| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.7:
- Add audio DT nodes for p200/p201/u200
- Add a bunch of peripherals for Amlogic-T7 (watchdog, power domain, pinctrl)
- Add a bunch or peripherals for Amlogic-A1 (clk, usb, efuse, spi, uarts, emmc, ADC, rng, i2c)
- Add NAND node on Amlogic AXG
- Again a bunch of DT fixups for DT bindings check
- New boards:
- Amlogic AD402 reference board based on A113L SoC
- Libre Computer Cottonwood boards
* tag 'amlogic-arm64-dt-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (38 commits)
arm64: dts: amlogic: a1: support all i2c masters and their muxes
arm64: dts: amlogic: add libretech cottonwood support
dt-bindings: arm: amlogic: add libretech cottonwood support
arm64: dts: meson-a1-ad402: set SPIFC pins
arm64: dts: meson: a1: Add SPIFC mux pins
arm64: dts: meson-s4: add hwrng node
arm64: dts: meson: g12: name spdifout consistently
arm64: dts: Add pinctrl node for Amlogic T7 SoCs
arm64: dts: meson: u200: add onboard devices
arm64: dts: meson: u200: use TDM C for HDMI
arm64: dts: meson: u200: add spdifout b routes
arm64: dts: meson: u200: add missing audio clock controller
arm64: dts: meson: u200: fix spdif output pin
arm64: dts: amlogic: t7: add power domain controller node
dt-bindings: power: add Amlogic T7 power domains
arm64: dts: meson-g12: Fix compatible for amlogic,g12a-tdmin
arm64: dts: meson-g12: Fix clock order for amlogic,axg-tdm-iface devices
arm64: dts: amlogic: meson-axg: Meson NAND node
dt-bindings: arm: amlogic: add Amlogic AD402 bindings
arm64: dts: introduce Amlogic AD402 reference board based on A113L SoC
...
Link: https://lore.kernel.org/r/b3e1bf66-9182-4d48-88ef-7efc20466e7c@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.7
- New machine:
* Facebook's Minevra, as Chassis Management Controller using the
AST2600
- Updates to Ampere's Mt Mitchell and Mt Jade systems, and IBM's
Bonnell
* tag 'aspeed-6.7-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: mtmitchell: Add I2C NVMe alias port
ARM: dts: aspeed: mtmitchell: Remove redundant ADC configurations
ARM: dts: aspeed: mtmitchell: Add inlet temperature sensor
ARM: dts: aspeed: mtjade: Add the gpio-hog
ARM: dts: aspeed: mtjade, mtmitchell: Add new gpio-line-names
ARM: dts: aspeed: mtjade, mtmitchell: Update gpio-line-names
ARM: dts: aspeed: Minerva: Add Facebook Minerva CMC board
dt-bindings: arm: aspeed: document board compatibles
ARM: dts: aspeed: bonnell: Add reserved memory for TPM event log
Link: https://lore.kernel.org/r/CACPK8XebMAQvgQTRH+KoaTFg7CzRkS79Fz3Kn8p4mbaezWGkUQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM DeviceTree updates for v6.7
RPM master stats is introduced for MSM8226 and MSM8974. The PCIe PHY of
SDX55 is transitioned to the new binding. The hall sensor on the Samsung
Galaxy Tab 4 is inverted.
A number of fixes reported from DeviceTree validation are fixed.
* tag 'qcom-dts-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: ipq8064: move keys and leds out of soc node
ARM: dts: qcom: mdm9615: populate vsdcc fixed regulator
ARM: dts: qcom: apq8060: drop incorrect regulator-type
ARM: dts: qcom: apq8064: drop incorrect regulator-type
ARM: dts: qcom: sdx65: fix SDHCI clocks order
ARM: dts: qcom: apq8064: drop label property from DSI
ARM: qcom: msm8974: Add rpm-master-stats node
ARM: qcom: msm8226: Add rpm-master-stats node
ARM: dts: qcom: apq8026-samsung-matisse-wifi: Fix inverted hall sensor
ARM: dts: qcom: drop incorrect cell-index from SPMI
ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings
Link: https://lore.kernel.org/r/20231015204558.855987-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.7
The SM7125 platform is introduced, with support for Xiaomi Redmi Note 9
Pro. Support for Fairphone 5, on QCM6490, and BQ Aquaris M5, on MSM8939,
are introduced.
With the various QMP PHY bindings having been refactored, SC7180,
SC7280, SDM845, SM8150, and SM8250 are transitioned to the new USB/DP
combo PHY binding. IPQ6018, IPQ8074 MSM8998, SC7280, SC8180X, SDM845,
SM8150, SM8250, and SM8450 are transitioned to the new PCIe PHY binding,
and SC8180X is transitioned to the new UFS phy binding.
