summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-02net: ipa: fix two format specifier errorsAlex Elder
Fix two format specifiers that used %lu for a size_t in "ipa_mem.c". Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: ipa: use the right accessor in ipa_endpoint_status_skip()Alex Elder
When extracting the destination endpoint ID from the status in ipa_endpoint_status_skip(), u32_get_bits() is used. This happens to work, but it's wrong: the structure field is only 8 bits wide instead of 32. Fix this by using u8_get_bits() to get the destination endpoint ID. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: ipa: be explicit about endiannessAlex Elder
Sparse warns that the assignment of the metadata mask for a QMAP endpoint in ipa_endpoint_init_hdr_metadata_mask() is a bad assignment. We know we want the mask value to be big endian, even though the value we write is in host byte order. Use a __force tag to indicate we really mean it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: ipa: add a missing __iomem attributeAlex Elder
The virt local variable in gsi_channel_state() does not have an __iomem attribute but should. Fix this. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Amy Parker <enbyamy@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: ipa: pass correct dma_handle to dma_free_coherent()Dan Carpenter
The "ring->addr = addr;" assignment is done a few lines later so we can't use "ring->addr" yet. The correct dma_handle is "addr". Fixes: 650d1603825d ("soc: qcom: ipa: the generic software interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/YBjpTU2oejkNIULT@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is setHeiner Kallweit
So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ is set and interrupt is shared, then free_irq() creates an "artificial" interrupt by calling the interrupt handler. The "link change" flag is set in the interrupt status register, causing phylib to eventually call phy_suspend(). Because the net_device is detached from the PHY already, the PHY driver can't recognize that WoL is configured and powers down the PHY. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/fe732c2c-a473-9088-3974-df83cfbd6efd@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGSSabyrzhan Tasbolatov
syzbot found WARNING in rds_rdma_extra_size [1] when RDS_CMSG_RDMA_ARGS control message is passed with user-controlled 0x40001 bytes of args->nr_local, causing order >= MAX_ORDER condition. The exact value 0x40001 can be checked with UIO_MAXIOV which is 0x400. So for kcalloc() 0x400 iovecs with sizeof(struct rds_iovec) = 0x10 is the closest limit, with 0x10 leftover. Same condition is currently done in rds_cmsg_rdma_args(). [1] WARNING: mm/page_alloc.c:5011 [..] Call Trace: alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267 alloc_pages include/linux/gfp.h:547 [inline] kmalloc_order+0x2e/0xb0 mm/slab_common.c:837 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853 kmalloc_array include/linux/slab.h:592 [inline] kcalloc include/linux/slab.h:621 [inline] rds_rdma_extra_size+0xb2/0x3b0 net/rds/rdma.c:568 rds_rm_size net/rds/send.c:928 [inline] Reported-by: syzbot+1bd2b07f93745fa38425@syzkaller.appspotmail.com Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Link: https://lore.kernel.org/r/20210201203233.1324704-1-snovitoll@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: mvpp2: TCAM entry enable should be written after SRAM dataStefan Chulski
Last TCAM data contains TCAM enable bit. It should be written after SRAM data before entry enabled. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1612172139-28343-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Merge tag 'ti-k3-maintainer-for-v5.12' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/fixes Maintainer changes for TI for v5.12 merge window: - Tero switches to kernel.org address * tag 'ti-k3-maintainer-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: MAINTAINERS: Update my email address and maintainer level status Link: https://lore.kernel.org/r/20210130131411.afna4wj72r7xscqn@skinny Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02net: lapb: Copy the skb before sending a packetXie He
