| Age | Commit message (Collapse) | Author |
|---|
|
Starting with commit:
95433f726301 ("srcu: Begin offloading srcu_struct fields to srcu_update")
...it is no longer possible to do:
static DEFINE_SRCU(x)
Switch to DEFINE_STATIC_SRCU(x) to fix:
tools/testing/cxl/test/mock.c:22:1: error: duplicate ‘static’
22 | static DEFINE_SRCU(cxl_mock_srcu);
| ^~~~~~
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168392709546.1135523.10424917245934547117.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
SYM_FUNC_START_LOCAL_NOALIGN() adds an endbr leading to this layout
(leaving only the last 2 bytes of the address):
3bff <zen_untrain_ret>:
3bff: f3 0f 1e fa endbr64
3c03: f6 test $0xcc,%bl
3c04 <__x86_return_thunk>:
3c04: c3 ret
3c05: cc int3
3c06: 0f ae e8 lfence
However, "the RET at __x86_return_thunk must be on a 64 byte boundary,
for alignment within the BTB."
Use SYM_START instead.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
- fix incorrect number of bitmap entries for space cache if loading is
interrupted by some error
- fix backref walking, this breaks a mode of LOGICAL_INO_V2 ioctl that
is used in deduplication tools
- zoned mode fixes:
- properly finish zone reserved for relocation
- correctly calculate super block zone end on ZNS
- properly initialize new extent buffer for redirty
- make mount option clear_cache work with block-group-tree, to rebuild
free-space-tree instead of temporarily disabling it that would lead
to a forced read-only mount
- fix alignment check for offset when printing extent item
* tag 'for-6.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: make clear_cache mount option to rebuild FST without disabling it
btrfs: zero the buffer before marking it dirty in btrfs_redirty_list_add
btrfs: zoned: fix full zone super block reading on ZNS
btrfs: zoned: zone finish data relocation BG with last IO
btrfs: fix backref walking not returning all inode refs
btrfs: fix space cache inconsistency after error loading it from disk
btrfs: print-tree: parent bytenr must be aligned to sector size
|
|
Pull cifs client fixes from Steve French:
- fix for copy_file_range bug for very large files that are multiples
of rsize
- do not ignore "isolated transport" flag if set on share
- set rasize default better
- three fixes related to shutdown and freezing (fixes 4 xfstests, and
closes deferred handles faster in some places that were missed)
* tag '6.4-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: release leases for deferred close handles when freezing
smb3: fix problem remounting a share after shutdown
SMB3: force unmount was failing to close deferred close files
smb3: improve parallel reads of large files
do not reuse connection if share marked as isolated
cifs: fix pcchunk length type in smb2_copychunk_range
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fix from Christian Brauner:
"During the pipe nonblock rework the check for both O_NONBLOCK and
IOCB_NOWAIT was dropped. Both checks need to be performed to ensure
that files without O_NONBLOCK but IOCB_NOWAIT don't block when writing
to or reading from a pipe.
This just contains the fix adding the check for IOCB_NOWAIT back in"
* tag 'vfs/v6.4-rc1/pipe' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pipe: check for IOCB_NOWAIT alongside O_NONBLOCK
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix making io_uring_sqe_cmd() available regardless of
CONFIG_IO_URING, fixing a regression introduced during the merge
window if nvme was selected but io_uring was not"
* tag 'io_uring-6.4-2023-05-12' of git://git.kernel.dk/linux:
io_uring: make io_uring_sqe_cmd() unconditionally available
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"Just a single fix this week for a build issue. That'd usually be a
good sign, but we've started to get some reports of boot failures on
some hardware/bootloader configurations. Nothing concrete yet, but
I've got a funny feeling that's where much of the bug hunting is going
right now.
Nothing's reproducing on my end, though, and this fixes some pretty
concrete issues so I figured there's no reason to delay it:
- a fix to the linker script to avoid orpahaned sections in
kernel/pi"
* tag 'riscv-for-linus-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix orphan section warnings caused by kernel/pi
|
|
Documentation/block/request.rst is outdated and should be removed.
Also delete its entry in the block/index.rst file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20230507182606.12647-1-rdunlap@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pipe reads or writes need to enable nonblocking attempts, if either
O_NONBLOCK is set on the file, or IOCB_NOWAIT is set in the iocb being
passed in. The latter isn't currently true, ensure we check for both
before waiting on data or space.
