summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-18gianfar: Fix a filer bugSandeep Gopalpet
We need to enable filer whenever we need to use multiple RX queues. Also, need to program RIR0 register with the required distribution we require, if using RX filer hashing support for packet distribution to multiple queues. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18bnx2: fixing a timout error due not refreshing TX timers correctlyBreno Leitao
When running the following script on an active bnx2 interface: while(true); do ifconfig ethX mtu 9000; ifconfig ethX mtu 1500; done A timeout error appears and dumps the following stack: NETDEV WATCHDOG: eth4 (bnx2): transmit queue 0 timed out ------------[ cut here ]------------ Badness at net/sched/sch_generic.c:261 <snip> This patch just fixes the way that ->trans_start is refreshed. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18can/at91: don't check platform_get_irq's return value against zeroUwe Kleine-König
platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18mISDN: use DECLARE_COMPLETION_ONSTACK for non-constant completionYong Zhang
The _ONSTACK variant should be used for on-stack completion, otherwise it will break lockdep. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18bnx2: reset_task is crashing the kernel. Fixing it.Breno Leitao
If bnx2 schedules a reset via the reset_task, e.g., due to a TX timeout, it's possible for the NIC to be disabled with packets pending for transmit. In this case, napi_disable will loop forever, eventually crashing the kernel. This patch moves the disable of the device to after the napi_disable call. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18ipv6: fix an oops when force unload ipv6 moduleYang Hongyang
When I do an ipv6 module force unload,I got the following oops: #rmmod -f ipv6 ------------[ cut here ]------------ kernel BUG at mm/slub.c:2969! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/net/eth2/ifindex Modules linked in: ipv6(-) dm_multipath uinput ppdev tpm_tis tpm tpm_bios pcspkr pcnet32 mii parport_pc i2c_piix4 parport i2c_core floppy mptspi mptscsih mptbase scsi_transport_spi Pid: 2530, comm: rmmod Tainted: G R 2.6.32 #2 440BX Desktop Reference Platform/VMware Virtual Platform EIP: 0060:[<c04b73f2>] EFLAGS: 00010246 CPU: 0 EIP is at kfree+0x6a/0xdd EAX: 00000000 EBX: c09e86bc ECX: c043e4dd EDX: c14293e0 ESI: e141f1d8 EDI: e140fc31 EBP: dec58ef0 ESP: dec58ed0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process rmmod (pid: 2530, ti=dec58000 task=decb1940 task.ti=dec58000) Stack: c14293e0 00000282 df624240 c0897d08 c09e86bc c09e86bc e141f1d8 dec58f1c <0> dec58f00 e140fc31 c09e84c4 e141f1bc dec58f14 c0689d21 dec58f1c e141f1bc <0> 00000000 dec58f2c c0689eff c09e84d8 c09e84d8 e141f1bc bff33a90 dec58f38 Call Trace: [<e140fc31>] ? ipv6_frags_exit_net+0x22/0x32 [ipv6] [<c0689d21>] ? ops_exit_list+0x19/0x3d [<c0689eff>] ? unregister_pernet_operations+0x2a/0x51 [<c0689f70>] ? unregister_pernet_subsys+0x17/0x24 [<e140fbfe>] ? ipv6_frag_exit+0x21/0x32 [ipv6] [<e141a361>] ? inet6_exit+0x47/0x122 [ipv6] [<c045f5de>] ? sys_delete_module+0x198/0x1f6 [<c04a8acf>] ? remove_vma+0x57/0x5d [<c070f63f>] ? do_page_fault+0x2e7/0x315 [<c0403218>] ? sysenter_do_call+0x12/0x28 Code: 86 00 00 00 40 c1 e8 0c c1 e0 05 01 d0 89 45 e0 66 83 38 00 79 06 8b 40 0c 89 45 e0 8b 55 e0 8b 02 84 c0 78 14 66 a9 00 c0 75 04 <0f> 0b eb fe 8b 45 e0 e8 35 15 fe ff eb 5d 8b 45 04 8b 55 e0 89 EIP: [<c04b73f2>] kfree+0x6a/0xdd SS:ESP 0068:dec58ed0 ---[ end trace 4475d1a5b0afa7e5 ]--- It's because in ip6_frags_ns_sysctl_register, "table" only alloced when "net" is not equals to "init_net".So when we free "table" in ip6_frags_ns_sysctl_unregister,we should check this first. This patch fix the problem. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18TI DaVinci EMAC: Fix MDIO bus frequency configurationNageswari Srinivasan
There was a typo in "if condition" checking for validity of MDIO bus frequency passed as part of platform data. Bitwise AND was being used instead of a Logical AND. Tested on: DM6467 EVM Signed-off-by: Nageswari Srinivasan <nageswari@ti.com> Acked-by: Anant Gole <anantgole@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18e100: Fix broken cbs accounting due to missing memset.Roger Oksanen
Alan Stern noticed that e100 caused slab corruption. commit 98468efddb101f8a29af974101c17ba513b07be1 changed the allocation of cbs to use dma pools that don't return zeroed memory, especially the cb->status field used to track which cb to clean, causing (the visible) double freeing of skbs and a wrong free cbs count. Now the cbs are explicitly zeroed at allocation time. Reported-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Roger Oksanen <roger.oksanen@cs.helsinki.fi> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18broadcom: bcm54xx_shadow_read() errors ignored in bcm54xx_adjust_rxrefclk()Roel Kluin
If not signed read errors are ignored. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18e1000e: LED settings in EEPROM ignored on 82571 and 82572Bruce Allan
