summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-24Merge tag 'pm-5.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix problems related to frequency limits management in cpufreq that were introduced during the 5.3 cycle (when PM QoS had started to be used for that), fix a few issues in the OPP (operating performance points) library code and fix up the recently added haltpoll cpuidle driver. The cpufreq changes are somewhat bigger that I would like them to be at this stage of the cycle, but the problems fixed by them include crashes on boot and shutdown in some cases (among other things) and in my view it is better to address the root of the issue right away. Specifics: - Using device PM QoS of CPU devices for managing frequency limits in cpufreq does not work, so introduce frequency QoS (based on the original low-level PM QoS) for this purpose, switch cpufreq and related code over to using it and fix a race involving deferred updates of frequency limits on top of that (Rafael Wysocki, Sudeep Holla). - Avoid calling regulator_enable()/disable() from the OPP framework to avoid side-effects on boot-enabled regulators that may change their initial voltage due to performing initial voltage balancing without all restrictions from the consumers (Marek Szyprowski). - Avoid a kref management issue in the OPP library code and drop an incorrectly added lockdep_assert_held() from it (Viresh Kumar). - Make the recently added haltpoll cpuidle driver take the 'idle=' override into account as appropriate (Zhenzhong Duan)" * tag 'pm-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: opp: Reinitialize the list_kref before adding the static OPPs again cpufreq: Cancel policy update work scheduled before freeing cpuidle: haltpoll: Take 'idle=' override into account opp: core: Revert "add regulators enable and disable" PM: QoS: Drop frequency QoS types from device PM QoS cpufreq: Use per-policy frequency QoS PM: QoS: Introduce frequency QoS opp: of: drop incorrect lockdep_assert_held()
2019-10-24Merge tag 'gfs2-v5.4-rc4.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: "Fix a memory leak introduced in -rc1" * tag 'gfs2-v5.4-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix memory leak when gfs2meta's fs_context is freed
2019-10-24i2c: stm32f7: remove warning when compiling with W=1Alain Volmat
Remove the following warning: drivers/i2c/busses/i2c-stm32f7.c:315: warning: cannot understand function prototype: 'struct stm32f7_i2c_spec i2c_specs[] = Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: stm32f7: fix a race in slave mode with arbitration loss irqFabrice Gasnier
When in slave mode, an arbitration loss (ARLO) may be detected before the slave had a chance to detect the stop condition (STOPF in ISR). This is seen when two master + slave adapters switch their roles. It provokes the i2c bus to be stuck, busy as SCL line is stretched. - the I2C_SLAVE_STOP event is never generated due to STOPF flag is set but don't generate an irq (race with ARLO irq, STOPIE is masked). STOPF flag remains set until next master xfer (e.g. when STOPIE irq get unmasked). In this case, completion is generated too early: immediately upon new transfer request (then it doesn't send all data). - Some data get stuck in TXDR register. As a consequence, the controller stretches the SCL line: the bus gets busy until a future master transfer triggers the bus busy / recovery mechanism (this can take time... and may never happen at all) So choice is to let the STOPF being detected by the slave isr handler, to properly handle this stop condition. E.g. don't mask IRQs in error handler, when the slave is running. Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: stm32f7: fix first byte to send in slave modeFabrice Gasnier
The slave-interface documentation [1] states "the bus driver should transmit the first byte" upon I2C_SLAVE_READ_REQUESTED slave event: - 'val': backend returns first byte to be sent The driver currently ignores the 1st byte to send on this event. [1] https://www.kernel.org/doc/Documentation/i2c/slave-interface Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: mt65xx: fix NULL ptr dereferenceFabien Parent
