summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-01-31kbuild: fix W= flags in the help messageMasahiro Yamada
W=c and W=e are supported. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2024-01-31ALSA: hda/realtek: Apply headset jack quirk for non-bass alc287 thinkpadsJosé Relvas
There currently exists two thinkpad headset jack fixups: ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK ALC285_FIXUP_THINKPAD_HEADSET_JACK The latter is applied to alc285 and alc287 thinkpads which contain bass speakers. However, the former was only being applied to alc285 thinkpads, leaving non-bass alc287 thinkpads with no headset button controls. This patch fixes that by adding ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK to the alc287 chains, allowing the detection of headset buttons. Signed-off-by: José Relvas <josemonsantorelvas@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240131113407.34698-3-josemonsantorelvas@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-31parisc: BTLB: Fix crash when setting up BTLB at CPU bringupHelge Deller
When using hotplug and bringing up a 32-bit CPU, ask the firmware about the BTLB information to set up the static (block) TLB entries. For that write access to the static btlb_info struct is needed, but since it is marked __ro_after_init the kernel segfaults with missing write permissions. Fix the crash by dropping the __ro_after_init annotation. Fixes: e5ef93d02d6c ("parisc: BTLB: Initialize BTLB tables at CPU startup") Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v6.6+
2024-01-31ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x partsLennert Buytenhek
ASMedia have confirmed that all ASM106x parts currently listed in ahci_pci_tbl[] suffer from the 43-bit DMA address limitation that we ran into on the ASM1061, and therefore, we need to apply the quirk added by commit 20730e9b2778 ("ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers") to the other supported ASM106x parts as well. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-ide/ZbopwKZJAKQRA4Xv@x1-carbon/ Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org> [cassel: add link to ASMedia confirmation email] Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-01-31HID: bpf: use __bpf_kfunc instead of noinlineBenjamin Tissoires
Follow the docs at Documentation/bpf/kfuncs.rst: - declare the function with `__bpf_kfunc` - disables missing prototype warnings, which allows to remove them from include/linux/hid-bpf.h Removing the prototypes is not an issue because we currently have to redeclare them when writing the BPF program. They will eventually be generated by bpftool directly AFAIU. Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-3-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31HID: bpf: actually free hdev memory after attaching a HID-BPF programBenjamin Tissoires
Turns out that I got my reference counts wrong and each successful bus_find_device() actually calls get_device(), and we need to manually call put_device(). Ensure each bus_find_device() gets a matching put_device() when releasing the bpf programs and fix all the error paths. Cc: <stable@vger.kernel.org> Fixes: f5c27da4e3c8 ("HID: initial BPF implementation") Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-2-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31HID: bpf: remove double fdget()Benjamin Tissoires
When the kfunc hid_bpf_attach_prog() is called, we called twice fdget(): one for fetching the type of the bpf program, and one for actually attaching the program to the device. The problem is that between those two calls, we have no guarantees that the prog_fd is still the same file descriptor for the given program. Solve this by calling bpf_prog_get() earlier, and use this to fetch the program type. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/bpf/CAO-hwJJ8vh8JD3-P43L-_CLNmPx0hWj44aom0O838vfP4=_1CA@mail.gmail.com/T/#t Cc: <stable@vger.kernel.org> Fixes: f5c27da4e3c8 ("HID: initial BPF implementation") Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-1-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31USB: serial: option: add Fibocom FM101-GL variantPuliang Lu
Update the USB serial option driver support for the Fibocom FM101-GL LTE modules as there are actually several different variants. - VID:PID 2cb7:01a3, FM101-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) 0x01a3:mbim,gnss Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a3 Rev=05.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=5ccd5cd4 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Puliang Lu <puliang.lu@fibocom.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-01-31pinctrl: amd: Add IRQF_ONESHOT to the interrupt requestMario Limonciello
