summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-09mptcp: use adding up size to get ADD_ADDR lengthGeliang Tang
This patch uses adding up size to get the ADD_ADDR suboption length rather than returning the ADD_ADDR size constants. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09mptcp: add port support for ADD_ADDR suboption writingGeliang Tang
In rfc8684, the length of ADD_ADDR suboption with IPv4 address and port is 18 octets, but mptcp_write_options is 32-bit aligned, so we need to pad it to 20 octets. All the other port related option lengths need to be added up 2 octets similarly. This patch added a new field 'port' in mptcp_out_options. When this field is set with a port number, we need to add up 4 octets for the ADD_ADDR suboption, and put the port number into the suboption. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09mptcp: unify ADD_ADDR and ADD_ADDR6 suboptions writingGeliang Tang
The length of ADD_ADDR6 is 12 octets longer than ADD_ADDR. That's the only difference between them. This patch dropped the duplicate code between ADD_ADDR and ADD_ADDR6 suboptions writing, and unify them into one. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09mptcp: unify ADD_ADDR and echo suboptions writingGeliang Tang
There are two differences between ADD_ADDR suboption and ADD_ADDR echo suboption: The length of the former is 8 octets longer than the length of the latter. The former's echo-flag is 0, and latter's echo-flag is 1. This patch added two local variables, len and echo, to unify ADD_ADDR and ADD_ADDR echo suboptions writing. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Switch to RCU in x_tables to fix possible NULL pointer dereference, from Subash Abhinov Kasiviswanathan. 2) Fix netlink dump of dynset timeouts later than 23 days. 3) Add comment for the indirect serialization of the nft commit mutex with rtnl_mutex. 4) Remove bogus check for confirmed conntrack when matching on the conntrack ID, from Brett Mastbergen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-12-09 This series contains updates to ice driver only. Bruce changes the allocation of ice_flow_prof_params from stack to heap to avoid excessive stack usage. Corrects a misleading comment and silences a sparse warning that is not a problem. Paul allows for HW initialization to continue if PHY abilities cannot be obtained. Jeb removes bypassing FW link override and reading Option ROM and netlist information for non-E810 devices as this is now available on other devices. Nick removes vlan_ena field as this information can be gathered by checking num_vlan. Jake combines format strings and debug prints to the same line. Simon adds a space to fix string concatenation. v4: Drop ACL patches. Change PHY abilities failure message from debug to warning. v3: Fix email address for DaveM and fix character in cover letter v2: Expand on commit message for patch 3 to show example usage/commands. Reduce number of defensive checks being done. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-12-09 This series contains updates to igb, ixgbe, i40e, and ice drivers. Sven Auhagen fixes issues with igb XDP: return correct error value in XDP xmit back, increase header padding to include space for double VLAN, add an extack error when Rx buffer is too small for frame size, set metasize if it is set in xdp, change xdp_do_flush_map to xdp_do_flush, and update trans_start to avoid possible Tx timeout. Björn fixes an issue where an Rx buffer can be reused prematurely with XDP redirect for ixgbe, i40e, and ice drivers. The following are changes since commit 323a391a220c4a234cb1e678689d7f4c3b73f863: can: isotp: isotp_setsockopt(): block setsockopt on bound sockets and are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue 1GbE ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09Input: cyapa - switch to using devm_add_action_or_reset()Fuqian Huang
devm_add_action_or_reset() is introduced as a helper function which internally calls devm_add_action(). If devm_add_action() fails then it will execute the action mentioned and return the error code. This reduce source code size (avoid writing the action twice) and reduce the likelyhood of bugs. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/linux-input/20190708123323.11943-1-huangfq.daxian@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: cros_ec_keyb - send 'scancodes' in addition to key eventsDmitry Torokhov
To let userspace know what 'scancodes' should be used in EVIOCGKEYCODE and EVIOCSKEYCODE ioctls, we should send EV_MSC/MSC_SCAN events in addition to EV_KEY/KEY_* events. The driver already declared MSC_SCAN capability, so it is only matter of actually sending the events. Link: https://lore.kernel.org/r/X87aOaSptPTvZ3nZ@google.com Acked-by: Rajat Jain <rajatja@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: add driver for power button on Dell Wyse 3020Lubomir Rintel
This adds support for the power button attached to the Embedded Controller on a Dell Wyse 3020 "Ariel" board. The Embedded Controller's SPI interface is actually capable sending and receiving the PS/2 keyboard and mouse protocol data, which looks like a good fit for a serio driver. Howerver, I don't know of any machines where this is actually used. My board only has a single power button and no way to connect an actual keyboard or a mouse. Using the atkbd driver with serio would be an overkill and would be inconvenient for the userspace. Therefore this driver registers an input device that is only capable of reporting the power button presses and releases. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20201201083533.1724287-3-lkundrak@v3.sk Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09dt-bindings: input: Add Dell Wyse 3020 Power Button bindingLubomir Rintel
