summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-28Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: restore only the mode of this driver on lastclose (v2) drm/radeon/kms: add info query for tile pipes drm/radeon/kms: add missing safe regs for 6xx/7xx drm: select FRAMEBUFFER_CONSOLE_PRIMARY if we have FRAMEBUFFER_CONSOLE
2011-04-28Merge branch 'for-2.6.39' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mm: Set all online nodes in N_NORMAL_MEMORY
2011-04-28Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: nfs: don't lose MS_SYNCHRONOUS on remount of noac mount NFS: Return meaningful status from decode_secinfo() NFSv4: Ensure we request the ordinary fileid when doing readdirplus NFSv4: Ensure that clientid and session establishment can time out SUNRPC: Allow RPC calls to return ETIMEDOUT instead of EIO NFSv4.1: Don't loop forever in nfs4_proc_create_session NFSv4: Handle NFS4ERR_WRONGSEC outside of nfs4_handle_exception() NFSv4.1: Don't update sequence number if rpc_task is not sent NFSv4.1: Ensure state manager thread dies on last umount SUNRPC: Fix the SUNRPC Kerberos V RPCSEC_GSS module dependencies NFS: Use correct variable for page bounds checking NFS: don't negotiate when user specifies sec flavor NFS: Attempt mount with default sec flavor first NFS: flav_array honors NFS_MAX_SECFLAVORS NFS: Fix infinite loop in gss_create_upcall() Don't mark_inode_dirty_sync() while holding lock NFS: Get rid of pointless test in nfs_commit_done NFS: Remove unused argument from nfs_find_best_sec() NFS: Eliminate duplicate call to nfs_mark_request_dirty NFS: Remove dead code from nfs_fs_mount()
2011-04-28flex_arrays: allow zero length flex arraysEric Paris
Just like kmalloc will allow one to allocate a 0 length segment of memory flex arrays should do the same thing. It should bomb if you try to use something, but it should at least allow the allocation. This is needed because when SELinux switched to using flex_arrays in 2.6.38 the inability to allocate a 0 length array resulted in SELinux policy load returning -ENOSPC when previously it worked. Based-on-patch-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Eric Paris <eparis@redhat.com> Tested-by: Chris Richards <gizmo@giz-works.com> Cc: stable@kernel.org [2.6.38+]
2011-04-28flex_array: flex_array_prealloc takes a number of elements, not an endEric Paris
Change flex_array_prealloc to take the number of elements for which space should be allocated instead of the last (inclusive) element. Users and documentation are updated accordingly. flex_arrays got introduced before they had users. When folks started using it, they ended up needing a different API than was coded up originally. This swaps over to the API that folks apparently need. Based-on-patch-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Eric Paris <eparis@redhat.com> Tested-by: Chris Richards <gizmo@giz-works.com> Acked-by: Dave Hansen <dave@linux.vnet.ibm.com> Cc: stable@kernel.org [2.6.38+]
2011-04-28SELinux: pass last path component in may_createEric Paris
New inodes are created in a two stage process. We first will compute the label on a new inode in security_inode_create() and check if the operation is allowed. We will then actually re-compute that same label and apply it in security_inode_init_security(). The change to do new label calculations based in part on the last component of the path name only passed the path component information all the way down the security_inode_init_security hook. Down the security_inode_create hook the path information did not make it past may_create. Thus the two calculations came up differently and the permissions check might not actually be against the label that is created. Pass and use the same information in both places to harmonize the calculations and checks. Reported-by: Dominick Grift <domg472@gmail.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-28usbnet: Resubmit interrupt URB if device is openPaul Stewart
Resubmit interrupt URB if device is open. Use a flag set in usbnet_open() to determine this state. Also kill and free interrupt URB in usbnet_disconnect(). [Rebased off git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git] Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28iwl4965: fix "TX Power requested while scanning"Stanislaw Gruszka
