summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-02drm/i915/gt: Limit frequency drop to RPe on parkingChris Wilson
We treat idling the GT (intel_rps_park) as a downclock event, and reduce the frequency we intend to restart the GT with. Since the two workloads are likely related (e.g. a compositor rendering every 16ms), we want to carry the frequency and load information from across the idling. However, we do also need to update the frequencies so that workloads that run for less than 1ms are autotuned by RPS (otherwise we leave compositors running at max clocks, draining excess power). Conversely, if we try to run too slowly, the next workload has to run longer. Since there is a hysteresis in the power graph, below a certain frequency running a short workload for longer consumes more energy than running it slightly higher for less time. The exact balance point is unknown beforehand, but measurements with 30fps media playback indicate that RPe is a better choice. Reported-by: Edward Baker <edward.baker@intel.com> Tested-by: Edward Baker <edward.baker@intel.com> Fixes: 043cd2d14ede ("drm/i915/gt: Leave rps->cur_freq on unpark") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Edward Baker <edward.baker@intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201124183521.28623-1-chris@chris-wilson.co.uk (cherry picked from commit f7ed83cc1925f0b8ce2515044d674354035c3af9) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-02drm/i915/gt: Retain default context state across shrinkingVenkata Ramana Nayana
As we use a shmemfs file to hold the context state, when not in use it may be swapped out, such as across suspend. Since we wrote into the shmemfs without marking the pages as dirty, the contents may be dropped instead of being written back to swap. On re-using the shmemfs file, such as creating a new context after resume, the contents of that file were likely garbage and so the new context could then hang the GPU. Simply mark the page as being written when copying into the shmemfs file, and it the new contents will be retained across swapout. Fixes: be1cb55a07bf ("drm/i915/gt: Keep a no-frills swappable copy of the default context state") Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: CQ Tang <cq.tang@intel.com> Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.8+ Link: https://patchwork.freedesktop.org/patch/msgid/20201127120718.454037-161-matthew.auld@intel.com (cherry picked from commit a9d71f76ccfd309f3bd5f7c9b60e91a4decae792) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-02drm/i915/gt: Split the breadcrumb spinlock between global and contextsChris Wilson
As we funnel more and more contexts into the breadcrumbs on an engine, the hold time of b->irq_lock grows. As we may then contend with the b->irq_lock during request submission, this increases the burden upon the engine->active.lock and so directly impacts both our execution latency and client latency. If we split the b->irq_lock by introducing a per-context spinlock to manage the signalers within a context, we then only need the b->irq_lock for enabling/disabling the interrupt and can avoid taking the lock for walking the list of contexts within the signal worker. Even with the current setup, this greatly reduces the number of times we have to take and fight for b->irq_lock. Furthermore, this closes the race between enabling the signaling context while it is in the process of being signaled and removed: <4>[ 416.208555] list_add corruption. prev->next should be next (ffff8881951d5910), but was dead000000000100. (prev=ffff8882781bb870). <4>[ 416.208573] WARNING: CPU: 7 PID: 0 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 <4>[ 416.208575] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp ax88179_178a usbnet mii crct10dif_pclmul snd_intel_dspcfg crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core e1000e snd_pcm ptp pps_core mei_me mei prime_numbers intel_lpss_pci [last unloaded: i915] <4>[ 416.208611] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G U 5.8.0-CI-CI_DRM_8852+ #1 <4>[ 416.208614] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3212.A00.1905212112 05/21/2019 <4>[ 416.208627] RIP: 0010:__list_add_valid+0x4d/0x70 <4>[ 