summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-18ARM: ixp4xx: include irqs.h where neededArnd Bergmann
Multiple ixp4xx specific files require macros from irqs.h that were moved out from mach/irqs.h, e.g.: arch/arm/mach-ixp4xx/vulcan-pci.c:41:19: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes] arch/arm/mach-ixp4xx/vulcan-pci.c:49:10: error: implicit declaration of function 'IXP4XX_GPIO_IRQ' [-Werror,-Wimplicit-function-declaration] return IXP4XX_GPIO_IRQ(INTA); Include this header in all files that failed to build because of that. Fixes: dc8ef8cd3a05 ("ARM: ixp4xx: Convert to SPARSE_IRQ") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-18ARM: ixp4xx: mark ixp4xx_irq_setup as __initArnd Bergmann
Kbuild complains about ixp4xx_irq_setup not being __init itself in some configurations: WARNING: vmlinux.o(.text+0x85bae4): Section mismatch in reference from the function ixp4xx_irq_setup() to the function .init.text:set_handle_irq() The function ixp4xx_irq_setup() references the function __init set_handle_irq(). This is often because ixp4xx_irq_setup lacks a __init annotation or the annotation of set_handle_irq is wrong. I suspect it normally gets inlined, so we get no such warning, but clang makes this obvious when the function is left out of line. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-18ARM: ixp4xx: don't select SERIAL_OF_PLATFORMArnd Bergmann
Platforms should not normally select all the device drivers, leave that up to the user and the defconfig file. In this case, we get a warning for randconfig builds: WARNING: unmet direct dependencies detected for SERIAL_OF_PLATFORM Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && SERIAL_8250 [=n] && OF [=y] Selected by [y]: - MACH_IXP4XX_OF [=y] && ARCH_IXP4XX [=y] Fixes: 9540724ca29d ("ARM: ixp4xx: Add device tree boot support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-18firmware: trusted_foundations: add ARMv7 dependencyArnd Bergmann
The "+sec" extension is invalid for older ARM architectures, but the code can now be built on any ARM configuration: /tmp/trusted_foundations-2d0882.s: Assembler messages: /tmp/trusted_foundations-2d0882.s:194: Error: architectural extension `sec' is not allowed for the current base architecture /tmp/trusted_foundations-2d0882.s:201: Error: selected processor does not support `smc #0' in ARM mode /tmp/trusted_foundations-2d0882.s:213: Error: architectural extension `sec' is not allowed for the current base architecture /tmp/trusted_foundations-2d0882.s:220: Error: selected processor does not support `smc #0' in ARM mode Add a dependency on ARMv7 for the build. Fixes: 4cb5d9eca143 ("firmware: Move Trusted Foundations support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-18usb: dwc2: Use generic PHY width in params setupJules Maselbas
Setting params.phy_utmi_width in dwc2_lowlevel_hw_init() is pointless since it's value will be overwritten by dwc2_init_params(). This change make sure to take in account the generic PHY width information during paraminitialisation, done in dwc2_set_param_phy_utmi_width(). By doing so, the phy_utmi_width params can still be overrided by devicetree specific params and will also be checked against hardware capabilities. Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-17RDMA/efa: Fix success return value in case of errorGal Pressman
Existing code would mistakenly return success in case of error instead of a proper return value. Fixes: e9c6c5373088 ("RDMA/efa: Add common command handlers") Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-17IB/hfi1: Handle port down properly in pioMike Marciniszyn
The call to sc_buffer_alloc currently returns NULL (no buffer) or a buffer descriptor. There is a third case when the port is down. Currently that returns NULL and this prevents the caller from properly handling the sc_buffer_alloc() failure. A verbs code link test after the call is racy so the indication needs to come from the state check inside the allocation routine to be valid. Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests are added at all call sites. For verbs send, this needs to treat any error by returning a completion without any MMIO copy. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-17IB/hfi1: Handle wakeup of orphaned QPs for pioMike Marciniszyn
