| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"I'm actually surprised this time. There aren't any new Qualcomm SoC
clk drivers. And there's zero diff in the core clk framework.
Instead we have new clk drivers for STM and Sophgo, with
Samsung^WGoogle in third for the diffstat because they introduced HSI0
and HSI2 clk drivers for Google's GS101 SoC (high speed interface
things like PCIe, UFS, and MMC).
Beyond those big diffs there's the usual updates to various clk
drivers for incorrect parent descriptions or mising
MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
interesting here.
New Drivers:
- STM32MP257 SoC clk driver
- Airoha EN7581 SoC clk driver
- Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
- Loongson-2k0500 and Loongson-2k2000 SoC clk driver
- Add HSI0 and HSI2 clock controllers for Google GS101
- Add i.MX95 BLK CTL clock driver
Updates:
- Allocate clk_ops dynamically for SCMI clk driver
- Add support in qcom RCG and RCG2 for multiple configurations for
the same frequency
- Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
issues
- Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
boards
- Cleanups and fixes for Qualcomm Stromer PLLs
- Reduce max CPU frequency on Qualcomm APSS IPQ5018
- Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
clk drivers
- Make Qualcomm MSM8998 Venus clocks functional
- Cleanup downstream remnants related to DisplayPort across Qualcomm
SM8450, SM6350, SM8550, and SM8650
- Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
- Use a specific Qualcomm QCS404 compatible for the otherwise generic
HFPLL
- Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
- Remove an unused field in the Qualcomm RPM clk driver
- Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
global clock controller drivers
- Allow choice of manual or firmware-driven control over PLLs, needed
to fully implement CPU clock controllers on Exynos850
- Correct PLL clock IDs on ExynosAutov9
- Propagate certain clock rates to allow setting proper SPI clock
rates on Google GS101
- Mark certain Google GS101 clocks critical
- Convert old S3C64xx clock controller bindings to DT schema
- Add new PLL rate and missing mux on Rockchip rk3568
- Add missing reset line on Rockchip rk3588
- Removal of an unused field in struct rockchip_mmc_clock
- Amlogic s4/a1: add regmap maximum register for proper debugfs dump
- Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
- Amlogic pll driver: print clock name on lock error to help debug
- Amlogic vclk: finish dsi clock path support
- Amlogic license: fix occurence "GPL v2" as reported by checkpatch
- Add PM runtime support to i.MX8MP Audiomix
- Add DT schema for i.MX95 Display Master Block Control
- Convert to platform remove callback returning void for i.MX8MP
Audiomix
- Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
R-Car V4M
- Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
- Prepare power domain support for Renesas RZ/G2L family members, and
add actual support on Renesas RZ/G3S SoC
- Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
R-Car V4M
- Add additional constraints to Allwinner A64 PLL MIPI clock
- Fix autoloading sunxi-ng clocks when build as a module"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
clk: samsung: Don't register clkdev lookup for the fixed rate clocks
clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
clk: qcom: Fix SM_GPUCC_8650 dependencies
clk: qcom: Fix SC_CAMCC_8280XP dependencies
dt-bindings: clocks: stm32mp25: add access-controllers description
clock, reset: microchip: move all mpfs reset code to the reset subsystem
clk: samsung: gs101: drop unused HSI2 clock parent data
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
dt-bindings: clock: fixed: Define a preferred node name
clk: meson: s4: fix module autoloading
clk: samsung: gs101: mark some apm UASC and XIU clocks critical
clk: imx: imx8mp: Convert to platform remove callback returning void
clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
clk: bcm: rpi: Assign ->num before accessing ->hws
clk: bcm: dvp: Assign ->num before accessing ->hws
clk: samsung: gs101: add support for cmu_hsi2
clk: samsung: gs101: add support for cmu_hsi0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core:
- IOMMU memory usage observability - This will make the memory used
for IO page tables explicitly visible.
- Simplify arch_setup_dma_ops()
Intel VT-d:
- Consolidate domain cache invalidation
- Remove private data from page fault message
- Allocate DMAR fault interrupts locally
- Cleanup and refactoring
ARM-SMMUv2:
- Support for fault debugging hardware on Qualcomm implementations
- Re-land support for the ->domain_alloc_paging() callback
ARM-SMMUv3:
- Improve handling of MSI allocation failure
- Drop support for the "disable_bypass" cmdline option
- Major rework of the CD creation code, following on directly from
the STE rework merged last time around.
