| Age | Commit message (Collapse) | Author |
|---|
|
Allocate a page for use as a status page by a group of timelines, as we
only need a dword of storage for each (rounded up to the cacheline for
safety) we can pack multiple timelines into the same page. Each timeline
will then be able to track its own HW seqno.
v2: Reuse the common per-engine HWSP for the solitary ringbuffer
timeline, so that we do not have to emit (using per-gen specialised
vfuncs) the breadcrumb into the distinct timeline HWSP and instead can
keep on using the common MI_STORE_DWORD_INDEX. However, to maintain the
sleight-of-hand for the global/per-context seqno switchover, we will
store both temporarily (and so use a custom offset for the shared timeline
HWSP until the switch over).
v3: Keep things simple and allocate a page for each timeline, page
sharing comes next.
v4: I was caught repeating the same MI_STORE_DWORD_IMM over and over
again in selftests.
v5: And caught red handed copying create timeline + check.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181812.22804-3-chris@chris-wilson.co.uk
|
|
Previously we only accommodated having a vma pinned by a small number of
users, with the maximum being pinned for use by the display engine. As
such, we used a small bitfield only large enough to allow the vma to
be pinned twice (for back/front buffers) in each scanout plane. Keeping
the maximum permissible pin_count small allows us to quickly catch a
potential leak. However, as we want to split a 4096B page into 64
different cachelines and pin each cacheline for use by a different
timeline, we will exceed the current maximum permissible vma->pin_count
and so time has come to enlarge it.
Whilst we are here, try to pull together the similar bits:
Address/layout specification:
- bias, mappable, zone_4g: address limit specifiers
- fixed: address override, limits still apply though
- high: not strictly an address limit, but an address direction to search
Search controls:
- nonblock, nonfault, noevict
v2: Rewrite the guideline comment on bit consumption.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: John Harrison <john.C.Harrison@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181812.22804-2-chris@chris-wilson.co.uk
|
|
Supplement the per-engine HWSP with a per-timeline HWSP. That is a
per-request pointer through which we can check a local seqno,
abstracting away the presumption of a global seqno. In this first step,
we point each request back into the engine's HWSP so everything
continues to work with the global timeline.
v2: s/i915_request_hwsp/hwsp_seqno/ to emphasis that this is the current
HW value and that we are accessing it via i915_request merely as a
convenience.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181812.22804-1-chris@chris-wilson.co.uk
|
|
dev_consume_skb_irq() should be called in i596_interrupt() when skb
xmit done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <albin_yang@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree:
1) The nftnl mutex is now per-netns, therefore use reference counter
for matches and targets to deal with concurrent updates from netns.
Moreover, place extensions in a pernet list. Patches from Florian Westphal.
2) Bail out with EINVAL in case of negative timeouts via setsockopt()
through ip_vs_set_timeout(), from ZhangXiaoxu.
3) Spurious EINVAL on ebtables 32bit binary with 64bit kernel, also
from Florian.
4) Reset TCP option header parser in case of fingerprint mismatch,
otherwise follow up overlapping fingerprint definitions including
TCP options do not work, from Fernando Fernandez Mancera.
5) Compilation warning in ipt_CLUSTER with CONFIG_PROC_FS unset.
From Anders Roxell.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 2830bf6f05fb3e05bc4743274b806c821807a684.
The underlying assumption that one sparse section belongs into a single
numa node doesn't hold really. Robert Shteynfeld has reported a boot
failure. The boot log was not captured but his memory layout is as
follows:
Early memory node ranges
node 1: [mem 0x0000000000001000-0x0000000000090fff]
node 1: [mem 0x0000000000100000-0x00000000dbdf8fff]
node 1: [mem 0x0000000100000000-0x0000001423ffffff]
node 0: [mem 0x0000001424000000-0x0000002023ffffff]
This means that node0 starts in the middle of a memory section which is
also in node1. memmap_init_zone tries to initialize padding of a
section even when it is outside of the given pfn range because there are
code paths (e.g. memory hotplug) which assume that the full worth of
memory section is always initialized.