416.208631] Code: c3 48 89 d1 48 c7 c7 60 18 33 82 48 89 c2 e8 ea e0 b6 ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 b0 18 33 82 e8 d3 e0 b6 ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 00 19 33 82 e8 <4>[ 416.208633] RSP: 0018:ffffc90000280e18 EFLAGS: 00010086 <4>[ 416.208636] RAX: 0000000000000000 RBX: ffff888250a44880 RCX: 0000000000000105 <4>[ 416.208639] RDX: 0000000000000105 RSI: ffffffff82320c5b RDI: 00000000ffffffff <4>[ 416.208641] RBP: ffff8882781bb870 R08: 0000000000000000 R09: 0000000000000001 <4>[ 416.208643] R10: 00000000054d2957 R11: 000000006abbd991 R12: ffff8881951d58c8 <4>[ 416.208646] R13: ffff888286073880 R14: ffff888286073848 R15: ffff8881951d5910 <4>[ 416.208669] FS: 0000000000000000(0000) GS:ffff88829c180000(0000) knlGS:0000000000000000 <4>[ 416.208671] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 416.208673] CR2: 0000556231326c48 CR3: 0000000005610001 CR4: 0000000000760ee0 <4>[ 416.208675] PKRU: 55555554 <4>[ 416.208677] Call Trace: <4>[ 416.208679] <IRQ> <4>[ 416.208751] i915_request_enable_breadcrumb+0x278/0x400 [i915] <4>[ 416.208839] __i915_request_submit+0xca/0x2a0 [i915] <4>[ 416.208892] __execlists_submission_tasklet+0x480/0x1830 [i915] <4>[ 416.208942] execlists_submission_tasklet+0xc4/0x130 [i915] <4>[ 416.208947] tasklet_action_common.isra.17+0x6c/0x1c0 <4>[ 416.208954] __do_softirq+0xdf/0x498 <4>[ 416.208960] ? handle_fasteoi_irq+0x150/0x150 <4>[ 416.208964] asm_call_on_stack+0xf/0x20 <4>[ 416.208966] </IRQ> <4>[ 416.208969] do_softirq_own_stack+0xa1/0xc0 <4>[ 416.208972] irq_exit_rcu+0xb5/0xc0 <4>[ 416.208976] common_interrupt+0xf7/0x260 <4>[ 416.208980] asm_common_interrupt+0x1e/0x40 <4>[ 416.208985] RIP: 0010:cpuidle_enter_state+0xb6/0x410 <4>[ 416.208987] Code: 00 31 ff e8 9c 3e 89 ff 80 7c 24 0b 00 74 12 9c 58 f6 c4 02 0f 85 31 03 00 00 31 ff e8 e3 6c 90 ff e8 fe a4 94 ff fb 45 85 ed <0f> 88 c7 02 00 00 49 63 c5 4c 2b 24 24 48 8d 14 40 48 8d 14 90 48 <4>[ 416.208989] RSP: 0018:ffffc90000143e70 EFLAGS: 00000206 <4>[ 416.208991] RAX: 0000000000000007 RBX: ffffe8ffffda8070 RCX: 0000000000000000 <4>[ 416.208993] RDX: 0000000000000000 RSI: ffffffff8238b4ee RDI: ffffffff8233184f <4>[ 416.208995] RBP: ffffffff826b4e00 R08: 0000000000000000 R09: 0000000000000000 <4>[ 416.208997] R10: 0000000000000001 R11: 0000000000000000 R12: 00000060e7f24a8f <4>[ 416.208998] R13: 0000000000000003 R14: 0000000000000003 R15: 0000000000000003 <4>[ 416.209012] cpuidle_enter+0x24/0x40 <4>[ 416.209016] do_idle+0x22f/0x2d0 <4>[ 416.209022] cpu_startup_entry+0x14/0x20 <4>[ 416.209025] start_secondary+0x158/0x1a0 <4>[ 416.209030] secondary_startup_64+0xa4/0xb0 <4>[ 416.209039] irq event stamp: 10186977 <4>[ 416.209042] hardirqs last enabled at (10186976): [<ffffffff810b9363>] tasklet_action_common.isra.17+0xe3/0x1c0 <4>[ 416.209044] hardirqs last disabled at (10186977): [<ffffffff81a5e5ed>] _raw_spin_lock_irqsave+0xd/0x50 <4>[ 416.209047] softirqs last enabled at (10186968): [<ffffffff810b9a1a>] irq_enter_rcu+0x6a/0x70 <4>[ 416.209049] softirqs last disabled at (10186969): [<ffffffff81c00f4f>] asm_call_on_stack+0xf/0x20 <4>[ 416.209317] list_del corruption, ffff8882781bb870->next is LIST_POISON1 (dead000000000100) <4>[ 416.209317] WARNING: CPU: 7 PID: 46 at lib/list_debug.c:47 __list_del_entry_valid+0x4e/0x90 <4>[ 416.209317] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp ax88179_178a usbnet mii crct10dif_pclmul snd_intel_dspcfg crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core e1000e snd_pcm ptp pps_core mei_me mei prime_numbers intel_lpss_pci [last unloaded: i915] <4>[ 416.209317] CPU: 7 PID: 46 Comm: ksoftirqd/7 Tainted: G U W 5.8.0-CI-CI_DRM_8852+ #1 <4>[ 416.209317] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3212.A00.1905212112 05/21/2019 <4>[ 416.209317] RIP: 0010:__list_del_entry_valid+0x4e/0x90 <4>[ 416.209317] Code: 2e 48 8b 32 48 39 fe 75 3a 48 8b 50 08 48 39 f2 75 48 b8 01 00 00 00 c3 48 89 fe 48 89 c2 48 c7 c7 38 19 33 82 e8 62 e0 b6 ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 19 33 82 e8 4e e0 b6 ff 0f 0b <4>[ 416.209317] RSP: 0018:ffffc90000280de8 EFLAGS: 00010086 <4>[ 416.209317] RAX: 0000000000000000 RBX: ffff8882781bb848 RCX: 0000000000010104 <4>[ 416.209317] RDX: 