| Age | Commit message (Collapse) | Author |
|---|
|
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
* pci/controller/layerscape:
PCI: layerscape: Use syscon_regmap_lookup_by_phandle_args
|
|
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank Li)
- Add DT binding for optional i.MX95 Refclk and driver support to enable it
if the platform hasn't enabled it (Richard Zhu)
- Configure PHY based on controller being in Root Complex or Endpoint mode
(Frank Li)
- Rely on dbi2 and iATU base addresses from DT via dw_pcie_get_resources()
instead of hardcoding them in imx6 (Richard Zhu)
- Skip controller_id computation for i.MX7D since it only has one
controller (Richard Zhu)
- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
asserted in imx_pcie_assert_core_reset() (Richard Zhu)
- Add missing reference clock enable or disable logic for IMX6SX, IMX7D,
IMX8MM (Richard Zhu)
- Remove redundant imx7d_pcie_init_phy() since imx7d_pcie_enable_ref_clk()
does the same thing (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Clean up comments and whitespace
PCI: imx6: Remove surplus imx7d_pcie_init_phy() function
PCI: imx6: Add missing reference clock disable logic
PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset()
PCI: imx6: Skip controller_id generation logic for i.MX7D
PCI: imx6: Fetch dbi2 and iATU base addesses from DT
PCI: imx6: Configure PHY based on Root Complex or Endpoint mode
PCI: imx6: Add Refclk for i.MX95 PCIe
dt-bindings: PCI: fsl,imx6q-pcie: Add Refclk for i.MX95 RC
PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
# Conflicts:
# drivers/pci/controller/dwc/pci-imx6.c
|
|
- Fix potential string truncation in dw_pcie_edma_irq_verify() (Niklas
Cassel)
- Don't wait for link up in DWC core if driver can detect Link Up event
(Krishna chaitanya chundru)
- If qcom 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya chundru)
- Use dw-rockchip dll_link_up IRQ to detect Link Up and enumerate devices
so users don't have to manually rescan (Niklas Cassel)
- In dw-rockchip, the 'sys' interrupt is required and detects Link Up
events, so tell DWC core not to wait for link up (Niklas Cassel)
- Always stop link in dw_pcie_suspend_noirq(), which is required at least
for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending PME_TURN_OFF
message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add stubs for dw_pcie_suspend_noirq() dw_pcie_resume_noirq() when
CONFIG_PCIE_DW_HOST is not defined so drivers don't need #ifdefs (Bjorn
Helgaas)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add imx6 suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program an
internal Address Translation Unit (iATU) (Frank Li)
* pci/controller/dwc:
PCI: dwc: Simplify config resource lookup
of: address: Add parent_bus_addr to struct of_pci_range
PCI: imx6: Add i.MX8MQ, i.MX8Q and i.MX95 PM support
PCI: imx6: Use DWC common suspend resume method
PCI: dwc: Add dw_pcie_suspend_noirq(), dw_pcie_resume_noirq() stubs for !CONFIG_PCIE_DW_HOST
PCI: dwc: Remove LTSSM state test in dw_pcie_suspend_noirq()
PCI: dwc: Always stop link in the dw_pcie_suspend_noirq
PCI: dw-rockchip: Don't wait for link since we can detect Link Up
PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ
PCI: qcom: Update ICC and OPP values after Link Up event
PCI: qcom: Don't wait for link if we can detect Link Up
PCI: dwc: Don't wait for link up if driver can detect Link Up event
PCI: dwc: Fix potential truncation in dw_pcie_edma_irq_verify()
# Conflicts:
# drivers/pci/controller/dwc/pci-imx6.c
|
|
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
(Krzysztof Kozlowski)
* pci/controller/dra7xx:
PCI: dra7xx: Use syscon_regmap_lookup_by_phandle_args
|
|
- Add host bridge .enable_device() and .disable_device() hooks for bridges
that need to configure things like Requester ID to StreamID mapping when
enabling devices (Frank Li)
- Add imx6 Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and .disable_device()
hooks so drivers that use pci_host_common_probe() instead of their own
.probe() have a way to set the .enable_device() callbacks (Marc Zyngier)
- Convert pcie-apple StreamID mapping configuration from a bus notifier to
the .enable_device() and .disable_device() callbacks (Marc Zyngier)
* pci/controller/iommu-map:
PCI: apple: Convert to {en,dis}able_device() callbacks
PCI: host-generic: Allow {en,dis}able_device() to be provided via pci_ecam_ops
PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
PCI: Add enable_device() and disable_device() callbacks for bridges
|
|
- Convert mobiveil-pcie.txt to YAML and update 'interrupt-names' and
'reg-names' (Frank Li)
- Add qcom DT SM8550 and SM8650 optional 'global' interrupt for link events
(Neil Armstrong)
- Add qcom DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta
Mylavarapu)
* pci/dt-bindings:
dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller
dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt
dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML
|
|
- Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing
dma_chan_rx (Mohamed Khalfella)
- Correct the DMA MEMCPY test so it doesn't fail if the Endpoint supports
both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam)
- Add pci-epf-test and pci_endpoint_test support for capabilities (Niklas
Cassel)
- Add Endpoint test for consecutive BARs (Niklas Cassel)
- Remove redundant comparison from Endpoint BAR test because a > 1MB BAR
can always be exactly covered by iterating with a 1MB buffer (Hans Zhang)
- Correct the PCI Endpoint test IOCTL return value (Manivannan Sadhasivam)
- Move PCI Endpoint tests from tools/pci to Kselftests (Manivannan
Sadhasivam)
- Convert PCI Endpoint tests to the Kselftest framework (Manivannan
Sadhasivam)
* pci/endpoint-test:
selftests: pci_endpoint: Migrate to Kselftest framework
selftests: Move PCI Endpoint tests from tools/pci to Kselftests
misc: pci_endpoint_test: Fix IOCTL return value
misc: pci_endpoint_test: Remove redundant 'remainder' test
misc: pci_endpoint_test: Add consecutive BAR test
misc: pci_endpoint_test: Add support for capabilities
PCI: endpoint: pci-epf-test: Add support for capabilities
PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test
PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error
|
|
- Destroy the EPC device in devm_pci_epc_destroy(), which previously didn't
call devres_release() (Zijun Hu)
- Simplify pci_epc_get() with class_find_device_by_name() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which previously
caused a subsequent pci_epf_add_vepf() to fail with -EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we don't
depend on the BAR_MASK reset value being larger than the requested BAR
size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent reads
from bypassing the iATU if we reduced the BAR size (Niklas Cassel)
- Verify address alignment when programming iATU so we don't attempt to
write bits that are read-only because of the BAR size, which could lead
to directing accesses to the wrong address (Niklas Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from trying to
change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint driver
sets the BAR (Niklas Cassel)
* pci/endpoint:
PCI: endpoint: Verify that requested BAR size is a power of two
PCI: endpoint: Add size check for fixed size BARs in pci_epc_set_bar()
PCI: artpec6: Implement dw_pcie_ep operation get_features
PCI: dwc: ep: Add 'address' alignment to 'size' check in dw_pcie_prog_ep_inbound_atu()
PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar()
PCI: dwc: ep: Write BAR_MASK before iATU registers in pci_epc_set_bar()
PCI: endpoint: Finish virtual EP removal in pci_epf_remove_vepf()
PCI: endpoint: Simplify pci_epc_get()
PCI: endpoint: Destroy the EPC device in devm_pci_epc_destroy()
PCI: endpoint: Replace magic number '6' by PCI_STD_NUM_BARS
|
|
- Add Microchip PCI100X device IDs (Rakesh Babu Saladi)
* pci/switchtec:
PCI: switchtec: Add Microchip PCI100X device IDs
|
|
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because the
system can't wake up from suspend (Werner Sembach)
* pci/pm:
PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1
|
|
- Move reset related sysfs code from pci.c to pci-sysfs.c where other
similar code lives (Ilpo Järvinen)
- Simplify reset_method_store() memory management by using __free() instead
of explicit kfree() cleanup (Ilpo Järvinen)
- Drop unnecessary zero initializer (Ilpo Järvinen)
* pci/pci-sysfs:
PCI/sysfs: Remove unnecessary zero in initializer
PCI/sysfs: Use __free() in reset_method_store()
PCI/sysfs: Move reset related sysfs code to correct file
|
|
- Unexport of_pci_parse_bus_range() since it's only used in of.c (Bjorn
Helgaas)
- Drop 'No bus range found' message so we don't complain when DTs don't
specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)