In this particular case, though, such a range is already intialized and
most likely already managed by the page allocator. Scribbling over
those pages corrupts the internal state and likely blows up when any of
those pages gets used.
Reported-by: Robert Shteynfeld <robert.shteynfeld@gmail.com>
Fixes: 2830bf6f05fb ("mm, memory_hotplug: initialize struct pages for the full memory section")
Cc: stable@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1. In current implementation, every VLPI will temporarily be mapped to
the first CPU in system (normally CPU0) and then moved to the real
scheduled CPU later.
2. So there is a time window and a VLPI may be sent to CPU0 instead of
the real scheduled vCPU, in a multi-CPU virtual machine.
3. However, CPU0 may have not been scheduled as a virtual CPU after
system boots up, so the value of its GICR_VPROPBASER is unknown at
that moment.
4. If the INTID of VLPI is larger than 2^(GICR_VPROPBASER.IDbits+1),
while IDbits is also in unknown state, GIC will behave as if the VLPI
is out of range and simply drop it, which results in interrupt missing
in Guest.
As no code will clear GICR_VPROPBASER at runtime, we can safely
initialize the IDbits field at boot time for each CPU to get rid of
this issue.
We also clear Valid bit of GICR_VPENDBASER in case any ancient
programming gets left in and causes memory corrupting. A new function
its_clear_vpend_valid() is added to reuse the code in
its_vpe_deschedule().
Fixes: e643d8034036 ("irqchip/gic-v3-its: Add VPE scheduling")
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
There is a NULL pointer dereference of dev_name in nfs_parse_devname()
The oops looks something like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs]
...
Call Trace:
? ida_alloc_range+0x34b/0x3d0
? nfs_clone_super+0x80/0x80 [nfs]
? nfs_free_parsed_mount_data+0x60/0x60 [nfs]
mount_fs+0x52/0x170
? __init_waitqueue_head+0x3b/0x50
vfs_kern_mount+0x6b/0x170
do_mount+0x216/0xdc0
ksys_mount+0x83/0xd0
__x64_sys_mount+0x25/0x30
do_syscall_64+0x65/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix this by adding a NULL check on dev_name
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
It is to solve RDMA performance issue.
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with
backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5).
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-4-git-send-email-eugen.hristev@microchip.com
|
|
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with
backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5).
Adding device tree bindings for this panel.
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
[eugen.hristev@microchip.com]: specified backlight and supply bindings
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-3-git-send-email-eugen.hristev@microchip.com
|
|
Precision Design Associates, Inc. (PDA) manufactures standard and custom
capacitive touch screens, LCD's embedded controllers and custom embedded
software. They specialize in industrial, rugged and outdoor
applications.
Website: http://www.pdaatl.com/
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547458584-29548-2-git-send-email-eugen.hristev@microchip.com
|
|
This adds support for the 3.5" LCD panel from LeMaker, sold for use with
BananaPi boards. It comes with a 24-bit RGB888 parallel interface and
requires an active-low DE signal
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-7-contact@paulk.fr
|
|
This adds the device-tree bindings for the LeMaker BL035-RGB-002 3.5"
QVGA TFT LCD panel, compatible with simple-panel.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-6-contact@paulk.fr
|
|
This introduces a new device-tree binding vendor prefix for Shenzhen
LeMaker Technology Co., Ltd.
This vendor was already in use but it was not documented until now.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Rob Hering <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-5-contact@paulk.fr
|
|
Support Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel, it is a MIPI
dual-DSI panel.
