summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-18PCI: dwc: Always stop link in the dw_pcie_suspend_noirqRichard Zhu
On the i.MX8QM, PCIe link can't be re-established again in dw_pcie_resume_noirq(), if the LTSSM_EN bit is not cleared properly in dw_pcie_suspend_noirq(). So, add dw_pcie_stop_link() to dw_pcie_suspend_noirq() to fix this issue and to align the suspend/resume functions since there is dw_pcie_start_link() in dw_pcie_resume_noirq() already. Fixes: 4774faf854f5 ("PCI: dwc: Implement generic suspend/resume functionality") Link: https://lore.kernel.org/r/20241210081557.163555-2-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-18PCI: dw-rockchip: Don't wait for link since we can detect Link UpNiklas Cassel
The Root Complex specific device tree binding for pcie-dw-rockchip has the 'sys' interrupt marked as required. The driver requests the 'sys' IRQ unconditionally, and errors out if not provided. Thus, we can unconditionally set 'use_linkup_irq', so dw_pcie_host_init() doesn't wait for the link to come up. This will skip the wait for link up (since the bus will be enumerated once the link up IRQ is triggered), which reduces the bootup time. Link: https://lore.kernel.org/r/20250113-rockchip-no-wait-v1-1-25417f37b92f@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2025-01-18PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQNiklas Cassel
Most boards using the pcie-dw-rockchip PCIe controller lack standard hotplug support. Thus, when an endpoint is attached to the SoC, users have to rescan the bus manually to enumerate the device. This can be avoided by using the 'dll_link_up' interrupt in the combined system interrupt 'sys'. Once the 'dll_link_up' IRQ is received, the bus underneath the host bridge is scanned to enumerate PCIe endpoint devices. This implements the same functionality that was implemented in the DWC based pcie-qcom driver in 4581403f6792 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt"). The Root Complex specific device tree binding for pcie-dw-rockchip already has the 'sys' interrupt marked as required, so there is no need to update the device tree binding. This also means that we can request the 'sys' IRQ unconditionally. Link: https://lore.kernel.org/r/20241127145041.3531400-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: commit log, squash Pei Xiao's redundant dev_err() fix from https://lore.kernel.org/r/327718207d3cd72847c079ff9d56eb246744c182.1736126067.git.xiaopei01@kylinos.cn, squash Niklas's #define change from https://lore.kernel.org/r/20250103095812.2408364-2-cassel@kernel.org] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-18PCI: qcom: Update ICC and OPP values after Link Up eventKrishna chaitanya chundru
4581403f6792 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt") added the Link Up-based enumeration support, but did not update the ICC/OPP vote once link is up. Before that, the update happened during probe and the endpoints may or may not be enumerated at that time, so the ICC/OPP vote was not guaranteed to be accurate. With Link Up-based enumeration support, the driver can request the accurate vote based on the PCIe link. Call qcom_pcie_icc_opp_update() in qcom_pcie_global_irq_thread() after enumerating the endpoints. Fixes: 4581403f6792 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt") Link: https://lore.kernel.org/r/20241123-remove_wait2-v5-3-b5f9e6b794c2@quicinc.com Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2025-01-18PCI: qcom: Don't wait for link if we can detect Link UpKrishna chaitanya chundru
If we have a 'global' IRQ for Link Up events, we need not wait for the link to be up during PCI initialization, which reduces startup time. Check for 'global' IRQ, and if present, set 'use_linkup_irq', so dw_pcie_host_init() doesn't wait for the link to come up. Link: https://lore.kernel.org/r/20241123-remove_wait2-v5-2-b5f9e6b794c2@quicinc.com Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2025-01-18PCI: dwc: Don't wait for link up if driver can detect Link Up eventKrishna chaitanya chundru
If the driver can detect the Link Up event and enumerate downstream devices at that time, we need not wait here. Skip waiting for link to come up if the driver supports 'use_linkup_irq'. Link: https://lore.kernel.org/r/20241123-remove_wait2-v5-1-b5f9e6b794c2@quicinc.com Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: wrap comment, update commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2025-01-18PCI: dwc: Fix potential truncation in dw_pcie_edma_irq_verify()Niklas Cassel
