summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-31gpio: realtek-otto: switch to 32-bit I/OSander Vanheule
By using 16-bit I/O on the GPIO peripheral, which is apparently not safe on MIPS, the IMR can end up containing garbage. This then results in interrupt triggers for lines that don't have an interrupt handler associated. The irq_desc lookup fails, and the ISR will not be cleared, keeping the CPU busy until reboot, or until another IMR operation restores the correct value. This situation appears to happen very rarely, for < 0.5% of IMR writes. Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory mapped peripheral registers, switch to using 32-bit I/O only, operating on the entire bank for all single bit line settings. For 2-bit line settings, with 16-bit port values, stick to manual (un)packing. This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48). Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> # DGS-1210-52 Reported-by: Birger Koblitz <mail@birger-koblitz.de> # GS728TP Reported-by: Jan Hoffmann <jan@3e8.eu> # 1920-16G Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support") Signed-off-by: Sander Vanheule <sander@svanheule.net> Cc: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-08-31cachefiles: make on-demand request distribution fairerXin Yin
For now, enqueuing and dequeuing on-demand requests all start from idx 0, this makes request distribution unfair. In the weighty concurrent I/O scenario, the request stored in higher idx will starve. Searching requests cyclically in cachefiles_ondemand_daemon_read, makes distribution fairer. Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie") Reported-by: Yongqing Li <liyongqing@bytedance.com> Signed-off-by: Xin Yin <yinxin.x@bytedance.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20220817065200.11543-1-yinxin.x@bytedance.com/ # v1 Link: https://lore.kernel.org/r/20220825020945.2293-1-yinxin.x@bytedance.com/ # v2
2022-08-31cachefiles: fix error return code in cachefiles_ondemand_copen()Sun Ke
The cache_size field of copen is specified by the user daemon. If cache_size < 0, then the OPEN request is expected to fail, while copen itself shall succeed. However, returning 0 is indeed unexpected when cache_size is an invalid error code. Fix this by returning error when cache_size is an invalid error code. Changes ======= v4: update the code suggested by Dan v3: update the commit log suggested by Jingbo. Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie") Signed-off-by: Sun Ke <sunke32@huawei.com> Suggested-by: Jeffle Xu <jefflexu@linux.alibaba.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220818111935.1683062-1-sunke32@huawei.com/ # v2 Link: https://lore.kernel.org/r/20220818125038.2247720-1-sunke32@huawei.com/ # v3 Link: https://lore.kernel.org/r/20220826023515.3437469-1-sunke32@huawei.com/ # v4
2022-08-31vfio/type1: Unpin zero pagesAlex Williamson
There's currently a reference count leak on the zero page. We increment the reference via pin_user_pages_remote(), but the page is later handled as an invalid/reserved page, therefore it's not accounted against the user and not unpinned by our put_pfn(). Introducing special zero page handling in put_pfn() would resolve the leak, but without accounting of the zero page, a single user could still create enough mappings to generate a reference count overflow. The zero page is always resident, so for our purposes there's no reason to keep it pinned. Therefore, add a loop to walk pages returned from pin_user_pages_remote() and unpin any zero pages. Cc: stable@vger.kernel.org Reported-by: Luboslav Pivarc <lpivarc@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/166182871735.3518559.8884121293045337358.stgit@omen Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-08-31fscache: fix misdocumented parameterKhalid Masum
This patch fixes two warnings generated by make docs. The functions fscache_use_cookie and fscache_unuse_cookie, both have a parameter named cookie. But they are documented with the name "object" with unclear description. Which generates the warning when creating docs. This commit will replace the currently misdocumented parameter names with the correct ones while adding proper descriptions. CC: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20220521142446.4746-1-khalid.masum.92@gmail.com/ # v1 Link: https://lore.kernel.org/r/20220818040738.12036-1-khalid.masum.92@gmail.com/ # v2 Link: https://lore.kernel.org/r/880d7d25753fb326ee17ac08005952112fcf9bdb.1657360984.git.mchehab@kernel.org/ # Mauro's version
