summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-31Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The bulk is in-kernel pointer authentication, activity monitors and lots of asm symbol annotations. I also queued the sys_mremap() patch commenting the asymmetry in the address untagging. Summary: - In-kernel Pointer Authentication support (previously only offered to user space). - ARM Activity Monitors (AMU) extension support allowing better CPU utilisation numbers for the scheduler (frequency invariance). - Memory hot-remove support for arm64. - Lots of asm annotations (SYM_*) in preparation for the in-kernel Branch Target Identification (BTI) support. - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU init callbacks, support for new DT compatibles. - IPv6 header checksum optimisation. - Fixes: SDEI (software delegated exception interface) double-lock on hibernate with shared events. - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm() converted to C, cpufeature finalisation helper. - sys_mremap() comment explaining the asymmetric address untagging behaviour" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) mm/mremap: Add comment explaining the untagging behaviour of mremap() arm64: head: Convert install_el2_stub to SYM_INNER_LABEL arm64: Introduce get_cpu_ops() helper function arm64: Rename cpu_read_ops() to init_cpu_ops() arm64: Declare ACPI parking protocol CPU operation if needed arm64: move kimage_vaddr to .rodata arm64: use mov_q instead of literal ldr arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH lkdtm: arm64: test kernel pointer authentication arm64: compile the kernel with ptrauth return address signing kconfig: Add support for 'as-option' arm64: suspend: restore the kernel ptrauth keys arm64: __show_regs: strip PAC from lr in printk arm64: unwind: strip PAC from kernel addresses arm64: mask PAC bits of __builtin_return_address arm64: initialize ptrauth keys for kernel booting task arm64: initialize and switch ptrauth kernel keys arm64: enable ptrauth earlier arm64: cpufeature: handle conflicts based on capability arm64: cpufeature: Move cpu capability helpers inside C file ...
2020-03-31net: dsa: ksz: Select KSZ protocol tagCodrin Ciubotariu
KSZ protocol tag is needed by the KSZ DSA drivers. Fixes: 0b9f9dfbfab4 ("dsa: Allow tag drivers to be built as modules") Tested-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-31Merge tag 'microblaze-v5.7-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull microblaze updates from Michal Simek: - convert license headers to SPDX - cleanup header handling and use asm-generic one - get rid of earlyprintk residues - define barriers and use it in the code - get rid of setup_irq() for timer - various small addons and fixes * tag 'microblaze-v5.7-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Replace setup_irq() by request_irq() microblaze: Stop printing the virtual memory layout microblaze: Use asm generic cmpxchg.h for !SMP case microblaze: Define percpu sestion in linker file microblaze: Remove unused boot_cpuid variable microblaze: Add missing irqflags.h header microblaze: Add sync to tlb operations microblaze: Define microblaze barrier microblaze: Remove empty headers microblaze: Remove early printk setup microblaze: Remove architecture tlb.h and use generic one microblaze: Convert headers to SPDX license microblaze: Fix _reset() function microblaze: Kernel parameters should be parsed earlier
2020-03-31pcmcia: remove some unused space charactersHu Haowen
There are a few space characters I found by chance. I think they are redundant, so I removed them. Signed-off-by: Hu Haowen <xianfengting221@163.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2020-03-31drm/amd/display: increase HDCP authentication delayBhawanpreet Lakha
[Why] Some displays have an issue where the hdcp chips are initialized after the display has already lit up. This means we can sometimes authentication too early and cause authentication failures. This happens when HDCP is enabled and the display is power cycled. Normally we will authenticate 2 seconds after the display is lit, but some displays need a bit more time. [How] Increase delay to 3 second before we start authentication. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Correctly cancel future watchdog and callback eventsBhawanpreet Lakha
[Why] -We need to cancel future callbacks/watchdogs events when a callback/watchdog event happens [How] -fix typo in event_callback() -cancel callback, not watchdog -cancel watchdog events in event_watchdog_timer(). Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Don't try hdcp1.4 when content_type is set to type1Bhawanpreet Lakha
