| Age | Commit message (Collapse) | Author |
|---|
|
We already iterate the link bss_conf/link_info and have the
pointer, or know that deflink/bss_conf is used, so avoid an
extra lookup and just pass the pointer. This may also avoid
a crash when this is processed during restart, where the FW
to link conf array (link_id_to_link_conf) may be NULLed out.
Fixes: c1e458b987f2 ("wifi: iwlwifi: mvm: Move beacon filtering to be per link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240703064026.346a6ef67a86.Iba5d65d728ca9f58518c88d029496c1250670544@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since we now want to sync the queues even when we're in RFKILL, we
shouldn't wake up the wait queue since we still expect to get all the
notifications from the firmware.
Fixes: 4d08c0b3357c ("wifi: iwlwifi: mvm: handle BA session teardown in RF-kill")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240703064027.be7a9dbeacde.I5586cb3ca8d6e44f79d819a48a0c22351ff720c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK should be set based on the
WOWLAN_KEK_KCK_MATERIAL command version. Currently, the command
version in the firmware has advanced to 4, which prevents the
flag from being set correctly, fix that.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240703064026.a0f162108575.If1a9785727d2a1b0197a396680965df1b53d4096@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
made sure that the IEs data was manipulated under the relevant RCU section.
Unfortunately, while doing so, the commit brought a faulty implicit cast
from int to u8 on the ies_len variable, making the parsing fail to be
performed correctly if the IEs block is larger than 255 bytes. This failure
can be observed with Access Points appending a lot of IEs TLVs in their
beacon frames (reproduced with a Pixel phone acting as an Access Point,
which brough 273 bytes of IE data in my testing environment).
Fix IEs parsing by removing this undesired implicit cast.
Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jozef Hopko <jozef.hopko@altana.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240701-wilc_fix_ies_data-v1-1-7486cbacf98a@bootlin.com
|
|
The processing of a Transfer-In-Channel (TIC) CCW requires locating
the target of the CCW in the channel program, and updating the
address to reflect what will actually be sent to hardware.
An error exists where the 64-bit virtual address is truncated to
32-bits (variable "cda") when performing this math. Since s390
addresses of that size are 31-bits, this leaves that additional
bit enabled such that the resulting I/O triggers a channel
program check. This shows up occasionally when booting a KVM
guest from a passthrough DASD device:
..snip...
Interrupt Response Block Data:
: 0x0000000000003990
Function Ctrl : [Start]
Activity Ctrl :
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status :
Channel Status : [Program-Check]
cpa=: 0x00000000008d0018
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
...snip...
dasd-ipl: Failed to run IPL1 channel program
The channel program address of "0x008d0018" in the IRB doesn't
look wrong, but tracing the CCWs shows the offending bit enabled:
ccw=0x0000012e808d0000 cda=00a0b030
ccw=0x0000012e808d0008 cda=00a0b038
ccw=0x0000012e808d0010 cda=808d0008
ccw=0x0000012e808d0018 cda=00a0b040
Fix the calculation of the TIC CCW's data address such that it points
to a valid 31-bit address regardless of the input address.
Fixes: bd36cfbbb9e1 ("s390/vfio_ccw_cp: use new address translation helpers")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240628163738.3643513-1-farman@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
As David Laight noticed,
"In a multithreaded program it is reasonable to have a thread blocked in
accept(). With TCP a subsequent shutdown(listen_fd, SHUT_RDWR) causes
the accept to fail. But nothing happens for SCTP."
sctp_disconnect() is eventually called when shutdown a listen socket,
but nothing is done in this function. This patch sets RCV_SHUTDOWN
flag in sk->sk_shutdown there, and adds the check (sk->sk_shutdown &
RCV_SHUTDOWN) to break and return in sctp_accept().
Note that shutdown() is only supported on TCP-style SCTP socket.
Reported-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As described by the microchip article "LAN937X - The required
configuration for the external MAC port to operate at RGMII-to-RGMII
1Gbps link speed." [1]:
"When VPHY is enabled, the auto-negotiation process following IEEE 802.3
standard will be triggered and will result in RGMII-to-RGMII signal
failure on the interface because VPHY will try to poll the PHY status
that is not available in the scenario of RGMII-to-RGMII connection
(normally the link partner is usually an external processor).