When sending a packet, we will prepend it with an LAPB header. This modifies the shared parts of a cloned skb, so we should copy the skb rather than just clone it, before we prepend the header. In "Documentation/networking/driver.rst" (the 2nd point), it states that drivers shouldn't modify the shared parts of a cloned skb when transmitting. The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called when an skb is being sent, clones the skb and sents the clone to AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte pseudo-header before handing over the skb to us, if we don't copy the skb before prepending the LAPB header, the first byte of the packets received on AF_PACKET sockets can be corrupted. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20210201055706.415842-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Merge tag 'mac80211-for-net-2021-02-02' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Two fixes: - station rate tables were not updated correctly after association, leading to bad configuration - rtl8723bs (staging) was initializing data incorrectly after the previous fix and needed to move the init later * tag 'mac80211-for-net-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: staging: rtl8723bs: Move wiphy setup to after reading the regulatory settings from the chip mac80211: fix station rate table updates on assoc ==================== Link: https://lore.kernel.org/r/20210202143505.37610-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02drm/i915/dp: Fix LTTPR vswing/pre-emp setting in non-transparent modeImre Deak
The DP PHY vswing/pre-emphasis level programming the driver does is related to the DPTX -> first LTTPR link segment only. Accordingly it should be only programmed when link training the first LTTPR and kept as-is when training subsequent LTTPRs and the DPRX. For these latter PHYs the vs/pe levels will be set in response to writing the DP_TRAINING_LANEx_SET_PHY_REPEATERy DPCD registers (by an upstream LTTPR TX PHY snooping this write access of its downstream LTTPR/DPRX RX PHY). The above is also described in DP Standard v2.0 under 3.6.6.1. While at it simplify and add the LTTPR that is link trained to the debug message in intel_dp_set_signal_levels(). Fixes: b30edfd8d0b4 ("drm/i915: Switch to LTTPR non-transparent mode link training") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-2-imre.deak@intel.com (cherry picked from commit 67fba3f1c73b83569d171ae1fa463a537bbfe0a8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/i915/dp: Move intel_dp_set_signal_levels() to intel_dp_link_training.cImre Deak
intel_dp_set_signal_levels() is needed for link training, so move it to intel_dp_link_training.c. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-1-imre.deak@intel.com (cherry picked from commit 1c6e527d6947ea77bebabe15bbeaa765a87b70ca) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/i915: Fix the MST PBN divider calculationImre Deak
Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit) value for MST streams if the link parameters (link rate or lane count) are limited in a way independent of the sink capabilities (reported by DPCD). One example of such a limitation is when a MUX between the sink and source connects only a limited number of lanes to the display and connects the rest of the lanes to other peripherals (USB). Another issue is that atm MST core calculates the divider based on the backwards compatible DPCD (at address 0x0000) vs. the extended capability info (at address 0x2200). This can result in leaving some part of the MST BW unused (For instance in case of the WD19TB dock). Fix the above two issues by calculating the PBN divider value based on the rate and lane count link parameters that the driver uses for all other computation. Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977 Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjala <ville.syrjala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com (cherry picked from commit b59c27cab257cfbff939615a87b72bce83925710) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/dp/mst: Export drm_dp_get_vc_payload_bw()Imre Deak
This function will be needed by the next patch where the driver calculates the BW based on driver specific parameters, so export it. At the same time sanitize the function params, passing the more natural link rate instead of the encoding of the same rate. v2: - Fix function documentation. (Lyude) Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com (cherry picked from commit a321fc2b4e60fc1b39517d26c8104351636a6062) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02iommu: Check dev->iommu in dev_iommu_priv_get() before dereferencing itJoerg Roedel
