| Age | Commit message (Collapse) | Author |
|---|
|
Use preferred spi_get_device_match_data() instead of of_match_device() and
spi_get_device_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, clock configuration is spread throughout the driver and
partially duplicated for the STM32MP1 and STM32 MCU variants. This makes
it difficult to keep track of which clocks need to be enabled or disabled
in various scenarios.
This patch adds symmetric stm32_dwmac_clk_enable/disable() functions
that handle all clock configuration, including quirks required while
suspending or resuming. syscfg_clk and clk_eth_ck are not present on
STM32 MCUs, but it is fine to try to configure them anyway since NULL
clocks are ignored.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Amit Cohen says:
====================
Extend VXLAN driver to support FDB flushing
The merge commit 92716869375b ("Merge branch 'br-flush-filtering'") added
support for FDB flushing in bridge driver. Extend VXLAN driver to support
FDB flushing also. Add support for filtering by fields which are relevant
for VXLAN FDBs:
* Source VNI
* Nexthop ID
* 'router' flag
* Destination VNI
* Destination Port
* Destination IP
Without this set, flush for VXLAN device fails:
$ bridge fdb flush dev vx10
RTNETLINK answers: Operation not supported
With this set, such flush works with the relevant arguments, for example:
$ bridge fdb flush dev vx10 vni 5000 dst 193.2.2.1
< flush all vx10 entries with VNI 5000 and destination IP 193.2.2.1>
Some preparations are required, handle them before adding flushing support
in VXLAN driver. See more details in commit messages.
Patch set overview:
Patch #1 prepares flush policy to be used by VXLAN driver
Patches #2-#3 are preparations in VXLAN driver
Patch #4 adds an initial support for flushing in VXLAN driver
Patches #5-#9 add support for filtering by several attributes
Patch #10 adds a test for FDB flush with VXLAN
Patch #11 extends the test to check FDB flush with bridge
====================
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the test to check flushing with bridge device, test flush by device
and by VID.
Add test case for flushing with "self" and "master" and attributes that are
supported only in one driver, this is unrecommended configuration, check it
to verify that user gets an error.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test all the supported arguments for FDB flush. The test checks
configuration, not traffic. Note that the flag 'offloaded' is not checked
as it is not relevant when there is no hardware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for flush VXLAN FDB entries by destination IP. FDB entry is
stored as {MAC, SRC_VNI} + remote. The destination IP is an attribute of
the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.
In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination IP', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.
For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.3 self permanent
00:00:00:00:00:00 dst 192.1.1.1 self permanent
00:00:00:00:00:00 dst 192.1.1.2 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 1000 self permanent
When user flush by destination IP x, only the relevant remotes will be
flushed:
$ bridge fdb flush dev vx10 dst 192.1.1.1
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.3 self permanent
00:00:00:00:00:00 dst 192.1.1.2 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for flush VXLAN FDB entries by destination port. FDB entry
is stored as {MAC, SRC_VNI} + remote. The destination port is an attribute
of the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.
In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination port', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.
For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 port 1111 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 port 1111 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 port 2222 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
When user flush by port x, only the relevant remotes will be flushed:
$ bridge fdb flush dev vx10 port 1111
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 port 2222 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for flush VXLAN FDB entries by destination VNI. FDB entry is
stored as {MAC, SRC_VNI} + remote. The destination VNI is an attribute
of the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.
In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination VNI', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.
For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 4000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.2 vni 2000 self permanent
When user flush by VNI x, only the relevant remotes will be flushed:
$ bridge fdb flush dev vx10 vni 2000
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 4000 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for flush VXLAN FDB entries by nexthop ID.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for flush VXLAN FDB entries by source VNI.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The merge commit 92716869375b ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver only, the VXLAN driver does
not support such flushing. Extend VXLAN driver to support FDB flushing.
In this commit, add support for flushing with state and flags, which are
the fields that supported in the bridge driver.
Note that bridge driver supports 'NTF_USE' flag, but there is no point to
support this flag for flushing as it is ignored when flags are stored.