v4-resend:
- Thierry noted missing dt-bindings for v4 but forgot that he
already had applied them one kernel release back in
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ebc950fdff6d5f9250cd5a5a348af97f7d8508df
v4:
- address Philipp's comments
- real range for usleep_range and
- poweroff ordering in kingdisplay_panel_prepare
- return value beautification in panel_probe
- update author naming for full name
v3:
- address Thierry's comments
- error handling for init dsi writes in init
- unconditionally remove the panel
- don't use drm_panel_detach
- a bit of variable signednes wiggling
- I did talk to ChromeOS people and the delays really should be as short
as possible, so dropped the 100ms from the delay comments
v2:
- update timing + cmds from chromeos kernel
- new backlight API including switch to devm_of_find_backlight
- fix most of Sean Paul's comments
enable/prepare tracking seems something all panels do
- document origins of the init sequence
- lanes per dsi interface to 4 (two interfaces). Matches how tegra
and pending rockchip dual-dsi handle (dual-)dsi lanes
- spdx header instead of license boilerplate
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030091528.28211-1-heiko@sntech.de
|
|
ST7701 designed for small and medium sizes of TFT LCD display, is
capable of supporting up to 480RGBX864 in resolution. It provides
several system interfaces like MIPI/RGB/SPI.
Currently added support for Techstar TS8550B which is ST7701 based
480x854, 2-lane MIPI DSI LCD panel.
Driver now registering mipi_dsi device, but indeed it can extendable
for RGB if any requirement trigger in future.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-2-jagan@amarulasolutions.com
|
|
Techstar TS8550B MIPI DSI panel is 480x854, 2-lane MIPI DSI LCD panel
with inbuilt ST7701 chip.
The default regulator names in ST7701 chip is renamed in Techstar TS8550B
so, add specific binding names for them.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-1-jagan@amarulasolutions.com
|
|
[Why]
The flip and full structures were allocated but never freed.
[How]
Free them at the end of the function. There's a small behavioral
change here with the function returning early if the allocation fails
but we wouldn't should be doing anything in that case anyway.
Fixes: c00e0cc0fdc0 ("drm/amd/display: Call into DC once per multiplane flip")
Fixes: ea39594e0855 ("drm/amd/display: Perform plane updates only when needed")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Enhanced sync need to use vertical_interrupt1.
[How]
Add vertical_interrupt1 source to irq manger,
Implment setup vline interrupt interface.
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During any modeset the CRTC stream is removed and a new stream is added.
This new stream doesn't carry over CRC capture state if it was
previously set.
[How]
Re-program the stream for CRC capture. The existing DRM callback can
be re-used here for the most part - the only modification needed is
additional locking now that it's called from within commit tail.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In order to read CRC events when CRC capture is enabled the vblank
interrput handler needs to be running for the CRTC. The handler is
enabled while there is an active vblank reference.
When running IGT tests there will often be no active vblank reference
but the test expects to read a CRC value. This is valid usage (and
works on i915 since they have a CRC interrupt handler) so the reference
to the vblank should be grabbed while capture is active.
This issue was found running:
igt@kms_plane_multiple@atomic-pipe-b-tiling-none
The pipe-b is the only one in the initial commit and was not previously
active so no vblank reference is grabbed. The vblank interrupt is
not enabled and the test times out.
[How]
Keep a reference to the vblank as long as CRC capture is enabled.
If userspace never explicitly disables it then the reference is
also dropped when removing the CRTC from the context (stream = NULL).
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
On current design, driver cannot handle the interrupt for
down reply when link training is processing. The DOWN REQ
send before link training will keep in the pending DOWN REP
state in the queue.
It makes the next DOWN REQ be queued until time out.
[How]
To add a polling sequence before clear payload allocation table
to make sure the pending DOWN REP can be handled.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Both functions are obsolete and all calls have been replaced by
ttm_bo_get and ttm_bo_put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
In places where is might be necessary, the current behaviour of cleaning the
pointer is kept.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, the list of timelines is serialised by the struct_mutex, but
to alleviate difficulties with using that mutex in future, move the
list management under its own dedicated mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-5-chris@chris-wilson.co.uk
|
|
Currently we only allocate an object and vma if we are using a GGTT
virtual HWSP, and a plain struct page for a physical HWSP. For
convenience later on with global timelines, it will be useful to always
have the status page being tracked by a struct i915_vma. Make it so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-4-chris@chris-wilson.co.uk
|
|
Remove the struct_mutex requirement for looking up the vma for an
object.
