summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-21drm/amd/display: Update dram_clock_change_latency for DCN2.1Jake Wang
[WHY] dram clock change latencies get updated using ddr4 latency table, but that update does not happen before validation. This value should not be the default and should be number received from df for better mode support. This may cause a PState hang on high refresh panels with short vblanks such as on 1080p 360hz or 300hz panels. [HOW] Update latency from 23.84 to 11.72. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-21drm/amdgpu: remove gpu info firmware of green sardineHuang Rui
The ip discovery is supported on green sardine, it doesn't need gpu info firmware anymore. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2021-01-21drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM CaseSung Lee
[WHY] Previously as MPO + ODM Combine was not supported, finding secondary pipes for each case was mutually exclusive. Now that both are supported at the same time, both cases should be taken into account when finding a secondary pipe. [HOW] If a secondary pipe cannot be found based on previous bottom pipe, search for a second pipe using next_odm_pipe instead. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2021-01-21Merge branch 'printk-rework' into for-linusPetr Mladek
2021-01-21KVM: Forbid the use of tagged userspace addresses for memslotsMarc Zyngier
The use of a tagged address could be pretty confusing for the whole memslot infrastructure as well as the MMU notifiers. Forbid it altogether, as it never quite worked the first place. Cc: stable@vger.kernel.org Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-01-21lightnvm: fix memory leak when submit failsPan Bian
The allocated page is not released if error occurs in nvm_submit_io_sync_raw(). __free_page() is moved ealier to avoid possible memory leak issue. Fixes: aff3fb18f957 ("lightnvm: move bad block and chunk state logic to core") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-21mac80211: remove NSS number of 160MHz if not support 160MHz for HEWen Gong
When it does not support 160MHz in HE phy capabilities information, it should not treat the NSS number of 160MHz as a valid number, otherwise the final NSS will be set to 0. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1609816120-9411-2-git-send-email-wgong@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21mac80211_hwsim: add 6GHz channelsRamon Fontes
Advertise 6GHz channels to mac80211. Signed-off-by: Ramon Fontes <ramonreisfontes@gmail.com> Link: https://lore.kernel.org/r/20201227031155.81161-1-ramonreisfontes@gmail.com [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21Merge tag 'nvme-5.11-2020-01-21' of git://git.infradead.org/nvme into block-5.11Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for 5.11: - fix a status code in nvmet (Chaitanya Kulkarni) - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng) - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen) - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar) - fix a double DMA unmap in nvme-pci" * tag 'nvme-5.11-2020-01-21' of git://git.infradead.org/nvme: nvme-pci: fix error unwind in nvme_map_data nvme-pci: refactor nvme_unmap_data nvmet: set right status on error in id-ns handler nvme-pci: allow use of cmb on v1.4 controllers nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout nvme: check the PRINFO bit before deciding the host buffer length
2021-01-21x86/mmx: Use KFPU_387 for MMX string operationsAndy Lutomirski
The default kernel_fpu_begin() doesn't work on systems that support XMM but haven't yet enabled CR4.OSFXSR. This causes crashes when _mmx_memcpy() is called too early because LDMXCSR generates #UD when the aforementioned bit is clear. Fix it by using kernel_fpu_begin_mask(KFPU_387) explicitly. Fixes: 7ad816762f9b ("x86/fpu: Reset MXCSR to default in kernel_fpu_begin()") Reported-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl> Tested-by: Krzysztof Mazur <krzysiek@podlesie.net> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/e7bf21855fe99e5f3baa27446e32623358f69e8d.1611205691.git.luto@kernel.org
2021-01-21mac80211: 160MHz with extended NSS BW in CSAShay Bar
Upon receiving CSA with 160MHz extended NSS BW from associated AP, STA should set the HT operation_mode based on new_center_freq_seg1 because it is later used as ccfs2 in ieee80211_chandef_vht_oper(). Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20201222064714.24888-1-shay.bar@celeno.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21mac80211: add LDPC encoding to ieee80211_parse_tx_radiotapPhilipp Borgers
