| Age | Commit message (Collapse) | Author |
|---|
|
Since the type of pg_flags is u32, adev->pg_flags >> 16 >> 16 is 0
regardless of the values of its operands.
So removing the operations upper_32_bits and lower_32_bits.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Port mes11 hw_fini to mes12, fix for mode1 reset.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since the type of data_size is uint32_t, adev->umsch_mm.data_size - 1 >> 16 >> 16 is 0
regardless of the values of its operands
So removing the operations upper_32_bits and lower_32_bits.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The major fix here is for a filesystem corruption issue reported on
Apple M1 as a result of buggy management of the floating point
register state introduced in 6.8. I initially reverted one of the
offending patches, but in the end Ard cooked a proper fix so there's a
revert+reapply in the series.
Aside from that, we've got some CPU errata workarounds and misc other
fixes.
- Fix broken FP register state tracking which resulted in filesystem
corruption when dm-crypt is used
- Workarounds for Arm CPU errata affecting the SSBS Spectre
mitigation
- Fix lockdep assertion in DMC620 memory controller PMU driver
- Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
disabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Avoid erroneous elide of user state reload
Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
perf/arm-dmc620: Fix lockdep assert in ->event_init()
Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: errata: Add workaround for Arm errata 3194386 and 3312417
arm64: cputype: Add Neoverse-V3 definitions
arm64: cputype: Add Cortex-X4 definitions
arm64: barrier: Restore spec_bar() macro
|
|
When user space sets an invalid ta type, the pointer context will be empty.
So it need to check the pointer context before using it
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enum asic_type always greater than or equal CHIP_TAHITI.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
skip to create 'xxx_err_count' node when ACA is enabled.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
|
|
There was a semantic conflict between 21a8f8a0eb35 ("irqchip: Add RISC-V
incoming MSI controller early driver") and dc892fb44322 ("riscv: Use
IPIs for remote cache/TLB flushes by default") due to an API change.
This manifests as a build failure post-merge.
Fixes: 0bfbc914d943 ("Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux")
Reported-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240522184953.28531-3-palmer@rivosinc.com
Link: https://lore.kernel.org/all/mhng-10b71228-cf3e-42ca-9abf-5464b15093f1@palmer-ri-x1c9/
|
|
GuC loading can take longer than it is supposed to for various
reasons. So add in the code to cope with that and to report it when it
happens. There are also many different reasons why GuC loading can
fail, so add in the code for checking for those and for reporting
issues in a meaningful manner rather than just hitting a timeout and
saying 'fail: status = %x'.
Also, remove the 'FIXME' comment about an i915 bug that has never been
applicable to Xe!
v2: Actually report the requested and granted frequencies rather than
showing granted twice (review feedback from Badal).
v3: Locally code all the timeout and end condition handling because a
helper function is not allowed (review feedback from Lucas/Rodrigo).
v4: Add more documentation comments and rename a define to add units
(review feedback from Lucas).
v5: Fix copy/paste error in xe_mmio_wait32_not (review feedback from
Lucas) and rebase (no more return value from guc_wait_ucode).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240518043700.3264362-3-John.C.Harrison@Intel.com
|
|
Other driver code beyond the sysfs interface wants to know about
throttling. So make the query function globally accessible.
v2: Revert include order change (review feedback from Lucas)
v3: Remove '_sysfs' from throttle file names and keep limit query in
the same file rather than moving elsewhere (review feedback from
Rodrigo).
v4: Correct #include while renaming header file (review feedback
from Lucas).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240518043700.3264362-2-John.C.Harrison@Intel.com
|
|
This error capture prints into dmesg HW state when a gpu hang happens.
It was useful when we did not had devcoredump, now it is a incompleted
version of devcoredump that has potential to flood dmesg.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522203431.191594-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Process name help us track what application caused the gpug hang, this
is crucial when running several applications at the same time.
v2:
- handle Xe KMD exec_queues without VM
v3:
- use get_pid_task() (suggested by Nirmoy)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522201203.145403-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
'xe_gt_desc' is unused since
commit 1e6c20be6c83 ("drm/xe: Drop extra_gts[] declarations and
XE_GT_TYPE_REMOTE").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link:
https://patchwork.freedesktop.org/patch/msgid/20240522175840.382107-1-linux@treblig.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When requesting an NMI window, WARN on vNMI support being enabled if and
only if NMIs are actually masked, i.e. if the vCPU is already handling an
NMI. KVM's ABI for NMIs that arrive simultanesouly (from KVM's point of
view) is to inject one NMI and pend the other. When using vNMI, KVM pends
the second NMI simply by setting V_NMI_PENDING, and lets the CPU do the
rest (hardware automatically sets V_NMI_BLOCKING when an NMI is injected).
