summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-06-28perf bpf: 8 byte align bpil dataIan Rogers
bpil data is accessed assuming 64-bit alignment resulting in undefined behavior as the data is just byte aligned. With an -fsanitize=undefined build the following errors are observed: $ sudo perf record -a sleep 1 util/bpf-event.c:310:22: runtime error: load of misaligned address 0x55f61084520f for type '__u64', which requires 8 byte alignment 0x55f61084520f: note: pointer points here a8 fe ff ff 3c 51 d3 c0 ff ff ff ff 04 84 d3 c0 ff ff ff ff d8 aa d3 c0 ff ff ff ff a4 c0 d3 c0 ^ util/bpf-event.c:311:20: runtime error: load of misaligned address 0x55f61084522f for type '__u32', which requires 4 byte alignment 0x55f61084522f: note: pointer points here ff ff ff ff c7 17 00 00 f1 02 00 00 1f 04 00 00 58 04 00 00 00 00 00 00 0f 00 00 00 63 02 00 00 ^ util/bpf-event.c:198:33: runtime error: member access within misaligned address 0x55f61084523f for type 'const struct bpf_func_info', which requires 4 byte alignment 0x55f61084523f: note: pointer points here 58 04 00 00 00 00 00 00 0f 00 00 00 63 02 00 00 3b 00 00 00 ab 02 00 00 44 00 00 00 14 03 00 00 Correct this by rouding up the data sizes and aligning the pointers. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20220614014714.1407239-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-28tools kvm headers arm64: Update KVM headers from the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: 2cde51f1e10f2600 ("KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace") b22216e1a617ca55 ("KVM: arm64: Add vendor hypervisor firmware register") 428fd6788d4d0e0d ("KVM: arm64: Add standard hypervisor firmware register") 05714cab7d63b189 ("KVM: arm64: Setup a framework for hypercall bitmap firmware registers") 18f3976fdb5da2ba ("KVM: arm64: uapi: Add kvm_debug_exit_arch.hsr_high") a5905d6af492ee6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated") That don't causes any changes in tooling (when built on x86), only addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Morse <james.morse@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Raghavendra Rao Ananta <rananta@google.com> Link: https://lore.kernel.org/lkml/YrsWcDQyJC+xsfmm@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-28perf offcpu: Accept allowed sample types onlyNamhyung Kim
As offcpu-time event is synthesized at the end, it could not get the all the sample info. Define OFFCPU_SAMPLE_TYPES for allowed ones and mask out others in evsel__config() to prevent parse errors. Because perf sample parsing assumes a specific ordering with the sample types, setting unsupported one would make it fail to read data like perf record -d/--data. Fixes: edc41a1099c2d08c ("perf record: Enable off-cpu analysis with BPF") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Blake Jones <blakejones@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220624231313.367909-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-28perf offcpu: Fix build failure on old kernelsNamhyung Kim
Old kernels have a 'struct task_struct' which contains a "state" field and newer kernels have "__state" instead. While the get_task_state() in the BPF code handles that in some way, it assumed the current kernel has the new definition and it caused a build error on old kernels. We should not assume anything and access them carefully. Do not use 'task struct' directly access it instead using new and old definitions in a row. Fixes: edc41a1099c2d08c ("perf record: Enable off-cpu analysis with BPF") Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Blake Jones <blakejones@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20220624231313.367909-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-28pinctrl: stm32: fix optional IRQ support to gpiosFabien Dessenne
To act as an interrupt controller, a gpio bank relies on the "interrupt-parent" of the pin controller. When this optional "interrupt-parent" misses, do not create any IRQ domain. This fixes a "NULL pointer in stm32_gpio_domain_alloc()" kernel crash when the interrupt-parent = <exti> property is not declared in the Device Tree. Fixes: 0eb9f683336d ("pinctrl: Add IRQ support to STM32 gpios") Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20220627142350.742973-1-fabien.dessenne@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-28linux/dim: Fix divide by 0 in RDMA DIMTao Liu
Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio == 0. CallTrace: Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020 task: ffff880194b78000 task.stack: ffffc90006714000 RIP: 0010:backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202 RAX: 0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09 R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880c10e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ib_poll_handler+0x43/0x80 [ib_core] irq_poll_softirq+0xae/0x110 __do_softirq+0xd1/0x28c irq_exit+0xde/0xf0 do_IRQ+0x54/0xe0 common_interrupt+0x8f/0x8f </IRQ> ? cpuidle_enter_state+0xd9/0x2a0 ? cpuidle_enter_state+0xc7/0x2a0 ? do_idle+0x170/0x1d0 ? cpu_startup_entry+0x6f/0x80 ? start_secondary+0x1b9/0x210 ? secondary_startup_64+0xa5/0xb0 Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0 Fixes: f4915455dcf0 ("linux/dim: Implement RDMA adaptive moderation (DIM)") Link: https://lore.kernel.org/r/20220627140004.3099-1-thomas.liu@ucloud.cn Signed-off-by: Tao Liu <thomas.liu@ucloud.cn> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-06-28net: bonding: fix possible NULL deref in rlb codeEric Dumazet
syzbot has two reports involving the same root cause. bond_alb_initialize() must not set bond->alb_info.rlb_enabled if a memory allocation error is detected. Report 1: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted 5.19.0-rc3-syzkaller-00132-g3b89b511ea0c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393 Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffffc90018a8f678 EFLAGS: 00010203 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88803375bb00 RSI: ffffffff84ec4ac4 RDI: 0000000000000014 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880ac889000 R14: 0000000000000000 R15: ffff88815a668c80 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005597077e10b0 CR3: 0000000026668000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663 __bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline] bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839 default_device_exit_batch+0x449/0x590 net/core/dev.c:11333 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Report 2: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-12108-g58f9d52ff689 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502 Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49 RSP: 0018:ffffc9000300ee80 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90016c11000 RDX: 0000000000000006 RSI: ffffffff84eb6bf3 RDI: 0000000000000030 RBP: dffffc0000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: ffff888027c80c80 R13: ffff88807d7ff800 R14: ffffed1004f901bd R15: 0000000000000000 FS: 00007f6f46c58700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 00000000516cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070 bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765 bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173 bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253 bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159 do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577 rtnl_newlink_create net/core/rtnetlink.c:3380 [inline] __rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6f45a89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6f46c58168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6f45b9c030 RCX: 00007f6f45a89109 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000006 RBP: 00007f6f45ae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffed99029af R14: 00007f6f46c58300 R15: 0000000000022000 </TASK> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220627102813.126264-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-28pinctrl: imx: Add the zero base flag for imx93Jacky Bai
On i.MX93, the pin mux reg offset is from 0x0, so need to add the 'ZERO_OFFSET_VALID' flag to make sure the pin at mux offset 0 can be found. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Link: https://lore.kernel.org/r/20220613031854.1571357-1-ping.bai@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-28ARM: at91: pm: Mark at91_pm_secure_init as __initFabio Estevam
at91_pm_secure_init() is used inside sama5d2_pm_init(), which has the __init notation. Pass the __init notation to at91_pm_secure_init() as well to fix the following section mismatch warning: WARNING: modpost: vmlinux.o(.text.unlikely+0x2138): Section mismatch in reference from the function at91_pm_secure_init() to the (unknown reference) .init.rodata:(unknown) Fixes: f2f5cf78a333 ("ARM: at91: pm: add support for sama5d2 secure suspend") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220622114810.1186330-1-festevam@gmail.com
