summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-08powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.SChristophe Leroy
head_book3s_32.S is only built when CONFIG_PPC_BOOK3S_32 is selected. Remove all conditions based on CONFIG_PPC_BOOK3S_32 in the file. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1b68632425d8866d147aea9005004e4594672211.1601975100.git.christophe.leroy@csgroup.eu
2020-10-08powerpc/32s: Rename head_32.S to head_book3s_32.SChristophe Leroy
Unlike PPC64 which had a single head_64.S, PPC32 are multiple ones. There is the head_32.S, selected by default based on the value of BITS and overridden based on some CONFIG_ values. This leads to thinking that it may be selected by different types of PPC32 platform but indeed it ends up being selected by book3s/32 only. Make that explicit by: - Not doing any default selection based on BITS. - Renaming head_32.S to head_book3s_32.S. - Get head_book3s_32.S selected only by CONFIG_PPC_BOOK3S_32. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Fix head_$(BITS).o reference in arch/powerpc/Makefile] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/319d379f696412681c66a987cc75e6abf8f958d2.1601975100.git.christophe.leroy@csgroup.eu
2020-10-08powerpc/32s: Setup the early hash table at all time.Christophe Leroy
At the time being, an early hash table is set up when CONFIG_KASAN is selected. There is nothing wrong with setting such an early hash table all the time, even if it is not used. This is a statically allocated 256 kB table which lies in the init data section. This makes the code simpler and may in the future allow to setup early IO mappings with fixmap instead of hard coding BATs. Put create_hpte() and flush_hash_pages() in the .ref.text section in order to avoid warning for the reference to early_hash[]. This reference is removed by MMU_init_hw_patch() before init memory is freed. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b8f8101c368b8a6451844a58d7bd7d83c14cf2aa.1601566529.git.christophe.leroy@csgroup.eu
2020-10-08powerpc/time: Remove ifdef in get_dec() and set_dec()Christophe Leroy
Move SPRN_PIT definition in reg.h. This allows to remove ifdef in get_dec() and set_dec() and makes them more readable. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3c9a6eb0fc040868ac59be66f338d08fd017668d.1601549945.git.christophe.leroy@csgroup.eu
2020-10-08powerpc: Remove get_tb_or_rtc()Christophe Leroy
601 is gone, get_tb_or_rtc() is equivalent to get_tb(). Replace the former by the later. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3e8a13ee83418630c753c30cb722ae682d5b2d39.1601362098.git.christophe.leroy@csgroup.eu
2020-10-08powerpc: Remove __USE_RTC()Christophe Leroy
Now that PowerPC 601 is gone, __USE_RTC() is never true. Remove it. That also leads to removing get_rtc() and get_rtcl() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4757e1ed21fe1968c761ae081d1f3d790a9673f8.1601362098.git.christophe.leroy@csgroup.eu
2020-10-08powerpc: Tidy up a bit after removal of PowerPC 601.Christophe Leroy
The removal of the 601 left some standalone blocks from former if/else. Drop the { } and re-indent. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/31c4cd093963f22831bf388449056ee045533d3b.1601362098.git.christophe.leroy@csgroup.eu
2020-10-08powerpc: Remove support for PowerPC 601Christophe Leroy
PowerPC 601 has been retired. Remove all associated specific code. CPU_FTRS_PPC601 has CPU_FTR_COHERENT_ICACHE and CPU_FTR_COMMON. CPU_FTR_COMMON is already present via other CPU_FTRS. None of the remaining CPU selects CPU_FTR_COHERENT_ICACHE. So CPU_FTRS_PPC601 can be removed from the possible features, hence can be removed completely. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/60b725d55e21beec3335175c20b77903ff98284f.1601362098.git.christophe.leroy@csgroup.eu
2020-10-08powerpc: Remove PowerPC 601Christophe Leroy
Powerpc 601 is 25 years old. It is not selected by any defconfig. It requires a lot of special handling as it deviates from the standard 6xx. Retire it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/00a6948d659e017f8ca63437d1384222c3aede57.1601362098.git.christophe.leroy@csgroup.eu
2020-10-08powerpc: Drop SYNC_601() ISYNC_601() and SYNC()Christophe Leroy