'NTF_STICKY' is not relevant for VXLAN driver.
'NTF_ROUTER' is not supported in bridge driver for flush as it is not
relevant for bridge, add it for VXLAN.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the function vxlan_flush() does not flush the default FDB entry
(an entry with all_zeros_mac and default VNI), as it is deleted at
vxlan_uninit(). When this function will be used for flushing FDB entries
from user space, it will have to flush also the default entry in case that
other parameters match (e.g., VNI, flags).
Extend 'struct vxlan_fdb_flush_desc' to include an indication whether
the default entry should be flushed or not. The default value (false)
indicates to flush it, adjust all the existing callers to set
'.ignore_default_entry' to true, so the current behavior will not be
changed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function vxlan_flush() gets a boolean called 'do_all' and in case
that it is false, it does not flush entries with state 'NUD_PERMANENT'
or 'NUD_NOARP'. The following patches will add support for FDB flush
with parameters from user space. Make the function more generic, so it
can be used later.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The merge commit 92716869375b ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver. The following patches
will extend VXLAN driver to support FDB flushing as well. The netlink
message for bulk delete is shared between the drivers. With the existing
implementation, there is no way to prevent user from flushing with
attributes that are not supported per driver. For example, when VNI will
be added, user will not get an error for flush FDB entries in bridge
with VNI, although this attribute is not relevant for bridge.
As preparation for support of FDB flush in VXLAN driver, move the policy
to be handled in bridge driver, later a new policy for VXLAN will be
added in VXLAN driver. Do not pass 'vid' as part of ndo_fdb_del_bulk(),
as this field is relevant only for bridge.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot complains about a race in xfrm_lookup_with_ifid() [1]
When preparing commit 0a9e5794b21e ("xfrm: annotate data-race
around use_time") I thought xfrm_lookup_with_ifid() was modifying
a still private structure.
[1]
BUG: KCSAN: data-race in xfrm_lookup_with_ifid / xfrm_lookup_with_ifid
write to 0xffff88813ea41108 of 8 bytes by task 8150 on cpu 1:
xfrm_lookup_with_ifid+0xce7/0x12d0 net/xfrm/xfrm_policy.c:3218
xfrm_lookup net/xfrm/xfrm_policy.c:3270 [inline]
xfrm_lookup_route+0x3b/0x100 net/xfrm/xfrm_policy.c:3281
ip6_dst_lookup_flow+0x98/0xc0 net/ipv6/ip6_output.c:1246
send6+0x241/0x3c0 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xbd/0x130 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
write to 0xffff88813ea41108 of 8 bytes by task 15867 on cpu 0:
xfrm_lookup_with_ifid+0xce7/0x12d0 net/xfrm/xfrm_policy.c:3218
xfrm_lookup net/xfrm/xfrm_policy.c:3270 [inline]
xfrm_lookup_route+0x3b/0x100 net/xfrm/xfrm_policy.c:3281
ip6_dst_lookup_flow+0x98/0xc0 net/ipv6/ip6_output.c:1246
send6+0x241/0x3c0 drivers/net/wireguard/socket.c:139
wg_socket_send_skb_to_peer+0xbd/0x130 drivers/net/wireguard/socket.c:178
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00000000651cd9d1 -> 0x00000000651cd9d2
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15867 Comm: kworker/u4:58 Not tainted 6.6.0-rc4-syzkaller-00016-g5e62ed3b1c8a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/06/2023
Workqueue: wg-kex-wg2 wg_packet_handshake_send_worker
Fixes: 0a9e5794b21e ("xfrm: annotate data-race around use_time")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, the core is msm and amdgpu with some scattered fixes
across vmwgfx, panel and the core stuff.
