| Age | Commit message (Collapse) | Author |
|---|
|
Commit 9748dbc9f265 ("net/smc: Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct smc_clc_v2_extension_fixed` and
`struct smc_clc_smcd_v2_extension_fixed`. We want to ensure that when
new members need to be added to the flexible structures, they are
always included within these tagged structs.
So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Link: https://patch.msgid.link/ZrVBuiqFHAORpFxE@cute
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit d88cabfd9abc ("nfp: Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct nfp_dump_tl_hdr`. We want
to ensure that when new members need to be added to the flexible
structure, they are always included within this tagged struct.
So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ZrVB43Hen0H5WQFP@cute
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Remove unnecessary flex-array member `pad[]` and refactor the related
code a bit.
Fix the following warning:
net/sched/act_ct.c:57:29: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZrY0JMVsImbDbx6r@cute
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr Machata says:
====================
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patchset increase the next hop weight from u8 to u16.
Patch #1 adds a flag that indicates whether the reserved fields are zeroed.
This is a follow-up to a new fix merged in commit 6d745cd0e972 ("net:
nexthop: Initialize all fields in dumped nexthops"). The theory behind this
patch is that there is a strict ordering between the fields actually being
zeroed, the kernel declaring that they are, and the kernel repurposing the
fields. Thus clients can use the flag to tell if it is safe to interpret
the reserved fields in any way.
Patch #2 contains the substantial code and the commit message covers the
details of the changes.
Patches #3 to #6 add selftests.
====================
Link: https://patch.msgid.link/cover.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that attempt to create NH groups that use full 16 bits of NH
weight.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/101cdd3f2bfd9511c9bec95f909d20ff56f70ba5.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that exercise full 16 bits of NH weight.
Like in the previous patch, omit the 255:65535 test when KSFT_MACHINE_SLOW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/a91d6ead9d1b1b4b7e276ca58a71ef814f42b7dd.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that exercise full 16 bits of NH weight.
To test the 255:65535, it is necessary to run more packets than for the
other tests. On a debug kernel, the test can take up to a minute, therefore
avoid the test when KSFT_MACHINE_SLOW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c0c257c00ad30b07afc3fa5e2afd135925405544.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the context of an offloaded datapath, it may take a while for the ip
link stats to be updated. This causes the test to fail when MZ_DELAY is too
low. Sleep after the packets are sent for the link stats to get up to date.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/8b1971d948273afd7de2da3d6a2ba35200540e55.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/483e2fcf4beb0d9135d62e7d27b46fa2685479d4.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are many unpatched kernel versions out there that do not initialize
the reserved fields of struct nexthop_grp. The issue with that is that if
those fields were to be used for some end (i.e. stop being reserved), old
kernels would still keep sending random data through the field, and a new
userspace could not rely on the value.
In this patch, use the existing NHA_OP_FLAGS, which is currently inbound
only, to carry flags back to the userspace. Add a flag to indicate that the
reserved fields in struct nexthop_grp are zeroed before dumping. This is
reliant on the actual fix from commit 6d745cd0e972 ("net: nexthop:
Initialize all fields in dumped nexthops").
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/21037748d4f9d8ff486151f4c09083bcf12d5df8.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
as it doesn't seem to offer anything of value.
There's only 1 trivial user:
int lowpan_ndisc_is_useropt(u8 nd_opt_type) {
return nd_opt_type == ND_OPT_6CO;
}
but there's no harm to always treating that as
a useropt...
Cc: David Ahern <dsahern@kernel.org>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20240730003010.156977-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
eth: fbnic: add basic stats
Add basic interface stats to fbnic.
v1: https://lore.kernel.org/20240807022631.1664327-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20240810054322.2766421-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_stat_ops and export the basic per-queue stats.
This interface expect users to set the values that are used
either to zero or to some other preserved value (they are 0xff by
default). So here we export bytes/packets/drops from tx and rx_stats
plus set some of the values that are exposed by queue stats
to zero.
$ cd tools/testing/selftests/drivers/net && ./stats.py
[...]
Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240810054322.2766421-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Count packets, bytes and drop on the datapath, and report
to the user. Since queues are completely freed when the
device is down - accumulate the stats in the main netdev struct.
This means that per-queue stats will only report values since
last reset (per qstat recommendation).
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240810054322.2766421-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski says:
====================
ethtool: rss: driver tweaks and netlink context dumps
This series is a semi-related collection of RSS patches.
