summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-10-03drm/i915: Fix watermark calculations for gen12+ RC CCS modifierVille Syrjälä
Take the gen12+ RC CCS modifier into account when calculating the watermarks. Othwerwise we'll calculate the watermarks thinking this Y-tiled modifier is linear. The rc_surface part is actually a nop since that is not used for any glk+ platform. v2: Split RC CCS vs. MC CCS to separate patches Cc: stable@vger.kernel.org Fixes: b3e57bccd68a ("drm/i915/tgl: Gen-12 render decompression") Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-2-ville.syrjala@linux.intel.com (cherry picked from commit a89a96a586114f67598c6391c75678b4dba5c2da) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-03drm/i915/psr: Fix PSR_IMR/IIR field handlingJouni Högander
Current PSR code is supposed to use TRANSCODER_EDP to force 0 shift for bits in PSR_IMR/IIR registers: /* * gen12+ has registers relative to transcoder and one per transcoder * using the same bit definition: handle it as TRANSCODER_EDP to force * 0 shift in bit definition */ At the time of writing the code assumption "TRANSCODER_EDP == 0" was made. This is not the case and all fields in PSR_IMR and PSR_IIR are shifted incorrectly if DISPLAY_VER >= 12. Fix this by adding separate register field defines for >=12 and add bit getter functions to keep code readability. v4: - Remove EDP from TGL definitions (José) - Use REG_BIT and REG_GENMASK (José) v3: - Add separate register field defines (José) - Add bit getter functions (José) v2: - Improve commit message (José) Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Fixes: 8241cfbe67f4 ("drm/i915/tgl: Access the right register when handling PSR interruptions") Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221003072011.72408-1-jouni.hogander@intel.com (cherry picked from commit 8da8e32e0b095613af2c2ce4b322240269164a8e) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-03drm/i915/ehl: Update MOCS table for EHLTejas Upadhyay
Add these extra EHL entries back since we have drm-tip commit 13d29c823738 ("drm/i915/ehl: unconditionally flush the pages on acquire") introduces proper flushing to make it work as expected. Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Fixes: 046091758b50 ("Revert "drm/i915/ehl: Update MOCS table for EHL"") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220930133223.2757282-1-tejas.upadhyay@intel.com (cherry picked from commit 6fa964c045a6bc3321a9186e87bfbcfd1059b0f1) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-10-03Merge tag 'm68k-for-v6.1-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Fix forward secrecy of RNG seed boot record handling - Make RNG seed boot record handling generic for all m68k platforms using bootinfo - defconfig updates - Minor fixes and improvements * tag 'm68k-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Rework BI_VIRT_RNG_SEED as BI_RNG_SEED m68k: Process bootinfo records before saving them m68k: defconfig: Update defconfigs for v6.0-rc2 m68k: Allow kexec on M68KCLASSIC with MMU enabled only m68k: Move from strlcpy with unused retval to strscpy
2022-10-03Merge tag 'mips_6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds
Pull MIPS updates from Thomas Bogendoerfer: - mainly cleanups - fix enabling interrupts on second VPE for Lantiq platform - switch to use gpiod API - allow firmware passing RND seed * tag 'mips_6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits) MIPS: pci: lantiq: switch to using gpiod API mips: allow firmware to pass RNG seed to kernel MIPS: Simplify __bswapdi2() and __bswapsi2() MIPS: Silence missing prototype warning mips: update config files MIPS: Lantiq: vmmc: fix compile break introduced by gpiod patch MIPS: IRQ: remove orphan allocate_irqno() declaration MIPS: remove orphan sb1250_time_init() declaration MIPS: Lantiq: switch vmmc to use gpiod API MIPS: lantiq: enable all hardware interrupts on second VPE MIPS: BCM47XX: Cast memcmp() of function to (void *) mips: ralink: convert to DEFINE_SHOW_ATTRIBUTE mips: kernel: convert to DEFINE_SHOW_ATTRIBUTE mips: cavium: convert to DEFINE_SHOW_ATTRIBUTE MIPS: AR7: remove orphan declarations from arch/mips/include/asm/mach-ar7/ar7.h MIPS: remove orphan sni_cpu_time_init() declaration MIPS: IRQ: remove orphan declarations from arch/mips/include/asm/irq.h MIPS: Octeon: remove orphan octeon_hal_setup_reserved32() declaration MIPS: Octeon: remove orphan cvmx_fpa_setup_pool() declaration MIPS: Octeon: remove orphan octeon_swiotlb declaration ...
