| Age | Commit message (Collapse) | Author |
|---|
|
When committing inmem pages is successful, we revoke already committed
blocks in __revoke_inmem_pages() and finally replace the committed
ones with the old blocks using f2fs_replace_block(). However, if
the committed block was newly created one, the address of the old
block is NEW_ADDR and __f2fs_replace_block() cannot handle NEW_ADDR
as new_blkaddr properly and a kernel panic occurrs.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Tested-by: Shu Tan <shu.tan@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If add state fails in case of device offload, netdev refcount
will be negative since gc task is attempting to dev_free this state.
This is fixed by putting NULL in state dev field.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Boris Pismeny <borisp@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
This adds a new ioctl, KVM_PPC_GET_CPU_CHAR, that gives userspace
information about the underlying machine's level of vulnerability
to the recently announced vulnerabilities CVE-2017-5715,
CVE-2017-5753 and CVE-2017-5754, and whether the machine provides
instructions to assist software to work around the vulnerabilities.
The ioctl returns two u64 words describing characteristics of the
CPU and required software behaviour respectively, plus two mask
words which indicate which bits have been filled in by the kernel,
for extensibility. The bit definitions are the same as for the
new H_GET_CPU_CHARACTERISTICS hypercall.
There is also a new capability, KVM_CAP_PPC_GET_CPU_CHAR, which
indicates whether the new ioctl is available.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
In mixed read/write workload on SSD, write latency is much lower than
read. But now we only track and record read latency and then use it as
threshold base for both read and write io latency accounting. As a
result, write io latency will always be considered as good and
bad_bio_cnt is much smaller than 20% of bio_cnt. That is to mean, the
tg to be checked will be treated as idle most of the time and still let
others dispatch more ios, even it is truly running under low limit and
wants its low limit to be guaranteed, which is not we expected in fact.
So track read and write request individually, which can bring more
precise latency control for low limit idle detection.
Signed-off-by: Joseph Qi <qijiang.qj@alibaba-inc.com>
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Display corruption regression bugfix with both a prep patch and a
follow-up fix
* tag 'drm-intel-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Redo plane sanitation during readout
drm/i915: Add .get_hw_state() method for planes
|
|
Packet descriptor generation for IPv6 is broken.
Properly set L3 and L4 protocol flags for IPv6 descriptors.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set some missing fields in the IP control offload buffer. This buffer is
used to enable checksum and TCP segmentation offload in the VNIC server.
The buffer length field and the checksum offloading bits were not set
properly, so fix that here.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2018-01-18
====================
this is a pull reqeust of two patches for net/master:
The syzkaller project triggered two WARN_ONCE() in the af_can code from
userspace and we decided to replace it by a pr_warn_once().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 4512c43eac7e, if we add a route to the subtree of tb6_root
which does not have any route attached to it yet, the current code will
let tb6_root and the node in the subtree share the same route.
This could cause problem cause tb6_root has RTN_INFO flag marked and the
tree repair and clean up code will not work properly.
This commit makes sure tb6_root->leaf points back to null_entry instead
of sharing route with other node.
It fixes the following syzkaller reported issue:
BUG: KASAN: use-after-free in ipv6_prefix_equal include/net/ipv6.h:540 [inline]
BUG: KASAN: use-after-free in fib6_add_1+0x165f/0x1790 net/ipv6/ip6_fib.c:618
Read of size 8 at addr ffff8801bc043498 by task syz-executor5/19819
CPU: 1 PID: 19819 Comm: syz-executor5 Not tainted 4.15.0-rc7+ #186
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430
ipv6_prefix_equal include/net/ipv6.h:540 [inline]
fib6_add_1+0x165f/0x1790 net/ipv6/ip6_fib.c:618
fib6_add+0x5fa/0x1540 net/ipv6/ip6_fib.c:1214
__ip6_ins_rt+0x6c/0x90 net/ipv6/route.c:1003
ip6_route_add+0x141/0x190 net/ipv6/route.c:2790
ipv6_route_ioctl+0x4db/0x6b0 net/ipv6/route.c:3299
inet6_ioctl+0xef/0x1e0 net/ipv6/af_inet6.c:520
sock_do_ioctl+0x65/0xb0 net/socket.c:958
sock_ioctl+0x2c2/0x440 net/socket.c:1055
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
entry_SYSCALL_64_fastpath+0x23/0x9a
RIP: 0033:0x452ac9
RSP: 002b:00007fd42b321c58 EFLAGS: 00000212 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000071bea0 RCX: 0000000000452ac9
RDX: 0000000020fd7000 RSI: 000000000000890b RDI: 0000000000000013
RBP: 000000000000049e R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000212 R12: 00000000006f4f70
R13: 00000000ffffffff R14: 00007fd42b3226d4 R15: 0000000000000000
Fixes: 4512c43eac7e ("ipv6: remove null_entry before adding default route")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thought I'd try my luck getting one more in:
- Two fixes for Tegra (one is to common code, but our userspace doesn't hit it).
