| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit c90f1178dcac30dee5ddd29ec0513e7589aa866e.
The assumption of "Each entry in formats[] table has unique mbus_code"
is valid for the RDI entities, but not for the PIX ones.
Reverting this patch and creating a new one which handles the PIX entities
correctly results in smaller and more straightforward patch than doing the
changes on top of the current version.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix 4 typos under drivers/media/platform/rockchip/rkisp1/ found by
checkpatch, including the RKISP1_CIF_MI_{M,S}P_PINGPONG_ENABLE macro
definitions.
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The VNCSI_IFMD_CSI_CHSEL_MASK is not used: remove it.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Since commit 29d750686331 ("media: fsl-viu: allow building it with
COMPILE_TEST") there were several attempts to fix build failures on
PPC, MICROBLAZE and M68K.
However, such errors are still present as reported by kbuild robot.
Fix the problem by using the ioread/write32be() accessors, which build
fine on all platforms.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This driver always operates on the DMA/IOVA addresses, so calling them
physical addresses is misleading, although when no IOMMU is used they
equal each other. Fix this by renaming all such entries to 'addr' and
adjusting comments.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If the device is powered off (for example during system suspend to ram)
the devices loses its configuration, especially the slave i2c mappings
and other configuration set at probe time. This renders the device
unusable and the only way to recover is to unbind and rebind the device
to the driver to run the probe setup again.
Add an early resume callback that reinitializes the device and setup the
slave i2c address mappings and other probe time configuration.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
It's not enough to set the CSI-2 virtual channel for TXA and TXB during
probe: it also needs to be set when the device is reset. Move the virtual
channel selection to adv748x_reset() that is called during probe and
when the device needs to be reset.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
It's not enough to select the AFE input port during probe: it also needs
to be set when the device is reset. Move the port selection to
adv748x_reset() that is called during probe and when the device needs to
be reset.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
During probe the i2c slave addresses are set two times in a row, once in
adv748x_initialise_clients() and once directly after in adv748x_reset().
Remove the call to adv748x_set_slave_addresses() in
adv748x_initialise_clients() as it's only called during probe while
adv748x_reset() is called during probe and normal operation.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The "a->index" value comes from the user via the ioctl. The problem is
that the shift can wrap resulting in setting "mxb->cur_audinput" to an
invalid value, which later results in an array overflow.
Fixes: 6680427791c9 ("[media] mxb: fix audio handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The meson vdec driver also supports Amlogic G12/SM1 hardware.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If an error happens in jpeg_get_drv_data(), i.e. match fails,
jpeg->variant field is NULL, so we cannot access it.
Consider device probe failed if jpeg->variant is NULL.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Baskov Evgeniy <baskov@ispras.ru>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
VP8 in Cedrus shares same engine as H264.
Note that it seems necessary to call bitstream parsing functions,
to parse frame header, otherwise decoded image is garbage. This is
contrary to what is driver supposed to do. However, values are not
really used, so this might be acceptable. It's possible that bitstream
parsing functions set some internal VPU state, which is later necessary
for proper decoding. Biggest suspect is "VP8 probs update" trigger.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use the new defines instead of hardcoding the VP8 lengths.
[hverkuil: add commit log]
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
These values will be used by various drivers implementing the VP8
stateless API.
This had been suggested by Ezequiel Garcia for the Cedrus VP8 driver.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
when IPI time out, dump VPU status to get more debug information
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
VPU should be in idle state before system is suspended
or it will work abnormally like VPU program counter not
in a correct address or VPU reset
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If of_graph_get_endpoint_by_regs() return NULL, it will return 0 rather
than an errno, because we doesn't initialize the return value.
Fixes: 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
V3s video engine runs at lower speed and support video decoder
for H.264 and JPEG/MJPEG only.
Signed-off-by: Martin Cerveny <m.cerveny@computer.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Allwinner V3s SoC contains video engine. Add compatible for it.
Signed-off-by: Martin Cerveny <m.cerveny@computer.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
All codecs should have capabilities.
