summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-21md: raid5: avoid string overflow warningArnd Bergmann
gcc warns about a possible overflow of the kmem_cache string, when adding four characters to a string of the same length: drivers/md/raid5.c: In function 'setup_conf': drivers/md/raid5.c:2207:34: error: '-alt' directive writing 4 bytes into a region of size between 1 and 32 [-Werror=format-overflow=] sprintf(conf->cache_name[1], "%s-alt", conf->cache_name[0]); ^~~~ drivers/md/raid5.c:2207:2: note: 'sprintf' output between 5 and 36 bytes into a destination of size 32 sprintf(conf->cache_name[1], "%s-alt", conf->cache_name[0]); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If I'm counting correctly, we need 11 characters for the fixed part of the string and 18 characters for a 64-bit pointer (when no gendisk is used), so that leaves three characters for conf->level, which should always be sufficient. This makes the code use snprintf() with the correct length, to make the code more robust against changes, and to get the compiler to shut up. In commit f4be6b43f1ac ("md/raid5: ensure we create a unique name for kmem_cache when mddev has no gendisk") from 2010, Neil said that the pointer could be removed "shortly" once devices without gendisk are disallowed. I have no idea if that happened, but if it did, that should probably be changed as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-21raid5-ppl: fix handling flush requestsArtur Paszkiewicz
Add missing bio completion. Without this any flush request would hang. Fixes: 1532d9e87e8b ("raid5-ppl: PPL support for disks with write-back cache enabled") Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-21objtool, retpolines: Integrate objtool with retpoline support more closelyPeter Zijlstra
Disable retpoline validation in objtool if your compiler sucks, and otherwise select the validation stuff for CONFIG_RETPOLINE=y (most builds would already have it set due to ORC). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Simplify ENCODE_FRAME_POINTERJosh Poimboeuf
On 64-bit, the stack pointer is always aligned on interrupt, so instead of setting the LSB of the pt_regs address, we can just add 1 to it. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180221024214.lhl5jfgw33c4vz3m@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21extable: Make init_kernel_text() globalJosh Poimboeuf
Convert init_kernel_text() to a global function and use it in a few places instead of manually comparing _sinittext and _einittext. Note that kallsyms.h has a very similar function called is_kernel_inittext(), but its end check is inclusive. I'm not sure whether that's intentional behavior, so I didn't touch it. Suggested-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/4335d02be8d45ca7d265d2f174251d0b7ee6c5fd.1519051220.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21jump_label: Warn on failed jump_label patching attemptJosh Poimboeuf
Currently when the jump label code encounters an address which isn't recognized by kernel_text_address(), it just silently fails. This can be dangerous because jump labels are used in a variety of places, and are generally expected to work. Convert the silent failure to a warning. This won't warn about attempted writes to tracepoints in __init code after initmem has been freed, as those are already guarded by the entry->code check. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/de3a271c93807adb7ed48f4e946b4f9156617680.1519051220.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21jump_label: Explicitly disable jump labels in __init codeJosh Poimboeuf
After initmem has been freed, any jump labels in __init code are prevented from being written to by the kernel_text_address() check in __jump_label_update(). However, this check is quite broad. If kernel_text_address() were to return false for any other reason, the jump label write would fail silently with no warning. For jump labels in module init code, entry->code is set to zero to indicate that the entry is disabled. Do the same thing for core kernel init code. This makes the behavior more consistent, and will also make it more straightforward to detect non-init jump label write failures in the next patch. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c52825c73f3a174e8398b6898284ec20d4deb126.1519051220.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Open-code switch_to_thread_stack()Dominik Brodowski
Open-code the two instances which called switch_to_thread_stack(). This allows us to remove the wrapper around DO_SWITCH_TO_THREAD_STACK. While at it, update the UNWIND hint to reflect where the IRET frame is, and update the commentary to reflect what we are actually doing here. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-7-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Move ASM_CLAC to interrupt_entry()Dominik Brodowski
Moving ASM_CLAC to interrupt_entry means two instructions (addq / pushq and call interrupt_entry) are not covered by it. However, it offers a noticeable size reduction (-.2k): text data bss dec hex filename 16882 0 0 16882 41f2 entry_64.o-orig 16623 0 0 16623 40ef entry_64.o Suggested-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-6-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Remove 'interrupt' macroDominik Brodowski