2022-06-28ARM: at91: fix soc detection for SAM9X60 SiPsMihai Sain
Fix SoC detection for SAM9X60 SiPs: SAM9X60D5M SAM9X60D1G SAM9X60D6K Fixes: af3a10513cd6 ("drivers: soc: atmel: add per soc id and version match masks") Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616081344.1978664-1-claudiu.beznea@microchip.com
2022-06-28ARM: dts: at91: sama5d2_icp: fix eeprom compatiblesEugen Hristev
The eeprom memories on the board are microchip 24aa025e48, which are 2 Kbits and are compatible with at24c02 not at24c32. Fixes: 68a95ef72cefe ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220607090455.80433-2-eugen.hristev@microchip.com
2022-06-28ARM: dts: at91: sam9x60ek: fix eeprom compatible and sizeEugen Hristev
The board has a microchip 24aa025e48 eeprom, which is a 2 Kbits memory, so it's compatible with at24c02 not at24c32. Also the size property is wrong, it's not 128 bytes, but 256 bytes. Thus removing and leaving it to the default (256). Fixes: 1e5f532c27371 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220607090455.80433-1-eugen.hristev@microchip.com
2022-06-28ARM: at91: pm: use proper compatibles for sama7g5's rtc and rttClaudiu Beznea
Use proper compatible strings for SAMA7G5's RTC and RTT IPs. These are necessary for configuring wakeup sources for ULP1 PM mode. Fixes: 6501330f9f5e ("ARM: at91: pm: add pm support for SAMA7G5") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220523092421.317345-4-claudiu.beznea@microchip.com
2022-06-28ARM: at91: pm: use proper compatibles for sam9x60's rtc and rttClaudiu Beznea
Use proper compatible strings for SAM9X60's RTC and RTT IPs. These are necessary for configuring wakeup sources for ULP1 PM mode. Fixes: eaedc0d379da ("ARM: at91: pm: add ULP1 support for SAM9X60") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220523092421.317345-3-claudiu.beznea@microchip.com
2022-06-28ARM: at91: pm: use proper compatible for sama5d2's rtcClaudiu Beznea
Use proper compatible strings for SAMA5D2's RTC IPs. This is necessary for configuring wakeup sources for ULP1 PM mode. Fixes: d7484f5c6b3b ("ARM: at91: pm: configure wakeup sources for ULP1 mode") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220523092421.317345-2-claudiu.beznea@microchip.com
2022-06-28fanotify: refine the validation checks on non-dir inode maskAmir Goldstein
Commit ceaf69f8eadc ("fanotify: do not allow setting dirent events in mask of non-dir") added restrictions about setting dirent events in the mask of a non-dir inode mark, which does not make any sense. For backward compatibility, these restictions were added only to new (v5.17+) APIs. It also does not make any sense to set the flags FAN_EVENT_ON_CHILD or FAN_ONDIR in the mask of a non-dir inode. Add these flags to the dir-only restriction of the new APIs as well. Move the check of the dir-only flags for new APIs into the helper fanotify_events_supported(), which is only called for FAN_MARK_ADD, because there is no need to error on an attempt to remove the dir-only flags from non-dir inode. Fixes: ceaf69f8eadc ("fanotify: do not allow setting dirent events in mask of non-dir") Link: https://lore.kernel.org/linux-fsdevel/20220627113224.kr2725conevh53u4@quack3.lan/ Link: https://lore.kernel.org/r/20220627174719.2838175-1-amir73il@gmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2022-06-28openrisc: unwinder: Fix grammar issue in commentXiang wangx
Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-06-28irqchip: or1k-pic: Undefine mask_ack for level triggered hardwareStafford Horne
The mask_ack operation clears the interrupt by writing to the PICSR register. This we don't want for level triggered interrupt because it does not actually clear the interrupt on the source hardware. This was causing issues in qemu with multi core setups where interrupts would continue to fire even though they had been cleared in PICSR. Just remove the mask_ack operation. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-06-28cpufreq: Add MT8186 to cpufreq-dt-platdev blocklistAngeloGioacchino Del Regno
This SoC shall use the mediatek-cpufreq driver, or the system will crash upon any clock scaling request: add it to the cpufreq-dt-platdev blocklist. Fixes: 39b360102f3a ("cpufreq: mediatek: Add support for MT8186") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-28cpufreq: pmac32-cpufreq: Fix refcount leak bugLiang He
In pmac_cpufreq_init_MacRISC3(), we need to add corresponding of_node_put() for the three node pointers whose refcount have been incremented by of_find_node_by_name(). Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-28cpufreq: qcom-hw: Don't do lmh things without a throttle interruptStephen Boyd
