| Age | Commit message (Collapse) | Author |
|---|
|
commit 2d87dc0e5be2 ("arm64: dts: renesas: r8a7795: Add address
properties to rcar_sound port nodes") added missing #address-cells
and #size-cells for sound ports.
But, these are based on platform, not on SoC. This patch cleanups it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Add the device nodes for both RZ/G2M CAN channels.
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
As I'll no longer be working with Arm, add a mailmap entry so any mail
directed towards me reaches the appropriate mailbox.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The Pine H64 board has an Ethernet port, which is connected to a
RTL8211E PHY, then the PHY is connected to the MAC on H6 SoC.
Add support for the Ethernet port.
The PHY needs some time to start up, and the time is modelled as enable
ramp delay of the regulator.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Allwinner H6 SoC has an EMAC like the one in A64.
Add device tree nodes for the H6 DTSI file.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The Allwinner H6 SoC features a Ethernet MAC that is similar to the one
in A64.
Add a compatible string for it with A64 fallback compatible string, in
this case the A64 driver can be used.
The "internal" PHY is not internal from the perspective of the H6 main
die, instead it's on the co-packaged AC200 chip, and connected to the
main die with RMII at the in-package Port A PIO bank. So from the SoC
driver side it needs no special treatment.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Add the power-domain nodes to both rk3066 and rk3188 including
their clocks and qos connections.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
QoS nodes keep information about priorites etc on the interconnect
and loose state when the power-domain gets disabled. Therefore the
power-domain driver stores the settings of available qos nodes and
restores them when the power-domain gets enabled again.
So add the qos nodes found on the Cortex-A9 socs from Rockchip, so
that they can then be connected to the power-domains.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
|
|
Add rk3066 power-domains as described by the TRM.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Add rk3188 power-domains as described by the TRM.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
nanddev_neraseblocks() currently returns the number pages per LUN
instead of the total number of eraseblocks.
Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Remove kernel-doc notation for a deleted function parameter to prevent
a kernel-doc warning:
../drivers/mtd/nand/raw/nand_base.c:603: warning: Excess function parameter 'mtd' description in 'panic_nand_wait'
Fixes: f1d46942e823 ("mtd: rawnand: Pass a nand_chip object to chip->waitfunc()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
Backlight power is controlled by PH6 GPIO, so add corresponding
regulator-fixed node for it. Otherwise backlight won't light up
if bootloader doesn't enable it.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The actual hardware has 4 data lines. Use them.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
I noticed during the creation of another bugfix that the BCH_CONST_PARAMS
option that is set by DOCG3 breaks setting variable parameters for any
other users of the BCH library code.
The only other user we have today is the MTD_NAND software BCH
implementation (most flash controllers use hardware BCH these days
and are not affected). I considered removing BCH_CONST_PARAMS entirely
because of the inherent conflict, but according to the description in
lib/bch.c there is a significant performance benefit in keeping it.
To avoid the immediate problem of the conflict between MTD_NAND_BCH
and DOCG3, this only sets the constant parameters if MTD_NAND_BCH
is disabled, which should fix the problem for all cases that
are affected. This should also work for all stable kernels.
Note that there is only one machine that actually seems to use the
DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have
the driver disabled, but it almost certainly shows up if we wanted
to test random kernels on machines that use software BCH in MTD.
Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code")
Cc: stable@vger.kernel.org
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
The backlight is for the eDP panel and it has the connector on the excavator baseboard.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
After commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED
linearly to human eye") the pwm_bl driver is able to calculate a default
brightness table. The calculated table for this PWM will have more
granularity and will be adjusted to change the brightness linearly to
the human eye. Use that table instead of have a DT-defined table with
less granularity.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
In order to use earlycon, the stdout-path property needs to be set
in the chosen node.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
eMMC that's sold by Pine64 can do HS200, rk3328 can do it
as well, so update DTS to enable it.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Sapphire board has a 12V fan. So, adding it to the DTS.
There is no power supply directly connected, it needs the baseboard to
work.
If the board is used standalone then a hardware modification is needed.
On the Sapphire board there is an unpopulated resistor to connect it to
VBUS_TYPEC, which is usually 5V (too low) and can range up to 20V
(too high).
I tested it for a week connected to VCC_SYS which is 8.4V and proved to
be more than enough for the required cooling needs. This is the
connection described in the comment.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add spi dma channels as specified by the rk3399 TRM.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Since connectors can be created dynamically, fbdev should be initialized
even if there are no connectors at the moment. Otherwise fbdev will
not be created even after connector's appearance.