It is now trivial to call interrupt_entry() and then the actual worker. Therefore, remove the interrupt macro and open code it all. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-5-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry()Dominik Brodowski
We can also move the CLD, SWAPGS, and the switch_to_thread_stack() call to the interrupt_entry() helper function. As we do not want call depths of two, convert switch_to_thread_stack() to a macro. However, switch_to_thread_stack() has another user in entry_64_compat.S, which currently expects it to be a function. To keep the code changes in this patch minimal, create a wrapper function. The switch to a macro means that there is some binary code duplication if CONFIG_IA32_EMULATION=y is enabled. Therefore, the size reduction differs whether CONFIG_IA32_EMULATION is enabled or not: CONFIG_IA32_EMULATION=y (-0.13k): text data bss dec hex filename 17158 0 0 17158 4306 entry_64.o-orig 17028 0 0 17028 4284 entry_64.o CONFIG_IA32_EMULATION=n (-0.27k): text data bss dec hex filename 17158 0 0 17158 4306 entry_64.o-orig 16882 0 0 16882 41f2 entry_64.o Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-4-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entryDominik Brodowski
Moving the switch to IRQ stack from the interrupt macro to the helper function requires some trickery: All ENTER_IRQ_STACK really cares about is where the "original" stack -- meaning the GP registers etc. -- is stored. Therefore, we need to offset the stored RSP value by 8 whenever ENTER_IRQ_STACK is called from within a function. In such cases, and after switching to the IRQ stack, we need to push the "original" return address (i.e. the return address from the call to the interrupt entry function) to the IRQ stack. This trickery allows us to carve another .85k from the text size (it would be more except for the additional unwind hints): text data bss dec hex filename 18006 0 0 18006 4656 entry_64.o-orig 17158 0 0 17158 4306 entry_64.o Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-3-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper functionDominik Brodowski
The PUSH_AND_CLEAR_REGS macro is able to insert the GP registers "above" the original return address. This allows us to move a sizeable part of the interrupt entry macro to an interrupt entry helper function: text data bss dec hex filename 21088 0 0 21088 5260 entry_64.o-orig 18006 0 0 18006 4656 entry_64.o Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180220210113.6725-2-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPPIngo Molnar
firmware_restrict_branch_speculation_*() recently started using preempt_enable()/disable(), but those are relatively high level primitives and cause build failures on some 32-bit builds. Since we want to keep <asm/nospec-branch.h> low level, convert them to macros to avoid header hell... Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: arjan.van.de.ven@intel.com Cc: bp@alien8.de Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21MAINTAINERS: add Freescale pin controllersStefan Agner
Add Dong Aisheng, Fabio Estevam, Shawn Guo and myself as maintainer and the Pengutronix kernel team as reviewer. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-21locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()Andrea Parri
Continuing along with the fight against smp_read_barrier_depends() [1] (or rather, against its improper use), add an unconditional barrier to cmpxchg. This guarantees that dependency ordering is preserved when a dependency is headed by an unsuccessful cmpxchg. As it turns out, the change could enable further simplification of LKMM as proposed in [2]. [1] https://marc.info/?l=linux-kernel&m=150884953419377&w=2 https://marc.info/?l=linux-kernel&m=150884946319353&w=2 https://marc.info/?l=linux-kernel&m=151215810824468&w=2 https://marc.info/?l=linux-kernel&m=151215816324484&w=2 [2] https://marc.info/?l=linux-kernel&m=151881978314872&w=2 Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/r/1519152356-4804-1-git-send-email-parri.andrea@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()Arnd Bergmann
GCC-8 shows a warning for the x86 oprofile code that copies per-CPU data from CPU 0 to all other CPUs, which when building a non-SMP kernel turns into a memcpy() with identical source and destination pointers: arch/x86/oprofile/nmi_int.c: In function 'mux_clone': arch/x86/oprofile/nmi_int.c:285:2: error: 'memcpy' source argument is the same as destination [-Werror=restrict] memcpy(per_cpu(cpu_msrs, cpu).multiplex, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ per_cpu(cpu_msrs, 0).multiplex, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(struct op_msr) * model->num_virt_counters); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/oprofile/nmi_int.c: In function 'nmi_setup': arch/x86/oprofile/nmi_int.c:466:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] arch/x86/oprofile/nmi_int.c:470:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] I have analyzed a number of such warnings now: some are valid and the GCC warning is welcome. Others turned out to be false-positives, and GCC was changed to not warn about those any more. This is a corner case that is a false-positive but the GCC developers feel it's better to keep warning about it. In this case, it seems best to work around it by telling GCC a little more clearly that this code path is never hit with an IS_ENABLED() configuration check. Cc:stable as we also want old kernels to build cleanly with GCC-8. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Sebor <msebor@gcc.gnu.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oprofile-list@lists.sf.net Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180220205826.2008875-1-arnd@arndb.de Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84095 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21i2c: i801: Add missing documentation entries for Braswell and Kaby LakeJarkko Nikula
