summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-02-17powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boardsAnton Vorontsov
This patch adds NOR Flash, LEDs and PIB support for MPC8568E-MDS boards. Plus, move bcsr node into localbus node, and add bcsr5 gpio-controller node. Some platform code modifications were also needed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17powerpc/86xx: Enable VME driver on the GE SBC610Martyn Welch
Enable the VME driver (which is currently in staging) on the SBC610. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17powerpc/86xx: Enable VME driver on the GE PPC9AMartyn Welch
Enable the VME driver (which is currently in staging) on the PPC9A Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17powerpc/86xx: Add MSI section to GE PPC9A DTSMalcolm Crossley
Add the MSI section to the DTS file for the GE PPC9A. Signed-off-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17powerpc/86xx: Switch on highmem support on GE SBC610Martyn Welch
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17powerpc/86xx: Basic flash support for GE SBC610Martyn Welch
Support for the SBC610 VPX Single Board Computer from GE (PowerPC MPC8641D). This patch adds basic support for the on-board flash. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17powerpc/86xx: Add MSI section to GE SBC610 DTSMalcolm Crossley
Add the MSI section to the DTS file for the GE SBC610. Signed-off-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17powerpc/86xx: Fix GE SBC310 XMC site supportMalcolm Crossley
Correction to interrupt map mask for GE SBC310 XMC site and addition of alias. Signed-off-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17powerpc/86xx: Add MSI section to GE SBC310 DTSMartyn Welch
Add the MSI section to the DTS file for the GE SBC310. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17powerpc/fsl-booke: replace a hardcoded constantSebastian Andrzej Siewior
24 is offset between the opcode past bl and past rfi. This makes it more obvious. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17IPv6: convert mc_lock to spinlockStephen Hemminger
Only used for writing, so convert to spinlock Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/tehuti.c: Reapply use DEFINE_PCI_DEVICE_TABLE()Joe Perches
Commit 865a21a5e3d1b384c559a44c898fcad93e187b82 overwrote commit a3aa18842a5303fc28fcc4d57dbd16618bd830a0 Fix it. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/yellowfin.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Convert formats like %8.8 to %08 Remove periods from formats Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17x86, setup: When restoring the screen, update boot_params.screen_infoH. Peter Anvin
When we restore the screen content after a mode change, we return the cursor to its former position. However, we need to also update boot_params.screen_info accordingly, so that the decompression code knows where on the screen the cursor is. Just in case the video BIOS does something extra screwy, read the cursor position back from the BIOS instead of relying on it doing the right thing. While we're at it, make sure we cap the cursor position to the new screen coordinates. Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Bugzilla-Reference: http://bugzilla.kernel.org/show_bug.cgi?id=15329 Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-17drivers/net/sky2.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/skge.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Checkpatch cleaning Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/skge.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/pci-skeleton.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Checkpatch cleaning Convert formats like 0x%08x to %#08x Remove periods from formats Coalesce long formats Use print_hex_dump Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/cnic.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Remove periods from formats Coalesce long formats Use __func__ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/cassini.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Remove periods from formats Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/bnx2x: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert struct bnx2x member msglevel to msg_enable for netif_msg_<foo> macros Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/bnx2.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Remove periods from formats Coalesce long formats Coalesce some printks Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/b44.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Remove periods from formats Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/8139too.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Convert formats like %8.8 to %08 Remove periods from formats Coalesce long formats Use print_hex_dump Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/8139cp.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Remove periods from formats Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Update version to 3.108Matt Carlson
This patch updates the tg3 version to 3.108. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Push phylib definitions to phylibMatt Carlson
This patch pushes phylib definitions out to phylib headers. For phy IDs, this removes some code duplication. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Rename tg3 phy ID preprocessor definitionsMatt Carlson