Note that when VPHY fails on accessing PHY registers, it will fall back
to 100Mbps speed, it indicates disabling VPHY is optional if you only
need the port to link at 100Mbps speed.
Again, VPHY must and can only be disabled by writing VPHY_DISABLE bit in
the register below as there is no strapping pin for the control."
This patch was tested on LAN9372, so far it seems to not to affect VPHY
based clock crossing optimization for the ports with integrated PHYs.
[1]: https://microchip.my.site.com/s/article/LAN937X-The-required-configuration-for-the-external-MAC-port-to-operate-at-RGMII-to-RGMII-1Gbps-link-speed
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
interfaces
This driver do not support in-band mode and in case of CPU<->Switch
link, this mode is not working any way. So, disable it otherwise ingress
path of the switch MAC will stay disabled.
Note: lan9372 manual do not document 0xN301 BIT(2) for the RGMII mode
and recommend[1] to disable in-band link status update for the RGMII RX
path by clearing 0xN302 BIT(0). But, 0xN301 BIT(2) seems to work too, so
keep it unified with other KSZ switches.
[1] https://microchip.my.site.com/s/article/LAN937X-The-required-configuration-for-the-external-MAC-port-to-operate-at-RGMII-to-RGMII-1Gbps-link-speed
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On the LAN9371 and LAN9372, the 4th internal PHY is a 100BaseTX PHY
instead of a 100BaseT1 PHY. The 100BaseTX PHYs have a different base
register offset.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 750011e239a5 ("net: stmmac: Add support for HW-accelerated VLAN
stripping") enables MAC level VLAN tag stripping for all MAC cores, but
leaves set_hw_vlan_mode() and rx_hw_vlan() un-implemented for both gmac
and xgmac.
On gmac and xgmac, ethtool reports rx-vlan-offload is on, both MAC and
driver do nothing about VLAN packets actually, although VLAN works well.
Driver level stripping should be used on gmac and xgmac for now.
Fixes: 750011e239a5 ("net: stmmac: Add support for HW-accelerated VLAN stripping")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prep patches for Device Memory TCP
Pick up a couple of prep patches for Device Memory TCP which
stand on their own.
Link: https://patch.msgid.link/20240628003253.1694510-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support building the C YNL userspace library into one big static file.
We can then link selftests against it for easy to use C netlink
interface.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20240628003253.1694510-14-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Abstract the memory type from the page_pool so we can later add support
for new memory types. Convert the page_pool to use the new netmem type
abstraction, rather than use struct page directly.
As of this patch the netmem type is a no-op abstraction: it's always a
struct page underneath. All the page pool internals are converted to
use struct netmem instead of struct page, and the page pool now exports
2 APIs:
1. The existing struct page API.
2. The new struct netmem API.
Keeping the existing API is transitional; we do not want to refactor all
the current drivers using the page pool at once.
The netmem abstraction is currently a no-op. The page_pool uses
page_to_netmem() to convert allocated pages to netmem, and uses
netmem_to_page() to convert the netmem back to pages to pass to mm APIs,
Follow up patches to this series add non-paged netmem support to the
page_pool. This change is factored out on its own to limit the code
churn to this 1 patch, for ease of code review.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20240628003253.1694510-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__netif_rx()
The following is emitted when using idxd (DSA) dmanegine as the data
mover for ntb_transport that ntb_netdev uses.
[74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526
[74412.556784] caller is netif_rx_internal+0x42/0x130
[74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5
[74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024
[74412.581699] Call Trace:
[74412.584514] <TASK>
[74412.586933] dump_stack_lvl+0x55/0x70
[74412.591129] check_preemption_disabled+0xc8/0xf0
[74412.596374] netif_rx_internal+0x42/0x130
[74412.600957] __netif_rx+0x20/0xd0
[74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev]
[74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport]
[74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport]
[74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd]
[74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd]
[74412.634046] irq_thread_fn+0x21/0x60
[74412.638134] ? irq_thread+0xa8/0x290
[74412.642218] irq_thread+0x1a0/0x290
[74412.646212] ? __pfx_irq_thread_fn+0x10/0x10
[74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10
[74412.656117] ? __pfx_irq_thread+0x10/0x10
[74412.660686] kthread+0x100/0x130
[74412.664384] ? __pfx_kthread+0x10/0x10
[74412.668639] ret_from_fork+0x31/0x50
[74412.672716] ? __pfx_kthread+0x10/0x10
[74412.676978] ret_from_fork_asm+0x1a/0x30
[74412.681457] </TASK>
The cause is due to the idxd driver interrupt completion handler uses
threaded interrupt and the threaded handler is not hard or soft interrupt
context. However __netif_rx() can only be called from interrupt context.