- One for NV5x-class MCPs
* 'linux-4.15' of git://github.com/skeggsb/linux:
drm/nouveau/mmu/mcp77: fix regressions in stolen memory handling
drm/nouveau/bar/gk20a: Avoid bar teardown during init
drm/nouveau/drm/nouveau: Pass the proper arguments to nvif_object_map_handle()
|
|
gcc-4.4.4 has problems witn anon union initializers. Work around this.
net/sched/sch_prio.c: In function 'prio_dump_offload':
net/sched/sch_prio.c:260: error: unknown field 'stats' specified in initializer
net/sched/sch_prio.c:260: warning: initialization makes integer from pointer without a cast
net/sched/sch_prio.c:261: error: unknown field 'stats' specified in initializer
net/sched/sch_prio.c:261: warning: initialization makes integer from pointer without a cast
Fixes: 7fdb61b44c0c95 ("net: sch: prio: Add offload ability to PRIO qdisc")
Cc: Nogah Frankel <nogahf@mellanox.com>
Cc: Yuval Mintz <yuvalm@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit b05229f44228 ("gre6: Cleanup GREv6 transmit path,
call common GRE functions") moved dev->mtu initialization
from ip6gre_tunnel_setup() to ip6gre_tunnel_init(), as a
result, the previously set values, before ndo_init(), are
reset in the following cases:
* rtnl_create_link() can update dev->mtu from IFLA_MTU
parameter.
* ip6gre_tnl_link_config() is invoked before ndo_init() in
netlink and ioctl setup, so ndo_init() can reset MTU
adjustments with the lower device MTU as well, dev->mtu
and dev->hard_header_len.
Not applicable for ip6gretap because it has one more call
to ip6gre_tnl_link_config(tunnel, 1) in ip6gre_tap_init().
Fix the first case by updating dev->mtu with 'tb[IFLA_MTU]'
parameter if a user sets it manually on a device creation,
and fix the second one by moving ip6gre_tnl_link_config()
call after register_netdevice().
Fixes: b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions")
Fixes: db2ec95d1ba4 ("ip6_gre: Fix MTU setting")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a new LPM tree is created, we try to replace the trees in the
existing virtual routers with it. If we fail, the tree needs to be
freed.
Currently, this does not happen in the unlikely case where we fail to
bind the tree to the first virtual router, since its reference count
never transitions from 1 to 0.
Fix that by taking a reference before binding the tree.
Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- Fixes addition of stolen memory base address to PTEs.
- Removes support for compression.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
|
|
Commit bbb163e18960 ("drm/nouveau/bar: implement bar1 teardown")
introduced add a teardown helper function for BAR1. During
initialisation of the Nouveau, initially all the teardown helpers are
called once, before calling their init counterparts. For gk20a, after
the BAR1 teardown function is called, the device is hanging during the
initialisation of the FB sub-device. At this point it is unclear why
this is happening and this is still under investigation. However, this
change is preventing Tegra124 devices from booting when Nouveau is
enabled. To allow Tegra124 to boot, remove the teardown helper for
gk20a.
This is based upon a previous patch by Guillaume Tucker but limits
the workaround to only gk20a GPUs.
Fixes: bbb163e18960 ("drm/nouveau/bar: implement bar1 teardown")
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This is obviously wrong in the current code. Make sure to record the
correct size of the arguments and pass the actual arguments to the
nvif_object_map_handle() function.
Suggested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Jakub Kicinski says:
====================
This set brings in the rest of map offload code held up by urgent
fixes and improvements to the BPF arrays.
The first 3 patches take care of array map offload, similarly to
hash maps the attribute validation is split out to a separate map
op, and used for both offloaded and non-offloaded case (allocation
only happens if map is on the host). Offload support comes down
to allowing this map type through the offload check in the core.
NFP driver also rejects the delete operation in case of array maps.
Subsequent patches add reporting of target device in a very similar
way target device of programs is reported (ifindex+netns dev/ino).
Netdevsim is extended with a trivial map implementation allowing us
to test the offload in test_offload.py.