2022-08-31USB: serial: ch341: fix disabled rx timer on older devicesJohan Hovold
At least one older CH341 appears to have the RX timer enable bit inverted so that setting it disables the RX timer and prevents the FIFO from emptying until it is full. Only set the RX timer enable bit for devices with version newer than 0x27 (even though this probably affects all pre-0x30 devices). Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31USB: serial: ch341: fix lost character on LCR updatesJohan Hovold
Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost. Note that updating LCR using the INIT command has no effect on these devices either. Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31powerpc: Fix hard_irq_disable() with sanitizerChristophe Leroy
As reported by Zhouyi Zhou, WRITE_ONCE() is not atomic as expected when KASAN or KCSAN are compiled in. Fix it by re-implementing it using inline assembly. Fixes: 077fc62b2b66 ("powerpc/irq: remove inline assembly in hard_irq_disable macro") Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a8298991b3df049a54ee8e558838e34265812014.1661272586.git.christophe.leroy@csgroup.eu
2022-08-31ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handlerDuoming Zhou
The function neigh_timer_handler() is a timer handler that runs in an atomic context. When used by rocker, neigh_timer_handler() calls "kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in atomic context bug will happen. One of the processes is shown below: ofdpa_fib4_add() ... neigh_add_timer() (wait a timer) neigh_timer_handler() neigh_release() neigh_destroy() rocker_port_neigh_destroy() rocker_world_port_neigh_destroy() ofdpa_port_neigh_destroy() ofdpa_port_ipv4_neigh() kzalloc(sizeof(.., GFP_KERNEL) //may sleep This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to GFP_ATOMIC in order to mitigate the bug. Fixes: 00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31USB: serial: cp210x: add Decagon UCA device idJohan Hovold
Add the device id for Decagon Devices USB Cable Adapter. Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108 Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31perf metric: Return early if no CPU PMU table existsIan Rogers
Previous behavior is to segfault if there is no CPU PMU table and a metric is sought. To reproduce compile with NO_JEVENTS=1 then request a metric, for example, "perf stat -M IPC true". Committer testing: Before: $ make -k NO_JEVENTS=1 BUILD_BPF_SKEL=1 O=/tmp/build/perf-urgent -C tools/perf install-bin $ perf stat -M IPC true Segmentation fault (core dumped) $ After: $ perf stat -M IPC true Usage: perf stat [<options>] [<command>] -M, --metrics <metric/metric group list> monitor specified metrics or metric groups (separated by ,) $ Fixes: 00facc760903be66 ("perf jevents: Switch build to use jevents.py") Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Florian Fischer <florian.fischer@muhq.space> Cc: Ian Rogers <rogers.email@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20220830164846.401143-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-31gpio: pca953x: Add mutex_lock for regcache sync in PMHaibo Chen
The regcache sync will set the cache_bypass = true, at that time, when there is regmap write operation, it will bypass the regmap cache, then the regcache sync will write back the value from cache to register, which is not as our expectation. Though regmap already use its internal lock to avoid such issue, but this driver force disable the regmap internal lock in its regmap config: disable_locking = true To avoid this issue, use the driver's own lock to do the protect in system PM. Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-08-31netfilter: nf_tables: clean up hook list when offload flags check failsPablo Neira Ayuso
splice back the hook list so nft_chain_release_hook() has a chance to release the hooks. BUG: memory leak unreferenced object 0xffff88810180b100 (size 96): comm "syz-executor133", pid 3619, jiffies 4294945714 (age 12.690s) hex dump (first 32 bytes): 28 64 23 02 81 88 ff ff 28 64 23 02 81 88 ff ff (d#.....(d#..... 90 a8 aa 83 ff ff ff ff 00 00 b5 0f 81 88 ff ff ................ backtrace: [<ffffffff83a8c59b>] kmalloc include/linux/slab.h:600 [inline] [<ffffffff83a8c59b>] nft_netdev_hook_alloc+0x3b/0xc0 net/netfilter/nf_tables_api.c:1901 [<ffffffff83a9239a>] nft_chain_parse_netdev net/netfilter/nf_tables_api.c:1998 [inline] [<ffffffff83a9239a>] nft_chain_parse_hook+0x33a/0x530 net/netfilter/nf_tables_api.c:2073 [<ffffffff83a9b14b>] nf_tables_addchain.constprop.0+0x10b/0x950 net/netfilter/nf_tables_api.c:2218 [<ffffffff83a9c41b>] nf_tables_newchain+0xa8b/0xc60 net/netfilter/nf_tables_api.c:2593 [<ffffffff83a3d6a6>] nfnetlink_rcv_batch+0xa46/0xd20 net/netfilter/nfnetlink.c:517 [<ffffffff83a3db79>] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:638 [inline] [<ffffffff83a3db79>] nfnetlink_rcv+0x1f9/0x220 net/netfilter/nfnetlink.c:656 [<ffffffff83a13b17>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [<ffffffff83a13b17>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [<ffffffff83a13fd6>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [<ffffffff83865ab6>] sock_sendmsg_nosec net/socket.c:714 [inline] [<ffffffff83865ab6>] sock_sendmsg+0x56/0x80 net/socket.c:734 [<ffffffff8386601c>] ____sys_sendmsg+0x36c/0x390 net/socket.c:2482 [<ffffffff8386a918>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536 [<ffffffff8386aaa8>] __sys_sendmsg+0x88/0x100 net/socket.c:2565 [<ffffffff845e5955>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845e5955>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: d54725cd11a5 ("netfilter: nf_tables: support for multiple devices per netdev hook") Reported-by: syzbot+5fcdbfab6d6744c57418@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-08-31regulator: Fix qcom,spmi-regulator schemaJean-Philippe Brucker
The DT validator reports an error in the schema: Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml: ignoring, error in schema: patternProperties: ^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$: properties Move the unevaluatedProperties statement out of the properties section to fix it. Fixes: 0b3bbd7646b0 ("regulator: qcom,spmi-regulator: Convert to dtschema") Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/20220831080503.17600-1-jean-philippe@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-31netfilter: br_netfilter: Drop dst references before setting.Harsh Modi
The IPv6 path already drops dst in the daddr changed case, but the IPv4 path does not. This change makes the two code paths consistent. Further, it is possible that there is already a metadata_dst allocated from ingress that might already be attached to skbuff->dst while following the bridge path. If it is not released before setting a new metadata_dst, it will be leaked. This is similar to what is done in bpf_set_tunnel_key() or ip6_route_input(). It is important to note that the memory being leaked is not the dst being set in the bridge code, but rather memory allocated from some other code path that is not being freed correctly before the skb dst is overwritten. An example of the leakage fixed by this commit found using kmemleak: unreferenced object 0xffff888010112b00 (size 256): comm "softirq", pid 0, jiffies 4294762496 (age 32.012s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 80 16 f1 83 ff ff ff ff ................ e1 4e f6 82 ff ff ff ff 00 00 00 00 00 00 00 00 .N.............. backtrace: [<00000000d79567ea>] metadata_dst_alloc+0x1b/0xe0 [<00000000be113e13>] udp_tun_rx_dst+0x174/0x1f0 [<00000000a36848f4>] geneve_udp_encap_recv+0x350/0x7b0 [<00000000d4afb476>] udp_queue_rcv_one_skb+0x380/0x560 [<00000000ac064aea>] udp_unicast_rcv_skb+0x75/0x90 [<000000009a8ee8c5>] ip_protocol_deliver_rcu+0xd8/0x230 [<00000000ef4980bb>] ip_local_deliver_finish+0x7a/0xa0 [<00000000d7533c8c>] __netif_receive_skb_one_core+0x89/0xa0 [<00000000a879497d>] process_backlog+0x93/0x190 [<00000000e41ade9f>] __napi_poll+0x28/0x170 [<00000000b4c0906b>] net_rx_action+0x14f/0x2a0 [<00000000b20dd5d4>] __do_softirq+0xf4/0x305 [<000000003a7d7e15>] __irq_exit_rcu+0xc3/0x140 [<00000000968d39a2>] sysvec_apic_timer_interrupt+0x9e/0xc0 [<000000009e920794>] asm_sysvec_apic_timer_interrupt+0x16/0x20 [<000000008942add0>] native_safe_halt+0x13/0x20 Florian Westphal says: "Original code was likely fine because nothing ever did set a skb->dst entry earlier than bridge in those days." Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Harsh Modi <harshmodi@google.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-08-31netfilter: remove nf_conntrack_helper sysctl and modparam togglesPablo Neira Ayuso
