| Age | Commit message (Collapse) | Author |
|---|
|
Topology manifest v4 is still part of the ABI. Move its data structures
into the uapi header file.
No functional change.
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit dc31e741db49 ("ASoC: topology: ABI - Add the types for BE
DAI") introduced sound topology files version 5. Initially, this
change made the topology code incompatible with v4 topology files.
Backwards compatibility with v4 configuration files was
subsequently added with commit 288b8da7e992 ("ASoC: topology:
Support topology file of ABI v4").
Unfortunately, backwards compatibility was never fully implemented.
First, the manifest size in (Skylake) v4 configuration files is set
to 0, which causes manifest_new_ver() to bail out with error messages
similar to the following.
snd_soc_skl 0000:00:1f.3: ASoC: invalid manifest size
snd_soc_skl 0000:00:1f.3: tplg component load failed-22
snd_soc_skl 0000:00:1f.3: Failed to init topology!
snd_soc_skl 0000:00:1f.3: ASoC: failed to probe component -22
skl_n88l25_m98357a skl_n88l25_m98357a: ASoC: failed to instantiate card -22
skl_n88l25_m98357a: probe of skl_n88l25_m98357a failed with error -22
After this problem is fixed, the following error message is seen instead.
snd_soc_skl 0000:00:1f.3: ASoC: old version of manifest
snd_soc_skl 0000:00:1f.3: Invalid descriptor token 1093938482
snd_soc_skl 0000:00:1f.3: ASoC: failed to load widget media0_in cpr 0
snd_soc_skl 0000:00:1f.3: tPlg component load failed-22
This message is seen because backwards compatibility for loading widgets
was never implemented.
The lack of audio support when running the upstream kernel on recent
Chromebooks has been reported in various forums, and can be traced back
to this problem. Attempts to fix the problem, usually by providing v5
configuration files, were only partially successful.
Let's implement backward compatibility properly to solve the problem
for good.
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use devm_* variants of kstrdup and kzalloc. Get rid of kfree cleanups.
Signed-off-by: Bastian Germann <bastiangermann@fishpost.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Make the asus_atk0110 driver use hwmon_device_register_with_groups instead
of the deprecated hwmon_device_register.
Construct the expected attribute_group array from the sensor list which
contains all needed attributes.
Remove the manual sysfs file creation and deletion that are now taken care
of by the (un)register calls via the attribute_group array.
Signed-off-by: Bastian Germann <bastiangermann@fishpost.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
MSR_IA32_MISC_ENABLE[18] is the MWAIT ENABLE bit, not DISABLE bit...
so
MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST No-MWAIT PREFETCH TURBO)
should print as:
MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT PREFETCH TURBO)
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The recent patch that implements table printing on a keypress introduced a
regression - turbostat prints the table almost continuously if it is run from a
daemon program.
The problem is also easy to reproduce like this:
echo | turbostat
The reason is that we cannot assume that stdin is always a TTY. It can be many
things.
This patch adds fixes the problem by limiting the new keypress functionality to
TTYs only. If stdin is not a TTY, we just sleep for the full interval time.
While on it, clean-up 'do_sleep()' to return no value, as callers do not expect
that anyway.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
In turbostat interval mode, a newline typed on standard input
will now conclude the current interval. Data will immediately
be collected and printed for that interval, and the next interval
will be started.
This is similar to the recently added SIGUSR1 feature.
But that is for use by programs, while this is for interactive use.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Interval-mode turbostat now catches and discards SIGUSR1.
Thus, SIGUSR1 can be used to tell turbostat to cut short
the current measurement interval. Turbostat will then start
the next measurement interval using the regular interval length.
This can be used to give turbostat variable intervals.
Invoke turbostat with --interval LARGE_NUMBER_SEC
and have a program that has permission to send it a SIGUSR1
always before LARGE_NUMBER_SEC expires.
It may also be useful to use "--enable Time_Of_Day_Seconds"
to observe the actual interval length.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When running in interval-mode, catch interrupts
and print a final data record before exiting.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add a Time_Of_Day_Seconds column showing when measurement
for each row was completed. Units are [sec.subsec] since Epoch,
as reported by gettimeofday(2).
While useful to correlate turbostat output with other tools,
this built-in column is disabled, by default.
Add the "--enable" option to enable such disabled-by-default
built-in columns:
"--enable Time_Of_Day_Seconds"
"--enable usec"
"--enable all", will enable all disabled-by-defauilt built-in counters.
When "--debug" is used, all disabled-by-default columns are enabled,
unless explicitly skipped using "--hide"
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Turbostat neglects to display all package C-states for some Skylake Xeon BIOS configurations.