Since commit abf4923e97c3 ("i2c: mediatek: disable zero-length transfers for mt8183"), there is a NULL pointer dereference for all the SoCs that don't have any quirk. mtk_i2c_functionality is not checking that the quirks pointer is not NULL before starting to use it. This commit add a call to i2c_check_quirks which will check whether the quirks pointer is set, and if so will check if the IP has the NO_ZERO_LEN quirk. Fixes: abf4923e97c3 ("i2c: mediatek: disable zero-length transfers for mt8183") Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Cengiz Can <cengiz@kernel.wtf> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Ulrich Hecht <uli@fpond.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24RDMA/nldev: Skip counter if port doesn't matchMark Zhang
The counter resource should return -EAGAIN if it was requested for a different port, this is similar to how QP works if the users provides a port filter. Otherwise port filtering in netlink will return broken counter nests. Fixes: c4ffee7c9bdb ("RDMA/netlink: Implement counter dumpit calback") Link: https://lore.kernel.org/r/20191020062800.8065-1-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-24irqchip/gic-v3-its: Use the exact ITSList for VMOVPZenghui Yu
On a system without Single VMOVP support (say GITS_TYPER.VMOVP == 0), we will map vPEs only on ITSs that will actually control interrupts for the given VM. And when moving a vPE, the VMOVP command will be issued only for those ITSs. But when issuing VMOVPs we seemed fail to present the exact ITSList to ITSs who are actually included in the synchronization operation. The its_list_map we're currently using includes all ITSs in the system, even though some of them don't have the corresponding vPE mapping at all. Introduce get_its_list() to get the per-VM its_list_map, to indicate which ITSs have vPE mappings for the given VM, and use this map as the expected ITSList when building VMOVP. This is hopefully a performance gain not to do some synchronization with those unsuspecting ITSs. And initialize the whole command descriptor to zero at beginning, since the seq_num and its_list should be RES0 when GITS_TYPER.VMOVP == 1. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1571802386-2680-1-git-send-email-yuzenghui@huawei.com
2019-10-24Merge branch 'net-aquantia-PTP-support-for-AQC-devices'David S. Miller
Igor Russkikh says: ==================== net: aquantia: PTP support for AQC devices This patchset introduces PTP feature support in Aquantia AQC atlantic driver. This implementation is a joined effort of aquantia developers: Egor is the main designer and driver/firmware architect on PTP, Sergey and Dmitry are included as co-developers. Dmitry also helped me in the overall patchset preparations. Feature was verified on AQC hardware with testptp tool, linuxptp, gptp and with Motu hardware unit. version3 updates: - Review comments applied: error handling, various fixes version2 updates: - Fixing issues from Andrew's review: replacing self with ptp var name, making ptp_clk_offset a field in the ptp instance. devm_kzalloc advice is actually non applicable, because ptp object gets created/destroyed on each network device close/open and it should not be linked with dev lifecycle. - Rearranging commit authorship, adding Egor as a ptp module main maintainer - Fixing kbuild 32bit division issues ==================== Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: adding atlantic ptp maintainerIgor Russkikh
PTP implementation is designed and maintained by Egor Pomozov, adding him as this module maintainer. Egor is the author of the core functionality and the architect, and is to be contacted for all Aquantia PTP/AVB functionality. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: add support for PIN funcsDmitry Bezrukov
Depending on FW configuration we can manage from 0 to 3 PINs for periodic output and from 0 to 1 ext ts PIN for getting TS for external event. Ext TS PIN functionality is implemented via periodic timestamps polling directly from PHY, because right now there is now way to receive the PIN trigger interrupt from phy. The polling interval is 15 milliseconds. Co-developed-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: add support for Phy accessDmitry Bezrukov
GPIO PIN control and access is done by direct phy manipulation. Here we add an aq_phy module which is able to access phy registers via MDIO access mailbox. Access is controlled via HW semaphore. Co-developed-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: implement get_ts_info ethtoolEgor Pomozov
Ethtool callback with basic information on what PTP features are supported by the device. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: add support for ptp ioctlsEgor Pomozov