- Add unit tests for the new STE/CD manipulation logic
AMD-Vi:
- Final part of SVA changes with generic IO page fault handling
Renesas IPMMU:
- Add support for R8A779H0 hardware
... and a couple smaller fixes and updates across the sub-tree"
* tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits)
iommu/arm-smmu-v3: Make the kunit into a module
arm64: Properly clean up iommu-dma remnants
iommu/amd: Enable Guest Translation after reading IOMMU feature register
iommu/vt-d: Decouple igfx_off from graphic identity mapping
iommu/amd: Fix compilation error
iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry
iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()
iommu/arm-smmu-v3: Move the CD generation for SVA into a function
iommu/arm-smmu-v3: Allocate the CD table entry in advance
iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr()
iommu/arm-smmu-v3: Consolidate clearing a CD table entry
iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function
iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry()
iommu/arm-smmu-v3: Add an ops indirection to the STE code
iommu/arm-smmu-qcom: Don't build debug features as a kernel module
iommu/amd: Add SVA domain support
iommu: Add ops->domain_alloc_sva()
iommu/amd: Initial SVA support for AMD IOMMU
iommu/amd: Add support for enable/disable IOPF
iommu/amd: Add IO page fault notifier handler
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- The vmgenid driver can now be bound using device tree, rather than
just ACPI.
The improvement, from Sudan Landge, lets Amazon's Firecracker VMM
make use of the virtual device without having to expose an otherwise
unused ACPI stack in their "micro VM".
* tag 'random-6.10-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
virt: vmgenid: add support for devicetree bindings
dt-bindings: rng: Add vmgenid support
virt: vmgenid: change implementation to use a platform driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This brings ioctl control to Landlock, contributed by Günther Noack.
This also adds him as a Landlock reviewer, and fixes an issue in the
sample"
* tag 'landlock-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
MAINTAINERS: Add Günther Noack as Landlock reviewer
fs/ioctl: Add a comment to keep the logic in sync with LSM policies
MAINTAINERS: Notify Landlock maintainers about changes to fs/ioctl.c
landlock: Document IOCTL support
samples/landlock: Add support for LANDLOCK_ACCESS_FS_IOCTL_DEV
selftests/landlock: Exhaustive test for the IOCTL allow-list
selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets
selftests/landlock: Test IOCTLs on named pipes
selftests/landlock: Test ioctl(2) and ftruncate(2) with open(O_PATH)
selftests/landlock: Test IOCTL with memfds
selftests/landlock: Test IOCTL support
landlock: Add IOCTL access right for character and block devices
samples/landlock: Fix incorrect free in populate_ruleset_net
|
|
Pull more io_uring updates from Jens Axboe:
"This adds support for IORING_CQE_F_SOCK_NONEMPTY for io_uring accept
requests.
This is very similar to previous work that enabled the same hint for
doing receives on sockets. By far the majority of the work here is
refactoring to enable the networking side to pass back whether or not
the socket had more pending requests after accepting the current one,
the last patch just wires it up for io_uring.
Not only does this enable applications to know whether there are more
connections to accept right now, it also enables smarter logic for
io_uring multishot accept on whether to retry immediately or wait for
a poll trigger"
* tag 'net-accept-more-20240515' of git://git.kernel.dk/linux:
io_uring/net: wire up IORING_CQE_F_SOCK_NONEMPTY for accept
net: pass back whether socket was empty post accept
net: have do_accept() take a struct proto_accept_arg argument
net: change proto and proto_ops accept type
|
|
Commit 1a7d0890dd4a ("kprobe/ftrace: bail out if ftrace was killed")
introduced a bad K&R function definition, which we haven't accepted in a
long long time.
Gcc seems to let it slide, but clang notices with the appropriate error:
kernel/kprobes.c:1140:24: error: a function declaration without a prototype is deprecated in all >
1140 | void kprobe_ftrace_kill()
| ^
| void
but this commit was apparently never in linux-next before it was sent
upstream, so it didn't get the appropriate build test coverage.