__nf_ct_try_assign_helper() remains in place but it now requires a template to configure the helper. A toggle to disable automatic helper assignment was added by: a9006892643a ("netfilter: nf_ct_helper: allow to disable automatic helper assignment") in 2012 to address the issues described in "Secure use of iptables and connection tracking helpers". Automatic conntrack helper assignment was disabled by: 3bb398d925ec ("netfilter: nf_ct_helper: disable automatic helper assignment") back in 2016. This patch removes the sysctl and modparam toggles, users now have to rely on explicit conntrack helper configuration via ruleset. Update tools/testing/selftests/netfilter/nft_conntrack_helper.sh to check that auto-assignment does not happen anymore. Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-08-31Revert "usb: add quirks for Lenovo OneLink+ Dock"Greg Kroah-Hartman
This reverts commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58. The quirk does not work properly, more work is needed to determine what should be done here. Reported-by: Oliver Neukum <oneukum@suse.com> Cc: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Cc: stable <stable@kernel.org> Fixes: 3d5f70949f1b ("usb: add quirks for Lenovo OneLink+ Dock") Link: https://lore.kernel.org/r/9a17ea86-079f-510d-e919-01bc53a6d09f@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the timeClaudiu Beznea
VDD_OTHER is not connected to any on board consumer thus it is not needed to keep it enabled all the time. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-9-claudiu.beznea@microchip.com
2022-08-31ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the timeClaudiu Beznea
ldo2 is not used by any consumer on sama5d27_wlsom1 board, thus don't keep it enabled all the time. Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-8-claudiu.beznea@microchip.com
2022-08-31ARM: dts: at91: sama7g5ek: specify proper regulator output rangesClaudiu Beznea
Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-7-claudiu.beznea@microchip.com
2022-08-31ARM: dts: at91: sama5d2_icp: specify proper regulator output rangesClaudiu Beznea
Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-6-claudiu.beznea@microchip.com
2022-08-31ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output rangesClaudiu Beznea
Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-5-claudiu.beznea@microchip.com
2022-08-31ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refreshClaudiu Beznea
On SAMA7G5, when resuming from backup and self-refresh, the bootloader performs DDR PHY recalibration by restoring the value of ZQ0SR0 (stored in RAM by Linux before going to backup and self-refresh). It has been discovered that the current procedure doesn't work for all possible values that might go to ZQ0SR0 due to hardware bug. The workaround to this is to avoid storing some values in ZQ0SR0. Thus Linux will read the ZQ0SR0 register and cache its value in RAM after processing it (using modified_gray_code array). The bootloader will restore the processed value. Fixes: d2d4716d8384 ("ARM: at91: pm: save ddr phy calibration data to securam") Suggested-by: Frederic Schumacher <frederic.schumacher@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-4-claudiu.beznea@microchip.com
2022-08-31ARM: at91: pm: fix self-refresh for sama7g5Claudiu Beznea
It has been discovered that on some parts, from time to time, self-refresh procedure doesn't work as expected. Debugging and investigating it proved that disabling AC DLL introduce glitches in RAM controllers which leads to unexpected behavior. This is confirmed as a hardware bug. DLL bypass disables 3 DLLs: 2 DX DLLs and AC DLL. Thus, keep only DX DLLs disabled. This introduce 6mA extra current consumption on VDDCORE when switching to any ULP mode or standby mode but the self-refresh procedure still works. Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5") Suggested-by: Frederic Schumacher <frederic.schumacher@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Cristian Birsan <cristian.birsan@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-3-claudiu.beznea@microchip.com
2022-08-30net: lan966x: improve error handle in lan966x_fdma_rx_get_frame()Dan Carpenter
Don't just print a warning. Clean up and return an error as well. Fixes: c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/YwjgDm/SVd5c1tQU@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30nfp: fix the access to management firmware hangingGao Xiao