This patch adds support for LDPC encoding to the radiotap tx parse function. Piror to this change adding the LDPC flag to the radiotap header did not encode frames with LDPC. Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> Link: https://lore.kernel.org/r/20201219170710.11706-1-borgers@mi.fu-berlin.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21regulator: consumer: Add missing stubs to regulator/consumer.hDmitry Osipenko
Add missing stubs to regulator/consumer.h in order to fix COMPILE_TEST of the kernel. In particular this should fix compile-testing of OPP core because of a missing stub for regulator_sync_voltage(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210120205844.12658-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21ASoC: qcom: Fix number of HDMI RDMA channels on sc7180Stephen Boyd
Suspending/resuming with an HDMI dongle attached leads to crashes from an audio regmap. Unable to handle kernel paging request at virtual address ffffffc018068000 Mem abort info: ESR = 0x96000047 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081b12000 [ffffffc018068000] pgd=0000000275d14003, pud=0000000275d14003, pmd=000000026365d003, pte=0000000000000000 Internal error: Oops: 96000047 [#1] PREEMPT SMP Call trace: regmap_mmio_write32le+0x2c/0x40 regmap_mmio_write+0x48/0x6c _regmap_bus_reg_write+0x34/0x44 _regmap_write+0x100/0x150 regcache_default_sync+0xc0/0x138 regcache_sync+0x188/0x26c lpass_platform_pcmops_resume+0x48/0x54 [snd_soc_lpass_platform] snd_soc_component_resume+0x28/0x40 soc_resume_deferred+0x6c/0x178 process_one_work+0x208/0x3c8 worker_thread+0x23c/0x3e8 kthread+0x144/0x178 ret_from_fork+0x10/0x18 Code: d503201f d50332bf f94002a8 8b344108 (b9000113) I can reliably reproduce this problem by running 'tail' on the registers file in debugfs for the hdmi regmap. # tail /sys/kernel/debug/regmap/62d87000.lpass-lpass_hdmi/registers [ 84.658733] Unable to handle kernel paging request at virtual address ffffffd0128e800c This crash happens because we're trying to read registers from the regmap beyond the length of the mapping created by ioremap(). The number of hdmi_rdma_channels determines the size of the regmap via this code in sound/soc/qcom/lpass-cpu.c: lpass_hdmi_regmap_config.max_register = LPAIF_HDMI_RDMAPER_REG(variant, variant->hdmi_rdma_channels); According to debugfs the size of the regmap is 0x68010 but according to the DTS file posted in [1] the size is only 0x68000 (see the first reg property of the lpass_cpu node). Let's change the number of channels to be 3 instead of 4 so the math works out to have a max register of 0x67010, nicely fitting inside of the region size of 0x68000. Note: I tried to bump up the size of the register region to the next page to include the 0x68010 register but then the tail command caused SErrors with an async abort, implying that the register region doesn't exist or it isn't clocked because the bus is telling us that the register read failed. I reduce the number of channels and played audio through the HDMI channel and it kept working so I think this is correct. Fixes: 2ad63dc8df6b ("ASoC: qcom: sc7180: Add support for audio over DP") Link: https://lore.kernel.org/r/1601448168-18396-2-git-send-email-srivasam@codeaurora.org [1] Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Cc: Srinivasa Rao <srivasam@codeaurora.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210115203329.846824-1-swboyd@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21mac80211: add rx decapsulation offload supportFelix Fietkau
This allows drivers to pass 802.3 frames to mac80211, with some restrictions: - the skb must be passed with a valid sta - fast-rx needs to be active for the sta - monitor mode needs to be disabled mac80211 will tell the driver when it is safe to enable rx decap offload for a particular station. In order to implement support, a driver must: - call ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD) - implement ops->sta_set_decap_offload - mark 802.3 frames with RX_FLAG_8023 If it doesn't want to enable offload for some vif types, it can mask out IEEE80211_OFFLOAD_DECAP_ENABLED in vif->offload_flags from within the .add_interface or .update_vif_offload driver ops Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201218184718.93650-6-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21net/fq_impl: do not maintain a backlog-sorted list of flowsFelix Fietkau