Those macros are now empty at all time. Drop them. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7990bb63fc53e460bfa94f8040184881d9e6fbc3.1601362098.git.christophe.leroy@csgroup.eu
2020-10-08powerpc: Remove CONFIG_PPC601_SYNC_FIXChristophe Leroy
This config option isn't in any defconfig. The very first versions of Powerpc 601 have a bug which requires additional sync before and/or after some instructions. This was more than 25 years ago and time has come to retire those buggy versions of the 601 from the kernel. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/55b46bff16705b1ae7bf0a60ccd522b1010ebf75.1601362098.git.christophe.leroy@csgroup.eu
2020-10-08powerpc: Remove SYNC on non 6xxChristophe Leroy
SYNC is usefull for Powerpc 601 only. On everything else, SYNC is empty. Remove it from code that is not made to run on 6xx. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/27951fa6c9a8f80724d1bc81a6117ac32343a55d.1601362098.git.christophe.leroy@csgroup.eu
2020-10-08i2c: meson: fixup rate calculation with filter delayNicolas Belin
Apparently, 15 cycles of the peripheral clock are used by the controller for sampling and filtering. Because this was not known before, the rate calculation is slightly off. Clean up and fix the calculation taking this filtering delay into account. Fixes: 30021e3707a7 ("i2c: add support for Amlogic Meson I2C controller") Signed-off-by: Nicolas Belin <nbelin@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-08i2c: meson: keep peripheral clock enabledJerome Brunet
SCL rate appears to be different than what is expected. For example, We get 164kHz on i2c3 of the vim3 when 400kHz is expected. This is partially due to the peripheral clock being disabled when the clock is set. Let's keep the peripheral clock on after probe to fix the problem. This does not affect the SCL output which is still gated when i2c is idle. Fixes: 09af1c2fa490 ("i2c: meson: set clock divider in probe instead of setting it for each transfer") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-08i2c: meson: fix clock setting overwriteJerome Brunet
When the slave address is written in do_start(), SLAVE_ADDR is written completely. This may overwrite some setting related to the clock rate or signal filtering. Fix this by writing only the bits related to slave address. To avoid causing unexpected changed, explicitly disable filtering or high/low clock mode which may have been left over by the bootloader. Fixes: 30021e3707a7 ("i2c: add support for Amlogic Meson I2C controller") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-08i2c: imx: Fix reset of I2SR_IAL flagChristian Eggers
According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers <ceggers@arri.de> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-08dmaengine: owl-dma: fix kernel-doc style for enumVinod Koul
Driver doesn't use keyword enum for enum owl_dmadesc_offsets resulting in warning: drivers/dma/owl-dma.c:139: warning: cannot understand function prototype: 'enum owl_dmadesc_offsets ' So add the keyword to fix it and also add documentation for missing OWL_DMADESC_SIZE Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201007083113.567559-6-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-08dmaengine: zynqmp_dma: fix kernel-doc style for taskletVinod Koul
Commit f19a11d40a78 ("dmaengine: xilinx: convert tasklets to use new tasklet_setup() API") updated driver to use new tasklet_setup() API but missed to update the documentation for the tasklet function. Fixes: f19a11d40a78 ("dmaengine: xilinx: convert tasklets to use new tasklet_setup() API") Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20201007083113.567559-5-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-08dmaengine: xilinx_dma: fix kernel-doc style for taskletVinod Koul
Commit f19a11d40a78 ("dmaengine: xilinx: convert tasklets to use new tasklet_setup() API") updated driver to use new tasklet_setup() API but missed to update the documentation for the tasklet function. Fixes: f19a11d40a78 ("dmaengine: xilinx: convert tasklets to use new tasklet_setup() API") Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20201007083113.567559-4-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-08dmaengine: qcom: bam_dma: fix kernel-doc style for taskletVinod Koul
