summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-18ARM: S5PV210: Add audio platform devicesJassi Brar
Define platform devices for all audio devices found on S5PV210 Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SAMSUNG: Fix additional increment when running through gpiosBen Dooks
The pm-gpio.c code was incrementing the gpio_nr from the nr_gpios field and the bank-bank offset inside the loop, and also in the for() loop with a ++. Remove the ++, as the number is already at the next GPIO, thus ensuring that we don't skip a gpio bank by accident. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C24XX: Add note on GPIO bank sizesBen Dooks
Add a table for the GPIO bank sizes for each SoC Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C24XX: Remove macros mapping GPIO number to baseBen Dooks
As part of the cleanup, remove the old macros mapping GPIO numbers to the base of the register now we have gpiolib to manage the GPIO mappings for us. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C24XX: Update missed gpio calls to use gpiolibBen Dooks
Update a couple of S3C24XX and S3C2412 files that are still using the GPIO number to register mapping calls to get the s3c_gpio_chip and use the base field from that. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C24XX: Start cleanup of GPIO numberingBen Dooks
Start cleaning up the numbering of GPIO banks by removing the old bank start definitions currently being used by some of the header files. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C244X: fix gpiolib port J supportVasily Khoruzhick
Increase GPIOs number for S3C244X, and make S3C_GPIO_END point to BANKJ end, otherwise gpiolib refuses to register BANKJ Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [ben-linux@fluff.org: Move pm fix to new patch] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SMDK2416: Add support for framebuffer device and ensure correct setupBen Dooks
Add support for the LCD display on the SMDJK2416, and correctly name the framebuffer device. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SAMSUNG: Set S3C_FB_MAX_WIN in <plat/fb.h>Ben Dooks
Move the S3C_FB_MAX_WIN to the platform data to avoid having to include the registers with the platform data. Set S3C_FB_MAX_WIN to 5, which is the maximum that any of the current hardware can do and the cost of having it set to this for all is minimal (at least for the platform data case), then always leave this as the maximum for the systems supported. Also remove the inclusion of <mach/regs-fb.h> from the device definition in arch/arm/plat-samsung Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C2443: Fix definition of LCD clock bitBen Dooks
Fix the definition of the LCD clock bit, it is the TFT display controller on bit 9, not the older STN on bit 10. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C2443: Add initial defines for framebuffer supportBen Dooks
Add the necessary defines to get the s3c-fb device to compile for s3c2443. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C64XX: Add USB external clock definitionMaurus Cuelenaere
This adds the xusbxti clock to S3C64XX platform. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18sh: update defconfigs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-18sh: Fix up the NUMA build for recent LMB changes.Paul Mundt
Now that the node 0 initialization code has been overhauled, kill off the now obsolete setup_memory() bits. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-18S5PV210: DMA: Add platform devices for PL330 DMACsJassi Brar
Samsung's Soc S5PV210 has three PL330 DMACs. First is dedicated for Memory->Memory data transfer while the other two meant for data transfer with peripherals. Define and add latter two PL330 DMACs as platform devices on the S5PV210 platform. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18S5P6442: DMA: Add platform devices for PL330 DMACsJassi Brar
Samsung's Soc S5P6442 has two PL330 DMACs. First is dedicated for Memory->Memory data transfer while the second is meant for data transfer with peripherals. Define and add the peripheral PL330 DMAC as platform device on the S5P6442 platform. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18S5P6440: DMA: Add platform devices for PL330 DMACsJassi Brar
Samsung's Soc S5P6440 has one PL330 DMAC. Define and add the PL330 DMAC as platform device on the S5P6440 platform. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18S3C: DMA: Add api driver for PL330Jassi Brar
Latest Samsung SoCs have one or more PL330 as their DMACs. This patch implements the S3C DMA API for PL330 core driver. The design has been kept as generic as possible while keeping effort to add support for new SoCs to the minimum possible level. Some of the salient features of this driver are:- o Automatic scheduling of client requests onto DMAC if more than one DMAC can reach the peripheral. Factors, such as current load and number of exclusive but inactive peripherals that are supported by the DMAC, are used to decide suitability of a DMAC for a particular client. o CIRCULAR buffer option is supported. o The driver scales transparently with the number of DMACs and total peripherals in the platform, since all peripherals are added to the peripheral pool and DMACs to the controller pool. For most conservative use of memory, smallest driver size and best performance, we don't employ legacy data structures of the S3C DMA API. That should not have any affect since those data structures are completely invisible to the DMA clients. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: SAMSUNG: Move RTC device definitions in plat-samsungAtul Dahiya