The patch fixes lack of fbdev on rinato and trats boards.
Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
DSI device can be attached after DRM device is registered. In such
case newly created connector must be registered by exynos_dsi.
The patch fixes exynos_drm on rinato and trats boards.
Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b
This patch makes it to need get_vblank_counter callback in crtc
to get frame counter from decon driver.
However, drm_dev->max_vblank_count is a member unique to
vendor's DRM driver but in case of ARM DRM, some CRTC devices
don't provide the frame counter value. As a result, this patch
made extension and clone mode not working.
Instead of this patch, we may need separated max_vblank_count
which belongs to each CRTC device, or need to implement frame
counter emulation for them who don't support HW frame counter.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The of_drm_find_panel() function returns error pointers and never NULL
but we the driver assumes that ->panel is NULL when it's not present.
Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Switch to the new coresight bindings for hw ports
Cc: orsonzhai@gmail.com
Cc: zhang.lyra@gmail.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
|
|
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/f259b21b-1f2b-f215-00d2-23388bed2530@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The first group of warnings is caused by a "/**" kernel-doc notation
marker but the function comments are not in kernel-doc format.
Also add another error return value here.
../kernel/resource.c:337: warning: Function parameter or member 'start' not described in 'find_next_iomem_res'
../kernel/resource.c:337: warning: Function parameter or member 'end' not described in 'find_next_iomem_res'
../kernel/resource.c:337: warning: Function parameter or member 'flags' not described in 'find_next_iomem_res'
../kernel/resource.c:337: warning: Function parameter or member 'desc' not described in 'find_next_iomem_res'
../kernel/resource.c:337: warning: Function parameter or member 'first_lvl' not described in 'find_next_iomem_res'
../kernel/resource.c:337: warning: Function parameter or member 'res' not described in 'find_next_iomem_res'
Add the missing function parameter documentation for the other warnings:
../kernel/resource.c:409: warning: Function parameter or member 'arg' not described in 'walk_iomem_res_desc'
../kernel/resource.c:409: warning: Function parameter or member 'func' not described in 'walk_iomem_res_desc'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b69c2e20f6e4 ("resource: Clean it up a bit")
Link: http://lkml.kernel.org/r/dda2e4d8-bedd-3167-20fe-8c7d2d35b354@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Duplicated 'case it'.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Xi Xu <xu.xi8@zte.com.cn>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: zhong.weidong@zte.com.cn
Link: http://lkml.kernel.org/r/1541379013-11352-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
i.MX6 SoCs has MMDC clock gates in CCM CCGR, add
clock property for MMDC driver's clock operation.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The LX2160A QorIQ Development System (QDS) is a test, evaluation, and
development platform, supporting QorIQ LX2160A processor.
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
LX2160A reference design board (RDB) is a high-performance
computing, evaluation, and development platform with LX2160A
SoC.
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
LX2160A SoC is based on Layerscape Chassis Generation 3.2 Architecture.
LX2160A features an advanced 16 64-bit ARM v8 CortexA72 processor cores
in 8 cluster, CCN508, GICv3,two 64-bit DDR4 memory controller, 8 I2C
controllers, 3 dspi, 2 esdhc,2 USB 3.0, mmu 500, 3 SATA, 4 PL011 SBSA
UARTs etc.
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Drop reg property from fixed regulator and remove the unncessary bus
node.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This would help us to get early boot logs by passing "earlycon" to
kernel bootargs.
Further, by adding this we don't have to depend on complex earlyprintk
configs for early boot logs.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The DCP block on 6ull has no major differences other than requiring
explicit clock enabling.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This commit adds DTS support for BK4 device from Liebherr. It
uses vf610 SoC from NXP.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add Pincfgs for UART4 to enable Communication with the onboard SAM3X
Signed-off-by: Markus Kueffner <kueffner.markus@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the ZII SCU 4 board, which has lots of switches and
SFF ports.
Based on the work from Andrew Lunn.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings for "fixed-regulator" only explicitly support "gpio" property,
not "gpios". Fix by correcting the property name.
The enet PHYs on imx6sx-sdb needs to be explicitly reset after a power
cycle, this can be handled by the phy-reset-gpios property. Sadly this
is not handled on suspend: the fec driver turns phy-supply off but
doesn't assert phy-reset-gpios again on resume.
Since additional phy-level work is required to support powering off the
phy in suspend fix the problem by just marking the regulator as
"boot-on" "always-on" so that it's never turned off. This behavior is
equivalent to older releases.
