summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-26powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-PSumeet Pawnikar
Add Alder Lake-N and Raptor Lake-P to the list of processor models for which Power Limit4 is supported by the Intel RAPL driver. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26ACPI: CPPC: Do not prevent CPPC from working in the futureRafael J. Wysocki
There is a problem with the current revision checks in is_cppc_supported() that they essentially prevent the CPPC support from working if a new _CPC package format revision being a proper superset of the v3 and only causing _CPC to return a package with more entries (while retaining the types and meaning of the entries defined by the v3) is introduced in the future and used by the platform firmware. In that case, as long as the number of entries in the _CPC return package is at least CPPC_V3_NUM_ENT, it should be perfectly fine to use the v3 support code and disregard the additional package entries added by the new package format revision. For this reason, drop is_cppc_supported() altogether, put the revision checks directly into acpi_cppc_processor_probe() so they are easier to follow and rework them to take the case mentioned above into account. Fixes: 4773e77cdc9b ("ACPI / CPPC: Add support for CPPC v3") Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26ACPI: PM: x86: Print messages regarding LPS0 idle supportRafael J. Wysocki
Because suspend-to-idle is always supported and on x86 it is the only way to suspend the system if S3 is not supported by the platform, the kernel attempts to enter low-power S0 idle in the suspend-to-idle flow regardless of whether or not the ACPI_FADT_LOW_POWER_S0 flag is set in the FADT. However, if that flag is not set, residency counters associated with low-power S0 idle may not count and the platform may refuse to put the EC into a low-power mode, for example. For this reason, print diagnostic messages when the platform should achieve significant energy savings in low-power S0 idle (because the ACPI_FADT_LOW_POWER_S0 flag is set in the FADT) and when suspend-to-idle becomes the default suspend method (because low-power S0 idle should be equally or more efficient than S3, if available). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
2022-07-26PM: QoS: Add check to make sure CPU freq is non-negativeShivnandan Kumar
CPU frequency should never be negative. If some client driver calls freq_qos_update_request with a negative value which will be very high in absolute terms, then frequency QoS sets max CPU freq at fmax as it considers it's absolute value but it will add plist node with negative priority. plist node has priority from INT_MIN (highest) to INT_MAX(lowest). Once priority is set as negative, another client will not be able to reduce CPU frequency. Adding check to make sure CPU freq is non-negative will fix this problem. Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26PM: hibernate: defer device probing when resuming from hibernationTetsuo Handa
syzbot is reporting hung task at misc_open() [1], for there is a race window of AB-BA deadlock which involves probe_count variable. Currently wait_for_device_probe() from snapshot_open() from misc_open() can sleep forever with misc_mtx held if probe_count cannot become 0. When a device is probed by hub_event() work function, probe_count is incremented before the probe function starts, and probe_count is decremented after the probe function completed. There are three cases that can prevent probe_count from dropping to 0. (a) A device being probed stopped responding (i.e. broken/malicious hardware). (b) A process emulating a USB device using /dev/raw-gadget interface stopped responding for some reason. (c) New device probe requests keeps coming in before existing device probe requests complete. The phenomenon syzbot is reporting is (b). A process which is holding system_transition_mutex and misc_mtx is waiting for probe_count to become 0 inside wait_for_device_probe(), but the probe function which is called from hub_event() work function is waiting for the processes which are blocked at mutex_lock(&misc_mtx) to respond via /dev/raw-gadget interface. This patch mitigates (b) by deferring wait_for_device_probe() from snapshot_open() to snapshot_write() and snapshot_ioctl(). Please note that the possibility of (b) remains as long as any thread which is