Offlining cpu6 and cpu7 and then onlining cpu6 hangs on sc7180-trogdor-lazor because the throttle interrupt doesn't exist. Similarly, things go sideways when suspend/resume runs. That's because the qcom_cpufreq_hw_cpu_online() and qcom_cpufreq_hw_lmh_exit() functions are calling genirq APIs with an interrupt value of '-6', i.e. -ENXIO, and that isn't good. Check the value of the throttle interrupt like we already do in other functions in this file and bail out early from lmh code to fix the hang. Reported-by: Rob Clark <robdclark@chromium.org> Cc: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: a1eb080a0447 ("cpufreq: qcom-hw: provide online/offline operations") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-28drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.cLiang He
In qoriq_cpufreq_probe(), of_find_matching_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Fixes: 157f527639da ("cpufreq: qoriq: convert to a platform driver") [ Viresh: Fixed Author's name in commit log ] Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-27ipv6: take care of disable_policy when restoring routesNicolas Dichtel
When routes corresponding to addresses are restored by fixup_permanent_addr(), the dst_nopolicy parameter was not set. The typical use case is a user that configures an address on a down interface and then put this interface up. Let's take care of this flag in addrconf_f6i_alloc(), so that every callers benefit ont it. CC: stable@kernel.org CC: David Forster <dforster@brocade.com> Fixes: df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl") Reported-by: Siwar Zitouni <siwar.zitouni@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220623120015.32640-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27net: usb: asix: do not force pause frames supportOleksij Rempel
We should respect link partner capabilities and not force flow control support on every link. Even more, in current state the MAC driver do not advertises pause support so we should not keep flow control enabled at all. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20220624075139.3139300-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27net: asix: fix "can't send until first packet is send" issueOleksij Rempel
If cable is attached after probe sequence, the usbnet framework would not automatically start processing RX packets except at least one packet was transmitted. On systems with any kind of address auto configuration this issue was not detected, because some packets are send immediately after link state is changed to "running". With this patch we will notify usbnet about link status change provided by the PHYlib. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20220624075139.3139300-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27MAINTAINERS: nfc: drop Charles Gorand from NXP-NCIMichael Walle
Mails to Charles get an auto reply, that he is no longer working at Eff'Innov technologies. Drop the entry and mark the driver as orphaned. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220626200039.4062784-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27octeon_ep: use bitwise ANDShreenidhi Shedi
This should be bitwise operator not logical. Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com> Link: https://lore.kernel.org/r/20220626132947.3992423-1-sshedi@vmware.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27Merge branch 'notify-user-space-if-any-actions-were-flushed-before-error'Jakub Kicinski
Victor Nogueira says: ==================== Notify user space if any actions were flushed before error This patch series fixes the behaviour of actions flush so that the kernel always notifies user space whenever it deletes actions during a flush operation, even if it didn't flush all the actions. This series also introduces tdc tests to verify this new behaviour. ==================== Link: https://lore.kernel.org/r/20220623140742.684043-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27selftests: tc-testing: Add testcases to test new flush behaviourVictor Nogueira
Add tdc test cases to verify new flush behaviour is correct, which do the following: - Try to flush only one action which is being referenced by a filter - Try to flush three actions where the last one (index 3) is being referenced by a filter Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27net/sched: act_api: Notify user space if any actions were flushed before errorVictor Nogueira