Once a send context is taken down due to a link failure, any QPs waiting for pio credits will stay on the waitlist indefinitely. Fix by wakeing up all QPs linked to piowait list. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-17IB/hfi1: Wakeup QPs orphaned on wait list after flushMike Marciniszyn
Once an SDMA engine is taken down due to a link failure, any waiting QPs that do not have outstanding descriptors in the ring will stay on the dmawait list as long as the port is down. Since there is no timer running, they will stay there for a long time. The fix is to wake up all iowaits linked to dmawait. The send engine will build and post packets that get flushed back. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-17IB/hfi1: Use aborts to trigger RC throttlingMike Marciniszyn
SDMA and pio flushes will cause a lot of packets to be transmitted after a link has gone down, using a lot of CPU to retransmit packets. Fix for RC QPs by recognizing the flush status and: - Forcing a timer start - Putting the QP into a "send one" mode Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-17IB/hfi1: Create inline to get extended headersMike Marciniszyn
This paves the way for another patch that reacts to a flush sdma completion for RC. Fixes: 81cd3891f021 ("IB/hfi1: Add support for 16B Management Packets") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-17IB/hfi1: Silence txreq allocation warningsMike Marciniszyn
The following warning can happen when a memory shortage occurs during txreq allocation: [10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) [10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 [10220.939247] cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0 [10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1] [10220.939261] node 0: slabs: 1026568, objs: 43115856, free: 0 [10220.939262] Call Trace: [10220.939262] node 1: slabs: 820872, objs: 34476624, free: 0 [10220.939263] dump_stack+0x5a/0x73 [10220.939265] warn_alloc+0x103/0x190 [10220.939267] ? wake_all_kswapds+0x54/0x8b [10220.939268] __alloc_pages_slowpath+0x86c/0xa2e [10220.939270] ? __alloc_pages_nodemask+0x2fe/0x320 [10220.939271] __alloc_pages_nodemask+0x2fe/0x320 [10220.939273] new_slab+0x475/0x550 [10220.939275] ___slab_alloc+0x36c/0x520 [10220.939287] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939299] ? __get_txreq+0x54/0x160 [hfi1] [10220.939310] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939312] __slab_alloc+0x40/0x61 [10220.939323] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939325] kmem_cache_alloc+0x181/0x1b0 [10220.939336] hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939348] ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1] [10220.939359] ? find_prev_entry+0xb0/0xb0 [hfi1] [10220.939371] hfi1_do_send+0x1d9/0x3f0 [hfi1] [10220.939372] process_one_work+0x171/0x380 [10220.939374] worker_thread+0x49/0x3f0 [10220.939375] kthread+0xf8/0x130 [10220.939377] ? max_active_store+0x80/0x80 [10220.939378] ? kthread_bind+0x10/0x10 [10220.939379] ret_from_fork+0x35/0x40 [10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) The shortage is handled properly so the message isn't needed. Silence by adding the no warn option to the slab allocation. Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code") Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-17IB/hfi1: Avoid hardlockup with flushlist_lockMike Marciniszyn
Heavy contention of the sde flushlist_lock can cause hard lockups at extreme scale when the flushing logic is under stress. Mitigate by replacing the item at a time copy to the local list with an O(1) list_splice_init() and using the high priority work queue to do the flushes. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-18KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real modeSuraj Jitindar Singh