Add binding document for the Dell Wyse 3020 a.k.a. "Ariel" Power Button. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201201083533.1724287-2-lkundrak@v3.sk Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09Input: gtco - remove driverDmitry Torokhov
The driver has its own HID descriptor parsing code, that had and still has several issues discovered by syzbot and other tools. Ideally we should move the driver over to the HID subsystem, so that it uses proven parsing code. However the devices in question are EOL, and GTCO is not willing to extend resources for that, so let's simply remove the driver. Note that our HID support has greatly improved over the last 10 years, we may also consider reverting 6f8d9e26e7de ("hid-core.c: Adds all GTCO CalComp Digitizers and InterWrite School Products to blacklist") and see if GTCO devices actually work with normal HID drivers. Link: https://lore.kernel.org/r/X8wbBtO5KidME17K@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-09net: marvell: octeontx2: simplify the otx2_ptp_adjfine()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: dsa: simplify the return rtl8366_vlan_prepare()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: stmmac: simplify the return dwmac5_rxp_disable()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: hinic: simplify the return hinic_configure_max_qnum()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: freescale: dpaa: simplify the return dpaa_eth_refill_bpools()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: cisco: enic: simplify the return vnic_cq_alloc()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: emulex: benet: simplify the return expression of be_if_create()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: marvell: octeontx2: simplify the return expression of rvu_npa_init()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: marvell: prestera: simplify the return expression of prestera_port_close()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09Merge branch 'nfc-s3fwrn5-Change-I2C-interrupt-trigger-to-EDGE_RISING'David S. Miller
Bongsu Jeon says: ==================== nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING For stable Samsung's I2C interrupt handling, I changed the interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed the hard coded interrupt trigger type in the i2c module for the flexible control. 1/2 is the changed dt binding for the edge rising trigger. 2/2 is to remove the hard coded interrupt trigger type in the i2c module. ChangeLog: v2: 2/2 - remove the hard coded interrupt trigger type. Bongsu Jeon (2): dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c module ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c moduleBongsu Jeon
For the flexible control of interrupt trigger type, remove the hard coded interrupt trigger type in the i2c module. The trigger type will be loaded from a dts. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger typeBongsu Jeon
Change interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING for stable NFC I2C interrupt handling. Samsung's NFC Firmware sends an i2c frame as below. 1. NFC Firmware sets the GPIO(interrupt pin) high when there is an i2c frame to send. 2. If the CPU's I2C master has received the i2c frame, NFC F/W sets the GPIO low. NFC driver's i2c interrupt handler would be called in the abnormal case as the NFC FW task of number 2 is delayed because of other high priority tasks. In that case, NFC driver will try to receive the i2c frame but there isn't any i2c frame to send in NFC. It would cause an I2C communication problem. This case would hardly happen. But, I changed the interrupt as a defense code. If Driver uses the TRIGGER_RISING instead of the LEVEL trigger, there would be no problem even if the NFC FW task is delayed. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10usb: chipidea: trace: fix the endian issuePeter Chen
"sparse warnings: (new ones prefixed by >>)" drivers/usb/chipidea/trace.c: note: in included file (through include/trace/trace_events.h, include/trace/define_trace.h, drivers/usb/chipidea/trace.h): >> drivers/usb/chipidea/./trace.h:39:1: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] next @@ got restricted __le32 [usertype] next @@ >> drivers/usb/chipidea/./trace.h:39:1: sparse: expected unsigned int [usertype] next >> drivers/usb/chipidea/./trace.h:39:1: sparse: got restricted __le32 [usertype] next >> drivers/usb/chipidea/./trace.h:39:1: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] token @@ got restricted __le32 [usertype] token @@ >> drivers/usb/chipidea/./trace.h:39:1: sparse: expected unsigned int [usertype] token >> drivers/usb/chipidea/./trace.h:39:1: sparse: got restricted __le32 [usertype] token drivers/usb/chipidea/trace.c: note: in included file (through include/trace/perf.h, include/trace/define_trace.h, drivers/usb/chipidea/trace.h): >> drivers/usb/chipidea/./trace.h:39:1: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] next @@ got restricted __le32 [usertype] next @@ >> drivers/usb/chipidea/./trace.h:39:1: sparse: expected unsigned int [usertype] next >> drivers/usb/chipidea/./trace.h:39:1: sparse: got restricted __le32 [usertype] next >> drivers/usb/chipidea/./trace.h:39:1: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] token @@ got restricted __le32 [usertype] token @@ >> drivers/usb/chipidea/./trace.h:39:1: sparse: expected unsigned int [usertype] token >> drivers/usb/chipidea/./trace.h:39:1: sparse: got restricted __le32 [usertype] token Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-10usb: chipidea: add tracepoint support for udcPeter Chen
