| Age | Commit message (Collapse) | Author |
|---|
|
Currently, the secondary CPUs in Hyper-V VTL context lack support for
parallel startup. Therefore, relying on the single initial_stack fetched
from the current task structure suffices for all vCPUs.
However, common initial_stack risks stack corruption when parallel startup
is enabled. In order to facilitate parallel startup, use the initial_stack
from the per CPU idle thread instead of the current task.
Fixes: 3be1bc2fe9d2 ("x86/hyperv: VTL support for Hyper-V")
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1709452896-13342-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1709452896-13342-1-git-send-email-ssengar@linux.microsoft.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
- Support for Display, TCSR, GPU, and Camera clock controllers for
Qualcomm's X1 Elite SoC
- Typo fixes in the IPQ5018 GCC driver
- Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
- Properly terminate frequency tables in different qcom clk drivers
- Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
- Add missing UFS CLKREF clks on Qualcomm SC8180X
- Avoid significant delays during boot by adding a softdep on rpmhpd to SDM845 gcc driver
- Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC driver
- Fix the custom GPU GX "do-nothing" method in the GDSC driver
- Add an external regulator to GX GDSC on SC8280XP GPU clk driver
- Switch display, GPU, video, and camera clock drivers to module_platform_driver()
- Set a longer delay for Venus resets on many Qualcomm SoCs
- Correct the GDSC wait times in the Qualcomm SDM845 display clk driver
- Remove the unused Qualcomm sc7180 modem clk driver
* tag 'qcom-clk-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (62 commits)
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
clk: qcom: drop the SC7180 Modem subsystem clock driver
clk: qcom: Use qcom_branch_set_clk_en()
clk: qcom: branch: Add a helper for setting the enable bit
clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks
clk: qcom: gcc-msm8953: add more resets
clk: qcom: videocc-*: switch to module_platform_driver
...
|
|
clk-amlogic
Pull Amlogic clk driver update from Jerome Brunet:
- Fix clock listing Oops on Amlogic axg
* tag 'clk-meson-v6.9-1' of https://github.com/BayLibre/clk-meson:
clk: meson: Add missing clocks to axg_clk_regmaps
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/90054b8b2e118bc04ec37e044d0ac518bb177cf4.1709721042.git.u.kleine-koenig@pengutronix.de
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/312ec7052c4e327c0b365e167a8e86b406cb7dfa.1709721042.git.u.kleine-koenig@pengutronix.de
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/ba373ce7341518216a4940e76ce61d759b912b3d.1709721042.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Disambiguate the usage of dev as a variable name; it is usually best to
keep it reserved for struct device pointers. Avoid having multiple
names for the same struct pointer (previously: dev, nmk, nmk_i2c).
Fix whitespace code style; return indented twice, spacing besides infix
operators, align function call arguments to opening parenthesis. Remove
useless cast to unused return value from init_hw(). Introduce local dev
variable in probe() to alias &adev->dev.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add EyeQ5 bindings to the existing Nomadik I2C dt-bindings. Add the
EyeQ5-specific property behind a conditional. Add an example for this
compatible.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small char/misc and other driver subsystem fixes for
reported issues that have been in my tree.
