summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-20be2net: restrict MODIFY_EQ_DELAY cmd to a max of 8 EQsSuresh Reddy
Issuing this cmd for more than 8 EQs does not have the intended effect even on BEx and Skyhawk-R. This patch fixes this by issuing this cmd for upto 8 EQs at a time. Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20be2net: Prevent VFs from enabling VLAN promiscuous modeVasundhara Volam
Currently, a PF does not restrict its VF interface from enabling vlan promiscuous mode. This breaks vlan isolation when a vlan (transparent tagging) is configured on a VF. This patch fixes this problem by disabling the vlan promisc capability for VFs. Reported-by: Yoann Juet <veilletechno-irts@univ-nantes.fr> Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20tcp: fix tcp fin memory accountingJosh Hunt
tcp_send_fin() does not account for the memory it allocates properly, so sk_forward_alloc can be negative in cases where we've sent a FIN: ss example output (ss -amn | grep -B1 f4294): tcp FIN-WAIT-1 0 1 192.168.0.1:45520 192.0.2.1:8080 skmem:(r0,rb87380,t0,tb87380,f4294966016,w1280,o0,bl0) Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20arm64: efi: don't restore TTBR0 if active_mm points at init_mmWill Deacon
init_mm isn't a normal mm: it has swapper_pg_dir as its pgd (which contains kernel mappings) and is used as the active_mm for the idle thread. When restoring the pgd after an EFI call, we write current->active_mm into TTBR0. If the current task is actually the idle thread (e.g. when initialising the EFI RTC before entering userspace), then the TLB can erroneously populate itself with junk global entries as a result of speculative table walks. When we do eventually return to userspace, the task can end up hitting these junk mappings leading to lockups, corruption or crashes. This patch fixes the problem in the same way as the CPU suspend code by ensuring that we never switch to the init_mm in efi_set_pgd and instead point TTBR0 at the zero page. A check is also added to cpu_switch_mm to BUG if we get passed swapper_pg_dir. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: f3cdfd239da5 ("arm64/efi: move SetVirtualAddressMap() to UEFI stub") Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-03-20ipv6: fix backtracking for throw routesSteven Barth
for throw routes to trigger evaluation of other policy rules EAGAIN needs to be propagated up to fib_rules_lookup similar to how its done for IPv4 A simple testcase for verification is: ip -6 rule add lookup 33333 priority 33333 ip -6 route add throw 2001:db8::1 ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333 ip route get 2001:db8::1 Signed-off-by: Steven Barth <cyrus@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}Markos Chandras
On a MIPS Malta board, tons of fifo underflow errors have been observed when using u-boot as bootloader instead of YAMON. The reason for that is that YAMON used to set the pcnet device to SRAM mode but u-boot does not. As a result, the default Tx threshold (64 bytes) is now too small to keep the fifo relatively used and it can result to Tx fifo underflow errors. As a result of which, it's best to setup the SRAM on supported controllers so we can always use the NOUFLO bit. Cc: <netdev@vger.kernel.org> Cc: <stable@vger.kernel.org> Cc: <linux-kernel@vger.kernel.org> Cc: Don Fry <pcnet32@frontier.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in ↵Sabrina Dubroca
udp6_ufo_fragment Matt Grant reported frequent crashes in ipv6_select_ident when udp6_ufo_fragment is called from openvswitch on a skb that doesn't have a dst_entry set. ipv6_proxy_select_ident generates the frag_id without using the dst associated with the skb. This approach was suggested by Vladislav Yasevich. Fixes: 0508c07f5e0c ("ipv6: Select fragment id during UFO segmentation if not set.") Cc: Vladislav Yasevich <vyasevic@redhat.com> Reported-by: Matt Grant <matt@mattgrant.net.nz> Tested-by: Matt Grant <matt@mattgrant.net.nz> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20xen-netback: making the bandwidth limiter runtime settablePalik, Imre
With the current netback, the bandwidth limiter's parameters are only settable during vif setup time. This patch register a watch on them, and thus makes them runtime changeable. When the watch fires, the timer is reset. The timer's mutex is used for fencing the change. Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by: Imre Palik <imrep@amazon.de> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20NFSD: Error out when register_shrinker() failKinglong Mee