0000000000010104 RSI: ffffffff8238b4ee RDI: 00000000ffffffff <4>[ 416.209317] RBP: ffff8882781bb880 R08: 0000000000000000 R09: 0000000000000001 <4>[ 416.209317] R10: 000000009fb6666e R11: 00000000feca9427 R12: ffffc90000280e18 <4>[ 416.209317] R13: ffff8881951d5930 R14: dead0000000000d8 R15: ffff8882781bb880 <4>[ 416.209317] FS: 0000000000000000(0000) GS:ffff88829c180000(0000) knlGS:0000000000000000 <4>[ 416.209317] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 416.209317] CR2: 0000556231326c48 CR3: 0000000005610001 CR4: 0000000000760ee0 <4>[ 416.209317] PKRU: 55555554 <4>[ 416.209317] Call Trace: <4>[ 416.209317] <IRQ> <4>[ 416.209317] remove_signaling_context.isra.13+0xd/0x70 [i915] <4>[ 416.209513] signal_irq_work+0x1f7/0x4b0 [i915] This is caused by virtual engines where although we take the breadcrumb lock on each of the active engines, they may be different engines on different requests, It turns out that the b->irq_lock was not a sufficient proxy for the engine->active.lock in the case of more than one request, so introduce an explicit lock around ce->signals. v2: ce->signal_lock is acquired with only RCU protection and so must be treated carefully and not cleared during reallocation. We also then need to confirm that the ce we lock is the same as we found in the breadcrumb list. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2276 Fixes: c18636f76344 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs") Fixes: 2854d866327a ("drm/i915/gt: Replace intel_engine_transfer_stale_breadcrumbs") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-4-chris@chris-wilson.co.uk (cherry picked from commit c744d50363b714783bbc88d986cc16def13710f7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-02drm/i915/gt: Protect context lifetime with RCUChris Wilson
Allow a brief period for continued access to a dead intel_context by deferring the release of the struct until after an RCU grace period. As we are using a dedicated slab cache for the contexts, we can defer the release of the slab pages via RCU, with the caveat that individual structs may be reused from the freelist within an RCU grace period. To handle that, we have to avoid clearing members of the zombie struct. This is required for a later patch to handle locking around virtual requests in the signaler, as those requests may want to move between engines and be destroyed while we are holding b->irq_lock on a physical engine. v2: Drop mutex_reinit(), if we never mark the mutex as destroyed we don't need to reset the debug code, at the loss of having the mutex debug code spot us attempting to destroy a locked mutex. v3: As the intended use will remain strongly referenced counted, with very little inflight access across reuse, drop the ctor. v4: Drop the unrequired change to remove the temporary reference around dropping the active context, and add back some more missing ctor operations. v5: The ctor is back. Tvrtko spotted that ce->signal_lock [introduced later] maybe accessed under RCU and so needs special care not to be reinitialised. v6: Don't mix SLAB_TYPESAFE_BY_RCU and RCU list iteration. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-3-chris@chris-wilson.co.uk (cherry picked from commit 14d1eaf08845c534963c83f754afe0cb14cb2512) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-03xsk: Change the tx writeable conditionXuan Zhuo
Modify the tx writeable condition from the queue is not full to the number of present tx queues is less than the half of the total number of queues. Because the tx queue not full is a very short time, this will cause a large number of EPOLLOUT events, and cause a large number of process wake up. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/508fef55188d4e1160747ead64c6dcda36735880.1606555939.git.xuanzhuo@linux.alibaba.com
2020-12-03xsk: Replace datagram_poll by sock_poll_waitXuan Zhuo
datagram_poll will judge the current socket status (EPOLLIN, EPOLLOUT) based on the traditional socket information (eg: sk_wmem_alloc), but this does not apply to xsk. So this patch uses sock_poll_wait instead of datagram_poll, and the mask is calculated by xsk_poll. Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/e82f4697438cd63edbf271ebe1918db8261b7c09.1606555939.git.xuanzhuo@linux.alibaba.com