A sorted flow list is only needed to drop packets in the biggest flow when hitting the overmemory condition. By scanning flows only when needed, we can avoid paying the cost of maintaining the list under normal conditions In order to avoid scanning lots of empty flows and touching too many cold cache lines, a bitmap of flows with backlog is maintained Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201218184718.93650-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21net/fq_impl: drop get_default_func, move default flow to fq_tinFelix Fietkau
Simplifies the code and prepares for a rework of scanning for flows on overmemory drop. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201218184718.93650-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21net/fq_impl: bulk-free packets from a flow on overmemoryFelix Fietkau
This is similar to what sch_fq_codel does. It also amortizes the worst case cost of a follow-up patch that changes the selection of the biggest flow for dropping packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201218184718.93650-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize stateAndy Lutomirski
Currently, requesting kernel FPU access doesn't distinguish which parts of the extended ("FPU") state are needed. This is nice for simplicity, but there are a few cases in which it's suboptimal: - The vast majority of in-kernel FPU users want XMM/YMM/ZMM state but do not use legacy 387 state. These users want MXCSR initialized but don't care about the FPU control word. Skipping FNINIT would save time. (Empirically, FNINIT is several times slower than LDMXCSR.) - Code that wants MMX doesn't want or need MXCSR initialized. _mmx_memcpy(), for example, can run before CR4.OSFXSR gets set, and initializing MXCSR will fail because LDMXCSR generates an #UD when the aforementioned CR4 bit is not set. - Any future in-kernel users of XFD (eXtended Feature Disable)-capable dynamic states will need special handling. Add a more specific API that allows callers to specify exactly what they want. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Krzysztof Piotr Olędzki <ole@ans.pl> Link: https://lkml.kernel.org/r/aff1cac8b8fc7ee900cf73e8f2369966621b053f.1611205691.git.luto@kernel.org
2021-01-21KVM: arm64: Filter out v8.1+ events on v8.0 HWMarc Zyngier
When running on v8.0 HW, make sure we don't try to advertise events in the 0x4000-0x403f range. Cc: stable@vger.kernel.org Fixes: 88865beca9062 ("KVM: arm64: Mask out filtered events in PCMEID{0,1}_EL1") Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210121105636.1478491-1-maz@kernel.org
2021-01-21tee: optee: replace might_sleep with cond_reschedRouven Czerwinski
might_sleep() is a debugging aid and triggers rescheduling only for certain kernel configurations. Replace with an explicit check and reschedule to work for all kernel configurations. Fixes the following trace: [ 572.945146] rcu: INFO: rcu_sched self-detected stall on CPU [ 572.949275] rcu: 0-....: (2099 ticks this GP) idle=572/1/0x40000002 softirq=7412/7412 fqs=974 [ 572.957964] (t=2100 jiffies g=10393 q=21) [ 572.962054] NMI backtrace for cpu 0 [ 572.965540] CPU: 0 PID: 165 Comm: xtest Not tainted 5.8.7 #1 [ 572.971188] Hardware name: STM32 (Device Tree Support) [ 572.976354] [<c011163c>] (unwind_backtrace) from [<c010b7f8>] (show_stack+0x10/0x14) [ 572.984080] [<c010b7f8>] (show_stack) from [<c0511e4c>] (dump_stack+0xc4/0xd8) [ 572.991300] [<c0511e4c>] (dump_stack) from [<c0519abc>] (nmi_cpu_backtrace+0x90/0xc4) [ 572.999130] [<c0519abc>] (nmi_cpu_backtrace) from [<c0519bdc>] (nmi_trigger_cpumask_backtrace+0xec/0x130) [ 573.008706] [<c0519bdc>] (nmi_trigger_cpumask_backtrace) from [<c01a5184>] (rcu_dump_cpu_stacks+0xe8/0x110) [ 573.018453] [<c01a5184>] (rcu_dump_cpu_stacks) from [<c01a4234>] (rcu_sched_clock_irq+0x7fc/0xa88) [ 573.027416] [<c01a4234>] (rcu_sched_clock_irq) from [<c01acdd0>] (update_process_times+0x30/0x8c) [ 573.036291] [<c01acdd0>] (update_process_times) from [<c01bfb90>] (tick_sched_timer+0x4c/0xa8) [ 573.044905] [<c01bfb90>] (tick_sched_timer) from [<c01adcc8>] (__hrtimer_run_queues+0x174/0x358) [ 573.053696] [<c01adcc8>] (__hrtimer_run_queues) from [<c01aea2c>] (hrtimer_interrupt+0x118/0x2bc) [ 573.062573] [<c01aea2c>] (hrtimer_interrupt) from [<c09ad664>] (arch_timer_handler_virt+0x28/0x30) [ 573.071536] [<c09ad664>] (arch_timer_handler_virt) from [<c0190f50>] (handle_percpu_devid_irq+0x8c/0x240) [ 573.081109] [<c0190f50>] (handle_percpu_devid_irq) from [<c018ab8c>] (generic_handle_irq+0x34/0x44) [ 573.090156] [<c018ab8c>] (generic_handle_irq) from [<c018b194>] (__handle_domain_irq+0x5c/0xb0) [ 573.098857] [<c018b194>] (__handle_domain_irq) from [<c052ac50>] (gic_handle_irq+0x4c/0x90) [ 