[Why] When content type property is set to 1. We should enable hdcp2.2 and if we cant then stop. Currently the way it works in DC is that if we fail hdcp2, we will try hdcp1 after. [How] Use link config to force disable hdcp1.4 when type1 is set. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31libnvdimm/region: Fix build errorYueHaibing
On CONFIG_PPC32=y build fails: drivers/nvdimm/region_devs.c:1034:14: note: in expansion of macro ‘do_div’ remainder = do_div(per_mapping, mappings); ^~~~~~ In file included from ./arch/powerpc/include/generated/asm/div64.h:1:0, from ./include/linux/kernel.h:18, from ./include/asm-generic/bug.h:19, from ./arch/powerpc/include/asm/bug.h:109, from ./include/linux/bug.h:5, from ./include/linux/scatterlist.h:7, from drivers/nvdimm/region_devs.c:5: ./include/asm-generic/div64.h:243:22: error: passing argument 1 of ‘__div64_32’ from incompatible pointer type [-Werror=incompatible-pointer-types] __rem = __div64_32(&(n), __base); \ Use div_u64 instead of do_div to fix this. Fixes: 2522afb86a8c ("libnvdimm/region: Introduce an 'align' attribute") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200331115024.31628-1-yuehaibing@huawei.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-03-31drm/amd/powerplay: move the ASIC specific nbio operation out of smu_v11_0.cEvan Quan
This is ASIC specific and should be placed in _ppt.c of each ASIC. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/powerplay: drop redundant BIF doorbell interrupt operationsEvan Quan
This is already done in soc15.c. And this is really ASIC specific and should not be placed here. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Fix dcn21 num_statesDmytro Laktyushkin
[Why] DML expects num_states to exclude the duplicate state. [How] Set num_states to correct value to prevent array off-by-one error. Also refactor max clock level code for diags. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Enable BT2020 in COLOR_ENCODING propertyStylon Wang
[Why] BT2020 is not supported in COLOR_ENCODING property of planes. Only BT601 and BT709 was available. [How] Allow BT2020 as legit value in setting COLOR_ENCODING property. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: LFC not working on 2.0x range monitors (v2)Aric Cyr
[Why] Nominal pixel clock and EDID information differ in precision so although monitor reports maximum refresh is 2x minimum, LFC was not being enabled. [How] Use minimum refresh rate as nominal/2 when EDID dictates that min refresh = max refresh/2. v2: squash in 64 bit divide fix Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Support plane level CTMStylon Wang
[Why] CTM was only supported at CRTC level and we need color space conversion in linear space at plane level. [How] - Add plane-level CTM to dc interface - Program plane-level CTM in DCN Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Revert change to HDCP display statesIsabel Zhang
[Why] Change is causing a regression where the OPC app no longer functions properly. [How] Revert the changelist causing the issue. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Not doing optimize bandwidth if flip pending.Yongqiang Sun
[Why] In some scenario like 1366x768 VSR enabled connected with a 4K monitor and playing 4K video in clone mode, underflow will be observed due to decrease dppclk when previouse surface scan isn't finished [How] In this use case, surface flip is switching between 4K and 1366x768, 1366x768 needs smaller dppclk, and when decrease the clk and previous surface scan is for 4K and scan isn't done, underflow will happen. Not doing optimize bandwidth in case of flip pending. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Use double buffered DRR timing update by defaultNicholas Kazlauskas
[Why] For some monitors extreme flickering can occur while using LFC for if we're not doing the DRR timing update for V_TOTAL_MIN / V_TOTAL_MAX at the DP start of frame. Hardware can default to any time in the frame which isn't the behavior we want. [How] Add a new function for setting the double buffering mode for DRR timing. Default to DP start of frame double buffering on timing generator init. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Support P010 pixel formatStylon Wang
[Why] P010 pixel format is not declared as supported in DRM and DM. [How] Add P010 format to the support list presented to DRM and checked in DM Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amd/display: Update function to get optimal number of tapsEric Bernstein
[Why] Diagnostics scaling test failing to set required number of vertical taps in 4:2:0 surface case [How] In dpp3_get_optimal_number_of_taps() need to use LB_MEMORY_CONFIG_3 for 4:2:0 surface case. In resource_build_scaling_params() make sure to also set plane res alpha enable based on updated surface state Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31drm/amdgpu: fix hpd bo size calculation errorKevin Wang