emulating a USB device via /dev/raw-gadget interface can be blocked by uninterruptible blocking operations (e.g. mutex_lock()). Please also note that (a) and (c) are not addressed. Regarding (c), we should change the code to wait for only one device which contains the image for resuming from hibernation. I don't know how to address (a), for use of timeout for wait_for_device_probe() might result in loss of user data in the image. Maybe we should require the userland to wait for the image device before opening /dev/snapshot interface. Link: https://syzkaller.appspot.com/bug?extid=358c9ab4c93da7b7238c [1] Reported-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26ublk_drv: fix double shift bugDan Carpenter
The test/clear_bit() functions take a bit number, but this code is passing as shifted value. It's the equivalent of saying BIT(BIT(0)) instead of just BIT(0). This doesn't affect runtime because numbers are small and it's done consistently. Fixes: fa362045564e ("ublk: simplify ublk_ch_open and ublk_ch_release") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/Yt/2R/+MJf/MSoyl@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-26ice: Add support for PPPoE hardware offloadMarcin Szycik
Add support for creating PPPoE filters in switchdev mode. Add support for parsing PPPoE and PPP-specific tc options: pppoe_sid and ppp_proto. Example filter: tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \ 1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR Changes in iproute2 are required to use the new fields. ICE COMMS DDP package is required to create a filter as it contains PPPoE profiles. Added a warning message when loaded DDP package does not contain required profiles. Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26flow_offload: Introduce flow_match_pppoeWojciech Drewek
Allow to offload PPPoE filters by adding flow_rule_match_pppoe. Drivers can extract PPPoE specific fields from now on. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26gpio: xilinx: add missing blank line after declarationsShubhrajyoti Datta
Add a missing blank line. No functional changes. WARNING: Missing a blank line after declarations 128: FILE: drivers/gpio/gpio-xilinx.c:120: + void __iomem *addr = chip->regs + reg + xgpio_regoffset(chip, bit / 32); + xgpio_set_value32(a, bit, xgpio_readreg(addr)); WARNING: Missing a blank line after declarations 136: FILE: drivers/gpio/gpio-xilinx.c:126: + void __iomem *addr = chip->regs + reg + xgpio_regoffset(chip, bit / 32); + xgpio_writereg(addr, xgpio_get_value32(a, bit)); Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-26net/sched: flower: Add PPPoE filterWojciech Drewek
Add support for PPPoE specific fields for tc-flower. Those fields can be provided only when protocol was set to ETH_P_PPP_SES. Defines, dump, load and set are being done here. Overwrite basic.n_proto only in case of PPP_IP and PPP_IPV6, otherwise leave it as ETH_P_PPP_SES. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26Merge tag 's390-5.19-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fix from Alexander GordeevL - Prevent relatively slow PRNO TRNG random number operation from being called from interrupt context. That could for example cause some network loads to timeout. * tag 's390-5.19-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/archrandom: prevent CPACF trng invocations in interrupt context
2022-07-26flow_dissector: Add PPPoE dissectorsWojciech Drewek
Allow to dissect PPPoE specific fields which are: - session ID (16 bits) - ppp protocol (16 bits) - type (16 bits) - this is PPPoE ethertype, for now only ETH_P_PPP_SES is supported, possible ETH_P_PPP_DISC in the future The goal is to make the following TC command possible: # tc filter add dev ens6f0 ingress prio 1 protocol ppp_ses \ flower \ pppoe_sid 12 \ ppp_proto ip \ action drop Note that only PPPoE Session is supported. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26dmaengine: mediatek: mtk-hsdma: Fix typo 'the the' in commentSlark Xiao
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220721055647.46085-1-slark_xiao@163.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26dmaengine: axi-dmac: check cache coherency registerMathias Tausen
Marking the DMA as cache coherent (dma-coherent in devicetree) is only safe with versions of axi_dmac that have this feature enabled. Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Mathias Tausen <mta@satlab.com> Link: https://lore.kernel.org/r/20220726140213.786939-1-mta@satlab.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26mm: fix NULL pointer dereference in wp_page_reuse()Qi Zheng