For example "Allwinner V3s" does not support "MPEG2".
Signed-off-by: Martin Cerveny <m.cerveny@computer.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
On AMD Family 15h (Models 30h-3fh), I/O Memory Management Unit
RiSC engine sometimes stalls, requiring a reset.
As result, MythTV and w-scan won't scan channels on the AMD Kaveri
APU with the Hauppauge QuadHD TV tuner card.
For the solution I added the Input/Output Memory Management Unit's PCI
Identity of 0x1423 to the broken_dev_id[] array, which is used by
a quirks logic meant to fix similar problems with other AMD
chipsets.
Signed-off-by: Daniel Lee Kruse <daniel.lee.kruse@protonmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
These 'ops' structs are never modified, so make them const to allow the
compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Port from VCN2.5
SCRATCH2 is used to keep decode wptr as a workaround
which fix a hardware DPG decode wptr update bug for
vcn2.5 beforehand.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
|
|
Port from VCN2.5
Add vcn dpg harware synchronization to fix race condition
issue between vcn driver and hardware.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
|
|
[Why]
While booting into OS, driver updates DPP/DISP CLKs.
But init clock value is zero which is invalid.
[How]
Get current clocks value to update init clocks.
To avoid underflow.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix fan set speed calculation.
Suggested-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
drm-next
Again, nothing big this time. Mostly a new performance counter from
Christian, some more lockdep annotations from Guido and removal of
functionality that duplicates driver core from Robin.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/81367a99b8949584e5becd334ac001b9ad3dc37a.camel@pengutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.11-2
1. Add MT8167 support
2. Cleanup function
3. Convert the dpi bindings to yaml
4. Drop local dma_parms
5. Fix formatting and provide missing member description
6. Introduce GEM object functions
7. Fix aliases name
8. Move MIPI DSI phy driver to phy folder
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130234807.936-1-chunkuang.hu@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Add a new mode support for HDMI
- support for 1920x1200x60Hz mode.
Cleanups
- Drop in_bridge_node from exynos_dsi
- Use a exynos_dsi object instead of a encoder object as drvdata.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1606798227-31967-1-git-send-email-inki.dae@samsung.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 features for v5.11:
Highlights:
- Enable big joiner to join two pipes to one port to overcome pipe restrictions
(Manasi, Ville, Maarten)
Display:
- More DG1 enabling (Lucas, Aditya)
- Fixes to cases without display (Lucas, José, Jani)
- Initial PSR state improvements (José)
- JSL eDP vswing updates (Tejas)
- Handle EDID declared max 16 bpc (Ville)
- Display refactoring (Ville)
Other:
- GVT features
- Backmerge
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87czzzkk1s.fsf@intel.com
|
|
Currently it's impossible to delete files that use an unsupported
encryption policy, as the kernel will just return an error when
performing any operation on the top-level encrypted directory, even just
a path lookup into the directory or opening the directory for readdir.
More specifically, this occurs in any of the following cases:
- The encryption context has an unrecognized version number. Current
kernels know about v1 and v2, but there could be more versions in the
future.
- The encryption context has unrecognized encryption modes
(FSCRYPT_MODE_*) or flags (FSCRYPT_POLICY_FLAG_*), an unrecognized
combination of modes, or reserved bits set.
- The encryption key has been added and the encryption modes are
recognized but aren't available in the crypto API -- for example, a
directory is encrypted with FSCRYPT_MODE_ADIANTUM but the kernel
doesn't have CONFIG_CRYPTO_ADIANTUM enabled.
It's desirable to return errors for most operations on files that use an
unsupported encryption policy, but the current behavior is too strict.
We need to allow enough to delete files, so that people can't be stuck
with undeletable files when downgrading kernel versions. That includes
allowing directories to be listed and allowing dentries to be looked up.