Change the call to netif_rx() in order to allow completion via normal
context for dmaengine drivers that utilize threaded irq handling.
While the following commit changed from netif_rx() to __netif_rx(),
baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context."),
the change should've been a noop instead. However, the code precedes this
fix should've been using netif_rx_ni() or netif_rx_any_context().
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Reported-by: Jerry Dai <jerry.dai@intel.com>
Tested-by: Jerry Dai <jerry.dai@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20240701181538.3799546-1-dave.jiang@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The header is missing the include guards so add them.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: fb470f70fea7 ("net: phy: aquantia: add hwmon support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20240701080322.9569-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"One single patch to fix the non-contiguous CBM resctrl:
- AMD supports non-contiguous CBM but does not report it via CPUID.
This test should not use CPUID on AMD to detect non-contiguous CBM
support. Fix the problem so the test uses CPUID to discover
non-contiguous CBM support only on Intel"
* tag 'linux_kselftest-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/resctrl: Fix non-contiguous CBM for AMD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- Improve handling of deep ancestor chains in is_subdir()
- Release locks cleanly when fctnl_setlk() races with close().
When setting a file lock fails the VFS tries to cleanup the already
created lock. The helper used for this calls back into the LSM
layer which may cause it to fail, leaving the stale lock accessible
via /proc/locks.
AFS:
- Fix a comma/semicolon typo"
* tag 'vfs-6.10-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Convert comma to semicolon
fs: better handle deep ancestor chains in is_subdir()
filelock: Remove locks reliably when fcntl/close race is detected
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20240702024055.1411407-1-nichen@iscas.ac.cn/
Link: https://lore.kernel.org/r/20240702024055.1411407-1-nichen@iscas.ac.cn
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Jan reported that 'cd ..' may take a long time in deep directory
hierarchies under a bind-mount. If concurrent renames happen it is
possible to livelock in is_subdir() because it will keep retrying.
Change is_subdir() from simply retrying over and over to retry once and
then acquire the rename lock to handle deep ancestor chains better. The
list of alternatives to this approach were less then pleasant. Change
the scope of rcu lock to cover the whole walk while at it.
A big thanks to Jan and Linus. Both Jan and Linus had proposed
effectively the same thing just that one version ended up being slightly
more elegant.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"The most important one fixes possible infinite loops reported by a
smartphone vendor OPPO recently due to some unexpected zero-sized
compressed pcluster out of interrupted I/Os, storage failures, etc.
Another patch fixes global buffer memory leak on unloading, and the
remaining one switches to use super_set_uuid() to keep with the other
filesystems.
Summary:
- Fix possible global buffer memory leak when unloading EROFS module
- Fix FS_IOC_GETFSUUID ioctl by using super_set_uuid()
- Reset m_llen to 0 so then it can retry if metadata is invalid"
* tag 'erofs-for-6.10-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: ensure m_llen is reset to 0 if metadata is invalid
erofs: convert to use super_set_uuid to support for FS_IOC_GETFSUUID
erofs: fix possible memory leak in z_erofs_gbuf_exit()
|
|
When fcntl_setlk() races with close(), it removes the created lock with
do_lock_file_wait().
However, LSMs can allow the first do_lock_file_wait() that created the lock
while denying the second do_lock_file_wait() that tries to remove the lock.
In theory (but AFAIK not in practice), posix_lock_file() could also fail to
remove a lock due to GFP_KERNEL allocation failure (when splitting a range
in the middle).
After the bug has been triggered, use-after-free reads will occur in
lock_get_status() when userspace reads /proc/locks. This can likely be used
to read arbitrary kernel memory, but can't corrupt kernel memory.
This only affects systems with SELinux / Smack / AppArmor / BPF-LSM in
enforcing mode and only works from some security contexts.