atomic-helper:
- Relax checks for unregistered connectors
dma-buf:
- Work around race condition when retrieving fence timestamp
gem:
- Avoid OOB access in BO memory range
panel:
- boe-tv101wun-ml6: Fix flickering
simpledrm:
- Fix error output
vwmgfx:
- Fix size calculation in texture-state code
- Ref GEM BOs in surfaces
msm:
- PHY/link training reset fix
- msm8998 - correct highest bank bit
- skip video mode if timing engine disabled
- check irq_of_parse_and_map return code
- add new lines to some prints
- fail atomic check for max mdp clk test
amdgpu:
- Seamless boot fix
- Fix TTM BO resource check
- SI fix for doorbell handling"
* tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm:
drm/tiny: correctly print `struct resource *` on error
drm: Do not overrun array in drm_gem_get_pages()
drm/atomic-helper: relax unregistered connector check
drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP term
drm/amdgpu: fix SI failure due to doorbells allocation
drm/amdgpu: add missing NULL check
drm/amd/display: Don't set dpms_off for seamless boot
drm/vmwgfx: Keep a gem reference to user bos in surfaces
drm/vmwgfx: fix typo of sizeof argument
drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits
dma-buf: add dma_fence_timestamp helper
drm/msm/dp: Add newlines to debug printks
drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
drm/msm/dsi: fix irq_of_parse_and_map() error checking
drm/msm/dsi: skip the wait for video mode done if not applicable
drm/msm/mdss: fix highest-bank-bit for msm8998
drm/msm/dp: do not reinitialize phy unless retry during link training
|
|
Fix new smatch warnings:
fs/smb/server/smb2pdu.c:6131 smb2_read_pipe() error: double free of 'rpc_resp'
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Coverity Scan report the following one. This report is a false alarm.
Because fp is never NULL when rc is zero. This patch add null check for fp
in ksmbd_update_fstate to make alarm silence.
*** CID 1568583: Null pointer dereferences (FORWARD_NULL)
/fs/smb/server/smb2pdu.c: 3408 in smb2_open()
3402 path_put(&path);
3403 path_put(&parent_path);
3404 }
3405 ksmbd_revert_fsids(work);
3406 err_out1:
3407 if (!rc) {
>>> CID 1568583: Null pointer dereferences (FORWARD_NULL)
>>> Passing null pointer "fp" to "ksmbd_update_fstate", which dereferences it.
3408 ksmbd_update_fstate(&work->sess->file_table, fp, FP_INITED);
3409 rc = ksmbd_iov_pin_rsp(work, (void *)rsp, iov_len);
3410 }
3411 if (rc) {
3412 if (rc == -EINVAL)
3413 rsp->hdr.Status = STATUS_INVALID_PARAMETER;
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
set_smb2_rsp_status() after __process_request() sets the wrong error
status. This patch resets all iov vectors and sets the error status
on clean one.
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Cthon test fail with the following error.
check for proper open/unlink operation
nfsjunk files before unlink:
-rwxr-xr-x 1 root root 0 9월 25 11:03 ./nfs2y8Jm9
./nfs2y8Jm9 open; unlink ret = 0
nfsjunk files after unlink:
-rwxr-xr-x 1 root root 0 9월 25 11:03 ./nfs2y8Jm9
data compare ok
nfsjunk files after close:
ls: cannot access './nfs2y8Jm9': No such file or directory
special tests failed
Cthon expect to second unlink failure when file is already unlinked.
ksmbd can not allow to open file if flags of ksmbd inode is set with
S_DEL_ON_CLS flags.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.6-2023-10-11:
amdgpu:
- Seemless boot fix
- Fix TTM BO resource check
- SI fix for doorbell handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012025637.7783-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.6-rc5
- fix to not reset the PHY everytime we start link training but only
do it if link training fails. Without this, the PLL unlocked
interrupt fires causing "Unexpected DP AUX IRQ 0x01000000 when
not busy" spam in the logs since last 2-3 cycles
- correct the highest bank bit to match downstream device tree for
msm8998
- skip the video mode wait if the timing engine is not enabled. This
was introduced after pre_enable flag for DSI video mode panels
where we would end up waiting for the video mode done interrupt
even before enabling timing engine causing error spam and long
bootup times.
- check the correct return code of irq_of_parse_and_map() in DSI code
- avoid overflow issues in the dpu bandwidth calculation . This was
exposed for high resolution displays and a critical fix to avoid
atomic_check failure
- minor fix to add new lines in DP print messages.