573.107209] [<c052ac50>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90) [ 573.114682] Exception stack(0xd90dfcf8 to 0xd90dfd40) [ 573.119732] fce0: ffff0004 00000000 [ 573.127917] fd00: 00000000 00000000 00000000 00000000 00000000 00000000 d93493cc ffff0000 [ 573.136098] fd20: d2bc39c0 be926998 d90dfd58 d90dfd48 c09f3384 c01151f0 400d0013 ffffffff [ 573.144281] [<c0100b0c>] (__irq_svc) from [<c01151f0>] (__arm_smccc_smc+0x10/0x20) [ 573.151854] [<c01151f0>] (__arm_smccc_smc) from [<c09f3384>] (optee_smccc_smc+0x3c/0x44) [ 573.159948] [<c09f3384>] (optee_smccc_smc) from [<c09f4170>] (optee_do_call_with_arg+0xb8/0x154) [ 573.168735] [<c09f4170>] (optee_do_call_with_arg) from [<c09f4638>] (optee_invoke_func+0x110/0x190) [ 573.177786] [<c09f4638>] (optee_invoke_func) from [<c09f1ebc>] (tee_ioctl+0x10b8/0x11c0) [ 573.185879] [<c09f1ebc>] (tee_ioctl) from [<c029f62c>] (ksys_ioctl+0xe0/0xa4c) [ 573.193101] [<c029f62c>] (ksys_ioctl) from [<c0100060>] (ret_fast_syscall+0x0/0x54) [ 573.200750] Exception stack(0xd90dffa8 to 0xd90dfff0) [ 573.205803] ffa0: be926bf4 be926a78 00000003 8010a403 be926908 004e3cf8 [ 573.213987] ffc0: be926bf4 be926a78 00000000 00000036 be926908 be926918 be9269b0 bffdf0f8 [ 573.222162] ffe0: b6d76fb0 be9268fc b6d66621 b6c7e0d8 seen on STM32 DK2 with CONFIG_PREEMPT_NONE. Fixes: 9f02b8f61f29 ("tee: optee: add might_sleep for RPC requests") Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Tested-by: Sumit Garg <sumit.garg@linaro.org> [jw: added fixes tag + small adjustments in the code] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-21KVM: arm64: Compute TPIDR_EL2 ignoring MTE tagSteven Price
KASAN in HW_TAGS mode will store MTE tags in the top byte of the pointer. When computing the offset for TPIDR_EL2 we don't want anything in the top byte, so remove the tag to ensure the computation is correct no matter what the tag. Fixes: 94ab5b61ee16 ("kasan, arm64: enable CONFIG_KASAN_HW_TAGS") Signed-off-by: Steven Price <steven.price@arm.com> [maz: added comment] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210108161254.53674-1-steven.price@arm.com
2021-01-21Merge 9bb48c82aced ("tty: implement write_iter") into tty-linusGreg Kroah-Hartman
We want the single "splice/sendfile to a tty" regression fix into tty-linus so it can get into 5.11-final, while the larger patch series fixing "splice/sendfile from a tty" should wait for 5.12-rc1 so that we get more testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21mm/memblock: Fix typo in comment of memblock_phys_alloc_try_nid()Levi Yun
memblock_phys_alloc_try_nid function's comments has typo NUMA as MUMA. Correct this typo. Signed-off-by: Levi Yun <ppbuk5246@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
2021-01-20net: stmmac: dwmac-meson8b: fix the RX delay validationMartin Blumenstingl
When has_prg_eth1_rgmii_rx_delay is true then we support RX delays between 0ps and 3000ps in 200ps steps. Swap the validation of the RX delay based on the has_prg_eth1_rgmii_rx_delay flag so the 200ps check is now applied correctly on G12A SoCs (instead of only allow 0ps or 2000ps on G12A, but 0..3000ps in 200ps steps on older SoCs which don't support that). Fixes: de94fc104d58ea ("net: stmmac: dwmac-meson8b: add support for the RGMII RX delay on G12A") Reported-by: Martijn van Deventer <martijn@martijnvandeventer.nl> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210119202424.591349-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20ip_gre: remove CRC flag from dev features in gre_gso_segmentXin Long
This patch is to let it always do CRC checksum in sctp_gso_segment() by removing CRC flag from the dev features in gre_gso_segment() for SCTP over GRE, just as it does in Commit 527beb8ef9c0 ("udp: support sctp over udp in skb_udp_tunnel_segment") for SCTP over UDP. It could set csum/csum_start in GSO CB properly in sctp_gso_segment() after that commit, so it would do checksum with gso_make_checksum() in gre_gso_segment(), and Commit 622e32b7d4a6 ("net: gre: recompute gre csum for sctp over gre tunnels") can be reverted now. Note that when need_csum is false, we can still leave CRC checksum of SCTP to HW by not clearing this CRC flag if it's supported, as Jakub and Alex noticed. v1->v2: - improve the changelog. - fix "rev xmas tree" in varibles declaration. v2->v3: - remove CRC flag from dev features only when need_csum is true. Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/00439f24d5f69e2c6fa2beadc681d056c15c258f.1610772251.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20udp: not remove the CRC flag from dev features when need_csum is falseXin Long