Fix the following: WARNING: at drivers/net/wireless/iwlegacy/iwl-4965.c:1128 \ iwl4965_send_tx_power+0x61/0x102 [iwl4965]() Hardware name: [...] TX Power requested while scanning! Pid: 5723, comm: kworker/u:28 Not tainted 2.6.39-0.rc4.4.fc14.x86_64 #1 Call Trace: [<ffffffff8104e27b>] warn_slowpath_common+0x85/0x9d [<ffffffffa02782e0>] ? iwl4965_show_temperature+0x49/0x49 [iwl4965] [<ffffffff8104e336>] warn_slowpath_fmt+0x46/0x48 [<ffffffffa027712f>] iwl4965_send_tx_power+0x61/0x102 [iwl4965] [<ffffffff81477e05>] ? mutex_lock+0x36/0x50 [<ffffffffa0278337>] iwl4965_bg_txpower_work+0x57/0x73 [iwl4965] [<ffffffff810647f3>] process_one_work+0x18d/0x286 [<ffffffff81065a5e>] worker_thread+0xfd/0x181 [<ffffffff81065961>] ? manage_workers.clone.16+0x172/0x172 [<ffffffff81069036>] kthread+0x82/0x8a [<ffffffff81480524>] kernel_thread_helper+0x4/0x10 [<ffffffff81068fb4>] ? kthread_worker_fn+0x14b/0x14b [<ffffffff81480520>] ? gs_change+0x13/0x13 Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28iwlegacy: led stay solid on when no trafficWey-Yi Guy
commit 5ed540aecc2aae92d5c97b9a9306a5bf88ad5574 change the led behavior for iwlwifi driver; the side effect cause led blink all the time. Modify the led blink table to fix this problem Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28b43: trivial: update module info about ucode16_mimo firmwareRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28mm: check if PTE is already allocated during page faultMel Gorman
With transparent hugepage support, handle_mm_fault() has to be careful that a normal PMD has been established before handling a PTE fault. To achieve this, it used __pte_alloc() directly instead of pte_alloc_map as pte_alloc_map is unsafe to run against a huge PMD. pte_offset_map() is called once it is known the PMD is safe. pte_alloc_map() is smart enough to check if a PTE is already present before calling __pte_alloc but this check was lost. As a consequence, PTEs may be allocated unnecessarily and the page table lock taken. Thi useless PTE does get cleaned up but it's a performance hit which is visible in page_test from aim9. This patch simply re-adds the check normally done by pte_alloc_map to check if the PTE needs to be allocated before taking the page table lock. The effect is noticable in page_test from aim9. AIM9 2.6.38-vanilla 2.6.38-checkptenone creat-clo 446.10 ( 0.00%) 424.47 (-5.10%) page_test 38.10 ( 0.00%) 42.04 ( 9.37%) brk_test 52.45 ( 0.00%) 51.57 (-1.71%) exec_test 382.00 ( 0.00%) 456.90 (16.39%) fork_test 60.11 ( 0.00%) 67.79 (11.34%) MMTests Statistics: duration Total Elapsed Time (seconds) 611.90 612.22 (While this affects 2.6.38, it is a performance rather than a functional bug and normally outside the rules -stable. While the big performance differences are to a microbench, the difference in fork and exec performance may be significant enough that -stable wants to consider the patch) Reported-by: Raz Ben Yehuda <raziebe@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@kernel.org> [2.6.38.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28kernel/watchdog.c: disable nmi perf event in the error path of enabling watchdogHillf Danton
In corner cases where softlockup watchdog is not setup successfully, the relevant nmi perf event for hardlockup watchdog could be disabled, then the status of the underlying hardware remains unchanged. Also, if the kthread doesn't start then the hrtimer won't run and the hardlockup detector will falsely fire. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28um: adjust current_thread_info() for newer gcc versionsRichard Weinberger
In some cases gcc >= 4.5.2 will optimize away current_thread_info(). To prevent gcc from doing so the stack address has to be obtained via inline asm. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28uml: fix hppfs buildRandy Dunlap
Make HoneyPot ProcFS depend on CONFIG_PROC_FS so that it will build. Recommended by Christoph Hellwig. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=33692 Reported-by: Simon Danner <danner.simon@gmail.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28um: mdd support for 64 bit atomic operationsRichard Weinberger
