summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-02net: bcmgenet: Utilize correct struct device for all DMA operationsFlorian Fainelli
__bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the same struct device during unmap that was used for the map operation, which makes DMA-API debugging warn about it. Fix this by always using &priv->pdev->dev throughout the driver, using an identical device reference for all map/unmap calls. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Fix up a couple of field names in the CREDITS fileLinus Torvalds
Ozgur Karatas reported that the very first entry in the CREDITS file had the wrong tag for name (M: instead of N: - it happened when moving the entry from the MAINTAINERS file, where 'M:' stands for "Maintainer"). And when I went looking, I found a couple of other cases of wrong tagging too. Reported-by: Ozgur Karatas <mueddib@yandex.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-02NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040Daniele Palmas
This patch adds support for PID 0x1040 of Telit LE922A. The qmi adapter requires to have DTR set for proper working, so QMI_WWAN_QUIRK_DTR has been enabled. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02cdc_ether: Fix handling connection notificationKristian Evensen
Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") introduced a work-around in usbnet_cdc_status() for devices that exported cdc carrier on twice on connect. Before the commit, this behavior caused the link state to be incorrect. It was assumed that all CDC Ethernet devices would either export this behavior, or send one off and then one on notification (which seems to be the default behavior). Unfortunately, it turns out multiple devices sends a connection notification multiple times per second (via an interrupt), even when connection state does not change. This has been observed with several different USB LAN dongles (at least), for example 13b1:0041 (Linksys). After bfe9b9d2df66, the link state has been set as down and then up for each notification. This has caused a flood of Netlink NEWLINK messages and syslog to be flooded with messages similar to: cdc_ether 2-1:2.0 eth1: kevent 12 may have been dropped This commit fixes the behavior by reverting usbnet_cdc_status() to how it was before bfe9b9d2df66. The work-around has been moved to a separate status-function which is only called when a known, affect device is detected. v1->v2: * Do not open-code netif_carrier_ok() (thanks Henning Schild). * Call netif_carrier_off() instead of usb_link_change(). This prevents calling schedule_work() twice without giving the work queue a chance to be processed (thanks Bjørn Mork). Fixes: bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") Reported-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02ip6_offload: check segs for NULL in ipv6_gso_segment.Artem Savkov
segs needs to be checked for being NULL in ipv6_gso_segment() before calling skb_shinfo(segs), otherwise kernel can run into a NULL-pointer dereference: [ 97.811262] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc [ 97.819112] IP: [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0 [ 97.825214] PGD 0 [ 97.827047] [ 97.828540] Oops: 0000 [#1] SMP [ 97.831678] Modules linked in: vhost_net vhost macvtap macvlan nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bridge stp llc snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd snd_hda_core edac_core snd_hwdep kvm_amd snd_seq kvm snd_seq_device snd_pcm irqbypass snd_timer ppdev parport_serial snd parport_pc k10temp pcspkr soundcore parport sp5100_tco shpchp sg wmi i2c_piix4 acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod cdrom sd_mod ata_generic pata_acpi amdkfd amd_iommu_v2 radeon broadcom bcm_phy_lib i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci serio_raw tg3 firewire_ohci libahci pata_atiixp drm ptp libata firewire_core pps_core i2c_core crc_itu_t fjes dm_mirror dm_region_hash dm_log dm_mod [ 97.927721] CPU: 1 PID: 3504 Comm: vhost-3495 Not tainted 4.9.0-7.el7.test.x86_64 #1 [ 97.935457] Hardware name: AMD Snook/Snook, BIOS ESK0726A 07/26/2010 [ 97.941806] task: ffff880129a1c080 task.stack: ffffc90001bcc000 [ 97.947720] RIP: 0010:[<ffffffff816e52f9>] [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0 [ 97.956251] RSP: 0018:ffff88012fc43a10 EFLAGS: 00010207 [ 97.961557] RAX: 0000000000000000 RBX: ffff8801292c8700 RCX: 0000000000000594 [ 97.968687] RDX: 0000000000000593 RSI: ffff880129a846c0 RDI: 0000000000240000 [ 97.975814] RBP: ffff88012fc43a68 R08: ffff880129a8404e R09: 0000000000000000 [ 97.982942] R10: 0000000000000000 R11: ffff880129a84076 R12: 00000020002949b3 [ 97.990070] R13: ffff88012a580000 R14: 0000000000000000 R15: ffff88012a580000 [ 97.997198] FS: 0000000000000000(0000) GS:ffff88012fc40000(0000) knlGS:0000000000000000 [ 98.005280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.011021] CR2: 