summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-28Merge tag 'stable/for-linus-3.14-rc8-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from David Vrabel: "Fix two bugs that cause x86 PV guest crashes. 1. Ballooning a 32-bit guest would eventually crash it. 2. Revert a broken fix for a regression with NUMA_BALACING. The bad fix caused PV guests to crash after migration. This is not ideal but unpicking the madness that is _PAGE_NUMA == _PAGE_PROTNONE will take a while longer" * tag 'stable/for-linus-3.14-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Revert "xen: properly account for _PAGE_NUMA during xen pte translations" xen/balloon: flush persistent kmaps in correct position
2014-03-28Input: edt-ft5x06 - add support for M09 firmware versionLothar Waßmann
There is a new firmware version for the EDT-FT5x06 chip. Add support for detecting the firmware version and handle the differences appropriately. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: edt-ft5x06 - ignore touchdown eventsLothar Waßmann
The chip may report invalid coordinates on touchdown events, so don't report the initial touchdown event. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: edt-ft5x06 - adjust delays to conform datasheetLothar Waßmann
The FT5x06 datasheet specifies a minimum reset width of 5ms and a delay between deassertion of reset and start of reporting of 300ms. Adjust the delays to conform to the datasheet. With the original delays I sometimes experienced communication timeouts when initializing the controller. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: edt-ft5x06 - add DT supportLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: edt-ft5x06 - several cleanups; no functional changeLothar Waßmann
- remove redundant parens - remove redundant type casts - fix mixed tab/space indentation Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: synaptics - add manual min/max quirk for ThinkPad X240Hans de Goede
This extends Benjamin Tissoires manual min/max quirk table with support for the ThinkPad X240. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: synaptics - add manual min/max quirkBenjamin Tissoires
The new Lenovo Haswell series (-40's) contains a new Synaptics touchpad. However, these new Synaptics devices report bad axis ranges. Under Windows, it is not a problem because the Windows driver uses RMI4 over SMBus to talk to the device. Under Linux, we are using the PS/2 fallback interface and it occurs the reported ranges are wrong. Of course, it would be too easy to have only one range for the whole series, each touchpad seems to be calibrated in a different way. We can not use SMBus to get the actual range because I suspect the firmware will switch into the SMBus mode and stop talking through PS/2 (this is the case for hybrid HID over I2C / PS/2 Synaptics touchpads). So as a temporary solution (until RMI4 land into upstream), start a new list of quirks with the min/max manually set. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> CC: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28of: Add support for ePAPR "stdout-path" propertyGrant Likely
ePAPR 1.1 defines the "stdout-path" property for specifying the console device, but Linux currently only handles the older "linux,stdout-path" property. This patch adds parsing for the new property name. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-03-28igb: fix race conditions on queuing skb for HW time stampJakub Kicinski
igb has a single set of TX time stamping resources per NIC. Use a simple bit lock to avoid race conditions and leaking skbs when multiple TX rings try to claim time stamping. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28igb: never generate both software and hardware timestampsJakub Kicinski
skb_tx_timestamp() does not report software time stamp if SKBTX_IN_PROGRESS is set. According to timestamping.txt software time stamps are a fallback and should not be generated if hardware time stamp is provided. Move call to skb_tx_timestamp() after setting SKBTX_IN_PROGRESS. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28e1000e: remove redundant if clause from PTP workJakub Kicinski
tx_hwtstamp_skb is always set before work is scheduled, work is cancelled before tx_hwtstamp_skb is set to NULL. PTP work cannot ever see tx_hwtstamp_skb set to NULL. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28e1000e: add timeout for TX HW time stamping workJakub Kicinski
Hardware may fail to report time stamp e.g.: - when hardware time stamping is not enabled - when time stamp is requested shortly after ifup Timeout time stamp reading work to prevent it from scheduling itself indefinitely. Report timeout events via system log and device stats. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40e: Use DEBUG_FD message level for an FD messageAnjali Singhai Jain