Fixes: afed6271f5b0 ("pipe: set FMODE_NOWAIT on pipes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <e5946d67-4e5e-b056-ba80-656bab12d9f6@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In case of CONFIG_BLKDEV_UBLK_LEGACY_OPCODES, type of cmd opcode could
be 0 or 'u'; and type can only be 'u' if CONFIG_BLKDEV_UBLK_LEGACY_OPCODES
isn't set.
So fix the wrong check.
Fixes: 2d786e66c966 ("block: ublk: switch to ioctl command encoding")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230505153142.1258336-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since flush bios are implemented as writes with no data and
the preflush flag per Christoph's comment [1].
And we need to change it in rnbd accordingly. Otherwise, I
got splatting when create fs from rnbd client.
[ 464.028545] ------------[ cut here ]------------
[ 464.028553] WARNING: CPU: 0 PID: 65 at block/blk-core.c:751 submit_bio_noacct+0x32c/0x5d0
[ ... ]
[ 464.028668] CPU: 0 PID: 65 Comm: kworker/0:1H Tainted: G OE 6.4.0-rc1 #9
[ 464.028671] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 464.028673] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[ 464.028717] RIP: 0010:submit_bio_noacct+0x32c/0x5d0
[ 464.028720] Code: 03 0f 85 51 fe ff ff 48 8b 43 18 8b 88 04 03 00 00 85 c9 0f 85 3f fe ff ff e9 be fd ff ff 0f b6 d0 3c 0d 74 26 83 fa 01 74 21 <0f> 0b b8 0a 00 00 00 e9 56 fd ff ff 4c 89 e7 e8 70 a1 03 00 84 c0
[ 464.028722] RSP: 0018:ffffaf3680b57c68 EFLAGS: 00010202
[ 464.028724] RAX: 0000000000060802 RBX: ffffa09dcc18bf00 RCX: 0000000000000000
[ 464.028726] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffa09dde081d00
[ 464.028727] RBP: ffffaf3680b57c98 R08: ffffa09dde081d00 R09: ffffa09e38327200
[ 464.028729] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa09dde081d00
[ 464.028730] R13: ffffa09dcb06e1e8 R14: 0000000000000000 R15: 0000000000200000
[ 464.028733] FS: 0000000000000000(0000) GS:ffffa09e3bc00000(0000) knlGS:0000000000000000
[ 464.028735] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 464.028736] CR2: 000055a4e8206c40 CR3: 0000000119f06000 CR4: 00000000003506f0
[ 464.028738] Call Trace:
[ 464.028740] <TASK>
[ 464.028746] submit_bio+0x1b/0x80
[ 464.028748] rnbd_srv_rdma_ev+0x50d/0x10c0 [rnbd_server]
[ 464.028754] ? percpu_ref_get_many.constprop.0+0x55/0x140 [rtrs_server]
[ 464.028760] ? __this_cpu_preempt_check+0x13/0x20
[ 464.028769] process_io_req+0x1dc/0x450 [rtrs_server]
[ 464.028775] rtrs_srv_inv_rkey_done+0x67/0xb0 [rtrs_server]
[ 464.028780] __ib_process_cq+0xbc/0x1f0 [ib_core]
[ 464.028793] ib_cq_poll_work+0x2b/0xa0 [ib_core]
[ 464.028804] process_one_work+0x2a9/0x580
[1]. https://lore.kernel.org/all/ZFHgefWofVt24tRl@infradead.org/
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230512034631.28686-1-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230512130533.98709-1-ivan.orlov0322@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
- fix early release of request packet
* tag 'firewire-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: net: fix unexpected release of object for asynchronous request packet
|
|
Minor fix to reset the info field to NULL in case of error.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When tcp_v4_send_reset() is called with @sk == NULL,
we do not change ctl_sk->sk_priority, which could have been
set from a prior invocation.
Change tcp_v4_send_reset() to set sk_priority and sk_mark
fields before calling ip_send_unicast_reply().
This means tcp_v4_send_reset() and tcp_v4_send_ack()
no longer have to clear ctl_sk->sk_mark after
their call to ip_send_unicast_reply().