v2: Highlight how the race for duplicate vma creation is resolved on
reacquiring the lock with a short comment.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-3-chris@chris-wilson.co.uk
|
|
A starting point to counter the pervasive struct_mutex. For the goal of
avoiding (or at least blocking under them!) global locks during user
request submission, a simple but important step is being able to manage
each clients GTT separately. For which, we want to replace using the
struct_mutex as the guard for all things GTT/VM and switch instead to a
specific mutex inside i915_address_space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-2-chris@chris-wilson.co.uk
|
|
Our goal is to remove struct_mutex and replace it with fine grained
locking. One of the thorny issues is our eviction logic for reclaiming
space for an execbuffer (or GTT mmaping, among a few other examples).
While eviction itself is easy to move under a per-VM mutex, performing
the activity tracking is less agreeable. One solution is not to do any
MRU tracking and do a simple coarse evaluation during eviction of
active/inactive, with a loose temporal ordering of last
insertion/evaluation. That keeps all the locking constrained to when we
are manipulating the VM itself, neatly avoiding the tricky handling of
possible recursive locking during execbuf and elsewhere.
Note that discarding the MRU (currently implemented as a pair of lists,
to avoid scanning the active list for a NONBLOCKING search) is unlikely
to impact upon our efficiency to reclaim VM space (where we think a LRU
model is best) as our current strategy is to use random idle replacement
first before doing a search, and over time the use of softpinned 48b
per-ppGTT is growing (thereby eliminating any need to perform any eviction
searches, in theory at least) with the remaining users being found on
much older devices (gen2-gen6).
v2: Changelog and commentary rewritten to elaborate on the duality of a
single list being both an inactive and active list.
v3: Consolidate bool parameters into a single set of flags; don't
comment on the duality of a single variable being a multiplicity of
bits.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-1-chris@chris-wilson.co.uk
|
|
posix_timers fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
-O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall
-DKTEST -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread
posix_timers.c
-o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers
/tmp/cc1FTZzT.o: In function `check_timer_create':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157:
undefined reference to `timer_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170:
undefined reference to `timer_settime'
collect2: error: ld returned 1 exit status
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
reuseport_bpf_numa fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc
--sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall
-Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -Wl,-O1
-Wl,--hash-style=gnu -Wl,--as-needed -lnuma reuseport_bpf_numa.c
-o
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa
/tmp/ccfUuExT.o: In function `send_from_node':
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138:
undefined reference to `numa_run_on_node'
/tmp/ccfUuExT.o: In function `main':
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230:
undefined reference to `numa_available'
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233:
undefined reference to `numa_max_node'
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libnuma.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
The older machines don't have the QCI instruction available.
With support for up to 256 crypto cards the probing of each
card has been extended to check card ids from 0 up to 255.
For machines with QCI support there is a filter limiting the
range of probed cards. The older machines (z196 and older)
don't have this filter and so since support for 256 cards is
in the driver all cards are probed. However, these machines
also require to have the card id fit into 6 bits. Exceeding
this limit results in a specification exception which happens
on every kernel startup even when there is no crypto configured
and used at all.
This fix limits the range of probed crypto cards to 64 if
there is no QCI instruction available to obey to the older
ap architecture and so fixes the specification exceptions
on z196 machines.
Cc: stable@vger.kernel.org # v4.17+
Fixes: af4a72276d49 ("s390/zcrypt: Support up to 256 crypto adapters.")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Dan Carpenter reported the following:
The patch 52898025cf7d: "[S390] dasd: security and PSF update patch
for EMC CKD ioctl" from Mar 8, 2010, leads to the following static
checker warning:
drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io()
error: using offset into zero size array 'psf_data[]'
drivers/s390/block/dasd_eckd.c
4458 /* Copy parms from caller */
4459 rc = -EFAULT;
4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
^^^^^^^
The user can specify any "usrparm.psf_data_len". They choose zero by
mistake.