We don't need to print this info unless at FD message level. Change-ID: I329efdd8e754a0ea0669ec04d12e03db02e6b76e Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40e/i40evf: Add an FD message levelAnjali Singhai Jain
To use for Flow Director specific messages. Change-ID: I69e39a410aa2661f8fd1ed6af0126fa4c335cb77 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40e: check for netdev before debugfs useShannon Nelson
Make sure the VSI has a netdev before trying to use it in the debugfs netdev_ops commands. Change-ID: I2d744fc0c32b3226534ce2cde171d9675c5440a6 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40evf: remove double space after returnJesse Brandeburg
There were two spaces between return and the value, we only need one. Change-ID: Iaa42c33f50d8d149cdf1a4c9c1902295bfd991c4 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40e: Add functionality for FD SB to drop packetsAnjali Singhai Jain
With this change we can drop a flow if we wanted to. Change-ID: I222b1ae960e61a31965bafe3159a95099e70c7d2 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40e: Cleanup in FDIR SB ethtool codeAnjali Singhai Jain
Function add_del_fdir was used and implemented only for add. So change the name and drop a parameter. Change-ID: Icf2c6c3bbd4fd00cf8d9613a3f6d8c08e0f8e288 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40e: eeprom integrity check on load and emprShannon Nelson
The driver needs to verify the eeprom checksum and firmware crc status bits, and shutdown the driver if they fail. This code stops the processing of traffic, but doesn't kill the PF netdev so that the NVMUpdate process should still have a chance at fixing the image. The eeprom is checked on driver load and after an EMP reset, the latter of which should be generated after an NVMUpdate. Change-ID: I34deef21d2e16bf5a43c603cf8af27e6a29dc9d2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40e: Make the alloc and free queue vector calls orthogonalGreg Rose
It's annoying to search for a matching alloc and free set of function calls when they don't use the same framework for the name of the functions. Fix that up in the case of alloc and free of vsi queue vectors. i40e_vsi_free_q* i40e_vsi_alloc_q* Change-ID: I510eb863a0fbe405312bebea55c2846c76285e6d Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40evf: fix oops in watchdog handlerMitch Williams
The Tx watchdog handler runs in interrupt context, so it would cause an oops when sending an admin queue message to request a reset, because the admin queue functions use spinlocks. Instead, set a flag and let the reset task handle sending the request. Change-ID: I65879470b72963d9c308edfb8f45ac4fbba2c14f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40e: Delete ATR filter on RSTAnjali Singhai Jain
We currently delete ATR filter on FIN alone, delete on RST as well. Change-ID: Ie7cae5d1046b9d1d4a0d6ef5bdbf41224c3dade6 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28Merge remote-tracking branches 'regmap/topic/cache', 'regmap/topic/irq', ↵Mark Brown
'regmap/topic/lock', 'regmap/topic/mmio', 'regmap/topic/nodev', 'regmap/topic/parse-val' and 'regmap/topic/patch' into regmap-next
2014-03-28Merge remote-tracking branch 'regmap/topic/core' into regmap-nextMark Brown
2014-03-28Merge tag 'regmap-v3.14-rc4' into regmap-linusMark Brown
regmap: Fix for v3.14 One fix here, for syncing the last register in a cache block when the register map has a stride. This is a fairly unusual hardware configuration and the fact that it only affects the last register in a block makes the issue rarer still. # gpg: Signature made Sun 23 Feb 2014 04:36:37 GMT using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
2014-03-28spi: dw: Don't call kfree for memory allocated by devm_kzallocAxel Lin
With devm_kzalloc, the memory is automatically freed when spi_device detach from the bus. Fixes: commit 43f627ac9de42 (spi: dw: fix memory leak on error path) Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stabe@vger.kernel.org
2014-03-28spi: fsl-dspi: Fix memory leakAxel Lin
The memory allocated for chip is not freed anywhere. Convert to use devm_kzalloc to fix the memory leak. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-28iommu/vt-d: returning free pointer in get_domain_for_dev()Dan Carpenter
If we hit this error condition then we want to return a NULL pointer and not a freed variable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-03-28iommu/vt-d: Only call dmar_acpi_dev_scope_init() if DRHD units presentDavid Woodhouse