Main point is supporting dumping RSS contexts via ethtool netlink.
At present additional RSS contexts can be queried one by one, and
assuming user know the right IDs. This series uses the XArray
added by Ed to provide netlink dump support for ETHTOOL_GET_RSS.
Patch 1 is a trivial selftest debug patch.
Patch 2 coverts mvpp2 for no real reason other than that I had
a grand plan of converting all drivers at some stage.
Patch 3 removes a now moot check from mlx5 so that all tests
can pass.
Patch 4 and 5 make a bit used for context support optional,
for easier grepping of drivers which need converting
if nothing else.
Patch 6 OTOH adds a new cap bit; some devices don't support
using a different key per context and currently act
in surprising ways.
Patch 7 and 8 update the RSS netlink code to use XArray.
Patch 9 and 10 add support for dumping contexts.
Patch 11 and 12 are small adjustments to spec and a new test.
I'm getting distracted with other work, so probably won't have
the time soon to complete next steps, but things which are missing
are (and some of these may be bad ideas):
- better discovery
Some sort of API to tell the user who many contexts the device
can create. Upper bound, devices often share contexts between
ports etc. so it's hard to tell exactly and upfront number of
contexts for a netdev. But order of magnitude (4 vs 10s) may
be enough for container management system to know whether to bother.
- create/modify/delete via netlink
The only question here is how to handle all the tricky IOCTL
legacy. "No change" maps trivially to attribute not present.
"reset" (indir_size = 0) probably needs to be a new NLA_FLAG?
- better table size handling
The current API assumes the LUT has fixed size, which isn't
true for modern devices. We should have better APIs for the
drivers to resize the tables, and in user facing API -
the ability to specify pattern and min size rather than
exact table expected (sort of like ethtool CLI already does).
- recounted / socket-bound contexts
Support for contexts which get "cleaned up" when their parent
netlink socket gets closed. The major catch is that ntuple
filters (which we don't currently track) depend on the context,
so we need auto-removal for both.
v5:
- fix build
v4: https://lore.kernel.org/20240809031827.2373341-1-kuba@kernel.org
- adjust to the meaning of max context from net
v3: https://lore.kernel.org/20240806193317.1491822-1-kuba@kernel.org
- quite a few code comments and commit message changes
- mvpp2: fix interpretation of max_context_id (I'll take care of
the net -> net-next merge as needed)
- filter by ifindex in the selftest
v2: https://lore.kernel.org/20240803042624.970352-1-kuba@kernel.org
- fix bugs and build in mvpp2
v1: https://lore.kernel.org/20240802001801.565176-1-kuba@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a test for dumping RSS contexts. Make sure indir table
and key are sane when contexts are created with various
combination of inputs. Test the dump filtering by ifname
and start-context.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Indirection table is dumped as a raw u32 array, decode it.
It's tempting to decode hash key, too, but it is an actual
bitstream, so leave it be for now.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Applications may want to deal with dynamic RSS contexts only.
So dumping context 0 will be counter-productive for them.
Support starting the dump from a given context ID.
Alternative would be to implement a dump flag to skip just
context 0, not sure which is better...
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we track RSS contexts in the core we can easily dump
them. This is a major introspection improvement, as previously
the only way to find all contexts would be to try all ids
(of which there may be 2^32 - 1).
Don't use the XArray iterators (like xa_for_each_start()) as they
do not move the index past the end of the array once done, which
caused multiple bugs in Netlink dumps in the past.
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IOCTL already uses the XArray when reporting info about additional
contexts. Do the same thing in netlink code.
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Factor calling device ops out of rss_prepare_data().
Next patch will add alternative path using xarray.
No functional changes.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
marvell/otx2 and mvpp2 do not support setting different
keys for different RSS contexts. Contexts have separate
indirection tables but key is shared with all other contexts.
This is likely fine, indirection table is the most important
piece.
Don't report the key-related parameters from such drivers.
This prevents driver-errors, e.g. otx2 always writes
the main key, even when user asks to change per-context key.
The second reason is that without this change tracking
the keys by the core gets complicated. Even if the driver
correctly reject setting key with rss_context != 0,
change of the main key would have to be reflected in
the XArray for all additional contexts.
Since the additional contexts don't have their own keys
not including the attributes (in Netlink speak) seems
intuitive. ethtool CLI seems to deal with it just fine.