This adds support for 64 bit atomic operations on 32 bit UML systems. XFS needs them since 2.6.38. $ make ARCH=um SUBARCH=i386 ... LD .tmp_vmlinux1 fs/built-in.o: In function `xlog_regrant_reserve_log_space': xfs_log.c:(.text+0xd8584): undefined reference to `atomic64_read_386' xfs_log.c:(.text+0xd85ac): undefined reference to `cmpxchg8b_emu' ... Addresses https://bugzilla.kernel.org/show_bug.cgi?id=32812 Reported-by: Martin Walch <walch.martin@web.de> Tested-by: Martin Walch <walch.martin@web.de> Cc: Martin Walch <walch.martin@web.de> Cc: <stable@kernel.org> [2.6.38.x 084189a: um: disable CONFIG_CMPXCHG_LOCAL] Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28oom: use pte pages in OOM scoreKOSAKI Motohiro
PTE pages eat up memory just like anything else, but we do not account for them in any way in the OOM scores. They are also _guaranteed_ to get freed up when a process is OOM killed, while RSS is not. Reported-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@kernel.org> [2.6.36+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28MAINTAINERS: add EXYNOS ARM architecturesKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28memcg: update documentation to describe usage_in_bytesDaisuke Nishimura
Since 569b846d ("memcg: coalesce uncharge during unmap/truncate"), we do batched (delayed) uncharge at truncation/unmap. And since cdec2e42(memcg: coalesce charging via percpu storage), we have percpu cache for res_counter. These changes improved performance of memory cgroup very much, but made res_counter->usage usually have a bigger value than the actual value of memory usage. So, *.usage_in_bytes, which show res_counter->usage, are not desirable for precise values of memory(and swap) usage anymore. Instead of removing these files completely(because we cannot know res_counter->usage without them), this patch updates the meaning of those files. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28MAINTAINERS: update Documentation file entry of GPIO subsystemKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28MAINTAINERS: re-alphabetize Xen entriesIan Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28mm: thp: fix /dev/zero MAP_PRIVATE and vm_flags cleanupsAndrea Arcangeli
The huge_memory.c THP page fault was allowed to run if vm_ops was null (which would succeed for /dev/zero MAP_PRIVATE, as the f_op->mmap wouldn't setup a special vma->vm_ops and it would fallback to regular anonymous memory) but other THP logics weren't fully activated for vmas with vm_file not NULL (/dev/zero has a not NULL vma->vm_file). So this removes the vm_file checks so that /dev/zero also can safely use THP (the other albeit safer approach to fix this bug would have been to prevent the THP initial page fault to run if vm_file was set). After removing the vm_file checks, this also makes huge_memory.c stricter in khugepaged for the DEBUG_VM=y case. It doesn't replace the vm_file check with a is_pfn_mapping check (but it keeps checking for VM_PFNMAP under VM_BUG_ON) because for a is_cow_mapping() mapping VM_PFNMAP should only be allowed to exist before the first page fault, and in turn when vma->anon_vma is null (so preventing khugepaged registration). So I tend to think the previous comment saying if vm_file was set, VM_PFNMAP might have been set and we could still be registered in khugepaged (despite anon_vma was not NULL to be registered in khugepaged) was too paranoid. The is_linear_pfn_mapping check is also I think superfluous (as described by comment) but under DEBUG_VM it is safe to stay. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=33682 Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Caspar Zhang <bugs@casparzhang.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [2.6.38.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28vfs: avoid large kmalloc()s for the fdtableAndrew Morton
Azurit reports large increases in system time after 2.6.36 when running Apache. It was bisected down to a892e2d7dcdfa6c76e6 ("vfs: use kmalloc() to allocate fdmem if possible"). That patch caused the vfs to use kmalloc() for very large allocations and this is causing excessive work (and presumably excessive reclaim) within the page allocator. Fix it by falling back to vmalloc() earlier - when the allocation attempt would have been considered "costly" by reclaim. Reported-by: azurIt <azurit@pobox.sk> Tested-by: azurIt <azurit@pobox.sk> Acked-by: Changli Gao <xiaosuo@gmail.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Cc: Jiri Slaby <jslaby@suse.cz> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28ALSA: usb-audio - Terratec Aureon 7.1 USB ID as C-Media cm6206 quirksWolfgang Breyha
