summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-16x86/hyperv: Fix hv_get/set_register for nested bringupNuno Das Neves
hv_get_nested_reg only translates SINT0, resulting in the wrong sint being registered by nested vmbus. Fix the issue with new utility function hv_is_sint_reg. While at it, improve clarity of hv_set_non_nested_register and hv_is_synic_reg. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Jinank Jain <jinankjain@linux.microsoft.com> Link: https://lore.kernel.org/r/1675980172-6851-1-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-02-16Merge tag 'usb-serial-6.3-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 6.3-rc1 Here are the USB-serial updates for 6.3-rc1; just a new modem device id this time. All have been in linux-next with no reported issues. * tag 'usb-serial-6.3-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add support for VW/Skoda "Carstick LTE"
2023-02-16Merge branch 'for-linus' into for-nextTakashi Iwai
Pull the pending fixes for 6.3 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-02-16iommu/vt-d: Allow to use flush-queue when first level is defaultTina Zhang
Commit 29b32839725f ("iommu/vt-d: Do not use flush-queue when caching-mode is on") forced default domains to be strict mode as long as IOMMU caching-mode is flagged. The reason for doing this is that when vIOMMU uses VT-d caching mode to synchronize shadowing page tables, the strict mode shows better performance. However, this optimization is orthogonal to the first-level page table because the Intel VT-d architecture does not define the caching mode of the first-level page table. Refer to VT-d spec, section 6.1, "When the CM field is reported as Set, any software updates to remapping structures other than first-stage mapping (including updates to not- present entries or present entries whose programming resulted in translation faults) requires explicit invalidation of the caches." Exclude the first-level page table from this optimization. Generally using first-stage translation in vIOMMU implies nested translation enabled in the physical IOMMU. In this case the first-stage page table is wholly captured by the guest. The vIOMMU only needs to transfer the cache invalidations on vIOMMU to the physical IOMMU. Forcing the default domain to strict mode will cause more frequent cache invalidations, resulting in performance degradation. In a real performance benchmark test measured by iperf receive, the performance result on Sapphire Rapids 100Gb NIC shows: w/ this fix ~51 Gbits/s, w/o this fix ~39.3 Gbits/s. Theoretically a first-stage IOMMU page table can still be shadowed in absence of the caching mode, e.g. with host write-protecting guest IOMMU page table to synchronize changed PTEs with the physical IOMMU page table. In this case the shadowing overhead is decoupled from emulating IOTLB invalidation then the overhead of the latter part is solely decided by the frequency of IOTLB invalidations. Hence allowing guest default dma domain to be lazy can also benefit the overall performance by reducing the total VM-exit numbers. Fixes: 29b32839725f ("iommu/vt-d: Do not use flush-queue when caching-mode is on") Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Tina Zhang <tina.zhang@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20230214025618.2292889-1-tina.zhang@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16iommu/vt-d: Fix PASID directory pointer coherencyJacob Pan
On platforms that do not support IOMMU Extended capability bit 0 Page-walk Coherency, CPU caches are not snooped when IOMMU is accessing any translation structures. IOMMU access goes only directly to memory. Intel IOMMU code was missing a flush for the PASID table directory that resulted in the unrecoverable fault as shown below. This patch adds clflush calls whenever allocating and updating a PASID table directory to ensure cache coherency. On the reverse direction, there's no need to clflush the PASID directory pointer when we deactivate a context entry in that IOMMU hardware will not see the old PASID directory pointer after we clear the context entry. PASID directory entries are also never freed once allocated. DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Read NO_PASID] Request device [00:0d.2] fault addr 0x1026a4000 [fault reason 0x51] SM: Present bit in Directory Entry is clear DMAR: Dump dmar1 table entries for IOVA 0x1026a4000 DMAR: scalable mode root entry: hi 0x0000000102448001, low 0x0000000101b3e001 DMAR: context entry: hi 0x0000000000000000, low 0x0000000101b4d401 DMAR: pasid dir entry: 0x0000000101b4e001 DMAR: pasid table