On some systems the interrupt is shared between GPIO controller and ACPI SCI. When the interrupt is shared with the ACPI SCI the flags need to be identical. This should fix the GPIO controller failing to work after commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI"). ``` [ 0.417335] genirq: Flags mismatch irq 9. 00000088 (pinctrl_amd) vs. 00002080 (acpi) [ 0.420073] amd_gpio: probe of AMDI0030:00 failed with error -16 ``` Cc: Rafael J. Wysocki <rafael@kernel.org> Reported-by: Christian Heusel <christian@heusel.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218407 Fixes: 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iRqUXeuKmC_+dAJtDBLWQ3x15n4gRH48y7MEaLoXF+UA@mail.gmail.com/T/#mc5506014141b61e472b24e095889535a04458083 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Tested-by: Christian Heusel <christian@heusel.eu> Link: https://lore.kernel.org/r/20240123180818.3994-1-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-01-31btrfs: do not ASSERT() if the newly created subvolume already got readQu Wenruo
[BUG] There is a syzbot crash, triggered by the ASSERT() during subvolume creation: assertion failed: !anon_dev, in fs/btrfs/disk-io.c:1319 ------------[ cut here ]------------ kernel BUG at fs/btrfs/disk-io.c:1319! invalid opcode: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:btrfs_get_root_ref.part.0+0x9aa/0xa60 <TASK> btrfs_get_new_fs_root+0xd3/0xf0 create_subvol+0xd02/0x1650 btrfs_mksubvol+0xe95/0x12b0 __btrfs_ioctl_snap_create+0x2f9/0x4f0 btrfs_ioctl_snap_create+0x16b/0x200 btrfs_ioctl+0x35f0/0x5cf0 __x64_sys_ioctl+0x19d/0x210 do_syscall_64+0x3f/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace 0000000000000000 ]--- [CAUSE] During create_subvol(), after inserting root item for the newly created subvolume, we would trigger btrfs_get_new_fs_root() to get the btrfs_root of that subvolume. The idea here is, we have preallocated an anonymous device number for the subvolume, thus we can assign it to the new subvolume. But there is really nothing preventing things like backref walk to read the new subvolume. If that happens before we call btrfs_get_new_fs_root(), the subvolume would be read out, with a new anonymous device number assigned already. In that case, we would trigger ASSERT(), as we really expect no one to read out that subvolume (which is not yet accessible from the fs). But things like backref walk is still possible to trigger the read on the subvolume. Thus our assumption on the ASSERT() is not correct in the first place. [FIX] Fix it by removing the ASSERT(), and just free the @anon_dev, reset it to 0, and continue. If the subvolume tree is read out by something else, it should have already get a new anon_dev assigned thus we only need to free the preallocated one. Reported-by: Chenyuan Yang <chenyuan0y@gmail.com> Fixes: 2dfb1e43f57d ("btrfs: preallocate anon block device at first phase of snapshot creation") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-01-31btrfs: forbid deleting live subvol qgroupBoris Burkov
If a subvolume still exists, forbid deleting its qgroup 0/subvolid. This behavior generally leads to incorrect behavior in squotas and doesn't have a legitimate purpose. Fixes: cecbb533b5fc ("btrfs: record simple quota deltas in delayed refs") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-01-31btrfs: forbid creating subvol qgroupsBoris Burkov
Creating a qgroup 0/subvolid leads to various races and it isn't helpful, because you can't specify a subvol id when creating a subvol, so you can't be sure it will be the right one. Any requirements on the automatic subvol can be gratified by using a higher level qgroup and the inheritance parameters of subvol creation. Fixes: cecbb533b5fc ("btrfs: record simple quota deltas in delayed refs") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-01-31btrfs: send: return EOPNOTSUPP on unknown flagsDavid Sterba
When some ioctl flags are checked we return EOPNOTSUPP, like for BTRFS_SCRUB_SUPPORTED_FLAGS, BTRFS_SUBVOL_CREATE_ARGS_MASK or fallocate modes. The EINVAL is supposed to be for a supported but invalid values or combination of options. Fix that when checking send flags so it's consistent with the rest. CC: stable@vger.kernel.org # 4.14+ Link: https://lore.kernel.org/linux-btrfs/CAL3q7H5rryOLzp3EKq8RTbjMHMHeaJubfpsVLF6H4qJnKCUR1w@mail.gmail.com/ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-01-30Merge tag 'erofs-for-6.8-rc3-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: - fix an infinite loop issue of sub-page compressed data support found with lengthy stress tests on a 64k-page arm64 VM - optimize the temporary buffer allocation for low-memory scenarios, which can reduce 20.21% on average under a heavy multi-app launch benchmark workload - get rid of unnecessary GFP_NOFS * tag 'erofs-for-6.8-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: relaxed temporary buffers allocation on readahead erofs: fix infinite loop due to a race of filling compressed_bvecs erofs: get rid of unneeded GFP_NOFS