As pointed out by Jörg and fixed in commit 11f1a7768 ("iommu/vt-d: Check for NULL pointer in dmar_acpi_dev_scope_init(), this code path can bizarrely get exercised even on AMD IOMMU systems with IRQ remapping enabled. In addition to the defensive check for NULL which Jörg added, let's also just avoid calling the function at all if there aren't an Intel IOMMU units in the system. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-03-28regmap: mmio: Add regmap_mmio_regbits_check.Xiubo Li
Fix the support for 1/2/8 bytes wide register address checking. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-28Input: appletouch - dial back fuzz settingClinton Sprain
Let's dial back the default fuzz setting for most devices using this driver, based on values from user feedback from forums and bug reports. Signed-off-by: Clinton Sprain <clintonsprain@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: remove obsolete tnetv107x driversArnd Bergmann
The tnetv107x platform is getting removed, so the touchscreen and keypad drivers for this platform will no longer be needed either. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: sirfsoc-onkey - set the capability of reporting KEY_POWERXianglong Du
commit a1a7521064428fc1cf8 moved to report EV_KEY event(KEY_POWER) instead of reporting EV_PWR event(KEY_SUSPEND), but it didn't enable the capability, so the KEY_POWER will not be reported to userspace by input core. this patch fixes the issue. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28time: Revert to calling clock_was_set_delayed() while in irq contextJohn Stultz
In commit 47a1b796306356f35 ("tick/timekeeping: Call update_wall_time outside the jiffies lock"), we moved to calling clock_was_set() due to the fact that we were no longer holding the timekeeping or jiffies lock. However, there is still the problem that clock_was_set() triggers an IPI, which cannot be done from the timer's hard irq context, and will generate WARN_ON warnings. Apparently in my earlier testing, I'm guessing I didn't bump the dmesg log level, so I somehow missed the WARN_ONs. Thus we need to revert back to calling clock_was_set_delayed(). Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1395963049-11923-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-28Merge branch 'mdio_reset-next'David S. Miller
Florian Fainelli says: ==================== net: remove empty MDIO bus reset functions This patchset removes all empty MDIO bus reset functions that we have in the tree (hopefully all of them). This function is optional for the MDIO bus code in drivers/net/phy/mdio_bus.c::mdiobus_register, the documentation is updated to reflect that. Having less call sites to update will allow us to implement a generic BMCR_RESET based PHY reset for MDIO buses that require to reset their PHYs before their PHY detection succeeds (e.g: HiSilicon hip04 current submission) and provide it as a helper. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28Documentation: networking: phy.txt: MDIO bus reset is optionalFlorian Fainelli
Update the MDIO bus documentation to mention that the MDIO bus reset function is completely optional. It became optional with commit e13934563db0 ("[PATCH] PHY Layer fixup") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28bfin_mac: remove empty MDIO bus reset functionFlorian Fainelli
bfin_mdiobus_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28r6040: remove empty MDIO bus reset functionFlorian Fainelli
r6040_mdiobus_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28net: ftgmac100: remove empty MDIO bus reset functionFlorian Fainelli
ftgmac100_mdiobus_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28net: sun4i: remove empty MDIO bus reset functionFlorian Fainelli
sun4i_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28net: emaclite: remove empty MDIO bus reset functionFlorian Fainelli
xemaclite_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28net: mvmdio: remove empty MDIO bus reset functionFlorian Fainelli
orion_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28fs_enet: remove empty MDIO bus functionFlorian Fainelli
fs_enet_fec_mii_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28fec: remove empty MDIO bus functionFlorian Fainelli
fec_enet_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28net: ethoc: remove empty MDIO bus functionFlorian Fainelli
ethoc_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28dnet: remove empty MDIO bus reset functionFlorian Fainelli
dnet_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28macb: remove empty MDIO bus reset functionFlorian Fainelli
macb_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28tg3: remove empty MDIO bus reset functionFlorian Fainelli
tg3_mdio_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28net: greth: remove empty MDIO bus reset functionFlorian Fainelli
greth_mdio_reset() does nothing useful and this function is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 19:00:08 +0000