The vmf->page can be NULL when the wp_page_reuse() is invoked by wp_pfn_shared(), it will cause the following panic: BUG: kernel NULL pointer dereference, address: 000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 18 PID: 923 Comm: Xorg Not tainted 5.19.0-rc8.bm.1-amd64 #263 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g14 RIP: 0010:_compound_head+0x0/0x40 [...] Call Trace: wp_page_reuse+0x1c/0xa0 do_wp_page+0x1a5/0x3f0 __handle_mm_fault+0x8cf/0xd20 handle_mm_fault+0xd5/0x2a0 do_user_addr_fault+0x1d0/0x680 exc_page_fault+0x78/0x170 asm_exc_page_fault+0x22/0x30 To fix it, this patch performs a NULL pointer check before dereferencing the vmf->page. Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-26spi: a3700: support BE for AC5 SPI driverNoam
Signed-off-by: Noam <lnoam@marvell.com> Tested-by: Raz Adashi <raza@marvell.com> Reviewed-by: Raz Adashi <raza@marvell.com> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20220726130038.20995-1-vadym.kochan@plvision.eu Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-26drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()Nathan Chancellor
When booting a kernel compiled with clang's CFI protection (CONFIG_CFI_CLANG), there is a CFI failure in drm_simple_kms_crtc_mode_valid() when trying to call simpledrm_simple_display_pipe_mode_valid() through ->mode_valid(): [ 0.322802] CFI failure (target: simpledrm_simple_display_pipe_mode_valid+0x0/0x8): ... [ 0.324928] Call trace: [ 0.324969] __ubsan_handle_cfi_check_fail+0x58/0x60 [ 0.325053] __cfi_check_fail+0x3c/0x44 [ 0.325120] __cfi_slowpath_diag+0x178/0x200 [ 0.325192] drm_simple_kms_crtc_mode_valid+0x58/0x80 [ 0.325279] __drm_helper_update_and_validate+0x31c/0x464 ... The ->mode_valid() member in 'struct drm_simple_display_pipe_funcs' expects a return type of 'enum drm_mode_status', not 'int'. Correct it to fix the CFI failure. Cc: stable@vger.kernel.org Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1647 Reported-by: Tomasz Paweł Gajc <tpgxyz@gmail.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220725233629.223223-1-nathan@kernel.org
2022-07-26hwmon: (occ) Replace open-coded variant of %*phN specifierAndy Shevchenko
printf()-like functions in the kernel have extensions, such as %*phN to dump small pieces of memory as hex bytes. Replace custom approach with the direct use of %*phN. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220726143110.4809-1-andriy.shevchenko@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-26mmc: mediatek: add support for SDIO eint wakup IRQAxe Yang
Add support for eint IRQ when MSDC is used as an SDIO host. This feature requires SDIO device support async IRQ function. With this feature, SDIO host can be awakened by SDIO card in suspend state, without additional pin. MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC turn off clock and switch SDIO DAT1 pin to GPIO mode. And during resume, switch GPIO function back to DAT1 mode then turn on clock. Some device tree property should be added or modified in MSDC node to support SDIO eint IRQ. Pinctrls "state_eint" is mandatory. Since this feature depends on asynchronous interrupts, "wakeup-source", "keep-power-in-suspend" and "cap-sdio-irq" flags are necessary, and the interrupts list should be extended(the interrupt named with sdio_wakeup): &mmcX { ... interrupt-names = "msdc", "sdio_wakeup"; interrupts-extended = <...>, <&pio xxx IRQ_TYPE_LEVEL_LOW>; ... pinctrl-names = "default", "state_uhs", "state_eint"; ... pinctrl-2 = <&mmc2_pins_eint>; ... cap-sdio-irq; keep-power-in-suspend; wakeup-source; ... }; Co-developed-by: Yong Mao <yong.mao@mediatek.com> Signed-off-by: Yong Mao <yong.mao@mediatek.com> Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Axe Yang <axe.yang@mediatek.com> Link: https://lore.kernel.org/r/20220726062842.18846-4-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-26mmc: core: Add support for SDIO wakeup interruptAxe Yang