The dev_iommu_priv_get() needs a similar check to dev_iommu_fwspec_get() to make sure no NULL-ptr is dereferenced. Fixes: 05a0542b456e1 ("iommu/amd: Store dev_data as device iommu private data") Cc: stable@vger.kernel.org # v5.8+ Link: https://lore.kernel.org/r/20210202145419.29143-1-joro@8bytes.org Reference: https://bugzilla.kernel.org/show_bug.cgi?id=211241 Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-02tracepoint: Fix race between tracing and removing tracepointAlexey Kardashevskiy
When executing a tracepoint, the tracepoint's func is dereferenced twice - in __DO_TRACE() (where the returned pointer is checked) and later on in __traceiter_##_name where the returned pointer is dereferenced without checking which leads to races against tracepoint_removal_sync() and crashes. This adds a check before referencing the pointer in tracepoint_ptr_deref. Link: https://lkml.kernel.org/r/20210202072326.120557-1-aik@ozlabs.ru Cc: stable@vger.kernel.org Fixes: d25e37d89dd2f ("tracepoint: Optimize using static_call()") Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-02drm/i915/gem: Drop lru bumping on display unpinningChris Wilson
Simplify the frontbuffer unpin by removing the lock requirement. The LRU bumping was primarily to protect the GTT from being evicted and from frontbuffers being eagerly shrunk. Now we protect frontbuffers from the shrinker, and we avoid accidentally evicting from the GTT, so the benefit from bumping LRU is no more, and we can save more time by not. Reported-and-tested-by: Matti Hämäläinen <ccr@tnsp.org> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2905 Fixes: c1793ba86a41 ("drm/i915: Add ww locking to pin_to_display_plane, v2.") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-6-chris@chris-wilson.co.uk (cherry picked from commit 14ca83eece9565a2d2177291ceb122982dc38420) Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/i915/gt: Close race between enable_breadcrumbs and cancel_breadcrumbsChris Wilson
If we enable_breadcrumbs for a request while that request is being removed from HW; we may see that the request is active as we take the ce->signal_lock and proceed to attach the request to ce->signals. However, during unsubmission after marking the request as inactive, we see that the request has not yet been added to ce->signals and so skip the removal. Pull the check during cancel_breadcrumbs under the same spinlock as enabling so that we the two tests are consistent in enable/cancel. Otherwise, we may insert a request onto ce->signals that we expect should not be there: intel_context_remove_breadcrumbs:488 GEM_BUG_ON(!__i915_request_is_complete(rq)) While updating, we can note that we are always called with irqs-disabled, due to the engine->active.lock being held at the single caller, and so remove the irqsave/restore making it symmetric to enable_breadcrumbs. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2931 Fixes: c18636f76344 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: <stable@vger.kernel.org> # v5.10+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210119162057.31097-1-chris@chris-wilson.co.uk (cherry picked from commit e7004ea4f5f528f5a5018f0b70cab36d25315498) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/i915/gt: Move the breadcrumb to the signaler if completed upon cancelChris Wilson
If while we are cancelling the breadcrumb signaling, we find that the request is already completed, move it to the irq signaler and let it be signaled. v2: Tweak reference counting so that we only acquire a new reference on adding to a signal list, as opposed to a hidden i915_request_put of the caller's reference. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-5-chris@chris-wilson.co.uk (cherry picked from commit 85cc2917a3965a3a747a6407d6e3028cfeb1534e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02powerpc/64/signal: Fix regression in __kernel_sigtramp_rt64() semanticsRaoni Fassina Firmino