2024-01-30Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-01-29 (e1000e, ixgbe) This series contains updates to e1000e and ixgbe drivers. Jake corrects values used for maximum frequency adjustment for e1000e. Christophe Jaillet adjusts error handling path so that semaphore is released on ixgbe. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550() e1000e: correct maximum frequency adjustment values ==================== Link: https://lore.kernel.org/r/20240129185240.787397-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30devlink: Fix referring to hw_addr attribute during state validationParav Pandit
When port function state change is requested, and when the driver does not support it, it refers to the hw address attribute instead of state attribute. Seems like a copy paste error. Fix it by referring to the port function state attribute. Fixes: c0bea69d1ca7 ("devlink: Validate port function request") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240129191059.129030-1-parav@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30bridge: mcast: fix disabled snooping after long uptimeLinus Lüssing
The original idea of the delay_time check was to not apply multicast snooping too early when an MLD querier appears. And to instead wait at least for MLD reports to arrive before switching from flooding to group based, MLD snooped forwarding, to avoid temporary packet loss. However in a batman-adv mesh network it was noticed that after 248 days of uptime 32bit MIPS based devices would start to signal that they had stopped applying multicast snooping due to missing queriers - even though they were the elected querier and still sending MLD queries themselves. While time_is_before_jiffies() generally is safe against jiffies wrap-arounds, like the code comments in jiffies.h explain, it won't be able to track a difference larger than ULONG_MAX/2. With a 32bit large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS devices running OpenWrt this would result in a difference larger than ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and time_is_before_jiffies() would then start to return false instead of true. Leading to multicast snooping not being applied to multicast packets anymore. Fix this issue by using a proper timer_list object which won't have this ULONG_MAX/2 difference limitation. Fixes: b00589af3b04 ("bridge: disable snooping if there is no querier") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240127175033.9640-1-linus.luessing@c0d3.blue Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30selftests: net: Add missing matchall classifierIdo Schimmel
One of the test cases in the test_bridge_backup_port.sh selftest relies on a matchall classifier to drop unrelated traffic so that the Tx drop counter on the VXLAN device will only be incremented as a result of traffic generated by the test. However, the configuration option for the matchall classifier is missing from the configuration file which might explain the failures we see in the netdev CI [1]. Fix by adding CONFIG_NET_CLS_MATCHALL to the configuration file. [1] # Backup nexthop ID - invalid IDs # ------------------------------- [...] # TEST: Forwarding out of vx0 [ OK ] # TEST: No forwarding using backup nexthop ID [ OK ] # TEST: Tx drop increased [FAIL] # TEST: IPv6 address family nexthop as backup nexthop [ OK ] # TEST: No forwarding out of swp1 [ OK ] # TEST: Forwarding out of vx0 [ OK ] # TEST: No forwarding using backup nexthop ID [ OK ] # TEST: Tx drop increased [FAIL] [...] Fixes: b408453053fb ("selftests: net: Add bridge backup port and backup nexthop ID test") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240129123703.1857843-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30misc: open-dice: Fix spurious lockdep warningWill Deacon
When probing the open-dice driver with PROVE_LOCKING=y, lockdep complains that the mutex in 'drvdata->lock' has a non-static key: | INFO: trying to register non-static key. | The code is fine but needs lockdep annotation, or maybe | you didn't initialize this object before use? | turning off the locking correctness validator. Fix the problem by initialising the mutex memory with mutex_init() instead of __MUTEX_INITIALIZER(). Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Brazdil <dbrazdil@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240126152410.10148-1-will@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-30misc: fastrpc: Mark all sessions as invalid in cb_removeEkansh Gupta
In remoteproc shutdown sequence, rpmsg_remove will get called which would depopulate all the child nodes that have been created during rpmsg_probe. This would result in cb_remove call for all the context banks for the remoteproc. In cb_remove function, session 0 is getting skipped which is not correct as session 0 will never become available again. Add changes to mark session 0 also as invalid. Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-30Merge tag 'linux_kselftest-kunit-fixes-6.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan: "NULL vs IS_ERR() bug fixes, documentation update, MAINTAINERS file update to add Rae Moar as a reviewer, and a fix to run test suites only after module initialization completes" * tag 'linux_kselftest-kunit-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Documentation: KUnit: Update the instructions on how to test static functions kunit: run test suites only after module initialization completes MAINTAINERS: kunit: Add Rae Moar as a reviewer kunit: device: Fix a NULL vs IS_ERR() check in init() kunit: Fix a NULL vs IS_ERR() bug