The phylib presents the phy ID in a different format than the one tg3 has traditionally used. To highlight the distinction, this patch prepends the tg3 native phy ID format with TG3. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Reformat SSID to phy ID tableMatt Carlson
This patch reformats the SSID to phy ID table, replacing constants with preprocessor definitions. This patch is also prep work for the following patch, which will push line lengths beyond 80 chars. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Discover phy address onceMatt Carlson
The phy address will not change after it has been identified. Move the discovery code to a location that only gets executed once. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Reduce indent level of tg3_rx_prodring_allocMatt Carlson
This patch adds an inverted "jumbo ring enable" test and jumps to the exit if it succeeds. The change reduces the indent level of the remaining code making it more readable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Rename TG3_FLG3_RGMII_STD_IBND_DISABLEMatt Carlson
The STD part of this preprocessor definition is a bit of a misnomer. This flag is a coarse control of the RGMII inband status facilities. This patch renames the definition to be more accurate. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Add more partno entries for fallback pathMatt Carlson
This patch adds 57765 asic partno entries for the path executed if VPD is not present in NVRAM. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Allow phylib flowctrl changes anytimeMatt Carlson
This patch loosens the restriction that the phylib interface must be up and running to change the flow control parameters. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Add support for 2 new selfboot formatsMatt Carlson
This patch adds new offsets to the bootcode version extraction code to support NVRAM format versions 4 and 5. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Make 57791 and 57795 10/100 onlyMatt Carlson
This patch adds the 57791 and 57795 to the list of devices that only support 10 and 100 Mbps speeds. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Enforce DMA mapping / skb assignment orderingMatt Carlson
Michael Chan noted that there is nothing in the code that would prevent the compiler from delaying the access of the "mapping" member of the newly arrived packet until much later. If this happened after the skb = NULL assignment, it is possible for the driver to pass a bad dma_addr value to pci_unmap_single(). To enforce this ordering, we need a write memory barrier. The pairing read memory barrier already exists in tg3_rx_prodring_xfer() under the comments starting with "Ensure that updates to the...". Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17omap3: SDRC: add timing data for Numonyx M65KxxxxAMEnric Balletbo i Serra
Add timing data for the Numonyx M65KxxxxAM SDRAM chip, used on the IGEP v2 board. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: Add support for flash on IGEP v2 boardEnric Balletbo i Serra
This patch adds support for flashes on IGEP v2 boards. For now only OneNAND is supported. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: Enable DSS2 for IGEP v2 boardEnric Balletbo i Serra
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: Add platform init code for EHCI driver on IGEP v2Enric Balletbo i Serra
Add platform init code for EHCI driver on IGEP v2 Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: Fix typo on IGEP v2 boardEnric Balletbo i Serra
Fix typo on IGEP v2 board Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: Add platform data for the twl4030_codec MFD on IGEP v2Enric Balletbo i Serra
Add platform data for the twl4030_codec MFD on IGEP v2 Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: pandora: update defconfigGrazvydas Ignotas
Enable DSS2 and update defconfig for current kernel. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: pandora: update regulator setupGrazvydas Ignotas
Update pandora's regulator setup: - add new regulators: VAUX2, VAUX4 and VSIM - add new consumers: ads7846, nub controllers, USB PHY, audio DAC - use dev names instead of struct device pointers Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17OMAP: pandora: add DSS2 support and related regulatorsGrazvydas Ignotas
This patch adds configuration data for DSS2 and sets up display related regulators. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3evm: Configure GPIO175 for touchscreen PEN_IRQSanjeev Premi
GPIO175 is used for PEN_IRQ on the EVM. This patch sets the mux settings for the same. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3evm: Fixes after moving to matrix_keypadSanjeev Premi
The keypad was not working properly after migrating to matrix_keypad. Swapped the row, col fields of the KEY() macro in the keymap definition to get it working again. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3evm: Add mux settings for keypadSanjeev Premi
This patch sets SYS_NIRQ for keypad input. It also sets the same as a wakeup event from OFF mode. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17sparc: Fix incorrect comparison in of_bus_ambapp_match()Kristoffer Glembo
Use type instead of name in comparison. Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-20 15:52:26 +0000