Here we add support for PTP specific IOCTLs of HW timestamp get/set. These will use filters to configure flows onto the required queue ids. Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: rx filters for ptpDmitry Bezrukov
We implement HW filter reservation for PTP traffic. Special location in filters table is marked as reserved, because incoming ptp traffic should be directed only to PTP designated queue. This way HW will do PTP timestamping and proper processing. Co-developed-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: implement data PTP datapathEgor Pomozov
Here we do alloc/free IRQs for PTP rings. We also implement processing of PTP packets on TX and RX sides. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: styling fixes on ptp related functionsDmitry Bezrukov
Checkpatch and styling fixes on parts of code touched by ptp Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: add PTP rings infrastructureEgor Pomozov
Add implementations of PTP rings alloc/free. PTP desing on this device uses two separate rings on a separate traffic class for traffic rx/tx. Third ring (hwts) is not a traffic ring, but is used only to receive timestamps of the transmitted packets. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: add basic ptp_clock callbacksEgor Pomozov
Basic HW functions implemented for adjusting frequency, adjusting time, getting and setting time. With these callbacks we now do register ptp clock in the system. Firmware interface parts are defined for PTP requests and interactions. Enable/disable PTP counters in HW on clock register/unregister. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: unify styling of bit enumsDmitry Bezrukov
Make some other bit-enums more clear about positioning, this helps on debugging and development Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: PTP skeleton declarations and callbacksEgor Pomozov
Here we add basic function for PTP clock register/unregister. We also declare FW/HW capability bits used to control PTP feature on device. PTP device is created if network card has appropriate FW that has PTP enabled in config. HW supports timestamping for PTPv2 802.AS1 and PTPv2 IPv4 UDP packets. It also supports basic PTP callbacks for getting/setting time, adjusting frequency and time as well. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24gfs2: Fix memory leak when gfs2meta's fs_context is freedAndrew Price
gfs2 and gfs2meta share an ->init_fs_context function which allocates an args structure stored in fc->fs_private. gfs2 registers a ->free function to free this memory when the fs_context is cleaned up, but there was not one registered for gfs2meta, causing a leak. Register a ->free function for gfs2meta. The existing gfs2_fc_free function does what we need. Reported-by: syzbot+c2fdfd2b783754878fb6@syzkaller.appspotmail.com Fixes: 1f52aa08d12f ("gfs2: Convert gfs2 to fs_context") Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-10-24Merge branches 'pm-cpuidle' and 'pm-opp'Rafael J. Wysocki
* pm-cpuidle: cpuidle: haltpoll: Take 'idle=' override into account * pm-opp: opp: Reinitialize the list_kref before adding the static OPPs again opp: core: Revert "add regulators enable and disable" opp: of: drop incorrect lockdep_assert_held()
2019-10-24ALSA: hda/realtek - Fix 2 front mics of codec 0x623Aaron Ma
These 2 ThinkCentres installed a new realtek codec ID 0x623, it has 2 front mics with the same location on pin 0x18 and 0x19. Apply fixup ALC283_FIXUP_HEADSET_MIC to change 1 front mic location to right, then pulseaudio can handle them. One "Front Mic" and one "Mic" will be shown, and audio output works fine. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191024114439.31522-1-aaron.ma@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-24ALSA: hda/realtek - Add support for ALC623Kailang Yang
Support new codec ALC623. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ed97b6a8bd9445ecb48bc763d9aaba7a@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-24ALSA: usb-audio: Add DSD support for Gustard U16/X26 USB InterfaceJustin Song
This patch adds native DSD support for Gustard U16/X26 USB Interface. Tested using VID and fp->dsd_raw method. Signed-off-by: Justin Song <flyingecar@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CA+9XP1ipsFn+r3bCBKRinQv-JrJ+EHOGBdZWZoMwxFv0R8Y1MQ@mail.gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-24netfilter: nft_payload: fix missing check for matching length in offloadswenxu