Commits adding PCI IDs for Intel Braswell and Kaby Lake PCH-H lacked the respective Kconfig and Documentation/i2c/busses/i2c-i801 change. Add them now. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-02-21i2c: designware: must wait for enableBen Gardner
One I2C bus on my Atom E3845 board has been broken since 4.9. It has two devices, both declared by ACPI and with built-in drivers. There are two back-to-back transactions originating from the kernel, one targeting each device. The first transaction works, the second one locks up the I2C controller. The controller never recovers. These kernel logs show up whenever an I2C transaction is attempted after this failure. i2c-designware-pci 0000:00:18.3: timeout in disabling adapter i2c-designware-pci 0000:00:18.3: timeout waiting for bus ready Waiting for the I2C controller status to indicate that it is enabled before programming it fixes the issue. I have tested this patch on 4.14 and 4.15. Fixes: commit 2702ea7dbec5 ("i2c: designware: wait for disable/enable only if necessary") Cc: linux-stable <stable@vger.kernel.org> #4.13+ Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-02-21objtool: Add module specific retpoline rulesPeter Zijlstra
David allowed retpolines in .init.text, except for modules, which will trip up objtool retpoline validation, fix that. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21objtool: Add retpoline validationPeter Zijlstra
David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled builds, where it validates no unannotated indirect jumps or calls are left. Add an additional .discard.retpoline_safe section to allow annotating the few indirect sites that are required and safe. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21objtool: Use existing global variables for optionsPeter Zijlstra
Use the existing global variables instead of passing them around and creating duplicate global variables. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute()Peter Zijlstra
This is boot code and thus Spectre-safe: we run this _way_ before userspace comes along to have a chance to poison our branch predictor. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/boot, objtool: Annotate indirect jump in secondary_startup_64()Peter Zijlstra
The objtool retpoline validation found this indirect jump. Seeing how it's on CPU bringup before we run userspace it should be safe, annotate it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/paravirt, objtool: Annotate indirect callsPeter Zijlstra
Paravirt emits indirect calls which get flagged by objtool retpoline checks, annotate it away because all these indirect calls will be patched out before we start userspace. This patching happens through alternative_instructions() -> apply_paravirt() -> pv_init_ops.patch() which will eventually end up in paravirt_patch_default(). This function _will_ write direct alternatives. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21x86/speculation, objtool: Annotate indirect calls/jumps for objtoolPeter Zijlstra
Annotate the indirect calls/jumps in the CALL_NOSPEC/JUMP_NOSPEC alternatives. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21locking/mutex: Add comment to __mutex_owner() to deter usagePeter Zijlstra
Attempt to deter usage, this is not a public interface. It is entirely possible to implement a conformant mutex without having this owner field (in fact, we used to have that). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21drm/tve200: fix kernel-doc documentation comment includeJani Nikula
The DOC: line acts as an identifier for the :doc: include. Fixes: ./drivers/gpu/drm/tve200/tve200_drv.c:1: warning: no structured comments found Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220142008.9330-1-jani.nikula@intel.com
2018-02-20net: sched: report if filter is too large to dumpRoman Kapl
So far, if the filter was too large to fit in the allocated skb, the kernel did not return any error and stopped dumping. Modify the dumper so that it returns -EMSGSIZE when a filter fails to dump and it is the first filter in the skb. If we are not first, we will get a next chance with more room. I understand this is pretty near to being an API change, but the original design (silent truncation) can be considered a bug. Note: The error case can happen pretty easily if you create a filter with 32 actions and have 4kb pages. Also recent versions of iproute try to be clever with their buffer allocation size, which in turn leads to Signed-off-by: Roman Kapl <code@rkapl.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21drm/edid: quirk Sony PlayStation VR headset as non-desktopPhilipp Zabel