The UFS power supply situation is clarified, and a range of boards
across MSM8996, MSM8998, SM4250, SM6115, SM6125, SM8350, SM8450, and
SM8550 receives corrections for this.
On IPQ5018 watchdog support is introduced, and the SCM driver has SDI
(debug image) enabled - so that it can be disabled. On IPQ5332 USB is
enabled. The hwspinlock identifier is corrected across IPQ5332, IPQ6018,
IPQ8074 and IPQ9574.
The reserved-memory ranges for the remoteprocs on MSM8916 boards are
refactored, to reduce the amount of duplicated boilerplate definitions.
A number of nodes are transitioned to be disabled by default, to
facilitate new boards.
Samsung Galaxy Tab A 8.0 and Samsung Galaxy Tab A 9.7 gains display
support, and the latter capacitive keys. Samsung Galaxy J5 gains
accelerometer support. The Dragonboard 410c gains missing ADC7533
regulator definition, and an overlay forcing the board to operate in
host mode, for automation purposes.
On MSM8976, the outgoing IPC bits for modem and wcss are corrected, and
reserved-memory regions are updated.
Incorrect reserved-memory regions are also corrected for MSM8992 and
MSM8994 devices.
The QRB2210 RB1 board gets debug UART moved per hardware update.
regulator voltage ranges are corrected, remoteprocs are enabled, USB
SuperSpeed PHY is enabled, and GPIO LEDs are introduced for Bluetooth,
WiFi and a user LED.
Interrupts are described for the SGMII PHYs on SA8775P Ride platform,
and the inline crypto engine is introduced for UFS.
On SC7180 the audio DSP remoteproc is introduced. Additional SKUs of the
Lazor boards are added.The RT5682 audio codec part is reorganized to be
easier to maintain. On Trogdor devices, the touchscreen and display
panels are linked to improve the power cycling behavior across the two.
On SC7280 the cpuidle states are rewritten to support OS-initiated PCSI
mode. LMH interrupts are added, to receive feedback when throttling
occurs. The embedded usb debugger (EUD) description and the dummy
usb-c-connector node is removed, as this is not correctly described. The
USB3 pipe clock input of the global clock controller is properly
described.
Modem remoteproc is introduced on SDM630, and the SDM670 PDC mapping is
corrected.
On the SDM845 MTP PCIe support is introduced. The volumn down and reset
buttons are defined. Remoteproc firmware names and the WiFI
configuration is corrected.
On Sony Xperia XZ2, XZ2 Compact, and XZ3 GPIO lines names are provided
for TLMM and PMICs. The camera regulators are also added.
Display hardware blocks are added to SM6125, and enabled on Sony Xperia
10 II.
The ref clock is wired up to PCIe PHY on SM8150.
On SM8250/QRB5165, and the RB5 board, the DisplayPort controller and the
TCPM is introduced, with all the plumbing to get USB role and
orientation switching, as well as DisplayPort altmode to work.
Interconnects and power-domains are also described for the QUPs on this
platform.
Previously ignored PMICs are described for the SM8350 Hardware
Development Kit (HDK), and PMR735a regulators are introduced. The
pinctrl state for uart18 is corrected.
On SM8450 HDK audio routes are corrected, to enable the analog
microphones on the board. The addition of the PRNG is reverted, in favor
of an upcoming additon of a true RNG.
Constants are replaced with QCOM_SCM_VMID_* defines on a variety of
boards.
The SM8550 QRD board gets Bluetooth support, and the camera clock
controller is described.
Additionally, a number of fixes are introduced in a variety of platforms
and boards, to align with Devicetree bindings.
* tag 'qcom-arm64-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (148 commits)
arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulators
ARM: dts: qcom: sdx65-mtp: Specify PM7250B SID to use
arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode
arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5
dt-bindings: arm: qcom: Add QCM6490 Fairphone 5
arm64: dts: qcom: pm8350c: Add flash led node
arm64: dts: qcom: pm7250b: make SID configurable
arm64: dts: qcom: sc7280: Mark some nodes as 'reserved'
arm64: dts: qcom: msm8939: Fix iommu local address range
arm64: dts: qcom: ipq5018: indicate that SDI should be disabled
arm64: dts: qcom: msm8976: Fix ipc bit shifts
arm64: dts: qcom: msm8976: Split lpass region
arm64: dts: qcom: pm8150l: Add wled node
arm64: dts: qcom: sa8775p: enable the inline crypto engine
arm64: dts: qcom: msm8916/39: Fix venus memory size
arm64: dts: qcom: msm8916/39: Move mpss_mem size to boards
arm64: dts: qcom: msm8916/39: Disable unneeded firmware reservations
arm64: dts: qcom: msm8939: Reserve firmware memory dynamically
arm64: dts: qcom: msm8916: Reserve MBA memory dynamically
arm64: dts: qcom: msm8916: Reserve firmware memory dynamically
...
