| Age | Commit message (Collapse) | Author |
|---|
|
As unlock_up() is written as
for () {
if (!path->locks[i])
break;
...
if (... && path->locks[i]) {
}
}
Apparently, @path->locks[i] is always true at this 'if'.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Typically, when acquiring root node's lock, btrfs tries its best to get
read lock and trade for write lock if @write_lock_level implies to do so.
In case of (cow && (p->keep_locks || p->lowest_level)), write_lock_level
is set to BTRFS_MAX_LEVEL, which means we need to acquire root node's
write lock directly.
In this particular case, the dance of acquiring read lock and then trading
for write lock can be saved.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's good to have a helper instead of having all get-root details
open-coded. The new helper locks (if necessary) and sets root node of
the path.
Also invert the checks to make the code flow easier to read. There is
no functional change in this commit.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If parent_transid "0" is passed to btrfs_buffer_uptodate(),
btrfs_buffer_uptodate() is equivalent to extent_buffer_uptodate(), but
extent_buffer_uptodate() is preferred since we don't have to look into
verify_parent_transid().
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
read_block_for_search() can be simplified as:
tmp = find_extent_buffer();
if (tmp)
return;
...
free_extent_buffer();
read_tree_block();
Apparently, @tmp must be NULL at this point, free_extent_buffer() is not
needed.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit dc2d3005d27d ("btrfs: remove dead create_space_info
calls"), there is only one caller btrfs_init_space_info. However, it
doesn't need create_space_info to return space_info at all.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As verify_level_key() is checked after verify_parent_transid(), i.e.
if (verify_parent_transid())
ret = -EIO;
else if (verify_level_key())
ret = -EUCLEAN;
if parent_transid is 0, verify_parent_transid() skips verifying
parent_transid and considers eb as valid, and if verify_level_key()
reports something wrong, we're not going to know if it's caused by
corrupted metadata or non-checkecd eb (e.g. stale eb).
The stale eb can be from an outdated raid1 mirror after a degraded
mount, see eg "btrfs: fix reading stale metadata blocks after degraded
raid1 mounts" (02a3307aa9c20b4f66262) for more details.
@parent_transid is able to tell whether the eb's generation has been
verified by the caller.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Error message from qgroup_rescan_init() mostly looks like:
BTRFS info (device nvme0n1p1): qgroup_rescan_init failed with -115
Which is far from meaningful, and sometimes confusing as for above
-EINPROGRESS it's mostly (despite the init race) harmless, but sometimes
it can also indicate problem if the return value is -EINVAL.
Change it to some more meaningful messages like:
BTRFS info (device nvme0n1p1): qgroup rescan is already in progress
And
BTRFS err(device nvme0n1p1): qgroup rescan init failed, qgroup is not enabled
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update the messages and level ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we have invalid flags set, when we error out we must drop our writer
counter and free the buffer we allocated for the arguments. This bug is
trivially reproduced with the following program on 4.7+:
#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <linux/btrfs.h>
#include <linux/btrfs_tree.h>
int main(int argc, char **argv)
{
struct btrfs_ioctl_vol_args_v2 vol_args = {
.flags = UINT64_MAX,
};
int ret;
int fd;
if (argc != 2) {
fprintf(stderr, "usage: %s PATH\n", argv[0]);
return EXIT_FAILURE;
}
fd = open(argv[1], O_WRONLY);
if (fd == -1) {
perror("open");
return EXIT_FAILURE;
}
ret = ioctl(fd, BTRFS_IOC_RM_DEV_V2, &vol_args);
if (ret == -1)
perror("ioctl");
close(fd);
return EXIT_SUCCESS;
}
When unmounting the filesystem, we'll hit the
WARN_ON(mnt_get_writers(mnt)) in cleanup_mnt() and also may prevent the
filesystem to be remounted read-only as the writer count will stay
lifted.
Fixes: 6b526ed70cf1 ("btrfs: introduce device delete by devid")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For inlined extent, we only have one segment, thus less things to check.
And further more, inlined extent always has the csum in its leaf header,
it's less probable to have corrupted data.
Anyway, still check header and segment header.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
James Harvey reported that some corrupted compressed extent data can
lead to various kernel memory corruption.
Such corrupted extent data belongs to inode with NODATASUM flags, thus
data csum won't help us detecting such bug.