This patch adds support for the Terratec Aureon 7.1 USB which uses a C-Media cm6206 and needs all the quirks already found in the past. Signed-off-by: Wolfgang Breyha <wbreyha@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-04-28ASoC: Fix CODEC DAI names for GoniMark Brown
Immediately after sending the last fix I realised that the CODEC DAI names also don't correspond to the WM8994 driver. Update the DAI names to match. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-28ASoC: Fix CODEC name in GoniMark Brown
This was typoed at some point in the multi-component merge, though the driver was added along with that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-28ARM: Fix .size directive for xscale_dma_a0_map_areaBen Hutchings
gas used to accept (and ignore?) .size directives which referred to undefined symbols, as this does. In binutils 2.21 these are treated as fatal errors. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-28x86: ce4100: Configure IOAPIC pins for USB and SATA to level typeSebastian Andrzej Siewior
The USB and SATA ioapic interrrupt pins are configured as edge type, but need to be level type interrupts to work correctly. [ tglx: Split out from the combo patch ] Cc: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/%3C20110427143052.GA15211%40linutronix.de%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-28x86: devicetree: Configure IOAPIC pin only onceSebastian Andrzej Siewior
We use io_apic_setup_irq_pin() in order to configure pin's interrupt number polarity and type. This is done on every irq_create_of_mapping() which happens for instance during pci enable calls. Level typed interrupts are masked by default, edge are unmasked. On the first ->xlate() call the level interrupt is configured and masked. The driver calls request_irq() and the line is unmasked. Lets assume the interrupt line is shared with another device and we call pci_enable_device() for this device. The ->xlate() configures the pin again and it is masked. request_irq() does not unmask the line because it _is_ already unmasked according to its internal state. So the interrupt will never be unmasked again. This patch is based on an earlier work by Torben Hohn and solves the problem by configuring the pin only once. Since all devices must agree on the same type and polarity there is no point in configuring the pin more than once. [ tglx: Split out the ce4100 part into a separate patch ] Cc: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/%3C20110427143052.GA15211%40linutronix.de%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-28ALSA: hda - VIA: Fix notify_aa_path_ctls() invalid issue.Lydia Wang
In notify_aa_path_ctls(), adds 'rear mic' item and confirms the A-A path control existing before notifying card that the A-A path volume is muted if smart5.1 is enabled. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-28rtc: max8925: Call dev_set_drvdata before rtc_device_registerZhangfei Gao
We call rtc_read_alarm from rtc_device_register, so it is important that the rtc device is fully initialized prior to registration. rtc-max8925 sets drvdata after register, so the rtc_read_alarm code dereferences a NULL pointer. Call dev_set_drvdata before rtc_device_register. [ jstultz/tglx: Massaged commit message ] Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Link: http://lkml.kernel.org/r/%3C1303929869-25249-1-git-send-email-john.stultz%40linaro.org%3E Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-28watchdog, hung_task_timeout: Add Kconfig configurable defaultJeff Mahoney