Fixes: f6c0f5d209fa ("tcp: honor SO_PRIORITY in TIME_WAIT state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's yet another laptop that needs the fixup to enable mute and
micmute LEDs. So do it accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230512083417.157127-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When client and server establish a connection through vsock,
the client send a request to the server to initiate the connection,
then start a timer to wait for the server's response. When the server's
RESPONSE message arrives, the timer also times out and exits. The
server's RESPONSE message is processed first, and the connection is
established. However, the client's timer also times out, the original
processing logic of the client is to directly set the state of this vsock
to CLOSE and return ETIMEDOUT. It will not notify the server when the port
is released, causing the server port remain.
when client's vsock_connect timeout，it should check sk state is
ESTABLISHED or not. if sk state is ESTABLISHED, it means the connection
is established, the client should not set the sk state to CLOSE
Note: I encountered this issue on kernel-4.18, which can be fixed by
this patch. Then I checked the latest code in the community
and found similar issue.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Zhuang Shengen <zhuangshengen@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default we would not want RXFCS and RXALL features enabled as they are
mainly intended for debugging purposes. This does not stop users from
enabling them later on as needed.
Fixes: 8e57daf70671 ("sfc_ef100: RX path for EF100")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add typical resolution for Full-HD monitors.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
As not all ICE_TX_FLAGS_* fit in current 16-bit limited
tx_flags field that was introduced in the Fixes commit,
VLAN-related information would be discarded completely.
As such, creating a vlan and trying to run ping through
would result in no traffic passing.
Fix that by refactoring tx_flags variable into flags only and
a separate variable that holds VLAN ID. As there is some space left,
type variable can fit between those two. Pahole reports no size
change to ice_tx_buf struct.
Fixes: aa1d3faf71a6 ("ice: Robustify cleaning/completing XDP Tx buffers")
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Pavilion 15 line has B&O top speakers similar to the x360 and
applying the same profile produces good sound. Without this, the
sound would be tinny and underpowered without either applying
model=alc295-hp-x360 or booting another OS first.
Signed-off-by: Ryan Underwood <nemesis@icequake.net>
Fixes: 563785edfcef ("ALSA: hda/realtek - Add quirk entry for HP Pavilion 15")
Link: https://lore.kernel.org/r/ZF0mpcMz3ezP9KQw@icequake.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ieee80211_ops::sta_rc_update must be atomic, because
ieee80211_chan_bw_change() holds rcu_read lock while calling
drv_sta_rc_update(), so create a work to do original things.
Voluntary context switch within RCU read-side critical section!
WARNING: CPU: 0 PID: 4621 at kernel/rcu/tree_plugin.h:318
rcu_note_context_switch+0x571/0x5d0
CPU: 0 PID: 4621 Comm: kworker/u16:2 Tainted: G W OE
Workqueue: phy3 ieee80211_chswitch_work [mac80211]
RIP: 0010:rcu_note_context_switch+0x571/0x5d0
Call Trace:
<TASK>
__schedule+0xb0/0x1460
? __mod_timer+0x116/0x360
schedule+0x5a/0xc0
schedule_timeout+0x87/0x150
? trace_raw_output_tick_stop+0x60/0x60
wait_for_completion_timeout+0x7b/0x140
usb_start_wait_urb+0x82/0x160 [usbcore
usb_control_msg+0xe3/0x140 [usbcore
rtw_usb_read+0x88/0xe0 [rtw_usb
rtw_usb_read8+0xf/0x10 [rtw_usb
rtw_fw_send_h2c_command+0xa0/0x170 [rtw_core
rtw_fw_send_ra_info+0xc9/0xf0 [rtw_core
drv_sta_rc_update+0x7c/0x160 [mac80211
ieee80211_chan_bw_change+0xfb/0x110 [mac80211
ieee80211_change_chanctx+0x38/0x130 [mac80211
ieee80211_vif_use_reserved_switch+0x34e/0x900 [mac80211
ieee80211_link_use_reserved_context+0x88/0xe0 [mac80211
ieee80211_chswitch_work+0x95/0x170 [mac80211
process_one_work+0x201/0x410
worker_thread+0x4a/0x3b0
? process_one_work+0x410/0x410
kthread+0xe1/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Cc: stable@vger.kernel.org
Fixes: c1edc86472fc ("rtw88: add ieee80211:sta_rc_update ops")
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/linux-wireless/f1e31e8e-f84e-3791-50fb-663a83c5c6e9@lwfinger.net/T/#t
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230508085429.46653-1-pkshih@realtek.com
|
|
Though SER can recover this case, traffic can get stuck for a while. Fix it
by adjusting page quota to avoid hardware access null page of CMAC/DMAC.