Having to set the flag in majority of the drivers is
a bit tedious but not reporting the key is a safer
default.
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove .cap_rss_ctx_supported from drivers which moved to the new API.
This makes it easy to grep for drivers which still need to be converted.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cap_rss_ctx_supported was created because the API for creating
and configuring additional contexts is mux'ed with the normal
RSS API. Presence of ops does not imply driver can actually
support rss_context != 0 (in fact drivers mostly ignore that
field). cap_rss_ctx_supported lets core check that the driver
is context-aware before calling it.
Now that we have .create_rxfh_context, there is no such
ambiguity. We can depend on presence of the op.
Make setting the bit optional.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 24ac7e544081 ("ethtool: use the rss context XArray
in ring deactivation safety-check") core will prevent queues from
being disabled while being used by additional RSS contexts.
The safety check is no longer necessary, and core will do a more
accurate job of only rejecting changes which can actually break
things.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement the separate create/modify/delete ops for RSS.
No problems with IDs - even tho RSS tables are per device
the driver already seems to allocate IDs linearly per port.
There's a translation table from per-port context ID
to device context ID.
mvpp2 doesn't have a key for the hash, it defaults to
an empty/previous indir table.
Note that there is no key at all, so we don't have to be
concerned with reporting the wrong one (which is addressed
by a patch later in the series).
Compile-tested only.
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include the "name" of the context in the comment for traffic
checks. Makes it easier to reason about which context failed
when we loop over 32 contexts (it may matter if we failed in
first vs last, for example).
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variable "did_rsc" is initialized twice, which is unnecessary. Just
remove one of them.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simpler and allows avoiding manual pointer addition.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to respect the 80 columns limit, split the half-duplex
monitoring function in two.
This is just a styling change, no functional change.
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Russell King says:
====================
net: phylib: fix fixed-speed >= 1G
This is v2 of the patch (now patches) adding support for ethtool
!autoneg while respecting the requirements of IEEE 802.3.
v2 fixes the build errors in the previous patch by first constifying
the "advertisement" argument to the linkmode functions that only
read from this pointer. It also fixes the incorrectly named
linkmode_set function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have an increasing number of drivers that are forcing
auto-negotiation to be enabled for speeds of 1G or faster.
It would appear that auto-negotiation is mandatory for speeds above
100M. In 802.3, Annex 40C's state diagrams seems to imply that
mr_autoneg_enable (BMCR AN ENABLE) doesn't affect whether or not the
AN state machines work for 1000base-T, and some PHY datasheets (e.g.
Marvell Alaska) state that disabling mr_autoneg_enable leaves AN
enabled but forced to 1G full duplex.
Other PHY datasheets imply that BMCR AN ENABLE should not be cleared
for >= 1G.
Thus, this should be handled in phylib rather than in each driver.
Rather than erroring out, arrange to implement the Marvell Alaska
solution but in software for all PHYs: generate an appropriate
single-speed advertisement for the requested speed, and keep AN
enabled to the PHY driver. However, to avoid userspace API breakage,
continue to report to userspace that we have AN disabled.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Constify the advertising mask to linkmode functions that only read from
the advertising mask.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Javier Carrasco says:
====================
net: mvpp2: rework child node/port removal handling
These two patches used to be part of another series [1] that did not
apply to the networking tree without conflicts. This is therefore just a
partial resend with no code modifications, just rebased onto net/main.
Link: https://lore.kernel.org/all/20240806181026.5fe7f777@kernel.org/ [1]
====================
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The iterated nodes are direct children of the device node, and the
`device_for_each_child_node()` macro accounts for child node
availability.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
The child nodes within mvpp2_probe are not accessed outside the loops,
and the scoped version of the macro can be used to automatically
decrement the refcount on early exits.
Use `device_for_each_child_node()` and its scoped variant to indicate
device's direct child nodes.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As discussed in [1], there is no need to iterate over child nodes to
remove the list of ports. Instead, a loop up to `port_count` ports can
be used, and is in fact more reliable in case the child node
availability changes.
The suggested approach removes the need for the `fwnode` and
`port_fwnode` variables in mvpp2_remove() as well.
Link: https://lore.kernel.org/all/ZqdRgDkK1PzoI2Pf@shell.armlinux.org.uk/ [1]
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
David Wei says:
====================
fix bnxt_en queue reset when queue is active
The current bnxt_en queue API implementation is buggy when resetting a
queue that has active traffic. The problem is that there is no FW
involved to stop the flow of packets and relying on napi_disable() isn't
enough.