Fix this by modifying the key setup logic to treat an unsupported
encryption policy in the same way as "key unavailable" in the cases that
are required for a recursive delete to work: preparing for a readdir or
a dentry lookup, revalidating a dentry, or checking whether an inode has
the same encryption policy as its parent directory.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Now that fscrypt_get_encryption_info() is only called from files in
fs/crypto/ (due to all key setup now being handled by higher-level
helper functions instead of directly by filesystems), unexport it and
move its declaration to fscrypt_private.h.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fscrypt_require_key() is now only used by files in fs/crypto/. So
reduce its visibility to fscrypt_private.h. This is also a prerequsite
for unexporting fscrypt_get_encryption_info().
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
In preparation for reducing the visibility of fscrypt_require_key() by
moving it to fscrypt_private.h, move the call to it from
fscrypt_prepare_setattr() to an out-of-line function.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The last remaining use of fscrypt_get_encryption_info() from filesystems
is for readdir (->iterate_shared()). Every other call is now in
fs/crypto/ as part of some other higher-level operation.
We need to add a new argument to fscrypt_get_encryption_info() to
indicate whether the encryption policy is allowed to be unrecognized or
not. Doing this is easier if we can work with high-level operations
rather than direct filesystem use of fscrypt_get_encryption_info().
So add a function fscrypt_prepare_readdir() which wraps the call to
fscrypt_get_encryption_info() for the readdir use case.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The call to fscrypt_get_encryption_info() in dx_show_leaf() is too low
in the call tree; fscrypt_get_encryption_info() should have already been
called when starting the directory operation. And indeed, it already
is. Moreover, the encryption key is guaranteed to already be available
because dx_show_leaf() is only called when adding a new directory entry.
And even if the key wasn't available, dx_show_leaf() uses
fscrypt_fname_disk_to_usr() which knows how to create a no-key name.
So for the above reasons, and because it would be desirable to stop
exporting fscrypt_get_encryption_info() directly to filesystems, remove
the call to fscrypt_get_encryption_info() from dx_show_leaf().
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Since encrypted directories can be opened and searched without their key
being available, and each readdir and ->lookup() tries to set up the
key, trying to set up the key in ->open() too isn't really useful.
Just remove it so that directories don't need an ->open() method
anymore, and so that we eliminate a use of fscrypt_get_encryption_info()
(which I'd like to stop exporting to filesystems).
Link: https://lore.kernel.org/r/20201203022041.230976-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Since encrypted directories can be opened and searched without their key
being available, and each readdir and ->lookup() tries to set up the
key, trying to set up the key in ->open() too isn't really useful.
Just remove it so that directories don't need an ->open() method
anymore, and so that we eliminate a use of fscrypt_get_encryption_info()
(which I'd like to stop exporting to filesystems).
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20201203022041.230976-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Since encrypted directories can be opened and searched without their key
being available, and each readdir and ->lookup() tries to set up the
key, trying to set up the key in ->open() too isn't really useful.
Just remove it so that directories don't need an ->open() method
anymore, and so that we eliminate a use of fscrypt_get_encryption_info()
(which I'd like to stop exporting to filesystems).
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201203022041.230976-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1606903122-2098-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 72b05b9940f0 ("pasemi_mac: RX/TX ring management cleanup")
Fixes: 8d636d8bc5ff ("pasemi_mac: jumbo frame support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1606903035-1838-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: b1fb1f280d09 ("cxgb3 - Fix dma mapping error path")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Raju Rangoju <rajur@chelsio.com>
Link: https://lore.kernel.org/r/1606902965-1646-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ssh://git.freedesktop.org/git/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.10-rc7
This is a set of small fixes for various issues found during the last
couple of weeks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127145324.125776-1-thierry.reding@gmail.com
|
|
The .x25_addr[] address comes from the user and is not necessarily
NUL terminated. This leads to a couple problems. The first problem is
that the strlen() in x25_bind() can read beyond the end of the buffer.
The second problem is more subtle and could result in memory corruption.
The call tree is:
x25_connect()
--> x25_write_internal()
--> x25_addr_aton()
The .x25_addr[] buffers are copied to the "addresses" buffer from
x25_write_internal() so it will lead to stack corruption.