2024-01-30Merge tag 'linux_kselftest-fixes-6.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Three fixes to livepatch, rseq, and seccomp tests" * tag 'linux_kselftest-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest/seccomp: Report each expectation we assert as a KTAP test kselftest/seccomp: Use kselftest output functions for benchmark selftests/livepatch: fix and refactor new dmesg message code selftests/rseq: Do not skip !allowed_cpus for mm_cid
2024-01-30Input: xpad - add Lenovo Legion Go controllersBrenton Simpson
The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck. It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad, volume buttons, a power button, and 2 LED ring lights. The Legion Go firmware presents these controls as a USB hub with various devices attached. In its default state, the gamepad is presented as an Xbox controller connected to this hub. (By holding a combination of buttons, it can be changed to use the older DirectInput API.) This patch teaches the existing Xbox controller module `xpad` to bind to the controller in the Legion Go, which enables support for the: - directional pad, - analog sticks (including clicks), - X, Y, A, B, - start and select (or menu and capture), - shoulder buttons, and - rumble. The trackpad, touchscreen, volume controls, and power button are already supported via existing kernel modules. Two of the face buttons, the gyroscopes, rear paddles, and LEDs are not. After this patch lands, the Legion Go will be mostly functional in Linux, out-of-the-box. The various components of the USB hub can be synthesized into a single logical controller (including the additional buttons) in userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which makes the Go fully functional. Signed-off-by: Brenton Simpson <appsforartists@google.com> Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-30lsm: fix default return value of the socket_getpeersec_*() hooksOndrej Mosnacek
For these hooks the true "neutral" value is -EOPNOTSUPP, which is currently what is returned when no LSM provides this hook and what LSMs return when there is no security context set on the socket. Correct the value in <linux/lsm_hooks.h> and adjust the dispatch functions in security/security.c to avoid issues when the BPF LSM is enabled. Cc: stable@vger.kernel.org Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> [PM: subject line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-01-30efi/libstub: Add one kernel-doc commentYang Li
Add the description of @memory_type to silence the warning: drivers/firmware/efi/libstub/alignedmem.c:27: warning: Function parameter or struct member 'memory_type' not described in 'efi_allocate_pages_aligned' Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> [ardb: tweak comment] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-01-30x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDRArd Biesheuvel
The EFI stub's kernel placement logic randomizes the physical placement of the kernel by taking all available memory into account, and picking a region at random, based on a random seed. When KASLR is disabled, this seed is set to 0x0, and this results in the lowest available region of memory to be selected for loading the kernel, even if this is below LOAD_PHYSICAL_ADDR. Some of this memory is typically reserved for the GFP_DMA region, to accommodate masters that can only access the first 16 MiB of system memory. Even if such devices are rare these days, we may still end up with a warning in the kernel log, as reported by Tom: swapper/0: page allocation failure: order:10, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0 Fix this by tweaking the random allocation logic to accept a low bound on the placement, and set it to LOAD_PHYSICAL_ADDR. Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot") Reported-by: Tom Englund <tomenglund26@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218404 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-01-30soc: apple: mailbox: error pointers are negative integersLinus Torvalds
In an entirely unrelated discussion where I pointed out a stupid thinko of mine, Rasmus piped up and noted that that obvious mistake already existed elsewhere in the kernel tree. An "error pointer" is the negative error value encoded as a pointer, making the whole "return error or valid pointer" use-case simple and straightforward. We use it all over the kernel. But the key here is that errors are _negative_ error numbers, not the horrid UNIX user-level model of "-1 and the value of 'errno'". The Apple mailbox driver used the positive error values, and thus just returned invalid normal pointers instead of actual errors. Of course, the reason nobody ever noticed is that the errors presumably never actually happen, so this is fixing a conceptual bug rather than an actual one. Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/all/5c30afe0-f9fb-45d5-9333-dd914a1ea93a@prevas.dk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-01-30dm writecache: allow allocations larger than 2GiBMikulas Patocka