the HPD bo size calculation error. the "mem.size" can't present actual BO size all time. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <Christian.Koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-31Merge tag 'please-pull-ia64_for_5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 updates from Tony Luck: "Couple of cleanup patches" * tag 'please-pull-ia64_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: tty/serial: cleanup after ioc*_serial driver removal ia64: replace setup_irq() by request_irq()
2020-03-31Merge tag 'gvt-next-fixes-2020-03-31' of https://github.com/intel/gvt-linux ↵Rodrigo Vivi
into drm-intel-next-fixes gvt-next-fixes-2020-03-31 - Fix non-privilege access warning (Tina) - Fix display port type (Tina) - BDW cmd parser missed SWTESS_BASE_ADDRESS (Yan) - Bypass length check of LRI (Yan) - Fix one klocwork warning (Tina) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200331070025.GB16629@zhen-hp.sh.intel.com
2020-04-01csky: Enable the gcov functionMa Jun
Support the gcov function in csky architecture. Signed-off-by: Ma Jun <majun258@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2020-04-01csky: Fixup get wrong psr value from phyical regGuo Ren
We should get psr value from regs->psr in stack, not directly get it from phyiscal register then save the vector number in tsk->trap_no. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-04-01Makefile: Update kselftest help informationShuah Khan
Update kselftest help information. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-31nvme-tcp: don't poll a non-live queueSagi Grimberg
In error recovery we might be removing the queue so check we can actually poll before we do. Reported-by: Mark Wunderlich <mark.wunderlich@intel.com> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-03-31nvme-tcp: fix possible crash in write_zeroes processingSagi Grimberg
We cannot look at blk_rq_payload_bytes without first checking that the request has a mappable physical segments first (e.g. blk_rq_nr_phys_segments(rq) != 0) and only then to take the request payload bytes. This caused us to send a wrong sgl to the target or even dereference a non-existing buffer in case we actually got to the data send sequence (if it was in-capsule). Reported-by: Tony Asleson <tasleson@redhat.com> Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-03-31Merge tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS updates from Thomas Bogendoerfer: - loongson64 irq rework - dmi support loongson - replace setup_irq() by request_irq() - jazz cleanups - minor cleanups and fixes * tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits) MIPS: ralink: mt7621: Fix soc_device introduction MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3 MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC MAINTAINERS: Update Loongson64 entry MIPS: Loongson64: Load built-in dtbs MIPS: Loongson64: Add generic dts dt-bindings: mips: Add loongson boards MIPS: Loongson64: Drop legacy IRQ code dt-bindings: interrupt-controller: Add Loongson-3 HTPIC irqchip: Add driver for Loongson-3 HyperTransport PIC controller dt-bindings: interrupt-controller: Add Loongson LIOINTC irqchip: loongson-liointc: Workaround LPC IRQ Errata irqchip: Add driver for Loongson I/O Local Interrupt Controller docs: mips: remove no longer needed au1xxx_ide.rst documentation MIPS: Alchemy: remove no longer used au1xxx_ide.h header ide: remove no longer used au1xxx-ide driver MIPS: Add support for Desktop Management Interface (DMI) firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START MIPS: ralink: mt7621: introduce 'soc_device' initialization ...
2020-03-31Merge tag 'm68k-for-v5.7-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - pagetable layout rewrite, to facilitate global READ_ONCE() rework - Zorro (Amiga) and DIO (HP 9000/300) bus cleanups - defconfig updates - minor cleanups and fixes * tag 'm68k-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (23 commits) m68k: defconfig: Update defconfigs for v5.6-rc4 zorro: Replace zero-length array with flexible-array member m68k: Switch to asm-generic/hardirq.h fbdev: c2p: Use BUILD_BUG() instead of custom solution dio: Remove unused dio_dev_driver() dio: Fix dio_bus_match() kerneldoc dio: Make dio_match_device() static zorro: Move zorro_bus_type to bus-private header file zorro: Remove unused zorro_dev_driver() zorro: Use zorro_match_device() helper in zorro_bus_match() zorro: Fix zorro_bus_match() kerneldoc zorro: Make zorro_match_device() static m68k: Fix Kconfig indentation m68k: mm: Change ColdFire pgtable_t m68k: mm: Fully initialize the page-table allocator m68k: mm: Extend table allocator for multiple sizes m68k: mm: Use table allocator for pgtables m68k: mm: Improve kernel_page_table() m68k: mm: Restructure Motorola MMU page-table layout m68k: mm: Move the pointer table allocator to motorola.c ...