- Simplify devm_of_pci_get_host_bridge_resources() interface by dropping
parameters that are always the same default values (Bjorn Helgaas)
- Update comment reference to of_pci_get_host_bridge_resources(), which no
longer exists (Bjorn Helgaas)
- Rename the drivers/pci/of_property.c struct of_pci_range to
of_pci_range_entry to avoid confusion with the global of_pci_range in
include/linux/of_address.h (Bjorn Helgaas)
* pci/of:
PCI: of_property: Rename struct of_pci_range to of_pci_range_entry
sparc/PCI: Update reference to devm_of_pci_get_host_bridge_resources()
PCI: of: Simplify devm_of_pci_get_host_bridge_resources() interface
PCI: of: Drop 'No bus range found' message
PCI: Unexport of_pci_parse_bus_range()
|
|
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core logging
rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Add #defines for TLP Header/Prefix log sizes (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can read the
correct number of DWORDs from the TLP Prefix Log (Ilpo Järvinen)
- Read TLP Prefixes in addition to the Header Log in pcie_read_tlp_log()
(Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and Prefix
Log (Ilpo Järvinen)
* pci/err:
PCI: Add pcie_print_tlp_log() to print TLP Header and Prefix Log
PCI: Add TLP Prefix reading to pcie_read_tlp_log()
PCI: Store number of supported End-End TLP Prefixes
PCI: Use unsigned int i in pcie_read_tlp_log()
PCI: Use same names in pcie_read_tlp_log() prototype and definition
PCI: Add defines for TLP Header/Prefix log sizes
PCI: Move TLP Log handling to its own file
PCI: Don't expose pcie_read_tlp_log() outside PCI subsystem
|
|
- Batch sizing of multiple BARs while memory decoding is disabled instead
of disabling/enabling decoding for each BAR individually; this optimizes
virtualized environments where toggling decoding enable is expensive
(Alex Williamson)
* pci/enumeration:
PCI: Batch BAR sizing operations
|
|
- Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor BIOSes
that don't configure it correctly (Takashi Iwai)
* pci/dpc:
PCI/DPC: Quirk PIO log size for Intel Raptor Lake-P
|
|
- Update resource request API documentation to encourage callers to supply
a driver name when requesting resources (Philipp Stanner)
- Export pci_intx_unmanaged() and pcim_intx() (always managed) so callers
of pci_intx() (which is sometimes managed) can explicitly choose the one
they need (Philipp Stanner)
- Convert drivers from pci_intx() to always-managed pcim_intx() or
never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna, ntb,
qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)
- Remove pci_intx_unmanaged() since pci_intx() is now always unmanaged and
pcim_intx() is always managed (Philipp Stanner)
* pci/devres:
PCI: Remove devres from pci_intx()
net/ethernet: Use never-managed version of pci_intx()
HID: amd_sfh: Use always-managed version of pcim_intx()
wifi: qtnfmac: use always-managed version of pcim_intx()
ata: Use always-managed version of pci_intx()
PCI/MSI: Use never-managed version of pci_intx()
vfio/pci: Use never-managed version of pci_intx()
misc: Use never-managed version of pci_intx()
ntb: Use never-managed version of pci_intx()
drivers/xen: Use never-managed version of pci_intx()
PCI: Export pci_intx_unmanaged() and pcim_intx()
PCI: Encourage resource request API users to supply driver name
|
|
- Save parent L1 PM Substates config so when we restore it along with an
endpoint's config, the parent info isn't junk (Jian-Hong Pan)
* pci/aspm:
PCI/ASPM: Save parent L1SS config in pci_save_aspm_l1ss_state()
|
|
Toggling memory enable is free on bare metal, but potentially expensive
in virtualized environments as the device MMIO spaces are added and
removed from the VM address space, including DMA mapping of those spaces
through the IOMMU where peer-to-peer is supported. Currently memory
decode is disabled around sizing each individual BAR, even for SR-IOV
BARs while VF Enable is cleared.
This can be better optimized for virtual environments by sizing a set
of BARs at once, stashing the resulting mask into an array, while only
toggling memory enable once. This also naturally improves the SR-IOV
path as the caller becomes responsible for any necessary decode disables
while sizing BARs, therefore SR-IOV BARs are sized relying only on the
VF Enable rather than toggling the PF memory enable in the command
register.