00000000000000cc CR3: 0000000126c5d000 CR4: 00000000000006e0 [ 98.018149] Stack: [ 98.020157] 00000000ffffffff ffff88012fc43ac8 ffffffffa017ad0a 000000000000000e [ 98.027584] 0000001300000000 0000000077d59998 ffff8801292c8700 00000020002949b3 [ 98.035010] ffff88012a580000 0000000000000000 ffff88012a580000 ffff88012fc43a98 [ 98.042437] Call Trace: [ 98.044879] <IRQ> [ 98.046803] [<ffffffffa017ad0a>] ? tg3_start_xmit+0x84a/0xd60 [tg3] [ 98.053156] [<ffffffff815eeee0>] skb_mac_gso_segment+0xb0/0x130 [ 98.059158] [<ffffffff815eefd3>] __skb_gso_segment+0x73/0x110 [ 98.064985] [<ffffffff815ef40d>] validate_xmit_skb+0x12d/0x2b0 [ 98.070899] [<ffffffff815ef5d2>] validate_xmit_skb_list+0x42/0x70 [ 98.077073] [<ffffffff81618560>] sch_direct_xmit+0xd0/0x1b0 [ 98.082726] [<ffffffff815efd86>] __dev_queue_xmit+0x486/0x690 [ 98.088554] [<ffffffff8135c135>] ? cpumask_next_and+0x35/0x50 [ 98.094380] [<ffffffff815effa0>] dev_queue_xmit+0x10/0x20 [ 98.099863] [<ffffffffa09ce057>] br_dev_queue_push_xmit+0xa7/0x170 [bridge] [ 98.106907] [<ffffffffa09ce161>] br_forward_finish+0x41/0xc0 [bridge] [ 98.113430] [<ffffffff81627cf2>] ? nf_iterate+0x52/0x60 [ 98.118735] [<ffffffff81627d6b>] ? nf_hook_slow+0x6b/0xc0 [ 98.124216] [<ffffffffa09ce32c>] __br_forward+0x14c/0x1e0 [bridge] [ 98.130480] [<ffffffffa09ce120>] ? br_dev_queue_push_xmit+0x170/0x170 [bridge] [ 98.137785] [<ffffffffa09ce4bd>] br_forward+0x9d/0xb0 [bridge] [ 98.143701] [<ffffffffa09cfbb7>] br_handle_frame_finish+0x267/0x560 [bridge] [ 98.150834] [<ffffffffa09d0064>] br_handle_frame+0x174/0x2f0 [bridge] [ 98.157355] [<ffffffff8102fb89>] ? sched_clock+0x9/0x10 [ 98.162662] [<ffffffff810b63b2>] ? sched_clock_cpu+0x72/0xa0 [ 98.168403] [<ffffffff815eccf5>] __netif_receive_skb_core+0x1e5/0xa20 [ 98.174926] [<ffffffff813659f9>] ? timerqueue_add+0x59/0xb0 [ 98.180580] [<ffffffff815ed548>] __netif_receive_skb+0x18/0x60 [ 98.186494] [<ffffffff815ee625>] process_backlog+0x95/0x140 [ 98.192145] [<ffffffff815edccd>] net_rx_action+0x16d/0x380 [ 98.197713] [<ffffffff8170cff1>] __do_softirq+0xd1/0x283 [ 98.203106] [<ffffffff8170b2bc>] do_softirq_own_stack+0x1c/0x30 [ 98.209107] <EOI> [ 98.211029] [<ffffffff8108a5c0>] do_softirq+0x50/0x60 [ 98.216166] [<ffffffff815ec853>] netif_rx_ni+0x33/0x80 [ 98.221386] [<ffffffffa09eeff7>] tun_get_user+0x487/0x7f0 [tun] [ 98.227388] [<ffffffffa09ef3ab>] tun_sendmsg+0x4b/0x60 [tun] [ 98.233129] [<ffffffffa0b68932>] handle_tx+0x282/0x540 [vhost_net] [ 98.239392] [<ffffffffa0b68c25>] handle_tx_kick+0x15/0x20 [vhost_net] [ 98.245916] [<ffffffffa0abacfe>] vhost_worker+0x9e/0xf0 [vhost] [ 98.251919] [<ffffffffa0abac60>] ? vhost_umem_alloc+0x40/0x40 [vhost] [ 98.258440] [<ffffffff81003a47>] ? do_syscall_64+0x67/0x180 [ 98.264094] [<ffffffff810a44d9>] kthread+0xd9/0xf0 [ 98.268965] [<ffffffff810a4400>] ? kthread_park+0x60/0x60 [ 98.274444] [<ffffffff8170a4d5>] ret_from_fork+0x25/0x30 [ 98.279836] Code: 8b 93 d8 00 00 00 48 2b 93 d0 00 00 00 4c 89 e6 48 89 df 66 89 93 c2 00 00 00 ff 10 48 3d 00 f0 ff ff 49 89 c2 0f 87 52 01 00 00 <41> 8b 92 cc 00 00 00 48 8b 80 d0 00 00 00 44 0f b7 74 10 06 66 [ 98.299425] RIP [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0 [ 98.305612] RSP <ffff88012fc43a10> [ 98.309094] CR2: 00000000000000cc [ 98.312406] ---[ end trace 726a2c7a2d2d78d0 ]--- Signed-off-by: Artem Savkov <asavkov@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_netSowmini Varadhan
If some error is encountered in rds_tcp_init_net, make sure to unregister_netdevice_notifier(), else we could trigger a panic later on, when the modprobe from a netns fails. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"Eli Cooper
This reverts commit ae148b085876fa771d9ef2c05f85d4b4bf09ce0d ("ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"). skb->protocol is now set in __ip_local_out() and __ip6_local_out() before dst_output() is called. It is no longer necessary to do it for each tunnel. Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02ipv6: Set skb->protocol properly for local outputEli Cooper
When xfrm is applied to TSO/GSO packets, it follows this path: xfrm_output() -> xfrm_output_gso() -> skb_gso_segment() where skb_gso_segment() relies on skb->protocol to function properly. This patch sets skb->protocol to ETH_P_IPV6 before dst_output() is called, fixing a bug where GSO packets sent through an ipip6 tunnel are dropped when xfrm is involved. Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02ipv4: Set skb->protocol properly for local outputEli Cooper
When xfrm is applied to TSO/GSO packets, it follows this path: xfrm_output() -> xfrm_output_gso() -> skb_gso_segment() where skb_gso_segment() relies on skb->protocol to function properly. This patch sets skb->protocol to ETH_P_IP before dst_output() is called, fixing a bug where GSO packets sent through a sit tunnel are dropped when xfrm is involved. Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02packet: fix race condition in packet_set_ringPhilip Pettersson