2022-10-03tracing: Add Masami Hiramatsu as co-maintainerSteven Rostedt (Google)
Masami has been maintaining kprobes for a while now and that code has been an integral part of tracing. He has also been an excellent reviewer of all the tracing code and contributor as well. The tracing subsystem needs another active maintainer to keep it running smoothly, and I do not know anyone more qualified for the job than Masami. Ingo has also told me that he has not been active in the tracing code for some time and said he could be removed from the TRACING portion of the MAINTAINERS file. Link: https://lkml.kernel.org/r/20220930124131.7b6432dd@gandalf.local.home Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-10-03of: base: Shift refcount decrement in of_find_last_cache_level()Pierre Gondois
Currently, of_find_next_cache_node() and of_property_read_u32() are called on objects after their refcount have been decremented. Re-order the calls to decrement the refcount after the function calls. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Link: https://lore.kernel.org/r/20220930144936.2882481-1-pierre.gondois@arm.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-03tracing: Remove unused variable 'dups'Chen Zhongjin
Reported by Clang [-Wunused-but-set-variable] 'commit c193707dde77 ("tracing: Remove code which merges duplicates")' This commit removed the code which merges duplicates in detect_dups(), but forgot to delete the variable 'dups' which used to merge duplicates in the loop. Now only 'total_dups' is needed, remove 'dups' for clean code. Link: https://lkml.kernel.org/r/20220930103236.253985-1-chenzhongjin@huawei.com Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-10-03net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.cLorenzo Bianconi
Remove circular dependency between nf_nat module and nf_conntrack one moving bpf_ct_set_nat_info kfunc in nf_nat_bpf.c Fixes: 0fabd2aa199f ("net: netfilter: add bpf_ct_set_nat_info kfunc helper") Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Yauheni Kaliuta <ykaliuta@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/51a65513d2cda3eeb0754842e8025ab3966068d8.1664490511.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-03Documentation: bpf: Add implementation notes documentations to table of contentsBagas Sanjaya
Sphinx reported warnings on missing implementation notes documentations in the table of contents: Documentation/bpf/clang-notes.rst: WARNING: document isn't included in any toctree Documentation/bpf/linux-notes.rst: WARNING: document isn't included in any toctree Add these documentations to the table of contents (index.rst) of BPF documentation to fix the warnings. Link: https://lore.kernel.org/linux-doc/202210020749.yfgDZbRL-lkp@intel.com/ Fixes: 6c7aaffb24efbd ("bpf, docs: Move Clang notes to a separate file") Fixes: 6166da0a02cde2 ("bpf, docs: Move legacy packet instructions to a separate file") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20221002032022.24693-1-bagasdotme@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-03MAINTAINERS: add myself as a tracing reviewerMark Rutland
Since I'm actively involved in a number of arch bits that intersect ftrace (e.g. the actual arch implementation on arm64, stacktracing, entry management, and general instrumentation safety), add myself as a reviewer of the core ftrace code so that I have the change to catch any potential problems early. I spoke with Steven about this at LPC, and it seemed to make sense to add me as a reviewer. Link: https://lkml.kernel.org/r/20220928114621.248038-1-mark.rutland@arm.com Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-10-03irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmapVladimir Oltean
The irqchip->irq_set_type method is called by __irq_set_trigger() under the desc->lock raw spinlock. The ls-extirq implementation, ls_extirq_irq_set_type(), uses an MMIO regmap created by of_syscon_register(), which uses plain spinlocks (the kind that are sleepable on RT). Therefore, this is an invalid locking scheme for which we get a kernel splat stating just that ("[ BUG: Invalid wait context ]"), because the context in which the plain spinlock may sleep is atomic due to the raw spinlock. We need to go raw spinlocks all the way. Make this driver ioremap its INTPCR register on its own, and stop relying on syscon to provide a regmap. Fixes: 0dcd9f872769 ("irqchip: Add support for Layerscape external interrupt lines") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> [maz: trimmed down commit log] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220728144254.175385-1-vladimir.oltean@nxp.com