Included in here are fixes for:
- iio driver fixes for reported problems
- much reported bugfix for a lis3lv02d_i2c regression
- comedi driver bugfix
- mei new device ids
- mei driver fixes
- counter core fix
All of these have been in linux-next with no reported issues, some for
many weeks"
* tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: gsc_proxy: match component when GSC is on different bus
misc: fastrpc: Pass proper arguments to scm call
comedi: comedi_test: Prevent timers rescheduling during deletion
comedi: comedi_8255: Correct error in subdevice initialization
misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume
iio: accel: adxl367: fix I2C FIFO data register
iio: accel: adxl367: fix DEVID read after reset
iio: pressure: dlhl60d: Initialize empty DLH bytes
iio: imu: inv_mpu6050: fix frequency setting when chip is off
iio: pressure: Fixes BMP38x and BMP390 SPI support
iio: imu: inv_mpu6050: fix FIFO parsing when empty
mei: Add Meteor Lake support for IVSC device
mei: me: add arrow lake point H DID
mei: me: add arrow lake point S DID
counter: fix privdata alignment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small remaining tty/serial driver fixes. Included in
here is fixes for:
- vt unicode buffer corruption fix
- imx serial driver fixes, again
- port suspend fix
- 8250_dw driver fix
- fsl_lpuart driver fix
- revert for the qcom_geni_serial driver to fix a reported regression
All of these have been in linux-next with no reported issues"
* tag 'tty-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"
tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled
vt: fix unicode buffer corruption when deleting characters
serial: port: Don't suspend if the port is still busy
serial: 8250_dw: Do not reclock if already at correct rate
tty: serial: imx: Fix broken RS485
|
|
Both AER and DPC RP PIO provide TLP Header Log registers (PCIe r6.1 secs
7.8.4 & 7.9.14) to convey error diagnostics but the struct is named after
AER as the struct aer_header_log_regs. Also, not all places that handle TLP
Header Log use the struct and the struct members are named individually.
Generalize the struct name and members, and use it consistently where TLP
Header Log is being handled so that a pcie_read_tlp_log() helper can be
easily added.
Link: https://lore.kernel.org/r/20240206135717.8565-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: drop ixgbe changes for now, tidy whitespace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Use u32 for PCIe AER Capability register variable and name it "aercc"
(Advanced Error Capabilities and Control register, PCIe r6.1 sec 7.8.4.7)
instead of "temp".
Link: https://lore.kernel.org/r/20240206135717.8565-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: make subject more specific and match similar previous patches]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small remaining fixes for USB and Thunderbolt drivers.
Included in here are fixes for:
- thunderbold NULL dereference fix
- typec driver fixes
- xhci driver regression fix
- usb-storage divide-by-0 fix
- ncm gadget driver fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix failure to detect ring expansion need.
usb: port: Don't try to peer unused USB ports based on location
usb: gadget: ncm: Fix handling of zero block length packets
usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group
usb: typec: tpcm: Fix PORT_RESET behavior for self powered devices
usb: typec: ucsi: fix UCSI on SM8550 & SM8650 Qualcomm devices
USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command
thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix the PM suspend callback in the STM32 ST32MP257 driver to properly
support suspend
- Drop an extraneous reference put in the debugfs code, this was
confusing the reference counts and causing unsolicited calls to
__free()
* tag 'pinctrl-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: don't put the reference to GPIO device in pinctrl_pins_show()
pinctrl: stm32: fix PM support for stm32mp257
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a revert of endpoint checks in bcm5974 - the driver is being naughty
and pokes at unclaimed USB interface, so the check fails. We need to
fix the driver to claim both interfaces, and then re-implement the
endpoints check
- a fix to Synaptics RMI driver to avoid UAF on driver unload or device
unbinding
- a few new VID/PIDs added to xpad game controller driver
- a change to gpio_keys_polled driver to quiet it when GPIO causes
probe deferral.
* tag 'input-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - fix UAF of IRQ domain on driver removal
Input: gpio_keys_polled - suppress deferred probe error for gpio
Revert "Input: bcm5974 - check endpoint type before starting traffic"
Input: xpad - add additional HyperX Controller Identifiers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. Half of them are HD-audio quirks while
the rest are various device-specific ASoC fixes"
* tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll
ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode
ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC
ASoC: dt-bindings: nvidia: Fix 'lge' vendor prefix
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook
ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI quirk table
ASoC: rcar: adg: correct TIMSEL setting for SSI9
ALSA: hda: cs35l41: Overwrite CS35L41 configuration for ASUS UM5302LA
ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops
ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P
ALSA: hda/realtek - Add Headset Mic supported Acer NB platform
ALSA: hda: optimize the probe codec process
ALSA: hda/realtek - Fix headset Mic no show at resume back for Lenovo ALC897 platform
ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet
ASoC: madera: Fix typo in madera_set_fll_clks shift value
|
|
With the devm variant of siox_master_allocate() and
siox_master_register() the remove callback can be dropped. This also
simplifies the error paths in the probe function.