Link: https://lore.kernel.org/r/20231015191107.854658-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.7
- New board support: TQ-Systems LS1043A/LS1046A and LS1088 based boards,
VAR-SOM-MX6 SoM, SolidRun LX2162A SoM & Clearfog, and phyGATE-Tauri
i.MX 8M Mini board.
- A set of changes from Adam Ford adding audio related devices for i.MX8M
SoCs, migrating sound card to simple-audio-card for imx8mm-beacon board,
and adding DMIC support i.MX8M Beacon boards.
- A series from Alexander Stein to add LVDS overlay support for i.MX8M
based MBA8Mx boards.
- A couple of changes from Cem Tenruh to add gpio-line-names for i.MX8MP
based phycore boards.
- A bunch of dt-schema check fixes from Fabio Estevam.
- A few changes from Frank Li to add edma devices and enable UART
support for i.MX93 and i.MX8 SoCs and related boards.
- A series from Marek Vasut to improve various aspects of i.MX8MP based
DHCOM boards support.
- A series from Teresa Remmet to enable Flexcan, USB and RS232/RS485
support for imx8mp-phyboard-pollux board.
- A number of changes from Tim Harvey to add imx219 overlay and TPM
device support for Gateworks boards.
- Other small and random changes.
* tag 'imx-dt64-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (101 commits)
arm64: dts: imx8mp: Drop i.MX8MP DHCOM rev.100 PHY address workaround from PDK3 DT
arm64: dts: imx8mp: Update i.MX8MP DHCOM SoM DT to production rev.200
arm64: dts: imx8mp: Add UART1 and RTC wake up source on DH i.MX8M Plus DHCOM SoM
arm64: dts: imx8mp: Switch WiFI enable signal to mmc-pwrseq-simple on i.MX8MP DHCOM SoM
arm64: dts: imx8mp: Fix property indent on DH i.MX8M Plus DHCOM PDK3
arm64: dts: imx8mp: Describe VDD_ARM run and standby voltage for DH i.MX8M Plus DHCOM SoM
arm64: dts: imx8mp: Describe VDD_ARM run and standby voltage for Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp-beacon: Add DMIC support
arm64: dts: imx8mn-beacon: Add DMIC support
arm64: dts: imx8mm-beacon: Add DMIC support
arm64: dts: imx8mm-beacon: Migrate sound card to simple-audio-card
arm64: dts: imx8mn-evk: Remove codec clocks/clock-names
arm64: dts: imx8mp-beacon: Configure 100MHz PCIe Ref Clk
arm64: dts: imx8mn: Add sound-dai-cells to micfil node
arm64: dts: imx8mm: Add sound-dai-cells to micfil node
arm64: dts: freescale: add initial device tree for TQMLS1088A
arm64: dts: freescale: add initial device tree for TQMLS1043A/TQMLS1046A
arm64: dts: ls1043a: remove second dspi node
arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board
arm64: dts: lx2160a: describe the SerDes block #2
...
Link: https://lore.kernel.org/r/20231015132300.2268016-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.7:
- New board support: Variscite VAR-SOM-MX6 SoM and Custom board.
- A bunch of dt-schema check fixes from Fabio Estevam.
- A couple of MBA6ULX changes from Alexander Stein that marks gpio-buttons
as wakeup-source and improves gpio-keys button node names.
- Add ATM0700D4 panel support for sk-imx53 board.
- Correct regulator node name for imx6qdl-nitrogen6 board.
- A couple of Gateworks i.MX6QDL board update: adding MDIO nodes and
populating Ethernet MAC address.