Keep the phy-reset-gpios property on fec anyway because it is a correct
description of board design.
This issue was exposed by commit efdfeb079cc3 ("regulator: fixed:
Convert to use GPIO descriptor only") which causes the "gpios" property
to also be parsed. Before that commit the "gpios" property had no
effect, PHY reset was only handled in the the bootloader.
This fixes linux-next boot failures previously reported here:
https://lore.kernel.org/patchwork/patch/982437/#1177900
https://lore.kernel.org/patchwork/patch/994091/#1178304
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
A quoted label reference doesn't expand to the node path and is taken as
a literal string. Dropping the quotes can fix this unless the baudrate
string is appended in which case we have to use the alias.
At least on VF610, the problem was masked by setting the console in
bootargs. Use the alias syntax with baudrate parameter so we can drop
setting the console in bootargs.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix the type of compatible string "fs,imx6sll-i2c" which should be
"fsl,imx6sll-i2c".
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to
BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values
were read, to fix a problem with slaves getting into weird states, but
in the process, broke tracking of link failures, as going straight to
BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted)
means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because
!link_state was already true, we never incremented commit, and never got
a chance to call bond_miimon_commit(), where slave->link_failure_count
would be incremented. I believe the simple fix here is to mark the slave
as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from
_FAIL to either _UP or _DOWN, and in the latter case, we now get proper
incrementing of link_failure_count again.
Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event")
CC: Mahesh Bandewar <maheshb@google.com>
CC: David S. Miller <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since 4.19 the following error in sysfs has appeared when using the
r8169 NIC driver:
$cd /sys/module/realtek/drivers
$ls -l
ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory
[..garbled dir entries follow..]
Apparently the forward slash in "10/100Mbps Ethernet" is interpreted
as directory separator that leads nowhere, and was introduced in commit
513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions").
Fix this by removing the offending slash in the driver name.
Other drivers in net/phy seem to have the same problem, but I cannot
test/verify them.
Fixes: 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions")
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If gcc decides not to inline make_sensor_label():
WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label()
The function .create_device_attrs() references
the function __init .make_sensor_label().
This is often because .create_device_attrs lacks a __init
annotation or the annotation of .make_sensor_label is wrong.
As .probe() can be called after freeing of __init memory, all __init
annotiations in the driver are bogus, and should be removed.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix double-free that happens when thermal zone setup fails, see KASAN log
below.
==================================================================
BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c
CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G B 4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
Backtrace:
[<c0110540>] (dump_backtrace) from [<c0110944>] (show_stack+0x20/0x24)
[<c0110924>] (show_stack) from [<c105cb08>] (dump_stack+0x9c/0xb0)
[<c105ca6c>] (dump_stack) from [<c02fdaec>] (print_address_description+0x68/0x250)
[<c02fda84>] (print_address_description) from [<c02fd4ac>] (kasan_report_invalid_free+0x68/0x88)
[<c02fd444>] (kasan_report_invalid_free) from [<c02fc85c>] (__kasan_slab_free+0x1f4/0x200)
[<c02fc668>] (__kasan_slab_free) from [<c02fd0c0>] (kasan_slab_free+0x14/0x18)
[<c02fd0ac>] (kasan_slab_free) from [<c02f9c6c>] (kfree+0x90/0x294)
[<c02f9bdc>] (kfree) from [<c0b41bbc>] (__hwmon_device_register+0x5dc/0xa7c)
[<c0b415e0>] (__hwmon_device_register) from [<c0b421e8>] (hwmon_device_register_with_info+0xa0/0xa8)