Fix it by calling locks_remove_posix() instead, which is designed to
reliably get rid of POSIX locks associated with the given file and
files_struct and is also used by filp_flush().
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240702-fs-lock-recover-2-v1-1-edd456f63789@google.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For bundle receives to function properly, the previous iteration msg_inq
value is needed to make a judgement call on how much data there is to
receive. A previous fix ended up clearing it earlier as an error case
would potentially errantly set IORING_CQE_F_SOCK_NONEMPTY if the request
got failed.
Move the assignment to post assigning buffers for the receive, but
ensure that it's cleared for the buffer selection error case. With that,
buffer selection has the right msg_inq value and can correctly bundle
receives as designed.
Noticed while testing where it was apparent than more than 1 buffer was
never received. After fix was in place, multiple buffers are correctly
picked for receive. This provides a 10x speedup for the test case, as
the buffer size used was 64b.
Fixes: 18414a4a2eab ("io_uring/net: assign kmsg inq/flags before buffer selection")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Jiawen Wu says:
====================
net: txgbe: fix MSI and INTx interrupts
Fix MSI and INTx interrupts for txgbe driver.
changes in v3:
- Add flag wx->misc_irq_domain.
- Separate commits.
- Detail null-defer events.
changes in v2: https://lore.kernel.org/all/20240626060703.31652-1-jiawenwu@trustnetic.com
- Split into two commits.
- Detail commit description.
v1: https://lore.kernel.org/all/20240621080951.14368-1-jiawenwu@trustnetic.com
====================
Link: https://patch.msgid.link/20240701071416.8468-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When using MSI/INTx interrupt, the shared interrupts are still being
handled in the device remove routine, before free IRQs. So isb memory
is still read after it is freed. Thus move wx_free_isb_resources()
from txgbe_close() to txgbe_remove(). And fix the improper isb free
action in txgbe_open() error handling path.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rename original txgbe_misc_irq_handle() to txgbe_misc_irq_thread_fn()
since it is the handle thread to wake up. And add the primary handler
to deal the case of MSI/INTx, because there is a schedule NAPI poll.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When using MSI or INTx interrupts, request_irq() for pdev->irq will
conflict with request_threaded_irq() for txgbe->misc.irq, to cause
system crash. So remove txgbe_request_irq() for MSI/INTx case, and
rename txgbe_request_msix_irqs() since it only request for queue irqs.
Add wx->misc_irq_domain to determine whether the driver creates an IRQ
domain and threaded request the IRQs.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized.
Thus there will be kernel panic in wx_alloc_q_vectors() to allocate
queue vectors.
Fixes: 3f703186113f ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The global hci_hotkey_quickstart quirk flag is tested in
toshiba_acpi_enable_hotkeys() before the quirk flag is properly
initialized based on SMBIOS data. This causes the quirk to be
applied to all models, some of which behave erratically as a
result.
Fix this by initializing the global quirk flags during module
initialization before registering the ACPI driver. This also
allows us to mark toshiba_dmi_quirks[] as __initconst.
Fixes: 23f1d8b47d12 ("platform/x86: toshiba_acpi: Add quirk for buttons on Z830")
Reported-by: kemal <kmal@cock.li>
Closes: https://lore.kernel.org/platform-driver-x86/R4CYFS.TWB8QUU2SHWI1@cock.li/
Tested-by: kemal <kmal@cock.li>
Cc: stable@vger.kernel.org
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240701194539.348937-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Christophe Roullier says:
====================
Fixes for stm32-dwmac driver fails to probe
Mark Brown found issue during stm32-dwmac probe:
For the past few days networking has been broken on the Avenger 96, a
stm32mp157a based platform. The stm32-dwmac driver fails to probe:
<6>[ 1.894271] stm32-dwmac 5800a000.ethernet: IRQ eth_wake_irq not found
<6>[ 1.899694] stm32-dwmac 5800a000.ethernet: IRQ eth_lpi not found
<6>[ 1.905849] stm32-dwmac 5800a000.ethernet: IRQ sfty not found
<3>[ 1.912304] stm32-dwmac 5800a000.ethernet: Unable to parse OF data
<3>[ 1.918393] stm32-dwmac 5800a000.ethernet: probe with driver stm32-dwmac failed with error -75
which looks a bit odd given the commit contents but I didn't look at the
driver code at all.
