summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-10-02hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controllerOleksandr Shamray
Fix scale factors for reading MPS Multi-phase mp2888 controller. Fixed sensors: - PIN/POUT: based on vendor documentation, set bscale factor 0.5W/LSB - IOUT: based on vendor documentation, set scale factor 0.25 A/LSB Fixes: e4db7719d037 ("hwmon: (pmbus) Add support for MPS Multi-phase mp2888 controller") Signed-off-by: Oleksandr Shamray <oleksandrs@nvidia.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20220929121642.63051-1-oleksandrs@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-10-02dt-bindings: hwmon: sensirion,shtc1: Clean up spelling mistakes and grammarColin Ian King
The yaml text contains some minor spelling mistakes and grammar issues, clean these up. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220928213139.63819-1-colin.i.king@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-10-02hwmon: (nct6683) remove unused variable in nct6683_create_attr_groupZeng Heng
When enable 'unused-but-set-variable' compile warning option, it would raise warning as below: drivers/hwmon/nct6683.c:415:9: warning: variable 'j' set but not used [-Wunused-but-set-variable] Variable 'j' in nct6683_create_attr_group is unused, so remove it and simplify the 'for' loop. Signed-off-by: Zeng Heng <zengheng4@huawei.com> Link: https://lore.kernel.org/r/20220927114352.2498079-1-zengheng4@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-10-02dt-bindings: watchdog: migrate mt7621 text bindings to YAMLSergio Paracuellos
Soc Mt7621 Watchdog bindings used text format, so migrate them to YAML. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220926162549.805108-1-sergio.paracuellos@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: sp5100_tco: Add "action" module parameterVladimir Panteleev
Allow configuring the "action" bit, as documented in [1]. Previously, the only action supported by this module was to reset the system (0). It can now be configured to power off (1) instead. [1]: https://www.amd.com/system/files/TechDocs/44413.pdf Signed-off-by: Vladimir Panteleev <git@vladimir.panteleev.md> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220920092721.7686-1-git@vladimir.panteleev.md Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx93: add watchdog timer on imx93Alice Guo
The WDOG clocks are sourced from lpo_clk, and lpo_clk is the fixed 32KHz. TOVAL contains the 16-bit value used to set the timeout period of the watchdog. When the timeout period exceeds 2 seconds, the value written to the TOVAL register is larger than 16-bit can represent. Enabling watchdog prescaler can solve this problem. Two points need to be aware of: 1. watchdog prescaler enables a fixed 256 pre-scaling of watchdog counter reference clock 2. reconfiguration takes about 55ms on imx93 Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-8-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp_wdt: init wdog when it was activeJason Liu
Paired with suspend, we can only init wdog again when it was active and ping it once to avoid the watchdog timeout after it resumed. Signed-off-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Tested-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-7-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp_wdt: Handle wdog reconfigure failureYe Li
Current driver may meet reconfigure failure caused by below reasons: 1. The wdog on iMX7ULP has different behavior after RCS valid. It needs to wait more than 2.5 wdog clock for clock sync before next reconfiguration, while imx8ulp wdog does not need such delay. 2. After unlock, there is 128 bus clock window opened for reconfiguration, but on iMX8ULP, the HW can't guarantee the latency. So it is possible the window is closed before the writing arrives to wdog. 3. If the PRES is enabled, the RCS valid time becomes x256 to the time of PRES disabled. It is about 1715ms on iMX8ULP. So We have to increase the RCS timeout and can't wait it in IRQ disabled. The patch updates the driver to handle failures 1. Using different wait for unlock and RCS. Unlock valid time is very short and only related to bus clock. It must be in IRQ disabled to avoid being interrupted in 128 clock window. But for RCS time, it is longer and ok for IRQ enabled. 2. Add retry for any reconfigure failure with default 5 times. 3. Add "fsl,imx8ulp-wdt" compatile string for iMX8ULP and afterwards platform which don't need more 2.5 wdog clock after RCS valid. For imx7ulp, add post delay of 2.5 clock after RCS valid. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-6-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp_wdt: Fix RCS timeout issueYe Li
