summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-24mmc: sdhci-cadence: add HS400 enhanced strobe supportPiotr Sroka
Add support for HS400ES mode to Cadence SDHCI driver. Signed-off-by: Piotr Sroka <piotrs@cadence.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: tegra: Add Tegra186 supportThierry Reding
The SDHCI controller found on NVIDIA Tegra186 SoCs is very similar to the one on prior generations of Tegra and can be supported by the same driver. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: tegra: Support module resetThierry Reding
The device tree binding for the SDHCI controller found on Tegra SoCs specifies that a reset control can be provided by the device tree. No code was ever added to support the module reset, which can cause the driver to try and access registers from a module that's in reset. On most Tegra SoC generations doing so would cause a hang. Note that it's unlikely to see this happen because on most platforms these resets will have been deasserted by the bootloader. However the portability can be improved by making sure the driver deasserts the reset before accessing any registers. Since resets are synchronous on Tegra SoCs, the platform driver needs to implement a custom ->remove() callback now to make sure the clock is disabled after the reset is asserted. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: remove mmc host on device removalMichał Zegan
The mmc host was added in meson_mmc_probe, but never removed in meson_mmc_remove. Fix that by removing the host before deallocating other resources. Signed-off-by: Michał Zegan <webczat@webczatnet.pl> Tested-by: Michał Zegan <webczat@webczatnet.pl> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: host: tmio: fill in response from auto cmd12Wolfram Sang
After we received the dataend interrupt, R1 response register carries the value from the automatically generated stop command. Report that info back to the MMC block layer, so we will be notified in case of e.g. ECC errors which happened during the last transfer. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: host: tmio: don't BUG on unsupported stop commandsWolfram Sang
Halting the kernel on an unsupported stop command seems overkill, report the error and say what we already did (due to autocmd12) instead. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: host: tmio: fix minor typos in commentsWolfram Sang
Making sure we match the actual register names. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: host: tmio: use defines for CTL_STOP_INTERNAL_ACTION valuesWolfram Sang
Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: tmio: ensure end of DMA and SD access are in syncWolfram Sang
The current code assumes that DMA is finished before SD access end is flagged. Thus, it schedules the 'dma_complete' tasklet in the SD card interrupt routine when DATAEND is set. The assumption is not safe, though. Even by mounting an SD card, it can be seen that sometimes DMA complete is first, sometimes DATAEND. It seems they are usually close enough timewise to not cause problems. However, a customer reported that with CMD53 sometimes things really break apart. As a result, the BSP has a patch which introduces flags for both events and makes sure both flags are set before scheduling the tasklet. The customer accepted the patch, yet it doesn't seem a proper upstream solution to me. This patch refactors the code to replace the tasklet with already existing and more lightweight mechanisms. First of all, we set the callback in a DMA descriptor to automatically get notified when DMA is done. In the callback, we then use a completion to make sure the SD access has already ended. Then, we proceed as before. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: sdhci-pxav2: add error handling of clk_prepare_enable()Alexey Khoroshilov
There is no check if clk_prepare_enable() succeed in sdhci_pxav2_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: replace magic timeout numbers with constantsHeiner Kallweit
Replace timeout magic numbers with proper constants. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: remove member mrq from struct meson_hostHeiner Kallweit
Struct mmc_command includes a reference to the related mmc_request. Therefore we don't have to store mrq separately in struct meson_host. And we can remove some now unneeded WARN_ON's. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: improve initial configurationHeiner Kallweit
Config values which are not changed during runtime we can set in the probe function already. The block size setting is overwritten later in meson_mmc_start_cmd anyway if needed, so it doesn't harm if we remove this setting in meson_mmc_set_ios. In addition write config register only if configuration changed. Don't change the location of clock initialization as in an earlier version of the patch, this change causes a hang. This issue was reported and fix suggested by: Helmut Klein <hgkr.klein@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_initHeiner Kallweit