If wakeup-source flag is set in host dts node, parse EAI information from SDIO CCCR interrupt externsion segment for in-band wakeup. If async interrupt is supported by SDIO card then enable it and set enable_async_irq flag in sdio_cccr structure to 1. The parse flow is implemented in sdio_read_cccr(). Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Axe Yang <axe.yang@mediatek.com> Link: https://lore.kernel.org/r/20220726062842.18846-3-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-26dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls propertiesAxe Yang
Extend interrupts and pinctrls for SDIO wakeup interrupt feature. This feature allow SDIO devices alarm asynchronous interrupt to host even when host stop providing clock to SDIO card. An extra wakeup interrupt and pinctrl states for SDIO DAT1 pin state switching are required in this scenario. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Axe Yang <axe.yang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220726062842.18846-2-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-26dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126Jagan Teki
Add a compatible string for Rockchip RV1126 SoC. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220723204335.750095-12-jagan@edgeble.ai Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-26selftests/bpf: Attach to socketcall() in test_probe_userIlya Leoshkevich
test_probe_user fails on architectures where libc uses socketcall(SYS_CONNECT) instead of connect(). Fix by attaching to socketcall as well. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20220726134008.256968-3-iii@linux.ibm.com
2022-07-26libbpf: Extend BPF_KSYSCALL documentationIlya Leoshkevich
Explicitly list known quirks. Mention that socket-related syscalls can be invoked via socketcall(). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20220726134008.256968-2-iii@linux.ibm.com
2022-07-26bpf, devmap: Compute proper xdp_frame len redirecting framesLorenzo Bianconi
Even if it is currently forbidden to XDP_REDIRECT a multi-frag xdp_frame into a devmap, compute proper xdp_frame length in __xdp_enqueue and is_valid_dst routines running xdp_get_frame_len(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/894d99c01139e921bdb6868158ff8e67f661c072.1658596075.git.lorenzo@kernel.org
2022-07-26hwmon: (sht15) Fix wrong assumptions in device remove callbackUwe Kleine-König
Taking a lock at the beginning of .remove() doesn't prevent new readers. With the existing approach it can happen, that a read occurs just when the lock was taken blocking the reader until the lock is released at the end of the remove callback which then accessed *data that is already freed then. To actually fix this problem the hwmon core needs some adaption. Until this is implemented take the optimistic approach of assuming that all readers are gone after hwmon_device_unregister() and sysfs_remove_group() as most other drivers do. (And once the core implements that, taking the lock would deadlock.) So drop the lock, move the reset to after device unregistration to keep the device in a workable state until it's deregistered. Also add a error message in case the reset fails and return 0 anyhow. (Returning an error code, doesn't stop the platform device unregistration and only results in a little helpful error message before the devm cleanup handlers are called.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220725194344.150098-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-26bridge: Do not send empty IFLA_AF_SPEC attributeBenjamin Poirier
After commit b6c02ef54913 ("bridge: Netlink interface fix."), br_fill_ifinfo() started to send an empty IFLA_AF_SPEC attribute when a bridge vlan dump is requested but an interface does not have any vlans configured. iproute2 ignores such an empty attribute since commit b262a9becbcb ("bridge: Fix output with empty vlan lists") but older iproute2 versions as well as other utilities have their output changed by the cited kernel commit, resulting in failed test cases. Regardless, emitting an empty attribute is pointless and inefficient. Avoid this change by canceling the attribute if no AF_SPEC data was added. Fixes: b6c02ef54913 ("bridge: Netlink interface fix.") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220725001236.95062-1-bpoirier@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26hwmon: (aquacomputer_d5next) Add support for reading the +12V voltage sensor ↵Aleksa Savic
on D5 Next Add support for reading the +12V voltage that the D5 Next pump receives. Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20220726120203.33773-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-26dmaengine: sh: rz-dmac: Add device_synchronize callbackBiju Das