If lucky enough, KASAN could catch it like:
BUG: KASAN: slab-out-of-bounds in lzo_decompress_bio+0x384/0x7a0 [btrfs]
Write of size 4096 at addr ffff8800606cb0f8 by task kworker/u16:0/2338
CPU: 3 PID: 2338 Comm: kworker/u16:0 Tainted: G O 4.17.0-rc5-custom+ #50
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Workqueue: btrfs-endio btrfs_endio_helper [btrfs]
Call Trace:
dump_stack+0xc2/0x16b
print_address_description+0x6a/0x270
kasan_report+0x260/0x380
memcpy+0x34/0x50
lzo_decompress_bio+0x384/0x7a0 [btrfs]
end_compressed_bio_read+0x99f/0x10b0 [btrfs]
bio_endio+0x32e/0x640
normal_work_helper+0x15a/0xea0 [btrfs]
process_one_work+0x7e3/0x1470
worker_thread+0x1b0/0x1170
kthread+0x2db/0x390
ret_from_fork+0x22/0x40
...
The offending compressed data has the following info:
Header: length 32768 (looks completely valid)
Segment 0 Header: length 3472882419 (obviously out of bounds)
Then when handling segment 0, since it's over the current page, we need
the copy the compressed data to temporary buffer in workspace, then such
large size would trigger out-of-bounds memory access, screwing up the
whole kernel.
Fix it by adding extra checks on header and segment headers to ensure we
won't access out-of-bounds, and even checks the decompressed data won't
be out-of-bounds.
Reported-by: James Harvey <jamespharvey20@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The "perf test Session topology" entry fails with core dump on s390. The root
cause is a NULL pointer dereference in function check_cpu_topology() line 76
(or line 82 without -v).
The session->header.env.cpu variable is NULL because on s390 function
process_cpu_topology() returns with error:
socket_id number is too big.
You may need to upgrade the perf tool.
and releases the env.cpu variable via zfree() and sets it to NULL.
Here is the gdb output:
(gdb) n
76 pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb) n
Program received signal SIGSEGV, Segmentation fault.
0x00000000010f4d9e in check_cpu_topology (path=0x3ffffffd6c8
"/tmp/perf-test-J6CHMa", map=0x14a1740) at tests/topology.c:76
76 pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb)
Make sure the env.cpu variable is not used when its NULL.
Test for NULL pointer and return TEST_SKIP if so.
Output before:
[root@p23lp27 perf]# ./perf test -F 39
39: Session topology :Segmentation fault (core dumped)
[root@p23lp27 perf]#
Output after:
[root@p23lp27 perf]# ./perf test -vF 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-Ajx59D
socket_id number is too big.You may need to upgrade the perf tool.
---- end ----
Session topology: Skip
[root@p23lp27 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180528073657.11743-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Perf stat doesn't count the uncore event aliases from the same uncore
block in a group, for example:
perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000
# time counts unit events
1.000447342 <not counted> unc_m_cas_count.all
1.000447342 <not counted> unc_m_clockticks
2.000740654 <not counted> unc_m_cas_count.all
2.000740654 <not counted> unc_m_clockticks
The output is very misleading. It gives a wrong impression that the
uncore event doesn't work.
An uncore block could be composed by several PMUs. An uncore event alias
is a joint name which means the same event runs on all PMUs of a block.
Perf doesn't support mixed events from different PMUs in the same group.
It is wrong to put uncore event aliases in a big group.
The right way is to split the big group into multiple small groups which
only include the events from the same PMU.
Only uncore event aliases from the same uncore block should be specially
handled here. It doesn't make sense to mix the uncore events with other
uncore events from different blocks or even core events in a group.
With the patch:
# time counts unit events
1.001557653 140,833 unc_m_cas_count.all
1.001557653 1,330,231,332 unc_m_clockticks
2.002709483 85,007 unc_m_cas_count.all
2.002709483 1,429,494,563 unc_m_clockticks
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To be consistent with code in other mmc host drivers, convert to check the
correct PM config #ifdef in favor of using __maybe_unused.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To be consistent with code in other mmc host drivers, convert to check the
correct PM config #ifdef in favor of using __maybe_unused.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The in-parameter struct generic_pm_domain *genpd to
genpd_allocate_dev_data() is unused, so let's drop it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is no need to pass a genpd struct to pm_genpd_remove_device(), as we
already have the information about the PM domain (genpd) through the device
structure.
Additionally, we don't allow to remove a PM domain from a device, other
than the one it may have assigned to it, so really it does not make sense
to have a separate in-param for it.
For these reason, drop it and update the current only call to
pm_genpd_remove_device() from amdgpu_acp.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are still a few non-DT existing users of genpd, however neither of
them uses __pm_genpd_add_device(), hence let's drop it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Using "extern" to declare a function in a public header file is somewhat
pointless, but also doesn't hurt. However, to make all the function
declarations in pm_domain.h to be consistent, let's drop the use of
"extern".
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
Now that genpd supports performance states, add this additional
attribute as part of the power domains debugfs entry, to display
the current performance state for the Power domain.
Suggested-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
kfree() doesn't accept error pointers so I've set "str" to NULL on these
paths.