CLK core does a deep copy of init.name, therefore it's fully ok to provide a local variable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probeHeiner Kallweit
The condition should be "if (ret)" as the disable/unprepare is supposed to be executed if the previous command fails. In addition adjust the error path in probe to properly deal with the case that cfg_div_clk can be registered successfully but enable/prepare fails. In this case we shouldn't call clk_disable_unprepare. Reported-by: Michał Zegan <webczat_200@poczta.onet.pl> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: remove member parent_mux from struct meson_hostHeiner Kallweit
Member mux_parent isn't used outside meson_mmc_clk_init. So remove it and replace it with a local variable in meson_mmc_clk_init. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: remove unneeded variable in meson_mmc_clk_initHeiner Kallweit
Because the DT requires a fixed number of mux parent clocks, variable mux_parent_count can be replaced with constant MUX_CLK_NUM_PARENTS, so remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_hostHeiner Kallweit
Member ocr_mask is never used and member irq we can replace with a local variable in meson_mmc_probe. So let's remove both members. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: make two functions return voidHeiner Kallweit
The return value of meson_mmc_request_done and meson_mmc_read_resp isn't used, so make both functions return void. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmdHeiner Kallweit
Core ensures that there are no commands with cmd->data being set and nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM because cmd_cfg was zero-initialized and this bit isn't set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: dw_mmc: improve dw_mci_reset a bitShawn Lin
Too much condition iteration makes the code less readable. Slightly improve it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: dw_mmc: move mci_send_cmd forward to avoid declarationShawn Lin
No functional change intended. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: dw_mmc: remove declaration of dw_mci_card_busyShawn Lin
No need to declar it there, remove it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: dw_mmc: move dw_mci_get_cd forward to avoid declarationShawn Lin
No functional change intended. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: dw_mmc: move dw_mci_ctrl_reset forward to avoid declarationShawn Lin
No functional change intended. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: dw_mmc: move dw_mci_reset forward to avoid declarationShawn Lin
No functional change intended. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: dw_mmc: improve the timeout polling codeShawn Lin
Just use the readl_poll_timeout{_atomic} to avold open coding them. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24Merge branch 'nfp-dma-adjust_head-fixes'David S. Miller
Jakub Kicinski says: ==================== nfp: DMA flags, adjust head and fixes This series takes advantage of Alex's DMA_ATTR_SKIP_CPU_SYNC to make XDP packet modifications "correct" from DMA API point of view. It also allows us to parse the metadata before we run XDP at no additional DMA sync cost. That way we can get rid of the metadata memcpy, and remove the last upstream user of bpf_prog->xdp_adjust_head. David's patch adds a way to read capabilities from the management firmware. There are also two net-next fixes. Patch 4 which fixes what seems to be a result of a botched rebase on my part. Patch 5 corrects locking when state of ethernet ports is being refreshed. v3: move the sync from alloc func to the actual give to hw func v2: sync rx buffers before giving them to the card (Alex) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24nfp: remove the refresh of all ports optimizationJakub Kicinski
The code refreshing the eth port state was trying to update state of all ports of the card. Unfortunately to safely walk the port list we would have to hold the port lock, which we can't due to lock ordering constraints against rtnl. Make the per-port sync refresh and async refresh of all ports completely separate routines. Fixes: 172f638c93dd ("nfp: add port state refresh") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24nfp: fix free list buffer size reportingJakub Kicinski
XDP headroom should not be included in free list buffer size. Fixes: 6fe0c3b43804 ("nfp: add support for xdp_adjust_head()") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24nfp: add NSP routine to get static informationDavid Brunecz
Retrieve identifying information from the NSP. For now it only contains versions of firmware subcomponents. Signed-off-by: David Brunecz <david.brunecz@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24nfp: parse metadata prepend before XDP runsJakub Kicinski
Calling memcpy to shift metadata out of the way for XDP to run seems like an overkill. The most common metadata contents are 8 bytes containing type and flow hash. Simply parse the metadata before we run XDP. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24nfp: make use of the DMA_ATTR_SKIP_CPU_SYNC attrJakub Kicinski