If register_shrinker() failed, nfsd will cause a NULL pointer access as, [ 9250.875465] nfsd: last server has exited, flushing export cache [ 9251.427270] BUG: unable to handle kernel NULL pointer dereference at (null) [ 9251.427393] IP: [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.427579] PGD 13e4d067 PUD 13e4c067 PMD 0 [ 9251.427633] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 9251.427706] Modules linked in: ip6t_rpfilter ip6t_REJECT bnep bluetooth xt_conntrack cfg80211 rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw btrfs xfs microcode ppdev serio_raw pcspkr xor libcrc32c raid6_pq e1000 parport_pc parport i2c_piix4 i2c_core nfsd(OE-) auth_rpcgss nfs_acl lockd sunrpc(E) ata_generic pata_acpi [ 9251.428240] CPU: 0 PID: 1557 Comm: rmmod Tainted: G OE 3.16.0-rc2+ #22 [ 9251.428366] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 [ 9251.428496] task: ffff880000849540 ti: ffff8800136f4000 task.ti: ffff8800136f4000 [ 9251.428593] RIP: 0010:[<ffffffff8136fc29>] [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.428696] RSP: 0018:ffff8800136f7ea0 EFLAGS: 00010207 [ 9251.428751] RAX: 0000000000000000 RBX: ffffffffa0116d48 RCX: dead000000200200 [ 9251.428814] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa0116d48 [ 9251.428876] RBP: ffff8800136f7ea0 R08: ffff8800136f4000 R09: 0000000000000001 [ 9251.428939] R10: 8080808080808080 R11: 0000000000000000 R12: ffffffffa011a5a0 [ 9251.429002] R13: 0000000000000800 R14: 0000000000000000 R15: 00000000018ac090 [ 9251.429064] FS: 00007fb9acef0740(0000) GS:ffff88003fa00000(0000) knlGS:0000000000000000 [ 9251.429164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9251.429221] CR2: 0000000000000000 CR3: 0000000031a17000 CR4: 00000000001407f0 [ 9251.429306] Stack: [ 9251.429410] ffff8800136f7eb8 ffffffff8136fcdd ffffffffa0116d20 ffff8800136f7ed0 [ 9251.429511] ffffffff8118a0f2 0000000000000000 ffff8800136f7ee0 ffffffffa00eb765 [ 9251.429610] ffff8800136f7ef0 ffffffffa010e93c ffff8800136f7f78 ffffffff81104ac2 [ 9251.429709] Call Trace: [ 9251.429755] [<ffffffff8136fcdd>] list_del+0xd/0x30 [ 9251.429896] [<ffffffff8118a0f2>] unregister_shrinker+0x22/0x40 [ 9251.430037] [<ffffffffa00eb765>] nfsd_reply_cache_shutdown+0x15/0x90 [nfsd] [ 9251.430106] [<ffffffffa010e93c>] exit_nfsd+0x9/0x6cd [nfsd] [ 9251.430192] [<ffffffff81104ac2>] SyS_delete_module+0x162/0x200 [ 9251.430280] [<ffffffff81013b69>] ? do_notify_resume+0x59/0x90 [ 9251.430395] [<ffffffff816f2369>] system_call_fastpath+0x16/0x1b [ 9251.430457] Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08 [ 9251.430691] RIP [<ffffffff8136fc29>] __list_del_entry+0x29/0xd0 [ 9251.430755] RSP <ffff8800136f7ea0> [ 9251.430805] CR2: 0000000000000000 [ 9251.431033] ---[ end trace 080f3050d082b4ea ]--- Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-20NFSD: Take care the return value from nfsd4_decode_stateidKinglong Mee
Return status after nfsd4_decode_stateid failed. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-20NFSD: Check layout type when returning client layoutsKinglong Mee
According to RFC5661: " When lr_returntype is LAYOUTRETURN4_FSID, the current filehandle is used to identify the file system and all layouts matching the client ID, the fsid of the file system, lora_layout_type, and lora_iomode are returned. When lr_returntype is LAYOUTRETURN4_ALL, all layouts matching the client ID, lora_layout_type, and lora_iomode are returned and the current filehandle is not used. " When returning client layouts, always check layout type. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-20NFSD: restore trace event lost in mismergeKinglong Mee
31ef83dc05 "nfsd: add trace events" had a typo that dropped a trace event and replaced it by an incorrect recursive call to nfsd4_cb_layout_fail. 133d558216d9 "Subject: nfsd: don't recursively call nfsd4_cb_layout_fail" fixed the crash, this restores the tracepoint. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-20Merge branch 'listener_refactor_part_14'David S. Miller
Eric Dumazet says: ==================== inet: tcp listener refactoring part 14 OK, we have serious patches here. We get rid of the central timer handling SYNACK rtx, which is killing us under even medium SYN flood. We still use the listener specific hash table. This will be done in next round ;) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20net: increase sk_[max_]ack_backlogEric Dumazet