When packet_set_ring creates a ring buffer it will initialize a struct timer_list if the packet version is TPACKET_V3. This value can then be raced by a different thread calling setsockopt to set the version to TPACKET_V1 before packet_set_ring has finished. This leads to a use-after-free on a function pointer in the struct timer_list when the socket is closed as the previously initialized timer will not be deleted. The bug is fixed by taking lock_sock(sk) in packet_setsockopt when changing the packet version while also taking the lock at the start of packet_set_ring. Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by: Philip Pettersson <philip.pettersson@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "All architectures avoid memory corruption in an error path. ARM prevents bogus acknowledgement of interrupts" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: use after free in kvm_ioctl_create_device() KVM: arm/arm64: vgic: Don't notify EOI for non-SPIs
2016-12-02Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Here is the revert for the regression of the i2c-octeon driver I mentioned last time. I wished for a bit more feedback, but all people working actively on it are in need of this patch, so here it goes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: octeon: thunderx: Limit register access retries"
2016-12-02net: ethernet: altera: TSE: do not use tx queue lock in tx completion handlerLino Sanfilippo
The driver already uses its private lock for synchronization between xmit and xmit completion handler making the additional use of the xmit_lock unnecessary. Furthermore the driver does not set NETIF_F_LLTX resulting in xmit to be called with the xmit_lock held and then taking the private lock while xmit completion handler does the reverse, first take the private lock, then the xmit_lock. Fix these issues by not taking the xmit_lock in the tx completion handler. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffersLino Sanfilippo
An explicit dma sync for device directly after mapping as well as an explicit dma sync for cpu directly before unmapping is unnecessary and costly on the hotpath. So remove these calls. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02default exported asm symbols to zeroArnd Bergmann
With binutils-2.26 and before, a weak missing symbol was kept during the final link, and a missing CRC for an export would lead to that CRC being treated as zero implicitly. With binutils-2.27, the crc symbol gets dropped, and any module trying to use it will fail to load. This sets the weak CRC symbol to zero explicitly, making it defined in vmlinux, which in turn lets us load the modules referring to that CRC. The comment above the __CRC_SYMBOL macro suggests that this was always the intention, although it also seems that all symbols defined in C have a correct CRC these days, and only the exports that are now done in assembly need this. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Adam Borowski <kilobyte@angband.pl> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-02arm64: dts: juno: fix cluster sleep state entry latency on all SoC versionsSudeep Holla
The core and the cluster sleep state entry latencies can't be same as cluster sleep involves more work compared to core level e.g. shared cache maintenance. Experiments have shown on an average about 100us more latency for the cluster sleep state compared to the core level sleep. This patch fixes the entry latency for the cluster sleep state. Fixes: 28e10a8f3a03 ("arm64: dts: juno: Add idle-states to device tree") Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: "Jon Medhurst (Tixy)" <tixy@linaro.org> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-12-02Merge branch 'stmmac-probe-error-handling-and-phydev-leaks'David S. Miller
Johan Hovold says: ==================== net: stmmac: fix probe error handling and phydev leaks This series fixes a number of issues with the stmmac-driver probe error handling, which for example left clocks enabled after probe failures. The final patch fixes a failure to deregister and free any fixed-link PHYs that were registered during probe on probe errors and on driver unbind. It also fixes a related of-node leak on late probe errors. This series depends on the of_phy_deregister_fixed_link() helper that was just merged to net. As mentioned earlier, one staging driver also suffers from a similar leak and can be fixed up once the above mentioned helper hits mainline. Note that these patches have only been compile tested. ==================== Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: ethernet: stmmac: fix of-node and fixed-link-phydev leaksJohan Hovold