Fixes: 1a7d0890dd4a kprobe/ftrace: bail out if ftrace was killed
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- virtio_net: fix missed error path rtnl_unlock after control queue
locking rework
Current release - new code bugs:
- bpf: fix KASAN slab-out-of-bounds in percpu_array_map_gen_lookup,
caused by missing nested map handling
- drv: dsa: correct initialization order for KSZ88x3 ports
Previous releases - regressions:
- af_packet: do not call packet_read_pending() from
tpacket_destruct_skb() fix performance regression
- ipv6: fix route deleting failure when metric equals 0, don't assume
0 means not set / default in this case
Previous releases - always broken:
- bridge: couple of syzbot-driven fixes"
* tag 'net-6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits)
selftests: net: local_termination: annotate the expected failures
net: dsa: microchip: Correct initialization order for KSZ88x3 ports
MAINTAINERS: net: Update reviewers for TI's Ethernet drivers
dt-bindings: net: ti: Update maintainers list
l2tp: fix ICMP error handling for UDP-encap sockets
net: txgbe: fix to control VLAN strip
net: wangxun: match VLAN CTAG and STAG features
net: wangxun: fix to change Rx features
af_packet: do not call packet_read_pending() from tpacket_destruct_skb()
virtio_net: Fix missed rtnl_unlock
netrom: fix possible dead-lock in nr_rt_ioctl()
idpf: don't skip over ethtool tcp-data-split setting
dt-bindings: net: qcom: ethernet: Allow dma-coherent
bonding: fix oops during rmmod
net/ipv6: Fix route deleting failure when metric equals 0
selftests/net: reduce xfrm_policy test time
selftests/bpf: Adjust btf_dump test to reflect recent change in file_operations
selftests/bpf: Adjust test_access_variable_array after a kernel function name change
selftests/net/lib: no need to record ns name if it already exist
net: qrtr: ns: Fix module refcnt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tool updates from Steven Rostedt:
"Specific for timerlat:
- Improve the output of timerlat top by adding a missing \n, and by
avoiding printing color-formatting characters where they are
translated to regular characters.
- Improve timerlat auto-analysis output by replacing '\t' with spaces
to avoid copy-and-paste issues when reporting problems.
- Make the user-space (-u) option the default, as it is the most
complete test. Add a -k option to use the in-kernel workload.
- On timerlat top and hist, add a summary with the overall results.
For instance, the minimum value for all CPUs, the overall average
and the maximum value from all CPUs.
- timerlat hist was printing initial values (i.e., 0 as max, and ~0
as min) if the trace stopped before the first Ret-User event. This
problem was fixed by printing the " - " no value string to the
output if that was the case.
For all RTLA tools:
- Add a --warm-up <seconds> option, allowing the workload to run for
<seconds> before starting to collect results.
- Add a --trace-buffer-size option, allowing the user to set the
tracing buffer size for -t option. This option is mainly useful for
reducing the trace file. Now rtla depends on libtracefs >= 1.6.
- Fix the -t [trace_file] parsing, now it does not require the '='
before the option parameter, and better handles the multiple ways a
user can pass the trace_file.txt"
* tag 'trace-tools-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Documentation: Fix -t, --trace
rtla: Fix -t\--trace[=file]
rtla/timerlat: Fix histogram report when a cpu count is 0
rtla: Add --trace-buffer-size option
rtla/timerlat: Make user-space threads the default
rtla: Add the --warm-up option
rtla/timerlat: Add a summary for hist mode
rtla/timerlat: Add a summary for top mode
rtla/timerlat: Use pretty formatting only on interactive tty
rtla/auto-analysis: Replace \t with spaces
rtla/timerlat: Simplify "no value" printing on top
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing user-event updates from Steven Rostedt:
- Minor update to the user_events interface
The ABI of creating a user event states that the fields are separated
by semicolons, and spaces should be ignored.
But the parsing expected at least one space to be there (which was
incorrect). Fix the reading of the string to handle fields separated
by semicolons but no space between them.
This does extend the API sightly as now "field;field" will now be
parsed and not cause an error. But it should not cause any regressions
as no logic should expect it to fail.
Note, that the logic that parses the event fields to create the
trace_event works with no spaces after the semi-colon. It is
the logic that tests against existing events that is inconsistent.
This causes registering an event without using spaces to succeed
if it doesn't exist, but makes the same call that tries to register
to the same event, but doesn't use spaces, fail.
* tag 'trace-user-events-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/user_events: Add non-spacing separator check
tracing/user_events: Fix non-spaced field matching
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing ring buffer updates from Steven Rostedt:
"Add ring_buffer memory mappings.