Fixes: a1cb097168fa ("wifi: rtw89: 8852b: configure DLE mem")
Fixes: 3e870b481733 ("wifi: rtw89: 8852b: add HFC quota arrays")
Cc: stable@vger.kernel.org
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://github.com/lwfinger/rtw89/issues/226#issuecomment-1520776761
Link: https://github.com/lwfinger/rtw89/issues/240
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230426034737.24870-1-pkshih@realtek.com
|
|
The stats->tx_bytes shall subtract retry byte from tx byte.
Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/b3cd45596943cf5a06b2e08e2fe732ab0b51311b.1682285873.git.ryder.lee@mediatek.com
|
|
To avoid sparse warning:
sparse: warning: invalid assignment: |=
sparse: left side has type restricted __le32
sparse: right side has type unsigned lon
Fixes: 15ee62e73705 ("wifi: mt76: mt7996: enable BSS_CHANGED_BASIC_RATES support")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/16fa938373e3b145cb07a2c98d2428fea2abadba.1682285873.git.ryder.lee@mediatek.com
|
|
Line6 Pod Go (0e41:424b) requires the similar workaround for the fixed
48k sample rate like other Line6 models. This patch adds the
corresponding entry to line6_parse_audio_format_rate_quirk().
Reported-by: John Humlick <john@humlick.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230512075858.22813-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This code was supposed to return an error code if init_stream()
failed, but it instead freed dg00x->rx_stream and returned success.
This potentially leads to a use after free.
Fixes: 9a08067ec318 ("ALSA: firewire-digi00x: support AMDTP domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/c224cbd5-d9e2-4cd4-9bcf-2138eb1d35c6@kili.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It seems that we mostly get netdev CCed on wireless patches
which are written by people who don't know any better and
CC everything that get_maintainers spits out. Rather than
patches which indeed could benefit from general networking
review.
Marking them down in patchwork as Awaiting Upstream is
a bit tedious.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch corrects the NFP_NET_MAX_DSCP definition in the main.h file.
The incorrect definition result DSCP bits not being mapped properly when
DCB is set. When NFP_NET_MAX_DSCP was defined as 4, the next 60 DSCP
bits failed to be set.
Fixes: 9b7fe8046d74 ("nfp: add DCB IEEE support")
Cc: stable@vger.kernel.org
Signed-off-by: Huayu Chen <huayu.chen@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Documentation/netlink/ contains machine-readable protocol
specs in YAML. Those are much like device tree bindings,
no point CCing docs@ for the changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
|
|
Neil moved away from SCTP related duties.
Move him to CREDITS then and while at it, update SCTP
project website.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the W/A for packet errors seen with short cables (<1m) between
two DP83867 PHYs.
The W/A recommended by DM requires FFE Equalizer Configuration tuning by
writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard
and soft resets as follows:
write_reg(0x001F, 0x8000); //hard reset
write_reg(DSP_FFE_CFG, 0x0E81);
write_reg(0x001F, 0x4000); //soft reset
Since DP83867 PHY DM says "Changing this register to 0x0E81, will not
affect Long Cable performance.", enable the W/A by default.
Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When building the boot wrapper assembly files with clang after
commit 648a1783fe25 ("powerpc/boot: Fix boot wrapper code generation
with CONFIG_POWER10_CPU"), the following warnings appear for each file
built:
'-prefixed' is not a recognized feature for this target (ignoring feature)
'-pcrel' is not a recognized feature for this target (ignoring feature)
While it is questionable whether or not LLVM should be emitting a
warning when passed negative versions of code generation flags when
building assembly files (since it does not emit a warning for the
altivec and vsx flags), it is easy enough to work around this by just
moving the disabled flags to BOOTCFLAGS after the assignment of
BOOTAFLAGS, so that they are not added when building assembly files.
Do so to silence the warnings.
Fixes: 648a1783fe25 ("powerpc/boot: Fix boot wrapper code generation with CONFIG_POWER10_CPU")
Link: https://github.com/ClangBuiltLinux/linux/issues/1839
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230427-remove-power10-args-from-boot-aflags-clang-v1-1-9107f7c943bc@kernel.org
|
|
Apply a workaround for what appears to be a hardware quirk.
The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.
This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).
Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
i2cset -y 0 0x1a $(($1*2)) $2
}
For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x87 # out, dac
ssmset 0x06 0x07 # chip
OK
(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
(enable MCLK)
OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x06 0x1f # chip
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
ssmset 0x06 0x07 # dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
ssmset 0x06 0x07 # out
NOT OK
For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK
(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
(enable MCLK after reset)
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
NOT OK
ssmset 0x06 0x07 # chip, out, dac
NOT OK
Signed-off-by: Paweł Anikiel <pan@semihalf.com
Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
In the (unlikely) event that pm_runtime_get() (disguised as
pm_runtime_resume_and_get()) fails, the remove callback returned an
error early. The problem with this is that the driver core ignores the
error value and continues removing the device. This results in a
resource leak. Worse the devm allocated resources are freed and so if a
callback of the driver is called later the register mapping is already
gone which probably results in a crash.
Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230510200020.1534610-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After blamed commit, nexthop_fib6_nh_bh() and nexthop_fib6_nh()
are the same.
Delete nexthop_fib6_nh_bh(), and convert /proc/net/ipv6_route
to standard rcu to avoid this splat:
[ 5723.180080] WARNING: suspicious RCU usage
[ 5723.180083] -----------------------------
[ 5723.180084] include/net/nexthop.h:516 suspicious rcu_dereference_check() usage!
[ 5723.180086]
other info that might help us debug this:
[ 5723.180087]
rcu_scheduler_active = 2, debug_locks = 1
[ 5723.180089] 2 locks held by cat/55856:
[ 5723.180091] #0: ffff9440a582afa8 (&p->lock){+.+.}-{3:3}, at: seq_read_iter (fs/seq_file.c:188)
[ 5723.180100] #1: ffffffffaac07040 (rcu_read_lock_bh){....}-{1:2}, at: rcu_lock_acquire (include/linux/rcupdate.h:326)
[ 5723.180109]
stack backtrace:
[ 5723.180111] CPU: 14 PID: 55856 Comm: cat Tainted: G S I 6.3.0-dbx-DEV #528
[ 5723.180115] Call Trace:
[ 5723.180117] <TASK>
[ 5723.180119] dump_stack_lvl (lib/dump_stack.c:107)
[ 5723.180124] dump_stack (lib/dump_stack.c:114)
[ 5723.180126] lockdep_rcu_suspicious (include/linux/context_tracking.h:122)
[ 5723.180132] ipv6_route_seq_show (include/net/nexthop.h:?)
[ 5723.180135] ? ipv6_route_seq_next (net/ipv6/ip6_fib.c:2605)
[ 5723.180140] seq_read_iter (fs/seq_file.c:272)
[ 5723.180145] seq_read (fs/seq_file.c:163)
[ 5723.180151] proc_reg_read (fs/proc/inode.c:316 fs/proc/inode.c:328)
[ 5723.180155] vfs_read (fs/read_write.c:468)
[ 5723.180160] ? up_read (kernel/locking/rwsem.c:1617)
[ 5723.180164] ksys_read (fs/read_write.c:613)
[ 5723.180168] __x64_sys_read (fs/read_write.c:621)
[ 5723.180170] do_syscall_64 (arch/x86/entry/common.c:?)
[ 5723.180174] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 5723.180177] RIP: 0033:0x7fa455677d2a
Fixes: 09eed1192cec ("neighbour: switch to standard rcu, instead of rcu_bh")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230510154646.370659-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 565b4824c39f ("devlink: change port event netdev notifier
from per-net to global") changed original per-net notifier to be
per-devlink instance. That fixed the issue of non-receiving events
of netdev uninit if that moved to a different namespace.
That worked fine in -net tree.
However, later on when commit ee75f1fc44dd ("net/mlx5e: Create
separate devlink instance for ethernet auxiliary device") and
commit 72ed5d5624af ("net/mlx5: Suspend auxiliary devices only in
case of PCI device suspend") were merged, a deadlock was introduced
when removing a namespace with devlink instance with another nested
instance.
Here there is the bad flow example resulting in deadlock with mlx5:
net_cleanup_work -> cleanup_net (takes down_read(&pernet_ops_rwsem) ->
devlink_pernet_pre_exit() -> devlink_reload() ->
mlx5_devlink_reload_down() -> mlx5_unload_one_devl_locked() ->
mlx5_detach_device() -> del_adev() -> mlx5e_remove() ->
mlx5e_destroy_devlink() -> devlink_free() ->
unregister_netdevice_notifier() (takes down_write(&pernet_ops_rwsem)
Steps to reproduce:
$ modprobe mlx5_core
$ ip netns add ns1
$ devlink dev reload pci/0000:08:00.0 netns ns1
$ ip netns del ns1
Resolve this by converting the notifier from per-devlink instance to
a static one registered during init phase and leaving it registered
forever. Use this notifier for all devlink port instances created
later on.