Link: https://lore.kernel.org/r/20250120182202.1878581-1-alex.williamson@redhat.com
Reported-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Link: https://lore.kernel.org/r/CAHTA-uYp07FgM6T1OZQKqAdSA5JrZo0ReNEyZgQZub4mDRrV5w@mail.gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Reviewed-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Migrate the PCI endpoint test to Kselftest framework. All the tests that
were part of the previous pcitest.sh file were migrated.
Below is the list of tests converted:
1. BAR0 Test
2. BAR1 Test
3. BAR2 Test
4. BAR3 Test
5. BAR4 Test
6. BAR5 Test
7. Consecutive BAR Tests
8. Legacy IRQ Tests
9. MSI Interrupt Tests (MSI1 to MSI32)
10. MSI-X Interrupt Tests (MSI-X1 to MSI-X2048)
11. Read Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
12. Write Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
13. Copy Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
14. Read Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
15. Write Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
16. Copy Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
BAR, DMA and MEMCPY tests are added as fixture variants and can be executed
separately as below:
$ pci_endpoint_test -v BAR0
$ pci_endpoint_test -v dma
$ pci_endpoint_test -v memcpy
Link: https://lore.kernel.org/r/20250116171650.33585-5-manivannan.sadhasivam@linaro.org
Co-developed-by: Aman Gupta <aman1.gupta@samsung.com>
Co-developed-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
[mani: reworked based on the IOCTL fix, cleanups, documentation, commit message]
Signed-off-by: Aman Gupta <aman1.gupta@samsung.com>
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
This just moves the existing tests under tools/pci to
tools/testing/selftests/pci_endpoint and adjusts the paths in Makefile
accordingly. Migration to Kselftest framework will be done in subsequent
commits.
Link: https://lore.kernel.org/r/20250116171650.33585-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
IOCTLs are supposed to return 0 for success and negative error codes for
failure. Currently, this driver is returning 0 for failure and 1 for
success, that's not correct. Hence, fix it!
Link: https://lore.kernel.org/r/20250116171650.33585-3-manivannan.sadhasivam@linaro.org
Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device")
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/r/YvzNg5ROnxEApDgS@kroah.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Document the PCIe controller on the IPQ5424 platform using the
IPQ9574 bindings as a fallback, since the PCIe on the IPQ5424
is similar to IPQ9574.
Link: https://lore.kernel.org/r/20241213134950.234946-2-quic_mmanikan@quicinc.com
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPU. This interrupt can be used by the device driver to handle
PCIe link specific events such as Link up and Link down, which give the
driver a chance to start bus enumeration on its own when link is up and
initiate link training if link goes to a bad state. The PCIe driver can
still work without this interrupt but it will provide a nice user
experience when device gets plugged and removed.
Document the interrupt as optional for SM8550 and SM8650 platforms.
Link: https://lore.kernel.org/r/20241126-topic-sm8x50-pcie-global-irq-v1-1-4049cfccd073@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Convert device tree binding document mobiveil-pcie.txt to YAML format
and merge layerscape-pcie-gen4.txt into this file.
Additional changes:
- interrupt-names: "aer", "pme", "intr", which align order in examples.
- reg-names: reorder as csr_axi_slave, config_axi_slave to match
layerscape-pcie-gen4 and existing Layerscape DTS users.
Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dtb: /soc/pcie@3400000: failed to match any schema with compatible: ['fsl,lx2160a-pcie']
Link: https://lore.kernel.org/r/20241211171318.4129818-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: fix typos, whitespace, consistent bus-range usage]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add Microchip parts to the Device ID table so the driver supports PCI100x
devices.
Add a new macro to quirk the Microchip Switchtec PCI100x parts to allow DMA
access via NTB to work when the IOMMU is turned on.