The function kvmalloc_node limits the allocation size to INT_MAX. This limit will be overflowed if dm-writecache attempts to map a device with 1TiB or larger length. This commit changes kvmalloc_array to vmalloc_array to avoid the limit. The commit also changes vmalloc(array_size()) to vmalloc_array(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-30dm stats: limit the number of entriesMikulas Patocka
The kvmalloc function fails with a warning if the size is larger than INT_MAX. Linus said that there should be limits that prevent this warning from being hit. This commit adds the limits to the dm-stats subsystem in DM core. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-30dm: limit the number of targets and parameter size areaMikulas Patocka
The kvmalloc function fails with a warning if the size is larger than INT_MAX. The warning was triggered by a syscall testing robot. In order to avoid the warning, this commit limits the number of targets to 1048576 and the size of the parameter area to 1073741824. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-01-30phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRPTony Lindgren
If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-30dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEVFrank Li
is_slave_direction() should return true when direction is DMA_DEV_TO_DEV. Fixes: 49920bc66984 ("dmaengine: add new enum dma_transfer_direction") Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240123172842.3764529-1-Frank.Li@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-30parisc: Fix random data corruption from exception handlerHelge Deller
The current exception handler implementation, which assists when accessing user space memory, may exhibit random data corruption if the compiler decides to use a different register than the specified register %r29 (defined in ASM_EXCEPTIONTABLE_REG) for the error code. If the compiler choose another register, the fault handler will nevertheless store -EFAULT into %r29 and thus trash whatever this register is used for. Looking at the assembly I found that this happens sometimes in emulate_ldd(). To solve the issue, the easiest solution would be if it somehow is possible to tell the fault handler which register is used to hold the error code. Using %0 or %1 in the inline assembly is not posssible as it will show up as e.g. %r29 (with the "%r" prefix), which the GNU assembler can not convert to an integer. This patch takes another, better and more flexible approach: We extend the __ex_table (which is out of the execution path) by one 32-word. In this word we tell the compiler to insert the assembler instruction "or %r0,%r0,%reg", where %reg references the register which the compiler choosed for the error return code. In case of an access failure, the fault handler finds the __ex_table entry and can examine the opcode. The used register is encoded in the lowest 5 bits, and the fault handler can then store -EFAULT into this register. Since we extend the __ex_table to 3 words we can't use the BUILDTIME_TABLE_SORT config option any longer. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v6.0+
2024-01-30kselftest/seccomp: Report each expectation we assert as a KTAP testMark Brown
The seccomp benchmark test makes a number of checks on the performance it measures and logs them to the output but does so in a custom format which none of the automated test runners understand meaning that the chances that anyone is paying attention are slim. Let's additionally log each result in KTAP format so that automated systems parsing the test output will see each comparison as a test case. The original logs are left in place since they provide the actual numbers for analysis. As part of this rework the flow for the main program so that when we skip tests we still log all the tests we skip, this is because the standard KTAP headers and footers include counts of the number of expected and run tests. Tested-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-01-30kselftest/seccomp: Use kselftest output functions for benchmarkMark Brown
In preparation for trying to output the test results themselves in TAP format rework all the prints in the benchmark to use the kselftest output functions. The uses of system() all produce single line output so we can avoid having to deal with fully managing the child process and continue to use system() by simply printing an empty message before we invoke system(). We also leave one printf() used to complete a line of output in place. Tested-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-01-30selftests/livepatch: fix and refactor new dmesg message codeJoe Lawrence