entry[0]: 0x0000000000000109 DMAR: pasid table entry[1]: 0x0000000000000001 DMAR: pasid table entry[2]: 0x0000000000000000 DMAR: pasid table entry[3]: 0x0000000000000000 DMAR: pasid table entry[4]: 0x0000000000000000 DMAR: pasid table entry[5]: 0x0000000000000000 DMAR: pasid table entry[6]: 0x0000000000000000 DMAR: pasid table entry[7]: 0x0000000000000000 DMAR: PTE not present at level 4 Cc: <stable@vger.kernel.org> Fixes: 0bbeb01a4faf ("iommu/vt-d: Manage scalalble mode PASID tables") Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reported-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20230209212843.1788125-1-jacob.jun.pan@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16iommu/vt-d: Avoid superfluous IOTLB tracking in lazy modeJacob Pan
Intel IOMMU driver implements IOTLB flush queue with domain selective or PASID selective invalidations. In this case there's no need to track IOVA page range and sync IOTLBs, which may cause significant performance hit. This patch adds a check to avoid IOVA gather page and IOTLB sync for the lazy path. The performance difference on Sapphire Rapids 100Gb NIC is improved by the following (as measured by iperf send): w/o this fix~48 Gbits/s. with this fix ~54 Gbits/s Cc: <stable@vger.kernel.org> Fixes: 2a2b8eaa5b25 ("iommu: Handle freelists when using deferred flushing in iommu drivers") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20230209175330.1783556-1-jacob.jun.pan@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16iommu/vt-d: Fix error handling in sva enable/disable pathsLu Baolu
Roll back all previous actions in error paths of intel_iommu_enable_sva() and intel_iommu_disable_sva(). Fixes: d5b9e4bfe0d8 ("iommu/vt-d: Report prq to io-pgfault framework") Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20230208051559.700109-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16Merge tag 'asoc-v6.3' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v6.3 There's been quite a lot of activity this release, but not really one big feature - lots of new devices, plus a lot of cleanup and modernisation work spread throughout the subsystem: - More factoring out of common operations into helper functions by Morimoto-san. - DT schema conversons and stylistic nits. - Continued work on building out the new SOF IPC4 scheme. - Support for Awinc AT88395, Infineon PEB2466, Iron Device SMA1303, Mediatek MT8188, Realtek RT712, Renesas IDT821034, Samsung/Tesla FSD SoC I2S, and TI TAS5720A-Q1.
2023-02-16Merge tag 'asoc-fix-v6.2-rc8' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fix for v6.2 One non-urgent fix for v6.2, this could possibly wait till the merge window.
2023-02-16Merge branch 'topic/apple-gmux' into for-nextTakashi Iwai
Pull vga_switcheroo fix for Macs Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-02-16ALSA: hda/hdmi: Register with vga_switcheroo on Dual GPU MacbooksOrlando Chamberlain
Commit 586bc4aab878 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD") caused only AMD gpu's with PX to have their audio component register with vga_switcheroo. This meant that Apple Macbooks with apple-gmux as the gpu switcher no longer had the audio client registering, so when the gpu is powered off by vga_switcheroo snd_hda_intel is unaware that it should have suspended the device: amdgpu: switched off snd_hda_intel 0000:03:00.1: Unable to change power state from D3hot to D0, device inaccessible snd_hda_intel 0000:03:00.1: CORB reset timeout#2, CORBRP = 65535 To resolve this, we use apple_gmux_detect() and register a vga_switcheroo audio client when apple-gmux is detected. Fixes: 586bc4aab878 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD") Link: https://lore.kernel.org/all/20230210044826.9834-9-orlandoch.dev@gmail.com/ Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com> Link: https://lore.kernel.org/r/20230216103450.12925-1-orlandoch.dev@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-02-16dmaengine: idma64: Update bytes_transferred fieldAman Kumar
Currently when 8250 data transfer is done, bytes_tranferred always returns 0 at /sys/devices/pci0000\:\:**.*/dma/dma*chan*/bytes_transferred. In many cases it gives false impression that data is not being trasferred via DMA. So, updating the bytes_transferred field to count the bytes whenever there is data transfer using idma64. Co-developed-by: Srikanth Thokala <srikanth.thokala@intel.com> Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com> Signed-off-by: Aman Kumar <aman.kumar@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230203121702.15725-1-aman.kumar@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: imx-sdma: Set DMA channel to be privateKai-Heng Feng