Payload offload rule should also check the length of the match. Moreover, check for unsupported link-layer fields: nft --debug=netlink add rule firewall zones vlan id 100 ... [ payload load 2b @ link header + 0 => reg 1 ] this loads 2byte base on ll header and offset 0. This also fixes unsupported raw payload match. Fixes: 92ad6325cb89 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-10-24Merge tag 'mfd-fixes-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fix from Lee Jones: "Fix broken support for BananaPi-r2" * tag 'mfd-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: mt6397: Fix probe after changing mt6397-core
2019-10-24Merge tag 'sound-5.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This is a usual small bump in the middle, we've got a set of ASoC fixes in this week as shown in diffstat. The only change in the core stuff is about (somewhat minor) PCM debugfs error handling. The major changes are rather for Intel SOF and topology coverage, as well as other platform (rockchip, samsung, stm) and codec fixes. As non-ASoC changes, a couple of new HD-audio chip fixes and a typo correction of USB-audio driver validation code are found" * tag 'sound-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits) ALSA: hda: Add Tigerlake/Jasperlake PCI ID ALSA: usb-audio: Fix copy&paste error in the validator ALSA: hda/realtek - Add support for ALC711 ASoC: SOF: control: return true when kcontrol values change ASoC: stm32: sai: fix sysclk management on shutdown ASoC: Intel: sof-rt5682: add a check for devm_clk_get ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting ASoC: simple_card_utils.h: Fix potential multiple redefinition error ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2 ASoC: core: Fix pcm code debugfs error ASoc: rockchip: i2s: Fix RPM imbalance ASoC: wm_adsp: Don't generate kcontrols without READ flags ASoC: intel: bytcr_rt5651: add null check to support_button_press ASoC: intel: sof_rt5682: add remove function to disable jack ASoC: rt5682: add NULL handler to set_jack function ASoC: intel: sof_rt5682: use separate route map for dmic ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture ASoC: SOF: Intel: initialise and verify FW crash dump data. ASoC: SOF: Intel: hda: fix warnings during FW load ASoC: SOF: pcm: harden PCM STOP sequence ...
2019-10-24ipvs: move old_secure_tcp into struct netns_ipvsEric Dumazet
syzbot reported the following issue : BUG: KCSAN: data-race in update_defense_level / update_defense_level read to 0xffffffff861a6260 of 4 bytes by task 3006 on cpu 1: update_defense_level+0x621/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:177 defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 write to 0xffffffff861a6260 of 4 bytes by task 7333 on cpu 0: update_defense_level+0xa62/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:205 defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 7333 Comm: kworker/0:5 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events defense_work_handler Indeed, old_secure_tcp is currently a static variable, while it needs to be a per netns variable. Fixes: a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2019-10-24ipvs: don't ignore errors in case refcounting ip_vs module failsDavide Caratti
if the IPVS module is removed while the sync daemon is starting, there is a small gap where try_module_get() might fail getting the refcount inside ip_vs_use_count_inc(). Then, the refcounts of IPVS module are unbalanced, and the subsequent call to stop_sync_thread() causes the following splat: WARNING: CPU: 0 PID: 4013 at kernel/module.c:1146 module_put.part.44+0x15b/0x290 Modules linked in: ip_vs(-) nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul ext4 mbcache jbd2 ghash_clmulni_intel snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev pcspkr snd_timer virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net net_failover virtio_blk failover virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ata_piix ttm crc32c_intel serio_raw drm virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nf_defrag_ipv6] CPU: 0 PID: 4013 Comm: modprobe Tainted: G W 5.4.0-rc1.upstream+ #741 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:module_put.part.44+0x15b/0x290 Code: 04 25 28 00 00 00 0f 85 18 01 00 00 48 83 c4 68 5b 5d 41 5c 41 5d 41 5e 41 5f c3 89 44 24 28 83 e8 01 89 c5 0f 89 