf/trace/beauty/prctl_option.sh > before.c $ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h $ tools/perf/trace/beauty/prctl_option.sh > after.c $ diff -u before.c after.c --- before.c 2018-06-01 10:39:53.834073962 -0300 +++ after.c 2018-06-01 10:42:11.307985394 -0300 @@ -35,6 +35,8 @@ [42] = "GET_THP_DISABLE", [45] = "SET_FP_MODE", [46] = "GET_FP_MODE", + [52] = "GET_SPECULATION_CTRL", + [53] = "SET_SPECULATION_CTRL", }; static const char *prctl_set_mm_options[] = { [1] = "START_CODE", $ This will be used by 'perf trace' to show these strings when beautifying the prctl syscall args. At some point we'll be able to say something like: 'perf trace --all-cpus -e prctl(option=*SPEC*)' To filter by arg by name. This silences this warning when building tools/perf: Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zztsptwhc264r8wg44tqh5gp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-01perf trace beauty prctl: Default header_dir to cwd to work without parmsArnaldo Carvalho de Melo
Useful when checking the effects of header synchs for the files it uses as a input to generate string tables, in retrospect this is how it should've been done from day 1, not requiring the header_dir to be set on the Makefile, will change everything later, so that the only parm, common to all generators will be $(srctree) and $(beauty_outdir). So, to see what it generates, just call it without any parameters: $ tools/perf/trace/beauty/prctl_option.sh static const char *prctl_options[] = { [1] = "SET_PDEATHSIG", [2] = "GET_PDEATHSIG", [3] = "GET_DUMPABLE", [4] = "SET_DUMPABLE", [5] = "GET_UNALIGN", [6] = "SET_UNALIGN", [7] = "GET_KEEPCAPS", [8] = "SET_KEEPCAPS", [9] = "GET_FPEMU", [10] = "SET_FPEMU", [11] = "GET_FPEXC", [12] = "SET_FPEXC", [13] = "GET_TIMING", [14] = "SET_TIMING", [15] = "SET_NAME", [16] = "GET_NAME", [19] = "GET_ENDIAN", [20] = "SET_ENDIAN", [21] = "GET_SECCOMP", [22] = "SET_SECCOMP", [25] = "GET_TSC", [26] = "SET_TSC", [27] = "GET_SECUREBITS", [28] = "SET_SECUREBITS", [29] = "SET_TIMERSLACK", [30] = "GET_TIMERSLACK", [35] = "SET_MM", [36] = "SET_CHILD_SUBREAPER", [37] = "GET_CHILD_SUBREAPER", [38] = "SET_NO_NEW_PRIVS", [39] = "GET_NO_NEW_PRIVS", [40] = "GET_TID_ADDRESS", [41] = "SET_THP_DISABLE", [42] = "GET_THP_DISABLE", [45] = "SET_FP_MODE", [46] = "GET_FP_MODE", }; static const char *prctl_set_mm_options[] = { [1] = "START_CODE", [2] = "END_CODE", [3] = "START_DATA", [4] = "END_DATA", [5] = "START_STACK", [6] = "START_BRK", [7] = "BRK", [8] = "ARG_START", [9] = "ARG_END", [10] = "ENV_START", [11] = "ENV_END", [12] = "AUXV", [13] = "EXE_FILE", [14] = "MAP", [15] = "MAP_SIZE", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-qtotspuztydjttxi7k6mec6h@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-01net: usb: cdc_mbim: add flag FLAG_SEND_ZLPDaniele Palmas
Testing Telit LM940 with ICMP packets > 14552 bytes revealed that the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc mbim data interface won't be anymore responsive. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01Merge branch 'tunnel-mtus'David S. Miller
Nicolas Dichtel says: ==================== ip[6] tunnels: fix mtu calculations The first patch restores the possibility to bind an ip4 tunnel to an interface whith a large mtu. The second patch was spotted after the first fix. I also target it to net because it fixes the max mtu value that can be used for ipv6 tunnels. v2: remove the 0xfff8 in ip_tunnel_newlink() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01ip6_tunnel: remove magic mtu value 0xFFF8Nicolas Dichtel
I don't know where this value comes from (probably a copy and paste and paste and paste ...). Let's use standard values which are a bit greater. Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411a Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01ip_tunnel: restore binding to ifaces with a large mtuNicolas Dichtel
After commit f6cc9c054e77, the following conf is broken (note that the default loopback mtu is 65536, ie IP_MAX_MTU + 1): $ ip tunnel add gre1 mode gre local 10.125.0.1 remote 10.125.0.2 dev lo add tunnel "gre0" failed: Invalid argument $ ip l a type dummy $ ip l s dummy1 up $ ip l s dummy1 mtu 65535 $ ip tunnel add gre1 mode gre local 10.125.0.1 remote 10.125.0.2 dev dummy1 add tunnel "gre0" failed: Invalid argument dev_set_mtu() doesn't allow to set a mtu which is too large. First, let's cap the mtu returned by ip_tunnel_bind_dev(). Second, remove the magic value 0xFFF8 and use IP_MAX_MTU instead. 0xFFF8 seems to be there for ages, I don't know why this value was used. With a recent kernel, it's also possible to set a mtu > IP_MAX_MTU: $ ip l s dummy1 mtu 66000 After that patch, it's also possible to bind an ip tunnel on that kind of interface. CC: Petr Machata <petrm@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411a Fixes: f6cc9c054e77 ("ip_tunnel: Emit events for post-register MTU changes") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-05-31 1) Avoid possible overflow of the offset variable in _decode_session6(), this fixes an infinite lookp there. From Eric Dumazet. 2) We may use an error pointer in the error path of xfrm_bundle_create(). Fix this by returning this pointer directly to the caller. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01ASoC: topology: Move skl-tplg-interface.h to uapiGuenter Roeck
skl-tplg-interface.h describes firmware format details for Skylake topology files. It is part of the ABI and should reside in the uapi directory. While moving the file, also replace the license boilerplate with the SPDX License Identifier. No functional change. Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-18 12:01:45 +0000