Commit 00c4747a2f64 ("dmaengine: qcom: convert tasklets to use new tasklet_setup() API") updated driver to use new tasklet_setup() API but missed to update the documentation for the tasklet function. Fixes: 00c4747a2f64 ("dmaengine: qcom: convert tasklets to use new tasklet_setup() API") Link: https://lore.kernel.org/r/20201007083113.567559-3-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-08dmaengine: altera-msgdma: fix kernel-doc style for taskletVinod Koul
Commit 6752e40d669a ("dmaengine: altera-msgdma: convert tasklets to use new tasklet_setup() API") updated driver to use new tasklet_setup() API but missed to update the documentation for the tasklet function. Fixes: 6752e40d669a ("dmaengine: altera-msgdma: convert tasklets to use new tasklet_setup() API") Link: https://lore.kernel.org/r/20201007083113.567559-2-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-08mmc: renesas_sdhi: workaround a regression when reinserting SD cardsWolfram Sang
After the conversions of the reset routines, re-inserting SD cards didn't work anymore. Apply this temporary workaround to have working SD cards during the merge window. The issue will be fixed properly until the final release. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20201008092533.76588-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-10-08bpf: Fix scalar32_min_max_or bounds trackingDaniel Borkmann
Simon reported an issue with the current scalar32_min_max_or() implementation. That is, compared to the other 32 bit subreg tracking functions, the code in scalar32_min_max_or() stands out that it's using the 64 bit registers instead of 32 bit ones. This leads to bounds tracking issues, for example: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x1; 0x700000000),s32_max_value=1,u32_max_value=1) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] The bound tests on the map value force the upper unsigned bound to be 25769803777 in 64 bit (0b11000000000000000000000000000000001) and then lower one to be 1. By using OR they are truncated and thus result in the range [1,1] for the 32 bit reg tracker. This is incorrect given the only thing we know is that the value must be positive and thus 2147483647 (0b1111111111111111111111111111111) at max for the subregs. Fix it by using the {u,s}32_{min,max}_value vars instead. This also makes sense, for example, for the case where we update dst_reg->s32_{min,max}_value in the else branch we need to use the newly computed dst_reg->u32_{min,max}_value as we know that these are positive. Previously, in the else branch the 64 bit values of umin_value=1 and umax_value=32212254719 were used and latter got truncated to be 1 as upper bound there. After the fix the subreg range is now correct: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Simon Scannell <scannell.smn@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2020-10-08docs: net: 80211: reduce docs build timeMauro Carvalho Chehab
the files under /80211 calls kernel-doc script 207 times, one for each single function and doc chapter. Due to that, it takes a lot of time handling it: $ touch Documentation/driver-api/80211/*rst && time make SPHINXDIRS=driver-api/80211 htmldocs ... real 0m22,928s user 0m21,644s sys 0m1,334s Reduce the build time by doing only one kernel-doc call per functions that belong to the same group. With that, there's now 50 calls to kernel-doc, which makes the build time for those docs 62% faster: $ touch Documentation/driver-api/80211/*rst && time make SPHINXDIRS=driver-api/80211 htmldocs ... real 0m8,666s user 0m8,084s sys 0m0,642s As a side effect, it should now be easier to add newer functions, as there's no need to repeat the kernel-doc pattern. Measurements made on a NUC8i7HNK machine with lots of ram and a fast SSD disk with Sphinx 3.2.1. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/f0085721d85ebc3a77164b457ed948eee48b55df.1601890703.git.mchehab+huawei@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-08cfg80211: only allow S1G channels on S1G bandThomas Pedersen
As discovered by syzbot, cfg80211 was accepting S1G channel widths on non-S1G bands. Add a check for this, and consolidate the 1MHz frequency check as it ends up being a subset of the others. Reported-by: syzbot+92715a0eccd6c881bc32@syzkaller.appspotmail.com Fixes: 11b34737b18a ("nl80211: support setting S1G channels") Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201005165122.17583-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-08mac80211: initialize last_rate for S1G STAsThomas Pedersen