The tracing ring buffer was created based on being mostly used with
the splice system call. It is broken up into page ordered sub-buffers
and the reader swaps a new sub-buffer with an existing sub-buffer
that's part of the write buffer. It then has total access to the
swapped out sub-buffer and can do copyless movements of the memory
into other mediums (file system, network, etc).
The buffer is great for passing around the ring buffer contents in the
kernel, but is not so good for when the consumer is the user space
task itself.
A new interface is added that allows user space to memory map the ring
buffer. It will get all the write sub-buffers as well as reader
sub-buffer (that is not written to). It can send an ioctl to change
which sub-buffer is the new reader sub-buffer.
The ring buffer is read only to user space. It only needs to call the
ioctl when it is finished with a sub-buffer and needs a new sub-buffer
that the writer will not write over.
A self test program was also created for testing and can be used as an
example for the interface to user space. The libtracefs (external to
the kernel) also has code that interacts with this, although it is
disabled until the interface is in a official release. It can be
enabled by compiling the library with a special flag. This was used
for testing applications that perform better with the buffer being
mapped.
Memory mapped buffers have limitations. The main one is that it can
not be used with the snapshot logic. If the buffer is mapped,
snapshots will be disabled. If any logic is set to trigger snapshots
on a buffer, that buffer will not be allowed to be mapped"
* tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Add cast to unsigned long addr passed to virt_to_page()
ring-buffer: Have mmapped ring buffer keep track of missed events
ring-buffer/selftest: Add ring-buffer mapping test
Documentation: tracing: Add ring-buffer mapping
tracing: Allow user-space mapping of the ring-buffer
ring-buffer: Introducing ring-buffer mapping functions
ring-buffer: Allocate sub-buffers with __GFP_COMP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove unused ftrace_direct_funcs variables
- Fix a possible NULL pointer dereference race in eventfs
- Update do_div() usage in trace event benchmark test
- Speedup direct function registration with asynchronous RCU callback.
The synchronization was done in the registration code and this caused
delays when registering direct callbacks. Move the freeing to a
call_rcu() that will prevent delaying of the registering.
- Replace simple_strtoul() usage with kstrtoul()
* tag 'trace-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Fix a possible null pointer dereference in eventfs_find_events()
ftrace: Fix possible use-after-free issue in ftrace_location()
ftrace: Remove unused global 'ftrace_direct_func_count'
ftrace: Remove unused list 'ftrace_direct_funcs'
tracing: Improve benchmark test performance by using do_div()
ftrace: Use asynchronous grace period for register_ftrace_direct()
ftrace: Replaces simple_strtoul in ftrace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- tracing/probes: Add new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'
- uprobes performance optimizations:
- Speed up the BPF uprobe event by delaying the fetching of the
uprobe event arguments that are not used in BPF
- Avoid locking by speculatively checking whether uprobe event is
valid
- Reduce lock contention by using read/write_lock instead of
spinlock for uprobe list operation. This improved BPF uprobe
benchmark result 43% on average
- rethook: Remove non-fatal warning messages when tracing stack from
BPF and skip rcu_is_watching() validation in rethook if possible
- objpool: Optimize objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching
nr_cpu_ids because it is a const value
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace
* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobe/ftrace: bail out if ftrace was killed
selftests/ftrace: Fix required features for VFS type test case
objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
objpool: enable inlining objpool_push() and objpool_pop() operations
rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
ftrace: make extra rcu_is_watching() validation check optional
uprobes: reduce contention on uprobes_tree access
rethook: Remove warning messages printed for finding return address of a frame.
fprobe: Add entry/exit callbacks types
selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
Documentation: tracing: add new type '%pd' and '%pD' for kprobe
tracing/probes: support '%pD' type for print struct file's name
tracing/probes: support '%pd' type for print struct dentry's name
uprobes: add speculative lockless system-wide uprobe filter check
uprobes: prepare uprobe args buffer lazily
uprobes: encapsulate preparation of uprobe args buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- Do not put unneeded quotes on the extra command line items which was
inserted from the bootconfig.
- Remove redundant spaces from the extra command line.
* tag 'bootconfig-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
init/main.c: Minor cleanup for the setup_command_line() function
init/main.c: Remove redundant space from saved_command_line
bootconfig: do not put quotes on cmdline items unless necessary
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Remove sentinel elements from ctl_table structs in kernel/*
Removing sentinels in ctl_table arrays reduces the build time size
and runtime memory consumed by ~64 bytes per array. Removals for
net/, io_uring/, mm/, ipc/ and security/ are set to go into mainline
through their respective subsystems making the next release the most
likely place where the final series that removes the check for
proc_name == NULL will land.