Make sure to deregister and free any fixed-link phy registered during probe on probe errors and on driver unbind by adding a new glue helper function. Drop the of-node reference taken in the same path also on late probe errors (and not just on driver unbind) by moving the put from stmmac_dvr_remove() to the new helper. Fixes: 277323814e49 ("stmmac: add fixed-link device-tree support") Fixes: 4613b279bee7 ("ethernet: stmicro: stmmac: add missing of_node_put after calling of_parse_phandle") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: ethernet: stmmac: platform: fix outdated function headerJohan Hovold
Fix the OF-helper function header to reflect that the function no longer has a platform-data parameter. Fixes: b0003ead75f3 ("stmmac: make stmmac_probe_config_dt return the platform data struct") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: ethernet: stmmac: dwmac-meson8b: fix probe error pathJohan Hovold
Make sure to disable clocks before returning on late probe errors. Fixes: 566e82516253 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: ethernet: stmmac: dwmac-generic: fix probe error pathJohan Hovold
Make sure to call any exit() callback to undo the effect of init() before returning on late probe errors. Fixes: cf3f047b9af4 ("stmmac: move hw init in the probe (v2)") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: ethernet: stmmac: dwmac-rk: fix probe error pathJohan Hovold
Make sure to disable runtime PM, power down the PHY, and disable clocks before returning on late probe errors. Fixes: 27ffefd2d109 ("stmmac: dwmac-rk: create a new probe function") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: ethernet: stmmac: dwmac-sti: fix probe error pathJohan Hovold
Make sure to disable clocks before returning on late probe errors. Fixes: 8387ee21f972 ("stmmac: dwmac-sti: turn setup callback into a probe function") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net: ethernet: stmmac: dwmac-socfpga: fix use-after-free on probe errorsJohan Hovold
Make sure to call stmmac_dvr_remove() before returning on late probe errors so that memory is freed, clocks are disabled, and the netdev is deregistered before its resources go away. Fixes: 3c201b5a84ed ("net: stmmac: socfpga: Remove re-registration of reset controller") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02net/rtnetlink: fix attribute name in nlmsg_size() commentsTobias Klauser
Use the correct attribute constant names IFLA_GSO_MAX_{SEGS,SIZE} instead of IFLA_MAX_GSO_{SEGS,SIZE} for the comments int nlmsg_size(). Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02Merge tag 'perf-core-for-mingo-20161201' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Support AArch64 in the 'annotate' code, native/local and cross-arch/remote (Kim Phillips) - Allow considering just events in a given time interval, via the '--time start.s.ms,end.s.ms' command line, added to 'perf kmem', 'perf report', 'perf sched timehist' and 'perf script' (David Ahern) - Add option to stop printing a callchain at one of a given group of symbol names (David Ahern) - Handle CPU migration events in 'perf sched timehist' (David Ahern) - Track memory freed in 'perf kmem stat' (David Ahern) Infrastructure: - Add initial support (and perf test entry) for tooling hooks, starting with 'record_start' and 'record_end', that will have as its initial user the eBPF infrastructure, where perf_ prefixed functions will be JITed and run when such hooks are called (Wang Nan) - Remove redundant "test" and similar strings from 'perf test' descriptions (Arnaldo Carvalho de Melo) - Implement assorted libbpf improvements (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-02Merge branch 'linus' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-01Merge tag 'pci-v4.9-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "PCI fixes: - Fix Read Completion Boundary setting, which fixes a boot failure on IBM x3850 with Mellanox MT27500 ConnectX-3 - Update some MAINTAINERS entries and email addresses" * tag 'pci-v4.9-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Set Read Completion Boundary to 128 iff Root Port supports it (_HPX) PCI: Export pcie_find_root_port PCI: designware-plat: Update author email PCI: designware: Change maintainer to Joao Pinto MAINTAINERS: Add devicetree binding to PCI i.MX6 entry MAINTAINERS: Update Richard Zhu's email address
2016-12-01ixgbe/ixgbevf: Don't use lco_csum to compute IPv4 checksumAlexander Duyck
In the case of IPIP and SIT tunnel frames the outer transport header offset is actually set to the same offset as the inner transport header. This results in the lco_csum call not doing any checksum computation over the inner IPv4/v6 header data. In order to account for that I am updating the code so that we determine the location to start the checksum ourselves based on the location of the IPv4 header and the length. Fixes: b83e30104bd9 ("ixgbe/ixgbevf: Add support for GSO partial") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01igb/igbvf: Don't use lco_csum to compute IPv4 checksumAlexander Duyck