- Fix to fail atomic_check() if the resolution exceeds max mdp clk.
This leads to underflow otherwise if we try to allow that frame.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-HNxQ=VBtZ8geGzYJum9jtManEdbvhcjo_WWF_J9Ziw@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- qcom_battmgr: endianness fixes
* tag 'for-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: qcom_battmgr: fix enable request endianness
power: supply: qcom_battmgr: fix battery_id type
|
|
Pull block fix from Jens Axboe:
"Just a single fix for a longstanding regression with using fallocate
on a block device"
* tag 'block-6.6-2023-10-12' of git://git.kernel.dk/linux:
block: Don't invalidate pagecache for invalid falloc modes
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* atomic-helper: Relax checks for unregistered connectors
* dma-buf: Work around race condition when retrieving fence timestamp
* gem: Avoid OOB access in BO memory range
* panel:
* boe-tv101wun-ml6: Fix flickering
* simpledrm: Fix error output
* vwmgfx:
* Fix size calculation in texture-state code
* Ref GEM BOs in surfaces
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012111638.GA25037@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- In cgroup1, the `tasks` file could have duplicate pids which can
trigger a warning in seq_file. Fix it by removing duplicate items
after sorting
- Comment update
* tag 'cgroup-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix incorrect css_set_rwsem reference in comment
cgroup: Remove duplicates in cgroup v1 tasks file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Fix access-after-free in pwq allocation error path
- Implicitly ordered unbound workqueues should lose the implicit
ordering if an attribute change which isn't compatible with ordered
operation is requested. However, attribute changes requested through
the sysfs interface weren't doing that leaving no way to override the
implicit ordering through the sysfs interface. Fix it.
- Other doc and misc updates
* tag 'wq-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix -Wformat-truncation in create_worker
workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()
workqueue: Use the kmem_cache_free() instead of kfree() to release pwq
workqueue: doc: Fix function and sysfs path errors
workqueue: Fix UAF report by KASAN in pwq_release_workfn()
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c55 ("bpf: Fix verifier log for async callback return values")
a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 92e24e0e57f72e06c2df87116557331fd2d4dda2.
While the patch itself is correct, it uncovered an issue with fallback
to PS/2 mode, where we were leaving psmouse->fast_reconnect handler set
to psmouse_smbus_reconnect(), which caused crashes.
While discussing various approaches to fix the issue it was noted that
this patch ass undesired delay in the "fast" resume path of PS/2 device,
and it would be better to actually use "reset_delay" option defined in
struct rmi_device_platform_data and have RMI code handle it for SMBus
transport as well. So this patch is being reverted to deal with crashes
and a better solution will be merged shortly.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/all/ca0109fa-c64b-43c1-a651-75b294d750a1@leemhuis.info/
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") enabled
'-fstrict-flex-arrays=3' globally, but bindgen does not recognized this
compiler option, triggering the following build error:
error: unknown argument: '-fstrict-flex-arrays=3', err: true
[ Miguel: Commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3")
did it so only conditionally (i.e. only if the C compiler supports
it). This explains what Andrea was seeing: he was compiling with a
modern enough GCC, which enables the option, but with an old enough
Clang. Andrea confirmed this was the case: he was using Clang 14 with
GCC 13; and that Clang 15 worked for him.
While it is possible to construct code (see mailing list for an
example I came up with) where this could break, it is fairly
contrived, and anyway GCC-built kernels with Rust enabled should
only be used for experimentation until we get support for
`rustc_codegen_gcc` and/or GCC Rust. So let's add this for the
time being in case it helps somebody. ]
Add '-fstrict-flex-arrays' to the list of cflags that should be ignored
by bindgen.
Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20230815065346.131387-1-andrea.righi@canonical.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This patch fixes a trivial markdown style nit in the `SAFETY` comment.