* tag 'imx-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
ARM: dts: imx7d-pico-pi: Disable USDHC1
ARM: dts: imx28: Fix dcp compatible
ARM: dts: imx7s: Remove #power-domain-cells from gpcv2
ARM: dts: imx25: Remove clock-names from the watchdog
ARM: dts: imx25: Fix sram node
ARM: dts: imx25: Fix dryice node
ARM: dts: imx6qdl-gw5904: add dt props for populating eth MAC addrs
ARM: dts: vfxxx: Write dmas in a single line
ARM: dts: imx27-phytec: Use eeprom as the node name
ARM: dts: imx51: Remove invalid sahara compatible
ARM: dts: imx53: Adjust the ecspi compatible
ARM: dts: imx7ulp: Fix usbphy1 compatible
ARM: dts: imx6q-pistachio: Use a valid value for fsl,tx-d-cal
ARM: dts: imx6q-b650v3: Fix fsl,tx-cal-45-dn-ohms
ARM: dts: imx28-tx28: Move phy_type to USB node
ARM: dts: mxs: Switch to #pwm-cells = <3>
ARM: dts: imx6q: Add Variscite MX6 Custom board support
ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6 SoM support
ARM: dts: mxs: Fix duart clock-names
ARM: dts: imx6ull/7d-colibri: Fix compatible
...
Link: https://lore.kernel.org/r/20231015132300.2268016-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings for 6.7:
- Compatibles for new boards: TQ-Systems LS1043A/LS1046A and LS1088
based boards, VAR-SOM-MX6 SoM, SolidRun LX2162A SoM & Clearfog,
and phyGATE-Tauri-L board.
- Add missing i.MX23 based board compatibles.
* tag 'imx-bindings-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add TQ-Systems LS1088 based boards
dt-bindings: arm: fsl: Add TQ-Systems LS1043A/LS1046A based boards
dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog Board
dt-bindings: arm: fsl: add phyGATE-Tauri-L board
dt-bindings: arm: fsl: Document the missing imx23 boards
dt-bindings: arm: fsl: Add VAR-SOM-MX6 SoM with Custom Board
Link: https://lore.kernel.org/r/20231015132300.2268016-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.6-final
A single fix for the Starfive VisionFive 2 platform so that chip select
for SPI matches the vendor documentation.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.6-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: visionfive 2: correct spi's ss pin
riscv: dts: starfive: visionfive 2: Fix uart0 pins sort order
riscv: dts: starfive: visionfive 2: Enable usb0
riscv: dts: starfive: fix NOR flash reserved-data partition size
Link: https://lore.kernel.org/r/20231015-outmatch-tragedy-228f91d396b5@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- Added V3s nodes for PWM pinctrl, EHCI and OHCI
- RISC-V DT cleanups
- Added new ISA property and PMU node to Allwinner D1
- Added interconnect to R40 video codec node
- New boards: Anbernic RG-Nano, BigTreeTech Pi, BigTreeTech CB1 SOM
* tag 'sunxi-dt-for-6.7-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: convert isa detection to new properties
ARM: dts: sun8i-r40: Add interconnect to video-codec
ARM: dts: sunxi: add support for Anbernic RG-Nano
dt-bindings: arm: sunxi: add Anbernic RG-Nano
ARM: dts: sun8i: v3s: add EHCI and OHCI to v3s dts
arm: dts: sun8i: V3s: Add pinctrl for pwm
riscv: dts: allwinner: d1: Add PMU event node
arm64: dts: allwinner: h616: Add BigTreeTech Pi support
arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards support
dt-bindings: arm: sunxi: Add BigTreeTech boards
dt-bindings: vendor-prefixes: Add BigTreeTech
arm64: dts: allwinner: h616: Add SID controller node
dt-bindings: nvmem: SID: Add binding for H616 SID controller
riscv: dts: allwinner: remove address-cells from intc node
riscv: dts: use capital "OR" for multiple licenses in SPDX
Link: https://lore.kernel.org/r/20231013194203.GA2155816@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.7-rc1
This contains some fixes for Tegra234 boards as well as some cleanups
that will help with json-schema validation.
For older devices, there's now support for display on Smaug (a.k.a.
Pixel C) and the IOMMU for host1x is enabled on Tegra132, which should
help with large memory allocations for display and multimedia.
* tag 'tegra-for-6.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Use correct interrupts for Tegra234 TKE
arm64: tegra: Add power-sensors for Tegra234 boards
arm64: tegra: Mark Tegra234 SPI as compatible with Tegra114
arm64: tegra: Add dmas and dma-names for Tegra234 UARTE
arm64: tegra: Use correct format for clocks property
arm64: tegra: Remove duplicate nodes on Jetson Orin NX
arm64: tegra: Add missing current-speed for SBSA UART
arm64: tegra: Add display panel node on Smaug
arm64: tegra: Add backlight node on Smaug
arm64: tegra: Add DSI/CSI regulator on Smaug
arm64: tegra: Enable IOMMU for host1x on Tegra132
arm64: tegra: Fix P3767 QSPI speed
arm64: tegra: Fix P3767 card detect polarity
Link: https://lore.kernel.org/r/20231013153723.1729109-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.7-rc1
Contains a small fix that drops an unnecessary unit-address.