In the case of IPIP and SIT tunnel frames the outer transport header offset is actually set to the same offset as the inner transport header. This results in the lco_csum call not doing any checksum computation over the inner IPv4/v6 header data. In order to account for that I am updating the code so that we determine the location to start the checksum ourselves based on the location of the IPv4 header and the length. Fixes: e10715d3e961 ("igb/igbvf: Add support for GSO partial") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01net: asix: Fix AX88772_suspend() USB vendor commands failure issuesallan
The change fixes AX88772_suspend() USB vendor commands failure issues. Signed-off-by: Allan Chou <allan@asix.com.tw> Tested-by: Allan Chou <allan@asix.com.tw> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01Merge branch 'overlayfs-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fix from Miklos Szeredi: "This fixes a regression introduced in 4.8" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix d_real() for stacked fs
2016-12-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "We are disabling automatic probing of BYD touchpads as it results in too many false positives, and the hardware is not terribly popular and having the protocol support does not result in significantly improved user experience. We also change keycode for KEY_DATA to avoid clashing with KEY_FASTREVERSE. Luckily this newish code is used by CEC framework that is still in staging, so it is extremely unlikely that someone has already started using this keycode" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: change KEY_DATA from 0x275 to 0x277 Input: psmouse - disable automatic probing of BYD touchpads
2016-12-01kbuild: make sure autoksyms.h exists earlyNicolas Pitre
Some people are able to trigger a race where autoksyms.h is used before its empty version is even created. Let's create it at the same time as the directory holding it is created. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2016-12-01 1) Change the error value when someone tries to run 32bit userspace on a 64bit host from -ENOTSUPP to the userspace exported -EOPNOTSUPP. Fix from Yi Zhao. 2) On inbound, ESN sequence numbers are already in network byte order. So don't try to convert it again, this fixes integrity verification for ESN. Fixes from Tobias Brunner. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net This is a large batch of Netfilter fixes for net, they are: 1) Three patches to fix NAT conversion to rhashtable: Switch to rhlist structure that allows to have several objects with the same key. Moreover, fix wrong comparison logic in nf_nat_bysource_cmp() as this is expecting a return value similar to memcmp(). Change location of the nat_bysource field in the nf_conn structure to avoid zeroing this as it breaks interaction with SLAB_DESTROY_BY_RCU and lead us to crashes. From Florian Westphal. 2) Don't allow malformed fragments go through in IPv6, drop them, otherwise we hit GPF, patch from Florian Westphal. 3) Fix crash if attributes are missing in nft_range, from Liping Zhang. 4) Fix arptables 32-bits userspace 64-bits kernel compat, from Hongxu Jia. 5) Two patches from David Ahern to fix netfilter interaction with vrf. From David Ahern. 6) Fix element timeout calculation in nf_tables, we take milliseconds from userspace, but we use jiffies from kernelspace. Patch from Anders K. Pedersen. 7) Missing validation length netlink attribute for nft_hash, from Laura Garcia. 8) Fix nf_conntrack_helper documentation, we don't default to off anymore for a bit of time so let's get this in sync with the code. I know is late but I think these are important, specifically the NAT bits, as they are mostly addressing fallout from recent changes. I also read there are chances to have -rc8, if that is the case, that would also give us a bit more time to test this. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01perf annotate: AArch64 supportKim Phillips
This is a regex converted version from the original: https://lkml.org/lkml/2016/5/19/461 Add basic support to recognise AArch64 assembly. This allows perf to identify AArch64 instructions that branch to other parts within the same function, thereby properly annotating them. Rebased onto new cross-arch annotation bits: https://lkml.org/lkml/2016/11/25/546 Sample output: security_file_permission vmlinux 5.80 │ ← ret ▒ │70: ldr w0, [x21,#68] ▒ 4.44 │ ↓ tbnz d0 ▒ │ mov w0, #0x24 // #36 ▒ 1.37 │ ands w0, w22, w0 ▒ │ ↑ b.eq 60 ▒ 1.37 │ ↓ tbnz e4 ▒ │ mov w19, #0x20000 // #131072 ▒ 1.02 │ ↓ tbz ec ▒ │90:┌─→ldr x3, [x21,#24] ▒ 1.37 │ │ add x21, x21, #0x10 ▒ │ │ mov w2, w19 ▒ 1.02 │ │ mov x0, x21 ▒ │ │ mov x1, x3 ▒ 1.71 │ │ ldr x20, [x3,#48] ▒ │ │→ bl __fsnotify_parent ▒ 0.68 │ │↑ cbnz 60 ▒ │ │ mov x2, x21 ▒ 1.37 │ │ mov w1, w19 ▒ │ │ mov x0, x20 ▒ 0.68 │ │ mov w5, #0x0 // #0 ▒ │ │ mov x4, #0x0 // #0 ▒ 1.71 │ │ mov w3, #0x1 // #1 ▒ │ │→ bl fsnotify ▒ 1.37 │ │↑ b 60 ▒ │d0:│ mov w0, #0x0 // #0 ▒ │ │ ldp x19, x20, [sp,#16] ▒ │ │ ldp x21, x22, [sp,#32] ▒ │ │ ldp x29, x30, [sp],#48 ▒ │ │← ret ▒ │e4:│ mov w19, #0x10000 // #65536 ▒ │ └──b 90 ◆ │ec: brk #0x800 ▒ Press 'h' for help on key bindings Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Chris Ryder <chris.ryder@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20161130092344.012e18e3e623bea395162f95@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf annotate: Use arch->objdump.comment_char in dec__parse()Kim Phillips