Signed-off-by: Manmohan Shukla <manmshuk@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Jianguo Bao <roidinev@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Fixes: c7e20faa5fca ("rust: error: Add Error::to_ptr()")
Link: https://lore.kernel.org/r/20230906204857.85619-1-manmshuk@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
A mistake was made and the description of `ECHILD` is wrong (it reuses
the description of `ENOEXEC`). This fixes it to reflect what's in
`errno-base.h`.
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Finn Behrens <me@kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Fixes: 266def2a0f5b ("rust: error: add codes from `errno-base.h`")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230930144958.46051-1-wedsonaf@gmail.com
[ Use the plural, as noticed by Benno. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Just special case DP DSM connectors until we properly figure out how to
deal with this.
This resolves user regressions on GPUs with such connectors without
reverting the original fix.
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org # 6.4+
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/255
Fixes: 2b5d1c29f6c4 ("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011114134.861818-1-kherbst@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and BPF.
We have a regression in TC currently under investigation, otherwise
the things that stand off most are probably the TCP and AF_PACKET
fixes, with both issues coming from 6.5.
Previous releases - regressions:
- af_packet: fix fortified memcpy() without flex array.
- tcp: fix crashes trying to free half-baked MTU probes
- xdp: fix zero-size allocation warning in xskq_create()
- can: sja1000: always restart the tx queue after an overrun
- eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp
- eth: nfp: avoid rmmod nfp crash issues
- eth: octeontx2-pf: fix page pool frag allocation warning
Previous releases - always broken:
- mctp: perform route lookups under a RCU read-side lock
- bpf: s390: fix clobbering the caller's backchain in the trampoline
- phy: lynx-28g: cancel the CDR check work item on the remove path
- dsa: qca8k: fix qca8k driver for Turris 1.x
- eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()
- eth: ixgbe: fix crash with empty VF macvlan list"
* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
rswitch: Fix imbalance phy_power_off() calling
rswitch: Fix renesas_eth_sw_remove() implementation
octeontx2-pf: Fix page pool frag allocation warning
nfc: nci: assert requested protocol is valid
af_packet: Fix fortified memcpy() without flex array.
net: tcp: fix crashes trying to free half-baked MTU probes
net/smc: Fix pos miscalculation in statistics
nfp: flower: avoid rmmod nfp crash issues
net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
ethtool: Fix mod state of verbose no_mask bitset
net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
mctp: perform route lookups under a RCU read-side lock
net: skbuff: fix kernel-doc typos
s390/bpf: Fix unwinding past the trampoline
s390/bpf: Fix clobbering the caller's backchain in the trampoline
net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
net/smc: Fix dependency of SMC on ISM
ixgbe: fix crash with empty VF macvlan list
net/mlx5e: macsec: use update_pn flag instead of PN comparation
net: phy: mscc: macsec: reject PN update requests
...
|
|
Compiling with W=1 emitted the following warning
(Compiler: gcc (x86-64, ver. 13.2.1, .config: result of make allyesconfig,
"Treat warnings as errors" turned off):
kernel/workqueue.c:2188:54: warning: ‘%d’ directive output may be
truncated writing between 1 and 10 bytes into a region of size
between 5 and 14 [-Wformat-truncation=]
kernel/workqueue.c:2188:50: note: directive argument in the range
[0, 2147483647]
kernel/workqueue.c:2188:17: note: ‘snprintf’ output between 4 and 23 bytes
into a destination of size 16
setting "id_buf" to size 23 will silence the warning, since GCC
determines snprintf's output to be max. 23 bytes in line 2188.
Please let me know if there are any mistakes in my patch!
Signed-off-by: Lucy Mielke <lucymielke@icloud.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
workqueue_apply_unbound_cpumask()
Commit 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1
to be ordered") enabled implicit ordered attribute to be added to
WQ_UNBOUND workqueues with max_active of 1. This prevented the changing
of attributes to these workqueues leading to fix commit 0a94efb5acbb
("workqueue: implicit ordered attribute should be overridable").
However, workqueue_apply_unbound_cpumask() was not updated at that time.
So sysfs changes to wq_unbound_cpumask has no effect on WQ_UNBOUND
workqueues with implicit ordered attribute. Since not all WQ_UNBOUND
workqueues are visible on sysfs, we are not able to make all the
necessary cpumask changes even if we iterates all the workqueue cpumasks
in sysfs and changing them one by one.