This uses the EDID info from the Sony PlayStation VR headset, when connected directly, to mark it as non-desktop. Since the connection box (product id b403) defaults to HDMI pass-through to the TV, it is not marked as non-desktop. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-02-21drm/edid: quirk Windows Mixed Reality headsets as non-desktopPhilipp Zabel
This uses the EDID info from Lenovo Explorer (LEN-b800), Acer AH100 (ACR-7fce), and Samsung Odyssey (SEC-144a) to mark them as non-desktop. The other entries are for the HP Windows Mixed Reality Headset (HPN-3515), the Fujitsu Windows Mixed Reality headset (FUJ-1970), the Dell Visor (DEL-7fce), and the ASUS HC102 (AUS-c102). They are not tested with real hardware, but listed as HMD monitors alongside the tested headsets in the Microsoft HololensSensors driver package. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-02-21drm/edid: quirk Oculus Rift headsets as non-desktopPhilipp Zabel
This uses the EDID info from Oculus Rift DK1 (OVR-0001), DK2 (OVR-0003), and CV1 (OVR-0004) to mark them as non-desktop. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-02-21ocxl: Fix potential bad errno on irq allocationFrederic Barrat
Fix some issues found by a static checker: When allocating an AFU interrupt, if the driver cannot copy the output parameters to userland, the errno value was not set to EFAULT Remove a (now) useless cast. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-21powerpc/eeh: Fix crashes in eeh_report_resume()Juan J. Alvarez
The notify_resume() callback in eeh_ops is NULL on powernv, leading to crashes: NIP (null) LR eeh_report_resume+0x218/0x220 Call Trace: eeh_report_resume+0x1f0/0x220 (unreliable) eeh_pe_dev_traverse+0x98/0x170 eeh_handle_normal_event+0x3f4/0x650 eeh_handle_event+0x54/0x380 eeh_event_handler+0x14c/0x210 kthread+0x168/0x1b0 ret_from_kernel_thread+0x5c/0xb4 Fix it by adding a check before calling it. Fixes: 856e1eb9bdd4 ("PCI/AER: Add uevents in AER and EEH error/resume") Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com> Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by: Carol L. Soto <clsoto@us.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Tested-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> [mpe: Rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-21Merge tag 'drm-misc-fixes-2018-01-31' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - fix lut loading for cirrus * tag 'drm-misc-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc: drm/cirrus: Load lut in crtc_commit
2018-02-21Merge tag 'exynos-drm-fixes-for-v4.16-rc3' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes - three fixeups . it fixes potential issues[1] by using monotonic timestamp instead of 'struct timeval' . correct HDMI_I2S_PIN_SEL_1 definition and setting value. . fix bit shift typo of FIMC register definition - two cleanups . remove unnecessary error messages . remove exynos_drm_rotator.h file [1] https://patchwork.kernel.org/patch/10170205/ * tag 'exynos-drm-fixes-for-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1 drm/exynos: remove exynos_drm_rotator.h drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions drm/exynos: fix comparison to bitshift when dealing with a mask drm/exynos: g2d: use monotonic timestamps
2018-02-20net/mlx5: Fix error handling when adding flow rulesVlad Buslov
If building match list or adding existing fg fails when node is locked, function returned without unlocking it. This happened if node version changed or adding existing fg returned with EAGAIN after jumping to search_again_locked label. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5: E-Switch, Fix drop counters use before creationEugenia Emantayev
First use of drop counters happens in esw_apply_vport_conf function, while they are allocated later in the flow. Fix that by moving esw_vport_create_drop_counters function to be called before the first use. Fixes: b8a0dbe3a90b ("net/mlx5e: E-switch, Add steering drop counters") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5: Add header re-write to the checks for conflicting actionsOr Gerlitz
We can't allow only some of the rules sharing an FTE to ask for header re-write, add it to the conflicting action checks. Fixes: 0d235c3fabb7 ('net/mlx5: Add hash table to search FTEs in a flow-group') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5: Use 128B cacheline size for 128B or larger cachelinesDaniel Jurgens
The adapter uses the cache_line_128byte setting to set the bounds for end padding. On systems where the cacheline size is greater than 128B use 128B instead of the default of 64B. This results in fewer partial cacheline writes. There's a 50% chance it will pad to the end of a 256B cache line vs only 25% when using 64B. Fixes: f32f5bd2eb7e ("net/mlx5: Configure cache line size for start and end padding") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Specify numa node when allocating drop rqGal Pressman