Presume neglected in commit 786c1b5 "perf annotate: Start supporting cross arch annotation". This doesn't fix a bug since none of the affected arches support parsing dec/inc instructions yet. Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Ryder <chris.ryder@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20161130092333.1cca5dd2c77e1790d61c1e9c@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf report: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: Using the perf.data file captured via 'perf kmem record': # perf report --header-only # ======== # captured on: Tue Nov 29 16:01:53 2016 # hostname : jouet # os release : 4.8.8-300.fc25.x86_64 # perf version : 4.9.rc6.g5a6aca # arch : x86_64 # nrcpus online : 4 # nrcpus avail : 4 # cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz # cpuid : GenuineIntel,6,61,4 # total memory : 20254660 kB # cmdline : /home/acme/bin/perf kmem record usleep 1 # event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ # event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl # event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type # event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s # event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } = # event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im # HEADER_CACHE info available, use -I to display # missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT # ======== # # # Looking at just the histogram entries for the first event: # # perf report | head -33 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 40 of event 'kmem:kmalloc' # Event count (approx.): 40 # # Overhead Trace output # ........ ............................................................................................................... # 37.50% call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL 10.00% call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO 7.50% call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO 2.50% call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO 2.50% call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL 2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO 2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO 2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO # # # And then limiting using the example for 'perf kmem stat --time' used # # in the previous changeset committer note we see that there were no # # kmem:kmalloc in that last part of the file, but there were some # # kmem:kmem_cache_alloc ones: # # perf report --time 20119.782088, --stdio # # Total Lost Samples: 0 # # Samples: 0 of event 'kmem:kmalloc' # Event count (approx.): 0 # # Overhead Trace output # ........ ............ # # Samples: 0 of event 'kmem:kmalloc_node' # Event count (approx.): 0 # # Overhead Trace output # ........ ............ # # Samples: 0 of event 'kmem:kfree' # Event count (approx.): 0 # # Overhead Trace output # ........ ............ # # Samples: 8 of event 'kmem:kmem_cache_alloc' # Event count (approx.): 8 # # Overhead Trace output # ........ .................................................................................................................. # 75.00% call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO 12.50% call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK 12.50% call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf kmem: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf kmem record usleep 1 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 1.540 MB perf.data (2049 samples) ] # perf evlist kmem:kmalloc kmem:kmalloc_node kmem:kfree kmem:kmem_cache_alloc kmem:kmem_cache_alloc_node kmem:kmem_cache_free # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # # # Use 'perf script' to get a first approach, select a chunk for then using # # with 'perf kmem stat --time' # # perf script | tail -15 usleep 9889 [0] 20119.782088: kmem:kmem_cache_free: (selinux_file_free_security+0x27) call_site=ffffffffb936aa07 ptr=0xffff888a1df49fc0 perf 9888 [3] 20119.782088: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782089: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782090: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782090: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO usleep 9889 [0] 20119.782091: kmem:kmem_cache_alloc: (__sigqueue_alloc+0x4a) call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK perf 9888 [3] 20119.782091: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782093: kmem:kmem_cache_free: (__sigqueue_free.part.17+0x33) call_site=ffffffffb90ad3f3 ptr=0xffff8889f071f6e0 perf 9888 [3] 20119.782098: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782098: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782099: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782100: kmem:kmem_cache_alloc: (alloc_buffer_head+0x21) call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782101: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 perf 9888 [3] 20119.782102: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO perf 9888 [3] 20119.782103: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0 # # # stats for the whole perf.data file, i.e. no interval specified # # perf kmem stat SUMMARY (SLAB allocator) ======================== Total bytes requested: 172,628 Total bytes allocated: 173,088 Total bytes freed: 161,280 Net total bytes allocated: 11,808 Total bytes wasted on internal fragmentation: 460 Internal fragmentation: 0.265761% Cross CPU allocations: 0/851 # # # stats for an end open interval, after a certain time: # # perf kmem stat --time 20119.782088, SUMMARY (SLAB allocator) ======================== Total bytes requested: 552 Total bytes allocated: 552 Total bytes freed: 448 Net total bytes allocated: 104 Total bytes wasted on internal fragmentation: 0 Internal fragmentation: 0.000000% Cross CPU allocations: 0/8 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-6-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf sched timehist: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for time window and analyze a segment of interest within that window. Committer notes: Testing it: # perf sched record -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ] # # perf sched timehist | head -18 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- -------- 19818.635579 [0002] <idle> 0.000 0.000 0.000 19818.635613 [0000] perf[9116] 0.000 0.000 0.000 19818.635676 [0000] <idle> 0.000 0.000 0.063 19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001 19818.635696 [0002] perf[9117] 0.000 0.004 0.116 19818.635702 [0000] <idle> 0.001 0.000 0.024 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696, Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- -------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.636263 [0000] usleep[9117] 0.005 0.000 0.560 19818.636316 [0000] <idle> 0.560 0.000 0.053 19818.636358 [0002] <idle> 0.129 0.000 0.649 19818.636358 [0000] usleep[9117] 0.053 0.002 0.042 # # perf sched timehist --time 19818.635696,19818.635709 Samples do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ------------- ------ --------------- --------- --------- --------- 19818.635696 [0002] perf[9117] 0.000 0.120 0.000 19818.635702 [0000] <idle> 0.019 0.000 0.006 19818.635709 [0002] migration/2[25] 0.000 0.003 0.012 19818.635709 [0000] usleep[9117] 0.005 0.000 0.006 # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf script: Add option to specify time window of interestDavid Ahern
Add option to allow user to control analysis window. e.g., collect data for some amount of time and analyze a segment of interest within that window. Committer notes: Testing it: # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # # perf script --hide-call-graph | head -15 swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370048: 126 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370049: 2701 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370051: 58823 cycles:ppp: ffffffffb90cd2e0 idle_cpu (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370059: 1 cycles:ppp: ffffffffb91a713a ctx_resched (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370062: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux) perf 5124 [2] 9693.370076: 1 cycles:ppp: ffffffffb91a76c1 __perf_event_enable (.../4.8.8-300.fc25.x86_64/vmlinux) perf 5124 [2] 9693.370091: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) perf 5124 [2] 9693.370095: 3 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) # # perf script --hide-call-graph --time ,9693.370048 swapper 0 [0] 9693.370039: 1 cycles:ppp: ffffffffb90072ad x86_pmu_enable (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370044: 1 cycles:ppp: ffffffffb900ca1b intel_pmu_handle_irq (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [0] 9693.370046: 7 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) # perf script --hide-call-graph --time 9693.370064,9693.370076 swapper 0 [1] 9693.370064: 13 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370065: 250 cycles:ppp: ffffffffb902fd93 native_sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370067: 5269 cycles:ppp: ffffffffb902fe79 sched_clock (.../4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [1] 9693.370069: 114602 cycles:ppp: ffffffffb90c1c5a atomic_notifier_call_chain (.../4.8.8-300.fc25.x86_64/vmlinux) # Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf tools: Move parse_nsec_time to time-utils.cDavid Ahern