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://lore.kernel.org/r/e3c598de536deadc7efef9c21ccb49d31eb240a9.1708328466.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This allows to simplify siox master drivers in the next step.
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://lore.kernel.org/r/e961dfb3e94f106b16f5eacff2110fc7fa0cab13.1708328466.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
This allows to simplify siox master drivers in the next step.
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://lore.kernel.org/r/ad141dd22c7d95ad0bd347f257ce586e1afb22a4.1708328466.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
While it's technically fine to pass the ownership of the reference on
a struct siox_master from the caller of siox_master_register() to the
framework this is hard to use. Instead let the framework take its own
reference (that is freed in siox_master_unregister()) and drop the bus
driver's reference in its remove callback.
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://lore.kernel.org/r/1e8d09d17848e58e8fc6a46278b5e8fb0cf4618a.1708328466.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes (two weeks for i915), scattered across drivers, amdgpu
and i915 being the main ones, with nouveau having a couple of fixes.
One patch got applied for udl, but reverted soon after as the
maintainer has missed some crucial prior discussion.
Seems quiet and normal enough for this stage.
MAINTAINERS
- update email address
core:
- fix polling in certain configurations
buddy:
- fix kunit test warning
panel:
- boe-tv101wum-nl6: timing tuning fixes
i915:
- Fix to extract HDCP information from primary connector
- Check for NULL mmu_interval_notifier before removing
- Fix for #10184: Kernel crash on UHD Graphics 730 (Cc stable)
- Fix for #10284: Boot delay regresion with PSR
- Fix DP connector DSC HW state readout
- Selftest fix to convert msecs to jiffies
xe:
- error path fix
amdgpu:
- SMU14 fix
- Fix possible NULL pointer
- VRR fix
- pwm fix
nouveau:
- fix deadlock in new ioctls fail path
- fix missing locking around object rbtree
udl:
- apply and revert format change"
* tag 'drm-fixes-2024-03-08' of https://gitlab.freedesktop.org/drm/kernel: (21 commits)
nouveau: lock the client object tree.
drm/tests/buddy: fix print format
drm/xe: Return immediately on tile_init failure
drm/amdgpu/pm: Fix the error of pwm1_enable setting
drm/amd/display: handle range offsets in VRR ranges
drm/amd/display: check dc_link before dereferencing
drm/amd/swsmu: modify the gfx activity scaling
Revert "drm/udl: Add ARGB8888 as a format"
drm/i915/panelreplay: Move out psr_init_dpcd() from init_connector()
drm/i915/dp: Fix connector DSC HW state readout
drm/i915/selftests: Fix dependency of some timeouts on HZ
drm/udl: Add ARGB8888 as a format
drm/nouveau: fix stale locked mutex in nouveau_gem_ioctl_pushbuf
drm/i915: Don't explode when the dig port we don't have an AUX CH
MAINTAINERS: Update email address for Tvrtko Ursulin
drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP (again)
drm: Fix output poll work for drm_kms_helper_poll=n
drm/i915: Check before removing mm notifier
drm/i915/hdcp: Extract hdcp structure from correct connector
drm/i915/hdcp: Remove additional timing for reading mst hdcp message
...
|
|
Allow FONT_SUN8x16 when EARLYFB is enabled for sparc64, even when
FRAMEBUFFER_CONSOLE is not to avoid the following warning for this case
WARNING: unmet direct dependencies detected for FONT_SUN8x16
Depends on [n]: FONT_SUPPORT [=y] && (FRAMEBUFFER_CONSOLE [=n] && (FONTS [=n] || SPARC [=y]) || BOOTX_TEXT)
Selected by [y]:
- EARLYFB [=y] && SPARC64 [=y]
by allowing it in the same manner as is done for powerpc in commit
0ebc7feae79a ("powerpc: Use shared font data").