Do not override the customizable LED configuration set in the EEPROM. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18netxen: use module parameter correctlyStephen Hemminger
Netxen driver is doing this bogus thing to create a control file. This fails if device doesn't exist, and overall is a bad way to do the module parameter. Rather than fix borked code, just rewrite. Just using a writeable module parameter of 0/1 is the correct way Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18netns: fix net.ipv6.route.gc_min_interval_ms in netnsAlexey Dobriyan
sysctl table was copied, all right, but ->data for net.ipv6.route.gc_min_interval_ms was not reinitialized for "!= &init_net" case. In init_net everthing works by accident due to correct ->data initialization in source table. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18ocfs2: Set i_nlink properly during reflink.Tao Ma
We create a file in orphan dir for reflink so that if there is any error, we don't create any wrong dentry in the dir. But actually the file in orphan dir should be i_nlink = 0 so that it can be replayed and freed successfully. This patch first set i_nlink to 0 when creating the file in orphan dir and then set it to 1(reflink now only works for regular file) when we move it to the dest dir. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-12-18ocfs2: Add reflinked file's inode to inode hash eariler.Tao Ma
We used to add reflinked file's inode to inode hash when we add it to the dest dir. But actually there is a race. Consider the following sequence. 1. reflink happens and create the inode in orphan dir. 2. reflink thread is scheduled out because of some io. 3. recovery begins to work and calls ocfs2_recover_orphans. It calls ocfs2_iget and get a new inode and i_count = 1. It calls iput then and delete inode. the buffer's uptodate state is cleared. This patch move insert_inode_hash to the create function so that it can be found by step 3 and prevented from deleting because i_count > 1. This resolves the bug http://oss.oracle.com/bugzilla/show_bug.cgi?id=1183. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-12-18ALSA: AACI: switch to per-pcm lockingRussell King
We can use finer-grained locking, which makes things easier when we gain DMA support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: AACI: add double-rate supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_paramsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: AACI: cleanup aaci_pcm_hw_paramsRussell King
Since the recording and playback paths are now the same, eliminate the needless conditionals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: AACI: simplify codec rate informationRussell King
There's no need for a specific rule; ALSA's generic AC'97 support calculates the necessary rate constraint information itself, and we can use this directly. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: aaci - Fix a typoTakashi Iwai
Fixed a typo of the max buffer size specified for buffer allocation changed in the commit d6797322231af98b9bb4afb175dd614cf511e5f7. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18perf diff: Fix usage array, it must end with a NULL entryArnaldo Carvalho de Melo
Fixing this: [acme@doppio linux-2.6-tip]$ perf diff --hell Error: unknown option `hell' usage: perf diff [<options>] [old_file] [new_file] Segmentation fault [acme@doppio linux-2.6-tip]$ Also go over the other such arrays to check if they all were OK, they are, but there were some minor changes to do like making one static and renaming another to match the command it refers to. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261161358-23959-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-18watchdog: update geodewdt for new MFGPT APIAndres Salomon
Update to the new cs5535_mfgpt* API. The geode-specific wording should eventually be dropped from this driver... Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-18x86: Fix objdump version check in chkobjdump.awk for different formats.Masami Hiramatsu
Different version of objdump says its version in different way; GNU objdump 2.16.1 or GNU objdump version 2.19.51.0.14-1.fc11 20090722 This patch uses the first argument which starts with a number as version string. Changes in v2: - Remove unneeded increment. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <20091218154012.16960.5113.stgit@dhcp-100-2-132.bos.redhat.com> Suggested-by: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-18[S390] Use strim instead of strstrip to avoid false warnings.Heiko Carstens
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] qdio: add counter for input queue full conditionJan Glauber
Add a counter to the qdio performance statistics that indicates that no free buffers were left in the input queue. If the counter gets increased it means that the qdio adapter filled all available buffers and possibly had more buffers ready but could not transmit them. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] qdio: remove superfluous log entries and WARN_ONs.Jan Glauber