This patch allows the default value for sysctl_hung_task_timeout_secs to be set at build time. The feature carries virtually no overhead, so it makes sense to keep it enabled. On heavily loaded systems, though, it can end up triggering stack traces when there is no bug other than the system being underprovisioned. We use this patch to keep the hung task facility available but disabled at boot-time. The default of 120 seconds is preserved. As a note, commit e162b39a may have accidentally reverted commit fb822db4, which raised the default from 120 seconds to 480 seconds. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Mandeep Singh Baines <msb@google.com> Link: http://lkml.kernel.org/r/4DB8600C.8080000@suse.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-28perf stat: Fix compatibility behaviorIngo Molnar
Instead of failing on an unknown event, when new perf stat is run on older kernels: $ ./perf stat true Error: open_counter returned with 22 (Invalid argument). /bin/dmesg may provide additional information. Fatal: Not all events could be opened. Just ignore EINVAL and ENOSYS, we'll print the results as not counted: Performance counter stats for 'true': 0.239483 task-clock # 0.493 CPUs utilized 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 86 page-faults # 0.359 M/sec 704,766 cycles # 2.943 GHz <not counted> stalled-cycles 381,961 instructions # 0.54 insns per cycle 69,626 branches # 290.735 M/sec 4,594 branch-misses # 6.60% of all branches 0.000485883 seconds time elapsed Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/n/tip-7y40wib8n1eqio5hjpn3dsrm@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-28perf stat: Add --sync/-S optionIngo Molnar
--sync will tell perf stat to run sync() before starting a command. This allows IO-heavy tests to be used with --repeat, without one iteration impacting the other. Elapsed time will stabilize for example: before: 3.971525714 seconds time elapsed ( +- 8.56% ) after: 3.211098537 seconds time elapsed ( +- 1.52% ) So measurements will be more accurate. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/n/tip-7y40wib8n1eqio7hjpn1dsrm@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-28perf event, x86: Use better stalled cycles metricIngo Molnar
Use the UOPS_EXECUTED.*,c=1,i=1 event on Intel CPUs - it is a rather good indicator of CPU execution stalls, more sensitive and more inclusive than the 0xa2 resource stalls event (which does not count nearly as many stall types). Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/n/tip-7y40wib8n1eqio7hjpn2dsrm@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-27Input: wm831x-ts - move BTN_TOUCH reporting to data transferMark Brown
Don't report BTN_TOUCH until we've got data as some less robust applications can be confused by getting a touch event by itself and it doesn't seem unreasonable for them to expect coordinates along with a touch. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: wm831x-ts - allow IRQ flags to be specifiedMark Brown
This allows maximum flexibility for configuring the direct GPIO based interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: wm831x-ts - fix races with IRQ managementMark Brown
If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27mmc: sdhci: Check mrq != NULL in sdhci_tasklet_finishChris Ball
It seems that under certain circumstances the sdhci_tasklet_finish() call can be entered with mrq set to NULL, causing the system to crash with a NULL pointer de-reference. Seen on S3C6410 system. Based on a patch by Dimitris Papastamos. Reported-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: sdhci: Check mrq->cmd in sdhci_tasklet_finishBen Dooks
It seems that under certain circumstances that the sdhci_tasklet_finish() call can be entered with mrq->cmd set to NULL, causing the system to crash with a NULL pointer de-reference. Unable to handle kernel NULL pointer dereference at virtual address 00000000 PC is at sdhci_tasklet_finish+0x34/0xe8 LR is at sdhci_tasklet_finish+0x24/0xe8 Seen on S3C6410 system. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: tmio: fix .set_ios(MMC_POWER_UP) handlingGuennadi Liakhovetski
The aggressive clock gating for TMIO MMC patch has broken switching interface power on, using MFD or platform callbacks. Restore the ios->power_mode == MMC_POWER_UP && ios->clock == 0 case handling. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: fix a race between card-detect rescan and clock-gate work instancesGuennadi Liakhovetski