If during an action flush operation one of the actions is still being referenced, the flush operation is aborted and the kernel returns to user space with an error. However, if the kernel was able to flush, for example, 3 actions and failed on the fourth, the kernel will not notify user space that it deleted 3 actions before failing. This patch fixes that behaviour by notifying user space of how many actions were deleted before flush failed and by setting extack with a message describing what happened. Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside") Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27epic100: fix use after free on rmmodTong Zhang
epic_close() calls epic_rx() and uses dma buffer, but in epic_remove_one() we already freed the dma buffer. To fix this issue, reorder function calls like in the .probe function. BUG: KASAN: use-after-free in epic_rx+0xa6/0x7e0 [epic100] Call Trace: epic_rx+0xa6/0x7e0 [epic100] epic_close+0xec/0x2f0 [epic100] unregister_netdev+0x18/0x20 epic_remove_one+0xaa/0xf0 [epic100] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Yilun Wu <yiluwu@cs.stonybrook.edu> Signed-off-by: Tong Zhang <ztong0001@gmail.com> Reviewed-by: Francois Romieu <romieu@fr.zoreil.com> Link: https://lore.kernel.org/r/20220627043351.25615-1-ztong0001@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27net: tun: stop NAPI when detaching queuesJakub Kicinski
While looking at a syzbot report I noticed the NAPI only gets disabled before it's deleted. I think that user can detach the queue before destroying the device and the NAPI will never be stopped. Fixes: 943170998b20 ("tun: enable NAPI for TUN/TAP driver") Acked-by: Petar Penkov <ppenkov@aviatrix.com> Link: https://lore.kernel.org/r/20220623042105.2274812-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27scsi: hisi_sas: Limit max hw sectors for v3 HWJohn Garry
If the controller is behind an IOMMU then the IOMMU IOVA caching range can affect performance, as discussed in [0]. Limit the max HW sectors to not exceed this limit. We need to hardcode the value until a proper DMA mapping API is available. [0] https://lore.kernel.org/linux-iommu/20210129092120.1482-1-thunder.leizhen@huawei.com/ Link: https://lore.kernel.org/r/1655988119-223714-1-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27dm raid: fix accesses beyond end of raid member arrayHeinz Mauelshagen
On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled). Cc: stable@vger.kernel.org Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-27arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typoStephan Gerhold
"make dtbs_check" complains about the missing "-supply" suffix for vdd_lvs1_2 which is clearly a typo, originally introduced in the msm8994-smd-rpm.dtsi file and apparently later copied to msm8992-xiaomi-libra.dts: msm8992-lg-bullhead-rev-10/101.dtb: pm8994-regulators: 'vdd_lvs1_2' does not match any of the regexes: '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+' From schema: regulator/qcom,smd-rpm-regulator.yaml msm8992-xiaomi-libra.dtb: pm8994-regulators: 'vdd_lvs1_2' does not match any of the regexes: '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+' From schema: regulator/qcom,smd-rpm-regulator.yaml Reported-by: Rob Herring <robh@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Fixes: f3b2c99e73be ("arm64: dts: Enable onboard SDHCI on msm8992") Fixes: 0f5cdb31e850 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220627135938.2901871-1-stephan.gerhold@kernkonzept.com
2022-06-27drm/msm/gem: Fix error return on fence id alloc failRob Clark
This was a typo, we didn't actually want to return zero. Fixes: a61acbbe9cf8 ("drm/msm: Track "seqno" fences by idr") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491145/ Link: https://lore.kernel.org/r/20220624184528.4036837-1-robdclark@gmail.com
2022-06-27parisc/unaligned: Fix emulate_ldw() breakageHelge Deller
The commit e8aa7b17fe41 broke the 32-bit load-word unalignment exception handler because it calculated the wrong amount of bits by which the value should be shifted. This patch fixes it. Signed-off-by: Helge Deller <deller@gmx.de> Fixes: e8aa7b17fe41 ("parisc/unaligned: Rewrite inline assembly of emulate_ldw()") Cc: stable@vger.kernel.org # v5.18