According to measure on i.MX7ULP and i.MX8ULP, the RCS done needs about 3400us and 6700us respectively. So current 20us timeout is not enough. When reconfiguring is on-going, unlock and configure CS will lead to unknown result. Increase the wait timeout value to 10ms and check the return value of RCS wait to fix the issue Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-5-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp_wdt: Check CMD32EN in wdog initYe Li
When bootloader has enabled the CMD32EN bit, switch to use 32bits unlock command to unlock the CS register. Using 32bits command will help on avoiding 16 bus cycle window violation for two 16 bits commands. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-4-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp: Add explict memory barrier for unlock sequenceJacky Bai
When reconfiguring the WDOG Timer of i.MX7ULP, there is a certain probability causes it to reset. The reason is that the CMD32EN of the WDOG Timer of i.MX7ULP is disabled in bootloader. The unlock sequence are two 16-bit writes to the CNT register within 16 bus clocks. Adding mb() is to guarantee that two 16-bit writes are finished within 16 bus clocks. Memory barriers cannot be added between these two 16-bit writes so that writel_relaxed is used. Suggested-by: Ye Li <ye.li@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-3-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: imx7ulp: Move suspend/resume to noirq phaseAnson Huang
The i.MX7ULP's watchdog is enabled by default when out of reset, so the resume callback which is to disable watchdog should be called earlier to avoid unexpected timeout, move suspend/resume callback to noirq phase. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Tested-by: Peter Chen <peter.chen@nxp.com> Tested-by: Li Jun <jun.li@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220825083256.14565-2-alice.guo@oss.nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: rti-wdt:using the pm_runtime_resume_and_get to simplify the codeye xingchen
Using pm_runtime_resume_and_get() to instade of pm_runtime_get_sync and pm_runtime_put_noidle. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220802074643.1648660-1-ye.xingchen@zte.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02dt-bindings: watchdog: rockchip: add rockchip,rk3128-wdtJohan Jonker
Add rockchip,rk3128-wdt compatible string. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/a4da79fe-3449-6538-742f-790835ffe43a@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: s3c2410_wdt: support exynosautov9 watchdogChanho Park
Like exynos850, exynosautov9 SoC also has two cpu watchdogs. Unfortunately, some configurations are slightly different so we need to add samsung,exynosautov9-wdt and separate drv data for those watchdogs. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220520121750.71473-3-chanho61.park@samsung.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02dt-bindings: watchdog: add exynosautov9 compatibleChanho Park
Adds "samsung,exynosautov9-wdt" to samsung-wdt compatible. This has two cpu watchdogs like exynos850. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220520121750.71473-2-chanho61.park@samsung.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: npcm: Enable clock if providedJonathan Neuschäfer
On the Nuvoton WPCM450 SoC, with its upcoming clock driver, peripheral clocks are individually gated and ungated. Therefore, the watchdog driver must be able to ungate the watchdog clock. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220610072141.347795-3-j.neuschaefer@gmx.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: meson: keep running if already activePhilippe Boos
If the watchdog is already running (e.g.: started by bootloader) then the kernel driver should keep the watchdog active but the amlogic driver turns it off. Let the driver fix the clock rate if already active because we do not know the previous timebase value. To avoid unintentional resetting we temporarily set it to its maximum value. Then keep the enable bit if is was previously active. Signed-off-by: Philippe Boos <pboos@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220801092150.4449-1-pboos@baylibre.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: dt-bindings: atmel,at91sam9-wdt: convert to json-schemaSergiu Moga
Convert at91sam9 WDT binding for Atmel/Microchip SoCs to json-schema format. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220714125122.144377-1-sergiu.moga@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: armada_37xx_wdt: Fix .set_timeout callbackPali Rohár