The hcall H_SET_DAWR is used by a guest to set the data address watchpoint register (DAWR). This hcall is handled in the host in kvmppc_h_set_dawr() which can be called in either real mode on the guest exit path from hcall_try_real_mode() in book3s_hv_rmhandlers.S, or in virtual mode when called from kvmppc_pseries_do_hcall() in book3s_hv.c. The function kvmppc_h_set_dawr() updates the dawr and dawrx fields in the vcpu struct accordingly and then also writes the respective values into the DAWR and DAWRX registers directly. It is necessary to write the registers directly here when calling the function in real mode since the path to re-enter the guest won't do this. However when in virtual mode the host DAWR and DAWRX values have already been restored, and so writing the registers would overwrite these. Additionally there is no reason to write the guest values here as these will be read from the vcpu struct and written to the registers appropriately the next time the vcpu is run. This also avoids the case when handling h_set_dawr for a nested guest where the guest hypervisor isn't able to write the DAWR and DAWRX registers directly and must rely on the real hypervisor to do this for it when it calls H_ENTER_NESTED. Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-18KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr()Michael Neuling
Commit c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") screwed up some assembler and corrupted a pointer in r3. This resulted in crashes like the below: BUG: Kernel NULL pointer dereference at 0x000013bf Faulting instruction address: 0xc00000000010b044 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 8 PID: 1771 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc4+ #3 NIP: c00000000010b044 LR: c0080000089dacf4 CTR: c00000000010aff4 REGS: c00000179b397710 TRAP: 0300 Not tainted (5.2.0-rc4+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 42244842 XER: 00000000 CFAR: c00000000010aff8 DAR: 00000000000013bf DSISR: 42000000 IRQMASK: 0 GPR00: c0080000089dd6bc c00000179b3979a0 c008000008a04300 ffffffffffffffff GPR04: 0000000000000000 0000000000000003 000000002444b05d c0000017f11c45d0 ... NIP kvmppc_h_set_dabr+0x50/0x68 LR kvmppc_pseries_do_hcall+0xa3c/0xeb0 [kvm_hv] Call Trace: 0xc0000017f11c0000 (unreliable) kvmppc_vcpu_run_hv+0x694/0xec0 [kvm_hv] kvmppc_vcpu_run+0x34/0x48 [kvm] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm] kvm_vcpu_ioctl+0x460/0x850 [kvm] do_vfs_ioctl+0xe4/0xb40 ksys_ioctl+0xc4/0x110 sys_ioctl+0x28/0x80 system_call+0x5c/0x70 Instruction dump: 4082fff4 4c00012c 38600000 4e800020 e96280c0 896b0000 2c2b0000 3860ffff 4d820020 50852e74 508516f6 78840724 <f88313c0> f8a313c8 7c942ba6 7cbc2ba6 Fix the bug by only changing r3 when we are returning immediately. Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-17Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fixes from Al Viro: "MS_MOVE regression fix + breakage in fsmount(2) (also introduced in this cycle, along with fsmount(2) itself). I'm still digging through the piles of mail, so there might be more fixes to follow, but these two are obvious and self-contained, so there's no point delaying those..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/namespace: fix unprivileged mount propagation vfs: fsmount: add missing mntget()
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Lots of bug fixes here: 1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer. 2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John Crispin. 3) Use after free in psock backlog workqueue, from John Fastabend. 4) Fix source port matching in fdb peer flow rule of mlx5, from Raed Salem. 5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet. 6) Network header needs to be set for packet redirect in nfp, from John Hurley. 7) Fix udp zerocopy refcnt, from Willem de Bruijn. 8) Don't assume linear buffers in vxlan and geneve error handlers, from Stefano Brivio. 9) Fix TOS matching in mlxsw, from Jiri Pirko. 10) More SCTP cookie memory leak fixes, from Neil Horman. 11) Fix VLAN filtering in rtl8366, from Linus Walluij. 12) Various TCP SACK payload size and fragmentation memory limit fixes from Eric Dumazet. 13) Use after free in pneigh_get_next(), also from Eric Dumazet. 14) LAPB control block leak fix from Jeremy Sowden" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits) lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl ...