* Don't write debug feature log entries for sl, slsb and sbal since these elements can be located from the qdio_q pointer which is also logged. * Convert WARN_ON for wrong alignment of sbal to BUG_ON. * Remove WARN_ON's for wrong alignment of q / qib / slib since these alignments should be guaranteed by kmem_cache_alloc alignment / struct aligned attribute / __get_free_page. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] ptrace: dont abuse PT_PTRACEDOleg Nesterov
Nobody except ptrace itself should use task->ptrace or PT_PTRACED directly, change arch/s390/kernel/traps.c to use the helper. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] cio: fix channel path varyPeter Oberparleiter
Channel path vary is currently broken: channel paths which are varied offline are still used by Linux. The reason for this is that: * the path mask indicating which paths of an I/O device can be used is reset by each internal I/O request * the logic that checks if a path group is already in its designated target state incorrectly interprets the result "is correctly set" as "is correctly set and available" Fix this by resetting the path mask only for internal I/O requests which affect the path mask and by correcting the pgid check logic. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] drivers: Correct size given to memsetJulia Lawall
Memset should be given the size of the structure, not the size of the pointer. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T *x; expression E; @@ memset(x, E, sizeof( + * x)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] tape: Add pr_fmt() macro to all tape source filesMichael Holzheu
Without defining the pr_fmt() macro, the "tape: " prefix will not be printed when using the pr_xxx printk macros. This patch adds the missing definitions. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] rename NT_PRXSTATUS to NT_S390_HIGHREGSMartin Schwidefsky
The elf notes number for the upper register halves is s390 specific. Change the name of the elf notes to include S390. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] tty: PTR_ERR return of wrong pointer in fs3270_open()Roel Kluin
Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] s390: PTR_ERR return of wrong pointer in fallback_init_cip()Roel Kluin
Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] dasd: PTR_ERR return of wrong pointer inRoel Kluin
Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] dasd: move dasd-diag kmsg to dasdStefan Haberland
The DIAG discipline does not have a own driver name. It shows up as dasd-eckd or dasd-fba. So messages for dasd-diag are moved to the generic dasd part. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] cio: fix drvdata usage for the console subchannelSebastian Ott
Using dev_set_drvdata prior to device_register will force the driver core to kmalloc its private data. Since we use this for the console subchannel lets set the drvdata before taking the subchannels spinlock. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] wire up sys_recvmmsgHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18ARM: Kill CONFIG_CPU_32Russell King
26-bit ARM support was removed a long time ago, and this symbol has been defined to be 'y' ever since. As it's never disabled anymore, we can kill it without any side effects. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-18perf session: Make events_stats u64 to avoid overflow on 32-bit archesArnaldo Carvalho de Melo
Pekka Enberg reported weird percentages in perf report. It turns out we are overflowing a 32-bit variables in struct events_stats on 32-bit architectures. Before: [acme@ana linux-2.6-tip]$ perf report -i pekka.perf.data 2> /dev/null | head -10 281.96% Xorg b710a561 [.] 0x000000b710a561 140.15% Xorg [kernel] [k] __initramfs_end 51.56% metacity libgobject-2.0.so.0.2000.1 [.] 0x00000000026e46 35.12% evolution libcairo.so.2.10800.6 [.] 0x000000000203bd 33.84% metacity libpthread-2.9.so [.] 0x00000000007a3d After: [acme@ana linux-2.6-tip]$ perf report -i pekka.perf.data 2> /dev/null | head -10 30.04% Xorg b710a561 [.] 0x000000b710a561 14.93% Xorg [kernel] [k] __initramfs_end 5.49% metacity libgobject-2.0.so.0.2000.1 [.] 0x00000000026e46 3.74% evolution libcairo.so.2.10800.6 [.] 0x000000000203bd 3.61% metacity libpthread-2.9.so [.] 0x00000000007a3d Reported-by: Pekka Enberg <penberg@cs.helsinki.fi> Tested-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261148583-20395-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-18ARM: Convert VFP/Crunch/XscaleCP thread_release() to exit_thread()Russell King
This avoids races in the VFP code where the dead thread may have state on another CPU. By moving this code to exit_thread(), we will be running as the thread, and therefore be running on the current CPU. This means that we can ensure that the only local state is accessed in the thread notifiers. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-18ASoC: wm8974: fix a wrong bit definitionGuennadi Liakhovetski
The wm8974 datasheet defines BUFIOEN as bit 2. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-12-18hw-breakpoints: Fix hardware breakpoints -> perf events dependencyFrederic Weisbecker