DMA unmap may destroy changes CPU made to the buffer. To make XDP run correctly on non-x86 platforms we should use the DMA_ATTR_SKIP_CPU_SYNC attribute. Thanks to using the attribute we can now push the sync operation to the common code path from XDP handler. A little bit of variable name reshuffling is required to bring the code back to readable state. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24Merge branch 'cls_flower-MPLS'David S. Miller
Benjamin LaHaise says: ==================== flower: add MPLS matching support This patch series adds support for parsing MPLS flows in the flow dissector and the flower classifier. Each of the MPLS TTL, BOS, TC and Label fields can be used for matching. v2: incorporate style feedback, move #defines to linux/include/mpls.h Note: this omits Jiri's request to remove tabs between the type and field names in struct declarations. This would be inconsistent with numerous other struct definitions. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24cls_flower: add support for matching MPLS fields (v2)Benjamin LaHaise
Add support to the tc flower classifier to match based on fields in MPLS labels (TTL, Bottom of Stack, TC field, Label). Signed-off-by: Benjamin LaHaise <benjamin.lahaise@netronome.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Simon Horman <simon.horman@netronome.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hadar Hen Zion <hadarh@mellanox.com> Cc: Gao Feng <fgao@ikuai8.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24flow_dissector: add mpls support (v2)Benjamin LaHaise
Add support for parsing MPLS flows to the flow dissector in preparation for adding MPLS match support to cls_flower. Signed-off-by: Benjamin LaHaise <benjamin.lahaise@netronome.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Simon Horman <simon.horman@netronome.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Eric Dumazet <jhs@mojatatu.com> Cc: Hadar Hen Zion <hadarh@mellanox.com> Cc: Gao Feng <fgao@ikuai8.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24Merge branch 'tcp-fastopen-middlebox-fixes'David S. Miller
Wei Wang says: ==================== net/tcp_fastopen: Fix for various TFO firewall issues Currently there are still some firewall issues in the middlebox which make the middlebox drop packets silently for TFO sockets. This kind of issue is hard to be detected by the end client. This patch series tries to detect such issues in the kernel and disable TFO temporarily. More details about the issues and the fixes are included in the following patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net/tcp_fastopen: Remove mss check in tcp_write_timeout()Wei Wang
Christoph Paasch from Apple found another firewall issue for TFO: After successful 3WHS using TFO, server and client starts to exchange data. Afterwards, a 10s idle time occurs on this connection. After that, firewall starts to drop every packet on this connection. The fix for this issue is to extend existing firewall blackhole detection logic in tcp_write_timeout() by removing the mss check. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net/tcp_fastopen: Add snmp counter for blackhole detectionWei Wang
This counter records the number of times the firewall blackhole issue is detected and active TFO is disabled. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net/tcp_fastopen: Disable active side TFO in certain scenariosWei Wang
Middlebox firewall issues can potentially cause server's data being blackholed after a successful 3WHS using TFO. Following are the related reports from Apple: https://www.nanog.org/sites/default/files/Paasch_Network_Support.pdf Slide 31 identifies an issue where the client ACK to the server's data sent during a TFO'd handshake is dropped. C ---> syn-data ---> S C <--- syn/ack ----- S C (accept & write) C <---- data ------- S C ----- ACK -> X S [retry and timeout] https://www.ietf.org/proceedings/94/slides/slides-94-tcpm-13.pdf Slide 5 shows a similar situation that the server's data gets dropped after 3WHS. C ---- syn-data ---> S C <--- syn/ack ----- S C ---- ack --------> S S (accept & write) C? X <- data ------ S [retry and timeout] This is the worst failure b/c the client can not detect such behavior to mitigate the situation (such as disabling TFO). Failing to proceed, the application (e.g., SSL library) may simply timeout and retry with TFO again, and the process repeats indefinitely. The proposed solution is to disable active TFO globally under the following circumstances: 1. client side TFO socket detects out of order FIN 2. client side TFO socket receives out of order RST We disable active side TFO globally for 1hr at first. Then if it happens again, we disable it for 2h, then 4h, 8h, ... And we reset the timeout to 1hr if a client side TFO sockets not opened on loopback has successfully received data segs from server. And we examine this condition during close(). The rational behind it is that when such