If async-tx is loaded before device drivers that requires imx-sdma, the dmaengine_get() routine from async-tx grabs all non-private channels, so devices that require DMA fail to work. So mark imx-sdma with DMA_PRIVATE to avoid such situation. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20230207045745.1029959-1-kai.heng.feng@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: dw: Move check for paused channel to dwc_get_residue()Andy Shevchenko
Move check for paused channel to dwc_get_residue() and rename the latter to dwc_get_residue_and_status(). This improves data integrity as residue and DMA channel status are set in the same function under the same conditions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230130151747.20704-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: ptdma: check for null desc before calling pt_cmd_callbackEric Pilmore
Resolves a panic that can occur on AMD systems, typically during host shutdown, after the PTDMA driver had been exercised. The issue was the pt_issue_pending() function is mistakenly assuming that there will be at least one descriptor in the Submitted queue when the function is called. However, it is possible that both the Submitted and Issued queues could be empty, which could result in pt_cmd_callback() being mistakenly called with a NULL pointer. Ref: Bugzilla Bug 216856. Fixes: 6fa7e0e836e2 ("dmaengine: ptdma: fix concurrency issue with multiple dma transfer") Signed-off-by: Eric Pilmore <epilmore@gigaio.com> Link: https://lore.kernel.org/r/20230210075142.58253-1-epilmore@gigaio.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: dw-axi-dmac: Do not dereference NULL structureKees Cook
If "vdesc" is NULL, it cannot be used with vd_to_axi_desc(). Leave "bytes" unchanged at 0. Seen under GCC 13 with -Warray-bounds: ../drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c: In function 'dma_chan_tx_status': ../drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c:329:46: warning: array subscript 0 is outside array bounds of 'struct virt_dma_desc[46116860184273879]' [-Warray-bounds=] 329 | bytes = vd_to_axi_desc(vdesc)->length; | ^~ Fixes: 8e55444da65c ("dmaengine: dw-axi-dmac: Support burst residue granularity") Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230127223623.never.507-kees@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: idxd: Fix default allowed read buffers value in groupFenghua Yu
Currently default read buffers that is allowed in a group is 0. grpcfg will be configured to max read buffers that IDXD can support if the group's allowed read buffers value is 0. But 0 is an invalid read buffers value and user may get confused when seeing the invalid initial value 0 through sysfs interface. To show only valid allowed read buffers value and eliminate confusion, directly initialize the allowed read buffers to IDXD's max read buffers. User still can change the value through sysfs interface. Suggested-by: Ramesh Thomas <ramesh.thomas@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230127192855.966929-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dmaengine: sf-pdma: pdma_desc memory leak fixShravan Chippa
Commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel") changed sf_pdma_prep_dma_memcpy() to unconditionally allocate a new sf_pdma_desc each time it is called. The driver previously recycled descs, by checking the in_use flag, only allocating additional descs if the existing one was in use. This logic was removed in commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel"), but sf_pdma_free_desc() was not changed to handle the new behaviour. As a result, each time sf_pdma_prep_dma_memcpy() is called, the previous descriptor is leaked, over time leading to memory starvation: unreferenced object 0xffffffe008447300 (size 192): comm "irq/39-mchp_dsc", pid 343, jiffies 4294906910 (age 981.200s) hex dump (first 32 bytes): 00 00 00 ff 00 00 00 00 b8 c1 00 00 00 00 00 00 ................ 00 00 70 08 10 00 00 00 00 00 00 c0 00 00 00 00 ..p............. backtrace: [<00000000064a04f4>] kmemleak_alloc+0x1e/0x28 [<00000000018927a7>] kmem_cache_alloc+0x11e/0x178 [<000000002aea8d16>] sf_pdma_prep_dma_memcpy+0x40/0x112 Add the missing kfree() to sf_pdma_free_desc(), and remove the redundant in_use flag. Fixes: b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel") Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230120100623.3530634-1-shravan.chippa@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeaterNeil Armstrong