PCI100x family has 6 variants; each variant is designed for different
application usages, different port counts and lane counts:
PCI1001 has 1 x4 upstream port and 3 x4 downstream ports
PCI1002 has 1 x4 upstream port and 4 x2 downstream ports
PCI1003 has 2 x4 upstream ports, 2 x2 upstream ports, and 2 x2
downstream ports
PCI1004 has 4 x4 upstream ports
PCI1005 has 1 x4 upstream port and 6 x2 downstream ports
PCI1006 has 6 x2 upstream ports and 2 x2 downstream ports
[Historical note: these parts use PCI_VENDOR_ID_EFAR (0x1055), from EFAR
Microsystems, which was acquired in 1996 by Standard Microsystems Corp,
which was acquired by Microchip Technology in 2012. The PCI-SIG confirms
that Vendor ID 0x1055 is assigned to Microchip even though it's not
visible via https://pcisig.com/membership/member-companies]
Link: https://lore.kernel.org/r/20250120095524.243103-1-Saladi.Rakeshbabu@microchip.com
Signed-off-by: Rakesh Babu Saladi <Saladi.Rakeshbabu@microchip.com>
[bhelgaas: Vendor ID history]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Logan Gunthorpe <logang@deltatee.com>
|
|
A BAR size is always a power of two. buf_size = min(SZ_1M, bar_size).
If the BAR size is <= 1MB, there will be one iteration, no remainder.
If the BAR size is > 1MB, there will be more than one iteration, but the
size will always be evenly divisible by 1MB, so no remainder.
Link: https://lore.kernel.org/r/20250109094556.1724663-2-18255117159@163.com
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add a more advanced BAR test that writes all BARs in one go, and then reads
them back and verifies that the value matches the BAR number bitwise OR'ed
with offset, this allows us to verify:
- The BAR number was what we intended to read
- The offset was what we intended to read
This allows us to detect potential address translation issues on the EP.
Reading back the BAR directly after writing will not allow us to detect the
case where inbound address translation on the endpoint incorrectly causes
multiple BARs to be redirected to the same memory region (within the EP).
Link: https://lore.kernel.org/r/20241116032045.2574168-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The test BAR is on the EP side is allocated using pci_epf_alloc_space(),
which allocates the backing memory using dma_alloc_coherent(), which will
return zeroed memory regardless of __GFP_ZERO was set or not.
This means that running a new version of pci-endpoint-test.c (host side)
with an old version of pci-epf-test.c (EP side) will not see any
capabilities being set (as intended), so this is backwards compatible.
Additionally, the EP side always allocates at least 128 bytes for the test
BAR (excluding the MSI-X table), this means that adding another register at
offset 0x30 is still within the 128 available bytes.
For now, we only add the CAP_UNALIGNED_ACCESS capability.
If CAP_UNALIGNED_ACCESS is set, that means that the EP side supports
reading/writing to an address without any alignment requirements.
Thus, if CAP_UNALIGNED_ACCESS is set, make sure that the host side does
not add any extra padding to the buffers that we allocate (which was only
done in order to get the buffers to satisfy certain alignment requirements
by the endpoint controller).
Link: https://lore.kernel.org/r/20241203063851.695733-6-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
The test BAR is on the EP side is allocated using pci_epf_alloc_space(),
which allocates the backing memory using dma_alloc_coherent(), which will
return zeroed memory regardless of __GFP_ZERO was set or not.
This means that running a new version of pci-endpoint-test.c (host side)
with an old version of pci-epf-test.c (EP side) will not see any
capabilities being set (as intended), so this is backwards compatible.
Additionally, the EP side always allocates at least 128 bytes for the test
BAR (excluding the MSI-X table), this means that adding another register at
offset 0x30 is still within the 128 available bytes.
For now, we only add the CAP_UNALIGNED_ACCESS capability.
Set CAP_UNALIGNED_ACCESS if the EPC driver can handle any address (because
it implements the .align_addr callback).
Link: https://lore.kernel.org/r/20241203063851.695733-5-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
Currently, if DMA MEMCPY test is requested by the host, and if the endpoint
DMA controller supports DMA_PRIVATE, the test will fail. This is not
correct since there is no check for DMA_MEMCPY capability and the DMA
controller can support both DMA_PRIVATE and DMA_MEMCPY.
Fix the check and also reword the error message.
Link: https://lore.kernel.org/r/20250116171650.33585-2-manivannan.sadhasivam@linaro.org
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Reported-by: Niklas Cassel <cassel@kernel.org>
Closes: https://lore.kernel.org/linux-pci/Z3QtEihbiKIGogWA@ryzen
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
If dma_chan_tx allocation fails, set dma_chan_rx to NULL after it is
freed.
