summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-20ide: remove unnecessary touch_softlockup_watchdogGuoqing Jiang
Call touch_softlockup_watchdog before touch_nmi_watchdog is not needed, since touch_softlockup_watchdog is called inside touch_nmi_watchdog. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20ide: tx4939ide: Fix the name used in a 'devm_request_mem_region()' callChristophe JAILLET
This should be "tx4939ide" instead of "tx4938ide", but here MODNAME is even better. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20Merge branch 'mlxsw-SPAN-egress-mirroring-buffer-size'David S. Miller
Ido Schimmel says: ==================== mlxsw: Adjust SPAN egress mirroring buffer size handling for Spectrum-2 Jiri says: For Spectrum-2 the computation of SPAN egress mirroring buffer uses a different formula. On top of MTU it needs also current port speed. Fix the computation and also trigger the buffer size set according to PUDE event, which happens when port speed changes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20spectrum: Add a delayed work to update SPAN buffsize according to speedJiri Pirko
When PUDE event is handled and the link is up, update the port SPAN buffer size according to the current speed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20mlxsw: spectrum: Fix SPAN egress mirroring buffer size for Spectrum-2Jiri Pirko
For SPAN egress mirroring buffer size, it is needed to use a different formula for Spectrum and Spectrum-2. Move the buffer size computation to ops and implement new formula for Spectrum-2. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20mlxsw: spectrum_span: Put buffsize update code into helper functionJiri Pirko
Avoid duplication of code that is doing buffsize update and put it into a separate helper function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20mlxsw: spectrum: Push code getting port speed into a helperJiri Pirko
Currently PTP code queries directly PTYS register for port speed from work scheduled upon PUDE event. Since the speed needs to be used for SPAN buffer size computation as well, push the code into a separate helper. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20pwm: sun4i: Narrow scope of local variableUwe Kleine-König
The variable pval is only used in a single block in the function sun4i_pwm_calculate(). So declare it in a more local scope to simplify the function for humans and compilers. While at it also simplify assignment to pval. While the diffstat for this patch is negative for this patch I still thing the advantage of having a narrower scope is beneficial. In my compiler / .config setup (gcc 8.2.1, arm/imx_v6_v7_defconfig + COMPILE_TEST + PWM_SUN4I) this change doesn't result in any binary changes. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: bcm2835: Allow building for ARCH_BRCMSTBFlorian Fainelli
BCM7211 is supported using ARCH_BRCMSTB and uses this PWM controller driver, make it possible to build it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: imx27: Eliminate error message for defer probeAnson Huang
For defer probe error, no need to output error message which will cause confusion. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERRGustavo A. R. Silva
Fix inconsistent IS_ERR and PTR_ERR in sun4i_pwm_probe(). The proper pointers to be passed as arguments are pwm->clk and pwm->bus_clk. This bug was detected with the help of Coccinelle. Fixes: b8d74644f34a ("pwm: sun4i: Prefer "mod" clock to unnamed") Fixes: 5b090b430d75 ("pwm: sun4i: Add an optional probe for bus clock") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20hsr: Fix a compilation errorxiaofeng.yan
A compliation error happen when building branch 5.5-rc7 In file included from net/hsr/hsr_main.c:12:0: net/hsr/hsr_main.h:194:20: error: two or more data types in declaration specifiers static inline void void hsr_debugfs_rename(struct net_device *dev) So Removed one void. Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed") Signed-off-by: xiaofeng.yan <yanxiaofeng7@jd.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20pwm: sun4i: Move pwm_calculate() out of spin_lock()Clément Péron
pwm_calculate() calls clk_get_rate() while holding a spin_lock(). This create an issue as clk_get_rate() may sleep. Move pwm_calculate() out of this spin_lock(). Fixes: c32c5c50d4fe ("pwm: sun4i: Switch to atomic PWM") Reported-by: Alexander Finger <alex.mobigo@gmail.com> Sugested-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Alexander Finger <alex.mobigo@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: omap-dmtimer: Allow compiling with COMPILE_TESTUwe Kleine-König
The dependency on OMAP_DM_TIMER is only a runtime dependency. Also OMAP_DM_TIMER cannot be enabled without ARCH_OMAP being enabled. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: omap-dmtimer: put_device() after of_find_device_by_node()Uwe Kleine-König
This was found by coccicheck: drivers/pwm/pwm-omap-dmtimer.c:304:2-8: ERROR: missing put_device; call of_find_device_by_node on line 255, but without a corresponding object release within this function. Reported-by: Markus Elfring <elfring@users.sourceforge.net> Fixes: 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: omap-dmtimer: Simplify error handlingUwe Kleine-König