Commit 0138ba5783ae ("powerpc/64/signal: Balance return predictor stack in signal trampoline") changed __kernel_sigtramp_rt64() VDSO and trampoline code, and introduced a regression in the way glibc's backtrace()[1] detects the signal-handler stack frame. Apart from the practical implications, __kernel_sigtramp_rt64() was a VDSO function with the semantics that it is a function you can call from userspace to end a signal handling. Now this semantics are no longer valid. I believe the aforementioned change affects all releases since 5.9. This patch tries to fix both the semantics and practical aspect of __kernel_sigtramp_rt64() returning it to the previous code, whilst keeping the intended behaviour of 0138ba5783ae by adding a new symbol to serve as the jump target from the kernel to the trampoline. Now the trampoline has two parts, a new entry point and the old return point. [1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2021-January/223194.html Fixes: 0138ba5783ae ("powerpc/64/signal: Balance return predictor stack in signal trampoline") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Raoni Fassina Firmino <raoni@linux.ibm.com> Acked-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Minor tweaks to change log formatting, add stable tag] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210201200505.iz46ubcizipnkcxe@work-tp
2021-02-02drm/i915/display: Prevent double YUV range correction on HDR planesAndres Calderon Jaramillo
Prevent the ICL HDR plane pipeline from performing YUV color range correction twice when the input is in limited range. This is done by removing the limited-range code from icl_program_input_csc(). Before this patch the following could happen: user space gives us a YUV buffer in limited range; per the pipeline in [1], the plane would first go through a "YUV Range correct" stage that expands the range; the plane would then go through the "Input CSC" stage which would also expand the range because icl_program_input_csc() would use a matrix and an offset that assume limited-range input; this would ultimately cause dark and light colors to appear darker and lighter than they should respectively. This is an issue because if a buffer switches between being scanned out and being composited with the GPU, the user will see a color difference. If this switching happens quickly and frequently, the user will perceive this as a flickering. [1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281 Cc: stable@vger.kernel.org Signed-off-by: Andres Calderon Jaramillo <andrescj@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215224219.3896256-1-andrescj@google.com (cherry picked from commit fed387572040e84ead53852a7820e30a30e515d0) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210202084553.30691-1-ville.syrjala@linux.intel.com
2021-02-02update the email address for Keith BushKeith Busch
Redirect my older email addresses that are in the git logs. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-02nvme-pci: ignore the subsysem NQN on Phison E16Claus Stovgaard
Tested both with Corsairs firmware 11.3 and 13.0 for the Corsairs MP600 and both have the issue as reported by the kernel. nvme nvme0: missing or invalid SUBNQN field. Signed-off-by: Claus Stovgaard <claus.stovgaard@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-02nvme-pci: avoid the deepest sleep state on Kingston A2000 SSDsThorsten Leemhuis
Some Kingston A2000 NVMe SSDs sooner or later get confused and stop working when they use the deepest APST sleep while running Linux. The system then crashes and one has to cold boot it to get the SSD working again. Kingston seems to known about this since at least mid-September 2020: https://bbs.archlinux.org/viewtopic.php?pid=1926994#p1926994 Someone working for a German company representing Kingston to the German press confirmed to me Kingston engineering is aware of the issue and investigating; the person stated that to their current knowledge only the deepest APST sleep state causes trouble. Therefore, make Linux avoid it for now by applying the NVME_QUIRK_NO_DEEPEST_PS to this SSD. I have two such SSDs, but it seems the problem doesn't occur with them. I hence couldn't verify if this patch really fixes the problem, but all the data in front of me suggests it should. This patch can easily be reverted or improved upon if a better solution surfaces. FWIW, there are many reports about the issue scattered around the web; most of the users disabled APST completely to make things work, some just made Linux avoid the deepest sleep state: https://bugzilla.kernel.org/show_bug.cgi?id=195039#c65 https://bugzilla.kernel.org/show_bug.cgi?id=195039#c73 https://bugzilla.kernel.org/show_bug.cgi?id=195039#c74 https://bugzilla.kernel.org/show_bug.cgi?id=195039#c78 https://bugzilla.kernel.org/show_bug.cgi?id=195039#c79 https://bugzilla.kernel.org/show_bug.cgi?id=195039#c80 https://askubuntu.com/questions/1222049/nvmekingston-a2000-sometimes-stops-giving-response-in-ubuntu-18-04dell-inspir https://community.acer.com/en/discussion/604326/m-2-nvme-ssd-aspire-517-51g-issue-compatibility-kingston-a2000-linux-ubuntu For the record, some