ioctl(WDIOC_SETTIMEOUT) calls .set_timeout and .ping callbacks and it is expected that it changes current watchdog timeout. armada_37xx_wdt's .ping callback just reping counter 0 and does not touch counter 1 used for timeout. So it is needed to set counter 1 to the new value in .set_timeout callback to ensure ioctl(WDIOC_SETTIMEOUT) functionality. Fix it. Fixes: 54e3d9b518c8 ("watchdog: Add support for Armada 37xx CPU watchdog") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20220726085612.10672-1-pali@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: sa1100: make variable sa1100dog_driver staticsunliming
This symbol is not used outside of sa1100_wdt.c, so marks it static. Fixes the following warning: >> drivers/watchdog/sa1100_wdt.c:241:24: sparse: sparse: symbol 'sa1100dog_driver' was not declared. Should it be static? Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: sunliming <sunliming@kylinos.cn> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220802020819.1226454-1-sunliming@kylinos.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: w83977f_wdt: Fix comment typoJason Wang
The double `we' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220802201109.6843-1-wangborong@cdjrlc.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: eurotechwdt: Remove redundant word in commentsshaomin Deng
There is a rebundant word "we" in comments, so remove it. Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220808153956.8374-1-dengshaomin@cdjrlc.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: Check dev_set_name() return valueBo Liu
It's possible that dev_set_name() returns -ENOMEM, catch and handle this. Signed-off-by: Bo Liu <liubo03@inspur.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220920020312.2383-1-liubo03@inspur.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: rzg2l_wdt: Add rzv2m supportPhil Edworthy
The WDT on RZ/V2M devices is basically the same as RZ/G2L, but without the parity error registers. This means the driver has to reset the hardware plus set the minimum timeout in order to do a restart and has a single interrupt. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220823093233.8577-3-phil.edworthy@renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02dt-bindings: watchdog: renesas,wdt: Add r9a09g011 (RZ/V2M) supportPhil Edworthy
Add the documentation for the r9a09g011 SoC, but in doing so also reorganise the doc to make it easier to read. Additionally, make the binding require an interrupt to be specified. Whilst the driver does not need an interrupt, all of the SoCs that use this binding actually provide one. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220823093233.8577-2-phil.edworthy@renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: ftwdt010_wdt: fix test for platform_get_irq() failureDan Carpenter
This code assumes that platform_get_irq() function returns zero on failure. In fact, platform_get_irq() never returns zero. It returns negative error codes or positive non-zero values on success. Fixes: eca10ae6000d ("watchdog: add driver for Cortina Gemini watchdog") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/YvTgRk/ABp62/hNA@kili Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02dt-bindings: watchdog: renesas-wdt: Add r8a779g0 supportThanh Quan
Document support for the Watchdog Timer (WDT) Controller in the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/e3a246be066d5e9c2231285bc1488fc12866cf5d.1662714387.git.geert+renesas@glider.be Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: Exar/MaxLinear XR28V38x driverDavid Müller
Simple driver for the watchdog present in some Exar/MaxLinear UART chips. Please see https://www.maxlinear.com/product/interface/uarts/lpc-uarts/xr28v384 for more info. Signed-off-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220914094605.93377-1-d.mueller@elsoft.ch Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: ftwdt010_wdt: implement _restart() functionSergei Antonov
Implement ftwdt010_wdt_restart(). It enables watchdog with timeout = 0 and disabled IRQ. Since it needs code similar to ftwdt010_wdt_start(), add a new function ftwdt010_enable() and move common code there. Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220829090436.452742-1-saproj@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: w83627hf_wdt: add bootstatus supportHenning Schild