For USB 2.0 compliance, eUSB2 needs a repeater. The PHY needs to initialize and reset it. So add repeater support Co-developed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230208190200.2966723-6-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16phy: qcom: Add QCOM SNPS eUSB2 repeater driverAbel Vesa
PM8550B contains a eUSB2 repeater used for making the eUSB2 from SM8550 USB 2.0 compliant. This can be modelled SW-wise as a Phy. So add a new phy driver for it. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20230208190200.2966723-5-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeaterAbel Vesa
The phys property is used for allowing the eusb2 to interface with the repeater, which is modelled as a phy driver. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230208190200.2966723-4-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16dt-bindings: phy: Add qcom,snps-eusb2-repeater schema fileAbel Vesa
The SM8550 SoC uses Synopsis eUSB2 repeater found in PM8550b. Add a dt-binding schema for the new driver. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230208190200.2966723-2-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16io_uring: Support calling io_uring_register with a registered ring fdJosh Triplett
Add a new flag IORING_REGISTER_USE_REGISTERED_RING (set via the high bit of the opcode) to treat the fd as a registered index rather than a file descriptor. This makes it possible for a library to open an io_uring, register the ring fd, close the ring fd, and subsequently use the ring entirely via registered index. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Link: https://lore.kernel.org/r/f2396369e638284586b069dbddffb8c992afba95.1676419314.git.josh@joshtriplett.org [axboe: remove extra high bit clear] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-16dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional ↵Neil Armstrong
phy-supply property Add missing optional phy-supply property used to power up PHY regulators. Fixes: 87a55485f2fc ("dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230207-b4-amlogic-amlogic-g12a-usb3-pcie-phy-fix-v1-1-3e437b759549@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16phy: rockchip-typec: Fix unsigned comparison with less than zeroJiapeng Chong
The dp and ufp are defined as bool type, the return value type of function extcon_get_state should be int, so the type of dp and ufp are modified to int. ./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3962 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20230213035709.99027-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-16staging: r8188eu: Revert "staging: r8188eu: simplify rtw_get_ff_hwaddr"Martin Kaiser
This reverts commit fd48124e0982 ("staging: r8188eu: simplify rtw_get_ff_hwaddr"). The cleanup in this commit removes the qsel to addr mappings in rtw_get_ff_hwaddr. The underlying assumption is that rtw_write_port uses its addr parameter only for the high_queue check. This is obviously incorrect as rtw_write_port calls ffaddr2pipehdl(pdvobj, addr); where addr is mapped to a usb bulk endpoint. Unfortunately, testing did not show any problems. The Edimax V2 on which I tested has two bulk out endpoints. I guess that with the incorrect patch, addr could only be 0 (no high queue) or 6 (high queue), both of which were mapped to the first bulk out endpoint. Data transfers did still work... Fixes: fd48124e0982 ("staging: r8188eu: simplify rtw_get_ff_hwaddr") Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20230213195407.15085-1-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16staging: r8188eu: replace hand coded loop with list_for_each_entryMartin Kaiser
In function rtw_get_stainfo, we can use list_for_each_entry to iterate over the list of stations and make the code a bit simpler. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20230211170223.419205-1-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16staging: r8188eu: merge _rtw_enqueue_cmd into its callerMartin Kaiser
The _rtw_enqueue_cmd function is called only by rtw_enqueue_cmd. When _rtw_enqueue_cmd is called, the caller has already checked that the obj parameter is not NULL. _rtw_enqueue_cmd returns _SUCCESS in any case. We can merge the two functions and simplify the error handling. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Link: https://lore.kernel.org/r/20230211165045.414424-1-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16powerpc/mm: Rearrange if-else block to avoid clang warningAnders Roxell