4461 goto out;
4462 if (is_compat_task()) {
4463 /* Make sure pointers are sane even on 31 bit. */
4464 rc = -EINVAL;
4465 if ((usrparm.psf_data >> 32) != 0)
4466 goto out;
4467 if ((usrparm.rssd_result >> 32) != 0)
4468 goto out;
4469 usrparm.psf_data &= 0x7fffffffULL;
4470 usrparm.rssd_result &= 0x7fffffffULL;
4471 }
4472 /* alloc I/O data area */
4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL
| GFP_DMA);
4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL
| GFP_DMA);
4475 if (!psf_data || !rssd_result) {
kzalloc() returns a ZERO_SIZE_PTR (0x16).
4476 rc = -ENOMEM;
4477 goto out_free;
4478 }
4479
4480 /* get syscall header from user space */
4481 rc = -EFAULT;
4482 if (copy_from_user(psf_data,
4483 (void __user *)(unsigned long)
usrparm.psf_data,
4484 usrparm.psf_data_len))
That all works great.
4485 goto out_free;
4486 psf0 = psf_data[0];
4487 psf1 = psf_data[1];
But now we're assuming that "->psf_data_len" was at least 2 bytes.
Fix this by checking the user specified length psf_data_len.
Fixes: 52898025cf7d ("[S390] dasd: security and PSF update patch for EMC CKD ioctl")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The patch that added support for the virtually mapped kernel stacks changed
swsusp_arch_suspend to switch to the nodat-stack as the vmap stack is not
available while going in and out of suspend.
Unfortunately the switch to the nodat-stack is incorrect which breaks
suspend to disk.
Cc: stable@vger.kernel.org # v4.20
Fixes: ce3dc447493f ("s390: add support for virtually mapped kernel stacks")
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Previously callers to btrfs_end_transaction_throttle() would commit the
transaction if there wasn't enough delayed refs space. This happens in
relocation, and if the fs is relatively empty we'll run out of delayed
refs space basically immediately, so we'll just be stuck in this loop of
committing the transaction over and over again.
This code existed because we didn't have a good feedback mechanism for
running delayed refs, but with the delayed refs rsv we do now. Delete
this throttling code and let the btrfs_start_transaction() in relocation
deal with putting pressure on the delayed refs infrastructure. With
this patch we no longer take 5 minutes to balance a metadata only fs.
Qu has submitted a fstest to catch slow balance or excessive transaction
commits. Steps to reproduce:
* create subvolume
* create many (eg. 16000) inlined files, of size 2KiB
* iteratively snapshot and touch several files to trigger metadata
updates
* start balance -m
Reported-by: Qu Wenruo <wqu@suse.com>
Fixes: 64403612b73a ("btrfs: rework btrfs_check_space_for_delayed_refs")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add tags and steps to reproduce ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On SoC reset all GPIO interrupts are disable. However, if kexec is
used to boot into a new kernel, the SoC does not experience a
reset. Hence GPIO interrupts can be left enabled from the previous
kernel. It is then possible for the interrupt to fire before an
interrupt handler is registered, resulting in the kernel complaining
of an "unexpected IRQ trap", the interrupt is never cleared, and so
fires again, resulting in an interrupt storm.
Disable all GPIO interrupts before registering the GPIO IRQ chip.
Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When splitting a leaf or node from one of the trees that are modified when
flushing pending block groups (extent, chunk, device and free space trees),
we need to allocate a new tree block, which in turn can result in the need
to allocate a new block group. After allocating the new block group we may
need to flush new block groups that were previously allocated during the
course of the current transaction, which is what may cause a deadlock due
to attempts to write lock twice the same leaf or node, as when splitting
a leaf or node we are holding a write lock on it and its parent node.
The same type of deadlock can also happen when increasing the tree's
height, since we are holding a lock on the existing root while allocating
the tree block to use as the new root node.