57 ff ff ff <0f> 0b e9 78 ff ff ff 65 8b 1d 67 83 26 4a 89 db be 08 00 00 00 48 RSP: 0018:ffff888050607c78 EFLAGS: 00010297 RAX: 0000000000000003 RBX: ffffffffc1420590 RCX: ffffffffb5db0ef9 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffc1420590 RBP: 00000000ffffffff R08: fffffbfff82840b3 R09: fffffbfff82840b3 R10: 0000000000000001 R11: fffffbfff82840b2 R12: 1ffff1100a0c0f90 R13: ffffffffc1420200 R14: ffff88804f533300 R15: ffff88804f533ca0 FS: 00007f8ea9720740(0000) GS:ffff888053800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3245abe000 CR3: 000000004c28a006 CR4: 00000000001606f0 Call Trace: stop_sync_thread+0x3a3/0x7c0 [ip_vs] ip_vs_sync_net_cleanup+0x13/0x50 [ip_vs] ops_exit_list.isra.5+0x94/0x140 unregister_pernet_operations+0x29d/0x460 unregister_pernet_device+0x26/0x60 ip_vs_cleanup+0x11/0x38 [ip_vs] __x64_sys_delete_module+0x2d5/0x400 do_syscall_64+0xa5/0x4e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f8ea8bf0db7 Code: 73 01 c3 48 8b 0d b9 80 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 80 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffcd38d2fe8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000002436240 RCX: 00007f8ea8bf0db7 RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00000000024362a8 RBP: 0000000000000000 R08: 00007f8ea8eba060 R09: 00007f8ea8c658a0 R10: 00007ffcd38d2a60 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000000000001 R14: 00000000024362a8 R15: 0000000000000000 irq event stamp: 4538 hardirqs last enabled at (4537): [<ffffffffb6193dde>] quarantine_put+0x9e/0x170 hardirqs last disabled at (4538): [<ffffffffb5a0556a>] trace_hardirqs_off_thunk+0x1a/0x20 softirqs last enabled at (4522): [<ffffffffb6f8ebe9>] sk_common_release+0x169/0x2d0 softirqs last disabled at (4520): [<ffffffffb6f8eb3e>] sk_common_release+0xbe/0x2d0 Check the return value of ip_vs_use_count_inc() and let its caller return proper error. Inside do_ip_vs_set_ctl() the module is already refcounted, we don't need refcount/derefcount there. Finally, in register_ip_vs_app() and start_sync_thread(), take the module refcount earlier and ensure it's released in the error path. Change since v1: - better return values in case of failure of ip_vs_use_count_inc(), thanks to Julian Anastasov - no need to increase/decrease the module refcount in ip_vs_set_ctl(), thanks to Julian Anastasov Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2019-10-24mfd: mt6397: Fix probe after changing mt6397-coreFrank Wunderlich
Part 3 from this series [1] was not merged due to wrong splitting and breaks mt6323 pmic on bananapi-r2 dmesg prints this line and at least switch is not initialized on bananapi-r2 mt6397 1000d000.pwrap:mt6323: unsupported chip: 0x0 this patch contains only the probe-changes and chip_data structs from original part 3 by Hsin-Hsiung Wang [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=164155 Fixes: a4872e80ce7d ("mfd: mt6397: Extract IRQ related code from core driver") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-24rtl8xxxu: fix warnings for symbol not declaredChris Chiu
Fix the following sparse warnings. sparse: symbol 'rtl8723bu_set_coex_with_type' was not declared. Should it be static? sparse: symbol 'rtl8723bu_update_bt_link_info' was not declared. Should it be static? sparse: symbol 'rtl8723bu_handle_bt_inquiry' was not declared. Should it be static? sparse: symbol 'rtl8723bu_handle_bt_info' was not declared. Should it be static? Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtl8xxxu: remove set but not used variable 'rate_mask'YueHaibing
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:4484:6: warning: variable rate_mask set but not used [-Wunused-but-set-variable] It is never used since commit a9bb0b515778 ("rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24atmel: remove set but not used variable 'dev'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/atmel/atmel_cs.c:120:21: warning: variable dev set but not used [-Wunused-but-set-variable] It is never used, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24adm80211: remove set but not used variables 'mem_addr' and 'io_addr'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/admtek/adm8211.c:1784:16: warning: variable mem_addr set but not used [-Wunused-but-set-variable] drivers/net/wireless/admtek/adm8211.c:1785:15: warning: variable io_addr set but not used [-Wunused-but-set-variable] They are never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtlwifi: Remove unnecessary NULL check in rtl_regd_initNathan Chancellor