This patch moves RTC device definitions from mach-s3c64xx to plat-samsung, to enable the other SoCs to use same device definition. Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: remove 'select GENERIC_TIME'Russell King
GENERIC_TIME is now enabled by default, so 'select GENERIC_TIME' is redundant. Remove them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-18sh64: provide a stub per_cpu_trap_init() definition.Paul Mundt
This is needed to fix up the build at the moment. Gradually this will be reworked to follow the 32-bit initialization path and deal with delayed VBR initialization. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-17ARCNET: Limit com20020 PCI ID matches for SOHARD cardsAndreas Bombe
The SH SOHARD ARCNET cards are implemented using generic PLX Technology PCI<->IOBus bridges. Subvendor and subdevice IDs were not specified, causing the driver to attach to any such bridge and likely crash the system by attempting to initialize an unrelated device. Fix by specifying subvendor and subdevice according to the values found in the PCI-ID Repository at http://pci-ids.ucw.cz/ . Cc: stable@kernel.org Signed-off-by: Andreas Bombe <aeb@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net: Remove unnecessary returns from void function()sJoe Perches
This patch removes from net/ (but not any netfilter files) all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net sched: cleanup and rate limit warningstephen hemminger
If the user has a bad classification configuration, and gets a packet that goes through too many steps. Chances are more packets will arrive, and the message spew will overrun syslog because it is not rate limited. And because it is not tagged with appropriate priority it can't not be screened. Added the qdisc to the message to try and give some more context when the message does arrive. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17pfkey: add severity to printkstephen hemminger
Put severity level on pfkey printk messages Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17xfrm: add severity to printkstephen hemminger
Serious oh sh*t messages converted to WARN(). Add KERN_NOTICE severity to the unknown policy type messages. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net sched: printk message severitystephen hemminger
The previous patch encourage me to go look at all the messages in the network scheduler and fix them. Many messages were missing any severity level. Some serious ones that should never happen were turned into WARN(), and the random noise messages that were handled changed to pr_debug(). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17cleanup: remove pppoe_ioctl() declaration.Rami Rosen
Hi, - This patch removes pppoe_ioctl() declaration in drivers/net/pppoe.c as it is unneeded. Regards, Rami Rosen Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net: Use kcalloc or kzallocJulia Lawall
Use kcalloc or kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y,flags; statement S; type T; @@ x = - kmalloc + kcalloc ( - y * sizeof(T), + y, sizeof(T), flags); if (x == NULL) S -memset(x, 0, y * sizeof(T)); @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net/vmxnet3: Use kzallocJulia Lawall
Use kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net/caif: Use kzallocJulia Lawall
Use kzalloc rather than the combination of kmalloc and memset. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net: Use kzallocJulia Lawall
Use kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18sh: fix up CONFIG_KEXEC=n build.Paul Mundt
The reserve_crashkernel() definition is in asm/kexec.h which is only dragged in via linux/kexec.h if CONFIG_KEXEC is set. Just switch over to asm/kexec.h unconditionally to fix up the build. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-17sctp: fix append error cause to ERROR chunk correctlyWei Yongjun
commit 5fa782c2f5ef6c2e4f04d3e228412c9b4a4c8809 sctp: Fix skb_over_panic resulting from multiple invalid \ parameter errors (CVE-2010-1173) (v4) cause 'error cause' never be add the the ERROR chunk due to some typo when check valid length in sctp_init_cause_fixed(). Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Reviewed-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net: Add ndo_{set|get}_vf_port support for enic dynamic vnicsScott Feldman
Add enic ndo_{set|get}_vf_port ops to support setting/getting port-profile for enic dynamic devices. Enic dynamic devices are just like normal enic eth devices except dynamic enics require an extra configuration step to assign a port-profile identifier to the interface before the interface is useable. Once a port-profile is assigned, link comes up on the interface and is ready for I/O. The port-profile is used to configure the network port assigned to the interface. The network port configuration includes VLAN membership, QoS policies, and port security settings typical of a data center network. A dynamic enic initially has a zero-mac address. Before a port-profile is assigned, a valid non-zero unicast mac address should be assign to the dynamic enic interface. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
2010-05-17net: Add netlink support for virtual port management (was iovnl)Scott Feldman
Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/net: remove useless semicolonsJoe Perches
switch and while statements don't need semicolons at end of statement [ Fixup minor conflicts with recent wimax merge... -DaveM ] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17qeth: support the new OSA CHPID types OSX and OSMUrsula Braun
The qeth driver is enabled to support the new OSA CHPID types OSX and OSM. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17drivers/s390/net: Drop memory allocation castJulia Lawall
Drop cast on the result of kmalloc and similar functions. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; @@ - (T *) (\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17pegasus: fix USB device ID for ETX-US2Tadashi Abe
USB device ID definition for I-O Data ETX-US2 is wrong. Correct ID is 0x093a. Here's snippet from /proc/bus/usb/devices; T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04bb ProdID=093a Rev= 1.01 S: Manufacturer=I-O DATA DEVICE,INC. S: Product=I-O DATA ETX2-US2 S: SerialNumber=A26427 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=224mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=pegasus E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=125us This patch enables pegasus driver to work fine with ETX-US2. Signed-off-by: Tadashi Abe <tabe@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17can: sja1000 platform data fixesWolfgang Grandegger
The member "clock" of struct "sja1000_platform_data" is documented as "CAN bus oscillator frequency in Hz" but it's actually used as the CAN clock frequency, which is half of it. To avoid further confusion, this patch fixes it by renaming the member to "osc_freq". That way, also non mainline users will notice the change. The platform code for the relevant boards is updated accordingly. Furthermore, pre-defined values are now used for the members "ocr" and "cdr". Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17net: Introduce skb_tunnel_rx() helperEric Dumazet
skb rxhash should be cleared when a skb is handled by a tunnel before being delivered again, so that correct packet steering can take place. There are other cleanups and accounting that we can factorize in a new helper, skb_tunnel_rx() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17tcp: tcp_synack_options() fix Eric Dumazet
Commit 33ad798c924b4a (tcp: options clean up) introduced a problem if MD5+SACK+timestamps were used in initial SYN message. Some stacks (old linux for example) try to negotiate MD5+SACK+TSTAMP sessions, but since 40 bytes of tcp options space are not enough to store all the bits needed, we chose to disable timestamps in this case. We send a SYN-ACK _without_ timestamp option, but socket has timestamps enabled and all further outgoing messages contain a TS block, all with the initial timestamp of the remote peer. Fix is to really disable timestamps option for the whole session. Reported-by: Bijay Singh <Bijay.Singh@guavus.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17ipv6: fix the bug of address checkStephen Hemminger
The duplicate address check code got broken in the conversion to hlist (2.6.35). The earlier patch did not fix the case where two addresses match same hash value. Use two exit paths, rather than depending on state of loop variables (from macro). Based on earlier fix by Shan Wei. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ARM: SAMSUNG: Moving ADC device definition to plat-samsung.Naveen Krishna
This patch moves ADC device definition to plat-samsung. Because that is generic to the S3C64XX and S5P Series SoCs. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-17Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-05-18V4L/DVB: cx88: Only start IR if the input device is openedMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: ir-core: Add callbacks for input/evdev open/close on IR coreMauro Carvalho Chehab
Especially when IR needs to do polling, it generates lots of wakeups per second. This makes no sense, if the input event device is closed. Adds a callback handler to the IR hardware driver, to allow registering an open/close ops. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: ir-core: rename sysfs remote controller class from ir to rcMauro Carvalho Chehab
IR is an alias for Infrared Remote, while RC is an alias for Remote Controller. While currently all implementations are with Infrared Remote Controller, this subsystem is not meant to be used only by IR type of RC's. So, as discussed on both linux-media and linux-input, the better is to rename the subsystem as Remote Controller. While, currently, the only application that uses the /sys/class/irrcv is ir-keytable application, and its sysfs support works only with the current linux-next code, it is still possible to change the userspace API without the risk of breaking applications. So, better to rename this sooner than later. Later patches will be needed to rename the files and to move them away from drivers/media, but this is not a critical issue. So, for now, let's just change the name of the sysfs class/nodes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: saa7134: clear warning noiseMauro Carvalho Chehab
drivers/media/video/saa7134/saa7134-input.c: In function ‘saa7134_raw_decode_irq’: drivers/media/video/saa7134/saa7134-input.c:957: warning: unused variable ‘oldpulse’ drivers/media/video/saa7134/saa7134-input.c:957: warning: unused variable ‘count’ Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-15 08:09:50 +0000