Verify that the strings are NUL terminated and return -EINVAL if they
are not.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: a9288525d2ae ("X25: Dont let x25_bind use addresses containing characters")
Reported-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/X8ZeAKm8FnFpN//B@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"
* tag 'gfs2-v5.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix deadlock between gfs2_{create_inode,inode_lookup} and delete_work_func
gfs2: Upgrade shared glocks for atime updates
gfs2: Don't freeze the file system during unmount
gfs2: check for empty rgrp tree in gfs2_ri_update
gfs2: set lockdep subclass for iopen glocks
gfs2: Fix deadlock dumping resource group glocks
|
|
Prior to sanitizing the GGTT, the only operations allowed in
intel_display_init_nogem() are those to reserve the preallocated (and
active) regions in the GGTT leftover from the BIOS. Trying to allocate a
GGTT vma (such as intel_pin_and_fence_fb_obj during the initial modeset)
may then conflict with other preallocated regions that have not yet been
protected.
Move the initial modesetting from the end of init_nogem to the beginning
of init so that any vma pinning (either framebuffers or DSB, for example),
is after the GGTT is ready to handle it.
This will prevent the DSB object from being destroyed too early:
[ 53.449241] BUG: KASAN: use-after-free in i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.449309] Read of size 8 at addr ffff88811b1e8070 by task systemd-udevd/345
[ 53.449399] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G W 5.10.0-rc5+ #12
[ 53.449409] Call Trace:
[ 53.449418] dump_stack+0x9a/0xcc
[ 53.449558] ? i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.449565] print_address_description.constprop.0+0x3e/0x60
[ 53.449577] ? _raw_spin_lock_irqsave+0x4e/0x50
[ 53.449718] ? i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.449849] ? i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.449857] kasan_report.cold+0x1f/0x37
[ 53.449993] ? i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.450130] i915_init_ggtt+0x324/0x9e0 [i915]
[ 53.450273] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915]
[ 53.450281] ? static_obj+0x69/0x80
[ 53.450289] ? lockdep_init_map_waits+0xa9/0x310
[ 53.450431] ? intel_wopcm_init+0x96/0x3d0 [i915]
[ 53.450581] ? i915_gem_init+0x75/0x2d0 [i915]
[ 53.450720] i915_gem_init+0x75/0x2d0 [i915]
[ 53.450852] i915_driver_probe+0x8c2/0x1210 [i915]
[ 53.450993] ? i915_pm_prepare+0x630/0x630 [i915]
[ 53.451006] ? check_chain_key+0x1e7/0x2e0
[ 53.451025] ? __pm_runtime_resume+0x58/0xb0
[ 53.451157] i915_pci_probe+0xa6/0x2b0 [i915]
[ 53.451285] ? i915_pci_remove+0x40/0x40 [i915]
[ 53.451295] ? lockdep_hardirqs_on_prepare+0x124/0x230
[ 53.451302] ? _raw_spin_unlock_irqrestore+0x42/0x50
[ 53.451309] ? lockdep_hardirqs_on+0xbf/0x130
[ 53.451315] ? preempt_count_sub+0xf/0xb0
[ 53.451321] ? _raw_spin_unlock_irqrestore+0x2f/0x50
[ 53.451335] pci_device_probe+0xf9/0x190
[ 53.451350] really_probe+0x17f/0x5b0
[ 53.451365] driver_probe_device+0x13a/0x1c0
[ 53.451376] device_driver_attach+0x82/0x90
[ 53.451386] ? device_driver_attach+0x90/0x90
[ 53.451391] __driver_attach+0xab/0x190
[ 53.451401] ? device_driver_attach+0x90/0x90
[ 53.451407] bus_for_each_dev+0xe4/0x140
[ 53.451414] ? subsys_dev_iter_exit+0x10/0x10