Currently there is a race in the MMC core between a card-detect rescan work and the clock-gating work, scheduled from a command completion. Fix it by removing the dedicated clock-gating mutex and using the MMC standard locking mechanism instead. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <damm@opensource.se> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: omap: Fix possible NULL pointer derefMichael Buesch
Either OMAP_MMC_STAT_CARD_ERR or OMAP_MMC_STAT_END_OF_CMD might fire if there is no host->cmd pointer. Check for a valid host->cmd pointer before calling mmc_omap_cmd_done(). Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: core: mmc_add_card(): fix missing break in switch statementMichał Mirosław
Fixes a cosmetic bug that affects printk() for SD-combo cards. Reported-by: Prashanth Bhat <prashanth.bhat@manipal.net> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-27mmc: sdhci-pci: Fix error case in sdhci_pci_probe_slot()Chris Ball
If pci_ioremap_bar() fails during probe, we "goto release;" and free the host, but then we return 0 -- which tells sdhci_pci_probe() that the probe succeeded. Since we think the probe succeeded, when we unload sdhci we'll go to sdhci_pci_remove_slot() and it will try to dereference slot->host, which is now NULL because we freed it in the error path earlier. The patch simply sets ret appropriately, so that sdhci_pci_probe() will detect the failure immediately and bail out. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: <stable@kernel.org>
2011-04-27Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] slub: fix panic with DISCONTIGMEM [PARISC] set memory ranges in N_NORMAL_MEMORY when onlined
2011-04-27Merge branch 'pm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: ACPI / PM: Avoid infinite recurrence while registering power resources PM / Wakeup: Fix initialization of wakeup-related device sysfs files
2011-04-27Merge branch 'spell-fix' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'spell-fix' of git://git.profusion.mobi/users/lucas/linux-2.6: Revert wrong fixes for common misspellings
2011-04-27Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (42 commits) [media] media: vb2: correct queue initialization order [media] media: vb2: fix incorrect v4l2_buffer->flags handling [media] s5p-fimc: Add support for the buffer timestamps and sequence [media] s5p-fimc: Fix bytesperline and plane payload setup [media] s5p-fimc: Do not allow changing format after REQBUFS [media] s5p-fimc: Fix FIMC3 pixel limits on Exynos4 [media] tda18271: update tda18271c2_rf_cal as per NXP's rev.04 datasheet [media] tda18271: update tda18271_rf_band as per NXP's rev.04 datasheet [media] tda18271: fix bad calculation of main post divider byte [media] tda18271: prog_cal and prog_tab variables should be s32, not u8 [media] tda18271: fix calculation bug in tda18271_rf_tracking_filters_init [media] omap3isp: queue: Don't corrupt buf->npages when get_user_pages() fails [media] v4l: Don't register media entities for subdev device nodes [media] omap3isp: Don't increment node entity use count when poweron fails [media] omap3isp: lane shifter support [media] omap3isp: ccdc: support Y10/12, 8-bit bayer fmts [media] media: add missing 8-bit bayer formats and Y12 [media] v4l: add V4L2_PIX_FMT_Y12 format cx23885: Fix stv0367 Kconfig dependency [media] omap3isp: Use isp xclk defines ... Fix up trivial conflict (spelink errurs) in drivers/media/video/omap3isp/isp.c
2011-04-27x86, setup: Fix EDD3.0 data verification.Gleb Natapov
Check for nonzero path in edd_has_edd30() has no sense. First, it looks at the wrong memory. Device path starts at offset 30 of the info->params structure which is at offset 8 from the beginning of info structure, but code looks at info + 4 instead. This was correct when code was introduced, but around v2.6.4 three more fields were added to edd_info structure (commit 66b61a5c in history.git). Second, even if it will check correct memory it will always succeed since at offset 30 (params->key) there will be non-zero values otherwise previous check would fail. The patch replaces this bogus check with one that verifies checksum. Signed-off-by: Gleb Natapov <gleb@redhat.com> Link: http://lkml.kernel.org/r/20110426082132.GG2265@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-22 21:20:52 +0000