2022-06-27Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Fixes all over the place, most notably we are disabling IRQ hardening (again!)" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_ring: make vring_create_virtqueue_split prettier vhost-vdpa: call vhost_vdpa_cleanup during the release virtio_mmio: Restore guest page size on resume virtio_mmio: Add missing PM calls to freeze/restore caif_virtio: fix race between virtio_device_ready() and ndo_open() virtio-net: fix race between ndo_open() and virtio_device_ready() virtio: disable notification hardening by default virtio: Remove unnecessary variable assignments virtio_ring : keep used_wrap_counter in vq->last_used_idx vduse: Tie vduse mgmtdev and its device vdpa/mlx5: Initialize CVQ vringh only once vdpa/mlx5: Update Control VQ callback information
2022-06-27tick/nohz: unexport __init-annotated tick_nohz_full_setup()Masahiro Yamada
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794aba4 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c. Fixes: ae9e557b5be2 ("time: Export tick start/stop functions for rcutorture") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-27netfilter: br_netfilter: do not skip all hooks with 0 priorityFlorian Westphal
When br_netfilter module is loaded, skbs may be diverted to the ipv4/ipv6 hooks, just like as if we were routing. Unfortunately, bridge filter hooks with priority 0 may be skipped in this case. Example: 1. an nftables bridge ruleset is loaded, with a prerouting hook that has priority 0. 2. interface is added to the bridge. 3. no tcp packet is ever seen by the bridge prerouting hook. 4. flush the ruleset 5. load the bridge ruleset again. 6. tcp packets are processed as expected. After 1) the only registered hook is the bridge prerouting hook, but its not called yet because the bridge hasn't been brought up yet. After 2), hook order is: 0 br_nf_pre_routing // br_netfilter internal hook 0 chain bridge f prerouting // nftables bridge ruleset The packet is diverted to br_nf_pre_routing. If call-iptables is off, the nftables bridge ruleset is called as expected. But if its enabled, br_nf_hook_thresh() will skip it because it assumes that all 0-priority hooks had been called previously in bridge context. To avoid this, check for the br_nf_pre_routing hook itself, we need to resume directly after it, even if this hook has a priority of 0. Unfortunately, this still results in different packet flow. With this fix, the eval order after in 3) is: 1. br_nf_pre_routing 2. ip(6)tables (if enabled) 3. nftables bridge but after 5 its the much saner: 1. nftables bridge 2. br_nf_pre_routing 3. ip(6)tables (if enabled) Unfortunately I don't see a solution here: It would be possible to move br_nf_pre_routing to a higher priority so that it will be called later in the pipeline, but this also impacts ebtables evaluation order, and would still result in this very ordering problem for all nftables-bridge hooks with the same priority as the br_nf_pre_routing one. Searching back through the git history I don't think this has ever behaved in any other way, hence, no fixes-tag. Reported-by: Radim Hrazdil <rhrazdil@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-06-27netfilter: nf_tables: avoid skb access on nf_stolenFlorian Westphal
When verdict is NF_STOLEN, the skb might have been freed. When tracing is enabled, this can result in a use-after-free: 1. access to skb->nf_trace 2. access to skb->mark 3. computation of trace id 4. dump of packet payload To avoid 1, keep a cached copy of skb->nf_trace in the trace state struct. Refresh this copy whenever verdict is != STOLEN. Avoid 2 by skipping skb->mark access if verdict is STOLEN. 3 is avoided by precomputing the trace id. Only dump the packet when verdict is not "STOLEN". Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-06-27netfilter: nft_dynset: restore set element counter when failing to updatePablo Neira Ayuso
This patch fixes a race condition. nft_rhash_update() might fail for two reasons: - Element already exists in the hashtable. - Another packet won race to insert an entry in the hashtable. In both cases, new() has already bumped the counter via atomic_add_unless(), therefore, decrement the set element counter. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-06-27firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx APIBo Liu
Replace the deprecated ida_simple_{get,remove} with ida_{alloc,free}. Link: https://lore.kernel.org/r/20220616055052.4559-1-liubo03@inspur.com Signed-off-by: Bo Liu <liubo03@inspur.com> [sudeep.holla: Replace ida_alloc_min with ida_alloc as suggested by Cristian] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-27drm/i915: tweak the ordering in cpu_write_needs_clflushMatthew Auld