An example trace when the deadlock happens during the leaf split path is:
[27175.293054] CPU: 0 PID: 3005 Comm: kworker/u17:6 Tainted: G W 4.19.16 #1
[27175.293942] Hardware name: Penguin Computing Relion 1900/MD90-FS0-ZB-XX, BIOS R15 06/25/2018
[27175.294846] Workqueue: btrfs-extent-refs btrfs_extent_refs_helper [btrfs]
(...)
[27175.298384] RSP: 0018:ffffab2087107758 EFLAGS: 00010246
[27175.299269] RAX: 0000000000000bbd RBX: ffff9fadc7141c48 RCX: 0000000000000001
[27175.300155] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9fadc7141c48
[27175.301023] RBP: 0000000000000001 R08: ffff9faeb6ac1040 R09: ffff9fa9c0000000
[27175.301887] R10: 0000000000000000 R11: 0000000000000040 R12: ffff9fb21aac8000
[27175.302743] R13: ffff9fb1a64d6a20 R14: 0000000000000001 R15: ffff9fb1a64d6a18
[27175.303601] FS: 0000000000000000(0000) GS:ffff9fb21fa00000(0000) knlGS:0000000000000000
[27175.304468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[27175.305339] CR2: 00007fdc8743ead8 CR3: 0000000763e0a006 CR4: 00000000003606f0
[27175.306220] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[27175.307087] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[27175.307940] Call Trace:
[27175.308802] btrfs_search_slot+0x779/0x9a0 [btrfs]
[27175.309669] ? update_space_info+0xba/0xe0 [btrfs]
[27175.310534] btrfs_insert_empty_items+0x67/0xc0 [btrfs]
[27175.311397] btrfs_insert_item+0x60/0xd0 [btrfs]
[27175.312253] btrfs_create_pending_block_groups+0xee/0x210 [btrfs]
[27175.313116] do_chunk_alloc+0x25f/0x300 [btrfs]
[27175.313984] find_free_extent+0x706/0x10d0 [btrfs]
[27175.314855] btrfs_reserve_extent+0x9b/0x1d0 [btrfs]
[27175.315707] btrfs_alloc_tree_block+0x100/0x5b0 [btrfs]
[27175.316548] split_leaf+0x130/0x610 [btrfs]
[27175.317390] btrfs_search_slot+0x94d/0x9a0 [btrfs]
[27175.318235] btrfs_insert_empty_items+0x67/0xc0 [btrfs]
[27175.319087] alloc_reserved_file_extent+0x84/0x2c0 [btrfs]
[27175.319938] __btrfs_run_delayed_refs+0x596/0x1150 [btrfs]
[27175.320792] btrfs_run_delayed_refs+0xed/0x1b0 [btrfs]
[27175.321643] delayed_ref_async_start+0x81/0x90 [btrfs]
[27175.322491] normal_work_helper+0xd0/0x320 [btrfs]
[27175.323328] ? move_linked_works+0x6e/0xa0
[27175.324160] process_one_work+0x191/0x370
[27175.324976] worker_thread+0x4f/0x3b0
[27175.325763] kthread+0xf8/0x130
[27175.326531] ? rescuer_thread+0x320/0x320
[27175.327284] ? kthread_create_worker_on_cpu+0x50/0x50
[27175.328027] ret_from_fork+0x35/0x40
[27175.328741] ---[ end trace 300a1b9f0ac30e26 ]---
Fix this by preventing the flushing of new blocks groups when splitting a
leaf/node and when inserting a new root node for one of the trees modified
by the flushing operation, similar to what is done when COWing a node/leaf
from on of these trees.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202383
Reported-by: Eli V <eliventer@gmail.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Certain SNB machines (eg. ASUS K53SV) seem to have a broken BIOS
which misprograms the hardware badly when encountering a suitably
high resolution display. The programmed pipe timings are somewhat
bonkers and the DPLL is totally misprogrammed (P divider == 0).
That will result in atomic commit timeouts as apparently the pipe
is sufficiently stuck to not signal vblank interrupts.
IIRC something like this was also observed on some other SNB
machine years ago (might have been a Dell XPS 8300) but a BIOS
update cured it. Sadly looks like this was never fixed for the
ASUS K53SV as the latest BIOS (K53SV.320 11/11/2011) is still
broken.