Clang warns: arch/powerpc/mm/book3s64/radix_tlb.c:1191:23: error: variable 'hstart' is uninitialized when used here __tlbiel_va_range(hstart, hend, pid, ^~~~~~ arch/powerpc/mm/book3s64/radix_tlb.c:1191:31: error: variable 'hend' is uninitialized when used here __tlbiel_va_range(hstart, hend, pid, ^~~~ Rework the 'if (IS_ENABLE(CONFIG_TRANSPARENT_HUGEPAGE))' so hstart/hend is always initialized to silence the warnings. That will also simplify the 'else' path. Clang is getting confused with these warnings, but the warnings is a false-positive. Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220810114318.3220630-1-anders.roxell@linaro.org
2023-02-16powerpc/nohash: Fix build with llvm-asMichael Ellerman
When using the LLVM integrated assembler (llvm-as), the book3e build fails with: arch/powerpc/mm/nohash/tlb_low_64e.S:354:2: error: invalid instruction tlbilxva 0,%r15 ^ tlbilxva is an extended mnemonic for tlbilx, but llvm-as also doesn't support tlbilx, despite it being an e500mc instruction. Fix it by using the existing PPC_TLBILX_VA macro. The resulting binary is identical when building with binutils. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230216112915.1681631-1-mpe@ellerman.id.au
2023-02-16powerpc/nohash: Fix build error with binutils >= 2.38Michael Ellerman
With bintils >= 2.38 the ppc64_book3e_allmodconfig build fails: {standard input}: Assembler messages: {standard input}:196: Error: unrecognized opcode: `lbarx' {standard input}:196: Error: unrecognized opcode: `stbcx.' make[5]: *** [scripts/Makefile.build:252: arch/powerpc/mm/nohash/e500_hugetlbpage.o] Error 1 That happens because the default CPU for that config is e5500, set via CONFIG_TARGET_CPU, and so the assembler is building for e5500, which doesn't support those instructions. Fix it by using machine directives to tell the assembler to assemble the relevant code for e6500, which does support lbarx/stbcx. That is safe because the code already has the CPU_FTR_SMT check, which ensures the lbarx sequence doesn't run on e5500, which doesn't support SMT. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230213112322.998003-1-mpe@ellerman.id.au
2023-02-16scripts/tags.sh: fix incompatibility with PCRE2Carlos Llamas
Starting with release 10.38 PCRE2 drops default support for using \K in lookaround patterns as described in [1]. Unfortunately, scripts/tags.sh relies on such functionality to collect all_compiled_soures() leading to the following error: $ make COMPILED_SOURCE=1 tags GEN tags grep: \K is not allowed in lookarounds (but see PCRE2_EXTRA_ALLOW_LOOKAROUND_BSK) The usage of \K for this pattern was introduced in commit 4f491bb6ea2a ("scripts/tags.sh: collect compiled source precisely") which speeds up the generation of tags significantly. In order to fix this issue without compromising the performance we can switch over to an equivalent sed expression. The same matching pattern is preserved here except \K is replaced with a backreference \1. [1] https://www.pcre.org/current/doc/html/pcre2syntax.html#SEC11 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Jialu Xu <xujialu@vimux.org> Cc: Vipin Sharma <vipinsh@google.com> Cc: stable@vger.kernel.org Fixes: 4f491bb6ea2a ("scripts/tags.sh: collect compiled source precisely") Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20230215183850.3353198-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16tty: n_gsm: add keep alive supportDaniel Starke
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapters 5.4.6.3.4 and 5.1.8.1.3 describe the test command which can be used to test the mux connection between both sides. Currently, no algorithm is implemented to make use of this command. This requires that each multiplexed upper layer protocol supervises the underlying muxer connection to handle possible connection losses. Introduce ioctl commands and functions to optionally enable keep alive handling via the test command as described in chapter 5.4.6.3.4. A single incrementing octet "ka_num" is being used for unique identification of each single keep alive packet. Retries will use the same "ka_num" value as the original packet. Retry count and interval are taken from the general parameters N2 and T2. Add usage description and basic example for the new ioctl to the n_gsm documentation. Note that support for the test command is mandatory and already present in the muxer implementation since the very first version. Also note that the previous ioctl structure gsm_config cannot be extended due to missing checks against zero of the field "unused". Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20230214122737.1976-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16serial: imx: remove a redundant checkTom Rix