Increase the size of the string buffer to avoid potential truncation in dw_pcie_edma_irq_verify(). This fixes the following build warning when compiling with W=1: drivers/pci/controller/dwc/pcie-designware.c: In function ‘dw_pcie_edma_detect’: drivers/pci/controller/dwc/pcie-designware.c:989:50: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 3 [-Wformat-truncation=] 989 | snprintf(name, sizeof(name), "dma%d", pci->edma.nr_irqs); | ^~ Link: https://lore.kernel.org/r/20250104002119.2681246-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-16PCI: dra7xx: Use syscon_regmap_lookup_by_phandle_argsKrzysztof Kozlowski
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over syscon_regmap_lookup_by_phandle() combined with getting the syscon argument. Except simpler code this annotates within one line that given phandle has arguments, so grepping for code would be easier. There is also no real benefit in printing errors on missing syscon argument, because this is done just too late: runtime check on static/build-time data. Dtschema and Devicetree bindings offer the static/build-time check for this already. Link: https://lore.kernel.org/r/20250112-syscon-phandle-args-pci-v1-1-fcb6ebcc0afc@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2025-01-16PCI: layerscape: Use syscon_regmap_lookup_by_phandle_argsKrzysztof Kozlowski
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over syscon_regmap_lookup_by_phandle() combined with getting the syscon argument. Except simpler code this annotates within one line that given phandle has arguments, so grepping for code would be easier. Link: https://lore.kernel.org/r/20250112-syscon-phandle-args-pci-v1-2-fcb6ebcc0afc@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Roy Zang <Roy.Zang@nxp.com>
2025-01-16PCI: imx6: Remove surplus imx7d_pcie_init_phy() functionRichard Zhu
This function essentially duplicates imx7d_pcie_enable_ref_clk(). So remove it. Link: https://lore.kernel.org/r/20241126075702.4099164-8-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16PCI: imx6: Add missing reference clock disable logicRichard Zhu
Ensure the *_enable_ref_clk() function is symmetric by addressing missing disable parts on some platforms. Fixes: d0a75c791f98 ("PCI: imx6: Factor out ref clock disable to match enable") Link: https://lore.kernel.org/r/20241126075702.4099164-7-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset()Richard Zhu
Since the apps_reset is asserted in imx_pcie_assert_core_reset(), it should be deasserted in imx_pcie_deassert_core_reset(). Fixes: 9b3fe6796d7c ("PCI: imx6: Add code to support i.MX7D") Link: https://lore.kernel.org/r/20241126075702.4099164-6-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16PCI: imx6: Skip controller_id generation logic for i.MX7DRichard Zhu
The i.MX7D only has one PCIe controller, so controller_id should always be 0. The previous code is incorrect although yielding the correct result. Fix by removing "IMX7D" from the switch case branch. Fixes: 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ") Link: https://lore.kernel.org/r/20241126075702.4099164-5-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16PCI: imx6: Fetch dbi2 and iATU base addesses from DTRichard Zhu
Since dw_pcie_get_resources() gets the dbi2 and iATU base addresses from DT, remove the code from the imx6 driver that does the same. Upstream DTSes have not enabled Endpoint function. So nothing is broken for old upstream DTBs. Link: https://lore.kernel.org/r/20241126075702.4099164-4-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-16PCI: imx6: Configure PHY based on Root Complex or Endpoint modeFrank Li
Pass PHY_MODE_PCIE_EP if the PCI controller operates in Endpoint (EP) mode, and fix the Root Complex (RC) mode being hardcoded using a drvdata mode check. Fixes: 8026f2d8e8a9 ("PCI: imx6: Call common PHY API to set mode, speed, and submode") Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-6-c4bfa5193288@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
2025-01-16PCI: imx6: Add Refclk for i.MX95 PCIeRichard Zhu
Add "ref" clock to enable Refclk. To avoid breaking DT backwards compatibility, the i.MX95 "ref" clock is optional. Use devm_clk_get_optional() to fetch i.MX95 PCIe optional clocks in driver. If using external clock, "ref" clock should point to external reference. If using internal clock, CREF_EN in LAST_TO_REG controls reference output, implemented in drivers/clk/imx/clk-imx95-blk-ctl.c. Link: https://lore.kernel.org/r/20241126075702.4099164-3-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16dt-bindings: PCI: fsl,imx6q-pcie: Add Refclk for i.MX95 RCRichard Zhu
Previous Refclk of i.MX95 PCIe RC is on when system boot to kernel. But boot firmware change the behavior, it is off when boot. So it must be turned on when it is used. Also it needs be turned off/on for suspend and resume. Add one Refclk for i.MX95 PCIe RC. Increase clocks' maxItems to 5 and keep the same restriction with other compatible string. Link: https://lore.kernel.org/r/20241126075702.4099164-2-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-01-16PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) supportFrank Li