Link: https://lore.kernel.org/r/20241227160841.92382-1-khalfella@gmail.com
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Signed-off-by: Mohamed Khalfella <khalfella@gmail.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
If platform_get_resource_byname("config") fails, return error immediately
and unindent the normal path. No functional change intended.
Link: https://lore.kernel.org/r/20250117235119.712043-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
For readability, fix typos and comments that needlessly exceed 80 columns.
Link: https://lore.kernel.org/r/20250118210727.795559-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
Previously there were two definitions of struct of_pci_range: one in
include/linux/of_address.h and another local to drivers/pci/of_property.c.
Rename the local struct of_pci_range to of_pci_range_entry to avoid
confusion.
Link: https://lore.kernel.org/r/20250117161037.643953-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
|
|
Add a new field called 'parent_bus_addr' to struct of_pci_range to use
when retrieving parent bus address information.
Refer to the diagram below to better understand that the bus fabric in
some systems (like i.MX8QXP) does not always use a 1:1 address map
between input and output.
Currently, many controller drivers use the cpu_addr_fixup() callback
that would often hardcode address translation directly in the code, e.g.,
"cpu_addr & CDNS_PLAT_CPU_TO_BUS_ADDR" or "cpu_addr + BUS_IATU_OFFSET",
etc., even though those translations *should* be described via DT.
However, the cpu_addr_fixup() can be eliminated if DT correctly reflects
hardware behavior and drivers use 'parent_bus_addr' in struct of_pci_range.
┌─────────┐ ┌────────────┐
┌─────┐ │ │ IA: 0x8ff8_0000 │ │
│ CPU ├───►│ ┌────►├─────────────────┐ │ PCI │
└─────┘ │ │ │ IA: 0x8ff0_0000 │ │ │
CPU Addr │ │ ┌─►├─────────────┐ │ │ Controller │
0x7ff8_0000─┼───┘ │ │ │ │ │ │
│ │ │ │ │ │ │ PCI Addr
0x7ff0_0000─┼──────┘ │ │ └──► IOSpace ─┼────────────►
│ │ │ │ │ 0
0x7000_0000─┼────────►├─────────┐ │ │ │
└─────────┘ │ └──────► CfgSpace ─┼────────────►
BUS Fabric │ │ │ 0
│ │ │
└──────────► MemSpace ─┼────────────►
IA: 0x8000_0000 │ │ 0x8000_0000
└────────────┘
bus@5f000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x80000000 0x0 0x70000000 0x10000000>;
pcie@5f010000 {
compatible = "fsl,imx8q-pcie";
reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
reg-names = "dbi", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
<0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
...
};
};
In the diagram above, the 'parent_bus_addr' field in struct of_pci_range
can indicate internal address (IA) address information.
Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-1-c4bfa5193288@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add i.MX8MQ, i.MX8Q and i.MX95 PCIe suspend/resume support.
Link: https://lore.kernel.org/r/20241126075702.4099164-10-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
Call common DWC suspend/resume function. Use DWC common iATU method to
send out PME_TURN_OFF message.
In old DWC implementations, PCIE_ATU_INHIBIT_PAYLOAD in iATU Ctrl2 register
is reserved, so the generic DWC implementation of sending the PME_Turn_Off
message using a dummy MMIO write cannot be used. Use the previous method to
kick off PME_TURN_OFF message for these platforms.
The System Reset Control (SRC) interface is used to toggle 'turnoff_reset'
to send PME_TURN_OFF and since the DWC implementation is used, it is not
needed now.
Replace the imx_pcie_stop_link() and imx_pcie_host_exit() by
dw_pcie_suspend_noirq() in imx_pcie_suspend_noirq().
Since dw_pcie_suspend_noirq() already does these, see below call stack:
dw_pcie_suspend_noirq()
dw_pcie_stop_link()
imx_pcie_stop_link()
pci->pp.ops->deinit()
imx_pcie_host_exit()
Replace the imx_pcie_host_init(), dw_pcie_setup_rc() and
imx_pcie_start_link() by dw_pcie_resume_noirq() in imx_pcie_resume_noirq().