Fix this problem by applying the corresponding change made
to apply_workqueue_attrs_locked() in the fix commit to
workqueue_apply_unbound_cpumask().
Fixes: 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Otherwise the different instances of _start_c from each compilation unit
will lead to linker errors:
/usr/bin/ld: /tmp/ccSNvRqs.o: in function `_start_c':
nolibc-test-foo.c:(.text.nolibc_memset+0x9): multiple definition of `_start_c'; /tmp/ccG25101.o:nolibc-test.c:(.text+0x1ea3): first defined here
Fixes: 17336755150b ("tools/nolibc: add new crt.h with _start_c")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20231012-nolibc-start_c-multiple-v1-1-fbfc73e0283f@weissschuh.net/
Link: https://lore.kernel.org/lkml/20231012-nolibc-linkage-test-v1-1-315e682768b4@weissschuh.net/
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
The nolibc tree moved out of Willys user namespace into its own.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20230916-nolibc-tree-v1-1-06c9b59a5035@weissschuh.net
|
|
The ABI mandates that the %esp register must be a multiple of 16 when
executing a 'call' instruction.
Commit 2ab446336b17 ("tools/nolibc: i386: shrink _start with _start_c")
simplified the _start function, but it didn't take care of the %esp
alignment, causing SIGSEGV on SSE and AVX programs that use aligned move
instruction (e.g., movdqa, movaps, and vmovdqa).
The 'and $-16, %esp' aligns the %esp at a multiple of 16. Then 'push
%eax' will subtract the %esp by 4; thus, it breaks the 16-byte
alignment. Make sure the %esp is correctly aligned after the push by
subtracting 12 before the push.
Extra:
Add 'add $12, %esp' before the 'and $-16, %esp' to avoid over-estimating
for particular cases as suggested by Willy.
A test program to validate the %esp alignment on _start can be found at:
https://lore.kernel.org/lkml/ZOoindMFj1UKqo+s@biznet-home.integral.gnuweeb.org
[ Thomas: trim Fixes tag commit id ]
Cc: Zhangjin Wu <falcon@tinylab.org>
Fixes: 2ab446336b17 ("tools/nolibc: i386: shrink _start with _start_c")
Reported-by: Nicholas Rosenberg <inori@vnlx.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Reviewed-by: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"AngeloGioacchino Del Regno is stepping in as co-maintainer for the
MediaTek SoC platform and starts by sending some dts fixes for the
mt8195 platform that had been pending for a while.
On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer,
reflecting that Linus Walleij has been handling this on his own for
the past few years.
Generic RISC-V kernels are now marked as incompatible with the RZ/Five
platform that requires custom hacks both for managing its DMA bounce
buffers and for addressing low virtual memory.
Finally, there is one bugfix for the AMDTEE firmware driver to prevent
a use-after-free bug"
* tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
IXP4xx MAINTAINERS entries
arm64: dts: mediatek: mt8195: Set DSU PMU status to fail
arm64: dts: mediatek: fix t-phy unit name
arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions
arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB
MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer
soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE
tee: amdtee: fix use-after-free vulnerability in amdtee_close_session
|
|
The following panic can happen when mmap is called before the pmu add
callback which sets the hardware counter index: this happens for example
with the following command `perf record --no-bpf-event -n kill`.