Add support for the i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe Endpoint (EP). On the i.MX8Q platforms, the PCI bus addresses differ from the CPU addresses. However, the DesignWare (DWC) driver already handles this in the common code. Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-7-c4bfa5193288@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-16dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-epFrank Li
Add new compatible string fsl,imx8q-pcie-ep for iMX8Q. The 'reg-names' property only needs 'dbi' and 'addr_space' because the others are located at a default offset. The new 'clock-names' property aligns with the Root Complex (RC) naming. Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-5-c4bfa5193288@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Conor Dooley <conor.dooley@microchip.com>
2025-01-16PCI: Add pcie_print_tlp_log() to print TLP Header and Prefix LogIlpo Järvinen
Add pcie_print_tlp_log() to print TLP Header and Prefix Log. Print End-End Prefixes only if they are non-zero. Consolidate the few places which currently print TLP using custom formatting. Link: https://lore.kernel.org/r/20250114170840.1633-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-01-16PCI: Add TLP Prefix reading to pcie_read_tlp_log()Ilpo Järvinen
pcie_read_tlp_log() handles only 4 Header Log DWORDs but TLP Prefix Log (PCIe r6.1 secs 7.8.4.12 & 7.9.14.13) may also be present. Generalize pcie_read_tlp_log() and struct pcie_tlp_log to also handle TLP Prefix Log. The relevant registers are formatted identically in AER and DPC Capability, but has these variations: a) The offsets of TLP Prefix Log registers vary. b) DPC RP PIO TLP Prefix Log register can be < 4 DWORDs. c) AER TLP Prefix Log Present (PCIe r6.1 sec 7.8.4.7) can indicate Prefix Log is not present. Therefore callers must pass the offset of the TLP Prefix Log register and the entire length to pcie_read_tlp_log() to be able to read the correct number of TLP Prefix DWORDs from the correct offset. Link: https://lore.kernel.org/r/20250114170840.1633-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: squash ternary fix from https://lore.kernel.org/r/20250116172019.88116-1-colin.i.king@gmail.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-01-15sparc/PCI: Update reference to devm_of_pci_get_host_bridge_resources()Bjorn Helgaas
5bd51b35c7cb ("PCI: Rework of_pci_get_host_bridge_resources() to devm_of_pci_get_host_bridge_resources()") converted and renamed of_pci_get_host_bridge_resources(). Update the comment reference to match. Link: https://lore.kernel.org/r/20250113231557.441289-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Andreas Larsson <andreas@gaisler.com>
2025-01-15PCI: of: Simplify devm_of_pci_get_host_bridge_resources() interfaceBjorn Helgaas
Previously pci_parse_request_of_pci_ranges() supplied the default bus range to devm_of_pci_get_host_bridge_resources(), but that function is static and has no other callers, so there's no reason to complicate its interface by passing the default bus range. Drop the busno and bus_max parameters and use 0x0 and 0xff directly in devm_of_pci_get_host_bridge_resources(). Link: https://lore.kernel.org/r/20250113231557.441289-4-helgaas@kernel.org [bhelgaas: dev_warn() for invalid end of bus-range] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2025-01-15PCI: of: Drop 'No bus range found' messageBjorn Helgaas
The typical bus range for a host bridge is [bus 00-ff], and devm_of_pci_get_host_bridge_resources() defaults to that unless DT contains a "bus-range" property. devm_of_pci_get_host_bridge_resources() previously emitted a message when there was no "bus-range" property, but that seems unnecessary for this common situation. Remove the message. Link: https://lore.kernel.org/r/20250113231557.441289-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2025-01-15PCI: Unexport of_pci_parse_bus_range()Bjorn Helgaas
of_pci_parse_bus_range() is only used in drivers/pci/of.c, so make it static and unexport it. Link: https://lore.kernel.org/r/20250113231557.441289-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2025-01-15PCI: apple: Convert to {en,dis}able_device() callbacksMarc Zyngier
Now that the core host-bridge infrastructure is able to give us a callback on each device being added or removed, convert the bus-notifier hack to it. Link: https://lore.kernel.org/r/20241204150145.800408-3-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-15PCI: host-generic: Allow {en,dis}able_device() to be provided via pci_ecam_opsMarc Zyngier