data from 'nvme id-ctrl /dev/nvme0' NVME Identify Controller: vid : 0x2646 ssvid : 0x2646 mn : KINGSTON SA2000M81000G fr : S5Z42105 [...] ps 0 : mp:9.00W operational enlat:0 exlat:0 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- ps 1 : mp:4.60W operational enlat:0 exlat:0 rrt:1 rrl:1 rwt:1 rwl:1 idle_power:- active_power:- ps 2 : mp:3.80W operational enlat:0 exlat:0 rrt:2 rrl:2 rwt:2 rwl:2 idle_power:- active_power:- ps 3 : mp:0.0450W non-operational enlat:2000 exlat:2000 rrt:3 rrl:3 rwt:3 rwl:3 idle_power:- active_power:- ps 4 : mp:0.0040W non-operational enlat:15000 exlat:15000 rrt:4 rrl:4 rwt:4 rwl:4 idle_power:- active_power:- Cc: stable@vger.kernel.org # 4.14+ Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-02-02drm/i915: Power up combo PHY lanes for for HDMI as wellVille Syrjälä
Currently we only explicitly power up the combo PHY lanes for DP. The spec says we should do it for HDMI as well. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 1e0cb7bef35f0d1aed383bf69a209df218b807c9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/i915: Extract intel_ddi_power_up_lanes()Ville Syrjälä
Reduce the copypasta by pulling the combo PHY lane power up stuff into a helper. We'll have a third user soon. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 5cdf706fb91a6e4e6af799bb957c4d598e6a067b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-02drm/i915: Skip vswing programming for TBTVille Syrjälä
In thunderbolt mode the PHY is owned by the thunderbolt controller. We are not supposed to touch it. So skip the vswing programming as well (we already skipped the other steps not applicable to TBT). Touching this stuff could supposedly interfere with the PHY programming done by the thunderbolt controller. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit f8c6b615b921d8a1bcd74870f9105e62b0bceff3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-01net/mlx5e: Release skb in case of failure in tc update skbMaor Dickman
In case of failure in tc update skb the packet is dropped without freeing the skb. Fixed by freeing the skb in case failure in tc update skb. Fixes: d6d27782864f ("net/mlx5: E-Switch, Restore chain id on miss") Fixes: c75690972228 ("net/mlx5e: Add tc chains offload support for nic flows") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: Update max_opened_tc also when channels are closedMaxim Mikityanskiy
max_opened_tc is used for stats, so that potentially non-zero stats won't disappear when num_tc decreases. However, mlx5e_setup_tc_mqprio fails to update it in the flow where channels are closed. This commit fixes it. The new value of priv->channels.params.num_tc is always checked on exit. In case of errors it will just be the old value, and in case of success it will be the updated value. Fixes: 05909babce53 ("net/mlx5e: Avoid reset netdev stats on configuration changes") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5: Fix leak upon failure of rule creationMaor Gottlieb
When creation of a new rule that requires allocation of an FTE fails, need to call to tree_put_node on the FTE in order to release its' resource. Fixes: cefc23554fc2 ("net/mlx5: Fix FTE cleanup") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5: Fix function calculation for page treesDaniel Jurgens
The function calculation always results in a value of 0. This works generally, but when the release all pages feature is enabled it will result in crashes. Fixes: 0aa128475d33 ("net/mlx5: Maintain separate page trees for ECPF and PF functions") Signed-off-by: Daniel Jurgens <danielj@nvidia.com> Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5: DR, Avoid unnecessary csum recalculation on supporting devicesYevgeny Kliteynik
If as part of the actions the TTL of the packet is modified, the packet's checksum needs to be recalculated. Connect-X6DX can handle this csum recalculation natively. Older devices require this additional recalculation. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: CT: remove useless conversion to PTR_ERR then ERR_PTRSaeed Mahameed
Just return the ptr directly. Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: accel, remove redundant spaceSaeed Mahameed
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: kTLS, Improve TLS RX workqueue scopeTariq Toukan
The TLS RX workqueue is needed only when kTLS RX device offload is supported. Move its creation from the general TLS init function to the kTLS RX init. Create it once at init time if supported, avoid creation/destroy everytime the feature bit is toggled. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: remove h from printk format specifierTom Rix