last_rate is initialized to zero by sta_info_alloc(), but this indicates legacy bitrate for the last TX rate (and invalid for the last RX rate). To avoid a warning when decoding the last rate as legacy (before a data frame has been sent), initialize them as S1G MCS. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201005164522.18069-2-thomas@adapt-ip.com [rename to ieee80211_s1g_sta_rate_init(), seems more appropriate] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-08x86/mce: Allow for copy_mc_fragile symbol checksum to be generatedBorislav Petkov
Add asm/mce.h to asm/asm-prototypes.h so that that asm symbol's checksum can be generated in order to support CONFIG_MODVERSIONS with it and fix: WARNING: modpost: EXPORT symbol "copy_mc_fragile" [vmlinux] version \ generation failed, symbol will not be versioned. For reference see: 4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm") 334bb7738764 ("x86/kbuild: enable modversions for symbols exported from asm") Fixes: ec6347bb4339 ("x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()") Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201007111447.GA23257@zn.tnic
2020-10-08mac80211: handle lack of sband->bitrates in ratesThomas Pedersen
Even though a driver or mac80211 shouldn't produce a legacy bitrate if sband->bitrates doesn't exist, don't crash if that is the case either. This fixes a kernel panic if station dump is run before last_rate can be updated with a data frame when sband->bitrates is missing (eg. in S1G bands). Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20201005164522.18069-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-08MIPS: SGI-IP28: disable use of ll/sc in kernelThomas Bogendoerfer
SGI-IP28 systems only use broken R10k rev 2.5 CPUs, which could lock up, if ll/sc sequences are issued in certain order. Since those systems are all non-SMP, we can disable ll/sc usage in kernel. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-08MIPS: tx49xx: move tx4939_add_memory_regions into only userThomas Bogendoerfer
tx4939_add_memory_regions() is only used in txx9/rbtx4939/prom.c. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-10-08docs: w1: w1_therm: Fix broken xref, mistakes, clarify textIvan Zaentsev
sysfs attribute names are mixed with the same normal text terms. Use ReST to distinguish. Fix typos and mistakes. Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20201008054259.5461-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci_maxim: Add support for Sink FRSBadhri Jagan Sridharan
Upon receiving ALERT_EXTENDED.TCPC_SINK_FAST_ROLE_SWAP signal tcpm to start Sink fast role swap signal. Inform when TCPM is sourcing vbus. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-9-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci: Implement callbacks for FRSBadhri Jagan Sridharan
Implement tcpc.enable_frs to enable TCPC to receive Fast role swap signal. Additionally set the sink disconnect threshold to 4v to prevent disconnect during Fast Role swap. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-8-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)Badhri Jagan Sridharan
PD 3.0 spec defines a new mechanism for power role swap called Fast role swap. This change enables TCPM to support FRS when acting as sink. Once the explicit contract is negotiated, sink port is expected to query the source port for sink caps to determine whether the source is FRS capable. Bits 23 & 24 of fixed pdo of the sink caps from the source, when set, indicates the current needed by the source when fast role swap is in progress(Implicit contract phasae). 0 indicates that the source does not support Fast Role Swap. Upon receiving the FRS signal from the source, TCPC(TCPM_FRS_EVENT) informs TCPM to start the Fast role swap sequence. 