Last patch adds a small busy wait to NFP map IO, this improves the
response times which is especially useful for map dumps.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Scheduling out and in for every FW message can slow us down
unnecessarily. Our experiments show that even under heavy load
the FW responds to 99.9% messages within 200 us. Add a short
busy wait before entering the wait queue.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Check map device information is reported correctly, and perform
basic map operations. Check device destruction gets rid of the
maps and map allocation failure path by telling netdevsim to
reject map offload via DebugFS.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add to netdevsim ability to pretend it's offloading BPF maps.
We only allow allocation of tiny 2 entry maps, to keep things
simple. Mutex lock may seem heavy for the operations we
perform, but we want to make sure callbacks can sleep.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Print the information about device on which map is created.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Tell user space about device on which the map was created.
Unfortunate reality of user ABI makes sharing this code
with program offload difficult but the information is the
same.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The special handling of different map types is left to the driver.
Allow offload of array maps by simply adding it to accepted types.
For nfp we have to make sure array elements are not deleted.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Arraymap was not converted to use bpf_map_init_from_attr()
to avoid merge conflicts with emergency fixes. Do it now.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Use the new callback to perform allocation checks for array maps.
The fd maps don't need a special allocation callback, they only
need a special check callback.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The switch to uuid_t invereted the logic of verfication that &entry->fsuuid
is zero during parsing of "fsuuid=" rule. Instead of making sure the
&entry->fsuuid field is not attempted to be overwritten, we bail out for
perfectly correct rule.
Fixes: 787d8c530af7 ("ima/policy: switch to use uuid_t")
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
|
|
Alexei Starovoitov says:
====================
BPF verifier has 700+ tests used to check correctness of the verifier.
Beyond checking the verifier log tell kernel to run accepted programs
as well via bpf_prog_test_run() command. That improves quality of the
tests and increases bpf test coverage.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
to improve test coverage make test_verifier run all successfully loaded
programs on 64-byte zero initialized data.
For clsbpf and xdp it means empty 64-byte packet.
For lwt and socket_filters it's 64-byte packet where skb->data
points after L2.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
in order to improve test coverage allow socket_filter program type
to be run via bpf_prog_test_run command.
Since such programs can be loaded by non-root tighten
permissions for bpf_prog_test_run to be root only
to avoid surprises.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
syzbot reported yet another crash [1] that is caused by
insufficient validation of DODGY packets.
Two bugs are happening here to trigger the crash.
1) Flow dissection leaves with incorrect thoff field.
2) skb_probe_transport_header() sets transport header to this invalid
thoff, even if pointing after skb valid data.
3) qdisc_pkt_len_init() reads out-of-bound data because it
trusts tcp_hdrlen(skb)
Possible fixes :
- Full flow dissector validation before injecting bad DODGY packets in
the stack.
This approach was attempted here : https://patchwork.ozlabs.org/patch/
861874/
- Have more robust functions in the core.
This might be needed anyway for stable versions.
This patch fixes the flow dissection issue.
[1]
CPU: 1 PID: 3144 Comm: syzkaller271204 Not tainted 4.15.0-rc4-mm1+ #49
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:355 [inline]
kasan_report+0x23b/0x360 mm/kasan/report.c:413
__asan_report_load2_noabort+0x14/0x20 mm/kasan/report.c:432
__tcp_hdrlen include/linux/tcp.h:35 [inline]
tcp_hdrlen include/linux/tcp.h:40 [inline]
qdisc_pkt_len_init net/core/dev.c:3160 [inline]
__dev_queue_xmit+0x20d3/0x2200 net/core/dev.c:3465
dev_queue_xmit+0x17/0x20 net/core/dev.c:3554
packet_snd net/packet/af_packet.c:2943 [inline]
packet_sendmsg+0x3ad5/0x60a0 net/packet/af_packet.c:2968
sock_sendmsg_nosec net/socket.c:628 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:638
sock_write_iter+0x31a/0x5d0 net/socket.c:907
call_write_iter include/linux/fs.h:1776 [inline]
new_sync_write fs/read_write.c:469 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:482
vfs_write+0x189/0x510 fs/read_write.c:544
SYSC_write fs/read_write.c:589 [inline]
SyS_write+0xef/0x220 fs/read_write.c:581
entry_SYSCALL_64_fastpath+0x1f/0x96
Fixes: 34fad54c2537 ("net: __skb_flow_dissect() must cap its return value")
Fixes: a6e544b0a88b ("flow_dissector: Jump to exit code in __skb_flow_dissect")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial fix removes unneeded semicolons after if blocks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Christopher Díaz Riveros <chrisadr@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.15
One last set of fixes for regression submitted during the last few days.
bcma & ssb
* fix older build problems which (apparently) recently became more
frequent in certain MIPS configurations
brcmfmac
* continue driver initialisation even if CLM blob (firmware) file is
not found
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The to parameter of gfs2_page_add_databufs is passed inconsistently:
once as from + len, once as from + len - 1. Just pass len instead.