2019-06-17fs/namespace: fix unprivileged mount propagationChristian Brauner
When propagating mounts across mount namespaces owned by different user namespaces it is not possible anymore to move or umount the mount in the less privileged mount namespace. Here is a reproducer: sudo mount -t tmpfs tmpfs /mnt sudo --make-rshared /mnt # create unprivileged user + mount namespace and preserve propagation unshare -U -m --map-root --propagation=unchanged # now change back to the original mount namespace in another terminal: sudo mkdir /mnt/aaa sudo mount -t tmpfs tmpfs /mnt/aaa # now in the unprivileged user + mount namespace mount --move /mnt/aaa /opt Unfortunately, this is a pretty big deal for userspace since this is e.g. used to inject mounts into running unprivileged containers. So this regression really needs to go away rather quickly. The problem is that a recent change falsely locked the root of the newly added mounts by setting MNT_LOCKED. Fix this by only locking the mounts on copy_mnt_ns() and not when adding a new mount. Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies") Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Tested-by: Christian Brauner <christian@brauner.io> Acked-by: Christian Brauner <christian@brauner.io> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-06-17vfs: fsmount: add missing mntget()Eric Biggers
sys_fsmount() needs to take a reference to the new mount when adding it to the anonymous mount namespace. Otherwise the filesystem can be unmounted while it's still in use, as found by syzkaller. Reported-by: Mark Rutland <mark.rutland@arm.com> Reported-by: syzbot+99de05d099a170867f22@syzkaller.appspotmail.com Reported-by: syzbot+7008b8b8ba7df475fdc8@syzkaller.appspotmail.com Fixes: 93766fbd2696 ("vfs: syscall: Add fsmount() to create a mount for a superblock") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-06-17cifs: fix GlobalMid_Lock bug in cifs_reconnectRonnie Sahlberg
We can not hold the GlobalMid_Lock spinlock during the dfs processing in cifs_reconnect since it invokes things that may sleep and thus trigger : BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:23 Thus we need to drop the spinlock during this code block. RHBZ: 1716743 Cc: stable@vger.kernel.org Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-06-17SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing writeSteve French
Some servers such as Windows 10 will return STATUS_INSUFFICIENT_RESOURCES as the number of simultaneous SMB3 requests grows (even though the client has sufficient credits). Return EAGAIN on STATUS_INSUFFICIENT_RESOURCES so that we can retry writes which fail with this status code. This (for example) fixes large file copies to Windows 10 on fast networks. Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-06-17Merge branch 'erofs_fix' into staging-linusGreg Kroah-Hartman
A branch is needed here to get the fix into staging-next as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17staging: erofs: add requirements field in superblockGao Xiang
There are some backward incompatible features pending for months, mainly due to on-disk format expensions. However, we should ensure that it cannot be mounted with old kernels. Otherwise, it will causes unexpected behaviors. Fixes: ba2b77a82022 ("staging: erofs: add super block operations") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17Merge tag 'iio-fixes-for-5.2b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 5.2 cycle. * ad7150 - sense of bit for controlling adaptive vs fixed threshold was flipped. * adt7316 - Fix a build issue due to wrong headers for gpio usage. * lsm6dsx - correctly suspend / resume i2c slaves when the host goes to sleep. * mlx90632 - relax a compatability check to allow for newer devices. Also one counters fix * counter/ftm-quaddec - missing dependencies in Kconfig. * tag 'iio-fixes-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: counter/ftm-quaddec: Add missing dependencies in Kconfig staging: iio: adt7316: Fix build errors when GPIOLIB is not set iio: temperature: mlx90632 Relax the compatibility check iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller staging:iio:ad7150: fix threshold mode config bit
2019-06-17Merge branch 'tcp-fixes'David S. Miller
Eric Dumazet says: ==================== tcp: make sack processing more robust Jonathan Looney brought to our attention multiple problems in TCP stack at the sender side. SACK processing can be abused by malicious peers to either cause overflows, or increase of memory usage. First two patches fix the immediate problems. Since the malicious peers abuse senders by advertizing a very small MSS in their SYN or SYNACK packet, the last two patches add a new sysctl so that admins can chose a higher limit for MSS clamping. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17arm64: ssbd: explicitly depend on <linux/prctl.h>Anisse Astier