This change fixes the checkpatch warning described in this commit commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") Standard integer promotion is already done and %hx and %hhx is useless so do not encourage the use of %hh[xudi] or %h[xudi]. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: Increase indirection RQ table size to 256Noam Stolero
Increasing the indirection RQ table size from 128 to 256 improves the packet distribution over the NIC HW queues for various cases. Let's take a look at the following scenario: Assuming RSS result distributed uniformly and indirection table is filled with queues in a cyclic manner. Let N be the number of queues on a given setup. If 256%N = 128%N = 0, then all queues have the same probability to be chosen for a given RSS result. This case doesn't improves nor degrade by this change. If 256%N != 0 and 128%N != 0, there is a remainder which will favor some queues. Increasing the indirection RQ table size to 256 reduce the ratio between the favored queues probability to be selected to the rest of the queues and improves the distribution. For example, let's assume the number of queues is 56. For a table size of 128, we have 128%56=16 queues which will have a 3/128 probability to be chosen and 2/128 for the rest 40. 16 queues have 1.5 times the probability to be chosen over the other 40. For a table size of 256, we have 256%56=32 queues which will have a 5/256 probability to be chosen and 4/256 probability for the rest 24 queues. Here 32 queues have 1.25 more probability to be chosen over the other 24. This shows that the larger indirection table size would more likely cause an even distribution. This change also aligns our mlx5 driver's indirection table size with other vendors. Signed-off-by: Noam Stolero <noams@nvidia.com> Reviewed-by: Tal Gilboa <talgi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: Enable napi in channel's activation stageTariq Toukan
The channel's napi is first needed upon activation, not creation. Minimize its enabled scope by moving it from the channel's open/close stage into the activate/deactivate stage. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: Move representor neigh init into profile enableRoi Dayan
Also cleanup neigh in profile disable. This is for logical separation. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: Avoid false lock depenency warning on tc_htRoi Dayan
To avoid false lock dependency warning set the tc_ht lock class different than the lock class of the ht being used when deleting last flow from a group and then deleting a group, we get into del_sw_flow_group() which call rhashtable_destroy on fg->ftes_hash which will take ht->mutex but it's different than the ht->mutex here. ====================================================== WARNING: possible circular locking dependency detected 5.11.0-rc4_net_next_mlx5_949fdcc #1 Not tainted ------------------------------------------------------ modprobe/12950 is trying to acquire lock: ffff88816510f910 (&node->lock){++++}-{3:3}, at: mlx5_del_flow_rules+0x2a/0x210 [mlx5_core] but task is already holding lock: ffff88815834e3e8 (&ht->mutex){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x37/0x340 which lock already depends on the new lock. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: Move set vxlan nic info to profile initRoi Dayan
Since its profile dependent let's init the vxlan info as part of profile initialization. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: Move netif_carrier_off() out of mlx5e_priv_init()Roi Dayan
It's not part of priv initialization. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mlx5e: Refactor mlx5e_netdev_init/cleanup to mlx5e_priv_init/cleanupRoi Dayan
We actually initialize priv and not netdev. The only call to set netdev carrier will be moved in the following commit. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-01net/mxl5e: Add change profile methodSaeed Mahameed
Port nic netdevice will be used as uplink representor in downstream patches. Add change profile method to allow changing a mlx5e netdevice profile dynamically. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com>
2021-02-01net/mlx5e: Separate between netdev objects and mlx5e profiles initializationSaeed Mahameed