In __skb_udp_tunnel_segment(), when it's a SCTP over VxLAN/GENEVE packet and need_csum is false, which means the outer udp checksum doesn't need to be computed, csum_start and csum_offset could be used by the inner SCTP CRC CSUM for SCTP HW CRC offload. So this patch is to not remove the CRC flag from dev features when need_csum is false. Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/1e81b700642498546eaa3f298e023fd7ad394f85.1610776757.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net/sched: cls_flower add CT_FLAGS_INVALID flag supportwenxu
This patch add the TCA_FLOWER_KEY_CT_FLAGS_INVALID flag to match the ct_state with invalid for conntrack. Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/1611045110-682-1-git-send-email-wenxu@ucloud.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20Merge branch 'net-inline-rollback_registered-functions'Jakub Kicinski
After recent changes to the error path of register_netdevice() we no longer need a version of unregister_netdevice_many() which does not set net_todo. We can inline the rollback_registered() functions into respective unregister_netdevice() calls. Link: https://lore.kernel.org/r/20210119202521.3108236-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: inline rollback_registered_many()Jakub Kicinski
Similar to the change for rollback_registered() - rollback_registered_many() was a part of unregister_netdevice_many() minus the net_set_todo(), which is no longer needed. Functionally this patch moves the list_empty() check back after: BUG_ON(dev_boot_phase); ASSERT_RTNL(); but I can't find any reason why that would be an issue. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: move rollback_registered_many()Jakub Kicinski
Move rollback_registered_many() and add a temporary forward declaration to make merging the code into unregister_netdevice_many() easier to review. No functional changes. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: inline rollback_registered()Jakub Kicinski
rollback_registered() is a local helper, it's common for driver code to call unregister_netdevice_queue(dev, NULL) when they want to unregister netdevices under rtnl_lock. Inline rollback_registered() and adjust the only remaining caller. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: move net_set_todo inside rollback_registered()Jakub Kicinski
Commit 93ee31f14f6f ("[NET]: Fix free_netdev on register_netdev failure.") moved net_set_todo() outside of rollback_registered() so that rollback_registered() can be used in the failure path of register_netdevice() but without risking a double free. Since commit cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state."), however, we have a better way of handling that condition, since destructors don't call free_netdev() directly. After the change in commit c269a24ce057 ("net: make free_netdev() more lenient with unregistering devices") we can now move net_set_todo() back. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20Merge branch 'nexthop-more-fine-grained-policies-for-netlink-message-validation'Jakub Kicinski
Petr Machata says: ==================== nexthop: More fine-grained policies for netlink message validation There is currently one policy that covers all attributes for next hop object management. Actual validation is then done in code, which makes it unobvious which attributes are acceptable when, and indeed that everything is rejected as necessary. In this series, split rtm_nh_policy to several policies that cover various aspects of the next hop object configuration, and instead of open-coding the validation, defer to nlmsg_parse(). This should make extending the next hop code simpler as well, which will be relevant in near future for resilient hashing implementation. This was tested by running tools/testing/selftests/net/fib_nexthops.sh. Additionally iproute2 was tweaked to issue "nexthop list id" as an RTM_GETNEXTHOP dump request, instead of a straight get to test that unexpected attributes are indeed rejected. ==================== Link: https://lore.kernel.org/r/cover.1611156111.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20nexthop: Specialize rtm_nh_policyPetr Machata
This policy is currently only used for creation of new next hops and new next hop groups. Rename it accordingly and remove the two attributes that are not valid in that context: NHA_GROUPS and NHA_MASTER. For consistency with other policies, do not mention policy array size in the declarator, and replace NHA_MAX for ARRAY_SIZE as appropriate. Note that with this commit, NHA_MAX and __NHA_MAX are not used anymore. Leave them in purely as a user API. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20nexthop: Use a dedicated policy for nh_valid_dump_req()Petr Machata