Fix ssbd.c which depends implicitly on asm/ptrace.h including linux/prctl.h (through for example linux/compat.h, then linux/time.h, linux/seqlock.h, linux/spinlock.h and linux/irqflags.h), and uses PR_SPEC* defines. This is an issue since we'll soon be removing the include from asm/ptrace.h. Fixes: 9cdc0108baa8 ("arm64: ssbd: Add prctl interface for per-thread mitigation") Cc: stable@vger.kernel.org Signed-off-by: Anisse Astier <aastier@freebox.fr> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-17Merge tag 'riscv-for-v5.2/fixes-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "This contains fixes, defconfig, and DT data changes for the v5.2-rc series. The fixes are relatively straightforward: - Addition of a TLB fence in the vmalloc_fault path, so the CPU doesn't enter an infinite page fault loop - Readdition of the pm_power_off export, so device drivers that reassign it can now be built as modules - A udelay() fix for RV32, fixing a miscomputation of the delay time - Removal of deprecated smp_mb__*() barriers This also adds initial DT data infrastructure for arch/riscv, along with initial data for the SiFive FU540-C000 SoC and the corresponding HiFive Unleashed board. We also update the RV64 defconfig to include some core drivers for the FU540 in the build" * tag 'riscv-for-v5.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove unused barrier defines riscv: mm: synchronize MMU after pte change riscv: dts: add initial board data for the SiFive HiFive Unleashed riscv: dts: add initial support for the SiFive FU540-C000 SoC dt-bindings: riscv: convert cpu binding to json-schema dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540 arch: riscv: add support for building DTB files from DT source data riscv: Fix udelay in RV32. riscv: export pm_power_off again RISC-V: defconfig: enable clocks, serial console
2019-06-17block: fix page leak when merging to same pageChristoph Hellwig
When multiple iovecs reference the same page, each get_user_page call will add a reference to the page. But once we've created the bio that information gets lost and only a single reference will be dropped after I/O completion. Use the same_page information returned from __bio_try_merge_page to drop additional references to pages that were already present in the bio. Based on a patch from Ming Lei. Link: https://lkml.org/lkml/2019/4/23/64 Fixes: 576ed913 ("block: use bio_add_page in bio_iov_iter_get_pages") Reported-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-17block: return from __bio_try_merge_page if merging occured in the same pageChristoph Hellwig
We currently have an input same_page parameter to __bio_try_merge_page to prohibit merging in the same page. The rationale for that is that some callers need to account for every page added to a bio. Instead of letting these callers call twice into the merge code to account for the new vs existing page cases, just turn the paramter into an output one that returns if a merge in the same page occured and let them act accordingly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-17ASoC: Add missing newline at end of fileGeert Uytterhoeven
"git diff" says: \ No newline at end of file after modifying the files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: rt5677: move jack-detect init to i2c probeFletcher Woodruff
This patch moves the code to select the gpios for jack detection from rt5677_probe to rt5677_init_irq (called from rt5677_i2c_probe). It also sets some registers to fix bugs related to jack detection, and adds some constants and comments to make it easier to understand what certain register settings are controlling. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: rt5677: fall back to DT prop names on errorFletcher Woodruff
The rt5677 driver uses ACPI-style property names to read from the device API. However, these do not match the property names in _DSD used on the Chromebook Pixel 2015, which are closer to the Device Tree style. Unify the two functions for reading from the device API so that they try ACPI-style names first and fall back to the DT names on error. With this patch, plugging and unplugging the headphone jack switches between headphones and speakers automatically. Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: disallow building without CONFIG_PCI againArnd Bergmann