When running `ethtool -p` with the old management firmware, the management firmware resource is not correctly released, which causes firmware related malfunction: all the access to management firmware hangs. It releases the management firmware resource when set id mode operation is not supported. Fixes: ccb9bc1dfa44 ("nfp: add 'ethtool --identify' support") Signed-off-by: Gao Xiao <gao.xiao@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20220829101651.633840-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30Merge tag 'ieee802154-for-net-2022-08-29' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== ieee802154 for net 2022-08-29 - repeated word fix from Jilin Yuan. - missed return code setting in the cc2520 driver by Li Qiong. - fixing a potential race in by defering the workqueue destroy in the adf7242 driver by Lin Ma. - fixing a long standing problem in the mac802154 rx path to match corretcly by Miquel Raynal. * tag 'ieee802154-for-net-2022-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan: ieee802154: cc2520: add rc code in cc2520_tx() net: mac802154: Fix a condition in the receive path net/ieee802154: fix repeated words in comments ieee802154/adf7242: defer destroy_workqueue call ==================== Link: https://lore.kernel.org/r/20220829100308.2802578-1-stefan@datenfreihafen.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30net: phy: micrel: Make the GPIO to be non-exclusiveHoratiu Vultur
The same GPIO line can be shared by multiple phys for the coma mode pin. If that is the case then, all the other phys that share the same line will failed to be probed because the access to the gpio line is not non-exclusive. Fix this by making access to the gpio line to be nonexclusive using flag GPIOD_FLAGS_BIT_NONEXCLUSIVE. This allows all the other PHYs to be probed. Fixes: 738871b09250ee ("net: phy: micrel: add coma mode GPIO") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220830064055.2340403-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30net: virtio_net: fix notification coalescing commentsAlvaro Karsz
Fix wording in comments for the notifications coalescing feature. Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20220823073947.14774-1-alvaro.karsz@solid-run.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()Maurizio Lombardi
TCP_FIN_WAIT2 and TCP_LAST_ACK were not handled, the connection is closing so we can ignore them and avoid printing the "unhandled state" warning message. [ 1298.852386] nvmet_tcp: queue 2 unhandled state 5 [ 1298.879112] nvmet_tcp: queue 7 unhandled state 5 [ 1298.884253] nvmet_tcp: queue 8 unhandled state 5 [ 1298.889475] nvmet_tcp: queue 9 unhandled state 5 v2: Do not call nvmet_tcp_schedule_release_queue(), just ignore the fin_wait2 and last_ack states. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-08-31nvmet-auth: add missing goto in nvmet_setup_auth()Hannes Reinecke
There's a goto missing in nvmet_setup_auth(), causing a kernel oops when nvme_auth_extract_key() fails. Reported-by: Tal Lossos <tallossos@gmail.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-08-31nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610Shyamin Ayesh
Lexar NM610 reports bogus eui64 values that appear to be the same across all drives. Quirk them out so they are not marked as "non globally unique" duplicates. Signed-off-by: Shyamin Ayesh <me@shyamin.com> [patch formatting] Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-08-30cifs: fix small mempool leak in SMB2_negotiate()Enzo Matsumiya
In some cases of failure (dialect mismatches) in SMB2_negotiate(), after the request is sent, the checks would return -EIO when they should be rather setting rc = -EIO and jumping to neg_exit to free the response buffer from mempool. Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-30smb3: use filemap_write_and_wait_range instead of filemap_write_and_waitSteve French
When doing insert range and collapse range we should be writing out the cached pages for the ranges affected but not the whole file. Fixes: c3a72bb21320 ("smb3: Move the flush out of smb2_copychunk_range() into its callers") Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-30drm/amdgpu: only init tap_delay ucode when it's included in ucode binaryHawking Zhang
Not all the gfx10 variants need to integrate global tap_delay and per se tap_delay firmwares Only init tap_delay ucode when it does include in rlc ucode binary so driver doesn't send a null buffer to psp for firmware loading Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix black flash when switching from ODM2to1 to ODMBypassVladimir Stempen
[Why] On secondary display hotplug we switch primary stream from ODM2to1 to ODMBypass mode. Current logic will trigger disabling front end for this stream. [How] We need to check if prev_odm_pipe is equal to NULL in order to disable dangling planes in this scenario. Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix check for stream and planeEthan Wellenreiter