The livepatching kselftests rely on comparing expected vs. observed dmesg output. After each test, new dmesg entries are determined by the 'comm' utility comparing a saved, pre-test copy of dmesg to post-test dmesg output. Alexander reports that the 'comm --nocheck-order -13' invocation used by the tests can be confused when dmesg entry timestamps vary in magnitude (ie, "[ 98.820331]" vs. "[ 100.031067]"), in which case, additional messages are reported as new. The unexpected entries then spoil the test results. Instead of relying on 'comm' or 'diff' to determine new testing dmesg entries, refactor the code: - pre-test : log a unique canary dmesg entry - test : run tests, log messages - post-test : filter dmesg starting from pre-test message Reported-by: Alexander Gordeev <agordeev@linux.ibm.com> Closes: https://lore.kernel.org/live-patching/ZYAimyPYhxVA9wKg@li-008a6a4c-3549-11b2-a85c-c5cc2836eea2.ibm.com/ Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Tested-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-01-30spi: sh-msiof: avoid integer overflow in constantsWolfram Sang
cppcheck rightfully warned: drivers/spi/spi-sh-msiof.c:792:28: warning: Signed integer overflow for expression '7<<29'. [integerOverflow] sh_msiof_write(p, SIFCTR, SIFCTR_TFWM_1 | SIFCTR_RFWM_1); Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://msgid.link/r/20240130094053.10672-1-wsa+renesas@sang-engineering.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-30regulator (max5970): Fix IRQ handlerPatrick Rudolph
The max5970 datasheet gives the impression that IRQ status bits must be cleared by writing a one to set bits, as those are marked with 'R/C', however tests showed that a zero must be written. Fixes an IRQ storm as the interrupt handler actually clears the IRQ status bits. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Link: https://msgid.link/r/20240130150257.3643657-1-naresh.solanki@9elements.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-30x86/fpu: Stop relying on userspace for info to fault in xsave bufferAndrei Vagin
Before this change, the expected size of the user space buffer was taken from fx_sw->xstate_size. fx_sw->xstate_size can be changed from user-space, so it is possible construct a sigreturn frame where: * fx_sw->xstate_size is smaller than the size required by valid bits in fx_sw->xfeatures. * user-space unmaps parts of the sigrame fpu buffer so that not all of the buffer required by xrstor is accessible. In this case, xrstor tries to restore and accesses the unmapped area which results in a fault. But fault_in_readable succeeds because buf + fx_sw->xstate_size is within the still mapped area, so it goes back and tries xrstor again. It will spin in this loop forever. Instead, fault in the maximum size which can be touched by XRSTOR (taken from fpstate->user_size). [ dhansen: tweak subject / changelog ] Fixes: fcb3635f5018 ("x86/fpu/signal: Handle #PF in the direct restore path") Reported-by: Konstantin Bogomolov <bogomolov@google.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@google.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20240130063603.3392627-1-avagin%40google.com
2024-01-30USB: serial: qcserial: add new usb-id for Dell Wireless DW5826eJackBB Wu
Add support for Dell DW5826e with USB-id 0x413c:0x8217 & 0x413c:0x8218. It is 0x413c:0x8217 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8217 Rev= 5.04 S: Manufacturer=DELL S: Product=COMPAL Electronics EXM-G1A S: SerialNumber=359302940050401 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=qcserial E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms It is 0x413c:0x8218 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8218 Rev= 0.00 S: Manufacturer=DELL S: Product=COMPAL Electronics EXM-G1A S: SerialNumber=359302940050401 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: JackBB Wu <wojackbb@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-01-30USB: serial: cp210x: add ID for IMST iM871A-USBLeonard Dallmayr
The device IMST USB-Stick for Smart Meter is a rebranded IMST iM871A-USB Wireless M-Bus USB-adapter. It is used to read wireless water, gas and electricity meters. Signed-off-by: Leonard Dallmayr <leonard.dallmayr@mailbox.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-01-30tools include UAPI: Sync linux/mount.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: 35e27a5744131996 ("fs: keep struct mnt_id_req extensible") b4c2bea8ceaa50cd ("add listmount(2) syscall") 46eae99ef73302f9 ("add statmount(2) syscall") That doesn't change anything in tools this time as nothing that is harvested by the beauty scripts got changed: $ ls -1 tools/perf/trace/beauty/*mount*sh tools/perf/trace/beauty/fsmount.sh tools/perf/trace/beauty/mount_flags.sh tools/perf/trace/beauty/move_mount_flags.sh $ This addresses this perf build warning. Warning: Kernel ABI header differences: diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/ZbkMiB7ZcOsLP2V5@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-01-30perf evlist: Fix evlist__new_default() for > 1 core PMUJames Clark