The status bit in the status and control register can tell us whether the last reboot was caused by the watchdog. Make sure to take that into the bootstatus before clearing it. Signed-off-by: Henning Schild <henning.schild@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220824152448.7736-1-henning.schild@siemens.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02dt-bindings: watchdog: Convert Xilinx watchdog bindings to json-schemaSrinivas Neeli
Convert Xilinx watchdog bindings to DT schema format using json-schema Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220818150637.815-1-srinivas.neeli@xilinx.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: aspeed_wdt: Reorder output signal register configurationChin-Ting Kuo
If the output driving type is push-pull mode, the output polarity should be selected in advance. Otherwise, an unexpected value will be output at the moment of changing to push-pull mode. Thus, output polarity, WDT18[31], must be configured before changing driving type, WDT18[30]. Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Bonnie Lo <Bonnie_Lo@wiwynn.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220819094905.1962513-1-chin-ting_kuo@aspeedtech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog/hpwdt: Enable HP_WATCHDOG for ARM64 systems.Jerry Hoemann
Enable HP_WATCHDOG for ARM64 systems. HPWDT_NMI_DECODING requires X86 as NMI handlers are X86 specific. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220820202821.1263837-3-jerry.hoemann@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog/hpwdt: Include nmi.h only if CONFIG_HPWDT_NMI_DECODINGJerry Hoemann
Fixes: d48b0e173715 ("x86, nmi, drivers: Fix nmi splitup build bug") Arm64 does not support NMI and has no <asm/nmi.h>. Include <asm/nmi.h> only if CONFIG_HPWDT_NMI_DECODING is defined to avoid build failure on non-existent header file on Arm64. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220820202821.1263837-2-jerry.hoemann@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: wdat_wdt: Set the min and max timeout values properlyJean Delvare
The wdat_wdt driver is misusing the min_hw_heartbeat_ms field. This field should only be used when the hardware watchdog device should not be pinged more frequently than a specific period. The ACPI WDAT "Minimum Count" field, on the other hand, specifies the minimum timeout value that can be set. This corresponds to the min_timeout field in Linux's watchdog infrastructure. Setting min_hw_heartbeat_ms instead can cause pings to the hardware to be delayed when there is no reason for that, eventually leading to unexpected firing of the watchdog timer (and thus unexpected reboot). Since commit 6d72c7ac9fbe ("watchdog: wdat_wdt: Using the existing function to check parameter timeout"), min_timeout is being set too, but to the arbitrary value of 1 second, which doesn't make sense and allows setting timeout values lower that the ACPI WDAT "Minimum Count" field. I'm also changing max_hw_heartbeat_ms to max_timeout for symmetry, although the use of this one isn't fundamentally wrong, but there is also no reason to enable the software-driven ping mechanism for the wdat_wdt driver. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Fixes: 6d72c7ac9fbe ("watchdog: wdat_wdt: Using the existing function to check parameter timeout") Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Liu Xinpeng <liuxp11@chinatelecom.cn> Link: https://lore.kernel.org/r/20220823154713.023ee771@endymion.delvare Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02watchdog: bd9576_wdt: switch to using devm_fwnode_gpiod_get()Dmitry Torokhov
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node() so that gpiolib can be cleaned a bit, so let's switch to the generic fwnode property API. While at it, switch the rest of the calls to read properties in bd9576_wdt_probe() to the generic device property API as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-10-b29adfb27a6c@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02dt-bindings: watchdog: toshiba,visconti-wdt: Update the common clock propertiesNobuhiro Iwamatsu
The clock for this driver switched to the common clock controller driver. Therefore, update common clock properties for watchdog in the binding document. And this matched this example with the actual dts. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220525004605.2128727-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-10-02kallsyms: take the input file instead of reading stdinMasahiro Yamada
This gets rid of the pipe operator connected with 'cat'. Also use getopt_long() to parse the command line. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-10-02kallsyms: drop duplicated ignore patterns from kallsyms.cMasahiro Yamada