2022-10-03NFSv4/pNFS: Always return layout stats on layout return for flexfilesTrond Myklebust
We want to ensure that the server never misses the layout stats when we're closing the file, so that it knows whether or not to update its internal state. Otherwise, if we were racing with a layout stat, we might cause the server to invalidate its layout before the layout stat got processed. Fixes: 06946c6a3d8b ("pNFS/flexfiles: Only send layoutstats updates for mirrors that were updated") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-10-03NFS: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-10-03SUNRPC: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-10-03NFS: clean up a needless assignment in nfs_file_write()Lukas Bulwahn
Commit 064109db53ec ("NFS: remove redundant code in nfs_file_write()") identifies that filemap_fdatawait_range() will always return 0 and removes a dead error-handling case in nfs_file_write(). With this change however, assigning the return of filemap_fdatawait_range() to the result variable is a dead store. Remove this needless assignment. No functional change. No change in object code. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-10-03nfs: remove unnecessary (void*) conversions.yuzhe
remove unnecessary void* type castings. Signed-off-by: yuzhe <yuzhe@nfschina.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-10-03SUNRPC: use max_t() to simplify open codeZiyang Xuan
Use max_t() to simplify open code which uses "if...else" to get maximum of two values. Generated by coccinelle script: scripts/coccinelle/misc/minmax.cocci Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-10-03NFSv4: Directly use ida_alloc()/free()Bo Liu
Use ida_alloc()/ida_free() instead of ida_simple_get()/ida_simple_remove(). The latter is deprecated and more verbose. Signed-off-by: Bo Liu <liubo03@inspur.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-10-03SUNRPC: Directly use ida_alloc()/free()Bo Liu
Use ida_alloc()/ida_free() instead of ida_simple_get()/ida_simple_remove(). The latter is deprecated and more verbose. Signed-off-by: Bo Liu <liubo03@inspur.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-10-03dt-bindings: leds: Add MediaTek MT6370 flashlightAlice Chen
Add MediaTek MT6370 flashlight binding documentation. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alice Chen <alice_chen@richtek.com> Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Link: https://lore.kernel.org/r/5632ef04d7807f78259e4e9f3d952849a839a50c.1663926551.git.chiaen_wu@richtek.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-03dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicatorChiYuan Huang
Add MediaTek MT6370 current sink type LED indicator binding documentation. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Link: https://lore.kernel.org/r/27df85c30277a171ae85ff6d5b7d867625765d0a.1663926551.git.chiaen_wu@richtek.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-03dt-bindings: mailbox: Convert mtk-gce to DT schemaAngeloGioacchino Del Regno
Convert the mtk-gce mailbox binding to DT schema format. During the conversion, the examples for client device/mutex nodes were removed, as these are found in their respective bindings: arm/mediatek/mediatek,mmsys.yaml for "mediatek,mt8173-mmsys" soc/mediatek/mediatek,mutex.yaml for "mediatek,mt8173-disp-mutex" Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220921090006.37642-1-angelogioacchino.delregno@collabora.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-03Merge tag 'asoc-v6.1' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v6.1 This has been a very quiet release for the core but quite a busy one for drivers with a big crop of new drivers and lots of feature additions and fixes to existing ones: - A new string helper parse_int_array_user(). - Improvements to the SOF IPC4 code, especially around trace. - Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450 and Texas Instruments SRC4392 There is a conflict with the conversion of I2C remove functions to void in the cs42l42 driver which is fairly straightforward to resolve but should be highlighted to Linus.
2022-10-03Merge tag 'efi-next-for-v6.1' into loongarch-nextHuacai Chen
LoongArch architecture changes for 6.1 depend on the efi changes to work, so merge them to create a base.