1) Initialize netdevice features and structures on netdevice allocation and outside of the mlx5e profile. 2) As now mlx5e netdevice private params will be setup on profile init only after netdevice features are already set, we add a call to netde_update_features() to resolve any conflict. This is nice since we reuse the fix_features ndo code if a profile wants different default features, instead of duplicating features conflict resolution code on profile initialization. 3) With this we achieve total separation between mlx5e profiles and netdevices, and will allow replacing mlx5e profiles on the fly to reuse the same netdevice for multiple profiles. e.g. for uplink representor profile as shown in the following patch 4) Profile callbacks are not allowed to touch netdev->features directly anymore, since in downstream patch we will detach/attach netdev dynamically to profile, hence we move the code dealing with netdev->features from profile->init() to fix_features ndo, and we will call netdev_update_features() on mlx5e_attach_netdev(profile, netdev); Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com>
2021-02-01smb3: Fix out-of-bounds bug in SMB2_negotiate()Gustavo A. R. Silva
While addressing some warnings generated by -Warray-bounds, I found this bug that was introduced back in 2017: CC [M] fs/cifs/smb2pdu.o fs/cifs/smb2pdu.c: In function ‘SMB2_negotiate’: fs/cifs/smb2pdu.c:822:16: warning: array subscript 1 is above array bounds of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds] 822 | req->Dialects[1] = cpu_to_le16(SMB30_PROT_ID); | ~~~~~~~~~~~~~^~~ fs/cifs/smb2pdu.c:823:16: warning: array subscript 2 is above array bounds of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds] 823 | req->Dialects[2] = cpu_to_le16(SMB302_PROT_ID); | ~~~~~~~~~~~~~^~~ fs/cifs/smb2pdu.c:824:16: warning: array subscript 3 is above array bounds of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds] 824 | req->Dialects[3] = cpu_to_le16(SMB311_PROT_ID); | ~~~~~~~~~~~~~^~~ fs/cifs/smb2pdu.c:816:16: warning: array subscript 1 is above array bounds of ‘__le16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds] 816 | req->Dialects[1] = cpu_to_le16(SMB302_PROT_ID); | ~~~~~~~~~~~~~^~~ At the time, the size of array _Dialects_ was changed from 1 to 3 in struct validate_negotiate_info_req, and then in 2019 it was changed from 3 to 4, but those changes were never made in struct smb2_negotiate_req, which has led to a 3 and a half years old out-of-bounds bug in function SMB2_negotiate() (fs/cifs/smb2pdu.c). Fix this by increasing the size of array _Dialects_ in struct smb2_negotiate_req to 4. Fixes: 9764c02fcbad ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)") Fixes: d5c7076b772a ("smb3: add smb3.1.1 to default dialect list") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-02-01Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-02-01 This series contains updates to igc and i40e drivers. Kai-Heng Feng fixes igc to report unknown speed and duplex during suspend as an attempted read will cause errors. Kevin Lo sets the default value to -IGC_ERR_NVM instead of success for writing shadow RAM as this could miss a timeout. Also propagates the return value for Flow Control configuration to properly pass on errors for igc. Aleksandr reverts commit 2ad1274fa35a ("i40e: don't report link up for a VF who hasn't enabled queues") as this can cause link flapping. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Revert "i40e: don't report link up for a VF who hasn't enabled queues" igc: check return value of ret_val in igc_config_fc_after_link_up igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr igc: Report speed and duplex as unknown when device is runtime suspended ==================== Link: https://lore.kernel.org/r/20210201214618.852831-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01Merge branch 'rework-the-memory-barrier-for-scrq-entry'Jakub Kicinski
Lijun Pan says: ==================== rework the memory barrier for SCRQ entry This series rework the memory barrier for SCRQ (Sub-Command-Response Queue) entry. ==================== Link: https://lore.kernel.org/r/20210130011905.1485-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01ibmvnic: remove unnecessary rmb() inside ibmvnic_pollLijun Pan
rmb() can be removed since: 1. pending_scrq() has dma_rmb() at the function end; 2. dma_rmb(), though weaker, is enough here. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Acked-by: Dwip Banerjee <dnbanerg@us.ibm.com> Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-18 12:41:49 +0000