The kbuild's select command doesn't propagate through the config dependencies. Hence the current rules of hardware breakpoint's config can't ensure perf can never be disabled under us. We have: config X86 selects HAVE_HW_BREAKPOINTS config HAVE_HW_BREAKPOINTS select PERF_EVENTS config PERF_EVENTS [...] x86 will select the breakpoints but that won't propagate to perf events. The user can still disable the latter, but it is necessary for the breakpoints. What we need is: - x86 selects HAVE_HW_BREAKPOINTS and PERF_EVENTS - HAVE_HW_BREAKPOINTS depends on PERF_EVENTS so that we ensure PERF_EVENTS is enabled and frozen for x86. This fixes the following kind of build errors: In file included from arch/x86/kernel/hw_breakpoint.c:31: include/linux/hw_breakpoint.h: In function 'hw_breakpoint_addr': include/linux/hw_breakpoint.h:39: error: 'struct perf_event' has no member named 'attr' v2: Select also ANON_INODES from x86, required for perf Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Reported-by: Michal Marek <mmarek@suse.cz> Reported-by: Andrew Randrianasulu <randrik_a@yahoo.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1261010034-7786-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-18ARM: 5853/1: ARM: Fix build break on ARM v6 and v7Anand Gadiyar
Commit 2c9b9c849 added an argument to __cpuc_flush_dcache_page and renamed it. Update a caller of the old function to fix this build error: CC arch/arm/mm/copypage-v6.o arch/arm/mm/copypage-v6.c: In function 'v6_copy_user_highpage_nonaliasing': arch/arm/mm/copypage-v6.c:51: error: implicit declaration of function '__cpuc_flush_dcache_page' make[1]: *** [arch/arm/mm/copypage-v6.o] Error 1 make: *** [arch/arm/mm] Error 2 Reported-by: Jinsung Yang <jsgood.yang@samsung.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-18sound: sgio2audio/pdaudiocf/usb-audio: initialize PCM bufferClemens Ladisch
When allocating the PCM buffer, use vmalloc_user() instead of vmalloc(). Otherwise, it would be possible for applications to play the previous contents of the kernel memory to the speakers, or to read it directly if the buffer is exported to userspace. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18cfq-iosched: Remove prio_change logic for workload selectionVivek Goyal
o CFQ now internally divides cfq queues in therr workload categories. sync-idle, sync-noidle and async. Which workload to run depends primarily on rb_key offset across three service trees. Which is a combination of mulitiple things including what time queue got queued on the service tree. There is one exception though. That is if we switched the prio class, say we served some RT tasks and again started serving BE class, then with-in BE class we always started with sync-noidle workload irrespective of rb_key offset in service trees. This can provide better latencies for sync-noidle workload in the presence of RT tasks. o This patch gets rid of that exception and which workload to run with-in class always depends on lowest rb_key across service trees. The reason being that now we have multiple BE class groups and if we always switch to sync-noidle workload with-in group, we can potentially starve a sync-idle workload with-in group. Same is true for async workload which will be in root group. Also the workload-switching with-in group will become very unpredictable as it now depends whether some RT workload was running in the system or not. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Acked-by: Corrado Zoccolo <czoccolo@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18cfq-iosched: Get rid of nr_groupsVivek Goyal
o Currently code does not seem to be using cfqd->nr_groups. Get rid of it. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18cfq-iosched: Remove the check for same cfq group from allow_mergeVivek Goyal
o allow_merge() already checks if submitting task is pointing to same cfqq as rq has been queued in. If everything is fine, we should not be having a task in one cgroup and having a pointer to cfqq in other cgroup. Well I guess in some situations it can happen and that is, when a random IO queue has been moved into root cgroup for group_isolation=0. In this case, tasks's cgroup/group is different from where actually cfqq is, but this is intentional and in this case merging should be allowed. The second situation is where due to close cooperator patches, multiple processes can be sharing a cfqq. If everything implemented right, we should not end up in a situation where tasks from different processes in different groups are sharing the same cfqq as we allow merging of cooperating queues only if they are in same group. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18drbd: fix test of unsigned in _drbd_fault_random()Roel Kluin
rsp->count is unsigned so the test does not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18block: remove Documentation/block/as-iosched.txtFUJITA Tomonori
Commit 492af6350a5ccf087e4964104a276ed358811458 removed the AS IO scheduler, so remove its documentation too. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-18ALSA: hda - Fix quirk for Maxdata obook4-1Takashi Iwai
Works fine with the auto-parser. Reference: Novell bnc#564940 https://bugzilla.novell.com/show_bug.cgi?id=564940 Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-16 12:58:35 +0000