In addition, once we're past the end, we can immediately break out of
the loop.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Add a small inline function for computing the maximum size of a stuffed
inode instead of open coding that in several places throughout the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Since AVR32 was removed, pata_at32 is unselectable/uncompilable.
Remove this driver.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git
|
|
Update tools/include/uapi/linux/bpf.h to bring it in sync with
include/uapi/linux/bpf.h. The listed commits forgot to update it.
Fixes: 02dd3291b2f0 ("bpf: finally expose xdp_rxq_info to XDP bpf-programs")
Fixes: f19397a5c656 ("bpf: Add access to snd_cwnd and others in sock_ops")
Fixes: 06ef0ccb5a36 ("bpf/cgroup: fix a verification error for a CGROUP_DEVICE type prog")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
There is a static checker warning that "proglen" has an upper bound but
no lower bound. The allocation will just fail harmlessly so it's not a
big deal.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
If ttm_bo_swapout doesn't own the lock, don't release it. Someone
else probably depends on it still being locked.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A BO that's already swapped would be added back to the swap-LRU list
for example if its validation failed under high memory pressure. This
could later lead to swapping it out again and leaking previous swap
storage.
This commit adds a condition to prevent that from happening.
v2: Check page_flags instead of swap_storage
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Doc BPF ld/ldx size defines as comments in code, as it makes in
faster to lookup in a programming/review setting, than looking up
the sizes in Documentation/networking/filter.txt.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
RV doesn't support it.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The handle describes kernel logical address, should be
unsigned long and not uint32_t.
Fixes KASAN error and GFP on driver unload.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
add this for correctly updating global mem count in ttm_mem_zone.
before that when ttm_mem_global_alloc_page fails, we would update all
dma_page's global mem count in ttm_dma->pages_list. but actually here
we should not update for the last dma_page.
v2: only the update of last dma_page is not right
v3: use lower bits of dma_page vaddr
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since enums do not get converted by the TRACE_EVENT macro into their values,
the event format displaces the enum name and not the value. This breaks
tools like perf and trace-cmd that need to interpret the raw binary data. To
solve this, an enum map was created to convert these enums into their actual
numbers on boot up. This is done by TRACE_EVENTS() adding a
TRACE_DEFINE_ENUM() macro.
Some enums were not being converted. This was caused by an optization that
had a bug in it.
All calls get checked against this enum map to see if it should be converted
or not, and it compares the call's system to the system that the enum map
was created under. If they match, then they call is processed.
To cut down on the number of iterations needed to find the maps with a
matching system, since calls and maps are grouped by system, when a match is
made, the index into the map array is saved, so that the next call, if it
belongs to the same system as the previous call, could start right at that
array index and not have to scan all the previous arrays.
The problem was, the saved index was used as the variable to know if this is
a call in a new system or not. If the index was zero, it was assumed that
the call is in a new system and would keep incrementing the saved index
until it found a matching system. The issue arises when the first matching
system was at index zero. The next map, if it belonged to the same system,
would then think it was the first match and increment the index to one. If
the next call belong to the same system, it would begin its search of the
maps off by one, and miss the first enum that should be converted. This left
a single enum not converted properly.
Also add a comment to describe exactly what that index was for. It took me a
bit too long to figure out what I was thinking when debugging this issue.
Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com
Cc: stable@vger.kernel.org
Fixes: 0c564a538aa93 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Teste-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
A cleanup of the PM code left an incorrect #ifdef in place, leading
to a harmless build warning:
drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2502:12: error: 'fm10k_suspend' defined but not used [-Werror=unused-function]
drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2475:12: error: 'fm10k_resume' defined but not used [-Werror=unused-function]
It's easier to use __maybe_unused attributes here, since you
can't pick the wrong one.
Fixes: 8249c47c6ba4 ("fm10k: use generic PM hooks instead of legacy PCIe power hooks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In bringing back the context checks, the code checks first if its normal
(non-interrupt) context, and then for NMI then IRQ then softirq. The final
check is redundant. Since the if branch is only hit if the context is one of
NMI, IRQ, or SOFTIRQ, if it's not NMI or IRQ there's no reason to check if
it is SOFTIRQ. The current code returns the same result even if its not a
SOFTIRQ. Which is confusing.
pc & SOFTIRQ_OFFSET ? 2 : RB_CTX_SOFTIRQ
Is redundant as RB_CTX_SOFTIRQ *is* 2!
Fixes: a0e3a18f4baf ("ring-buffer: Bring back context level recursive checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