[ 99.461486] CPU: 1 PID: 1259 Comm: perf Tainted: G E 6.6.0-rc4ubuntu-defconfig #2
[ 99.461669] Hardware name: riscv-virtio,qemu (DT)
[ 99.461748] epc : pmu_sbi_set_scounteren+0x42/0x44
[ 99.462337] ra : smp_call_function_many_cond+0x126/0x5b0
[ 99.462369] epc : ffffffff809f9d24 ra : ffffffff800f93e0 sp : ff60000082153aa0
[ 99.462407] gp : ffffffff82395c98 tp : ff6000009a218040 t0 : ff6000009ab3a4f0
[ 99.462425] t1 : 0000000000000004 t2 : 0000000000000100 s0 : ff60000082153ab0
[ 99.462459] s1 : 0000000000000000 a0 : ff60000098869528 a1 : 0000000000000000
[ 99.462473] a2 : 000000000000001f a3 : 0000000000f00000 a4 : fffffffffffffff8
[ 99.462488] a5 : 00000000000000cc a6 : 0000000000000000 a7 : 0000000000735049
[ 99.462502] s2 : 0000000000000001 s3 : ffffffff809f9ce2 s4 : ff60000098869528
[ 99.462516] s5 : 0000000000000002 s6 : 0000000000000004 s7 : 0000000000000001
[ 99.462530] s8 : ff600003fec98bc0 s9 : ffffffff826c5890 s10: ff600003fecfcde0
[ 99.462544] s11: ff600003fec98bc0 t3 : ffffffff819e2558 t4 : ff1c000004623840
[ 99.462557] t5 : 0000000000000901 t6 : ff6000008feeb890
[ 99.462570] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[ 99.462658] [<ffffffff809f9d24>] pmu_sbi_set_scounteren+0x42/0x44
[ 99.462979] Code: 1060 4785 97bb 00d7 8fd9 9073 1067 6422 0141 8082 (9002) 0013
[ 99.463335] Kernel BUG [#2]
To circumvent this, try to enable userspace access to the hardware counter
when it is selected in addition to when the event is mapped. And vice-versa
when the event is stopped/unmapped.
Fixes: cc4c07c89aad ("drivers: perf: Implement perf event mmap support in the SBI backend")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231006082010.11963-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
ftrace creates entries for each syscall in the tracefs but has failed
since commit 08d0ce30e0e4 ("riscv: Implement syscall wrappers") which
prefixes all riscv syscalls with __riscv_.
So fix this by implementing arch_syscall_match_sym_name() which allows us
to ignore this prefix.
And also ignore compat syscalls like x86/arm64 by implementing
arch_trace_is_compat_syscall().
Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20231003182407.32198-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- imx: scu-pd: Correct the DMA2 channel
* tag 'pmdomain-v6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: scu-pd: correct DMA2 channel
|
|
If configuration options SOFTIRQ_ON_OWN_STACK and PREEMPT_RT
are enabled simultaneously under RISC-V architecture,
it will result in a compilation failure:
arch/riscv/kernel/irq.c:64:6: error: redefinition of 'do_softirq_own_stack'
64 | void do_softirq_own_stack(void)
| ^~~~~~~~~~~~~~~~~~~~
In file included from ./arch/riscv/include/generated/asm/softirq_stack.h:1,
from arch/riscv/kernel/irq.c:15:
./include/asm-generic/softirq_stack.h:8:20: note: previous definition of 'do_softirq_own_stack' was here
8 | static inline void do_softirq_own_stack(void)
| ^~~~~~~~~~~~~~~~~~~~
After changing CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK to CONFIG_SOFTIRQ_ON_OWN_STACK,
compilation can be successful.