Add basic tracepoint support for udc driver. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-10doc: dt-binding: cdns,usb3: add wakeup-irqPeter Chen
To support low power mode for controller, the driver needs wakeup-irq to reflect the signal changing after controller is stopped, and waking the controller up accordingly. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-10usb: cdns3: imx: enable runtime pm by defaultPeter Chen
Enable runtime pm by default Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-10usb: cdns3: add quirk for enable runtime pm by defaultPeter Chen
Some vendors (eg: NXP) may want to enable runtime pm by default for power saving, add one quirk for it. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-10usb: cdns3: host: disable BEI supportPeter Chen
The Cadence xHCI doesn't support BEI well, it causes the disconnection of ISOC devices can't be detected, so we disable it. Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-10usb: cdns3: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INITPeter Chen
cdns3 manages PHY by own DRD driver, so skip the management by HCD core. Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-10usb: cdns3: host: add .suspend_quirk for xhci-plat.cPeter Chen
cdns3 has some special PM sequence between xhci_bus_suspend and xhci_suspend, add quirk to implement it. Reviewed-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-10usb: cdns3: Rids of duplicate error messagePawel Laszczak
On failure, the platform_get_irq_byname prints an error message, so patch removes error message related to this function from core.c file. A change was suggested during reviewing CDNSP driver by Chunfeng Yun. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-10usb: cdns3: Add static to cdns3_gadget_exit functionPawel Laszczak
Function cdns3_gadget_exit is used only in gadget.c file. This patch removes declaration and definition of this function from gadget-export.h file and makes it static. Signed-off-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-12-09Merge branch 'mlx4_en-fixes'David S. Miller
Tariq Toukan says: ==================== mlx4_en fixes This patchset by Moshe contains fixes to the mlx4 Eth driver, addressing issues in restart flow. Patch 1 protects the restart task from being rescheduled while active. Please queue for -stable >= v2.6. Patch 2 reconstructs SQs stuck in error state, and adds prints for improved debuggability. Please queue for -stable >= v3.12. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net/mlx4_en: Handle TX error CQEMoshe Shemesh
In case error CQE was found while polling TX CQ, the QP is in error state and all posted WQEs will generate error CQEs without any data transmitted. Fix it by reopening the channels, via same method used for TX timeout handling. In addition add some more info on error CQE and WQE for debug. Fixes: bd2f631d7c60 ("net/mlx4_en: Notify user when TX ring in error state") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net/mlx4_en: Avoid scheduling restart task if it is already runningMoshe Shemesh
Add restarting state flag to avoid scheduling another restart task while such task is already running. Change task name from watchdog_task to restart_task to better fit the task role. Fixes: 1e338db56e5a ("mlx4_en: Fix a race at restart task") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09docs: update requirements to install six moduleJaeSang Yoo
On the update of Sphinx version to 2.4.4, the "six" library won't be installed automatically. (which is required by kfigure.py) Main reason of this issue were occurred by the requirements changed from the sphinx library. In Sphinx v1.7.9, six was listed on the install_requires, but it has been removed since 2.x The kfigure.py uses six library explicitly, adding six to requirements.txt seems reasonable Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20201208014628.GA1361@JSYoo5B-Base.localdomain Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-12-09docs: reporting-issues: move 'outdated, need help' note to proper placeThorsten Leemhuis
Move the 'this section is a placeholder for now and needs help by someone with domain knowledge' note one section upwards to the place where it belongs: the 'Decode failure messages' section. Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Link: https://lore.kernel.org/r/d3894ba4a302beed661304cbcdc062c6dcfe3e58.1607489877.git.linux@leemhuis.info Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-12-09net: ipa: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: mv88e6xxx: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: thunderbolt: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: usb: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: freescale: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: ethernet: ti: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09hisilicon/hns3: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09hisilicon/hns: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: mlx5: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: micrel: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09net: rxrpc: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 19:31:52 +0000