Full boot log here:
https://lava.sirena.org.uk/scheduler/job/467150
A working equivalent is here:
https://lava.sirena.org.uk/scheduler/job/466518
I delivered 2 fixes to solve issue.
====================
Link: https://patch.msgid.link/20240701064838.425521-1-christophe.roullier@foss.st.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mask parameter of syscfg property is mandatory for MP13 but
optional for all other cases.
The function should not return error code because for non-MP13
the missing syscfg phandle in DT is not considered an error.
So reset err to 0 in that case to support existing DTs without
syscfg phandle.
Fixes: 50bbc0393114 ("net: stmmac: dwmac-stm32: add management of stm32mp13 for stm32")
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
checking clk rate
When we want to use clock from RCC to clock Ethernet PHY (with ETHCK)
we need to check if value of clock rate is authorized.
If ETHCK is unused, the ETHCK frequency is 0Hz and validation fails.
It makes no sense to validate unused ETHCK, so skip the validation.
Fixes: 582ac134963e ("net: stmmac: dwmac-stm32: Separate out external clock rate validation")
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Correct member @num_por with size of right array @emac_v4_0_0_por for
struct ethqos_emac_driver_data @emac_v4_0_0_data.
Cc: stable@vger.kernel.org
Fixes: 8c4d92e82d50 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms")
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20240701014720.2547856-1-quic_yijiyang@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Indeed the maximum DMA burst length can be programmed not only for DW
xGMACs, Allwinner EMACs and Spear SoC GMAC, but in accordance with
[1, 2, 3] for Generic DW *MAC IP-cores. Moreover the STMMAC driver parses
the property and then apply the configuration for all supported DW MAC
devices. All of that makes the property being available for all IP-cores
the bindings supports. Let's make sure the PBL-related properties are
validated for all of them by the common DW *MAC DT schema.
[1] DesignWare Cores Ethernet MAC Universal Databook, Revision 3.73a,
October 2013, p.378.
[2] DesignWare Cores Ethernet Quality-of-Service Databook, Revision 5.10a,
December 2017, p.1223.
[3] DesignWare Cores XGMAC - 10G Ethernet MAC Databook, Revision 2.11a,
September 2015, p.469-473.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240628154515.8783-1-fancer.lancer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Sebastian Andrzej Siewior says:
====================
net: bpf_net_context cleanups.
a small series with bpf_net_context cleanups/ improvements.
Jakub asked for #1 and #2 and while looking around I made #3.
====================
Link: https://patch.msgid.link/20240628103020.1766241-1-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The bpf_net_ctx_get_.*_flush_list() are used at the top of the function.
This means the variable is always assigned even if unused. By moving the
function to where it is used, it is possible to delay the initialisation
until it is unavoidable.
Not sure how much this gains in reality but by looking at bq_enqueue()
(in devmap.c) gcc pushes one register less to the stack. \o/.
Move flush list retrieval to where it is used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Every NIC driver utilizing XDP should invoke xdp_do_flush() after
processing all packages. With the introduction of the bpf_net_context
logic the flush lists (for dev, CPU-map and xsk) are lazy initialized
only if used. However xdp_do_flush() tries to flush all three of them so
all three lists are always initialized and the likely empty lists are
"iterated".
Without the usage of XDP but with CONFIG_DEBUG_NET the lists are also
initialized due to xdp_do_check_flushed().
Jakub suggest to utilize the hints in bpf_net_context and avoid invoking
the flush function. This will also avoiding initializing the lists which
are otherwise unused.
Introduce bpf_net_ctx_get_all_used_flush_lists() to return the
individual list if not-empty. Use the logic in xdp_do_flush() and
xdp_do_check_flushed(). Remove the not needed .*_check_flush().
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no clone() invocation within a bpf_net_ctx_…() block. Therefore
the task_struct::bpf_net_context has always to be NULL and an explicit
initialisation is not required.
Remove the NULL assignment in the clone() path.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
David Wei says:
====================
page_pool: bnxt_en: unlink old page pool in queue api using helper
56ef27e3 unexported page_pool_unlink_napi() and renamed it to
page_pool_disable_direct_recycling(). This is because there was no
in-tree user of page_pool_unlink_napi().