* tag 'tegra-for-6.7-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Drop unit-address from parallel RGB output port
Link: https://lore.kernel.org/r/20231013153723.1729109-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.7-rc1
This contains some rework of the Tegra PMC device tree bindings that
will help with validating device trees with json-schema.
* tag 'tegra-for-6.7-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: pmc: Relicense and move into soc/tegra directory
dt-bindings: arm: tegra: pmc: Reformat example
dt-bindings: arm: tegra: pmc: Restructure pad configuration node schema
dt-bindings: arm: tegra: pmc: Increase maximum number of clocks per powergate
dt-bindings: arm: tegra: pmc: Move additionalProperties
dt-bindings: arm: tegra: pmc: Remove useless boilerplate descriptions
dt-bindings: arm: tegra: pmc: Improve property descriptions
Link: https://lore.kernel.org/r/20231013153723.1729109-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.7 (take two)
- Improve audio clock accuracy on the RZ/{G2L,G2LC,V2L} SMARC EVK
development boards,
- Add FLASH support for the Renesas Bock-W development board,
- Add L2 cache and non-coherent DMA support on the RZ/Five SoC and the
RZ/Five SMARC development board,
- Add initial support for the RZ/G3S SoC and the RZ/G3S SMARC SoM and
SMARC Carrier-II EVK development boards,
- Add initial support for the R8A779F4 variant of the R-Car S4-8 SoC
and the R-Car S4 Starter Kit development board,
- Apply DT overlays to base DTBs to improve validation and usability.
* tag 'renesas-dts-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (25 commits)
arm64: dts: renesas: Apply overlays to base dtbs
arm64: dts: renesas: rzg3s-smarc-som: Spelling s/device-type/device_type/
arm64: dts: renesas: r9a08g045: Add missing cache-level for L3 cache
arm64: dts: renesas: r9a08g045: Add nodes for SDHI1 and SDHI2
arm64: dts: renesas: ebisu: Document Ebisu-4D support
arm64: dts: renesas: Add R-Car S4 Starter Kit support
arm64: dts: renesas: Add Renesas R8A779F4 SoC support
arm64: dts: renesas: Add initial device tree for RZ/G3S SMARC EVK board
arm64: dts: renesas: Add initial device tree for RZ SMARC Carrier-II Board
arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoM
arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC
riscv: dts: renesas: rzfive-smarc: Enable the blocks which were explicitly disabled
riscv: dts: renesas: r9a07g043f: Add dma-noncoherent property
riscv: dts: renesas: r9a07g043f: Add L2 cache node
ARM: dts: renesas: bockw: Add FLASH node
arm64: dts: renesas: rz-smarc: Use versa3 clk for audio mclk
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: tegra: fix error return case for recalc_rate
clk: si521xx: Fix regmap write accessor
clk: si521xx: Use REGCACHE_FLAT instead of NONE
...
Link: https://lore.kernel.org/r/cover.1697200123.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.7 (take two)
- Document support for the Renesas RZ/G3S SMARC SoM and SMARC
Carrier-II EVK development boards,
- Document support for the Renesas R-Car S4 Starter Kit.