2020-12-02drm/amd/display: add cursor pitch checkSimon Ser
Replace the width check with a pitch check, which matches DM internals. Add a new check to make sure the pitch (in pixels) matches the width. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amd/display: use FB pitch to fill dc_cursor_attributesSimon Ser
Instead of relying on pitch (in pixels) == width, use the FB pitch. This is less confusing to readers, and works correctly if we ever support FBs with a pitch (in pixels) != width. This also makes the code symmetrical with fill_plane_buffer_attributes. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amd/display: add debug logs for dm_crtc_helper_atomic_checkSimon Ser
Instead of silently failing the atomic check, explain what happened via a debug log. This makes it easier for user-space to figure out why something failed. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/renoir: simplify sensor handling (v2)Alex Deucher
Just query the metrics table directly rather than going through an extra level of functions. v2: use proper enum Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/vangogh: use metrics table for voltages (v2)Alex Deucher
Fixes voltage reading for vddgfx and adds support for vddsoc. v2: use new voltage enum Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/vangogh: simplify sensor handlingAlex Deucher
Just query the metrics table directly rather than going through an extra level of functions. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu: add metrics enums for voltageAlex Deucher
To be used in subsequent patches. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/sienna_cichlid: simplify sensor handlingAlex Deucher
Just query the metrics table directly rather than going through an extra level of functions. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/arcturus: simplify sensor handlingAlex Deucher
Just query the metrics table directly rather than going through an extra level of functions. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/navi1x: simplify sensor handlingAlex Deucher
Just query the metrics table directly rather than going through an extra level of functions. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/powerplay/psm: return an error in power state initAlex Deucher
Rather than just silently dropping it. Also fixes a set but unused variable warning. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/powerplay/vega10: handle error in getting pptableAlex Deucher
Rather than just silently dropping it. Also fixes a set but unused variable warning. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/powerplay/iceland: return an error if copying to smc failsAlex Deucher
Rather than just silently dropping it. Also fixes a set but unused variable warning. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/powerplay/ci: return an error if copying to smc failsAlex Deucher
Rather than just silently dropping it. Also fixes a set but unused variable warning. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/powerplay/tonga: return an error if copying to smc failsAlex Deucher
Rather than just silently dropping it. Also fixes a set but unused variable warning. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/vcn3.0: remove old DPG workaroundBoyuan Zhang
Port from VCN2.5 SCRATCH2 is used to keep decode wptr as a workaround which fix a hardware DPG decode wptr update bug for vcn2.5 beforehand. Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/vcn3.0: stall DPG when WPTR/RPTR resetBoyuan Zhang
Port from VCN2.5 Add vcn dpg harware synchronization to fix race condition issue between vcn driver and hardware. Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02i2c: imx: Don't generate STOP condition if arbitration has been lostChristian Eggers
If arbitration is lost, the master automatically changes to slave mode. I2SR_IBB may or may not be reset by hardware. Raising a STOP condition by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB. So calling i2c_imx_bus_busy() is not required and would busy-wait until timeout. Signed-off-by: Christian Eggers <ceggers@arri.de> Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org # Requires trivial backporting, simple remove # the 3rd argument from the calls to # i2c_imx_bus_busy(). Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: imx: Check for I2SR_IAL after every byteChristian Eggers