2020-03-31xfs: remove redundant variable assignment in xfs_symlink()Kaixu Xia
The variables 'udqp' and 'gdqp' have been initialized, so remove redundant variable assignment in xfs_symlink(). Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-31xfs: ratelimit inode flush on buffered write ENOSPCDarrick J. Wong
A customer reported rcu stalls and softlockup warnings on a computer with many CPU cores and many many more IO threads trying to write to a filesystem that is totally out of space. Subsequent analysis pointed to the many many IO threads calling xfs_flush_inodes -> sync_inodes_sb, which causes a lot of wb_writeback_work to be queued. The writeback worker spends so much time trying to wake the many many threads waiting for writeback completion that it trips the softlockup detector, and (in this case) the system automatically reboots. In addition, they complain that the lengthy xfs_flush_inodes scan traps all of those threads in uninterruptible sleep, which hampers their ability to kill the program or do anything else to escape the situation. If there's thousands of threads trying to write to files on a full filesystem, each of those threads will start separate copies of the inode flush scan. This is kind of pointless since we only need one scan, so rate limit the inode flush. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-03-31drm/mm: revert "Break long searches in fragmented address spaces"Christian König
This reverts commit 7be1b9b8e9d1e9ef0342d2e001f44eec4030aa4d. The drm_mm is supposed to work in atomic context, so calling schedule() or in this case cond_resched() is illegal. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/359278/
2020-03-31i2c: rcar: clean up after refactoring i2c_timingsWolfram Sang
The pointer is not really needed anymore since we have the timings struct available in the function itself now. Remove the pointer and access the struct directly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-31PCI: pciehp: Fix MSI interrupt raceStuart Hayes
Without this commit, a PCIe hotplug port can stop generating interrupts on hotplug events, so device adds and removals will not be seen: The pciehp interrupt handler pciehp_isr() reads the Slot Status register and then writes back to it to clear the bits that caused the interrupt. If a different interrupt event bit gets set between the read and the write, pciehp_isr() returns without having cleared all of the interrupt event bits. If this happens when the MSI isn't masked (which by default it isn't in handle_edge_irq(), and which it will never be when MSI per-vector masking is not supported), we won't get any more hotplug interrupts from that device. That is expected behavior, according to the PCIe Base Spec r5.0, section 6.7.3.4, "Software Notification of Hot-Plug Events". Because the Presence Detect Changed and Data Link Layer State Changed event bits can both get set at nearly the same time when a device is added or removed, this is more likely to happen than it might seem. The issue was found (and can be reproduced rather easily) by connecting and disconnecting an NVMe storage device on at least one system model where the NVMe devices were being connected to an AMD PCIe port (PCI device 0x1022/0x1483). Fix the issue by modifying pciehp_isr() to loop back and re-read the Slot Status register immediately after writing to it, until it sees that all of the event status bits have been cleared. [lukas: drop loop count limitation, write "events" instead of "status", don't loop back in INTx and poll modes, tweak code comment & commit msg] Link: https://lore.kernel.org/r/78b4ced5072bfe6e369d20e8b47c279b8c7af12e.1582121613.git.lukas@wunner.de Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2020-03-31PCI: pciehp: Fix indefinite wait on sysfs requestsLukas Wunner
David Hoyer reports that powering pciehp slots up or down via sysfs may hang: The call to wait_event() in pciehp_sysfs_enable_slot() and _disable_slot() does not return because ctrl->ist_running remains true. This flag, which was introduced by commit 157c1062fcd8 ("PCI: pciehp: Avoid returning prematurely from sysfs requests"), signifies that the IRQ thread pciehp_ist() is running. It is set to true at the top of pciehp_ist() and reset to false at the end. However there are two additional return statements in pciehp_ist() before which the commit neglected to reset the flag to false and wake up waiters for the flag. That omission opens up the following race when powering up the slot: * pciehp_ist() runs because a PCI_EXP_SLTSTA_PDC event was requested by pciehp_sysfs_enable_slot() * pciehp_ist() turns on slot power via the following call stack: pciehp_handle_presence_or_link_change() -> pciehp_enable_slot() -> __pciehp_enable_slot() -> board_added() -> pciehp_power_on_slot() * after slot power is turned on, the link comes up, resulting in a PCI_EXP_SLTSTA_DLLSC event * the IRQ handler pciehp_isr() stores the event in ctrl->pending_events and returns IRQ_WAKE_THREAD * the IRQ thread is already woken (it's bringing up the slot), but the genirq code remembers to re-run the IRQ thread after it has finished (such that it can deal with the new event) by setting IRQTF_RUNTHREAD via __handle_irq_event_percpu() -> __irq_wake_thread() * the IRQ thread removes PCI_EXP_SLTSTA_DLLSC from ctrl->pending_events via