This adds to removals already in arch/, drivers/ and fs/.
- Adjust ctl_table definitions and references to allow constification
- Remove unused ctl_table function arguments
- Move non-const elements from ctl_table to ctl_table_header
- Make ctl_table pointers const in ctl_table_root structure
Making the static ctl_table structs const will increase safety by
keeping the pointers to proc_handler functions in .rodata. Though no
ctl_tables where made const in this PR, the ground work for making
that possible has started with these changes sent by Thomas
Weißschuh.
* tag 'sysctl-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: drop now unnecessary out-of-bounds check
sysctl: move sysctl type to ctl_table_header
sysctl: drop sysctl_is_perm_empty_ctl_table
sysctl: treewide: constify argument ctl_table_root::permissions(table)
sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)
bpf: Remove the now superfluous sentinel elements from ctl_table array
delayacct: Remove the now superfluous sentinel elements from ctl_table array
kprobes: Remove the now superfluous sentinel elements from ctl_table array
printk: Remove the now superfluous sentinel elements from ctl_table array
scheduler: Remove the now superfluous sentinel elements from ctl_table array
seccomp: Remove the now superfluous sentinel elements from ctl_table array
timekeeping: Remove the now superfluous sentinel elements from ctl_table array
ftrace: Remove the now superfluous sentinel elements from ctl_table array
umh: Remove the now superfluous sentinel elements from ctl_table array
kernel misc: Remove the now superfluous sentinel elements from ctl_table array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
to schemas
- Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
linflexuart, and Mediatek MT7988 XHCI
- Add 'reg' constraints on DSI and SPI display panels
- More dropping of unnecessary quotes in schemas
- Use full paths rather than relative paths in schema $refs
- Drop redundant storing of phandle for reserved memory
DT Core:
- Use scope based cleanups for kfree() and of_node_put()
- Track interrupt-map and power-supplies for fw_devlink
- Add buffer overflow check in of_modalias()
- Add and use __of_prop_free() helper for freeing struct property"
* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
of: property: Add fw_devlink support for interrupt-map property
dt-bindings: display: panel: constrain 'reg' in DSI panels
dt-bindings: display: panel: constrain 'reg' in SPI panels
dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
dt-bindings: Use full path to other schemas
dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
of: module: add buffer overflow check in of_modalias()
dt-bindings: PCI: microchip: increase number of items in ranges property
dt-bindings: Drop unnecessary quotes on keys
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
of: property: Use scope based cleanup on port_node
of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
of: property: fw_devlink: Add support for "power-supplies" binding
dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
dt-bindings: timer: renesas,tmu: Add R-Car V4M support
dt-bindings: timer: renesas,cmt: Add R-Car V4M support
of: Use scope based of_node_put() cleanups
of: Use scope based kfree() cleanups
...
|
|
fix ACA no query result after gpu reset.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace the legacy interface with amdgpu_dpm_set_pm_policy to set XGMI
PLPD mode. Also, xgmi_plpd_policy sysfs node is not used by any client.
Remove that as well.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On arcturus, allow changing xgmi plpd policy through
'pm_policy/xgmi_plpd' sysfs interface.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
modify the lock type to 'spinlock' to avoid schedule issue
in interrupt context.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On aldebaran, allow changing xgmi plpd policy through
'pm_policy/xgmi_plpd' sysfs interface.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On SOCs with SMU v13.0.6, allow changing xgmi plpd policy through
'pm_policy/xgmi_plpd' sysfs interface.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support to set XGMI PLPD policy levels through 'pm_policy/xgmi_plpd'
sysfs node.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support to select pstate policy in SOCs with SMUv13.0.6
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add PMF message to select a Pstate policy in SOCs with SMU v13.0.6.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support to set/get information about different DPM policies. The
support is only available on SOCs which use swsmu architecture.
A DPM policy type may be defined with different levels. For example, a
policy may be defined to select Pstate preference and then later a
pstate preference may be chosen.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
modify the lock type to 'spinlock' to avoid schedule issue
in interrupt context.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Accurately show all placements when describing objects in debugfs, instead
of bunching them up under the 'CPU' placement.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All apart from AMDGPU_GEM_DOMAIN_GTT memory domains map 1:1 to TTM
placements. And the former be either AMDGPU_PL_PREEMPT or TTM_PL_TT,
depending on AMDGPU_GEM_CREATE_PREEMPTIBLE.