Arbitration Lost (IAL) can happen after every single byte transfer. If arbitration is lost, the I2C hardware will autonomously switch from master mode to slave. If a transfer is not aborted in this state, consecutive transfers will not be executed by the hardware and will timeout. Signed-off-by: Christian Eggers <ceggers@arri.de> Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: imx: Fix reset of I2SR_IAL flagChristian Eggers
According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers <ceggers@arri.de> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I'm sad to say that we've got an unusually large arm64 fixes pull for rc7 which addresses numerous significant instrumentation issues with our entry code. Without these patches, lockdep is hopelessly unreliable in some configurations [1,2] and syzkaller is therefore not a lot of use because it's so noisy. Although much of this has always been broken, it appears to have been exposed more readily by other changes such as 044d0d6de9f5 ("lockdep: Only trace IRQ edges") and general lockdep improvements around IRQ tracing and NMIs. Fixing this properly required moving much of the instrumentation hooks from our entry assembly into C, which Mark has been working on for the last few weeks. We're not quite ready to move to the recently added generic functions yet, but the code here has been deliberately written to mimic that closely so we can look at cleaning things up once we have a bit more breathing room. Having said all that, the second version of these patches was posted last week and I pushed it into our CI (kernelci and cki) along with a commit which forced on PROVE_LOCKING, NOHZ_FULL and CONTEXT_TRACKING_FORCE. The result? We found a real bug in the md/raid10 code [3]. Oh, and there's also a really silly typo patch that's unrelated. Summary: - Fix numerous issues with instrumentation and exception entry - Fix hideous typo in unused register field definition" [1] https://lore.kernel.org/r/CACT4Y+aAzoJ48Mh1wNYD17pJqyEcDnrxGfApir=-j171TnQXhw@mail.gmail.com [2] https://lore.kernel.org/r/20201119193819.GA2601289@elver.google.com [3] https://lore.kernel.org/r/94c76d5e-466a-bc5f-e6c2-a11b65c39f83@redhat.com * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mte: Fix typo in macro definition arm64: entry: fix EL1 debug transitions arm64: entry: fix NMI {user, kernel}->kernel transitions arm64: entry: fix non-NMI kernel<->kernel transitions arm64: ptrace: prepare for EL1 irq/rcu tracking arm64: entry: fix non-NMI user<->kernel transitions arm64: entry: move el1 irq/nmi logic to C arm64: entry: prepare ret_to_user for function call arm64: entry: move enter_from_user_mode to entry-common.c arm64: entry: mark entry code as noinstr arm64: mark idle code as noinstr arm64: syscall: exit userspace before unmasking exceptions
2020-12-02Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull vdpa fixes from Michael Tsirkin: "A couple of fixes that surfaced at the last minute" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost_vdpa: return -EFAULT if copy_to_user() fails vdpa: mlx5: fix vdpa/vhost dependencies
2020-12-02Merge tag 'sound-5.10-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are the pending sound fixes for 5.10: all small device-specific fixes, and nothing particular stands out, so far" * tag 'sound-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Add mute LED quirk to yet another HP x360 model ALSA: hda/realtek: Fix bass speaker DAC assignment on Asus Zephyrus G14 ALSA: hda/generic: Add option to enforce preferred_dacs pairs ALSA: usb-audio: US16x08: fix value count for level meters ALSA: hda/realtek - Add new codec supported for ALC897 ASoC: rt5682: change SAR voltage threshold ASoC: wm_adsp: fix error return code in wm_adsp_load() ALSA: hda/realtek: Enable headset of ASUS UX482EG & B9400CEA with ALC294 ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state ALSA: hda/realtek - Fixed Dell AIO wrong sound tone ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks
2020-12-02Merge tag 'trace-v5.10-rc6-bootconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull bootconfig fixes from Steven Rostedt: "Have bootconfig size and checksum be little endian In case the bootconfig is created on one kind of endian machine, and then read on the other kind of endian kernel, the size and checksum will be incorrect. Instead, have both the size and checksum always be little endian and have the tool and the kernel convert it from little endian to or from the host endian" * tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: docs: bootconfig: Add the endianness of fields tools/bootconfig: Store size and checksum in footer as le32 bootconfig: Load size and checksum in the footer as le32
2020-12-02dpaa_eth: copy timestamp fields to new skb in A-050385 workaroundYangbo Lu
The timestamp fields should be copied to new skb too in A-050385 workaround for later TX timestamping handling. Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Link: https://lore.kernel.org/r/20201201075258.1875-1-yangbo.lu@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02net: ip6_gre: set dev->hard_header_len when using header_opsAntoine Tenart
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I could reproduce it creating an NBMA ip6gre interface and forwarding traffic to it: skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:109! Call Trace: skb_push+0x10/0x10 ip6gre_header+0x47/0x1b0 neigh_connected_output+0xae/0xf0 ip6gre tunnel provides its own header_ops->create, and sets it conditionally when initializing the tunnel in NBMA mode. When header_ops->create is used, dev->hard_header_len should reflect the length of the header created. Otherwise, when not used, dev->needed_headroom should be used. Fixes: eb95f52fc72d ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap") Cc: Maria Pasechnik <mariap@mellanox.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02mt76: usb: fix crash on device removalStanislaw Gruszka
Currently 'while (q->queued > 0)' loop was removed from mt76u_stop_tx() code. This causes crash on device removal as we try to cleanup empty queue: [ 96.495571] kernel BUG at include/linux/skbuff.h:2297! [ 96.498983] invalid opcode: 0000 [#1] SMP PTI [ 96.501162] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.10.0-rc5+ #11 [ 96.502754] Hardware name: LENOVO 20DGS08H00/20DGS08H00, BIOS J5ET48WW (1.19 ) 08/27/2015 [ 96.504378] Workqueue: usb_hub_wq hub_event [ 96.505983] RIP: 0010:skb_pull+0x2d/0x30 [ 96.507576] Code: 00 00 8b 47 70 39 c6 77 1e 29 f0 89 47 70 3b 47 74 72 17 48 8b 87 c8 00 00 00 89 f6 48 01 f0 48 89 87 c8 00 00 00 c3 31 c0 c3 <0f> 0b 90 0f 1f 44 00 00 53 48 89 fb 48 8b bf c8 00 00 00 8b 43 70 [ 96.509296] RSP: 0018:ffffb11b801639b8 EFLAGS: 00010287 [ 96.511038] RAX: 000000001c6939ed RBX: ffffb11b801639f8 RCX: 0000000000000000 [ 96.512964] RDX: ffffb11b801639f8 RSI: 0000000000000018 RDI: ffff90c64e4fb800 [ 96.514710] RBP: ffff90c654551ee0 R08: ffff90c652bce7a8 R09: ffffb11b80163728 [ 96.516450] R10: 0000000000000001 R11: 0000000000000001 R12: ffff90c64e4fb800 [ 96.519749] R13: 0000000000000010 R14: 0000000000000020 R15: ffff90c64e352ce8 [ 96.523455] FS: 0000000000000000(0000) GS:ffff90c96eec0000(0000) knlGS:0000000000000000 [ 96.527171] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 96.530900] CR2: 0000242556f18288 CR3: 0000000146a10002 CR4: 00000000003706e0 [ 96.534678] Call Trace: [ 96.538418] mt76x02u_tx_complete_skb+0x1f/0x50 [mt76x02_usb] [ 96.542231] mt76_queue_tx_complete+0x23/0x50 [mt76] [ 96.546028] mt76u_stop_tx.cold+0x71/0xa2 [mt76_usb] [ 96.549797] mt76x0u_stop+0x2f/0x90 [mt76x0u] [ 96.553638] drv_stop+0x33/0xd0 [mac80211] [ 96.557449] ieee80211_do_stop+0x558/0x860 [mac80211] [ 96.561262] ? dev_deactivate_many+0x298/0x2d0 [ 96.565101] ieee80211_stop+0x16/0x20 [mac80211] Fix that by adding while loop again. We need loop, not just single check, to clean all pending entries. Additionally move mt76_worker_disable/enable after !mt76_has_tx_pending() as we want to tx_worker to run to process tx queues, while we wait for exactly that. I was a bit worried about accessing q->queued without lock, but mt76_worker_disable() -> kthread_park() should assure this value will be seen updated on other cpus. Fixes: fe5b5ab52e9d ("mt76: unify queue tx cleanup code") Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201126125520.72912-1-stf_xl@wp.pl