sk_ack_backlog & sk_max_ack_backlog were 16bit fields, meaning listen() backlog was limited to 65535. It is time to increase the width to allow much bigger backlog, if admins change /proc/sys/net/core/somaxconn & /proc/sys/net/ipv4/tcp_max_syn_backlog default values. Tested: echo 5000000 >/proc/sys/net/core/somaxconn echo 5000000 >/proc/sys/net/ipv4/tcp_max_syn_backlog Ran a SYNFLOOD test against a listener using listen(fd, 5000000) myhost~# grep request_sock_TCP /proc/slabinfo request_sock_TCP 4185642 4411940 304 13 1 : tunables 54 27 8 : slabdata 339380 339380 0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20inet: get rid of central tcp/dccp listener timerEric Dumazet
One of the major issue for TCP is the SYNACK rtx handling, done by inet_csk_reqsk_queue_prune(), fired by the keepalive timer of a TCP_LISTEN socket. This function runs for awful long times, with socket lock held, meaning that other cpus needing this lock have to spin for hundred of ms. SYNACK are sent in huge bursts, likely to cause severe drops anyway. This model was OK 15 years ago when memory was very tight. We now can afford to have a timer per request sock. Timer invocations no longer need to lock the listener, and can be run from all cpus in parallel. With following patch increasing somaxconn width to 32 bits, I tested a listener with more than 4 million active request sockets, and a steady SYNFLOOD of ~200,000 SYN per second. Host was sending ~830,000 SYNACK per second. This is ~100 times more what we could achieve before this patch. Later, we will get rid of the listener hash and use ehash instead. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20inet: drop prev pointer handling in request sockEric Dumazet
When request sock are put in ehash table, the whole notion of having a previous request to update dl_next is pointless. Also, following patch will get rid of big purge timer, so we want to delete a request sock without holding listener lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20mac80211: avoid duplicate TX path station lookupJohannes Berg
Instead of looking up the destination station twice in the TX path (first to build the header, and then for control processing), save it when building the header and use it later in the TX path. To avoid having to look up the station in the many callers, allow those to pass %NULL which keeps the existing lookup. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20mac80211: mesh: avoid pointless station lookupJohannes Berg
In ieee80211_build_hdr(), the station is looked up to build the header correctly (QoS field) and to check for authorization. For mesh, authorization isn't checked here, and QoS capability is mandatory, so the station lookup can be avoided. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20mac80211: drop 4-addr VLAN frames earlier if not connectedJohannes Berg
If there's no station on the 4-addr VLAN interface, then frames cannot be transmitted. Drop such frames earlier, before setting up all the information for them. We should keep the old check though since that code might be used for other internally-generated frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20mac80211: don't look up destination station twiceJohannes Berg
There's no need to look up the destination station twice while building the 802.11 header for a given frame if the frame will actually be transmitted to the station we initially looked up. This happens for 4-addr VLAN interfaces and TDLS connections, which both directly send the frame to the station they looked up, though in the case of TDLS some station conditions need to be checked. To avoid that, add a variable indicating that we've looked up the station that the frame is going to be transmitted to, and avoid the lookup/flag checking if it already has been done. In the TDLS case, also move the authorized/wme_sta flag assignment to the correct place, i.e. only when that station is really used. Before this change, the new lookup should always have succeeded so that the potentially erroneous data would be overwritten. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20Fix bug in blk_rq_merge_okWenbo Wang
Use the right array index to reference the last element of rq->biotail->bi_io_vec[] Signed-off-by: Wenbo Wang <wenbo.wang@memblaze.com> Reviewed-by: Chong Yuan <chong.yuan@memblaze.com> Fixes: 66cb45aa41315 ("block: add support for limiting gaps in SG lists") Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-03-20Revert "x86/PCI: Refine the way to release PCI IRQ resources"Rafael J. Wysocki