Fixes: fd3b36045c2c ("ALSA: xen-front: Read sound driver configuration from Xen store")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp
Pull more OPP updates for v4.18 from Viresh Kumar.
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Allow same OPP table to be used for multiple genpd
PM / OPP: Fix shared OPP table support in dev_pm_opp_register_set_opp_helper()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_regulators()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_prop_name()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_supported_hw()
|
|
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.
This change adds documentation for the DT bindings.
The "operating-points-v2-kryo-cpu" DT extends the "operating-points-v2"
with following parameters:
- nvmem-cells (NVMEM area containig the speedbin information)
- opp-supported-hw: A single 32 bit bitmap value,
representing compatible HW:
0: MSM8996 V3, speedbin 0
1: MSM8996 V3, speedbin 1
2: MSM8996 V3, speedbin 2
3: unused
4: MSM8996 SG, speedbin 0
5: MSM8996 SG, speedbin 1
6: MSM8996 SG, speedbin 2
7-31: unused
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
the CPU frequency subset and voltage value of each OPP varies
based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
defines the voltage and frequency value based on the msm-id in SMEM
and speedbin blown in the efuse combination.
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In asynchronous mode, a RxFS and RxClk connection needs to be made between
two ports. Add a define for the bit to be set in the *SEL fields.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[m.felsch@pengutronix.de: fixed comment to include i.MX21 and 35]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All conditionally-defined routines in include/sound/soc.h expose a
static inline fallback to avoid 0-day warnings and compilation issues,
except snd_soc_new_compress().
Fixes: 5db6aab6f36f ('ASoC: topology: Add support for compressed PCMs')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The OPP binding says:
Property: operating-points-v2
...
This can contain more than one phandle for power domain
providers that provide multiple power domains. That is, one
phandle for each power domain. If only one phandle is available,
then the same OPP table will be used for all power domains
provided by the power domain provider.
But the OPP core isn't allowing the same OPP table to be used for
multiple domains. Update dev_pm_opp_of_add_table_indexed() to allow
that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
|
|
Tests showed, that the zcrypt device driver produces memory
leaks when a valid CCA or EP11 CPRB can't get delivered or has
a failure during processing within the zcrypt device driver.
This happens when a invalid domain or adapter number is used
or the lower level software or hardware layers produce any
kind of failure during processing of the request.
Only CPRBs send to CCA or EP11 cards can produce this memory
leak. The accelerator and the CPRBs processed by this type
of crypto card is not affected.
The two fields message and private within the ap_message struct
are allocated with pulling the function code for the CPRB but
only freed when processing of the CPRB succeeds. So for example
an invalid domain or adapter field causes the processing to
fail, leaving these two memory areas allocated forever.
Signed-off-by: Harald Freudenberger <freude@de.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The arch_get_random_seed_long() invocation done by the random device
driver is done in interrupt context and may be invoked very very
frequently. The existing s390 arch_get_random_seed*() implementation
uses the PRNO(TRNG) instruction which produces excellent high quality
entropy but is relatively slow and thus expensive.
This fix reworks the arch_get_random_seed* implementation. It
introduces a buffer concept to decouple the delivery of random data
via arch_get_random_seed*() from the generation of new random
bytes. The buffer of random data is filled asynchronously by a
workqueue thread.
If there are enough bytes in the buffer the s390_arch_random_generate()
just delivers these bytes. Otherwise false is returned until the worker
thread refills the buffer.
The worker fills the rng buffer by pulling fresh entropy from the
high quality (but slow) true hardware random generator. This entropy
is then spread over the buffer with an pseudo random generator.
As the arch_get_random_seed_long() fetches 8 bytes and the calling
function add_interrupt_randomness() counts this as 1 bit entropy the
distribution needs to make sure there is in fact 1 bit entropy
contained in 8 bytes of the buffer. The current values pull 32 byte
entropy and scatter this into a 2048 byte buffer. So 8 byte in the
buffer will contain 1 bit of entropy.
The worker thread is rescheduled based on the charge level of the
buffer but at least with 500 ms delay to avoid too much cpu consumption.
So the max. amount of rng data delivered via arch_get_random_seed is
limited to 4Kb per second.
Signed-off-by: Harald Freudenberger <freude@de.ibm.com>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
s390 hardware supports the definition of a so-call Physical NETwork
IDentifier (short PNETID) per network device port. These PNETIDS
can be used to identify network devices that are attached to the same
physical network (broadcast domain).
This patch provides the interface to extract the PNETID of a port of
a device attached to the ccw-bus or pci-bus.
Parts of this patch are based on an initial implementation by
Thomas Richter.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Use the static SRCU initializer for `cpufreq_transition_notifier_list'.