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fixes: 0f1991949d9b ("sparc: Use shared font data")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402241539.epQT43nI-lkp@intel.com/
Cc: "Dr. David Alan Gilbert" <linux@treblig.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240307180742.900068-1-andreas@gaisler.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/59b07175ca590031ee28c11c5941384ab3603799.1709591118.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/a9c6351fc24c40d011697cd7540950f412507965.1709591118.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/0b61ed6fb4ebe2880951b1e849551dbc63402802.1709591118.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/dc10c77a6ababab6ffdb344982e8a04cc337bdc7.1709591118.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/a5ba9d930451d1eeabc4208cc6c75184a92a248d.1709591118.git.u.kleine-koenig@pengutronix.de
|
|
This fixes the following build warning:
drivers/sbus/char/bbc_envctrl.c:566:5: error: no previous prototype for ‘bbc_envctrl_init’ [-Werror=missing-prototypes]
566 | int bbc_envctrl_init(struct bbc_i2c_bus *bp)
| ^~~~~~~~~~~~~~~~
drivers/sbus/char/bbc_envctrl.c:594:6: error: no previous prototype for ‘bbc_envctrl_cleanup’ [-Werror=missing-prototypes]
594 | void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp)
| ^~~~~~~~~~~~~~~~~~~
which in the presence of -Werror=missing-prototypes yields a compiler
error.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/57bc3b43b405431a486162fb8c2558072e976747.1709591118.git.u.kleine-koenig@pengutronix.de
|
|
Passing a datastructre marked _initconst to platform_driver_register()
is wrong. Drop the __initconst notation.
This fixes the following warnings:
WARNING: modpost: vmlinux: section mismatch in reference: grpci1_of_driver+0x30 (section: .data) -> grpci1_of_match (section: .init.rodata)
WARNING: modpost: vmlinux: section mismatch in reference: grpci2_of_driver+0x30 (section: .data) -> grpci2_of_match (section: .init.rodata)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Fixes: 4154bb821f0b ("sparc: leon: grpci1: constify of_device_id")
Fixes: 03949b1cb9f1 ("sparc: leon: grpci2: constify of_device_id")
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240224-sam-fix-sparc32-all-builds-v2-7-1f186603c5c4@ravnborg.org
|
|
include/asm/parport.h is sparc64 specific.
Rename it to parport_64.h and use the generic version for sparc32.
This fixed all{mod,yes}config build errors like:
parport_pc.c:(.text):undefined-reference-to-ebus_dma_enable
parport_pc.c:(.text):undefined-reference-to-ebus_dma_irq_enable
parport_pc.c:(.text):undefined-reference-to-ebus_dma_register
The errors occur as the sparc32 build references sparc64 symbols.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Closes: https://lore.kernel.org/r/20230406160548.25721-1-rdunlap@infradead.org/
Fixes: 66bcd06099bb ("parport_pc: Also enable driver for PCI systems")
Cc: stable@vger.kernel.org # v5.18+
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240224-sam-fix-sparc32-all-builds-v2-6-1f186603c5c4@ravnborg.org
|
|
sparc32 do not support generic isa dma, so do not select the symbol.
This fixes the following warnings:
dma.c:70:5: error: no previous prototype for 'request_dma' [-Werror=missing-prototypes]
dma.c:88:6: error: no previous prototype for 'free_dma' [-Werror=missing-prototypes]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 0fcb70851fbf ("Makefile.extrawarn: turn on missing-prototypes globally")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240224-sam-fix-sparc32-all-builds-v2-5-1f186603c5c4@ravnborg.org
|
|
This fixes the following warning:
sun_uflash.c:50:5: error: no previous prototype for 'uflash_devinit'
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 0fcb70851fbf ("Makefile.extrawarn: turn on missing-prototypes globally")
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240224-sam-fix-sparc32-all-builds-v2-3-1f186603c5c4@ravnborg.org
|
|
Fix the following build errors:
irq_32.c:258:7: error: array subscript [16, 79] is outside array bounds of 'struct tt_entry[1]
irq_32.c:271:14: error: assignment to 'struct tt_entry *' from incompatible pointer type 'struct tt_entry (*)[]
trapbase is a pointer to an array of tt_entry, but the code declared it
as a pointer so the compiler see a single entry and not an array.
Fix this by modifyinf the declaration to be an array, and modify all
users to take the address of the first member.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240224-sam-fix-sparc32-all-builds-v2-2-1f186603c5c4@ravnborg.org
|
|
Use the generic variants - the implementation is the same.