In order to let host controller drivers using the host-generic infrastructure use the {en,dis}able_device() callbacks that can be used to configure sideband RID mapping hardware, provide these two callbacks as part of the pci_ecam_ops structure. Link: https://lore.kernel.org/r/20241204150145.800408-2-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-15PCI: imx6: Add IOMMU and ITS MSI support for i.MX95Frank Li
For the i.MX95, the configuration of a LUT is necessary to convert PCIe Requester IDs (RIDs) to StreamIDs, which are used by both IOMMU and ITS. This involves checking msi-map and iommu-map device tree properties to ensure consistent mapping of Requester IDs to the same StreamIDs. Subsequently, LUT-related registers are configured. If a msi-map isn't detected, the platform relies on DWC built-in controller for MSIs that do not need StreamIDs. Implement PCI bus callback function to handle enable_device() and disable_device() operations, setting up the LUT whenever a new PCI device is enabled. Known limitations: - If iommu-map exists in the device tree but the IOMMU controller is disabled, StreamIDs are programmed into the LUT. However, if a RID is out of range of the iommu-map, enabling the PCI device would result in a failure, although the PCI device can work without the IOMMU. - If msi-map exists in the device tree but the MSI controller is disabled, MSIs will not work. The DWC driver skips initializing the built-in MSI controller, falling back to legacy PCI INTx only. Link: https://lore.kernel.org/r/20250114-imx95_lut-v9-2-39f58dbed03a@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: fix uninitialized "sid" in imx_pcie_enable_device()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2025-01-15PCI: Add enable_device() and disable_device() callbacks for bridgesFrank Li
Some PCI host bridges require special handling when enabling or disabling PCI devices. For example, the i.MX95 platform has a lookup table to map Requester IDs to StreamIDs, which the SMMU and MSI controller use to identify the source of DMA accesses. Without this mapping, DMA accesses may target unintended memory, which would corrupt memory or read the wrong data. Add a host bridge enable_device() hook the imx6 driver can use to configure the Requester ID to StreamID mapping. The hardware table isn't big enough to map all possible Requester IDs, so this hook may fail if no table space is available. In that case, return failure from pci_enable_device(). It might make more sense to make pci_set_master() decline to enable bus mastering and return failure, but it currently doesn't have a way to return failure. Link: https://lore.kernel.org/r/20250114-imx95_lut-v9-1-39f58dbed03a@nxp.com Tested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-15PCI/DPC: Quirk PIO log size for Intel Raptor Lake-PTakashi Iwai
Apparently the Raptor Lake-P reference firmware configures the PIO log size correctly, but some vendor BIOSes, including at least ASUSTeK COMPUTER INC. Zenbook UX3402VA_UX3402VA, do not. Apply the quirk for Raptor Lake-P. This prevents kernel complaints like: DPC: RP PIO log size 0 is invalid and also enables the DPC driver to dump the RP PIO Log registers when DPC is triggered. Note that the bug report also mentions 8086:a76e, which has been already added by 627c6db20703 ("PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root Ports"). Link: https://lore.kernel.org/r/20250102164315.7562-1-tiwai@suse.de Link: https://bugzilla.suse.com/show_bug.cgi?id=1234623 Signed-off-by: Takashi Iwai <tiwai@suse.de> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2025-01-15PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1Werner Sembach
commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the policy that all PCIe ports are allowed to use D3. When the system is suspended if the port is not power manageable by the platform and won't be used for wakeup via a PME this sets up the policy for these ports to go into D3hot. This policy generally makes sense from an OSPM perspective but it leads to problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a specific old BIOS. This manifests as a system hang. On the affected Device + BIOS combination, add a quirk for the root port of the problematic controller to ensure that these root ports are not put into D3hot at suspend. This patch is based on https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com but with the added condition both in the documentation and in the code to apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only the affected root ports. Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250114222436.1075456-1-wse@tuxedocomputers.com Co-developed-by: Georg Gottleuber <ggo@tuxedocomputers.com> Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Cc: <stable@vger.kernel.org> # 6.1+