Instead of doing error handling in the middle of ->probe(), move error handling and freeing the reference to timer to the end. This fixes a resource leak as dm_timer wasn't freed when allocating *omap failed. Implementation note: The put: label was never reached without a goto and ret being unequal to 0, so the removed return statement is fine. Fixes: 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctionalUwe Kleine-König
In the old code (e.g.) mutex_destroy() was called before pwmchip_remove(). Between these two calls it is possible that a PWM callback is used which tries to grab the mutex. Fixes: 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: Implement tracing for .get_state() and .apply_state()Uwe Kleine-König
This allows to log all calls to the driver's lowlevel functions which simplifies debugging in some cases. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: rcar: Document inability to set duty_cycle = 0Uwe Kleine-König
When .apply() is called with state->duty_cycle = 0 the duty_ns parameter to rcar_pwm_set_counter() is 0 which results in ph being 0 and rcar_pwm_set_counter() returning -EINVAL. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: rcar: Drop useless call to pwm_get_state()Uwe Kleine-König
pwm_get_state has no side effects and the resulting pwm_state is unused. So drop the call to pwm_get_state() and the local variable from rcar_pwm_apply(). The call was introduced in commit 7f68ce8287d3 ("pwm: rcar: Add support "atomic" API") and already then was useless. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20mmc: sdhci-of-esdhc: fix serious issue clock is always disabledYangbo Lu
This patch is to fix a serious issue that clock is always disabled in esdhc_of_set_clock(). Fixes: 1b21a701aed9 ("mmc: sdhci-of-esdhc: fix clock setting for different controller versions") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20200120094835.28050-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-of-esdhc: fix transfer mode register readingYangbo Lu
The standard SD controller uses two 16-bit registers for command sending. 0xC: Transfer Mode Register 0xE: Command Register But the eSDHC controller uses one 32-bit register instead. 0xC: XFERTYPE For Transfer Mode Register and Command Register writing, the eSDHC driver will store Transfer Mode Register value in a variable first. When Command Register writing happens, driver will directly write a 32-bit value into XFERTYPE register. But for Transfer Mode Register reading, driver just returns a actual value. This may cause issue for some read-modify-write operations. We should make both reading and write on that variable for Transfer Mode Register. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20200117063858.37296-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Fix incorrect switch to HS modeAl Cooper
When switching from any MMC speed mode that requires 1.8v (HS200, HS400 and HS400ES) to High Speed (HS) mode, the system ends up configured for SDR12 with a 50MHz clock which is an illegal mode. This happens because the SDHCI_CTRL_VDD_180 bit in the SDHCI_HOST_CONTROL2 register is left set and when this bit is set, the speed mode is controlled by the SDHCI_CTRL_UHS field in the SDHCI_HOST_CONTROL2 register. The SDHCI_CTRL_UHS field will end up being set to 0 (SDR12) by sdhci_set_uhs_signaling() because there is no UHS mode being set. The fix is to change sdhci_set_uhs_signaling() to set the SDHCI_CTRL_UHS field to SDR25 (which is the same as HS) for any switch to HS mode. This was found on a new eMMC controller that does strict checking of the speed mode and the corresponding clock rate. It caused the switch to HS400 mode to fail because part of the sequence to switch to HS400 requires a switch from HS200 to HS before going to HS400. This issue was previously fixed by commit c894e33ddc191 ("mmc: sdhci: Fix incorrect switch to HS mode") and later removed by commit 07bcc411567c ("Revert \"mmc: sdhci: Fix incorrect switch to HS mode\"") because it caused failures with some SD cards on AM65X systems. The fix will now be done in a platform specific callback instead of common sdhci code. Signed-off-by: Al Cooper <alcooperx@gmail.com> Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200113210706.11972-7-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)Al Cooper
The latest Arasan controller first used in the 7216 now supports CQE so enable this feature. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-6-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Add shutdown callbackAl Cooper
Shutdown controller and disable it's clocks to insure max power savings in S5 on systems that leave power on. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-5-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Fix driver to defer on clk_get deferAl Cooper
The new SCMI clock protocol driver does not get probed that early in boot. Brcmstb drivers typically have the following code when getting a clock: priv->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(priv->clk)) { dev_err(&pdev->dev, "Clock not found in Device Tree\n"); priv->clk = NULL; } This commit changes the driver to do what is below. priv->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(priv->clk)) { if (PTR_ERR(priv->clk) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_err(&pdev->dev, "Clock not found in Device Tree\n"); priv->clk = NULL; } Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-4-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-brcmstb: Add ability to use HS400ES transfer modeAl Cooper