* tag 'renesas-dt-bindings-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document R-Car S4 Starter Kit
dt-bindings: soc: renesas: Document SMARC Carrier-II EVK
dt-bindings: soc: renesas: Document RZ/G3S SMARC SoM
Link: https://lore.kernel.org/r/cover.1697200121.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt
STi DT for v6.7, round 1 :
stih418-b2264: leds and serial fixes
stih407: drop max-duty-cycle property
stih415/416: remove boards from yaml
stih407/410/418: add boards to yaml
* tag 'sti-dt-for-v6.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
dt-bindings: arm: sti: add STi boards and remove stih415/stih416
dt-bindings: soc: sti: add STi platform syscon
ARM: dts: st: correct led level in stih418-b2264.dts
ARM: dts: st: move leds out of soc in stih418-b2264.dts
ARM: dts: st: correct serial alias in stih418-b2264.dts
ARM: dts: st: stih407: drop max-duty-cycle
Link: https://lore.kernel.org/r/e6b975f2-9936-465a-8253-6fcead974006@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.7 merge window
Two non-urgent devicetree fixes for am371-evm led pinmux and a node name
warning fix for omap4-epson-embt2ws, and updates for connected devices for
various devices:
- Device updates and enabling of pru support for am335x-pocketbeagle
- Few more devices such as leds and iio for omap4-epson-embt2ws
- Ethernet and led updates for am3517-evm
- Modem sleep pins configuration for motorola-mapphone
* tag 'omap-for-v6.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-embt2ws: Fix pinctrl single node name warning
ARM: dts: motorola-mapphone: Add mdm6600 sleep pins
ARM: dts: am3517: Configure ethernet alias
ARM: dts: am3517-evm: Enable Ethernet PHY Interrupt
ARM: dts: am3517-evm: Fix LED3/4 pinmux
ARM: dts: omap3-gta04: Drop superfluous omap36xx compatible
ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
ARM: dts: omap: omap4-embt2ws: Let IMU driver handle Magnetometer internally
ARM: dts: am335x-pocketbeagle: add missing GPIO mux
ARM: dts: am335x-pocketbeagle: enable pru
ARM: dts: am335x-pocketbeagle: remove dependency cycle
ARM: dts: am335x-pocketbeagle: update LED information
ARM: dts: omap4: embt2ws: add LED
Link: https://lore.kernel.org/r/pull-1697010475-119828@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for 6.7
It contains:
- the new Microchip SAMA5D29 Curiosity board
- a typo fix in TDES node name for SAMA5D4 dtsi
- enablement of RTT as RTC for SAM9X60 Curiosity board
* tag 'at91-dt-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60_curiosity: Add mandatory dt property for RTT
ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity board
dt-bindings: ARM: at91: Document Microchip SAMA5D29 Curiosity
ARM: dts: at91/trivial: fix typo in crypto DT naming
Link: https://lore.kernel.org/r/20231010045955.1259843-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt
Some IXP4xx updates for the v6.7 kernel cycle:
- Provide proper bindings including missing vendor prefixes
for the device trees in use and one more new vendor.
- Add a device tree for USRobotics USR8200 which has two
active users.
- Augment the "reset" GPIO buttons to send KEY_RESTART as
appropriate.
- Enable write on the NSLU2 flash so we get a writeable
rootfs on this device.
* tag 'ixp4xx-for-soc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ixp4xx: Use right restart keycode
ARM: dts: ixp4xx-nslu2: Enable write on flash
ARM: dts: ixp4xx: Add USRobotics USR8200 device tree
ARM: dts: Use only the Linksys compatible for now
dt-bindings: arm: List more IXP4xx devices
dt-bindings: Add vendor prefixes
Link: https://lore.kernel.org/r/CACRpkdZZ6W8uic97S9=Aa+S+s0-0k50TDw1e00u6gFcQfAVDdw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.7
1. Switch all sound cards to generic audio-routing property, supported
since previous release for Samsung drivers. The old
samsung,audio-routing property is deprecated.
2. Correct Exynos4210 thermal by using polling. Apparently interrupts in
Thermal Monitoring Unit are broken.
* tag 'samsung-dt-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4210: enable polling
ARM: dts: samsung: s5pv210-galaxys: switch sound card to audio-routing
ARM: dts: samsung: s5pv210-fascinate4g: switch sound card to audio-routing
ARM: dts: samsung: exynos5422-odroid: switch sound card to audio-routing
ARM: dts: samsung: exynos4412-odroid: switch sound card to audio-routing
ARM: dts: samsung: exynos4412-n710x: switch sound card to audio-routing
ARM: dts: samsung: exynos4412-galaxy-s3: switch sound card to audio-routing
ARM: dts: samsung: exynos4212-tab3: switch sound card to audio-routing
Link: https://lore.kernel.org/r/20231006093943.106002-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert the D1 devicetrees to use the new properties
"riscv,isa-base" & "riscv,isa-extensions".
For compatibility with other projects, "riscv,isa" remains.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231009-moonlight-gray-92debdc89f30@wendy
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Video codec needs interconnect, so driver knows that it needs to adjust
DMA addresses.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20230911171407.1572030-1-jernej.skrabec@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
The shared interrupts 0-9 of the TKE are mapped to interrupts 0-9, but
shared interrupts 10-15 are mapped to 256-261. Correct the mapping for
the final 6 interrupts. This prevents the TKE from requesting the RTC
interrupt (along with several GTE and watchdog interrupts).
Reported-by: Shubhi Garg <shgarg@nvidia.com>
Fixes: 28d860ed02c2 ("arm64: tegra: Enable native timers on Tegra234")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Populate the ina219 and ina3221 power-sensors for the various Tegra234
boards. These sensors are located on the Tegra234 module boards and the
configuration of some sensors is common across the different Tegra234
modules. Therefore, add any common sensor configurations to appropriate
device tree source file so it can be re-used across modules.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add bindings for STi platform boards and remove stih415/stih416
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Add DT schema of STi platform syscon
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
The state of the green led on the stih418-b2264 is currently
inverted. Correct this by fixing the GPIO active state.