2025-01-15PCI/sysfs: Remove unnecessary zero in initializerIlpo Järvinen
Providing empty initializer for an array is enough to set its elements to zero. Thus, remove the redundant 0 from the initializer. Link: https://lore.kernel.org/r/20241028174046.1736-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2025-01-15PCI/sysfs: Use __free() in reset_method_store()Ilpo Järvinen
Use __free() from cleanup.h to handle freeing options in reset_method_store() as it simplifies the code flow. Link: https://lore.kernel.org/r/20241028174046.1736-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2025-01-15PCI/sysfs: Move reset related sysfs code to correct fileIlpo Järvinen
Most PCI sysfs code and structs are in a dedicated file but a few reset related things remain in pci.c. Move also them to pci-sysfs.c and drop pci_dev_reset_method_attr_is_visible() as it is 100% duplicate of pci_dev_reset_attr_is_visible(). Link: https://lore.kernel.org/r/20241028174046.1736-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2025-01-14PCI: Store number of supported End-End TLP PrefixesIlpo Järvinen
eetlp_prefix_path in the struct pci_dev tells if End-End TLP Prefixes are supported by the path or not, and the value is only calculated if CONFIG_PCI_PASID is set. The Max End-End TLP Prefixes field in the Device Capabilities Register 2 also tells how many (1-4) End-End TLP Prefixes are supported (PCIe r6.2 sec 7.5.3.15). The number of supported End-End Prefixes is useful for reading correct number of DWORDs from TLP Prefix Log register in AER capability (PCIe r6.2 sec 7.8.4.12). Replace eetlp_prefix_path with eetlp_prefix_max and determine the number of supported End-End Prefixes regardless of CONFIG_PCI_PASID so that an upcoming commit generalizing TLP Prefix Log register reading does not have to read extra DWORDs for End-End Prefixes that never will be there. The value stored into eetlp_prefix_max is directly derived from device's Max End-End TLP Prefixes and does not consider limitations imposed by bridges or the Root Port beyond supported/not supported flags. This is intentional for two reasons: 1) PCIe r6.2 spec sections 2.2.10.4 & 6.2.4.4 indicate that a TLP is malformed only if the number of prefixes exceed the number of Max End-End TLP Prefixes, which seems to be the case even if the device could never receive that many prefixes due to smaller maximum imposed by a bridge or the Root Port. If TLP parsing is later added, this distinction is significant in interpreting what is logged by the TLP Prefix Log registers and the value matching to the Malformed TLP threshold is going to be more useful. 2) TLP Prefix handling happens autonomously on a low layer and the value in eetlp_prefix_max is not programmed anywhere by the kernel (i.e., there is no limiter OS can control to prevent sending more than N TLP Prefixes). Link: https://lore.kernel.org/r/20250114170840.1633-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
2025-01-14PCI: Use unsigned int i in pcie_read_tlp_log()Ilpo Järvinen
Loop variable i counting from 0 upwards does not need to be signed so make it unsigned int. Link: https://lore.kernel.org/r/20250114170840.1633-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-01-14PCI: Use same names in pcie_read_tlp_log() prototype and definitionIlpo Järvinen
pcie_read_tlp_log()'s prototype and function signature diverged due to changes made while applying. Make the parameters of pcie_read_tlp_log() named identically. Link: https://lore.kernel.org/r/20250114170840.1633-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
2025-01-14PCI: Add defines for TLP Header/Prefix log sizesIlpo Järvinen
Add defines for AER and DPC capabilities TLP Header Logging register sizes (PCIe r6.2, sec 7.8.4 / 7.9.14) and replace literals with them. Link: https://lore.kernel.org/r/20250114170840.1633-4-ilpo.jarvinen@linux.intel.com Suggested-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2025-01-14PCI: Move TLP Log handling to its own fileIlpo Järvinen
TLP Log is a PCIe feature and is processed only by AER and DPC. Configwise, DPC depends AER being enabled. In lack of better place, the TLP Log handling code was initially placed into pci.c but it can be easily placed in a separate file. Move TLP Log handling code to its own file under pcie/ subdirectory and include it only when AER is enabled. Link: https://lore.kernel.org/r/20250114170840.1633-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
2025-01-14PCI: Don't expose pcie_read_tlp_log() outside PCI subsystemIlpo Järvinen