cpp_check reports drivers/tty/serial/imx.c:1207:15: style: Condition 'r_bytes>0' is always true [knownConditionTrueFalse] if (r_bytes > 0) { r_byte is set to r_bytes = rx_ring->head - rx_ring->tail; The head - tail calculation is also done by the earlier check if (rx_ring->head <= sg_dma_len(sgl) && rx_ring->head > rx_ring->tail) { so r_bytes will always be > 0, so the second check is not needed. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Link: https://lore.kernel.org/r/20230211154550.2130670-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16OPP: fix error checking in opp_migrate_dentry()Qi Zheng
Since commit ff9fb72bc077 ("debugfs: return error values, not NULL") changed return value of debugfs_rename() in error cases from %NULL to %ERR_PTR(-ERROR), we should also check error values instead of NULL. Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Link: https://lore.kernel.org/r/20230208040037.60305-1-zhengqi.arch@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16debugfs: update comment of debugfs_rename()Qi Zheng
Since commit ff9fb72bc077 ("debugfs: return error values, not NULL") changed return value of debugfs_rename() in error cases from %NULL to %ERR_PTR(-ERROR), the comment of debugfs_rename should also be updated so as not to mislead readers. Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Link: https://lore.kernel.org/r/20230208035634.58095-1-zhengqi.arch@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16i3c: fix device.h kernel-doc warningsRandy Dunlap
Fix all kernel-doc warnings in <linux/i3c/device.h>: include/linux/i3c/device.h:27: warning: contents before sections include/linux/i3c/device.h:196: warning: Excess function parameter 'dev' description in 'dev_to_i3cdev' Fixes: fa838c8ce537 ("i3c: move dev_to_i3cdev() to use container_of_const()") Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-i3c@lists.infradead.org Link: https://lore.kernel.org/r/20230213070324.1564-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16perf c2c: Add report option to show false sharing in adjacent cachelinesFeng Tang
Many platforms have feature of adjacent cachelines prefetch, when it is enabled, for data in RAM of 2 cachelines (2N and 2N+1) granularity, if one is fetched to cache, the other one could likely be fetched too, which sort of extends the cacheline size to double, thus the false sharing could happens in adjacent cachelines. 0Day has captured performance changed related with this [1], and some commercial software explicitly makes its hot global variables 128 bytes aligned (2 cache lines) to avoid this kind of extended false sharing. So add an option "--double-cl" for 'perf c2c report' to show false sharing in double cache line granularity, which acts just like the cacheline size is doubled. There is no change to c2c record. The hardware events of shared cacheline are still per cacheline, and this option just changes the granularity of how events are grouped and displayed. In the 'perf c2c report' output below (will-it-scale's 'pagefault2' case on old kernel): ---------------------------------------------------------------------- 26 31 2 0 0 0 0xffff888103ec6000 ---------------------------------------------------------------------- 35.48% 50.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff8133148b 1153 66 971 3748 74 [k] get_mem_cgroup_from_mm 6.45% 0.00% 0.00% 0.00% 0.00% 0x10 0 1 0xffffffff813396e4 570 0 1531 879 75 [k] mem_cgroup_charge 25.81% 50.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81331472 949 70 593 3359 74 [k] get_mem_cgroup_from_mm 19.35% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81339686 1352 0 1073 1022 74 [k] mem_cgroup_charge 9.68% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff813396d6 1401 0 863 768 74 [k] mem_cgroup_charge 3.23% 0.00% 0.00% 0.00% 0.00% 0x54 0 1 0xffffffff81333106 618 0 804 11 9 [k] uncharge_batch The offset 0x10 and 0x54 used to displayed in 2 groups, and now they are listed together to give users a hint of extended false sharing. [1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/ Committer notes: Link: https://lore.kernel.org/r/Y+wvVNWqXb70l4uy@feng-clx Removed -a, leaving just as --double-cl, as this probably is not used so frequently and perhaps will be even auto-detected if we manage to record the MSR where this is configured. Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Feng Tang <feng.tang@intel.com> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Joe Mario <jmario@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20230214075823.246414-1-feng.tang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-16Merge tag 'intel-gpio-v6.2-2' of ↵Bartosz Golaszewski