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Move the leds node out of the soc section
and correct the following warning:
Warning (simple_bus_reg): /soc/leds: missing or empty reg/ranges property
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Aliases should only contain lowercase, digits or - hence
correct the alias for the serial from ttyAS0 into serial0
as already done for the other boards.
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
"max-duty-cycle" property was removed in the commit f747a1fe7848
("regulator: pwm-regulator: Remove obsoleted property"):
stih418-b2199.dtb: pwm-regulator: Unevaluated properties are not allowed ('max-duty-cycle' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
|
|
Adds the I2C alias ports to each NVMe drive via the
backplane card.
Besides that, it also adds the eeprom and temperature sensor
on the backplane card.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231005035525.19036-8-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Mt.Mitchell DVT and later hardware do not use adc1. It only uses
adc0 with channels 0, 1 and 2. This commit removes redundant ADC
configurations.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231005035525.19036-7-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add the inlet temperature at address 0x48, which is connected
via BMC I2C8.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231005035525.19036-6-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add the GPIOR5 as a gpio-hog with output high so that can
power the OCP card once the BMC booting.
Add the GPIOAC5 as a gpio-hog with output high to notice
the BMC state.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231005035525.19036-4-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add new gpio-line-names from the Mt.Jade and Mt.Mitchell
HW schematic.
Mt.Jade
GPIOB5: presence-cpu0
GPIOF0: ps0-pgood
GPIOF1: ps1-pgood
GPIOG2: host0-shd-ack-n
GPIOH0: uart1-mode1
GPIOH1: uart2-mode1
GPIOH2: uart3-mode1
GPIOH3: uart4-mode1
GPIOH7: i2c6-reset-n
GPIOH3: host0-reboot-ack-n
GPIOM4: s0-i2c9-alert-n
GPIOM5: s1-i2c9-alert-n
GPIOQ6: led-identify
GPIOS0: s0-vr-hot-n
GPIOS1: s1-vr-hot-n
GPIOS5: vr-pmbus-sel-n
GPIOY3: bmc-vga-en-n
GPIOZ3: s0-rtc-lock
GPIOAC2: spi0-program-sel
GPIOAC3: spi0-backup-sel
Mt.Mitchell:
GPIOC3: bmc-debug-mode
GPIOE1: eth-phy-int-n
GPIOH0: jtag-program-sel
GPIOH1: fpga-program-b
GPIOW3: s1-pcp-pgood
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231005035525.19036-3-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Update GPIO line-name to follow naming convention specified at
github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231005035525.19036-2-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add linux device tree entry related to the Minerva Chassis Management
Controller (CMC) specific devices connected to the Aspeed SoC (AST2600).
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20230914125648.3966519-3-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Document the new compatibles used on the Facebook Minerva Chassis
Management Controller (CMC).
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230914125648.3966519-2-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
DT overlays in tree need to be applied to a base DTB to validate they
apply, to run schema checks on them, and to catch any errors at compile
time.
Signed-off-by: Rob Herring <robh@kernel.org>
[geert: Add missing base/overlay combinations]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/44e5c1781b012a38d07a8d2fc68b26b33c3558b6.1696945404.git.geert+renesas@glider.be
|
|
Fix the following DTBS check warnings:
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dt: /: memory@48000000: 'device-type' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/memory.yaml#
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: /: memory@48000000: 'device_type' is a required property
from schema $id: http://devicetree.org/schemas/memory.yaml#
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231010132701.1658737-7-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fix the following DTBS check warnings:
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: cache-controller-0: 'cache-level' is a required property
from schema $id: http://devicetree.org/schemas/cache.yaml#
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: cache-controller-0: 'cache-level' is a required property
from schema $id: http://devicetree.org/schemas/cache.yaml#
arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: cache-controller-0: Unevaluated properties are not allowed ('cache-size', 'cache-unified' were unexpected)
from schema $id: http://devicetree.org/schemas/cache.yaml#
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231010132701.1658737-7-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add DT nodes for SDHI1 and SDHI2 available on RZ/G3S (R9A08G045).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231010132701.1658737-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.7
1. Exynos850: Add support for USB 2.0 (host and device) and enable it on
E850-96 board.
2. Exynos5433: Switch sound card to generic audio-routing property,
supported since previous release for Samsung drivers. The old
samsung,audio-routing property is deprecated.