2022-10-03once: add DO_ONCE_SLOW() for sleepable contextsEric Dumazet
Christophe Leroy reported a ~80ms latency spike happening at first TCP connect() time. This is because __inet_hash_connect() uses get_random_once() to populate a perturbation table which became quite big after commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16") get_random_once() uses DO_ONCE(), which block hard irqs for the duration of the operation. This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock for operations where we prefer to stay in process context. Then __inet_hash_connect() can use get_random_slow_once() to populate its perturbation table. Fixes: 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16") Fixes: 190cc82489f4 ("tcp: change source port randomizarion at connect() time") Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/netdev/CANn89iLAEYBaoYajy0Y9UmGFff5GPxDUoG-ErVB2jDdRNQ5Tug@mail.gmail.com/T/#t Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willy Tarreau <w@1wt.eu> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net/ieee802154: reject zero-sized raw_sendmsg()Tetsuo Handa
syzbot is hitting skb_assert_len() warning at raw_sendmsg() for ieee802154 socket. What commit dc633700f00f726e ("net/af_packet: check len when min_header_len equals to 0") does also applies to ieee802154 socket. Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4 Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com> Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: wwan: iosm: Call mutex_init before locking itMaxim Mikityanskiy
wwan_register_ops calls wwan_create_default_link, which ends up in the ipc_wwan_newlink callback that locks ipc_wwan->if_mutex. However, this mutex is not yet initialized by that point. Fix it by moving mutex_init above the wwan_register_ops call. This also makes the order of operations in ipc_wwan_init symmetric to ipc_wwan_deinit. Fixes: 83068395bbfc ("net: iosm: create default link via WWAN core") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03Merge branch 'octeontx2-macsec-offload'David S. Miller
Subbaraya Sundeep says: ==================== net: Introduce macsec hardware offload for cn10k platform CN10K-B and CNF10K-B variaints of CN10K silicon has macsec block(MCS) to encrypt and decrypt packets at MAC/hardware level. This block is a global resource with hardware resources like SecYs, SCs and SAs and is in between NIX block and RPM LMAC. CN10K-B silicon has only one MCS block which receives packets from all LMACS whereas CNF10K-B has seven MCS blocks for seven LMACs. Both MCS blocks are similar in operation except for few register offsets and some configurations require writing to different registers. This patchset introduces macsec hardware offloading support. AF driver manages hardware resources and PF driver consumes them when macsec hardware offloading is needed. Patch 1 adds basic pci driver for both CN10K-B and CNF10K-B silicons and initializes hardware block. Patches 2 and 3 adds mailboxes to init, reset and manage resources of the MCS block Patch 4 adds a low priority rule in MCS TCAM so that the traffic which do not need macsec processing can be sent/received Patch 5 adds macsec stats collection support Patch 6 adds interrupt handling support and any event in which AF consumer is interested can be notified via mbox notification Patch 7 adds debugfs support which helps in debugging packet path Patch 8 introduces macsec hardware offload feature for PF netdev driver. v3 changes: Fixed clang and sparse warnings v2 changes: Fix build error by changing #ifdef CONFIG_MACSEC to #if IS_ENABLED(CONFIG_MACSEC) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-pf: mcs: Introduce MACSEC hardware offloadingSubbaraya Sundeep
This patch introduces the macsec offload feature to cn10k PF netdev driver. The macsec offload ops like adding, deleting and updating SecYs, SCs, SAs and stats are supported. XPN support will be added in later patches. Some stats use same counter in hardware which means based on the SecY mode the same counter represents different stat. Hence when SecY mode/policy is changed then snapshot of current stats are captured. Also there is no provision to specify the unique flow-id/SCI per packet to hardware hence different mac address needs to be set for macsec interfaces. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Add debugfs supportGeetha sowjanya
This patch adds debugfs entry to dump MCS secy, sc, sa, flowid and port stats. This helps in debugging the packet path and to figure out where exactly packet was dropped. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Handle MCS block interruptsGeetha sowjanya
Hardware triggers an interrupt for events like PN wrap to zero, PN crosses set threshold. This interrupt is received by the MCS_AF. MCS AF then finds the PF/VF to which SA is mapped and notifies them using mcs_intr_notify mbox message. PF/VF using mcs_intr_cfg mbox can configure the list of interrupts for which they want to receive the notification from AF. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Support for stats collectionGeetha sowjanya
Add mailbox messages to return the resource stats to the caller. Stats of SecY, SC and SAs as per the macsec standard, TCAM flow id hits/miss, mailbox to clear the stats are implemented. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Install a default TCAM for normal trafficGeetha sowjanya