[ 53.451423] ? __list_add_valid+0x2b/0xa0
[ 53.451440] bus_add_driver+0x227/0x2e0
[ 53.451454] driver_register+0xd3/0x150
[ 53.451585] i915_init+0x92/0xac [i915]
[ 53.451592] ? 0xffffffffa0a20000
[ 53.451598] do_one_initcall+0xb6/0x3b0
[ 53.451606] ? trace_event_raw_event_initcall_finish+0x150/0x150
[ 53.451614] ? __kasan_kmalloc.constprop.0+0xc2/0xd0
[ 53.451627] ? kmem_cache_alloc_trace+0x4a4/0x8e0
[ 53.451634] ? kasan_unpoison_shadow+0x33/0x40
[ 53.451649] do_init_module+0xf8/0x350
[ 53.451662] load_module+0x43de/0x47f0
[ 53.451716] ? module_frob_arch_sections+0x20/0x20
[ 53.451731] ? rw_verify_area+0x5f/0x130
[ 53.451780] ? __do_sys_finit_module+0x10d/0x1a0
[ 53.451785] __do_sys_finit_module+0x10d/0x1a0
[ 53.451792] ? __ia32_sys_init_module+0x40/0x40
[ 53.451800] ? seccomp_do_user_notification.isra.0+0x5c0/0x5c0
[ 53.451829] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 53.451835] ? mark_held_locks+0x24/0x90
[ 53.451856] do_syscall_64+0x33/0x80
[ 53.451863] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 53.451868] RIP: 0033:0x7fde09b4470d
[ 53.451875] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 53 f7 0c 00 f7 d8 64 89 01 48
[ 53.451880] RSP: 002b:00007ffd6abc1718 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 53.451890] RAX: ffffffffffffffda RBX: 000056444e528150 RCX: 00007fde09b4470d
[ 53.451895] RDX: 0000000000000000 RSI: 00007fde09a21ded RDI: 000000000000000f
[ 53.451899] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
[ 53.451904] R10: 000000000000000f R11: 0000000000000246 R12: 00007fde09a21ded
[ 53.451909] R13: 0000000000000000 R14: 000056444e329200 R15: 000056444e528150
[ 53.451957] Allocated by task 345:
[ 53.451995] kasan_save_stack+0x1b/0x40
[ 53.452001] __kasan_kmalloc.constprop.0+0xc2/0xd0
[ 53.452006] kmem_cache_alloc+0x1cd/0x8d0
[ 53.452146] i915_vma_instance+0x126/0xb70 [i915]
[ 53.452304] i915_gem_object_ggtt_pin_ww+0x222/0x3f0 [i915]
[ 53.452446] intel_dsb_prepare+0x14f/0x230 [i915]
[ 53.452588] intel_atomic_commit+0x183/0x690 [i915]
[ 53.452730] intel_initial_commit+0x2bc/0x2f0 [i915]
[ 53.452871] intel_modeset_init_nogem+0xa02/0x2af0 [i915]
[ 53.452995] i915_driver_probe+0x8af/0x1210 [i915]
[ 53.453120] i915_pci_probe+0xa6/0x2b0 [i915]
[ 53.453125] pci_device_probe+0xf9/0x190
[ 53.453131] really_probe+0x17f/0x5b0
[ 53.453136] driver_probe_device+0x13a/0x1c0
[ 53.453142] device_driver_attach+0x82/0x90
[ 53.453148] __driver_attach+0xab/0x190
[ 53.453153] bus_for_each_dev+0xe4/0x140
[ 53.453158] bus_add_driver+0x227/0x2e0
[ 53.453164] driver_register+0xd3/0x150
[ 53.453286] i915_init+0x92/0xac [i915]
[ 53.453292] do_one_initcall+0xb6/0x3b0
[ 53.453297] do_init_module+0xf8/0x350
[ 53.453302] load_module+0x43de/0x47f0
[ 53.453307] __do_sys_finit_module+0x10d/0x1a0
[ 53.453312] do_syscall_64+0x33/0x80
[ 53.453318] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 53.453345] Freed by task 82:
[ 53.453379] kasan_save_stack+0x1b/0x40
[ 53.453384] kasan_set_track+0x1c/0x30
[ 53.453389] kasan_set_free_info+0x1b/0x30
[ 53.453394] __kasan_slab_free+0x112/0x160
[ 53.453399] kmem_cache_free+0xb2/0x3f0
[ 53.453536] i915_gem_flush_free_objects+0x31a/0x3b0 [i915]
[ 53.453542] process_one_work+0x519/0x9f0
[ 53.453547] worker_thread+0x75/0x5c0
[ 53.453552] kthread+0x1da/0x230
[ 53.453557] ret_from_fork+0x22/0x30