Some on-chip peripheral modules(for eg:- rspi) on RZ/G2L SoC use the same signal for both interrupt and DMA transfer requests. The signal works as a DMA transfer request signal by setting DMARS, and subsequent interrupt requests to the interrupt controller are masked. We can re-enable the interrupt by clearing the DMARS. This patch adds device_synchronize callback for clearing DMARS and thereby allowing DMA consumers to switch to interrupt mode. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220722084430.969333-1-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failedUwe Kleine-König
It's not allowed to quit remove early without cleaning up completely. Otherwise this results in resource leaks that probably yield graver problems later. Here for example some tasklets might survive the lifetime of the sprd-dma device and access sdev which is freed after .remove() returns. As none of the device freeing requires an active device, just ignore the return value of pm_runtime_get_sync(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20220721204054.323602-1-u.kleine-koenig@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26Merge patch series "can: remove litteral strings used for driver names and ↵Marc Kleine-Budde
remove DRV_VERSION" Vincent Mailhol <mailhol.vincent@wanadoo.fr> says: ==================== This is a cleanup series. The patches 1 to 8 get rid of any hardcoded strings and instead relies on the KBUILD_MODNAME macros to get the device name. Patch 9 replaces the ES58X_MODULE_NAME macro with KBUILD_MODNAME in etas_es58x. Finally, also in etas_es58x, patch 10 removes the DRV_VERSION so that the module uses the default behavior and advertise the kernel version instead of a custom version. * Changelog * v1 -> v2: * The patch for esd_usb contained some changes for ems_usb. * v1 assumed that KBUILD_MODNAME could only be used when the file basename and the module had the same name (e.g. vcan.c for the vcan.ko). The fact is that KBUILD_NAME extends to the module name and can thus be used even if the basename is different (e.g. slcan-core.c and slcan.ko) * Add patch #9: can: etas_es58x: replace ES58X_MODULE_NAME with KBUILD_MODNAME v1: https://lore.kernel.org/all/20220725153124.467061-1-mailhol.vincent@wanadoo.fr This series are the first 9 patches of: https://lore.kernel.org/linux-can/20220725133208.432176-1-mailhol.vincent@wanadoo.fr/T/ The initial intent of those 9 patches was to do so cleanup in order to implement ethtool_ops::get_drvinfo but this appeared to be useless: https://lore.kernel.org/linux-can/20220725140911.2djwxfrx3kdmjeuc@pengutronix.de/ Instead, those patch are send as a standalone series. ==================== Drop "[PATCH v2 03/10] can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names" to avoid conflicts with Dario Binacchi's work on the slcan driver. Link: https://lore.kernel.org/all/20220726082707.58758-1-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-26dmaengine: tegra: Add terminate() for Tegra234Akhil R
In certain cases where the DMA client bus gets corrupted or if the end device ceases to send/receive data, DMA can wait indefinitely for the data to be received/sent. Attempting to terminate the transfer will put the DMA in pause flush mode and it remains there. The channel is irrecoverable once this pause times out in Tegra194 and earlier chips. Whereas, from Tegra234, it can be recovered by disabling the channel and reprograming it. Hence add a new terminate() function that ignores the outcome of dma_pause() so that terminate_all() can proceed to disable the channel. Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220720104045.16099-3-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26dt-bindings: dmaengine: Add compatible for Tegra234Akhil R
Document the compatible string used by GPCDMA controller for Tegra234. Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220720104045.16099-2-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26fsnotify: Fix comment typoXin Gao
The double `if' is duplicated in line 104, remove one. Signed-off-by: Xin Gao <gaoxin@cdjrlc.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220722194639.18545-1-gaoxin@cdjrlc.com
2022-07-26ext2: Add more validity checks for inode countsJan Kara