The latest eMMC JEDEC specification version 5.1 added a new transfer mode, HS400 with enhanced strobe (HS400ES). This mode will be selected if both the host controller and eMMC device support it. The latest Arasan 5.1 controller in the 7216a0 supports this mode. The "Host Controller Specification" has not been updated so the controller register bit used to enable this mode is not specified and varies the with controller vendor. The Linux SDHCI driver supplies a callback for enabling HS400ES mode and that callback will be used to supply a routine that will set the proper bit in the Arasan Vendor register. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-3-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0Al Cooper
Add 7216b0 with supports CQE, HS400, HS400-ES and SDR104. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-2-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: core: limit probe clock frequency to configured f_maxMichał Mirosław
Currently MMC core disregards host->f_max during card initialization phase. Obey upper boundary for the clock frequency and skip faster speeds when they are above the limit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/f471bceaf237d582d746bd289c4c4f3639cb7b45.1577962382.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-milbeaut: Remove redundant platform_get_irq error messageYueHaibing
platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116144322.57308-1-yuehaibing@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: fix an issue of mixing different typesChunyan Zhang
Fix an issue reported by sparse, since mixed types of parameters are used on calling dmaengine_prep_slave_sg(). Fixes: 36e1da441fec (mmc: sdhci: add support for using external DMA devices) Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200120033223.897-1-zhang.chunyan@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20Merge branch 'for-linus' into for-nextTakashi Iwai
Resolved the merge conflict in HD-audio Tegra driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-20ALSA: hda: Apply aligned MMIO access only conditionallyTakashi Iwai
It turned out that the recent simplification of HD-audio bus access helpers caused a regression on the virtual HD-audio device on QEMU with ARM platforms. The driver got a CORB/RIRB timeout and couldn't probe any codecs. The essential difference that caused a problem was the enforced aligned MMIO accesses by simplification. Since snd-hda-tegra driver is enabled on ARM, it enables CONFIG_SND_HDA_ALIGNED_MMIO, which makes the all HD-audio drivers using the aligned MMIO accesses. While this is mandatory for snd-hda-tegra, it seems that snd-hda-intel on ARM gets broken by this access pattern. For addressing the regression, this patch introduces a new flag, aligned_mmio, to hdac_bus object, and applies the aligned MMIO only when this flag is set. This change affects only platforms with CONFIG_SND_HDA_ALIGNED_MMIO set, i.e. mostly only for ARM platforms. Unfortunately the patch became a big bigger than it should be, just because the former calls didn't take hdac_bus object in the argument, hence we had to extend the call patterns. Fixes: 19abfefd4c76 ("ALSA: hda: Direct MMIO accesses") BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1161152 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200120104127.28985-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-20clk: ti: clkctrl: Fix hidden dependency to node nameTony Lindgren
We currently have a hidden dependency to the device tree node name for the clkctrl clocks. Instead of using standard node name like "clock", we must use "l4-per-clkctrl" type naming so the clock driver can find the associated clock domain. Further, if "clk" is specified for a clock node name, the driver sets TI_CLK_CLKCTRL_COMPAT flag that uses different logic for the clock name based on the parent node name for the all the clkctrl clocks for the SoC. If the clock node naming dependency is not understood, the related clockdomain is not found, or a wrong one can get used if a clock manager has multiple clock domains. As each clkctrl instance represents a single clock domain, let's allow using domain specific compatible names to specify the clock domain. This simplifies things and removes the hidden dependency to the node name. And then later on, after the node names have been standardized, we can drop the related code for parsing the node names. Let's also update the binding to use standard "clock" node naming instead of "clk" and add the missing description for reg. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-20x86/sysfb: Fix check for bad VRAM sizeArvind Sankar
When checking whether the reported lfb_size makes sense, the height * stride result is page-aligned before seeing whether it exceeds the reported size. This doesn't work if height * stride is not an exact number of pages. For example, as reported in the kernel bugzilla below, an 800x600x32 EFI framebuffer gets skipped because of this. Move the PAGE_ALIGN to after the check vs size. Reported-by: Christopher Head <chead@chead.ca> Tested-by: Christopher Head <chead@chead.ca> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=206051 Link: https://lkml.kernel.org/r/20200107230410.2291947-1-nivedita@alum.mit.edu