To fix this, call bnxt_hwrm_vnic_update() with MRU set to 0 for both the
default and the ntuple vnic to stop the flow of packets. This works for
any Rx queue and not only those that have ntuple rules since every Rx
queue is either in the default or the ntuple vnic.
For bnxt_hwrm_vnic_update() to work, proper flushing must be done by the
FW. A FW flag is there to indicate support and queue_mgmt_ops is keyed
behind this.
The first three patches are from Michael Chan and adds the prerequisite
vnic functions and FW flags indicating that it will properly flush
during vnic update.
Tested on BCM957504 while iperf3 is active:
1. Reset a queue that has an ntuple rule steering flow into it
2. Reset all queues in order, one at a time
In both cases the flow is not interrupted.
Sending this to net-next as there is no in-tree kernel consumer of queue
API just yet, and there is a patch that changes when the queue_mgmt_ops
is registered.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
---
v3:
- include patches from Michael Chan that adds a FW flag for vnic flush
capability
- key support for queue_mgmt_ops behind this new flag
v2:
- split setting vnic->mru into a separate patch (Wojciech)
- clarify why napi_enable()/disable() is removed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The queue API calls bnxt_hwrm_vnic_update() to stop/start the flow of
packets, which can only properly flush the pipeline if FW indicates
support.
Add a macro BNXT_SUPPORTS_QUEUE_API that checks for the required flags
and only set queue_mgmt_ops if true.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current implementation when resetting a queue while packets are
flowing puts the queue into an inconsistent state.
There needs to be some synchronisation with the FW. Add calls to
bnxt_hwrm_vnic_update() to set the MRU for both the default and ntuple
vnic during queue start/stop. When the MRU is set to 0, flow is stopped.
Each Rx queue belongs to either the default or the ntuple vnic.
With calling bnxt_hwrm_vnic_update() the calls to napi_enable() and
napi_disable() must be removed for reset to work on a queue that has
active traffic flowing e.g. iperf3.
Co-developed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set the newly added vnic->mru field in bnxt_hwrm_vnic_cfg().
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check the HWRM_VNIC_QCAPS FW response for the receive engine flush
capability. This capability indicates that we can reliably support
RX ring restart when calling HWRM_VNIC_UPDATE with MRU set to 0.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the function bnxt_hwrm_vnic_update() to call FW to update
a VNIC. This call can be used when disabling and enabling a
receive ring within a VNIC. The mru which is the maximum receive
size of packets received by the VNIC can be updated.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The main changes are:
1. HWRM_VNIC_UPDATE used to safely disable and enable an RX ring within
the VNIC.
2. New flag in HWRM_VNIC_QCAPS to indicate FW will do the proper flush
during HWRM_VNIC_UPDATE.
3. New flag in HWRM_FUNC_QCAPS to indicate that reservations for some
resources such as VNIC can be reduced.
4. New backing store memory types not used by the driver yet.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
James Chapman says:
====================
l2tp: misc improvements
This series makes several improvements to l2tp:
* update documentation to be consistent with recent l2tp changes.
* move l2tp_ip socket tables to per-net data.
* fix handling of hash key collisions in l2tp_v3_session_get
* implement and use get-next APIs for management and procfs/debugfs.
* improve l2tp refcount helpers.
* use per-cpu dev->tstats in l2tpeth devices.
* fix a lockdep splat.
* fix a race between l2tp_pre_exit_net and pppol2tp_release.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot exposes a race where a net used by l2tp is removed while an
existing pppol2tp socket is closed. In l2tp_pre_exit_net, l2tp queues
TUNNEL_DELETE work items to close each tunnel in the net. When these
are run, new SESSION_DELETE work items are queued to delete each
session in the tunnel. This all happens in drain_workqueue. However,
drain_workqueue allows only new work items if they are queued by other
work items which are already in the queue. If pppol2tp_release runs
after drain_workqueue has started, it may queue a SESSION_DELETE work
item, which results in the warning below in drain_workqueue.
Address this by flushing the workqueue before drain_workqueue such
that all queued TUNNEL_DELETE work items run before drain_workqueue is
started. This will queue SESSION_DELETE work items for each session in
the tunnel, hence pppol2tp_release or other API requests won't queue
SESSION_DELETE requests once drain_workqueue is started.