Since then Rx queue API and an implementation in bnxt got merged. In the
bnxt implementation, it broadly follows the following steps: allocate
new queue memory + page pool, stop old rx queue, swap, then destroy old
queue memory + page pool.
The existing NAPI instance is re-used so when the old page pool that is
no longer used but still linked to this shared NAPI instance is
destroyed, it will trigger warnings.
In my initial patches I unlinked a page pool from a NAPI instance
directly. Instead, export page_pool_disable_direct_recycling() and call
that instead to avoid having a driver touch a core struct.
====================
Link: https://patch.msgid.link/20240627030200.3647145-1-dw@davidwei.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Have bnxt call page_pool_disable_direct_recycling() to unlink the old
page pool when resetting a queue prior to destroying it, instead of
touching a netdev core struct directly.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
56ef27e3 unexported page_pool_unlink_napi() and renamed it to
page_pool_disable_direct_recycling(). This is because there was no
in-tree user of page_pool_unlink_napi().
Since then Rx queue API and an implementation in bnxt got merged. In the
bnxt implementation, it broadly follows the following steps: allocate
new queue memory + page pool, stop old rx queue, swap, then destroy old
queue memory + page pool.
The existing NAPI instance is re-used so when the old page pool that is
no longer used but still linked to this shared NAPI instance is
destroyed, it will trigger warnings.
In my initial patches I unlinked a page pool from a NAPI instance
directly. Instead, export page_pool_disable_direct_recycling() and call
that instead to avoid having a driver touch a core struct.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We only use the mapping in a single context, so kmap_local is sufficient
and cheaper. Make sure to use skb_frag_foreach_page as skb frags may
contain compound pages and we need to map page by page.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406161539.b5ff7b20-oliver.sang@intel.com
Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://patch.msgid.link/20240626100008.831849-1-sagi@grimberg.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pavel Begunkov says:
====================
zerocopy tx cleanups
Assorted zerocopy send path cleanups, the main part of which is
moving some net stack specific accounting out of io_uring back
to net/ in Patch 4.
====================
Link: https://patch.msgid.link/cover.1719190216.git.asml.silence@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
skb_zerocopy_iter_stream() only uses @orig_uarg in the !link_skb path,
and we can move the local variable in the appropriate block.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, io_uring's io_sg_from_iter() duplicates the part of
__zerocopy_sg_from_iter() charging pages to the socket. It'd be too easy
to miss while changing it in net/, the chunk is not the most
straightforward for outside users and full of internal implementation
details. io_uring is not a good place to keep it, deduplicate it by
moving out of the callback into __zerocopy_sg_from_iter().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of accounting every page range against the socket separately, do
it in batch based on the change in skb->truesize. It's also moved into
__zerocopy_sg_from_iter(), so that zerocopy_fill_skb_from_iter() is
simpler and responsible for setting frags but not the accounting.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Split a function out of __zerocopy_sg_from_iter() that only cares about
the traditional path with refcounted pages and doesn't need to know
about ->sg_from_iter. A preparation patch, we'll improve on the function
later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
skb_zcopy_set() does nothing if there is already a ubuf_info associated
with an skb, and since ->link_skb should have set it several lines above
the check here essentially does nothing and can be removed. It's also
safer this way, because even if the callback is faulty we'll
have it set.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A couple of error leg problems, one affecting scsi_debug and the other
affecting pure SAS (i.e. not SATA) SCSI expanders"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed
scsi: scsi_debug: Fix create target debugfs failure
|
|
phy_suspend() checks the WoL status, and then dereferences
phydrv->flags if (and only if) we decided that WoL has been enabled
on either the PHY or the netdev.
We then check whether phydrv was NULL, but we've potentially already
dereferenced the pointer.
If phydrv is NULL, then phy_ethtool_get_wol() will return an error
and leave wol.wolopts set to zero. However, if netdev->wol_enabled
is true, then we would dereference a NULL pointer.
Checking the PHY drivers, the only place that phydev->wol_enabled is
checked by them is in their suspend/resume callbacks and nowhere else
(which is correct, because phylib only updates this in phy_suspend()).
So, move the NULL pointer check earlier to avoid a NULL pointer
dereference. Leave the check for phydrv->suspend in place as a driver
may populate the .resume method but not the .suspend method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1sN8tn-00GDCZ-Jj@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