1. TCPM sends FRS PD message: FR_SWAP_SEND 2. If response is not received within the expiry of SenderResponseTimer, Error recovery is triggered.: FR_SWAP_SEND_TIMEOUT 3. Upon receipt of the accept message, TCPM waits for PSSourceOffTimer for PS_READY message from the partner: FR_SWAP_SNK_SRC_NEW_SINK_READY. TCPC is expected to autonomously turn on vbus once the FRS signal is received and vbus voltage falls below vsafe5v within tSrcFrSwap. This is different from traditional power role swap where the vbus sourcing is turned on by TCPM. 4. By this time, TCPC most likely would have started to source vbus, TCPM waits for tSrcFrSwap to see if the lower level TCPC driver signals TCPM_SOURCING_VBUS event: FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED. 5. When TCPC signals sourcing vbus, TCPM sends PS_READY msg and changes the CC pin from Rd to Rp. This is the end of fast role swap sequence and TCPM initiates the sequnce to negotiate explicit contract by transitioning into SRC_STARTUP after SwapSrcStart. The code is written based on the sequence described in "Figure 8-107: Dual-role Port in Sink to Source Fast Role Swap State Diagram" of USB Power Delivery Specification Revision 3.0, Version 1.2. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-7-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci_maxim: Chip level TCPC driverBadhri Jagan Sridharan
Chip level TCPC driver for Maxim's TCPCI implementation. This TCPC implementation does not support the following commands: COMMAND.SinkVbus, COMMAND.SourceVbusDefaultVoltage, COMMAND.SourceVbusHighVoltage. Instead the sinking and sourcing from vbus is supported by writes to custom registers. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-5-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci: Add set_vbus tcpci callbackBadhri Jagan Sridharan
set_vbus callback allows TCPC which are TCPCI based, however, does not support turning on sink and source mode through Command.SinkVbus and Command.SourceVbusDefaultVoltage. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-3-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci: Add a getter method to retrieve tcpm_port referenceBadhri Jagan Sridharan
Allow chip level drivers to retrieve reference to tcpm_port. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08misc: Kconfig: fix a HISI_HIKEY_USB dependencyMauro Carvalho Chehab
The dependency should be just USB_ROLE_SWITCH, instead of CONFIG_USB_ROLE_SWITCH. Fixes: 2827d98bc5d6 ("misc: Kconfig: add a new dependency for HISI_HIKEY_USB") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/0b6dff854c4bb412c2c11f17803e84d61385415f.1602138248.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08media: dt-bindings: media: venus: Add an optional power domain for perf votingRajendra Nayak
Venus needs to vote for the performance state of a power domain (cx) to be able to support DVFS. This 'cx' power domain is controlled by rpmh and is a common power domain (scalable) not specific to venus alone. This is optional in the sense that, leaving this power domain out does not really impact the functionality but just makes the platform a little less power efficient. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-08media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formatsLad Prabhakar
pixelformat in vin priv structure holds V4L2_PIX_FMT_* and not MEDIA_BUS_FMT_* so make sure we check against V4L2_PIX_FMT_* formats while setting the VNIS_REG. Fixes: 8c3e0f67df6c9 ("media: rcar-vin: Extend RAW8 support to all RGB layouts") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-08media: staging: rkisp1: uapi: Do not use BIT() macroNiklas Söderlund
The BIT() macro is not available to uAPI headers, replace the few usages of it by open coding it. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-08media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_doneEzequiel Garcia
A seemingly bad rebase introduced a spurious v4l2_m2m_buf_done, which releases a buffer twice and therefore triggers a noisy warning on each job: WARNING: CPU: 0 PID: 0 at drivers/media/common/videobuf2/videobuf2-core.c:986 vb2_buffer_done+0x208/0x2a0 Fix it by removing the spurious v4l2_m2m_buf_done. Reported-by: Adrian Ratiu <adrian.ratiu@collabora.com> Fixes: 911ea8ec42dea ("media: v4l2-mem2mem: add v4l2_m2m_suspend, v4l2_m2m_resume") Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Adrian Ratiu <adrian.ratiu@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-08media: usbtv: Fix refcounting mixupOliver Neukum
The premature free in the error path is blocked by V4L refcounting, not USB refcounting. Thanks to Ben Hutchings for review. [v2] corrected attributions Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 50e704453553 ("media: usbtv: prevent double free in error case") CC: stable@vger.kernel.org Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-08X.509: Fix modular build of public_key_sm2Herbert Xu