Out of all the TCAM entries, reserve last TX and RX TCAM flow entry(low priority) so that normal traffic can be sent out and received. The traffic which needs macsec processing hits the high priority TCAM flows. Also install a FLR handler to free the allocated resources for PF/VF. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Manage the MCS block hardware resourcesGeetha sowjanya
To establish a macsec connection association netdev driver needs hardware resources like SecY, TCAM flows, SCs and SAs. This patch manages allocating, freeing and configuring those resources. AF consumers can request resources and configure them via these mailbox messages. AF can allocate until it runs out of hardware resources. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: mcs: Add mailboxes for port related operationsGeetha sowjanya
There are set of configurations to be done at MCS port level like bringing port out of reset, making port as operational or bypass. This patch adds all the port related mailbox message handlers so that AF consumers can use them. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03octeontx2-af: cn10k: Introduce driver for macsec block.Geetha sowjanya
CN10K-B and CNF10K-B has macsec block(MCS) to encrypt and decrypt packets at MAC level. This block is a global resource with hardware resources like SecYs, SCs and SAs and is in between NIX block and RPM LMAC. CN10K-B silicon has only one MCS block which receives packets from all LMACS whereas CNF10K-B has seven MCS blocks for seven LMACs. Both MCS blocks are similar in operation except for few register offsets and some configurations require writing to different registers. Those differences between IPs are handled using separate ops. This patch adds basic driver and does the initial hardware calibration and parser configuration. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03eth: sp7021: fix use after free bug in spl2sw_nvmem_get_mac_addressZheng Wang
This frees "mac" and tries to display its address as part of the error message on the next line. Swap the order. Fixes: fd3040b9394c ("net: ethernet: Add driver for Sunplus SP7021") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03Merge branch 'lan966x-police-mirroring'David S. Miller
Horatiu Vultur says: ==================== net: lan966x: Add police and mirror using tc-matchall Add tc-matchall classifier offload support both for ingress and egress. For this add support for the port police and port mirroring action support. Port police can happen only on ingress while port mirroring is supported both on ingress and egress ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: lan966x: Add port mirroring support using tc-matchallHoratiu Vultur
Add support for port mirroring. It is possible to mirror only one port at a time and it is possible to have both ingress and egress mirroring. Frames injected by the CPU don't get egress mirrored because they are bypassing the analyzer module. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: lan966x: Add port police support using tc-matchallHoratiu Vultur
Add support for port police. It is possible to police only on the ingress side. To be able to add police support also it was required to add tc-matchall classifier offload support. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: fec: using page pool to manage RX buffersShenwei Wang
This patch optimizes the RX buffer management by using the page pool. The purpose for this change is to prepare for the following XDP support. The current driver uses one frame per page for easy management. Added __maybe_unused attribute to the following functions to avoid the compiling warning. Those functions will be removed by a separate patch once this page pool solution is accepted. - fec_enet_new_rxbdp - fec_enet_copybreak The following are the comparing result between page pool implementation and the original implementation (non page pool). --- small packet (64 bytes) testing are almost the same --- no matter what the implementation is --- on both i.MX8 and i.MX6SX platforms. shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 -l 64 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 39728 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 37.0 MBytes 311 Mbits/sec [ 1] 1.0000-2.0000 sec 36.6 MBytes 307 Mbits/sec [ 1] 2.0000-3.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 3.0000-4.0000 sec 37.1 MBytes 312 Mbits/sec [ 1] 4.0000-5.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 5.0000-6.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 6.0000-7.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 7.0000-8.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 0.0000-8.0943 sec 299 MBytes 310 Mbits/sec --- Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 43204 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 111 MBytes 933 Mbits/sec [ 1] 1.0000-2.0000 sec 111 MBytes 934 Mbits/sec [ 1] 2.0000-3.0000 sec 112 MBytes 935 Mbits/sec [ 1] 3.0000-4.0000 sec 111 MBytes 933 Mbits/sec [ 1] 4.0000-5.0000 sec 111 MBytes 934 Mbits/sec [ 1] 5.0000-6.0000 sec 111 MBytes 933 Mbits/sec [ 1] 6.0000-7.0000 sec 111 MBytes 931 Mbits/sec [ 1] 7.0000-8.0000 sec 112 MBytes 935 Mbits/sec [ 1] 8.0000-9.0000 sec 111 MBytes 933 Mbits/sec [ 1] 9.0000-10.0000 sec 112 MBytes 935 Mbits/sec [ 1] 0.0000-10.0077 sec 1.09 GBytes 933 Mbits/sec --- Non Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 49154 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 104 MBytes 868 Mbits/sec [ 1] 1.0000-2.0000 sec 105 MBytes 878 Mbits/sec [ 1] 2.0000-3.0000 sec 105 MBytes 881 Mbits/sec [ 1] 3.0000-4.0000 sec 105 MBytes 879 Mbits/sec [ 1] 4.0000-5.0000 sec 105 MBytes 878 Mbits/sec [ 1] 5.0000-6.0000 sec 105 MBytes 878 Mbits/sec [ 1] 6.0000-7.0000 sec 104 MBytes 875 Mbits/sec [ 1] 7.0000-8.0000 sec 104 MBytes 875 Mbits/sec [ 1] 8.0000-9.0000 sec 104 MBytes 873 Mbits/sec [ 1] 9.0000-10.0000 sec 104 MBytes 875 Mbits/sec [ 1] 0.0000-10.0073 sec 1.02 GBytes 875 Mbits/sec --- Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 57288 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 78.8 MBytes 661 Mbits/sec [ 1] 1.0000-2.