Note what a tree needs this fix only in case all of the cited fixes
commits are present.
Reported-by: Moshe Shemesh <moshe@nvidia.com>
Fixes: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
Fixes: ee75f1fc44dd ("net/mlx5e: Create separate devlink instance for ethernet auxiliary device")
Fixes: 72ed5d5624af ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230510144621.932017-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Andrea Mayer says:
====================
selftests: seg6: make srv6_end_dt4_l3vpn_test more robust
This pachset aims to improve and make more robust the selftests performed to
check whether SRv6 End.DT4 beahvior works as expected under different system
configurations.
Some Linux distributions enable Deduplication Address Detection and Reverse
Path Filtering mechanisms by default which can interfere with SRv6 End.DT4
behavior and cause selftests to fail.
The following patches improve selftests for End.DT4 by taking these two
mechanisms into account. Specifically:
- patch 1/2: selftests: seg6: disable DAD on IPv6 router cfg for
srv6_end_dt4_l3vpn_test
- patch 2/2: selftets: seg6: disable rp_filter by default in
srv6_end_dt4_l3vpn_test
====================
Link: https://lore.kernel.org/r/20230510111638.12408-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On some distributions, the rp_filter is automatically set (=1) by
default on a netdev basis (also on VRFs).
In an SRv6 End.DT4 behavior, decapsulated IPv4 packets are routed using
the table associated with the VRF bound to that tunnel. During lookup
operations, the rp_filter can lead to packet loss when activated on the
VRF.
Therefore, we chose to make this selftest more robust by explicitly
disabling the rp_filter during tests (as it is automatically set by some
Linux distributions).
Fixes: 2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The srv6_end_dt4_l3vpn_test instantiates a virtual network consisting of
several routers (rt-1, rt-2) and hosts.
When the IPv6 addresses of rt-{1,2} routers are configured, the Deduplicate
Address Detection (DAD) kicks in when enabled in the Linux distros running
the selftests. DAD is used to check whether an IPv6 address is already
assigned in a network. Such a mechanism consists of sending an ICMPv6 Echo
Request and waiting for a reply.
As the DAD process could take too long to complete, it may cause the
failing of some tests carried out by the srv6_end_dt4_l3vpn_test script.
To make the srv6_end_dt4_l3vpn_test more robust, we disable DAD on routers
since we configure the virtual network manually and do not need any address
deduplication mechanism at all.
Fixes: 2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"About the usual for this stage, bunch of amdgpu, a few i915 and a
scattering of fixes across the board"
dsc:
- macro fixes
simplefb:
- fix VESA format
scheduler:
- timeout handling fix
fbdev:
- avoid potential out-of-bounds access in generic fbdev emulation
ast:
- improve AST2500+ compat on ARM
mipi-dsi:
- small mipi-dsi fix
amdgpu:
- VCN3 fixes
- APUs always support PCI atomics
- legacy power management fixes
- DCN 3.1.4 fix
- DCFCLK fix
- fix several RAS irq refcount mismatches
- GPU Reset fix
- GFX 11.0.4 fix
i915:
- taint kernel when force_probe is used
- NULL deref and div-by-zero fixes for display
- GuC error capture fix for Xe devices"
* tag 'drm-fixes-2023-05-12' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amdgpu: change gfx 11.0.4 external_id range
drm/amdgpu/jpeg: Remove harvest checking for JPEG3
drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras
drm/amd/pm: avoid potential UBSAN issue on legacy asics
drm/i915: taint kernel when force probing unsupported devices
drm/i915/dp: prevent potential div-by-zero
drm/i915: Fix NULL ptr deref by checking new_crtc_state
drm/i915/guc: Don't capture Gen8 regs on Xe devices
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)
drm/amdgpu: drop gfx_v11_0_cp_ecc_error_irq_funcs
drm/amd/display: Enforce 60us prefetch for 200Mhz DCFCLK modes
drm/amd/display: Add symclk workaround during disable link output
drm/amd/pm: parse pp_handle under appropriate conditions
drm/amdgpu: set gfx9 onwards APU atomics support to be true
drm/amdgpu/nv: update VCN 3 max HEVC encoding resolution
drm/sched: Check scheduler work queue before calling timeout handling
drm/mipi-dsi: Set the fwnode for mipi_dsi_device
drm/nouveau/disp: More DP_RECEIVER_CAP_SIZE array fixes
drm/dsc: fix DP_DSC_MAX_BPP_DELTA_* macro values
...