3. Few cleanups.
* tag 'samsung-dt64-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: remove unused TMU alias
arm64: dts: exynos: Use pinctrl macros for exynos5433-tm2
arm64: dts: exynos: exynos5433-tm2: switch sound card to audio-routing
arm64: dts: exynos: Enable USB support on E850-96 board
arm64: dts: exynos: Enable USB in Exynos850
Link: https://lore.kernel.org/r/20231006093943.106002-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM DTS for v6.7
Few cleanups and improvements: split joined reg entries for Ethernet in
omap3-devkit8000, add missing spaces before '{' (MediaTek, Nuvoton) and
cleanup whitespace around '=' (MediaTek).
* tag 'dt-cleanup-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: nuvoton: add missing space before {
ARM: dts: mediatek: minor whitespace cleanup around '='
ARM: dts: mediatek: add missing space before {
ARM: dts: omap3-devkit8000: correct ethernet reg addresses (split)
Link: https://lore.kernel.org/r/20231006092823.94839-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.7
Few cleanups and improvements: use lowercase hex for unit addresses
(Bitmain), add missing spaces before '{' (APM, MediaTek) and cleanup
whitespace around '=' (MediaTek, Marvell).
* tag 'dt64-cleanup-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: marvell: minor whitespace cleanup around '='
arm64: dts: mediatek: minor whitespace cleanup around '='
arm64: dts: mediatek: add missing space before {
arm64: dts: apm: add missing space before {
arm64: dts: bitmain: lowercase unit addresses
Link: https://lore.kernel.org/r/20231006092823.94839-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.7
- Add PCIe Host and Endpoint support for the R-Car S4-8 SoC and the
Renesas Spider development board,
- Add FLASH support for the Renesas Genmai and RSK+RZA1 development
boards,
- Add multi Component sound support for Renesas ULCB development
boards equipped with the Shimafuji Kingfisher extension,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: ulcb/kf: Use multi Component sound
ARM: dts: renesas: rskrza1: Add FLASH nodes
ARM: dts: renesas: genmai: Add FLASH nodes
ARM: dts: renesas: wheat: Move Ethernet node to LBSC
ARM: dts: renesas: blanche: Move Ethernet node to LBSC
ARM: dts: renesas: marzen: Move Ethernet node to LBSC
ARM: dts: renesas: r8a7792: Add LBSC node
ARM: dts: renesas: r8a7779: Add LBSC node
ARM: dts: renesas: r7s72100: Add BSC node
ARM: dts: renesas: Remove unused LBSC nodes from board DTS
arm64: dts: renesas: r8a779f0: spider: Enable PCIe Host ch0
arm64: dts: renesas: r8a779f0: Add PCIe Host and Endpoint nodes
ARM: dts: renesas: gr-peach: Remove unneeded probe-type property
ARM: dts: renesas: ape6evm: Drop bogus "mtd-rom" compatible value
ARM: dts: renesas: blanche: Fix typo in GP_11_2 pin name
arm64: dts: renesas: Handle ADG bit for sound clk_i
Link: https://lore.kernel.org/r/cover.1695985427.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.7
- Document support for the new RZ/G3S (R9A08G045) SoC variants.
* tag 'renesas-dt-bindings-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: renesas,rzg2l-sysc: Document RZ/G3S SoC
dt-bindings: soc: renesas: Document Renesas RZ/G3S SoC variants
Link: https://lore.kernel.org/r/cover.1695985425.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
PDK3 DT
In case the i.MX8MP DHCOM rev.100 has been populated on the PDK3
carrier board, the on-SoM PHY PHYAD1 signal has been pulled high
by the carrier board and changed the PHY MDIO address from 5 to 7.
This has been fixed on production rev.200 SoM by additional buffer
on the SoM PHYAD/LED signals, remove the workaround.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The current imx8mp-dhcom-som.dtsi describes prototype rev.100 SoM,
update the DT to describe production rev.200 SoM which brings the
following changes:
- Fast SoC GPIOs exposed on the SoM edge connector
- Slow GPIOs like component resets moved to I2C GPIO expander
- ADC upgraded from TLA2024 to ADS1015 with conversion interrupt
- EEPROM size increased from 256 B to 4 kiB
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Turn Console UART1 and dedicated RTC into wake up sources, to make
it possible to wake on UART and RTC alarm.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX8MP DHCOM SoM
The reset-gpio is connected to WL_REG_EN signal of the WiFi MAC, the
mmc-pwrseq-simple driver is better suited to operate this signal as
it is tied to the slot instead of the MAC, and it can enable the MAC
before the brcmfmac driver binds to it. Make use of the MMC power
sequencer.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