Since dw_pcie_resume_noirq() already does these, see below call stack:
dw_pcie_resume_noirq()
pci->pp.ops->init()
imx_pcie_host_init()
dw_pcie_setup_rc()
dw_pcie_start_link()
imx_pcie_start_link(;
Link: https://lore.kernel.org/r/20241126075702.4099164-9-hongxing.zhu@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
!CONFIG_PCIE_DW_HOST
Previously pcie-designware.h declared dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq() unconditionally, even though they were only
implemented when CONFIG_PCIE_DW_HOST was defined.
Add no-op stubs for them when CONFIG_PCIE_DW_HOST is not defined so
drivers that support both Root Complex and Endpoint modes don't need
Link: https://lore.kernel.org/r/20250117213810.GA656803@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. This hybrid nature is undesirable.
Since all users of pci_intx() have by now been ported either to
always-managed pcim_intx() or never-managed pci_intx_unmanaged(), the
devres functionality can be removed from pci_intx().
Consequently, pci_intx_unmanaged() is now redundant, because pci_intx()
itself is now unmanaged.
Remove the devres functionality from pci_intx(). Have all users of
pci_intx_unmanaged() call pci_intx(). Remove pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-13-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
broadcom/bnx2x and brocade/bna enable their PCI devices with
pci_enable_device(). Thus, they need the never-managed version.
Replace pci_intx() with pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-5-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
All users of amd_mp2_pci_remove(), where pci_intx() is used, call
pcim_enable_device(), which is why the driver needs the always-managed
version.
Replace pci_intx() with pcim_intx().
Link: https://lore.kernel.org/r/20241209130632.132074-12-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
qtnfmac enables its PCI device with pcim_enable_device(). Thus, it needs
the always-managed version.
Replace pci_intx() with pcim_intx().
Link: https://lore.kernel.org/r/20241209130632.132074-11-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
All users in ata enable their PCI devices with pcim_enable_device(). Thus,
they need the always-managed version.
Replace pci_intx() with pcim_intx().
Link: https://lore.kernel.org/r/20241209130632.132074-10-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Niklas Cassel <cassel@kernel.org>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
MSI sets up its own separate devres callback implicitly in
pcim_setup_msi_release(). This callback ultimately uses pci_intx(), which
is problematic since the callback runs on driver detach.
That problem has last been described here:
https://lore.kernel.org/all/ee44ea7ac760e73edad3f20b30b4d2fff66c1a85.camel@redhat.com/
Replace the call to pci_intx() with one to the never-managed version
pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-9-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
vfio enables its PCI device with pci_enable_device(). Thus, it needs the
never-managed version.
Replace pci_intx() with pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-8-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
cardreader/rtsx_pcr.c and tifm_7xx1.c enable their PCI devices with
pci_enable_device(). Thus, they need the never-managed version.
Replace pci_intx() with pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-7-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
hw/amd and how/intel enable their PCI devices with pci_enable_device().
Thus, they need the never-managed version.
Replace pci_intx() with pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-6-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> # ntb_hw_amd.c
Acked-by: Dave Jiang <dave.jiang@intel.com> # ntb_hw_gen1.c
|
|
pci_intx() is a hybrid function which can sometimes be managed through
devres. To remove this hybrid nature from pci_intx(), it is necessary to
port users to either an always-managed or a never-managed version.
xen enables its PCI device with pci_enable_device(). Thus, it needs the
never-managed version.
Replace pci_intx() with pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Juergen Gross <jgross@suse.com>
|
|
pci_intx() is a hybrid function which sometimes performs devres operations,
depending on whether pcim_enable_device() has been used to enable the
pci_dev. This sometimes-managed nature of the function is problematic.
Notably, it causes the function to allocate under some circumstances which
makes it unusable from interrupt context.
Export pcim_intx() (which is always managed) and rename __pcim_intx()
(which is never managed) to pci_intx_unmanaged() and export it as well.
Then all callers of pci_intx() can be ported to the version they need,
depending whether they use pci_enable_device() or pcim_enable_device().
Link: https://lore.kernel.org/r/20241209130632.132074-3-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
|
|
It's safe to send PME_TURN_OFF message regardless of whether the link is up
or down, so don't test the LTSSM state before sending the PME_TURN_OFF
message.
Only print an error message when the LTSSM is not in DETECT or POLL. There
shouldn't be an error when no Endpoint is connected at all.
Link: https://lore.kernel.org/r/20241210081557.163555-3-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