firewall issue happens, application running on the client should eventually close the socket as it is not able to get the data it is expecting. Or application running on the server should close the socket as it is not able to receive any response from client. In both cases, out of order FIN or RST will get received on the client given that the firewall will not block them as no data are in those frames. And we want to disable active TFO globally as it helps if the middle box is very close to the client and most of the connections are likely to fail. Also, add a debug sysctl: tcp_fastopen_blackhole_detect_timeout_sec: the initial timeout to use when firewall blackhole issue happens. This can be set and read. When setting it to 0, it means to disable the active disable logic. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24Merge tag 'mlx5-updates-2017-04-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2017-04-22 Sparse and compiler warnings fixes from Stephen Hemminger. From Roi Dayan and Or Gerlitz, Add devlink and mlx5 support for controlling E-Switch encapsulation mode, this knob will enable HW support for applying encapsulation/decapsulation to VF traffic as part of SRIOV e-switch offloading. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: add rcu locking when changing early demuxDavid Ahern
systemd-sysctl is triggering a suspicious RCU usage message when net.ipv4.tcp_early_demux or net.ipv4.udp_early_demux is changed via a sysctl config file: [ 33.896184] =============================== [ 33.899558] [ ERR: suspicious RCU usage. ] [ 33.900624] 4.11.0-rc7+ #104 Not tainted [ 33.901698] ------------------------------- [ 33.903059] /home/dsa/kernel-2.git/net/ipv4/sysctl_net_ipv4.c:305 suspicious rcu_dereference_check() usage! [ 33.905724] other info that might help us debug this: [ 33.907656] rcu_scheduler_active = 2, debug_locks = 0 [ 33.909288] 1 lock held by systemd-sysctl/143: [ 33.910373] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff8123a370>] file_start_write+0x45/0x48 [ 33.912407] stack backtrace: [ 33.914018] CPU: 0 PID: 143 Comm: systemd-sysctl Not tainted 4.11.0-rc7+ #104 [ 33.915631] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 33.917870] Call Trace: [ 33.918431] dump_stack+0x81/0xb6 [ 33.919241] lockdep_rcu_suspicious+0x10f/0x118 [ 33.920263] proc_configure_early_demux+0x65/0x10a [ 33.921391] proc_udp_early_demux+0x3a/0x41 add rcu locking to proc_configure_early_demux. Fixes: dddb64bcb3461 ("net: Add sysctl to toggle early demux for tcp and udp") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: ipv6: send unsolicited NA if enabled for all interfacesDavid Ahern
When arp_notify is set to 1 for either a specific interface or for 'all' interfaces, gratuitous arp requests are sent. Since ndisc_notify is the ipv6 equivalent to arp_notify, it should follow the same semantics. Commit 4a6e3c5def13 ("net: ipv6: send unsolicited NA on admin up") sends the NA on admin up. The final piece is checking devconf_all->ndisc_notify in addition to the per device setting. Add it. Fixes: 5cb04436eef6 ("ipv6: add knob to send unsolicited ND on link-layer address change") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-04-22 Here are some more Bluetooth patches (and one 802.15.4 patch) in the bluetooth-next tree targeting the 4.12 kernel. Most of them are pure fixes. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: netcp: fix spelling mistake: "memomry" -> "memory"Colin Ian King
Trivial fix to spelling mistake in dev_err message and rejoin line. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24ravb: Double free on error in ravb_start_xmit()Dan Carpenter
If skb_put_padto() fails then it frees the skb. I shifted that code up a bit to make my error handling a little simpler. Fixes: a0d2f20650e8 ("Renesas Ethernet AVB PTP clock driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: atheros: atl1: use offset_in_page() macroGeliang Tang
Use offset_in_page() macro instead of open-coding. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24Merge branch 'bnxt_en-misc-next'David S. Miller
Michael Chan says: ==================== bnxt_en: Updates for net-next. Miscellaneous updates include passing DCBX RoCE VLAN priority to firmware, checking one more new firmware flag before allowing DCBX to run on the host, adding 100Gbps speed support, adding check to disallow speed settings on Multi-host NICs, and a minor fix for reporting VF attributes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24bnxt_en: Restrict a PF in Multi-Host mode from changing port PHY configurationDeepak Khungar
This change restricts the PF in multi-host mode from setting any port level PHY configuration. The settings are controlled by firmware in Multi-Host mode. Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24bnxt_en: Check the FW_LLDP_AGENT flag before allowing DCBX host agent.Michael Chan
Check the additional flag in bnxt_hwrm_func_qcfg() before allowing DCBX to be done in host mode. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 15:00:39 +0000