However, if KVM can't immediately inject an NMI, e.g. because the vCPU is
in an STI shadow or is running with GIF=0, then KVM will request an NMI
window and trigger the WARN (but still function correctly).
Whether or not the GIF=0 case makes sense is debatable, as the intent of
KVM's behavior is to provide functionality that is as close to real
hardware as possible. E.g. if two NMIs are sent in quick succession, the
probability of both NMIs arriving in an STI shadow is infinitesimally low
on real hardware, but significantly larger in a virtual environment, e.g.
if the vCPU is preempted in the STI shadow. For GIF=0, the argument isn't
as clear cut, because the window where two NMIs can collide is much larger
in bare metal (though still small).
That said, KVM should not have divergent behavior for the GIF=0 case based
on whether or not vNMI support is enabled. And KVM has allowed
simultaneous NMIs with GIF=0 for over a decade, since commit 7460fb4a3400
("KVM: Fix simultaneous NMIs"). I.e. KVM's GIF=0 handling shouldn't be
modified without a *really* good reason to do so, and if KVM's behavior
were to be modified, it should be done irrespective of vNMI support.
Fixes: fa4c027a7956 ("KVM: x86: Add support for SVM's Virtual NMI")
Cc: stable@vger.kernel.org
Cc: Santosh Shukla <Santosh.Shukla@amd.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240522021435.1684366-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Force KVM_WERROR if the global WERROR is enabled to avoid pestering the
user about a Kconfig that will ultimately be ignored. Force KVM_WERROR
instead of making it mutually exclusive with WERROR to avoid generating a
.config builds KVM with -Werror, but has KVM_WERROR=n.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240517180341.974251-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Disable KVM's "prove #VE" support by default, as it provides no functional
value, and even its sanity checking benefits are relatively limited. I.e.
it should be fully opt-in even on debug kernels, especially since EPT
Violation #VE suppression appears to be buggy on some CPUs.
Opportunistically add a line in the help text to make it abundantly clear
that KVM_INTEL_PROVE_VE should never be enabled in a production
environment.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240518000430.1118488-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't suppress printing EPT_VIOLATION_VE in /proc/cpuinfo, knowing whether
or not KVM_INTEL_PROVE_VE actually does anything is extremely valuable.
A privileged user can get at the information by reading the raw MSR, but
the whole point of the VMX flags is to avoid needing to glean information
from raw MSR reads.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240518000430.1118488-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Print the SPTEs that correspond to the faulting GPA on an unexpected EPT
Violation #VE to help the user debug failures, e.g. to pinpoint which SPTE
didn't have SUPPRESS_VE set.
Opportunistically assert that the underlying exit reason was indeed an EPT
Violation, as the CPU has *really* gone off the rails if a #VE occurs due
to a completely unexpected exit reason.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240518000430.1118488-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Dump the VMCS on an unexpected #VE, otherwise it's practically impossible
to figure out why the #VE occurred.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240518000430.1118488-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Assert that KVM doesn't set a SPTE to a value that could trigger an EPT
Violation #VE on a non-MMIO SPTE, e.g. to help detect bugs even without
KVM_INTEL_PROVE_VE enabled, and to help debug actual #VE failures.
Note, this will run afoul of TDX support, which needs to reflect emulated
MMIO accesses into the guest as #VEs (which was the whole point of adding
EPT Violation #VE support in KVM). The obvious fix for that is to exempt
MMIO SPTEs, but that's annoyingly difficult now that is_mmio_spte() relies
on a per-VM value. However, resolving that conundrum is a future problem,
whereas getting KVM_INTEL_PROVE_VE healthy is a current problem.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240518000430.1118488-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Always handle #VEs, e.g. due to prove EPT Violation #VE failures, in L0,
as KVM does not expose any #VE capabilities to L1, i.e. any and all #VEs
are KVM's responsibility.
Fixes: 8131cf5b4fd8 ("KVM: VMX: Introduce test mode related to EPT violation VE")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240518000430.1118488-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Point vmcs02.VE_INFORMATION_ADDRESS at the vCPU's #VE info page when
initializing vmcs02, otherwise KVM will run L2 with EPT Violation #VE
enabled and a VE info address pointing at pfn 0.