This function uses the global nexthop policy, but only accepts four particular attributes. Create a new policy that only includes the four supported attributes, and use it. Convert the loop to a series of ifs. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20nexthop: Use a dedicated policy for nh_valid_get_del_req()Petr Machata
This function uses the global nexthop policy only to then bounce all arguments except for NHA_ID. Instead, just create a new policy that only includes the one allowed attribute. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: dsa: microchip: Adjust reset release timing to match reference reset ↵Marek Vasut
circuit KSZ8794CNX datasheet section 8.0 RESET CIRCUIT describes recommended circuit for interfacing with CPU/FPGA reset consisting of 10k pullup resistor and 10uF capacitor to ground. This circuit takes ~100 ms to rise enough to release the reset. For maximum supply voltage VDDIO=3.3V VIH=2.0V R=10kR C=10uF that is VDDIO - VIH t = R * C * -ln( ------------- ) = 10000*0.00001*-(-0.93)=0.093 s VDDIO so we need ~95 ms for the reset to really de-assert, and then the original 100us for the switch itself to come out of reset. Simply msleep() for 100 ms which fits the constraint with a bit of extra space. Fixes: 5b797980908a ("net: dsa: microchip: Implement recommended reset timing") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210120030502.617185-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: dsa: microchip: ksz8795: Fix KSZ8794 port map againMarek Vasut
The KSZ8795 switch has 4 external ports {0,1,2,3} and 1 CPU port {4}, so does the KSZ8765. The KSZ8794 seems to be repackaged KSZ8795 with different ID and port 3 not routed out, however the port 3 registers are present in the silicon, so the KSZ8794 switch has 3 external ports {0,1,2} and 1 CPU port {4}. Currently the driver always uses the last port as CPU port, on KSZ8795/KSZ8765 that is port 4 and that is OK, but on KSZ8794 that is port 3 and that is not OK, as it must also be port 4. This patch adjusts the driver such that it always registers a switch with 5 ports total (4 external ports, 1 CPU port), always sets the CPU port to switch port 4, and then configures the external port mask according to the switch model -- 3 ports for KSZ8794 and 4 for KSZ8795/KSZ8765. Fixes: 68a1b676db52 ("net: dsa: microchip: ksz8795: remove superfluous port_cnt assignment") Fixes: 4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt where possible") Fixes: 241ed719bc98 ("net: dsa: microchip: ksz8795: use port_cnt instead of TOTOAL_PORT_NUM") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210120001045.488506-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limitEnzo Matsumiya
Parameter ql2xenforce_iocb_limit is enabled by default. Link: https://lore.kernel.org/r/20210118184922.23793-1-ematsumiya@suse.de Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking") Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-20scsi: target: iscsi: Fix typo in commentValdis Klētnieks
Correct the spelling of Nagle's name in a comment. Link: https://lore.kernel.org/r/2921.1610694423@turing-police Reviewed-by: Chaitanya Kulkarni <chiatanya.kulkarni@wdc.com> Signed-off-by: Valdis Klētnieks <valdis.kletnieks@vt.edu> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-20net: dsa: Fix off by one in dsa_loop_port_vlan_add()Dan Carpenter
The > comparison is intended to be >= to prevent reading beyond the end of the ps->vlans[] array. It doesn't affect run time though because the ps->vlans[] array has VLAN_N_VID (4096) elements and the vlan->vid cannot be > 4094 because it is checked earlier. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/YAbyb5kBJQlpYCs2@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20tty: implement write_iterLinus Torvalds
This makes the tty layer use the .write_iter() function instead of the traditional .write() functionality. That allows writev(), but more importantly also makes it possible to enable .splice_write() for ttys, reinstating the "splice to tty" functionality that was lost in commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops"). Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Reported-by: Oliver Giles <ohw.giles@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-21Merge series "ASoC: qcom: Fix broken lpass driver" from Srinivas Kandagatla ↵Mark Brown