2020-01-20Merge branch 'net-phy-add-generic-ndo_do_ioctl-handler-phy_do_ioctl'David S. Miller
Heiner Kallweit says: ==================== net: phy: add generic ndo_do_ioctl handler phy_do_ioctl A number of network drivers has the same glue code to use phy_mii_ioctl as ndo_do_ioctl handler. So let's add such a generic ndo_do_ioctl handler to phylib. As first user convert r8169. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20r8169: use generic ndo_do_ioctl handler phy_do_ioctlHeiner Kallweit
Replace rtl8169_ioctl with new generic function phy_do_ioctl. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20net: phy: add generic ndo_do_ioctl handler phy_do_ioctlHeiner Kallweit
A number of network drivers has the same glue code to use phy_mii_ioctl as ndo_do_ioctl handler. So let's add such a generic ndo_do_ioctl handler to phylib. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20Merge branch 'fixes' into nextUlf Hansson
2020-01-20platform/x86: asus-nb-wmi: Support left round button on N56VBPaul Cercueil
The N56VB laptop has a round button located on the left side above the keyboard. Map it to F13 since it does not have any predeterminated purpose. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Update versionSrinivas Pandruvada
As we added new set of mailbox commands, increment version. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Change the order for clos disableSrinivas Pandruvada
In turbo-freq or base-freq auto mode, for disable, first disable the feature and then disable clos. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Fix result display for turbo-freq auto modeSrinivas Pandruvada
The turbo-freq enable with auto mode, prints result for the last possible CPU, which is not correct when either CPU is not present or user wants command to be limited to a single die/package. For example, in the below command user wants to limit to die/package 0, but the "turbo-freq --auto" result is displayed using the other package. $ sudo intel-speed-select -c 0 turbo-freq enable -a Intel(R) Speed Select Technology package-0 die-0 cpu-0 turbo-freq enable:success package--1 die-0 cpu-31 turbo-freq --auto enable:success Since we do have to traverse all CPUs, don't display CPU info for "turbo-freq --auto", as we already displayed the result for turbo-freq enable with the CPU information. With the fix, the same command results in: $ sudo intel-speed-select -c 0 turbo-freq enable -a Intel(R) Speed Select Technology package-0 die-0 cpu-0 turbo-freq enable:success turbo-freq --auto enable:success Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20tools/power/x86/intel-speed-select: Add support for core-power discoverySrinivas Pandruvada
It is possible that BIOS may not enable core-power feature. In this case this additional interface will allow to enable from this utility. Also the information dump, includes the current status of core-power. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20platform/x86: ISST: Allow additional core-power mailbox commandsSrinivas Pandruvada
To discover core-power capability, some new mailbox commands are added. Allow those commands to execute. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20mmc: sdhci: fix minimum clock rate for v3 controllerMichał Mirosław
For SDHCIv3+ with programmable clock mode, minimal clock frequency is still base clock / max(divider). Minimal programmable clock frequency is always greater than minimal divided clock frequency. Without this patch, SDHCI uses out-of-spec initial frequency when multiplier is big enough: mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz [for 480 MHz source clock divided by 1024] The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode. Fixes: c3ed3877625f ("mmc: sdhci: add support for programmable clock mode") Cc: <stable@vger.kernel.org> # 4f6aa3264af4: mmc: tegra: Only advertise UHS modes if IO regulator is present Cc: <stable@vger.kernel.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add special reset capabilityFaiz Abbas
Some omap controllers need software to monitor a 0->1->0 for software reset. Add a SDHCI_OMAP_SPECIAL_RESET flag to indicate this. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-11-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add am335x and am437x specific compatiblesFaiz Abbas
Add support for new compatible for TI's am335x and am437x devices. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-10-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20dt-bindings: sdhci-omap: Add am335x and am437x specific bindingsFaiz Abbas
Add binding for the TI's sdhci-omap controller present in am335x and am437x devices. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200116105154.7685-9-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Disable data timeout interrupt during eraseFaiz Abbas
Disable data timeout interrupt during an erase operation. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-8-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-30 00:07:02 +0000