As a nice side-effect fix the following warnings:
cmpdi2.c: warning: no previous prototype for '__cmpdi2' [-Wmissing-prototypes]
ucmpdi2.c: warning: no previous prototype for '__ucmpdi2' [-Wmissing-prototypes]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 0fcb70851fbf ("Makefile.extrawarn: turn on missing-prototypes globally")
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> # build-tested
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240224-sam-fix-sparc32-all-builds-v2-1-1f186603c5c4@ravnborg.org
|
|
There is no point cloning an skb and having to free the clone
if the receive queue of the raw socket is full.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240307163020.2524409-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no point cloning an skb and having to free the clone
if the receive queue of the raw socket is full.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240307162943.2523817-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The only error that can happen during a nexthop dump is insufficient
space in the skb caring the netlink messages (EMSGSIZE). If this happens
and some messages were already filled in, the nexthop code returns the
skb length to signal the netlink core that more objects need to be
dumped.
After commit b5a899154aa9 ("netlink: handle EMSGSIZE errors in the
core") there is no need to handle this error in the nexthop code as it
is now handled in the core.
Simplify the code and simply return the error to the core.
No regressions in nexthop tests:
# ./fib_nexthops.sh
Tests passed: 234
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240307154727.3555462-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to skb_unref(), add skb_data_unref() to save an expensive
atomic operation (and cache line dirtying) when last reference
on shinfo->dataref is released.
I saw this opportunity on hosts with RAW sockets accidentally
bound to UDP protocol, forcing an skb_clone() on all received packets.
These RAW sockets had their receive queue full, so all clone
packets were immediately dropped.
When UDP recvmsg() consumes later the original skb, skb_release_data()
is hitting atomic_sub_return() quite badly, because skb->clone
has been set permanently.
Note that this patch helps TCP TX performance, because
TCP stack also use (fast) clones.
This means that at least one of the two packets (the main skb or
its clone) will no longer have to perform this atomic operation
in skb_release_data().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240307123446.2302230-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-06 (igc, igb, ice)
This series contains updates to igc, igb, and ice drivers.
Vinicius removes double clearing of interrupt register which could cause
timestamp events to be missed on igc and igb.
Przemek corrects calculation of statistics which caused incorrect spikes
in reporting for ice driver.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix stats being updated by way too large values
igb: Fix missing time sync events
igc: Fix missing time sync events
====================
Link: https://lore.kernel.org/r/20240306182617.625932-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a KUnit test that confirms a DTB has been loaded, i.e. there is a
root node, and that the of_have_populated_dt() API works properly. We
skip the test when CONFIG_OF_EARLY_FLATREE=n because in that case we
know architecture code hasn't called unflatten_(and_copy_)?device_tree()
which would populate some sort of root node.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-8-sboyd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
unflatten_device_tree() now ensures that the 'of_root' node is populated
with the root of a default empty devicetree. Remove the unittest code
that created 'of_root' if it was missing. Verify that 'of_root' is valid
before attempting to attach the testcase-data subtree. Remove the
unittest code that unflattens the unittest overlay base if architecture
is UML because that is always done now.
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230317053415.2254616-3-frowand.list@gmail.com
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-7-sboyd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Call this function unconditionally so that we can populate an empty DTB
on platforms that don't boot with a firmware provided or builtin DTB.
There's no harm in calling unflatten_device_tree() unconditionally here.
If there isn't a non-NULL 'initial_boot_params' pointer then
unflatten_device_tree() returns early.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-5-sboyd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Call this function unconditionally so that we can populate an empty DTB
on platforms that don't boot with a command line provided DTB. There's
no harm in calling unflatten_device_tree() unconditionally. If there
isn't a valid initial_boot_params dtb then unflatten_device_tree()
returns early.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-4-sboyd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When enabling CONFIG_OF on a platform where 'of_root' is not populated
by firmware, we end up without a root node. In order to apply overlays
and create subnodes of the root node, we need one. Create this root node
by unflattening an empty builtin dtb.