Code move only; no functional change intended. Committer notes: Fix the build on Ubuntu 16.04 x86-64 cross-compiling to S/390, with this set of auto-detected features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ on ] Where it was failing with: CC /tmp/build/perf/util/time-utils.o util/time-utils.c: In function 'parse_nsec_time': util/time-utils.c:17:13: error: implicit declaration of function 'strtoul' [-Werror=implicit-function-declaration] time_sec = strtoul(str, &end, 10); ^ util/time-utils.c:17:2: error: nested extern declaration of 'strtoul' [-Werror=nested-externs] time_sec = strtoul(str, &end, 10); ^ util/time-utils.c: In function 'perf_time__parse_str': util/time-utils.c:93:2: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration] free(str); ^ util/time-utils.c:93:2: error: incompatible implicit declaration of built-in function 'free' [-Werror] util/time-utils.c:93:2: note: include '<stdlib.h>' or provide a declaration of 'free' Do as suggested and add a '#include <stdlib.h>' to get the free() and strtoul() declarations and fix the build. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01perf tools: Add time-based utility functionsDavid Ahern
Add function to parse a user time string of the form <start>,<stop> where start and stop are time in sec.nsec format. Both start and stop times are optional. Add function to determine if a sample time is within a given time time window of interest. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-01KVM: use after free in kvm_ioctl_create_device()Dan Carpenter
We should move the ops->destroy(dev) after the list_del(&dev->vm_node) so that we don't use "dev" after freeing it. Fixes: a28ebea2adc4 ("KVM: Protect device ops->create and list_add with kvm->lock") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-12-01Merge tag 'kvm-arm-for-4.9-rc7' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM updates for v4.9-rc7 - Do not call kvm_notify_acked for PPIs
2016-12-01can: peak: Add support for PCAN-USB X6 USB interfaceStephane Grosjean
This adds support for PEAK-System PCAN-USB X6 USB to CAN interface. The CAN FD adapter PCAN-USB X6 allows the connection of up to 6 CAN FD or CAN networks to a computer via USB. The interface is installed in an aluminum profile casing and is shipped in versions with D-Sub connectors or M12 circular connectors. The PCAN-USB X6 registers in the USB sub-system as if 3x PCAN-USB-Pro FD adapters were plugged. So, this patch: - updates the PEAK_USB entry of the corresponding Kconfig file - defines and adds the device id. of the PCAN-USB X6 (0x0014) into the table of supported device ids - defines and adds the new software structure implementing the PCAN-USB X6, which is obviously a clone of the software structure implementing the PCAN-USB Pro FD. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-01can: peak: Fix bittiming fields size in bitsStephane Grosjean
This fixes the bitimings fields ranges supported by all the CAN-FD USB interfaces of the PEAK-System CAN-FD adapters. Very first development versions of the IP core API defined smaller TSGEx and SJW fields for both nominal and data bittimings records than the production versions. This patch fixes them by enlarging their sizes to the actual values: field: old size: fixed size: nominal TSGEG1 6 8 nominal TSGEG2 4 7 nominal SJW 4 7 data TSGEG1 4 5 data TSGEG2 3 4 data SJW 2 4 Note that this has no other consequences than offering larger choice to bitrate encoding. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-01powerpc/64: Fix placement of .text to be immediately following .head.textNicholas Piggin
Do not introduce any additional alignment. Placement of text section will be set by fixed section macros. Without this, output section alignment defaults to 4096, which makes BookE text section start at 0x1000 when it is expected to start at 0x100. This was introduced by commit 57f266497d81 ("powerpc: Use gas sections for arranging exception vectors") and was caught with the scripted head section checker (not yet merged). Fixes: 57f266497d81 ("powerpc: Use gas sections for arranging exception vectors") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-12-01powerpc/eeh: Fix deadlock when PE frozen state can't be clearedAndrew Donnellan
In eeh_reset_device(), we take the pci_rescan_remove_lock immediately after after we call eeh_reset_pe() to reset the PCI controller. We then call eeh_clear_pe_frozen_state(), which can return an error. In this case, we bail out of eeh_reset_device() without calling pci_unlock_rescan_remove(). Add a call to pci_unlock_rescan_remove() in the eeh_clear_pe_frozen_state() error path so that we don't cause a deadlock later on. Reported-by: Pradipta Ghosh <pradghos@in.ibm.com> Fixes: 78954700631f ("powerpc/eeh: Avoid I/O access during PE reset") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-20 20:08:49 +0000