pcie_read_tlp_log() was exposed by the commit 0a5a46a6a61b ("PCI/AER: Generalize TLP Header Log reading") with the intent that drivers could use it, but the PCI maintainer later decided that drivers should be encouraged to use PCI core diagnostic logging of generic AER registers rather than building their own. Drivers that currently implement their own diagnostic logging include ixgbe (ixgbe_io_error_detected()) and iwlwifi (iwl_trans_pcie_dump_regs()). Remove the unwanted EXPORT of pcie_read_tlp_log() and remove it from include/linux/aer.h. Link: https://lore.kernel.org/r/20250114170840.1633-2-ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/all/20240322193011.GA701027@bhelgaas/ Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
2024-12-18PCI: endpoint: Verify that requested BAR size is a power of twoNiklas Cassel
When allocating a BAR using pci_epf_alloc_space(), there are checks that round up the size to a power of two. However, there is no check in pci_epc_set_bar() which verifies that the requested BAR size is a power of two. Add a power of two check in pci_epc_set_bar(), so that we don't need to add such a check in each and every PCI endpoint controller driver. Link: https://lore.kernel.org/r/20241213143301.4158431-14-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-12-18PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()Niklas Cassel
A BAR of type BAR_FIXED has a fixed BAR size (the size cannot be changed). When using pci_epf_alloc_space() to allocate backing memory for a BAR, pci_epf_alloc_space() will always set the size to the fixed BAR size if the BAR type is BAR_FIXED (and will give an error if you the requested size is larger than the fixed BAR size). However, some drivers might not call pci_epf_alloc_space() before calling pci_epc_set_bar(), so add a check in pci_epc_set_bar() to ensure that an EPF driver cannot set a size different from the fixed BAR size, if the BAR type is BAR_FIXED. The pci_epc_function_is_valid() check is removed because this check is now done by pci_epc_get_features(). Link: https://lore.kernel.org/r/20241213143301.4158431-13-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-12-18PCI: artpec6: Implement dw_pcie_ep operation get_featuresNiklas Cassel
All non-DWC EPC drivers implement (struct pci_epc *)->ops->get_features(). All DWC EPC drivers implement (struct dw_pcie_ep *)->ops->get_features(), except for pcie-artpec6.c. epc_features has been required in pci-epf-test.c since commit 6613bc2301ba ("PCI: endpoint: Fix NULL pointer dereference for ->get_features()"). A follow-up commit will make further use of epc_features in EPC core code. Implement epc_features in the only EPC driver where it is currently not implemented. Link: https://lore.kernel.org/r/20241213143301.4158431-12-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
2024-12-18PCI: dwc: ep: Add 'address' alignment to 'size' check in ↵Niklas Cassel
dw_pcie_prog_ep_inbound_atu() dw_pcie_prog_ep_inbound_atu() is used to program an inbound iATU in "BAR Match Mode". A memory address returned by e.g. kmalloc() is guaranteed to have natural alignment (aligned to the size of the allocation). It is however not guaranteed that pci_epc_set_bar() (and thus dw_pcie_prog_ep_inbound_atu()) is supplied an address that has natural alignment. (An EPF driver can send in an arbitrary physical address to pci_epc_set_bar().) The DWC Databook description for the LWR_TARGET_RW and LWR_TARGET_HW fields in the IATU_LWR_TARGET_ADDR_OFF_INBOUND_i registers state that: "Field size depends on log2(BAR_MASK+1) in BAR match mode." I.e. only the upper bits are writable, and the number of writable bits is dependent on the configured BAR_MASK. Add a check to ensure that the physical address programmed in the iATU is aligned to the size of the BAR (BAR_MASK+1), as without this, we can get hard to debug errors, as we could write to bits that are read-only (without getting a write error), which could cause the iATU to end up redirecting to a physical address that is different from the address that we intended. Link: https://lore.kernel.org/r/20241213143301.4158431-11-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-12-18PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar()Niklas Cassel
In commit 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") set_bar() was modified to support dynamically changing the backing physical address of a BAR that was already configured. This means that set_bar() can be called twice, without ever calling clear_bar() (as calling clear_bar() would clear the BAR's PCI address assigned by the host). This can only be done if the new BAR size/flags does not differ from the existing BAR configuration. Add these missing checks. If we allow set_bar() to set e.g. a new BAR size that differs from the existing BAR size, the new address translation range will be smaller than the BAR size already determined by the host, which would mean that a read past the new BAR size would pass the iATU untranslated, which could allow the host to read memory not belonging to the new struct pci_epf_bar. While at it, add comments which clarifies the support for dynamically changing the physical address of a BAR. (Which was also missing.) Fixes: 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") Link: https://lore.kernel.org/r/20241213143301.4158431-10-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org