If firmware provides a flattened device tree (FDT) then the FDT is
unflattened via setup_arch(). Otherwise, the call to
unflatten(_and_copy)?_device_tree() will create an empty root node.
We make of_have_populated_dt() return true only if the DTB was loaded by
firmware so that existing callers don't change behavior after this
patch. The call in the of platform code is removed because it prevents
overlays from creating platform devices when the empty root node is
used.
[sboyd@kernel.org: Update of_have_populated_dt() to treat this empty dtb
as not populated. Drop setup_of() initcall]
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230317053415.2254616-2-frowand.list@gmail.com
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-3-sboyd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
We want to populate an empty DT whenever CONFIG_OF is enabled so that
overlays can be applied and the DT unit tests can be run. Make
unflatten_and_copy_device_tree() stop printing a warning if the
'initial_boot_params' pointer is NULL. Instead, simply copy the dtb if
there is one and then unflatten it. If there isn't a DT to copy, then
the call to unflatten_device_tree() is largely a no-op, so nothing
really changes here.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240217010557.2381548-2-sboyd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Instead of creating a hard error and aborting the sandbox creation,
accept file path not usable in the LL_FS_RO and LL_FS_RW environment
variables but only print a warning. This makes it easier to test, for
instance with LL_FS_RO="${PATH}:/usr/lib:/lib"
Print that we are going to execute the command in the sandbox before
doing so.
Rename "launch" to "execute", and improve header description.
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240307143849.1517218-1-mic@digikod.net
[mic: Improve header description as suggested by Günther]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Use landlock_cred(file->f_cred)->domain instead of
landlock_get_current_domain() in security_file_open() hook
implementation.
This should not change the current behavior but could avoid potential
race conditions in case of current task's credentials change.
This will also ensure consistency with upcoming audit support relying on
file->f_cred.
Add and use a new get_fs_domain() helper to mask non-filesystem domains.
file->f_cred is set by path_openat()/alloc_empty_file()/init_file() just
before calling security_file_alloc().
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240307095203.1467189-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
ptrace.[ch] are currently only used for the ptrace LSM hooks but their
scope will expand with IPCs and audit support. Rename ptrace.[ch] to
task.[ch], which better reflect their content. Similarly, rename
landlock_add_ptrace_hooks() to landlock_add_task_hooks(). Keep header
files for now.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240307093923.1466071-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Remove the handled_access variable in current_check_access_socket() and
update access_request instead. One up-to-date variable avoids picking
the wrong one.
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20240307093923.1466071-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The fourth "new features" pull request for v6.9 with changes both in
stack and in drivers. The theme in this pull request is to fix sparse
warnings but we still have some left in wireless subsystem. Otherwise
quite normal.
Major changes:
rtw89
* NL80211_EXT_FEATURE_SCAN_RANDOM_SN support
* NL80211_EXT_FEATURE_SET_SCAN_DWELL support
rtw88
* support for more rtw8811cu and rtw8821cu devices
mt76
* mt76x2u: add Netgear WNDA3100v3 USB
* mt7915: newer ADIE version support
* mt7925: radio temperature sensor support
* mt7996: remove GCMP IGTK offload
* tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits)
wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode
wifi: rtw89: wow: set security engine options for 802.11ax chips only
wifi: rtw89: update suspend/resume for different generation
wifi: rtw89: wow: update config mac function with different generation
wifi: rtw89: update DMA function with different generation
wifi: rtw89: wow: update WoWLAN status register for different generation
wifi: rtw89: wow: update WoWLAN reason register for different chips
wifi: brcm80211: handle pmk_op allocation failure
wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR
wifi: rtw89: coex: When Bluetooth not available don't set power/gain
wifi: rtw89: coex: add return value to ensure H2C command is success or not
wifi: rtw89: coex: Reorder H2C command index to align with firmware
wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic
wifi: rtw89: coex: add init_info H2C command format version 7
wifi: rtw89: 8922a: add coexistence helpers of SW grant
wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt
wifi: cw1200: restore endian swapping
wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns
wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte
wifi: rtw88: 8821c: Fix false alarm count
...
====================
Link: https://lore.kernel.org/r/20240308100429.B8EA2C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