Add checks verifying number of inodes stored in the superblock matches the number computed from number of inodes per group. Also verify we have at least one block worth of inodes per group. This prevents crashes on corrupted filesystems. Reported-by: syzbot+d273f7d7f58afd93be48@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz>
2022-07-26spi/panel: dt-bindings: drop CPHA and CPOL from common propertiesKrzysztof Kozlowski
The spi-cpha and spi-cpol properties are device specific and should be accepted only if device really needs them. Drop them from common spi-peripheral-props.yaml schema, mention in few panel drivers which use them and include instead in the SPI controller bindings. The controller bindings will provide CPHA/CPOL type validation and one place for description. Each device schema must list the properties if they are applicable. Suggested-by: Jonathan Cameron <jic23@kernel.org> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220722191539.90641-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-26bpf: Fix bpf_xdp_pointer return pointerJoanne Koong
For the case where offset + len == size, bpf_xdp_pointer should return a valid pointer to the addr because that access is permitted. We should only return NULL in the case where offset + len exceeds size. Fixes: 3f364222d032 ("net: xdp: introduce bpf_xdp_pointer utility routine") Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/bpf/20220722220105.2065466-1-joannelkoong@gmail.com
2022-07-26Merge branch 'octeontx2-minor-tc-fixes'Paolo Abeni
Subbaraya Sundeep says: ==================== Octeontx2 minor tc fixes This patch set fixes two problems found in tc code wrt to ratelimiting and when installing UDP/TCP filters. Patch 1: CN10K has different register format compared to CN9xx hence fixes that. Patch 2: Check flow mask also before installing a src/dst port filter, otherwise installing for one port installs for other one too. ==================== Link: https://lore.kernel.org/r/1658650874-16459-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26octeontx2-pf: Fix UDP/TCP src and dst port tc filtersSubbaraya Sundeep
Check the mask for non-zero value before installing tc filters for L4 source and destination ports. Otherwise installing a filter for source port installs destination port too and vice-versa. Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26octeontx2-pf: cn10k: Fix egress ratelimit configurationSunil Goutham
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2 to CN10K. CN10K supports larger burst size. Fix burst exponent and burst mantissa configuration for CN10K. Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps' passed by stack is also u64. Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26Merge branch 'octeontx2-minor-tc-fixes'Paolo Abeni
Subbaraya Sundeep says: ==================== Octeontx2 minor tc fixes This patch set fixes two problems found in tc code wrt to ratelimiting and when installing UDP/TCP filters. Patch 1: CN10K has different register format compared to CN9xx hence fixes that. Patch 2: Check flow mask also before installing a src/dst port filter, otherwise installing for one port installs for other one too. ==================== Link: https://lore.kernel.org/r/1658650874-16459-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26octeontx2-pf: Fix UDP/TCP src and dst port tc filtersSubbaraya Sundeep
Check the mask for non-zero value before installing tc filters for L4 source and destination ports. Otherwise installing a filter for source port installs destination port too and vice-versa. Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26octeontx2-pf: cn10k: Fix egress ratelimit configurationSunil Goutham
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2 to CN10K. CN10K supports larger burst size. Fix burst exponent and burst mantissa configuration for CN10K. Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps' passed by stack is also u64. Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26fs/reiserfs/inode: remove dead code in _get_block_create_0()Zeng Jingxiang
Since commit 27b3a5c51b50 ("kill-the-bkl/reiserfs: drop the fs race watchdog from _get_block_create_0()"), which removed a label that may have the pointer 'p' touched in its control flow, related if statements now eval to constant value now. Just remove them. Assigning value NULL to p here 293 char *p = NULL; In the following conditional expression, the value of p is always NULL, As a result, the kunmap() cannot be executed. 308 if (p) 309 kunmap(bh_result->b_page); 355 if (p) 356 kunmap(bh_result->b_page); 366 if (p) 367 kunmap(bh_result->b_page); Also, the kmap() cannot be executed. 399 if (!p) 400 p = (char *)kmap(bh_result->b_page); [JK: Removed unnecessary initialization of 'p' to NULL] Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com> Signed-off-by: Kairui Song <kasong@tencent.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220720083029.1065578-1-zengjx95@gmail.com