This is due to a typo in the table decoding MSR_PKG_CST_CONFIG_CONTROL (0x000000e2)
Here we fix that typo, according to Intel SDM, vol 4, Table 2-41 -
"MSRs Supported by Intel® Xeon® Processor Scalable Family with DisplayFamily_DisplayModel 06_55H".
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
generic/475 fired an assert failure just after the filesystem was
shut down:
XFS: Assertion failed: fs_is_ok, file: fs/xfs/libxfs/xfs_refcount.c, line: 182
.....
Call Trace:
xfs_refcount_insert+0x151/0x190
xfs_refcount_adjust_extents.constprop.11+0x9c/0x470
xfs_refcount_adjust.constprop.10+0xb0/0x270
xfs_refcount_finish_one+0x25a/0x420
xfs_trans_log_finish_refcount_update+0x2a/0x40
xfs_refcount_update_finish_item+0x35/0xa0
xfs_defer_finish+0x15e/0x4d0
xfs_reflink_remap_extent+0x1bc/0x610
xfs_reflink_remap_blocks+0x6e/0x280
xfs_reflink_remap_range+0x311/0x530
vfs_clone_file_range+0x119/0x200
....
If xfs_btree_insert() returns an error, the corruption check fires
instead of passing the error back the caller. The corruption check
should be after we've checked for an error, not before, thereby
avoiding assert failures if the filesystem shuts down during a
refcount btree record insert.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
All the realtime allocation functions deal with space on the rtdev in
units of realtime extents. However, struct xfs_rtalloc_rec confusingly
uses the word 'block' in the name, even though they're really extents.
Fix the naming problem and fix all the unit handling problems in the two
existing users.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
|
|
Strengthen the rtalloc range query checks to make sure that the keys do
not run off the end of the realtime device inappropriately. Note that
the query range functions require units of rt extents, not blocks,
despite the type name.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
|
|
The xfs_rtbuf_get function should check the block mapping it gets back
from bmapi_read. If there are no mappings or the mapping isn't a real
extent, we should return -EFSCORRUPTED rather than trying to read a
garbage value. We also require realtime bitmap blocks to be real,
written allocations.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
|
|
xfs_rtword_t is used for bit manipulations in the realtime bitmap file.
Since we're performing bit shifts with this type, we don't want sign
extension and we don't want to be left shifting negative quantities
because that's undefined behavior.
This also shuts up these UBSAN warnings:
UBSAN: Undefined behaviour in fs/xfs/libxfs/xfs_rtbitmap.c:833:48
signed integer overflow:
-2147483648 - 1 cannot be represented in type 'int'
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
|
|
The function get_raw_temp is local to the source and does not need to
be in global scope, so make it static.
Cleans up sparse warning:
drivers/hwmon/k10temp.c:149:14: warning: symbol 'get_raw_temp' was not
declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
sound/pci/hda/local.h seems to be an earlier version of
sound/hda/local.h; it was added at the same time but doesn't seem to
have ever been used (within the git history). Most of its macros
depend on a hdac_read_parm() function which is not defined anywhere.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch adds support for the BCM5389 switch connected through MDIO.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pblk allocates line bitmaps within the line lock unnecessarily. In order
to take pressure out of the fast patch, allocate line bitmaps outside
of this lock and refactor accordingly.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unless we kick the writer directly when setting a new flush point, the
user risks having to wait for up to one second (the default timeout for
the write thread to be kicked) for the IO to complete.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When switching between different lun configurations, there is no
guarantee that all lines that contain closed/open chunks have some
valid data to recover.
Check that the smeta chunk has been written to instead. Also
skip bad lines (that does not have enough good chunks).
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the read path, pblk gets a reference to the incoming bio and puts it
after ending the bio. Though this behavior is correct, it is unnecessary
since pblk is the one putting the bio, therefore, it cannot disappear
underneath it.
Removing this reference, allows to clean up rqd->bio and avoids pointer
bouncing for the different read paths. Now, the incoming bio always
resides in the read context and pblk's internal bios (if any) reside in
rqd->bio.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In some cases, users can want set write buffer size manually, e.g. to
adjust it to specific workload. This patch provides the possibility
to set write buffer size via module parameter feature.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When error occurs during bio_add_page on partial read path, pblk
tries to free pages twice.
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently in case of error caused by bio_pc_add_page in
pblk_bio_add_pages two issues occur when calling from
pblk_rb_read_to_bio(). First one is in pblk_bio_free_pages, since we
are trying to free pages not allocated from our mempool. Second one
is the warn from dma_pool_free, that we are trying to free NULL
pointer dma.
This commit fix both issues.