When allocating a drop rq, no numa node is explicitly set which means allocations are done on node zero. This is not necessarily the nearest numa node to the HCA, and even worse, might even be a memoryless numa node. Choose the numa_node given to us by the pci device in order to properly allocate the coherent dma memory instead of assuming zero is valid. Fixes: 556dd1b9c313 ("net/mlx5e: Set drop RQ's necessary parameters only") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Return error if prio is specified when offloading eswitch vlan pushOr Gerlitz
This isn't supported when we emulate eswitch vlan push action which is the current state of things. Fixes: 8b32580df1cb ('net/mlx5e: Add TC vlan action for SRIOV offloads') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5: Address static checker warnings on non-constant initializersOr Gerlitz
Address these sparse warnings on drivers/net/ethernet/mellanox/mlx5 [..]/core/diag/fs_tracepoint.c:99:53: warning: non-constant initializer for static object [..]/core/diag/fs_tracepoint.c:102:53: warning: non-constant initializer for static object etc Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Eliminate build warnings on no previous prototypeOr Gerlitz
Fix these gcc warnings on drivers/net/ethernet/mellanox/mlx5: [..]/core/lib/clock.c:454:6: warning: no previous prototype for 'mlx5_init_clock' [-Wmissing-prototypes] [..]/core/lib/clock.c:510:6: warning: no previous prototype for 'mlx5_cleanup_clock' [-Wmissing-prototypes] [..]/core/en_main.c:3141:5: warning: no previous prototype for 'mlx5e_setup_tc' [-Wmissing-prototypes] Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Verify inline header size do not exceed SKB linear sizeEran Ben Elisha
Driver tries to copy at least MLX5E_MIN_INLINE bytes into the control segment of the WQE. It assumes that the linear part contains at least MLX5E_MIN_INLINE bytes, which can be wrong. Cited commit verified that driver will not copy more bytes into the inline header part that the actual size of the packet. Re-factor this check to make sure we do not exceed the linear part as well. This fix is aligned with the current driver's assumption that the entire L2 will be present in the linear part of the SKB. Fixes: 6aace17e64f4 ("net/mlx5e: Fix inline header size for small packets") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Fix loopback self test when GRO is offInbar Karmy
When GRO is off, the transport header pointer in sk_buff is initialized to network's header. To find the udp header, instead of using udp_hdr() which assumes skb_network_header was set, manually calculate the udp header offset. Fixes: 0952da791c97 ("net/mlx5e: Add support for loopback selftest") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20net/mlx5e: Fix TCP checksum in LRO buffersGal Pressman
When receiving an LRO packet, the checksum field is set by the hardware to the checksum of the first coalesced packet. Obviously, this checksum is not valid for the merged LRO packet and should be fixed. We can use the CQE checksum which covers the checksum of the entire merged packet TCP payload to help us calculate the checksum incrementally. Tested by sending IPv4/6 traffic with LRO enabled, RX checksum disabled and watching nstat checksum error counters (in addition to the obvious bandwidth drop caused by checksum errors). This bug is usually "hidden" since LRO packets would go through the CHECKSUM_UNNECESSARY flow which does not validate the packet checksum. It's important to note that previous to this patch, LRO packets provided with CHECKSUM_UNNECESSARY are indeed packets with a correct validated checksum (even though the checksum inside the TCP header is incorrect), since the hardware LRO aggregation is terminated upon receiving a packet with bad checksum. Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-02-20KVM: s390: provide only a single function for setting the tod (fix SCK)David Hildenbrand
Right now, SET CLOCK called in the guest does not properly take care of the epoch index, as the call goes via the old kvm_s390_set_tod_clock() interface. So the epoch index is neither reset to 0, if required, nor properly set to e.g. 0xff on negative values. Fix this by providing a single kvm_s390_set_tod_clock() function. Move Multiple-epoch facility handling into it. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180207114647.6220-3-david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-20KVM: s390: consider epoch index on TOD clock syncsDavid Hildenbrand
For now, we don't take care of over/underflows. Especially underflows are critical: Assume the epoch is currently 0 and we get a sync request for delta=1, meaning the TOD is moved forward by 1 and we have to fix it up by subtracting 1 from the epoch. Right now, this will leave the epoch index untouched, resulting in epoch=-1, epoch_idx=0, which is wrong. We have to take care of over and underflows, also for the VSIE case. So let's factor out calculation into a separate function. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180207114647.6220-5-david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [use u8 for idx]
2018-02-20KVM: s390: consider epoch index on hotplugged CPUsDavid Hildenbrand
We must copy both, the epoch and the epoch_idx. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180207114647.6220-4-david@redhat.com> Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-13 12:38:06 +0000