When building with Clang + -Wtautological-pointer-compare: drivers/net/wireless/realtek/rtlwifi/regd.c:389:33: warning: comparison of address of 'rtlpriv->regd' equal to a null pointer is always false [-Wtautological-pointer-compare] if (wiphy == NULL || &rtlpriv->regd == NULL) ~~~~~~~~~^~~~ ~~~~ 1 warning generated. The address of an array member is never NULL unless it is the first struct member so remove the unnecessary check. This was addressed in the staging version of the driver in commit f986978b32b3 ("Staging: rtlwifi: remove unnecessary NULL check"). While we are here, fix the following checkpatch warning: CHECK: Comparison to NULL could be written "!wiphy" 35: FILE: drivers/net/wireless/realtek/rtlwifi/regd.c:389: + if (wiphy == NULL) Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Link:https://github.com/ClangBuiltLinux/linux/issues/750 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: add phy_info debugfs to show Tx/Rx physical statusTsang-Shian Lin
This commit adds several Tx/Rx physical information to phy_info debugfs for 8822B/8822C. By this debugfs, we can know physical information, such as Tx/Rx rate, RSSI, EVM,SNR, etc. The information is gotten from the packets of Tx/Rx path. It has no impact for the performance of 8822B/8822C. In the fields, we may meet different kinds of problems, but we may have no professional instrument to check them. At this moment, this debugfs is a good tool, and it may provide useful information for debug. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: add set_bitrate_mask supportTzu-En Huang
Support setting bit rate from upper layer. After configuring the original rate control result in the driver, the result is then masked by the bit rate mask received from the ops set_bitrate_mask. Lastly, the masked result will be sent to firmware. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: Enable 802.11ac beamformee supportTzu-En Huang
Enable MU-MIMO transmit beamformee support for chipset 8822b and 8822c. If the driver is in station mode and associated with an AP, and the capabilities of both meet the requirement of beamforming, driver will run as a beamformee and the corresponding chip settings will be set. In addition, module parameter support_bf is added to enable or disable beamforming. Sometimes driver will need to disable for inter-operate issues, and it would be easier for driver to debug. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: add power tracking supportTzu-En Huang
The temperature of the chip can affect the output power of the RF components. Hence driver requires to compensate the power by adjusting the power index recorded in the power swing table. And if the difference of current thermal value to the default thermal value exceeds a threshold, the RF IQK should be triggered to re-calibrate the characteristics of the RF components, to keep the output IQ vectors of the RF components orthogonal enough. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: use macro to check the current bandYan-Hsuan Chuang
Add macros to see which band we are, based on the current channel. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24bcma: fix block comment styleYadav Lamichhane
Fix a coding style issue. Signed-off-by: Yadav Lamichhane <tuxomega1@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flagMartin Fuzzey
The LAN8740, like the 8720, also requires a reset after enabling clock. The datasheet [1] 3.8.5.1 says: "During a Hardware reset, an external clock must be supplied to the XTAL1/CLKIN signal." I have observed this issue on a custom i.MX6 based board with the LAN8740A. [1] http://ww1.microchip.com/downloads/en/DeviceDoc/8740a.pdf Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23net: lan78xx: remove set but not used variable 'event'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/usb/lan78xx.c:3995:6: warning: variable event set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23Merge branch 'mlxsw-Update-main-pool-computation-and-pool-size-limits'David S. Miller