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Smeta write errors were previously ignored. Skip these
lines instead and throw them back on the free
list, so the chunks will go through a reset cycle
before we attempt to use the line again.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Write failures should not happen under normal circumstances,
so in order to bring the chunk back into a known state as soon
as possible, evacuate all the valid data out of the line and let the
fw judge if the block can be written to in the next reset cycle.
Do this by introducing a new gc list for lines with failed writes,
and ensure that the rate limiter allocates a small portion of
the write bandwidth to get the job done.
The lba list is saved in memory for use during gc as we
cannot gurantee that the emeta data is readable if a write
error occurred.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The write error recovery path is incomplete, so rework
the write error recovery handling to do resubmits directly
from the write buffer.
When a write error occurs, the remaining sectors in the chunk are
mapped out and invalidated and the request inserted in a resubmit list.
The writer thread checks if there are any requests to resubmit,
scans and invalidates any lbas that have been overwritten by later
writes and resubmits the failed entries.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
(resend for properly queueing in patchwork)
kcm_clone() creates kernel socket, which does not take net counter.
Thus, the net may die before the socket is completely destructed,
i.e. kcm_exit_net() is executed before kcm_done().
Reported-by: syzbot+5f1a04e374a635efc426@syzkaller.appspotmail.com
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since header_preamble_size is 0 for SMB2+ we can remove it in those
code paths that are only invoked from SMB2.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
struct smb2_hdr is now just a wrapper for smb2_sync_hdr.
We can thus get rid of smb2_hdr completely and access the sync header directly.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
expiry, status STATUS_NETWORK_SESSION_EXPIRED, however the server can also respond with STATUS_USER_SESSION_DELETED in cases where the session has been idle for some time and the server reaps the session to recover resources.
Handle this additional status in the same way as SESSION_EXPIRED.
Signed-off-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
|
|
Remove dead function for manual sync. I/O
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the namespace is unregistered before the LightNVM target is removed
(e.g., on hot unplug) it is too late for the target to store any metadata
on the device - any attempt to write to the device will fail. In this
case, pass on a "gracefull teardown" flag to the target to let it know
when this happens.
In the case of pblk, we pad the open line (close all open chunks) to
improve data retention. In the event of an ungraceful shutdown, avoid
this part and just clean up.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Do the check for the chunk state after making sure that the chunk type
is supported.
Fixes: 32ef9412c114 ("lightnvm: pblk: implement get log report chunk")
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove unnecessary argument on pblk_line_free()
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Call nvm_submit_io directly and remove an unnecessary indirection on the
read path.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Return a meaningful error when the sanity vector I/O check fails.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When cleaning up buffer entries as we wrap up, their state should be
"completed". If any of the entries is in "submitted" state, it means
that something bad has happened. Trigger a warning immediately instead of
waiting for the state flag to eventually be updated, thus hiding the
issue.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the event of a mismatch between the read LBA and the metadata pointer
reported by the device, improve the error message to be able to detect
the offending physical address (PPA) mapped to the corrupted LBA.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Check that the lba stored in the LBA metadata is correct in the GC path
too. This requires a new helper function to check random reads in the
vector read.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bad blocks can grow at runtime. Check that the number of valid blocks in
a line are within the sanity threshold before allocating the line for
new writes.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the event of a line failing to allocate, fail gracefully and stop the
pipeline to avoid more write failing in the same place.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe changes from Christoph:
"Below is another set of NVMe updates for 4.18. Besides the usual bug
fixes this includes more feature completness in terms of AEN and log
page handling on the target."
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvme: use the changed namespaces list log to clear ns data changed AENs
nvme: mark nvme_queue_scan static
nvme: submit AEN event configuration on startup
nvmet: mask pending AENs
nvmet: add AEN configuration support
nvmet: implement the changed namespaces log
nvmet: split log page implementation
nvmet: add a new nvmet_zero_sgl helper
nvme.h: add AEN configuration symbols
nvme.h: add the changed namespace list log
nvme.h: untangle AEN notice definitions
nvmet: fix error return code in nvmet_file_ns_enable()
nvmet: fix a typo in nvmet_file_ns_enable()
nvme-fabrics: allow internal passthrough command on deleting controllers
nvme-loop: add support for multiple ports
nvme-pci: simplify __nvme_submit_cmd
nvme-pci: Rate limit the nvme timeout warnings
nvme: allow duplicate controller if prior controller being deleted
|
|
There is almost no shared logic, which leads to a very confusing code
flow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Both callers take just around so function call, so move it in.
Also remove the now pointless blk_mq_sched_init wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These are only used by the block core. Also move the declarations to
block/blk.h.
Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