Compile-testing without PCI just causes warnings: sound/soc/sof/sof-pci-dev.c:330:13: error: 'sof_pci_remove' defined but not used [-Werror=unused-function] static void sof_pci_remove(struct pci_dev *pci) ^~~~~~~~~~~~~~ sound/soc/sof/sof-pci-dev.c:230:12: error: 'sof_pci_probe' defined but not used [-Werror=unused-function] static int sof_pci_probe(struct pci_dev *pci, ^~~~~~~~~~~~~ I tried to fix this in a way that would still allow compile tests, but it got too ugly, so this just reverts the patch that allowed it in the first place. Most architectures do allow enabling PCI, so the value of the COMPILE_TEST alternative was not very high to start with. Fixes: e13ef82a9ab8 ("ASoC: SOF: add COMPILE_TEST for PCI options") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17Btrfs: fix failure to persist compression property xattr deletion on fsyncFilipe Manana
After the recent series of cleanups in the properties and xattrs modules that landed in the 5.2 merge window, we ended up with a regression where after deleting the compression xattr property through the setflags ioctl, we don't set the BTRFS_INODE_COPY_EVERYTHING flag in the inode anymore. As a consequence, if the inode was fsync'ed when it had the compression property set, after deleting the compression property through the setflags ioctl and fsync'ing again the inode, the log will still contain the compression xattr, because the inode did not had that bit set, which made the fsync not delete all xattrs from the log and copy all xattrs from the subvolume tree to the log tree. This regression happens due to the fact that that series of cleanups made btrfs_set_prop() call the old function do_setxattr() (which is now named btrfs_setxattr()), and not the old version of btrfs_setxattr(), which is now called btrfs_setxattr_trans(). Fix this by setting the BTRFS_INODE_COPY_EVERYTHING bit in the current btrfs_setxattr() function and remove it from everywhere else, including its setup at btrfs_ioctl_setflags(). This is cleaner, avoids similar regressions in the future, and centralizes the setup of the bit. After all, the need to setup this bit should only be in the xattrs module, since it is an implementation of xattrs. Fixes: 04e6863b19c722 ("btrfs: split btrfs_setxattr calls regarding transaction") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-06-17riscv: remove unused barrier definesRolf Eike Beer
They were introduced in commit fab957c11efe ("RISC-V: Atomic and Locking Code") long after commit 2e39465abc4b ("locking: Remove deprecated smp_mb__() barriers") removed the remnants of all previous instances from the tree. Signed-off-by: Rolf Eike Beer <eb@emlix.com> [paul.walmsley@sifive.com: stripped spurious mbox header from patch description; fixed commit references in patch header] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-17usb: chipidea: udc: workaround for endpoint conflict issuePeter Chen
An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub. The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs. There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest. Cc: <stable@vger.kernel.org> #v3.14+ Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17ASoC: SOF: Intel: hda: make sure RUN bit setting to 0 during clear stream statusZhu Yingjiang
Before clearing stream statuses, ensure RUN bit update has taken effect by reading the value back. Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: make sure DMA is start/stop by read the RUN bitZhu Yingjiang
As per the HW recommendation, after setting the RUN bit (start as 1, stop as 0), software must read the bit back to make sure the bit is set right, before modifying related control registers/re-starting the DMA engine. Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: clear stream status and wakests properlyRanjani Sridharan
Stream status and WAKESTS registers need to be cleared by writing to them with snd_sof_dsp_write(). snd_sof_dsp_update_bits() only writes if the value is changed and will result in not clearing the status. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: use the defined stop chip in suspendZhu Yingjiang
Unify suspend code by using SOF common function hda_dsp_ctrl_stop_chip() which can handle both HDA and non-HDA cases. Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: add function for hda stop chipZhu Yingjiang
Add common hda_dsp_ctrl_stop_chip() function to stop controller with the same function handling both HDA and non-HDA cases. This function disables IRQs and clears status masks. When CONFIG_SND_SOC_SOF_HDA is defined, also disables the CORB/RIRB, and stops i/o. Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: use the SOF defined ppcap functionsZhu Yingjiang