2024-12-18PCI: dwc: ep: Write BAR_MASK before iATU registers in pci_epc_set_bar()Niklas Cassel
The "DesignWare Cores PCI Express Controller Register Descriptions, Version 4.60a", section "1.21.70 IATU_LWR_TARGET_ADDR_OFF_INBOUND_i", fields LWR_TARGET_RW and LWR_TARGET_HW both state that: "Field size depends on log2(BAR_MASK+1) in BAR match mode." I.e. only the upper bits are writable, and the number of writable bits is dependent on the configured BAR_MASK. If we do not write the BAR_MASK before writing the iATU registers, we are relying the reset value of the BAR_MASK being larger than the requested BAR size (which is supplied in the struct pci_epf_bar which is passed to pci_epc_set_bar()). The reset value of the BAR_MASK is SoC dependent. Thus, if the struct pci_epf_bar requests a BAR size that is larger than the reset value of the BAR_MASK, the iATU will try to write to read-only bits, which will cause the iATU to end up redirecting to a physical address that is different from the address that was intended. Thus, we should always write the iATU registers after writing the BAR_MASK. Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support") Link: https://lore.kernel.org/r/20241213143301.4158431-9-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org
2024-12-13PCI/ASPM: Save parent L1SS config in pci_save_aspm_l1ss_state()Jian-Hong Pan
After 17423360a27a ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"), pci_save_aspm_l1ss_state(dev) saves the L1SS state for "dev", and pci_restore_aspm_l1ss_state(dev) restores the state for both "dev" and its parent. The problem is that unless pci_save_state() has been used in some other path and has already saved the parent L1SS state, we will restore junk to the parent, which means the L1 Substates likely won't work correctly. Save the L1SS config for both the device and its parent in pci_save_aspm_l1ss_state(). When restoring, we need both because L1SS must be enabled at the parent (the Downstream Port) before being enabled at the child (the Upstream Port). Link: https://lore.kernel.org/r/20241115072200.37509-3-jhp@endlessos.org Fixes: 17423360a27a ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218394 Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jian-Hong Pan <jhp@endlessos.org> [bhelgaas: parallel save/restore structure, simplify commit log, patch at https://lore.kernel.org/r/20241212230340.GA3267194@bhelgaas] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Jian-Hong Pan <jhp@endlessos.org> # Asus B1400CEAE
2024-12-12PCI: endpoint: Finish virtual EP removal in pci_epf_remove_vepf()Zijun Hu
When removing a virtual Endpoint, pci_epf_remove_vepf() failed to clear epf_vf->epf_pf, which caused a subsequent pci_epf_add_vepf() to incorrectly return -EBUSY: pci_epf_add_vepf(epf_pf, epf_vf) // add pci_epf_remove_vepf(epf_pf, epf_vf) // remove pci_epf_add_vepf(epf_pf, epf_vf) // add again, -EBUSY error Fix by clearing epf_vf->epf_pf in pci_epf_remove_vepf(). Link: https://lore.kernel.org/r/20241210-pci-epc-core_fix-v3-3-4d86dd573e4b@quicinc.com Fixes: 1cf362e907f3 ("PCI: endpoint: Add support to add virtual function in endpoint core") Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Cc: stable@vger.kernel.org
2024-12-12PCI: endpoint: Simplify pci_epc_get()Zijun Hu
Simplify pci_epc_get() implementation by using class_find_device_by_name(). Link: https://lore.kernel.org/r/20241210-pci-epc-core_fix-v3-2-4d86dd573e4b@quicinc.com Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2024-12-12PCI: endpoint: Destroy the EPC device in devm_pci_epc_destroy()Zijun Hu
The devm_pci_epc_destroy() comment says destroys the EPC device, but it does not actually do that since devres_destroy() does not call devm_pci_epc_release(), and it also can not fully undo what the API devm_pci_epc_create() does, so it is faulty. Fortunately, the faulty API has not been used by current kernel tree. Use devres_release() instead of devres_destroy() so the EPC device will be released. Link: https://lore.kernel.org/r/20241210-pci-epc-core_fix-v3-1-4d86dd573e4b@quicinc.com Fixes: 5e8cb4033807 ("PCI: endpoint: Add EP core layer to enable EP controller and EP functions") Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit (git 2.34.1) at 2025-09-25 12:17:36 +0000