Fixes: dd69d07a5a6c ("riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK")
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Jiexun Wang <wangjiexun@tinylab.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230913052940.374686-1-wangjiexun@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When testing on risc-v QEMU environment with "crashkernel="
parameter enabled, a problem occurred with the following
message:
[ 0.000000] crashkernel low memory reserved: 0xf8000000 - 0x100000000 (128 MB)
[ 0.000000] crashkernel reserved: 0x0000000177e00000 - 0x0000000277e00000 (4096 MB)
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:779 __insert_resource+0x8e/0xd0
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc2-next-20230920 #1
[ 0.000000] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000] epc : __insert_resource+0x8e/0xd0
[ 0.000000] ra : insert_resource+0x28/0x4e
[ 0.000000] epc : ffffffff80017344 ra : ffffffff8001742e sp : ffffffff81203db0
[ 0.000000] gp : ffffffff812ece98 tp : ffffffff8120dac0 t0 : ff600001f7ff2b00
[ 0.000000] t1 : 0000000000000000 t2 : 3428203030303030 s0 : ffffffff81203dc0
[ 0.000000] s1 : ffffffff81211e18 a0 : ffffffff81211e18 a1 : ffffffff81289380
[ 0.000000] a2 : 0000000277dfffff a3 : 0000000177e00000 a4 : 0000000177e00000
[ 0.000000] a5 : ffffffff81289380 a6 : 0000000277dfffff a7 : 0000000000000078
[ 0.000000] s2 : ffffffff81289380 s3 : ffffffff80a0bac8 s4 : ff600001f7ff2880
[ 0.000000] s5 : 0000000000000280 s6 : 8000000a00006800 s7 : 000000000000007f
[ 0.000000] s8 : 0000000080017038 s9 : 0000000080038ea0 s10: 0000000000000000
[ 0.000000] s11: 0000000000000000 t3 : ffffffff80a0bc00 t4 : ffffffff80a0bc00
[ 0.000000] t5 : ffffffff80a0bbd0 t6 : ffffffff80a0bc00
[ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[ 0.000000] [<ffffffff80017344>] __insert_resource+0x8e/0xd0
[ 0.000000] ---[ end trace 0000000000000000 ]---
[ 0.000000] Failed to add a Crash kernel resource at 177e00000
The crashkernel memory has been allocated successfully, whereas
it failed to insert into iomem_resource. This is due to the
unique reserving logic in risc-v arch specific code, i.e.
crashk_res/crashk_low_res will be added into iomem_resource
later in init_resources(), which is not aligned with current
unified reserving logic in reserve_crashkernel_{generic,low}()
and therefore leads to the failure of crashkernel reservation.
Removing the arch specific code within #ifdef CONFIG_KEXEC_CORE
in init_resources() to fix above problem.
Fixes: 31549153088e ("riscv: kdump: use generic interface to simplify crashkernel reservation")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230925024333.730964-1-chenjiahao16@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
There are two duplicate `-O binary` flags when objcopying from vmlinux
to Image/xipImage.
RISC-V set `-O binary` flag in both OBJCOPYFLAGS in the top-level riscv
Makefile and OBJCOPYFLAGS_* in the boot/Makefile, and the objcopy cmd
in Kbuild would join them together.
The `-O binary` flag is only needed for objcopying Image, so remove the
OBJCOPYFLAGS in the top-level riscv Makefile.
Fixes: c0fbcd991860 ("RISC-V: Build flat and compressed kernel images")
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230914091334.1458542-1-songshuaishuai@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Fei has reported that KASAN triggers during apply_alternatives() on
a 5-level paging machine:
BUG: KASAN: out-of-bounds in rcu_is_watching()
Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0
...
__asan_load4()
rcu_is_watching()
trace_hardirqs_on()
text_poke_early()
apply_alternatives()
...
On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57)
gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on
__VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled().
KASAN gets confused when apply_alternatives() patches the
KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START
static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue.
Fix it for real by disabling KASAN while the kernel is patching alternatives.
[ mingo: updated the changelog ]
Fixes: 6657fca06e3f ("x86/mm: Allow to boot without LA57 if CONFIG_X86_5LEVEL=y")
Reported-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231012100424.1456-1-kirill.shutemov@linux.intel.com
|
|
Although vf_vport entry of struct mlx5e_stats is never updated, its
values are mistakenly copied to the caller structure in the VF
representor .ndo_get_stat_64 callback mlx5e_rep_get_stats(). Remove
redundant entry and use the updated one, rep_stats, instead.
Fixes: 64b68e369649 ("net/mlx5: Refactor and expand rep vport stat group")
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the cited commit, if the routing device is ovs internal port, the
out device is set to uplink, and packets go out after encapsulation.
If filter device is uplink, it can trigger the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 3966): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xcdb051), err(-22)
Fix this issue by not offloading internal port if filter device is out
device. In this case, packets are not forwarded to the root table to
be processed, the termination table is used instead to forward them
from uplink to uplink.
Fixes: 100ad4e2d758 ("net/mlx5e: Offload internal port as encap route device")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