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 2.0000-3.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 3.0000-4.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 4.0000-5.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 5.0000-6.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 6.0000-7.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 7.0000-8.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 8.0000-9.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 9.0000-9.5506 sec 45.0 MBytes 686 Mbits/sec [ 1] 0.0000-9.5506 sec 783 MBytes 688 Mbits/sec --- Non Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 36486 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 70.5 MBytes 591 Mbits/sec [ 1] 1.0000-2.0000 sec 64.5 MBytes 541 Mbits/sec [ 1] 2.0000-3.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 3.0000-4.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 4.0000-5.0000 sec 72.9 MBytes 611 Mbits/sec [ 1] 5.0000-6.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 6.0000-7.0000 sec 73.5 MBytes 617 Mbits/sec [ 1] 7.0000-8.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 8.0000-9.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 9.0000-10.0000 sec 73.9 MBytes 620 Mbits/sec [ 1] 0.0000-10.0174 sec 723 MBytes 605 Mbits/sec Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: Remove DECnet leftovers from flow.h.Guillaume Nault
DECnet was removed by commit 1202cdd66531 ("Remove DECnet support from kernel"). Let's also revome its flow structure. Compile-tested only (allmodconfig). Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03bnx2x: fix potential memory leak in bnx2x_tpa_stop()Jianglei Nie
bnx2x_tpa_stop() allocates a memory chunk from new_data with bnx2x_frag_alloc(). The new_data should be freed when gets some error. But when "pad + len > fp->rx_buf_size" is true, bnx2x_tpa_stop() returns without releasing the new_data, which will lead to a memory leak. We should free the new_data with bnx2x_frag_free() when "pad + len > fp->rx_buf_size" is true. Fixes: 07b0f00964def8af9321cfd6c4a7e84f6362f728 ("bnx2x: fix possible panic under memory stress") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03eth: lan743x: reject extts for non-pci11x1x devicesRaju Lakkaraju
Remove PTP_PF_EXTTS support for non-PCI11x1x devices since they do not support the PTP-IO Input event triggered timestamping mechanisms added Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)") Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03gro: add support of (hw)gro packets to gro stackCoco Li
Current GRO stack only supports incoming packets containing one frame/MSS. This patch changes GRO to accept packets that are already GRO. HW-GRO (aka RSC for some vendors) is very often limited in presence of interleaved packets. Linux SW GRO stack can complete the job and provide larger GRO packets, thus reducing rate of ACK packets and cpu overhead. This also means BIG TCP can still be used, even if HW-GRO/RSC was able to cook ~64 KB GRO packets. v2: fix logic in tcp_gro_receive() Only support TCP for the moment (Paolo) Co-Developed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Coco Li <lixiaoyan@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: prestera: acl: Add check for kmemdupJiasheng Jiang
As the kemdup could return NULL, it should be better to check the return value and return error if fails. Moreover, the return value of prestera_acl_ruleset_keymask_set() should be checked by cascade. Fixes: 604ba230902d ("net: prestera: flower template support") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Taras Chornyi<tchornyi@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03Merge branch 'mptcp-fastclose'David S. Miller
Mat Martineau says: ==================== mptcp: Fastclose edge cases and error handling MPTCP has existing code to use the MP_FASTCLOSE option header, which works like a RST for the MPTCP-level connection (regular RSTs only affect specific subflows in MPTCP). This series has some improvements for fastclose. Patch 1 aligns fastclose socket error handling with TCP RST behavior on TCP sockets. Patch 2 adds use of MP_FASTCLOSE in some more edge cases, like file descriptor close, FIN_WAIT timeout, and when the socket has unread data. Patch 3 updates the fastclose self tests. Patch 4 does not change any code, just fixes some outdated comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03mptcp: update misleading comments.Paolo Abeni
The MPTCP data path is quite complex and hard to understend even without some foggy comments referring to modified code and/or completely misleading from the beginning. Update a few of them to more accurately describing the current status. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03selftests: mptcp: update and extend fastclose test-casesPaolo Abeni
After the previous patches, the MPTCP protocol can generate fast-closes on both ends of the connection. Rework the relevant test-case to carefully trigger the fast-close code-path on a single end at the time, while ensuring than a predictable amount of data is spooled on both ends. Additionally add another test-cases for the passive socket fast-close. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-18 19:59:38 +0000