2022-07-26selftests/bpf: Don't assign outer source IP to hostPaul Chaignon
The previous commit fixed a bug in the bpf_skb_set_tunnel_key helper to avoid dropping packets whose outer source IP address isn't assigned to a host interface. This commit changes the corresponding selftest to not assign the outer source IP address to an interface. Not assigning the source IP to an interface causes two issues in the existing test: 1. The ARP requests will fail for that IP address so we need to add the ARP entry manually. 2. The encapsulated ICMP echo reply traffic will not reach the VXLAN device. It will be dropped by the stack before, because the outer destination IP is unknown. To solve 2., we have two choices. Either we perform decapsulation ourselves in a BPF program attached at veth1 (the base device for the VXLAN device), or we switch the outer destination address when we receive the packet at veth1, such that the stack properly demultiplexes it to the VXLAN device afterward. This commit implements the second approach, where we switch the outer destination address from the unassigned IP address to the assigned one, only for VXLAN traffic ingressing veth1. Then, at the vxlan device, the BPF program that checks the output of bpf_skb_get_tunnel_key needs to be updated as the expected local IP address is now the unassigned one. Signed-off-by: Paul Chaignon <paul@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/4addde76eaf3477a58975bef15ed2788c44e5f55.1658759380.git.paul@isovalent.com
2022-07-26bpf: Set flow flag to allow any source IP in bpf_tunnel_keyPaul Chaignon
Commit 26101f5ab6bd ("bpf: Add source ip in "struct bpf_tunnel_key"") added support for getting and setting the outer source IP of encapsulated packets via the bpf_skb_{get,set}_tunnel_key BPF helper. This change allows BPF programs to set any IP address as the source, including for example the IP address of a container running on the same host. In that last case, however, the encapsulated packets are dropped when looking up the route because the source IP address isn't assigned to any interface on the host. To avoid this, we need to set the FLOWI_FLAG_ANYSRC flag. Fixes: 26101f5ab6bd ("bpf: Add source ip in "struct bpf_tunnel_key"") Signed-off-by: Paul Chaignon <paul@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/76873d384e21288abe5767551a0799ac93ec07fb.1658759380.git.paul@isovalent.com
2022-07-26geneve: Use ip_tunnel_key flow flags in route lookupsPaul Chaignon
Use the new ip_tunnel_key field with the flow flags in the IPv4 route lookups for the encapsulated packet. This will be used by the bpf_skb_set_tunnel_key helper in the subsequent commit. Signed-off-by: Paul Chaignon <paul@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/fcc2e0eea01e8ea465a180126366ec20596ba530.1658759380.git.paul@isovalent.com
2022-07-26vxlan: Use ip_tunnel_key flow flags in route lookupsPaul Chaignon
Use the new ip_tunnel_key field with the flow flags in the IPv4 route lookups for the encapsulated packet. This will be used by the bpf_skb_set_tunnel_key helper in a subsequent commit. Signed-off-by: Paul Chaignon <paul@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/1ffc95c3d60182fd5ec0cf6602083f8f68afe98f.1658759380.git.paul@isovalent.com
2022-07-26ip_tunnels: Add new flow flags field to ip_tunnel_keyPaul Chaignon
This commit extends the ip_tunnel_key struct with a new field for the flow flags, to pass them to the route lookups. This new field will be populated and used in subsequent commits. Signed-off-by: Paul Chaignon <paul@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/f8bfd4983bd06685a59b1e3ba76ca27496f51ef3.1658759380.git.paul@isovalent.com
2022-07-26sfc/siena: fix repeated words in commentswangjianli
Delete the redundant word 'in'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Link: https://lore.kernel.org/r/20220724075207.21080-1-wangjianli@cdjrlc.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-10-03 11:05:16 +0000