The 'Session topology' test currently fails with this message when evlist__new_default() opens more than one event: 32: Session topology : --- start --- templ file: /tmp/perf-test-vv5YzZ Using CPUID 0x00000000410fd070 Opening: unknown-hardware:HG ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xb00000000 disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4 Opening: unknown-hardware:HG ------------------------------------------------------------ perf_event_attr: type 0 (PERF_TYPE_HARDWARE) config 0xa00000000 disabled 1 ------------------------------------------------------------ sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5 non matching sample_type FAILED tests/topology.c:73 can't get session ---- end ---- Session topology: FAILED! This is because when re-opening the file and parsing the header, Perf expects that any file that has more than one event has the sample ID flag set. Perf record already sets the flag in a similar way when there is more than one event, so add the same logic to evlist__new_default(). evlist__new_default() is only currently used in tests, so I don't expect this change to have any other side effects. The other tests that use it don't save and re-open the file so don't hit this issue. The session topology test has been failing on Arm big.LITTLE platforms since commit 251aa040244a3b17 ("perf parse-events: Wildcard most "numeric" events") when evlist__new_default() started opening multiple events for 'cycles'. Fixes: 251aa040244a3b17 ("perf parse-events: Wildcard most "numeric" events") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: James Clark <james.clark@arm.com> [ This was failing as well on a Rocket Lake Refresh/14700k Intel hybrid system - Arnaldo ] Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ian Rogers <irogers@google.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong1@huawei.com> Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/ Link: https://lore.kernel.org/r/20240124094358.489372-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-01-30tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'Arnaldo Carvalho de Melo
This is to get the changes from: 94ea9c05219518ef ("x86/headers: Replace #include <asm/export.h> with #include <linux/export.h>") 10f4c9b9a33b7df0 ("x86/asm: Fix build of UML with KASAN") That addresses these perf tools build warning: Warning: Kernel ABI header differences: diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/lkml/ZbkIKpKdNqOFdMwJ@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-01-30ALSA: pcm: Add missing formats to formats listIvan Orlov
Add 4 missing formats to 'snd_pcm_format_names' array in order to be able to get their names with 'snd_pcm_format_name' function. Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20240125223522.1122765-1-ivan.orlov0322@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-30ALSA: hda: cs35l41: Support ASUS Zenbook UM3402YARChhayly Leang
Adds sound support for ASUS Zenbook UM3402YAR with missing DSD Signed-off-by: Chhayly Leang <clw.leang@gmail.com> Link: https://lore.kernel.org/r/20240126080912.87422-1-clw.leang@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-30tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, ↵Arnaldo Carvalho de Melo
Zen, APIC MSR fence changes To pick the changes from: 1e536e10689700e0 ("x86/cpu: Detect TDX partial write machine check erratum") 765a0542fdc7aad7 ("x86/virt/tdx: Detect TDX during kernel boot") 30fa92832f405d5a ("x86/CPU/AMD: Add ZenX generations flags") 04c3024560d3a14a ("x86/barrier: Do not serialize MSR accesses on AMD") This causes these perf files to be rebuilt and brings some X86_FEATURE that will be used when updating the copies of tools/arch/x86/lib/mem{cpy,set}_64.S with the kernel sources: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header differences: diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kai Huang <kai.huang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-01-30ALSA: hda: cs35l41: Support additional ASUS Zenbook UX3402VAKenzo Gomez
Add new model entry into configuration table. Signed-off-by: Kenzo Gomez <kenzo.sgomez@gmail.com> Link: https://lore.kernel.org/r/20240127164621.26431-1-kenzo.sgomez@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-30dt-bindings: power: Add r8a779h0 SYSC power domain definitionsDuy Nguyen
Add power domain indices for the Renesas R-Car V4M (R8A779H0) SoC. Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/c5cbef71178cada761e9da7bcbb6f21334f93ef8.1706194617.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-30dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M supportDuy Nguyen
Document support for the System Controller (SYSC) in the R-Car V4M (R8A779H0) SoC. Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/6315cbd0b6e9b92a7914d98f397a2c663ad521c6.1706194617.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-12 11:57:03 +0000