board_added() -> pciehp_check_link_status() in order to deal with presence and link flaps per commit 6c35a1ac3da6 ("PCI: pciehp: Tolerate initially unstable link") * after pciehp_ist() has successfully brought up the slot, it resets ctrl->ist_running to false and wakes up the sysfs requester * the genirq code re-runs pciehp_ist(), which sets ctrl->ist_running to true but then returns with IRQ_NONE because ctrl->pending_events is empty * pciehp_sysfs_enable_slot() is finally woken but notices that ctrl->ist_running is true, hence continues waiting The only way to get the hung task going again is to trigger a hotplug event which brings down the slot, e.g. by yanking out the card. The same race exists when powering down the slot because remove_board() likewise clears link or presence changes in ctrl->pending_events per commit 3943af9d01e9 ("PCI: pciehp: Ignore Link State Changes after powering off a slot") and thereby may cause a re-run of pciehp_ist() which returns with IRQ_NONE without resetting ctrl->ist_running to false. Fix by adding a goto label before the teardown steps at the end of pciehp_ist() and jumping to that label from the two return statements which currently neglect to reset the ctrl->ist_running flag. Fixes: 157c1062fcd8 ("PCI: pciehp: Avoid returning prematurely from sysfs requests") Link: https://lore.kernel.org/r/cca1effa488065cb055120aa01b65719094bdcb5.1584530321.git.lukas@wunner.de Reported-by: David Hoyer <David.Hoyer@netapp.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Cc: stable@vger.kernel.org # v4.19+
2020-03-31drm/xen: fix passing zero to 'PTR_ERR' warningDing Xiang
Fix a static code checker warning: drivers/gpu/drm/xen/xen_drm_front.c:404 xen_drm_drv_dumb_create() warn: passing zero to 'PTR_ERR' Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1585562347-30214-1-git-send-email-dingxiang@cmss.chinamobile.com
2020-03-31dt-bindings: vendor-prefixes: Add TopwisePascal Roeleven
Topwise Communication Co,. Ltd. is a company based in Shenzhen. They manufacture all kind of products but seem to be focusing on POS nowadays. Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31of: of_private.h: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31docs: dt: fix a broken reference to input.yamlMauro Carvalho Chehab
The old file was converted to yaml, but its reference was still pointing to the old one. Fixes: 7cef1079e3ad ("dt-bindings: input: Add common input binding in json-schema") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31docs: dt: fix references to ap806-system-controller.txtMauro Carvalho Chehab
ap806-system-controller.txt was renamed to ap80x-system-controller.txt. Update its references accordingly. Fixes: 2537831bbc19 ("dt-bindings: ap80x: replace AP806 with AP80x") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31docs: dt: fix references to m_can.txt fileMauro Carvalho Chehab
This file was converted to json and renamed. Update its references accordingly. Fixes: 824674b59f72 ("dt-bindings: net: can: Convert M_CAN to json-schema") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: pwm: renesas-tpu: Document more R-Car Gen2 supportGeert Uytterhoeven
All R-Car Gen2 SoCs have a Renesas Timer Pulse Unit. Document support for the missing variants. No driver change is needed due to the fallback compatible string. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: Add cros-ec Type C port driverPrashant Malani
Some Chrome OS devices with Embedded Controllers (EC) can read and modify Type C port state. Add an entry in the DT Bindings documentation that lists out the logical device and describes the relevant port information, to be used by the corresponding driver. Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: leds: common: fix example for gpio-ledsJohan Jonker
The preferred form for gpio-leds compatible subnodes is: ^led-[0-9a-f]$ Fix example by changing led0 and led1 to led-0 and led-1. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: interrupt-controller: msi: Correct msi-controller@c's regBin Meng
The base address of msi-controller@c should be set to c. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: spi: Add interconnect binding for QSPIAkash Asthana
Add documentation for the interconnect and interconnect-names properties for QSPI. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: spi: Convert QSPI bindings to YAMLAkash Asthana
Convert QSPI bindings to DT schema format using json-schema. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: thermal: rcar-thermal: Convert bindings to json-schemaNiklas Söderlund
Convert Renesas R-Car Thermal bindings documentation to json-schema. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: phy: Convert phy-mmp3-usb to json-schemaLubomir Rintel
A rather straightforward conversion of the phy-mmp3-usb binding to DT schema format using json-schema. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> [robh: add additionalProperties] Signed-off-by: Rob Herring <robh@kernel.org>
2020-03-31dt-bindings: Add "mrvl", a legacy vendor prefix for MarvellLubomir Rintel
While the preferred vendor prefix is "marvell", "mrvl" is used by many older bindings already. Add it, while also marking it deprecated. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Rob Herring <robh@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-16 08:27:46 +0000