Commit b4b55cda5874 (Refine the way to release PCI IRQ resources) introduced a regression in the PCI IRQ resource management by causing the IRQ resource of a device, established when pci_enabled_device() is called on a fully disabled device, to be released when the driver is unbound from the device, regardless of the enable_cnt. This leads to the situation that an ill-behaved driver can now make a device unusable to subsequent drivers by an imbalance in their use of pci_enable/disable_device(). That is a serious problem for secondary drivers like vfio-pci, which are innocent of the transgressions of the previous driver. Since the solution of this problem is not immediate and requires further discussion, revert commit b4b55cda5874 and the issue it was supposed to address (a bug related to xen-pciback) will be taken care of in a different way going forward. Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-20netfilter: xt_TPROXY: fix invflags check in tproxy_tg6_check()Pablo Neira Ayuso
We have to check for IP6T_INV_PROTO in invflags, instead of flags. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Balazs Scheidler <bazsi@balabit.hu>
2015-03-20Bluetooth: Use HCI_MAX_AD_LENGTH constant instead hardcoded valueMarcel Holtmann
Using the HCI_MAX_AD_LENGTH for the max advertising data and max scan response data length makes more sense than hardcoding the value. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-20Bluetooth: Gracefully response to enabling LE on LE only devicesMarcel Holtmann
Currently the enabling of LE on LE only devices causes an error. This is a bit difference from other commands where trying to set the same existing settings causes a positive response. Fix this behavior for this single corner case. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-20KVM: PPC: Book3S HV: Fix instruction emulationPaul Mackerras
Commit 4a157d61b48c ("KVM: PPC: Book3S HV: Fix endianness of instruction obtained from HEIR register") had the side effect that we no longer reset vcpu->arch.last_inst to -1 on guest exit in the cases where the instruction is not fetched from the guest. This means that if instruction emulation turns out to be required in those cases, the host will emulate the wrong instruction, since vcpu->arch.last_inst will contain the last instruction that was emulated. This fixes it by making sure that vcpu->arch.last_inst is reset to -1 in those cases. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-20KVM: PPC: Book3S HV: Endian fix for accessing VPA yield countPaul Mackerras
The VPA (virtual processor area) is defined by PAPR and is therefore big-endian, so we need a be32_to_cpu when reading it in kvmppc_get_yield_count(). Without this, H_CONFER always fails on a little-endian host, causing SMP guests to waste time spinning on spinlocks. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-20KVM: PPC: Book3S HV: Fix spinlock/mutex ordering issue in kvmppc_set_lpcr()Paul Mackerras
Currently, kvmppc_set_lpcr() has a spinlock around the whole function, and inside that does mutex_lock(&kvm->lock). It is not permitted to take a mutex while holding a spinlock, because the mutex_lock might call schedule(). In addition, this causes lockdep to warn about a lock ordering issue: ====================================================== [ INFO: possible circular locking dependency detected ] 3.18.0-kvm-04645-gdfea862-dirty #131 Not tainted ------------------------------------------------------- qemu-system-ppc/8179 is trying to acquire lock: (&kvm->lock){+.+.+.}, at: [<d00000000ecc1f54>] .kvmppc_set_lpcr+0xf4/0x1c0 [kvm_hv] but task is already holding lock: (&(&vcore->lock)->rlock){+.+...}, at: [<d00000000ecc1ea0>] .kvmppc_set_lpcr+0x40/0x1c0 [kvm_hv] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&vcore->lock)->rlock){+.+...}: [<c000000000b3c120>] .mutex_lock_nested+0x80/0x570 [<d00000000ecc7a14>] .kvmppc_vcpu_run_hv+0xc4/0xe40 [kvm_hv] [<d00000000eb9f5cc>] .kvmppc_vcpu_run+0x2c/0x40 [kvm] [<d00000000eb9cb24>] .kvm_arch_vcpu_ioctl_run+0x54/0x160 [kvm] [<d00000000eb94478>] .kvm_vcpu_ioctl+0x4a8/0x7b0 [kvm] [<c00000000026cbb4>] .do_vfs_ioctl+0x444/0x770 [<c00000000026cfa4>] .SyS_ioctl+0xc4/0xe0 [<c000000000009264>] syscall_exit+0x0/0x98 -> #0 (&kvm->lock){+.+.+.