Ido Schimmel says: ==================== mlxsw: Update main pool computation and pool size limits Petr says: In Spectrum ASICs, the shared buffer is an area of memory where packets are kept until they can be transmitted. There are two resources associated with shared buffer size: cap_total_buffer_size and cap_guaranteed_shared_buffer. So far, mlxsw has been using the former as a limit when validating shared buffer pool size configuration. However, the total size also includes headrooms and reserved space, which really cannot be used for shared buffer pools. Patch #1 mends this and has mlxsw use the guaranteed size. To configure default pool sizes, mlxsw has historically hard-coded one or two smallish pools, and one "main" pool that took most of the shared buffer (that would be pool 0 on ingress and pool 4 on egress). During the development of Spectrum-2, it became clear that the shared buffer size keeps shrinking as bugs are identified and worked around. In order to prevent having to tweak the size of pools 0 and 4 to catch up with updates to values reported by the FW, patch #2 changes the way these pools are set. Instead of hard-coding a fixed value, the main pool now takes whatever is left from the guaranteed size after the smaller pool(s) are taken into account. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23mlxsw: spectrum_buffers: Calculate the size of the main poolPetr Machata
Instead of hard-coding the size of the largest pool, calculate it from the reported guaranteed shared buffer size and sizes of other pools (currently only the CPU port pool). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23mlxsw: spectrum: Use guaranteed buffer size as pool size limitPetr Machata
There are two resources associated with shared buffer size: cap_total_buffer_size, and cap_guaranteed_shared_buffer. So far, mlxsw has been using the former as a limit to determine how large a pool size is allowed to be. However, the total size also includes headrooms and reserved space, which really cannot be used for shared buffer pools. Therefore convert mlxsw to use the latter resource as a limit. Adjust hard-coded pool sizes to be the guaranteed size minus 256000 bytes for CPU port pool. On Spectrum-1 that actually leads to an increase. A follow-up patch will have this size calculated automatically. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23MIPS: tlbex: Fix build_restore_pagemask KScratch restorePaul Burton
build_restore_pagemask() will restore the value of register $1/$at when its restore_scratch argument is non-zero, and aims to do so by filling a branch delay slot. Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") added an EHB instruction (Execution Hazard Barrier) prior to restoring $1 from a KScratch register, in order to resolve a hazard that can result in stale values of the KScratch register being observed. In particular, P-class CPUs from MIPS with out of order execution pipelines such as the P5600 & P6600 are affected. Unfortunately this EHB instruction was inserted in the branch delay slot causing the MFC0 instruction which performs the restoration to no longer execute along with the branch. The result is that the $1 register isn't actually restored, ie. the TLB refill exception handler clobbers it - which is exactly the problem the EHB is meant to avoid for the P-class CPUs. Similarly build_get_pgd_vmalloc() will restore the value of $1/$at when its mode argument equals refill_scratch, and suffers from the same problem. Fix this by in both cases moving the EHB earlier in the emitted code. There's no reason it needs to immediately precede the MFC0 - it simply needs to be between the MTC0 & MFC0. This bug only affects Cavium Octeon systems which use build_fast_tlb_refill_handler(). Signed-off-by: Paul Burton <paulburton@kernel.org> Fixes: 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") Cc: Dmitry Korotin <dkorotin@wavecomp.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-10-23io_uring: correct timeout req sequence when inserting a new entryzhangyi (F)
The sequence number of the timeout req (req->sequence) indicate the expected completion request. Because of each timeout req consume a sequence number, so the sequence of each timeout req on the timeout list shouldn't be the same. But now, we may get the same number (also incorrect) if we insert a new entry before the last one, such as submit such two timeout reqs on a new ring instance below. req->sequence req_1 (count = 2): 2 req_2 (count = 1): 2 Then, if we submit a nop req, req_2 will still timeout even the nop req finished. This patch fix this problem by adjust the sequence number of each reordered reqs when inserting a new entry. Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-14 15:06:03 +0000