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current intel-gpio for v6.2-2 * Ignore spurious wakeup by touchpad on Clevo NH5xAx * Miscellaneous fix(es)
2023-02-16Merge branch 'seg6-add-psp-flavor-support-for-srv6-end-behavior'Paolo Abeni
Andrea Mayer says: ==================== seg6: add PSP flavor support for SRv6 End behavior Segment Routing for IPv6 (SRv6 in short) [1] is the instantiation of the Segment Routing (SR) [2] architecture on the IPv6 dataplane. In SRv6, the segment identifiers (SID) are IPv6 addresses and the segment list (SID List) is carried in the Segment Routing Header (SRH). A segment may be bound to a specific packet processing operation called "behavior". The RFC8986 [3] defines and standardizes the most common/relevant behaviors for network operators, e.g., End, End.X and End.T and so on. The RFC8986 also introduces the "flavors" framework aiming to modify or extend the capabilities of SRv6 End, End.X and End.T behaviors. Specifically, these behaviors support the following flavors (either individually or in combinations): - Penultimate Segment Pop (PSP); - Ultimate Segment Pop (USP); - Ultimate Segment Decapsulation (USD). Such flavors enable an End/End.X/End.T behavior to pop the SRH on the penultimate/ultimate SR endpoint node listed in the SID List or to perform a full decapsulation. Currently, the Linux kernel supports a large subset of behaviors described in RFC8986, including the End, End.X and End.T. However, PSP, USP and USD flavors have not yet been implemented. In this patchset, we extend the SRv6 subsystem to implement the PSP flavor in the SRv6 End behavior. To accomplish this task, we leverage the flavor framework previously introduced by another patchset required for supporting the efficient representation of the SID List through the NEXT-C-SID mechanism [4]. In details, the patchset is made of: - patch 1/3: seg6: factor out End lookup nexthop processing to a dedicated function - patch 2/3: seg6: add PSP flavor support for SRv6 End behavior - patch 3/3: selftests: seg6: add selftest for PSP flavor in SRv6 End behavior From the user space perspective, we do not need to change the iproute2 code to support the PSP flavor. However, we provide the man page for the PSP flavor in a separate patch. Comments, improvements and suggestions are always appreciated. [1] - RFC8754: https://datatracker.ietf.org/doc/html/rfc8754 [2] - RFC8402: https://datatracker.ietf.org/doc/html/rfc8402 [3] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986 [4] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression ==================== Link: https://lore.kernel.org/r/20230215134659.7613-1-andrea.mayer@uniroma2.it Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16selftests: seg6: add selftest for PSP flavor in SRv6 End behaviorAndrea Mayer
This selftest is designed for testing the PSP flavor in SRv6 End behavior. It instantiates a virtual network composed of several nodes: hosts and SRv6 routers. Each node is realized using a network namespace that is properly interconnected to others through veth pairs. The test makes use of the SRv6 End behavior and of the PSP flavor needed for removing the SRH from the IPv6 header at the penultimate node. The correct execution of the behavior is verified through reachability tests carried out between hosts. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16seg6: add PSP flavor support for SRv6 End behaviorAndrea Mayer
The "flavors" framework defined in RFC8986 [1] represents additional operations that can modify or extend a subset of existing behaviors such as SRv6 End, End.X and End.T. We report these flavors hereafter: - Penultimate Segment Pop (PSP); - Ultimate Segment Pop (USP); - Ultimate Segment Decapsulation (USD). Depending on how the Segment Routing Header (SRH) has to be handled, an SRv6 End* behavior can support these flavors either individually or in combinations. In this patch, we only consider the PSP flavor for the SRv6 End behavior. A PSP enabled SRv6 End behavior is used by the Source/Ingress SR node (i.e., the one applying the SRv6 Policy) when it needs to instruct the penultimate SR Endpoint node listed in the SID List (carried by the SRH) to remove the SRH from the IPv6 header. Specifically, a PSP enabled SRv6 End behavior processes the SRH by: i) decreasing the Segment Left (SL) from 1 to 0; ii) copying the Last Segment IDentifier (SID) into the IPv6 Destination Address (DA); iii) removing (i.e., popping) the outer SRH from the extension headers following the IPv6 header. It is important to note that PSP operation (steps i, ii, iii) takes place only at a