Fixes: 8131cf5b4fd8 ("KVM: VMX: Introduce test mode related to EPT violation VE")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240518000430.1118488-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't terminate the VM on an unexpected #VE, as it's extremely unlikely
the #VE is fatal to the guest, and even less likely that it presents a
danger to the host. Simply resume the guest on "failure", as the #VE info
page's BUSY field will prevent converting any more EPT Violations to #VEs
for the vCPU (at least, that's what the BUSY field is supposed to do).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240518000430.1118488-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use SHADOW_NONPRESENT_VALUE when zapping TDP MMU SPTEs with mmu_lock held
for read, tdp_mmu_zap_spte_atomic() was simply missed during the initial
development.
Fixes: 7f01cab84928 ("KVM: x86/mmu: Allow non-zero value for non-present SPTE and removed SPTE")
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
[sean: write changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20240518000430.1118488-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that we eliminated all the mem_access get/put with its
locking issues from the inner calls of migration, we can
allow D3Cold.
Enable it when VRAM utilization is lower then 300Mb. On
higher utilization we only allow D3hot so we don't increase
so much the latency on runtime resume due to the memory
restoration.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522170105.327472-7-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
GuC reset status is not reliable for this purpose and it is
once in a while ending up in a situation of D3Cold, where
power_reset is false and without the proper memory restoration
the GuC reload and Display will fail to come back from D3Cold.
So, let's do a full restoration of everything if we have a risk
of losing power, without further optimizations.
v2: also remove the gut_in_reset function (Anshuman)
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522170105.327472-6-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Prepare power-well and DC handling for a full power
lost during D3Cold, then sanitize it upon D3->D0.
Otherwise we get a bunch of state mismatch.
Ideally we could leave DC9 enabled and wouldn't need
to move DC9->DC0 on every runtime resume, however,
the disable_DC is part of the power-well checks and
intrinsic to the dc_off power well. In the future that
can be detangled so we can have even bigger power savings.
But for now, let's focus on getting a D3Cold, which saves
much more power by itself.
v2: create new functions to avoid full-suspend-resume path,
which would result in a deadlock between xe_gem_fault and the
modeset-ioctl.
v3: Only avoid the full modeset to avoid the race, for a more
robust suspend-resume.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522170105.327472-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In the regular use case scenario, user space will create a
VM, and keep it alive for the entire duration of its workload.
For the regular desktop cases, it means that the VM
is alive even on idle scenarios where display goes off. This
is unacceptable since this would entirely block runtime PM
indefinitely, blocking deeper Package-C state. This would be
a waste drainage of power.
Limit the VM protection solely for long-running workloads that
are not protected by the scheduler references.
By design, run_job for long-running workloads returns NULL and
the scheduler drops all the references of it, hence protecting
the VM for this case is necessary.
v2: Update commit message to a more imperative language and to
reflect why the VM protection is really needed.
Also add a comment in the code to let the reason visbible.
v3: Remove vma_access case and the mentions to mmap. Mmap cases
are already protected by the gem page fault.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522170105.327472-4-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Limit the protection only during moments of actual job execution,
and introduce protection for guc submit fini, which is currently
unprotected due to the absence of exec_queue life protection.
In the regular use case scenario, user space will create an
exec queue, and keep it alive to reuse that until it is done
with that kind of workload.
For the regular desktop cases, it means that the exec_queue
is alive even on idle scenarios where display goes off. This
is unacceptable since this would entirely block runtime PM
indefinitely, blocking deeper Package-C state. This would be
a waste drainage of power.
Cc: Matthew Brost <matthew.brost@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522170105.327472-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Let's be clear on what it is actually doing and align with
xe_pm_runtime_get_if_active doc style.
Tested-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522170105.327472-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Current callers of this function are already taking the result
to a boolean and using in an if. It might be a problem because
current function might return negative error codes on failure,
without increasing the reference counter.
In this scenario we could end up with extra 'put' call ending
in unbalanced scenarios.
Let's fix it, while aligning with the current xe_pm_get_if_in_use
style.
Tested-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522170105.327472-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit c97bf629963e ("riscv: Fix text patching when IPI are used")
converted ftrace_make_nop() to use patch_insn_write() which does not
emit any icache flush relying entirely on __ftrace_modify_code() to do
that.
But we missed that ftrace_make_nop() was called very early directly when
converting mcount calls into nops (actually on riscv it converts 2B nops
emitted by the compiler into 4B nops).
This caused crashes on multiple HW as reported by Conor and Björn since
the booting core could have half-patched instructions in its icache
which would trigger an illegal instruction trap: fix this by emitting a
local flush icache when early patching nops.