The quickest way to deal with this seems to be to shut down
the pipe+ports+DPLL. Unfortunately doing this during the
normal sanitization phase isn't quite soon enough as we
already spew several WARNs about the bogus hardware state.
But it's better than hanging the boot for a few dozen seconds.
Since this is limited to a few old machines it doesn't seem
entirely worthwile to try and rework the readout+sanitization
code to handle it more gracefully.
v2: Fix potential NULL deref (kbuild test robot)
Constify has_bogus_dpll_config()
Cc: stable@vger.kernel.org # v4.20+
Cc: Daniel Kamil Kozar <dkk089@gmail.com>
Reported-by: Daniel Kamil Kozar <dkk089@gmail.com>
Tested-by: Daniel Kamil Kozar <dkk089@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109245
Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111174950.10681-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Just like the frame counter, the pixel counter also reads zero
all the time when the TV encoder is used. Fortunately the
scanline counter still works sufficiently well so let's use that
to correct the vblank timestamps. Otherwise the timestamps may
en up out of whack, and since we use them to guesstimate the
vblank counter value that may end up incorrect as well.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125181931.19482-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Ever since commit 204474a6b859 ("drm/i915: Pass down rc in
intel_encoder->compute_config()") we're supposed to return an
errno from .compute_config(). I failed to notice that when
pushing the TV encoder fixes which were written before said
commmit. Fix up the return value for the error case.
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 690157f0a9e7 ("drm/i915/tv: Fix >1024 modes on gen3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125181931.19482-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
power off the phy should be done before populate the phy. Otherwise,
am335x_init() could be called by the phy owner to power on the phy first,
then am335x_phy_probe() turns off the phy again without the caller knowing
it.
Fixes: 2fc711d76352 ("usb: phy: am335x: Enable USB remote wakeup using PHY wakeup")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
If clk_prepare_enable() fails in dwc3_exynos_probe() or in
dwc3_exynos_resume(), exynos->clks[0] is left undisabled
because of usage preincrement in while condition.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 9f2168367a0a ("usb: dwc3: exynos: Rework clock handling and prepare for new variants")
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Fix link errors when CONFIG_FSL_USB2_OTG is enabled and USB_OTG_FSM is
set to module then the following link error occurs.
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_ioctl':
drivers/usb/phy/phy-fsl-usb.c:1083: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:1083:(.text+0x574): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_srp':
drivers/usb/phy/phy-fsl-usb.c:674: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:674:(.text+0x61c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_host':
drivers/usb/phy/phy-fsl-usb.c:593: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:593:(.text+0x7a4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_start_hnp':
drivers/usb/phy/phy-fsl-usb.c:695: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:695:(.text+0x858): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `a_wait_enum':
drivers/usb/phy/phy-fsl-usb.c:274: undefined reference to `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.c:274:(.text+0x16f0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o:drivers/usb/phy/phy-fsl-usb.c:619: more undefined references to `otg_statemachine' follow
aarch64-linux-gnu-ld: drivers/usb/phy/phy-fsl-usb.o: in function `fsl_otg_set_peripheral':
drivers/usb/phy/phy-fsl-usb.c:619:(.text+0x1fa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `otg_statemachine'
make[1]: *** [Makefile:1020: vmlinux] Error 1
make[1]: Target 'Image' not remade because of errors.
make: *** [Makefile:152: sub-make] Error 2
make: Target 'Image' not remade because of errors.
Rework so that FSL_USB2_OTG depends on that the USB_OTG_FSM is builtin.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
(!x & y) strikes again.
Fix bitwise and boolean operations by enclosing the expression:
intcsr & (1 << NET2272_PCI_IRQ)
in parentheses, before applying the boolean operator '!'.
Notice that this code has been there since 2011. So, it would
be helpful if someone can double-check this.
This issue was detected with the help of Coccinelle.
Fixes: ceb80363b2ec ("USB: net2272: driver for PLX NET2272 USB device controller")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