Now that kallsyms.c parses the output from mksysmap, some symbols have already been dropped. Move comments to scripts/mksysmap. Also, make the grep command readable. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-10-02kbuild: reuse mksysmap output for kallsymsMasahiro Yamada
scripts/mksysmap internally runs ${NM} (dropping some symbols). When CONFIG_KALLSYMS=y, mksysmap creates .tmp_System.map, but it is almost the same as the output from the ${NM} invocation in kallsyms(). It is true scripts/mksysmap drops some symbols, but scripts/kallsyms.c ignores more anyway. Keep the mksysmap output as *.syms, and reuse it for kallsyms and 'cmp -s'. It saves one ${NM} invocation. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-10-02mksysmap: update comment about __crc_*Masahiro Yamada
Since commit 7b4537199a4a ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS"), __crc_* symbols never become absolute. Keep ignoring __crc_*, but update the comment. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-10-02kbuild: remove head-y syntaxMasahiro Yamada
Kbuild puts the objects listed in head-y at the head of vmlinux. Conventionally, we do this for head*.S, which contains the kernel entry point. A counter approach is to control the section order by the linker script. Actually, the code marked as __HEAD goes into the ".head.text" section, which is placed before the normal ".text" section. I do not know if both of them are needed. From the build system perspective, head-y is not mandatory. If you can achieve the proper code placement by the linker script only, it would be cleaner. I collected the current head-y objects into head-object-list.txt. It is a whitelist. My hope is it will be reduced in the long run. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-10-02kbuild: use obj-y instead extra-y for objects placed at the headMasahiro Yamada
The objects placed at the head of vmlinux need special treatments: - arch/$(SRCARCH)/Makefile adds them to head-y in order to place them before other archives in the linker command line. - arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of obj-y to avoid them going into built-in.a. This commit gets rid of the latter. Create vmlinux.a to collect all the objects that are unconditionally linked to vmlinux. The objects listed in head-y are moved to the head of vmlinux.a by using 'ar m'. With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y for builtin objects. There is no *.o that is directly linked to vmlinux. Drop unneeded code in scripts/clang-tools/gen_compile_commands.py. $(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested by Nathan Chancellor [1]. [1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-10-02riscv: select HAVE_POSIX_CPU_TIMERS_TASK_WORKJisheng Zhang
Move POSIX CPU timer expiry and signal delivery into task context to allow PREEMPT_RT setups to coexist with KVM. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-10-02RISC-V: KVM: Use generic guest entry infrastructureJisheng Zhang
Use generic guest entry infrastructure to properly handle TIF_NOTIFY_RESUME. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-10-02RISC-V: KVM: Record number of signal exits as a vCPU statJisheng Zhang
Record a statistic indicating the number of times a vCPU has exited due to a pending signal. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <anup@brainfault.org
2022-10-02RISC-V: KVM: add __init annotation to riscv_kvm_init()Xiu Jianfeng
The riscv_kvm_init() is a module_init entry so let us add __init annotation to it. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-10-02RISC-V: KVM: Expose Zicbom to the guestAndrew Jones
Guests may use the cbo.inval,clean,flush instructions when the CPU has the Zicbom extension and the hypervisor sets henvcfg.CBIE (for cbo.inval) and henvcfg.CBCFE (for cbo.clean,flush). Add Zicbom support for KVM guests which may be enabled and disabled from KVM userspace using the ISA extension ONE_REG API. Also opportunistically switch the other isa extension checks in kvm_riscv_vcpu_update_config() to riscv_isa_extension_available(). Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org>
2022-10-02RISC-V: KVM: Provide UAPI for Zicbom block sizeAndrew Jones
We're about to allow guests to use the Zicbom extension. KVM userspace needs to know the cache block size in order to properly advertise it to the guest. Provide a virtual config register for userspace to get it with the GET_ONE_REG API, but setting it cannot be supported, so disallow SET_ONE_REG. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <anup@brainfault.org>
generated by cgit (git 2.34.1) at 2025-09-19 01:08:44 +0000