[<c0b42148>] (hwmon_device_register_with_info) from [<c0b42324>] (devm_hwmon_device_register_with_info+0x74/0xb4)
[<c0b422b0>] (devm_hwmon_device_register_with_info) from [<c0b4481c>] (lm90_probe+0x414/0x578)
[<c0b44408>] (lm90_probe) from [<c0aeeff4>] (i2c_device_probe+0x35c/0x384)
[<c0aeec98>] (i2c_device_probe) from [<c08776cc>] (really_probe+0x290/0x3e4)
[<c087743c>] (really_probe) from [<c0877a2c>] (driver_probe_device+0x80/0x1c4)
[<c08779ac>] (driver_probe_device) from [<c0877da8>] (__device_attach_driver+0x104/0x11c)
[<c0877ca4>] (__device_attach_driver) from [<c0874dd8>] (bus_for_each_drv+0xa4/0xc8)
[<c0874d34>] (bus_for_each_drv) from [<c08773b0>] (__device_attach+0xf0/0x15c)
[<c08772c0>] (__device_attach) from [<c0877e24>] (device_initial_probe+0x1c/0x20)
[<c0877e08>] (device_initial_probe) from [<c08762f4>] (bus_probe_device+0xdc/0xec)
[<c0876218>] (bus_probe_device) from [<c0876a08>] (deferred_probe_work_func+0xa8/0xd4)
[<c0876960>] (deferred_probe_work_func) from [<c01527c4>] (process_one_work+0x3dc/0x96c)
[<c01523e8>] (process_one_work) from [<c01541e0>] (worker_thread+0x4ec/0x8bc)
[<c0153cf4>] (worker_thread) from [<c015b238>] (kthread+0x230/0x240)
[<c015b008>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
Exception stack(0xcf743fb0 to 0xcf743ff8)
3fa0: 00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Allocated by task 132:
kasan_kmalloc.part.1+0x58/0xf4
kasan_kmalloc+0x90/0xa4
kmem_cache_alloc_trace+0x90/0x2a0
__hwmon_device_register+0xbc/0xa7c
hwmon_device_register_with_info+0xa0/0xa8
devm_hwmon_device_register_with_info+0x74/0xb4
lm90_probe+0x414/0x578
i2c_device_probe+0x35c/0x384
really_probe+0x290/0x3e4
driver_probe_device+0x80/0x1c4
__device_attach_driver+0x104/0x11c
bus_for_each_drv+0xa4/0xc8
__device_attach+0xf0/0x15c
device_initial_probe+0x1c/0x20
bus_probe_device+0xdc/0xec
deferred_probe_work_func+0xa8/0xd4
process_one_work+0x3dc/0x96c
worker_thread+0x4ec/0x8bc
kthread+0x230/0x240
ret_from_fork+0x14/0x38
(null)
Freed by task 132:
__kasan_slab_free+0x12c/0x200
kasan_slab_free+0x14/0x18
kfree+0x90/0x294
hwmon_dev_release+0x1c/0x20
device_release+0x4c/0xe8
kobject_put+0xac/0x11c
device_unregister+0x2c/0x30
__hwmon_device_register+0xa58/0xa7c
hwmon_device_register_with_info+0xa0/0xa8
devm_hwmon_device_register_with_info+0x74/0xb4
lm90_probe+0x414/0x578
i2c_device_probe+0x35c/0x384
really_probe+0x290/0x3e4
driver_probe_device+0x80/0x1c4
__device_attach_driver+0x104/0x11c
bus_for_each_drv+0xa4/0xc8
__device_attach+0xf0/0x15c
device_initial_probe+0x1c/0x20
bus_probe_device+0xdc/0xec
deferred_probe_work_func+0xa8/0xd4
process_one_work+0x3dc/0x96c
worker_thread+0x4ec/0x8bc
kthread+0x230/0x240
ret_from_fork+0x14/0x38
(null)
Cc: <stable@vger.kernel.org> # v4.15+
Fixes: 47c332deb8e8 ("hwmon: Deal with errors from the thermal subsystem")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
|
|
Pull UBIFS updates from Richard Weinberger:
- Full filesystem authentication feature, UBIFS is now able to have the
whole filesystem structure authenticated plus user data encrypted and
authenticated.
- Minor cleanups
* tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits)
ubifs: Remove unneeded semicolon
Documentation: ubifs: Add authentication whitepaper
ubifs: Enable authentication support
ubifs: Do not update inode size in-place in authenticated mode
ubifs: Add hashes and HMACs to default filesystem
ubifs: authentication: Authenticate super block node
ubifs: Create hash for default LPT
ubfis: authentication: Authenticate master node
ubifs: authentication: Authenticate LPT
ubifs: Authenticate replayed journal
ubifs: Add auth nodes to garbage collector journal head
ubifs: Add authentication nodes to journal
ubifs: authentication: Add hashes to index nodes
ubifs: Add hashes to the tree node cache
ubifs: Create functions to embed a HMAC in a node
ubifs: Add helper functions for authentication support
ubifs: Add separate functions to init/crc a node
ubifs: Format changes for authentication support
ubifs: Store read superblock node
ubifs: Drop write_node
...
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Bugfix:
- Fix build issues on architectures that don't provide 64-bit cmpxchg
Cleanups:
- Fix a spelling mistake"
* tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: fix spelling mistake, EACCESS -> EACCES
SUNRPC: Use atomic(64)_t for seq_send(64)
|