[ 53.453584] The buggy address belongs to the object at ffff88811b1e8040
which belongs to the cache i915_vma of size 968
[ 53.453692] The buggy address is located 48 bytes inside of
968-byte region [ffff88811b1e8040, ffff88811b1e8408)
[ 53.453792] The buggy address belongs to the page:
[ 53.453842] page:00000000b35f7048 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88811b1ef940 pfn:0x11b1e8
[ 53.453847] head:00000000b35f7048 order:3 compound_mapcount:0 compound_pincount:0
[ 53.453853] flags: 0x8000000000010200(slab|head)
[ 53.453860] raw: 8000000000010200 ffff888115596248 ffff888115596248 ffff8881155b6340
[ 53.453866] raw: ffff88811b1ef940 0000000000170001 00000001ffffffff 0000000000000000
[ 53.453870] page dumped because: kasan: bad access detected
[ 53.453895] Memory state around the buggy address:
[ 53.453944] ffff88811b1e7f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 53.454011] ffff88811b1e7f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 53.454079] >ffff88811b1e8000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
[ 53.454146] ^
[ 53.454211] ffff88811b1e8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 53.454279] ffff88811b1e8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 53.454347] ==================================================================
[ 53.454414] Disabling lock debugging due to kernel taint
[ 53.454434] general protection fault, probably for non-canonical address 0xdead0000000000d0: 0000 [#1] PREEMPT SMP KASAN PTI
[ 53.454446] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G B W 5.10.0-rc5+ #12
[ 53.454592] RIP: 0010:i915_init_ggtt+0x26f/0x9e0 [i915]
[ 53.454602] Code: 89 8d 48 ff ff ff 4c 8d 60 d0 49 39 c7 0f 84 37 02 00 00 4c 89 b5 40 ff ff ff 4d 8d bc 24 90 00 00 00 4c 89 ff e8 c1 97 f8 e0 <49> 83 bc 24 90 00 00 00 00 0f 84 0f 02 00 00 49 8d 7c 24 08 e8 a8
[ 53.454618] RSP: 0018:ffff88812247f430 EFLAGS: 00010286
[ 53.454625] RAX: 0000000000000000 RBX: ffff888136440000 RCX: ffffffffa03fb78f
[ 53.454633] RDX: 0000000000000000 RSI: 0000000000000008 RDI: dead000000000160
[ 53.454641] RBP: ffff88812247f500 R08: ffffffff8113589f R09: 0000000000000000
[ 53.454648] R10: ffffffff83063843 R11: fffffbfff060c708 R12: dead0000000000d0
[ 53.454656] R13: ffff888136449ba0 R14: 0000000000002000 R15: dead000000000160
[ 53.454664] FS: 00007fde095c4880(0000) GS:ffff88840c880000(0000) knlGS:0000000000000000
[ 53.454672] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 53.454679] CR2: 00007fef132b4f28 CR3: 000000012245c002 CR4: 00000000003706e0
[ 53.454686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 53.454693] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 53.454700] Call Trace:
[ 53.454833] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915]
Reported-by: Matthew Auld <matthew.auld@intel.com>
Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125193032.29282-1-chris@chris-wilson.co.uk
(cherry picked from commit b3bf99daaee96a141536ce5c60a0d6dba6ec1d23)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
!HAS_DISPLAY() implies !HAS_OVERLAY(), skipping overlay setup anyway, so
return earlier from intel_modeset_init() for clarity.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-4-lucas.demarchi@intel.com
(cherry picked from commit 71c8415d0daa78ef1295743d0e11ba0214d0a9b9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