}: [<c0000000000ff28c>] .lock_acquire+0xcc/0x1a0 [<c000000000b3c120>] .mutex_lock_nested+0x80/0x570 [<d00000000ecc1f54>] .kvmppc_set_lpcr+0xf4/0x1c0 [kvm_hv] [<d00000000ecc510c>] .kvmppc_set_one_reg_hv+0x4dc/0x990 [kvm_hv] [<d00000000eb9f234>] .kvmppc_set_one_reg+0x44/0x330 [kvm] [<d00000000eb9c9dc>] .kvm_vcpu_ioctl_set_one_reg+0x5c/0x150 [kvm] [<d00000000eb9ced4>] .kvm_arch_vcpu_ioctl+0x214/0x2c0 [kvm] [<d00000000eb940b0>] .kvm_vcpu_ioctl+0xe0/0x7b0 [kvm] [<c00000000026cbb4>] .do_vfs_ioctl+0x444/0x770 [<c00000000026cfa4>] .SyS_ioctl+0xc4/0xe0 [<c000000000009264>] syscall_exit+0x0/0x98 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&vcore->lock)->rlock); lock(&kvm->lock); lock(&(&vcore->lock)->rlock); lock(&kvm->lock); *** DEADLOCK *** 2 locks held by qemu-system-ppc/8179: #0: (&vcpu->mutex){+.+.+.}, at: [<d00000000eb93f18>] .vcpu_load+0x28/0x90 [kvm] #1: (&(&vcore->lock)->rlock){+.+...}, at: [<d00000000ecc1ea0>] .kvmppc_set_lpcr+0x40/0x1c0 [kvm_hv] stack backtrace: CPU: 4 PID: 8179 Comm: qemu-system-ppc Not tainted 3.18.0-kvm-04645-gdfea862-dirty #131 Call Trace: [c000001a66c0f310] [c000000000b486ac] .dump_stack+0x88/0xb4 (unreliable) [c000001a66c0f390] [c0000000000f8bec] .print_circular_bug+0x27c/0x3d0 [c000001a66c0f440] [c0000000000fe9e8] .__lock_acquire+0x2028/0x2190 [c000001a66c0f5d0] [c0000000000ff28c] .lock_acquire+0xcc/0x1a0 [c000001a66c0f6a0] [c000000000b3c120] .mutex_lock_nested+0x80/0x570 [c000001a66c0f7c0] [d00000000ecc1f54] .kvmppc_set_lpcr+0xf4/0x1c0 [kvm_hv] [c000001a66c0f860] [d00000000ecc510c] .kvmppc_set_one_reg_hv+0x4dc/0x990 [kvm_hv] [c000001a66c0f8d0] [d00000000eb9f234] .kvmppc_set_one_reg+0x44/0x330 [kvm] [c000001a66c0f960] [d00000000eb9c9dc] .kvm_vcpu_ioctl_set_one_reg+0x5c/0x150 [kvm] [c000001a66c0f9f0] [d00000000eb9ced4] .kvm_arch_vcpu_ioctl+0x214/0x2c0 [kvm] [c000001a66c0faf0] [d00000000eb940b0] .kvm_vcpu_ioctl+0xe0/0x7b0 [kvm] [c000001a66c0fcb0] [c00000000026cbb4] .do_vfs_ioctl+0x444/0x770 [c000001a66c0fd90] [c00000000026cfa4] .SyS_ioctl+0xc4/0xe0 [c000001a66c0fe30] [c000000000009264] syscall_exit+0x0/0x98 This fixes it by moving the mutex_lock()/mutex_unlock() pair outside the spin-locked region. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-20mac80211: remove drop_unencrypted codeJohannes Berg
This mechanism was historic, and only ever used by IBSS, which also doesn't need to have it as it properly manages station's 802.1X PAE state (or, with WEP, always has a key.) Remove the mechanism to clean up the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20Merge tag 'drm-intel-fixes-2015-03-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Backporting a couple of plane related fixes from drm-next to v4.0. * tag 'drm-intel-fixes-2015-03-19' of git://anongit.freedesktop.org/drm-intel: drm/i915: Make sure the primary plane is enabled before reading out the fb state drm/i915: Ensure plane->state->fb stays in sync with plane->fb
2015-03-20Merge tag 'drm-amdkfd-fixes-2015-03-19' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes - Fixing SDMA initialization when in non-HWS mode (debug mode) - Memory leak fix when destroying kernel queue - Fix number of available compute pipelines according to new firmware * tag 'drm-amdkfd-fixes-2015-03-19' of git://people.freedesktop.org/~gabbayo/linux: drm/radeon: Changing number of compute pipe lines drm/amdkfd: Fix SDMA queue init. in non-HWS mode drm/amdkfd: destroy mqd when destroying kernel queue
2015-03-20bcma: gpio: use predictable base for all BCM47XX busesRafał Miłecki
Some BCM47XX SoC routers have LEDs connected to extra PCIe bcma buses. Handling them in arch code requires predictable GPIO numbers. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20mwifiex: fix crash in SDIO RX pathAvinash Patil
With patch '960d6d08e39 "mwifiex: delay skb allocation for RX until cmd53 over"' we no more pass skb parameter to MP aggregation setup helper function. We instead pass length to be aggregated. This patch fixes an issue where we were passing length parameter of NULL skb to aggregation routine resulting into crash. We should instead pass rx_len received from mp_regs. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20brcmfmac: remove support for unreleased BCM4354 PCIeArend van Spriel
There are no known BCM4354 PCIe devices released so removing support from the driver until proven otherwise. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20brcmfmac: only support the BCM43455/7 deviceArend van Spriel
Recently support was added for the BCM4345 SDIO chipset by commit 9c51026509d7 ("brcmfmac: Add support for BCM4345 SDIO chipset") however this was verified using a BCM43455 device, which is a more recent revision of the chip. This patch assure that older revisions are not probed as they would fail. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Syed Asifful Dayyan <syedd@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20brcmfmac: add support for BCM43430 SDIO chipsetArend van Spriel