[WHY] Function wasn't returning false when it had a no stream [HOW] Made it return false when it had no stream. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Re-initialize viewport after pipe mergeEthan Wellenreiter
[Why] Pipes get merged in preparation for SubVP but if they don't get used, and are in ODM or some other multi pipe config, it would calculate the voltage level with a viewport of just one pipe from when they were split resulting in too low of a voltage level. [How] Made it so that the viewport and other timing settings get rebuilt and re- initialized after the pipe merge, before calculating the voltage level so it would calculate it correctly. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Use correct plane for CAB cursor size allocationAurabindo Pillai
[Why&How] plane and stream variables used for cursor size allocation calculation were stale from previous iteration. Redo the iteration to find the correct cursor plane for the calculation. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: ensure no PCIe peer access for CPU XGMI iolinksAlex Sierra
[Why] Devices with CPU XGMI iolink do not support PCIe peer access. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/pm: bump SMU 13.0.0 driver_if header versionEvan Quan
To suppress the warning about version mismatch with the latest 78.54.0 PMFW. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/pm: use vbios carried pptable for all SMU13.0.7 SKUsEvan Quan
For those SMU13.0.7 unsecure SKUs, the vbios carried pptable is ready to go. Use that one instead of hardcoded softpptable. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/pm: use vbios carried pptable for those supported SKUsEvan Quan
For some SMU13.0.0 SKUs, the vbios carried pptable is ready to go. Use that one instead of hardcoded softpptable. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: fix wrong register accessCharlene Liu
[why] fw version check was for release branch. for staging, it has a chance to enter wrong code path. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: use actual cursor size instead of max for CAB allocationAurabindo Pillai
[Why&How] When calculating allocation for cursor size, get the real cursor through the HUBP instead of using the maximum cursor size for more optimal allocation Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: disable display fresh from MALL on an edge case for DCN321Aurabindo Pillai
[Why&How] When using a 4k monitor when cursor caching is not supported due to framebuffer being on an uncacheable address, enabling display refresh from MALL would trigger corruption if SS is enabled. Prevent entering SS if we are on the edge case and cursor caching is not possible. Do this only if cursor size larger than a 64x64@4bpp. Pull the cursor size calculation out of if condition since cursor address may not be set on all platforms Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix CAB cursor size allocation for DCN32/321Aurabindo Pillai
For calculating cursor size allocation, surface size was used, resulting in over allocation Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Missing HPO instance addedLeo Chen
[Why & How] Number of encoder is set to 4 but only 3 instances are created. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: set dig fifo read start level to 7 before dig fifo resetWang Fudong
[Why] DIG_FIFO_ERROR = 1 caused mst daisy chain 2nd monitor black. [How] We need to set dig fifo read start level = 7 before dig fifo reset during dig fifo enable according to hardware designer's suggestion. If it is zero, it will cause underflow or overflow and DIG_FIFO_ERROR = 1. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Wang Fudong <Fudong.Wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: Fix use-after-free in amdgpu_cs_ioctlYuBiao Wang
[Why] In amdgpu_cs_ioctl, amdgpu_job_free could be performed ealier if there is -ERESTARTSYS error. In this case, job->hw_fence could be not initialized yet. Putting hw_fence during amdgpu_job_free could lead to a use-after-free warning. [How] Check if drm_sched_job_init is performed before job_free by checking s_fence. v2: Check hw_fence.ops instead since it could be NULL if fence is not initialized. Reverse the condition since !=NULL check is discouraged in kernel. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 15:11:00 +0000