Fixes: c97bf629963e ("riscv: Fix text patching when IPI are used")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240523115134.70380-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Short summary of fixes pull:
nouveau:
- use tile_mode and pte_kind for VM_BIND bo allocations
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516072658.GA8395@linux.fritz.box
|
|
Fix the following -Wformat-security compile warnings adding missing
format arguments:
latency-collector.c: In function ‘show_available’:
latency-collector.c:938:17: warning: format not a string literal and
no format arguments [-Wformat-security]
938 | warnx(no_tracer_msg);
| ^~~~~
latency-collector.c:943:17: warning: format not a string literal and
no format arguments [-Wformat-security]
943 | warnx(no_latency_tr_msg);
| ^~~~~
latency-collector.c: In function ‘find_default_tracer’:
latency-collector.c:986:25: warning: format not a string literal and
no format arguments [-Wformat-security]
986 | errx(EXIT_FAILURE, no_tracer_msg);
|
^~~~
latency-collector.c: In function ‘scan_arguments’:
latency-collector.c:1881:33: warning: format not a string literal and
no format arguments [-Wformat-security]
1881 | errx(EXIT_FAILURE, no_tracer_msg);
| ^~~~
Link: https://lore.kernel.org/linux-trace-kernel/20240404011009.32945-1-skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Fixes: e23db805da2df ("tracing/tools: Add the latency-collector to tools directory")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
A couple of fixes to avoid calling DMA sync API when it's not needed.
This doesn't stop from discussing if IOMMU code is doing the right thing,
i.e. dereferences SG list when orig_nents == 0, but this is a separate
story.
|
|
An issue was found on the RTL8125b when transmitting small fragmented
packets, whereby invalid entries were inserted into the transmit ring
buffer, subsequently leading to calls to dma_unmap_single() with a null
address.
This was caused by rtl8169_start_xmit() not noticing changes to nr_frags
which may occur when small packets are padded (to work around hardware
quirks) in rtl8169_tso_csum_v2().
To fix this, postpone inspecting nr_frags until after any padding has been
applied.
Fixes: 9020845fb5d6 ("r8169: improve rtl8169_start_xmit")
Cc: stable@vger.kernel.org
Signed-off-by: Ken Milmore <ken.milmore@gmail.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/27ead18b-c23d-4f49-a020-1fc482c5ac95@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The top "events" directory has a static inode (it's created when it is and
removed when the directory is removed). There's no need to use the events
ei->attr to determine its permissions. But it is used for saving the
permissions of the "events" directory for when it is created, as that is
needed for the default permissions for the files and directories
underneath it.
For example:
# cd /sys/kernel/tracing
# mkdir instances/foo
# chown 1001 instances/foo/events
The files under instances/foo/events should still have the same owner as
instances/foo (which the instances/foo/events ei->attr will hold), but the
events directory now has owner 1001.
Link: https://lore.kernel.org/lkml/20240522165032.104981011@goodmis.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The permissions being set during the creation of the inodes was updating
eventfs_inode attributes as well. Those attributes should only be touched
by the setattr or remount operations, not during the creation of inodes.
The eventfs_inode attributes should only be used to set the inodes and
should not be modified during the inode creation.
Simplify the code and fix the situation by:
1) Removing the eventfs_find_events() and doing a simple lookup for
the events descriptor in eventfs_get_inode()
2) Remove update_events_attr() as the attributes should only be used
to update the inode and should not be modified here.
3) Add update_inode_attr() that uses the attributes to determine what
the inode permissions should be.
4) As the parent_inode of the eventfs_root_inode structure is no longer
needed, remove it.
Now on creation, the inode gets the proper permissions without causing
side effects to the ei->attr field.
Link: https://lore.kernel.org/lkml/20240522165031.944088388@goodmis.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Now that inodes have their permissions updated on remount, the only other
places to update the inode permissions are when they are created and in
the setattr callback. The getattr and permission callbacks are not needed
as the inodes should already be set at their proper settings.
Remove the callbacks, as it not only simplifies the code, but also allows
more flexibility to fix the inconsistencies with various corner cases
(like changing the permission of an instance directory).
Link: https://lore.kernel.org/lkml/20240522165031.782066021@goodmis.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
To simplify the code, create a eventfs_get_inode() that is used when an
eventfs file or directory is created. Have the internal tracefs_inode
updated the appropriate flags in this function and update the inode's
mode as well.
Link: https://lore.kernel.org/lkml/20240522165031.624864160@goodmis.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When the inode is being dropped from the dentry, the TRACEFS_EVENT_INODE
flag needs to be cleared to prevent a remount from calling
eventfs_remount() on the tracefs_inode private data. There's a race
between the inode is dropped (and the dentry freed) to where the inode is
actually freed. If a remount happens between the two, the eventfs_inode
could be accessed after it is freed (only the dentry keeps a ref count on
it).