2020-12-02iwlwifi: pcie: add some missing entries for AX210Golan Ben Ami
Some subsytem device IDs were missing from the list, so some AX210 devices were not recognized. Add them. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201202143859.a06ba7540449.I7390305d088a49c1043c9b489154fe057989c18f@changeid Link: https://lore.kernel.org/r/20201121003411.9450-1-ikegami.t@gmail.com
2020-12-02iwlwifi: pcie: invert values of NO_160 device config entriesLuca Coelho
The NO_160 flag specifies if the device doesn't have 160 MHz support, but we errorneously assumed the opposite. If the flag was set, we were considering that 160 MHz was supported, but it's actually the opposite. Fix it by inverting the bits, i.e. NO_160 is 0x1 and 160 is 0x0. Fixes: d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201202143859.375bec857ccb.I83884286b688965293e9810381808039bd7eedae@changeid
2020-12-02iwlwifi: pcie: add one missing entry for AX210Luca Coelho
The 0x0024 subsytem device ID was missing from the list, so some AX210 devices were not recognized. Add it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201202143859.308eab4db42c.I3763196cd3f7bb36f3dcabf02ec4e7c4fe859c0f@changeid
2020-12-02iwlwifi: update MAINTAINERS entryJohannes Berg
Reflect the fact that the linuxwifi@intel.com address will disappear, and that neither Emmanuel nor myself are really much involved with the maintenance these days. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20201129151117.a25afe6d2c7f.I8f13a5689dd353825fb2b9bd5b6f0fbce92cb12b@changeid
2020-12-02scsi: bnx2i: Requires MMURandy Dunlap
The SCSI_BNX2_ISCSI kconfig symbol selects CNIC and CNIC selects UIO, which depends on MMU. Since 'select' does not follow dependency chains, add the same MMU dependency to SCSI_BNX2_ISCSI. Quietens this kconfig warning: WARNING: unmet direct dependencies detected for CNIC Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) && MMU [=n] Selected by [m]: - SCSI_BNX2_ISCSI [=m] && SCSI_LOWLEVEL [=y] && SCSI [=y] && NET [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) Link: https://lore.kernel.org/r/20201129070916.3919-1-rdunlap@infradead.org Fixes: cf4e6363859d ("[SCSI] bnx2i: Add bnx2i iSCSI driver.") Cc: linux-scsi@vger.kernel.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-02s390: fix irq state tracingHeiko Carstens
With commit 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing") common code calls arch_cpu_idle() with a lockdep state that tells irqs are on. This doesn't work very well for s390: psw_idle() will enable interrupts to wait for an interrupt. As soon as an interrupt occurs the interrupt handler will verify if the old context was psw_idle(). If that is the case the interrupt enablement bits in the old program status word will be cleared. A subsequent test in both the external as well as the io interrupt handler checks if in the old context interrupts were enabled. Due to the above patching of the old program status word it is assumed the old context had interrupts disabled, and therefore a call to TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in turn makes lockdep incorrectly "think" that interrupts are enabled within the interrupt handler. Fix this by unconditionally calling TRACE_IRQS_OFF when entering interrupt handlers. Also call unconditionally TRACE_IRQS_ON when leaving interrupts handlers. This leaves the special psw_idle() case, which now returns with interrupts disabled, but has an "irqs on" lockdep state. So callers of psw_idle() must adjust the state on their own, if required. This is currently only __udelay_disabled(). Fixes: 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing") Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/pci: fix CPU address in MSI for directed IRQAlexander Gordeev
The directed MSIs are delivered to CPUs whose address is written to the MSI message address. The current code assumes that a CPU logical number (as it is seen by the kernel) is also the CPU address. The above assumption is not correct, as the CPU address is rather the value returned by STAP instruction. That value does not necessarily match the kernel logical CPU number. Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02i2c: qcom: Fix IRQ error misassignementRobert Foss