This avoids the init_cpufreq_transition_notifier_list() initcall. Its
only purpose is to initialize the SRCU notifier once during boot and set
another variable which is used as an indicator whether the init was
perfromed before cpufreq_register_notifier() was used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are macros for static initializer for the three out of four
possible notifier types, that are:
ATOMIC_NOTIFIER_HEAD()
BLOCKING_NOTIFIER_HEAD()
RAW_NOTIFIER_HEAD()
This patch provides a static initilizer for the forth type to make it
complete.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the policy limits are updated via cpufreq_update_policy() and
subsequently via sysfs, the limits stored in user_policy may be
set incorrectly.
For example, if both min and max are set via sysfs to the maximum
available frequency, user_policy.min and user_policy.max will also
be the maximum. If a policy notifier triggered by
cpufreq_update_policy() lowers both the min and the max at this
point, that change is not reflected by the user_policy limits, so
if the max is updated again via sysfs to the same lower value,
then user_policy.max will be lower than user_policy.min which
shouldn't happen. In particular, if one of the policy CPUs is
then taken offline and back online, cpufreq_set_policy() will
fail for it due to a failing limits check.
To prevent that from happening, initialize the min and max fields
of the new_policy object to the ones stored in user_policy that
were previously set via sysfs.
Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This is useful at least for multipath testing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
|
|
With recent CQ handling improvements we can now move the locking into
__nvme_submit_cmd. Also remove the local tail variable to make the code
more obvious, remove the __ prefix in the name, and fix the comments
describing the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
|
|
The block layer's timeout handling currently prevents drivers from
completing commands outside the timeout callback once blk-mq decides
they've expired. If a device breaks, this could potentially create many
thousands of timed out commands. There's nothing of value to be gleaned
from observing each of those messages, so this patch adds a rate limit
on them.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The current checks for whether a new controller request "matches" an
existing controller ignores controller state and checks identity strings.
There are cases where an existing controller may be in its last steps of
deletion when they are "matched" by a new connection.
Change the behavior so that the new connection ignores controllers that
are deleted.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU fix from Paul E. McKenney:
"This additional v4.18 pull request contains a single commit that fell
through the cracks:
Provide early rcu_cpu_starting() callback for the benefit of the
x86/mtrr code, which needs RCU to be available on incoming CPUs
earlier than has been the case in the past."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We have several Lenovo AIOs like M810z, M820z and M920z, they have
the same design for mic-mute hotkey and led and they use the same
codec with the same pin configuration, so use the pin conf table to
apply fix to all of them.
Fixes: 29693efcea0f ("ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"We are switching a bunch of Lenovo devices with Synaptics touchpads
from PS/2 emulation over to native RMI/SMbus.
Given that all commits are marked for stable there is no point
delaying them till next release"
[ Also fix a too-small stack array for i2c communication in elan driver ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c_smbus - fix corrupted stack
Input: synaptics - add Lenovo 80 series ids to SMBus
Input: synaptics - add Intertouch support on X1 Carbon 6th and X280
Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI
Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMI
|
|
as it is, the logics in native io_submit(2) is "if asked for
more than LONG_MAX/sizeof(pointer) iocbs to submit, don't
bother with more than LONG_MAX/sizeof(pointer)" (i.e.
512M requests on 32bit and 1E requests on 64bit) while
compat io_submit(2) goes with "stop after the first
PAGE_SIZE/sizeof(pointer) iocbs", i.e. 1K or so. Which is
* inconsistent
* *way* too much in native case
* possibly too little in compat one
and
* wrong anyway, since the natural point where we
ought to stop bothering is ctx->nr_events
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
get rid of insane "copy array of 32bit pointers into an array of
native ones" glue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The logics for 'avail' is
* not past the tail of cyclic buffer
* no more than asked
* not past the end of buffer
* not past the end of a page
Unobfuscate the last part.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
same way
... so just make them return 0 when caller does not need to destroy iocb
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We really want iocb out of io_cancel(2) reach before we start tearing
it down.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://people.freedesktop.org/~gabbayo/linux into drm-next
- Build amdkfd's related files inside amdgpu only if amdkfd is built
- Fix compile warning
- Print info message in case ASIC is not supported by amdkfd
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180528110435.GA17960@odedg-x270
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Add more HW overlays support
- It enables hardware overlay number 4 and 5. For this,
this patch series adds required clocks.
Several fixups
- Fix default value of zpos according to real hardware overlay number.
- Fix error value of exynos_Drm_crtc_get_by_type function correctly.
- Fix static checker warning of scaler_task_done function.
- Fix signedness bug in fimc_setup_clocks function.
One cleanup
- Disable framedone interrupt of DSI device which is not required.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1527229919-25665-1-git-send-email-inki.dae@samsung.com
|
|
into drm-fixes
One last fix for 4.17. Fix a suspend regression in DC.
* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/display: Fix BUG_ON during CRTC atomic check update
|