WARNING: CPU: 1 PID: 5467 at kernel/workqueue.c:2259 __queue_work+0xcd3/0xf50 kernel/workqueue.c:2258
Modules linked in:
CPU: 1 UID: 0 PID: 5467 Comm: syz.3.43 Not tainted 6.11.0-rc1-syzkaller-00247-g3608d6aca5e7 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
RIP: 0010:__queue_work+0xcd3/0xf50 kernel/workqueue.c:2258
Code: ff e8 11 84 36 00 90 0f 0b 90 e9 1e fd ff ff e8 03 84 36 00 eb 13 e8 fc 83 36 00 eb 0c e8 f5 83 36 00 eb 05 e8 ee 83 36 00 90 <0f> 0b 90 48 83 c4 60 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc
RSP: 0018:ffffc90004607b48 EFLAGS: 00010093
RAX: ffffffff815ce274 RBX: ffff8880661fda00 RCX: ffff8880661fda00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffff815cd6d4 R09: 0000000000000000
R10: ffffc90004607c20 R11: fffff520008c0f85 R12: ffff88802ac33800
R13: ffff88802ac339c0 R14: dffffc0000000000 R15: 0000000000000008
FS: 00005555713eb500(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000001eda6000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
queue_work_on+0x1c2/0x380 kernel/workqueue.c:2392
pppol2tp_release+0x163/0x230 net/l2tp/l2tp_ppp.c:445
__sock_release net/socket.c:659 [inline]
sock_close+0xbc/0x240 net/socket.c:1421
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:228
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x168/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f061e9779f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffff1c1fce8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 000000000001017d RCX: 00007f061e9779f9
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007ffff1c1fdc0 R08: 0000000000000001 R09: 00007ffff1c1ffcf
R10: 00007f061e800000 R11: 0000000000000246 R12: 0000000000000032
R13: 00007ffff1c1fde0 R14: 00007ffff1c1fe00 R15: ffffffffffffffff
</TASK>
Fixes: fc7ec7f554d7 ("l2tp: delete sessions using work queue")
Reported-by: syzbot+0e85b10481d2f5478053@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0e85b10481d2f5478053
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
l2tp_eth uses old-style dev->stats for fastpath packet/byte
counters. Convert it to use dev->tstats per-cpu counters.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
l2tp_tunnel_inc_refcount and l2tp_session_inc_refcount wrap
refcount_inc. They add no value so just use the refcount APIs directly
and drop l2tp's helpers. l2tp already uses refcount_inc_not_zero
anyway.
Rename l2tp_tunnel_dec_refcount and l2tp_session_dec_refcount to
l2tp_tunnel_put and l2tp_session_put to better match their use pairing
various _get getters.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
l2tp netlink and procfs/debugfs iterate over tunnel and session lists
to obtain data. They currently use very inefficient get_nth functions
to do so. Replace these with get_next.
For netlink, use nl cb->ctx[] for passing state instead of the
obsolete cb->args[].
l2tp_tunnel_get_nth and l2tp_session_get_nth are no longer used so
they can be removed.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
l2tp management APIs and procfs/debugfs iterate over l2tp tunnel and
session lists. Since these lists are now implemented using IDR, we can
use IDR get_next APIs to iterate them. Add tunnel/session get_next
functions to do so.
The session get_next functions get the next session in a given tunnel
and need to account for l2tpv2 and l2tpv3 differences:
* l2tpv2 sessions are keyed by tunnel ID / session ID. Iteration for
a given tunnel ID, TID, can therefore start with a key given by
TID/0 and finish when the next entry's tunnel ID is not TID. This
is possible only because the tunnel ID part of the key is the upper
16 bits and the session ID part the lower 16 bits; when idr_next
increments the key value, it therefore finds the next sessions of
the current tunnel before those of the next tunnel. Entries with
session ID 0 are always skipped because they are used internally by
pppol2tp.
* l2tpv3 sessions are keyed by session ID. Iteration starts at the
first IDR entry and skips entries where the tunnel does not
match. Iteration must also consider session ID collisions and walk
the list of colliding sessions (if any) for one which matches the
supplied tunnel.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To handle colliding l2tpv3 session IDs, l2tp_v3_session_get searches a
hashed list keyed by ID and sk. Although unlikely, if hash keys
collide, it is possible that hash_for_each_possible loops over a
session which doesn't have the ID that we are searching for. So check
for session ID match when looping over possible hash key matches.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