During cci_isr() errors read from register fields belonging to i2c master1 are currently assigned to the status field belonging to i2c master0. This patch corrects this error, and always assigns master1 errors to the status field of master1. Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Reported-by: Loic Poulain <loic.poulain@linaro.org> Suggested-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc()Zhihao Cheng
Fix to return the error code from qup_i2c_change_state() instaed of 0 in qup_i2c_bam_schedule_desc(). Fixes: fbf9921f8b35d9b2 ("i2c: qup: Fix error handling") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-12-02media: i2c: imx219: Selection compliance fixesHans Verkuil
To comply with the intended usage of the V4L2 selection target when used to retrieve a sensor image properties, adjust the rectangles returned by the imx219 driver. The top/left crop coordinates of the TGT_CROP rectangle were set to (0, 0) instead of (8, 8) which is the offset from the larger physical pixel array rectangle. This was also a mismatch with the default values crop rectangle value, so this is corrected. Found with v4l2-compliance. While at it, add V4L2_SEL_TGT_CROP_BOUNDS support: CROP_DEFAULT and CROP_BOUNDS have the same size as the non-active pixels are not readable using the selection API. Found with v4l2-compliance. [reword commit message, use macros for pixel offsets] Fixes: e6d4ef7d58aa7 ("media: i2c: imx219: Implement get_selection") Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: dt-bindings: media: Use OF graph schemaRob Herring
Now that we have a graph schema, rework the media related schemas to use it. Mostly this is adding a reference to graph.yaml and dropping duplicate parts from schemas. Cc: Maxime Ripard <mripard@kernel.org> Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: rdacm20: Enable GPIO1 explicitlyJacopo Mondi
The MAX9271 GPIO1 line that controls the sensor reset is by default enabled after a serializer chip reset. As rdacm20 does not go through an explicit serializer reset, make sure GPIO1 is enabled to make the camera module driver more robust. Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver") Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: max9271: Fix GPIO enable/disableJacopo Mondi
Fix GPIO enable/disable operations which wrongly read the 0x0f register to obtain the current mask of the enabled lines instead of using the correct 0x0e register. Also fix access to bit 0 of the register which is marked as reserved. Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver") Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: v4l2-fwnode: Remove v4l2_async_notifier_parse_fwnode_endpoints_by_port()Niklas Söderlund
There are no users left of this helper and as it implements an undesirable and too simple behaviour that should instead be implemented directly by drivers remove it to prevent future uses of it. Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: rcar-vin: Rework CSI-2 firmware parsingNiklas Söderlund
Rework the CSI-2 firmware parsing code to not use the soon to be removed v4l2_async_notifier_parse_fwnode_endpoints_by_port() helper. The change only aims to prepare for the removing of the old helper and there are no functional change. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: rcar-vin: Use v4l2_async_subdev instead of fwnode_handle to match ↵Niklas Söderlund
subdevices In preparation of removing the usage of the old helper v4l2_async_notifier_parse_fwnode_endpoints_by_port() use the v4l2_async_subdev instead of fwnode_handle to match subdevices. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: rcar-vin: Rework parallel firmware parsingNiklas Söderlund
Rework the parallel firmware parsing code to not use the soon to be removed v4l2_async_notifier_parse_fwnode_endpoints_by_port() helper. The change only aims to prepare for the removing of the old helper and there are no functional change. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 22:43:37 +0000