<srinivas.kandagatla@linaro.org>: LPASS driver is partially broken on DragonBoard DB410c on 5.10 and its totally broken on other Supported Qualcomm SoCs. This was due to DAI ids being over written by the SoC specific header files in the dt-bindings. Idea of having SoC specific headers is not doable when we are dealing with a common driver. So this patchset attempts to fix this properly by creating a common dt-bindings header for lpass which can be updated with new entries if required. This patchset also add an simple of_xlate function to resolve the dai names and different SoCs might not have 1:1 mapping for the dai_driver array with dai ids. Changes since v1: - removed array indexes as suggested by Stephan G. - rebased to sound/for-next branch - collected Srinivasa tested-by tag for sc7180 platform. Thanks, srini Srinivas Kandagatla (2): ASoC: dt-bindings: lpass: Fix and common up lpass dai ids ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY include/dt-bindings/sound/apq8016-lpass.h | 7 +++---- include/dt-bindings/sound/qcom,lpass.h | 15 +++++++++++++++ include/dt-bindings/sound/sc7180-lpass.h | 6 ++---- sound/soc/qcom/lpass-cpu.c | 22 ++++++++++++++++++++++ sound/soc/qcom/lpass-platform.c | 12 ++++++++++++ sound/soc/qcom/lpass-sc7180.c | 9 +++------ sound/soc/qcom/lpass.h | 2 +- 7 files changed, 58 insertions(+), 15 deletions(-) create mode 100644 include/dt-bindings/sound/qcom,lpass.h -- 2.21.0
2021-01-21Merge series "ASoC: mediatek: mt8183: ignore TDM DAI link by by default" ↵Mark Brown
from Tzung-Bi Shih <tzungbi@google.com>: hdmi-codec is an optional property. The 2 patches fix DAI link binding error when the property doesn't exist in DTS. Tzung-Bi Shih (2): ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 5 ++++- sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) -- 2.30.0.284.gd98b1dd5eaa7-goog
2021-01-21Merge series "Add KUNIT tests for ASoC topology" from Amadeusz ↵Mark Brown
Sławiński<amadeuszx.slawinski@linux.intel.com>: This series adds unit tests for ASoC topology. First fix problems found when developing and running test cases and then add tests implementation. Tests themselves are quite simple and just call snd_soc_tplg_component_load() with various parameters and check the result. Tests themselves are described in more detail in commits adding them. Goal is to expand the amount of test cases in following patches. Prerequisity for this patchset are 2 patches which have already been sent: https://lore.kernel.org/alsa-devel/20210114163602.911205-1-amadeuszx.slawinski@linux.intel.com/T/#t Description on how typical test case itself works: In order to load topology we need to have 3 things: card, codec component & platform component. In typical test case we register card and platform component and bind to dummy codec. There are of course execeptions, when we want to test behaviour of topology API when component or card is missing. Note that this is bit different from typical scenario (in SOF and skylake drivers) where card is registered by machine driver and component by platform driver, as we register both when setting up test. If you check the test case most of them have similar architecture of: 1. /* run test */ ret = snd_soc_register_card(&kunit_comp->card); if (ret != 0 && ret != -EPROBE_DEFER) KUNIT_FAIL(test, "Failed to register card"); 2. ret = snd_soc_component_initialize(&kunit_comp->comp, &test_component, test_dev); KUNIT_EXPECT_EQ(test, 0, ret); 3. ret = snd_soc_add_component(&kunit_comp->comp, NULL, 0); KUNIT_EXPECT_EQ(test, 0, ret); Ad. 1. First we register card, which in most tests returns -EPROBE_DEFER (from snd_soc_bind_card()), as platform component is not yet created. I test for both 0 and -EPROBE_DEFER, as it makes it easier to reshuffle this code around if needed and there is one test case which does it in different order. Ad. 2. Then we initialize platform component with structure pointing at proper probe function, which calls snd_soc_tplg_component_load() with test parameters and checks expected result. Ad. 3. And then in follow up we call snd_soc_add_component() which creates platform component for us and calls snd_soc_try_rebind_card() which if everything is bound properly calls previously set probe function. Amadeusz Sławiński (5): ASoC: topology: Properly unregister DAI on removal Revert "ASoC: soc-devres: add devm_snd_soc_register_dai()" ASoC: topology: KUnit: Add KUnit tests passing various arguments to snd_soc_tplg_component_load ASoC: topology: KUnit: Add KUnit tests passing empty topology with variants to snd_soc_tplg_component_load ASoC: topology: KUnit: Add KUnit tests passing topology with PCM to snd_soc_tplg_component_load include/sound/soc.h | 4 - sound/soc/Kconfig | 17 + sound/soc/Makefile | 5 + sound/soc/soc-devres.c | 37 -- sound/soc/soc-topology-test.c | 843 ++++++++++++++++++++++++++++++++++ sound/soc/soc-topology.c | 9 +- 6 files changed, 870 insertions(+), 45 deletions(-) create mode 100644 sound/soc/soc-topology-test.c -- 2.25.1