Unify ppcap function setup by using SOF common functions for both HDA and non-HDA cases. Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda-stream: fix a deadlock with bus->reg_lockKeyon Jie
We should use irq disabled mode when read/write hda registers from thread context, as we need to hold the same bus->reg_lock in interrupt context hda_dsp_stream_interrupt(), otherwise, when we are holding the lock in hda_dsp_stream_hw_free() and the interrupt arrives, we will get deadlock in the interrupt handler. Error logs like this: [ 5.603606] CPU0 [ 5.603606] ---- [ 5.603607] lock(&(&bus->reg_lock)->rlock); [ 5.603608] <Interrupt> [ 5.603609] lock(&(&bus->reg_lock)->rlock); [ 5.603610] *** DEADLOCK *** [ 5.603611] 2 locks held by pulseaudio/2329: [ 5.603612] #0: 000000005fcf26c6 (&card->mutex/1){+.+.}, at: dpcm_fe_dai_hw_free+0x2b/0x110 [snd_soc_core] [ 5.603619] #1: 00000000ef369faf (&rtd->pcm_mutex){+.+.}, at: soc_pcm_hw_free+0x2e/0x1c0 [snd_soc_core] The fix is simple, let's switch to use spin_lock/unlock_irq(). Reported-by: Xun Zhang <xun2.zhang@intel.com> Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: modify stream interrupt handlerRanjani Sridharan
Modify the stream interrupt handler to always wake up the IRQ thread if the status register is valid. The IRQ thread performs the check for stream interrupts and RIRB interrupts in a loop to handle the case of missed interrupts when an unsolicited response from the codec is received just before the stream interrupt handler is completed. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: couple host and link DMA during FE hw_freeRanjani Sridharan
Host and link DMA are decoupled during FE hw_params. So, they must be coupled in hw_free if the link DMA channel is idle. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: release link DMA for paused streams during suspendRanjani Sridharan
Paused streams do not get suspended when the system enters S3. So, clear and release link DMA channel for such streams in the hda_dsp_set_hw_params_upon_resume() callback. Also, invalidate the link DMA channel in the DAI config before restoring the dai config upon resume. Also, modify the signature for the set_hw_params_upon_resume() op to return an int. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: reserve host DMA channel for hostless streamsRanjani Sridharan
Due to the HW programming sequence requirement that the host and link DMA channels need to be coupled/decoupled during pcm hw_params, the host DMA channel corresponding to the link DMA channel in use for hostless streams needs to be reserved. This is achieved by adding a host_reserved flag in the sof_intel_hda_stream structure which is checked when assigning a host DMA channel. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: assign link DMA channel at run-timeRanjani Sridharan
The recommended HDA HW programming sequence for setting the DMA format requires that the link DMA and host DMA channels be coupled before setting the format. This change means that host DMA or link DMA channels be reserved even if only one is used. Statically assigned link DMA channels would mean that all the corresponding host DMA channels will need to be reserved, leaving only a few channels available at run-time. So, the suggestion here is to switch to dynamically assigning both host DMA channels and link DMA channels are run-time. The host DMA channel is assigned when the pcm is opened as before. While choosing the link DMA channel, if the host DMA channel corresponding to the link DMA channel is already taken, the proposed method checks to make sure that the BE is connected to the FE that has been assigned this host DMA channel. Once the link DMA channel is assigned, an IPC is sent to the DSP to set the link DMA channel. The link DMA channel is freed during hw_free() and also in the SUSPEND trigger callback. It will be re-assigned when hw_params are set upon resume. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: topology: add cpu_dai_name for DAIsRanjani Sridharan
Add the cpu_dai_name member to snd_sof_dai and save the cpu_dai_name while setting the DAI config. The internal SOF representation will have to change at a later point as well when we have multiple CPU dais. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: SOF: Intel: hda: add new macro hstream_to_sof_hda_stream()Ranjani Sridharan
Add a new macro to get sof_intel_hda_stream from hdac_ext_stream. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-22 17:51:42 +0000