Currently the TRACEFS_EVENT_INODE flag is cleared from the dentry iput()
function. But this is incorrect, as it is possible that the inode has
another reference to it. The flag should only be cleared when the inode is
really being dropped and has no more references. That happens in the
drop_inode callback of the inode, as that gets called when the last
reference of the inode is released.
Remove the tracefs_d_iput() function and move its logic to the more
appropriate tracefs_drop_inode() callback function.
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.908205106@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Fixes: baa23a8d4360d ("tracefs: Reset permissions on remount if permissions are options")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The change to update the permissions of the eventfs_inode had the
misconception that using the tracefs_inode would find all the
eventfs_inodes that have been updated and reset them on remount.
The problem with this approach is that the eventfs_inodes are freed when
they are no longer used (basically the reason the eventfs system exists).
When they are freed, the updated eventfs_inodes are not reset on a remount
because their tracefs_inodes have been freed.
Instead, since the events directory eventfs_inode always has a
tracefs_inode pointing to it (it is not freed when finished), and the
events directory has a link to all its children, have the
eventfs_remount() function only operate on the events eventfs_inode and
have it descend into its children updating their uid and gids.
Link: https://lore.kernel.org/all/CAK7LNARXgaWw3kH9JgrnH4vK6fr8LDkNKf3wq8NhMWJrVwJyVQ@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.754424703@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: baa23a8d4360d ("tracefs: Reset permissions on remount if permissions are options")
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When a remount happens, if a gid or uid is specified update the inodes to
have the same gid and uid. This will allow the simplification of the
permissions logic for the dynamically created files and directories.
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.592429986@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Fixes: baa23a8d4360d ("tracefs: Reset permissions on remount if permissions are options")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The directories require unique inode numbers but all the eventfs files
have the same inode number. Prevent the directories from having the same
inode numbers as the files as that can confuse some tooling.
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.428826685@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Fixes: 834bf76add3e6 ("eventfs: Save directory inodes in the eventfs_inode structure")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Process name help us track what application caused the gpug hang, this
is crucial when running several applications at the same time.
v2:
- handle Xe KMD exec_queues without VM
v3:
- use get_pid_task() (suggested by Nirmoy)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522201203.145403-1-jose.souza@intel.com
|
|
cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark()
resulting in the following sanitizer report:
UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask [64][1]'
CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117)
ubsan_epilogue (lib/ubsan.c:232)
__ubsan_handle_out_of_bounds (lib/ubsan.c:429)
cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline]
do_map_benchmark (kernel/dma/map_benchmark.c:104)
map_benchmark_ioctl (kernel/dma/map_benchmark.c:246)
full_proxy_unlocked_ioctl (fs/debugfs/file.c:333)
__x64_sys_ioctl (fs/ioctl.c:890)
do_syscall_64 (arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Use cpumask_of_node() in place when binding a kernel thread to a cpuset
of a particular node.
Note that the provided node id is checked inside map_benchmark_ioctl().
It's just a NUMA_NO_NODE case which is not handled properly later.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 65789daa8087 ("dma-mapping: add benchmark support for streaming DMA APIs")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
While validating node ids in map_benchmark_ioctl(), node_possible() may
be provided with invalid argument outside of [0,MAX_NUMNODES-1] range
leading to:
BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214)
Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971
CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117)
kasan_report (mm/kasan/report.c:603)
kasan_check_range (mm/kasan/generic.c:189)
variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline]
arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline]
_test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline]
node_state (include/linux/nodemask.h:423) [inline]
map_benchmark_ioctl (kernel/dma/map_benchmark.c:214)
full_proxy_unlocked_ioctl (fs/debugfs/file.c:333)
__x64_sys_ioctl (fs/ioctl.c:890)
do_syscall_64 (arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Compare node ids with sane bounds first. NUMA_NO_NODE is considered a
special valid case meaning that benchmarking kthreads won't be bound to a
cpuset of a given node.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 65789daa8087 ("dma-mapping: add benchmark support for streaming DMA APIs")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If do_map_benchmark() has failed, there is nothing useful to copy back
to userspace.
Suggested-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
kthread creation failure is invalidly handled inside do_map_benchmark().
The put_task_struct() calls on the error path are supposed to balance the
get_task_struct() calls which only happen after all the kthreads are
successfully created. Rollback using kthread_stop() for already created
kthreads in case of such failure.
In normal situation call kthread_stop_put() to gracefully stop kthreads
and put their task refcounts. This should be done for all started
kthreads.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 65789daa8087 ("dma-mapping: add benchmark support for streaming DMA APIs")
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