2021-01-20mtd: rawnand: omap: Use BCH private fields in the specific OOB layoutMiquel Raynal
The OMAP driver may leverage software BCH logic to locate errors while using its own hardware to detect the presence of errors. This is achieved with a "mixed" mode which initializes manually the software BCH internal logic while providing its own OOB layout. The issue here comes from the fact that the BCH driver has been updated to only use generic NAND objects, and no longer depend on raw NAND structures as it is usable from SPI-NAND as well. However, at the end of the BCH context initialization, the driver checks the validity of the OOB layout. At this stage, the raw NAND fields have not been populated yet while being used by the layout helpers, leading to an invalid layout. The chosen solution here is to include the BCH structure definition and to refer to the BCH fields directly (de-referenced as a const pointer here) to know as early as possible the number of steps and ECC bytes which have been chosen. Note: I don't know which commit exactly triggered the error, but the entire migration to a generic BCH driver got merged in one go, so this should not be a problem for stable backports. Reported-by: Adam Ford <aford173@gmail.com> Fixes: 80fe603160a4 ("mtd: nand: ecc-bch: Stop using raw NAND structures") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit-28.dts Link: https://lore.kernel.org/linux-mtd/20210119155510.5655-1-miquel.raynal@bootlin.com
2021-01-20Merge tag 'for-5.11-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more one line fixes for various bugs, stable material. - fix send when emitting clone operation from the same file and root - fix double free on error when cleaning backrefs - lockdep fix during relocation - handle potential error during reloc when starting transaction - skip running delayed refs during commit (leftover from code removal in this dev cycle)" * tag 'for-5.11-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't clear ret in btrfs_start_dirty_block_groups btrfs: fix lockdep splat in btrfs_recover_relocation btrfs: do not double free backref nodes on error btrfs: don't get an EINTR during drop_snapshot for reloc btrfs: send: fix invalid clone operations when cloning from the same file and root btrfs: no need to run delayed refs after commit_fs_roots during commit
2021-01-20ALSA: usb-audio: Fix hw constraints dependenciesTakashi Iwai
Since the recent refactoring, it's been reported that some USB-audio devices (typically webcams) are no longer detected properly by PulseAudio. The debug session revealed that it's failing at probing by PA to try the sample rate 44.1kHz while the device has discrete sample rates other than 44.1kHz. But the puzzle was that arecord works as is, and some other devices with the discrete rates work, either. After all, this turned out to be the lack of the dependencies in a few hw constraint rules: snd_pcm_hw_rule_add() has the (variable) arguments specifying the dependent parameters, and some functions didn't set the target parameter itself as the dependencies. This resulted in an invalid parameter that could be generated only in a certain call pattern. This bug itself has been present in the code, but it didn't trigger errors just because the rules were casually avoiding such a corner case. After the recent refactoring and cleanup, however, the hw constraints work "as expected", and the problem surfaced now. For fixing the problem above, this patch adds the missing dependent parameters to each snd_pcm_hw_rule() call. Fixes: bc4e94aa8e72 ("ALSA: usb-audio: Handle discrete rates properly in hw constraints") BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1181014 Link: https://lore.kernel.org/r/20210120204554.30177-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/can/dev.c commit 03f16c5075b2 ("can: dev: can_restart: fix use after free bug") commit 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") Code move. drivers/net/dsa/b53/b53_common.c commit 8e4052c32d6b ("net: dsa: b53: fix an off by one in checking "vlan->vid"") commit b7a9e0da2d1c ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects") Field rename. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-24 06:29:30 +0000