This patch added support for the BCM43430 802.11n SDIO chipset. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20brcmfmac: add MODULE_FIRMWARE() macros for bcm4356 PCIe deviceArend van Spriel
The BCM4356 PCIe wireless device was added recently but overlooked the fact that the MODULE_FIRMWARE() macros were missing for the firmwares needed by this device. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20brcmfmac: Remove unnecessary new-line in pcie console logging.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20brcmfmac: Update msgbuf commonring size for improved throughput.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20brcmfmac: Add necessary memory barriers for SDIO.Hante Meuleman
SDIO uses a thread to handle all communication with the device, for this data is exchanged between threads. This data needs proper memory barriers to make sure that data "exchange" is going correct. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20brcmfmac: avoid runtime-pm for sdio host controllerArend van Spriel
Several host controllers supporting runtime-pm are causing issues with our sdio wireless cards because they disable the sdio interrupt upon going into runtime suspend. This patch avoids that by doing a pm_runtime_forbid() call during the probe. Tested with Sony Vaio Duo 13 which uses sdhci-acpi host controller. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20mwifiex: missing curly braces in mwifiex_write_data_complete()Dan Carpenter
It's clear from the indenting that curly braces were intended here. Fixes: e35000ead491 ('mwifiex: preprocess packets from TX queue') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20rt2x00: add new rt2800usb device DWA 130Scott Branden
Add the USB Id to link the D-Link DWA 130 USB Wifi adapter to the rt2830 driver. Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Pieter Truter <ptruter@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: fall back to pseudo-DMS mcast for secure link and PBSSVladimir Kondratiev
Multicast is not yet properly supported for all connection types; actually, only non-secure AP is supported. For all other cases, fall back to old "pseudo-DMS" approach. Namely, for: - PBSS - secure connection When re-routing MCAST Rx->Tx on the AP, do not Tx back to the origin of the frame Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: implement broadcast/multicast dataVladimir Kondratiev
Use dedicated vring for multicast frames; this vring allocated for AP and PBSS (both P2P GO and client) configurations For short frames, use MCS0; for long - MCS1 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: add bcast structures to WMIVladimir Kondratiev
Sync with the wmi definitions from the firmware team Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: Prefer ether_addr_copy() over memcpy()Vladimir Kondratiev
Fix checkpatch warning: WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: Align Rx frames on 4*n+2 by having SNAPVladimir Kondratiev
For the networking code and for hardware network accelerators, it is better to have IP header 4*n aligned. On the other side, DMA on Rx path require buffer to be aligned on 4*n as well. Having 14 bytes of Ethernet header, these 2 alignment requests are in contradiction. To solve this, order hardware offload block to not remove SNAP header. This adds extra 6 bytes between addresses and ethertype, making it 20 bytes total. This way, both buffer and IP header are 4*n aligned. Remaining is only to remove SNAP by shifting addresses 6 bytes. This involves data copying, so this feature should be disabled unless required by the platform. Module parameter "rx_align_2" (bool, default - false) introduced to control this feature. Feature is completely disabled when parameter is false. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: fix check for FW responsivenessVladimir Kondratiev
"echo" used to be called when no firmware loaded to the NIC, this causes error output. Probe firmware with "echo" only after it returned "ready" event. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-20wil6210: optimize index manipulation in wil_vring_reap_rxVladimir Kondratiev
Use temporal variable for often used vring->swhead; and use proper index in debug printing - vring->swhead used before was modified in wil_vring_advance_head and then increased value was used in debug print Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-14 16:26:15 +0000