The sm2 code was split out of public_key.c in a way that breaks modular builds. This patch moves the code back into the same file as the original motivation was to minimise ifdefs and that has nothing to do with splitting the code out. Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3...") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-08crypto: xor - Remove unused variable count in do_xor_speedNathan Chancellor
Clang warns: crypto/xor.c:101:4: warning: variable 'count' is uninitialized when used here [-Wuninitialized] count++; ^~~~~ crypto/xor.c:86:17: note: initialize the variable 'count' to silence this warning int i, j, count; ^ = 0 1 warning generated. After the refactoring to use ktime that happened in this function, count is only assigned, never read. Just remove the variable to get rid of the warning. Fixes: c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking") Link: https://github.com/ClangBuiltLinux/linux/issues/1171 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-08X.509: fix error return value on the failed pathTianjia Zhang
When memory allocation fails, an appropriate return value should be set. Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification") Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-08crypto: bcm - Verify GCM/CCM key length in setkeyHerbert Xu
The setkey function for GCM/CCM algorithms didn't verify the key length before copying the key and subtracting the salt length. This patch delays the copying of the key til after the verification has been done. It also adds checks on the key length to ensure that it's at least as long as the salt. Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver") Cc: <stable@vger.kernel.org> Reported-by: kiyin(尹亮) <kiyin@tencent.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-08crypto: qat - drop input parameter from adf_enable_aer()Giovanni Cabiddu
Remove pointer to struct pci_driver from function adf_enable_aer() as it is possible to get it directly from pdev->driver. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-08crypto: qat - fix function parameters descriptionsGiovanni Cabiddu
Fix description of function parameters. This is to fix the following warnings when compiling the driver with W=1: drivers/crypto/qat/qat_common/adf_sriov.c:133: warning: Function parameter or member 'numvfs' not described in 'adf_sriov_configure' drivers/crypto/qat/qat_common/adf_dev_mgr.c:296: warning: Function parameter or member 'pci_dev' not described in 'adf_devmgr_pci_to_accel_dev' drivers/crypto/qat/qat_common/adf_dev_mgr.c:296: warning: Excess function parameter 'accel_dev' description in 'adf_devmgr_pci_to_accel_dev' Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-07Merge branch 'libbpf: auto-resize relocatable LOAD/STORE instructions'Alexei Starovoitov
Andrii Nakryiko says: ==================== Patch set implements logic in libbpf to auto-adjust memory size (1-, 2-, 4-, 8-bytes) of load/store (LD/ST/STX) instructions which have BPF CO-RE field offset relocation associated with it. In practice this means transparent handling of 32-bit kernels, both pointer and unsigned integers. Signed integers are not relocatable with zero-extending loads/stores, so libbpf poisons them and generates a warning. If/when BPF gets support for sign-extending loads/stores, it would be possible to automatically relocate them as well. All the details are contained in patch #2 comments and commit message. Patch #3 is a simple change in libbpf to make advanced testing with custom BTF easier. Patch #4 validates correct uses of auto-resizable loads, as well as check that libbpf fails invalid uses. Patch #1 skips CO-RE relocation for programs that had bpf_program__set_autoload(prog, false) set on them, reducing warnings and noise. v2->v3: - fix copyright (Alexei); v1->v2: - more consistent names for instruction mem size convertion routines (Alexei); - extended selftests to use relocatable STX instructions (Alexei); - added a fix for skipping CO-RE relocation for non-loadable programs. Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Tony Ambardar <tony.ambardar@gmail.com> ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-22 21:40:19 +0000