penultimate SR Segment Endpoint node (i.e., when the SL=1) and does not happen at non-penultimate Endpoint nodes. Indeed, when a SID of PSP flavor is processed at a non-penultimate SR Segment Endpoint node, the PSP operation is not performed because it would not be possible to decrease the SL from 1 to 0. SL=2 SL=1 SL=0 | | | For example, given the SRv6 policy (SID List := < X, Y, Z >): - a PSP enabled SRv6 End behavior bound to SID "Y" will apply the PSP operation as Segment Left (SL) is 1, corresponding to the Penultimate Segment of the SID List; - a PSP enabled SRv6 End behavior bound to SID "X" will *NOT* apply the PSP operation as the Segment Left is 2. This behavior instance will apply the "standard" End packet processing, ignoring the configured PSP flavor at all. [1] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986 Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16seg6: factor out End lookup nexthop processing to a dedicated functionAndrea Mayer
The End nexthop lookup/input operations are moved into a new helper function named input_action_end_finish(). This avoids duplicating the code needed to compute the nexthop in the different flavors of the End behavior. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: dsa: ocelot: fix selecting MFD_OCELOTLukas Bulwahn
Commit 3d7316ac81ac ("net: dsa: ocelot: add external ocelot switch control") adds config NET_DSA_MSCC_OCELOT_EXT, which selects the non-existing config MFD_OCELOT_CORE. Replace this select with the intended and existing MFD_OCELOT. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Colin Foster <colin.foster@in-advantage.com> Link: https://lore.kernel.org/r/20230215104631.31568-1-lukas.bulwahn@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16usb: dwc3: xilinx: Remove unused of_gpio,hAndy Shevchenko
of_gpio.h provides a single function, which is not used in this driver. Remove unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20230215165239.83806-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-16Merge branch 'sfc-devlink-support-for-ef100'Paolo Abeni
Alejandro Lucero says: ==================== sfc: devlink support for ef100 This patchset adds devlink port support for ef100 allowing setting VFs mac addresses through the VF representor devlink ports. Basic devlink infrastructure is first introduced, then support for info command. Next changes for enumerating MAE ports which will be used for devlink port creation when netdevs are registered. Adding support for devlink port_function_hw_addr_get requires changes in the ef100 driver for getting the mac address based on a client handle. This allows to obtain VFs mac addresses during netdev initialization as well what is included in patch 6. Such client handle is used in patches 7 and 8 for getting and setting devlink port addresses. ==================== Link: https://lore.kernel.org/r/20230215090828.11697-1-alejandro.lucero-palau@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: add support for devlink port_function_hw_addr_set in ef100Alejandro Lucero
Using the builtin client handle id infrastructure, add support for setting the mac address linked to mports in ef100. This implies to execute an MCDI command for giving the address to the firmware for the specific devlink port. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: add support for devlink port_function_hw_addr_get in ef100Alejandro Lucero
Using the builtin client handle id infrastructure, add support for obtaining the mac address linked to mports in ef100. This implies to execute an MCDI command for getting the data from the firmware for each devlink port. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: obtain device mac address based on firmware handle for ef100Alejandro Lucero
Getting device mac address is currently based on a specific MCDI command only available for the PF. This patch changes the MCDI command to a generic one for PFs and VFs based on a client handle. This allows both PFs and VFs to ask for their mac address during initialization using the CLIENT_HANDLE_SELF. Moreover, the patch allows other client handles which will be used by the PF to ask for mac addresses linked to VFs. This is necessary for suporting the port_function_hw_addr_get devlink function in further patches. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16sfc: add devlink port support for ef100Alejandro Lucero
Using the data when enumerating mports, create devlink ports just before netdevs are registered and remove those devlink ports after netdev has been unregistered. Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 20:33:08 +0000