|
|
Pull xfs bug fixes from Dave Chinner:
"Largely minor bug fixes and cleanups, th emost important of which are
probably the fixes for regressions in the extent allocation code:
- fixes for inode garbage collection shutdown racing with work queue
updates
- ensure inodegc workers run on the CPU they are supposed to
- disable counter scrubbing until we can exclusively freeze the
filesystem from the kernel
- regression fixes for new allocation related bugs
- a couple of minor cleanups"
* tag 'xfs-6.4-rc1-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix xfs_inodegc_stop racing with mod_delayed_work
xfs: disable reaping in fscounters scrub
xfs: check that per-cpu inodegc workers actually run on that cpu
xfs: explicitly specify cpu when forcing inodegc delayed work to run immediately
xfs: fix negative array access in xfs_getbmap
xfs: don't allocate into the data fork for an unshare request
xfs: flush dirty data and drain directios before scrubbing cow fork
xfs: set bnobt/cntbt numrecs correctly when formatting new AGs
xfs: don't unconditionally null args->pag in xfs_bmap_btalloc_at_eof
|
|
A use-after-free bug may occur if init_imstt invokes framebuffer_release
and free the info ptr. The caller, imsttfb_probe didn't notice that and
still keep the ptr as private data in pdev.
If we remove the driver which will call imsttfb_remove to make cleanup,
UAF happens.
Fix it by return error code if bad case happens in init_imstt.
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amdgpu:
- VCN3 fixes
- APUs always support PCI atomics
- Legacy power management fixes
- DCN 3.1.4 fix
- DCFCLK fix
- Fix several RAS irq refcount mismatches
- GPU Reset fix
- GFX 11.0.4 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511141755.7896-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix to taint kernel when force_probe is used
- Null deref and div-by-zero fixes for display
- GuC error capture fix for Xe devices
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZFzdYV3O8lvVJ1DQ@jlahtine-mobl.ger.corp.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.4-rc2:
- More DSC macro fixes.
- Small mipi-dsi fix.
- Scheduler timeout handling fix.
---
drm-misc-fixes for v6.4-rc1:
- Fix DSC macros.
- Fix VESA format for simplefb.
- Prohibit potential out-of-bounds access in generic fbdev emulation.
- Improve AST2500+ compat on ARM.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b34135e3-2651-4e0a-a776-9b047882b1b2@linux.intel.com
|
|
These models use 2 CS35L41 amplifiers using SPI for down-facing
speakers.
alc285_fixup_speaker2_to_dac1 is needed to fix volume control of the
down-facing speakers.
Pin configs are needed to enable headset mic detection.
Note that these models lack the ACPI _DSD properties needed to
initialize the amplifiers. They can be added during boot to get working
sound out of the speakers:
https://gist.github.com/lamperez/862763881c0e1c812392b5574727f6ff
Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com>
Link: https://lore.kernel.org/r/20230511161510.315170-1-ealex95@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add support for HP EliteBook 835/845/845W/865 G10 laptops
with CS35L41 amplifiers on I2C/SPI bus connected to Realtek codec.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230510142227.32945-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For errors after msm_submitqueue_get(), we need to drop the submitqueue
reference. Additionally after get_unused_fd() we need to drop the fd.
The ordering for dropping the queue lock and put_unused_fd() is not
important, so just move this all into out_post_unlock.
v2: Only drop queue ref if submit doesn't take it
v3: Fix unitialized submit ref in error path
v4: IS_ERR_OR_NULL()
Reported-by: pinkperfect2021@gmail.com
Fixes: f0de40a131d9 drm/msm: ("Reorder lock vs submit alloc")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/536073/
Link: https://lore.kernel.org/r/20230509203041.440619-1-robdclark@gmail.com
|
|
In the case that no IOMMU is available, msm_iommu_new can return NULL
which should be handled. Without we will get a NULL pointer dereference
in the next statement when we try to use the mmu variable.
Fixes: 8cceb773f565 ("drm/msm/adreno: stall translation on fault for all GPU families")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/535915/
Link: https://lore.kernel.org/r/20230508-6-4-drm-msm-iommu-fixup-v1-1-a7a21ec94f5b@z3ntu.xyz
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