For imported dma-buf objects we leave the object as cache_coherent = 0 across all platforms, which is reasonable given that have no clue what the memory underneath is, and its not like the driver can ever manually clflush the pages anyway (like with i915_gem_clflush_object) for such objects. However on discrete we choose to treat cache_dirty = true as a programmer error, leading to a warning. The simplest fix looks to be to just change the ordering in cpu_write_needs_clflush to prevent ever setting cache_dirty for dma-buf objects on discrete. Fixes: d028a7690d87 ("drm/i915/dmabuf: Fix prime_mmap to work when using LMEM") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5266 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622155919.355081-1-matthew.auld@intel.com (cherry picked from commit 563aaf4a928def2d36d1b3de0a4b515e2477b4da) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-06-27drm/i915/dgfx: Disable d3cold at gfx root portAnshuman Gupta
Currently i915 disables d3cold for i915 pci dev. This blocks D3 for i915 gfx pci upstream bridge (VSP). Let's disable d3cold at gfx root port to make sure that i915 gfx VSP can transition to D3 to save some power. We don't need to disable/enable d3cold in rpm, s2idle suspend/resume handlers. Disabling/Enabling d3cold at gfx root port in probe/remove phase is sufficient. Fixes: 1a085e23411d ("drm/i915: Disable D3Cold in s2idle and runtime pm") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220616122249.5007-1-anshuman.gupta@intel.com (cherry picked from commit 138c2fca6f408f397ea8fbbbf33203f244d96e01) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-06-27drm/i915/gem: add missing elsekatrinzhou
Add missing else in set_proto_ctx_param() to fix coverity issue. Addresses-Coverity: ("Unused value") Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)") Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: katrinzhou <katrinzhou@tencent.com> [tursulin: fixup alignment] Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621124926.615884-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 7482a65664c16cc88eb84d2b545a1fed887378a1) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-06-27NFSD: restore EINVAL error translation in nfsd_commit()Alexey Khoroshilov
commit 555dbf1a9aac ("nfsd: Replace use of rwsem with errseq_t") incidentally broke translation of -EINVAL to nfserr_notsupp. The patch restores that. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 555dbf1a9aac ("nfsd: Replace use of rwsem with errseq_t") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-06-27eeprom: at25: Rework buggy read splittingGeert Uytterhoeven
The recent change to split reads into chunks has several problems: 1. If an SPI controller has no transfer size limit, max_chunk is SIZE_MAX, and num_msgs becomes zero, causing no data to be read into the buffer, and exposing the original contents of the buffer to userspace, 2. If the requested read size is not a multiple of the maximum transfer size, the last transfer reads too much data, overflowing the buffer, 3. The loop logic differs from the write case. Fix the above by: 1. Keeping track of the number of bytes that are still to be transferred, instead of precalculating the number of messages and keeping track of the number of bytes tranfered, 2. Calculating the transfer size of each individual message, taking into account the number of bytes left, 3. Switching from a "while"-loop to a "do-while"-loop, and renaming "msg_count" to "segment". While at it, drop the superfluous cast from "unsigned int" to "unsigned int", also from at25_ee_write(), where it was probably copied from. Fixes: 0a35780c755ccec0 ("eeprom: at25: Split reads into chunks and cap write size") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/7ae260778d2c08986348ea48ce02ef148100e088.1655817534.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ↵Hans de Goede
ideapad_dytc_v4_allow_table[] The Ideapad 5 15ITL05 uses DYTC version 4 for platform-profile control. This has been tested successfully with the ideapad-laptop DYTC version 5 code; Add the Ideapad 5 15ITL05 to the ideapad_dytc_v4_allow_table[]. Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220627130850.313537-1-hdegoede@redhat.com
2022-06-27platform/x86: ideapad-laptop: Add allow_v4_dytc module parameterHans de Goede
Add an allow_v4_dytc module parameter to allow users to easily test if DYTC version 4 platform-profiles work on their laptop. Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220623115914.103001-1-hdegoede@redhat.com
generated by cgit (git 2.34.1) at 2025-09-13 08:38:48 +0000