Simplify a few places in the code which convert the TTM placement into
a domain by checking against the current placement directly.
In the conversion AMDGPU_PL_PREEMPT either does not have to be handled
because amdgpu_mem_type_to_domain() cannot return that value anyway.
v2:
* Remove AMDGPU_PL_PREEMPT handling.
v3:
* Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com> # v1
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> # v2
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Help code readability by replacing a bunch of:
bo->tbo.base.resv == vm->root.bo->tbo.base.resv
With:
amdgpu_vm_is_bo_always_valid(vm, bo)
No functional changes.
v2:
* Rename helper and move to amdgpu_vm. (Christian)
v3:
* Use Christian's kerneldoc.
v4:
* Fixed logic inversion in amdgpu_vm_bo_get_memory.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
sdma_v7_0_ring_set_wptr
This commit removes a duplicate check for *is_queue_unmap in the
sdma_v7_0_ring_set_wptr function. The check at line 171 was considered
dead code because at this point in the code, we already know that
*is_queue_unmap is false due to the check at line 161.
By removing this unnecessary check, improves the readability of the
code
Fixes the below:
drivers/gpu/drm/amd/amdgpu/sdma_v7_0.c:171 sdma_v7_0_ring_set_wptr()
warn: duplicate check '*is_queue_unmap' (previous on line 161)
drivers/gpu/drm/amd/amdgpu/sdma_v7_0.c
140 static void sdma_v7_0_ring_set_wptr(struct amdgpu_ring *ring)
141 {
142 struct amdgpu_device *adev = ring->adev;
143 uint32_t *wptr_saved;
144 uint32_t *is_queue_unmap;
145 uint64_t aggregated_db_index;
146 uint32_t mqd_size = adev->mqds[AMDGPU_HW_IP_DMA].mqd_size;
147
148 DRM_DEBUG("Setting write pointer\n");
149
150 if (ring->is_mes_queue) {
151 wptr_saved = (uint32_t *)(ring->mqd_ptr + mqd_size);
152 is_queue_unmap = (uint32_t *)(ring->mqd_ptr + mqd_size +
^^^^^^^^^^^^^^^^ Set here
153 sizeof(uint32_t));
154 aggregated_db_index =
155 amdgpu_mes_get_aggregated_doorbell_index(adev,
156 ring->hw_prio);
157
158 atomic64_set((atomic64_t *)ring->wptr_cpu_addr,
159 ring->wptr << 2);
160 *wptr_saved = ring->wptr << 2;
161 if (*is_queue_unmap) {
^^^^^^^^^^^^^^^ Checked here
162 WDOORBELL64(aggregated_db_index, ring->wptr << 2);
163 DRM_DEBUG("calling WDOORBELL64(0x%08x, 0x%016llx)\n",
164 ring->doorbell_index, ring->wptr << 2);
165 WDOORBELL64(ring->doorbell_index, ring->wptr << 2);
166 } else {
167 DRM_DEBUG("calling WDOORBELL64(0x%08x, 0x%016llx)\n",
168 ring->doorbell_index, ring->wptr << 2);
169 WDOORBELL64(ring->doorbell_index, ring->wptr << 2);
170
--> 171 if (*is_queue_unmap)
^^^^^^^^^^^^^^^ This is dead code. We know it's false.
172 WDOORBELL64(aggregated_db_index,
173 ring->wptr << 2);
174 }
175 } else {
176 if (ring->use_doorbell) {
177 DRM_DEBUG("Using doorbell -- "
178 "wptr_offs == 0x%08x "
Fixes: b412351e91bd ("drm/amdgpu: Add sdma v7_0 ip block support (v7)")
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The following commit updated gmc->noretry from 0 to 1 for GC HW IP
9.3.0:
commit 5f3854f1f4e2 ("drm/amdgpu: add more cases to noretry=1")
This causes the device to hang when a page fault occurs, until the
device is rebooted. Instead, revert back to gmc->noretry=0 so the device
is still responsive.
Fixes: 5f3854f1f4e2 ("drm/amdgpu: add more cases to noretry=1")
Signed-off-by: Tim Van Patten <timvp@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the capabilities for supporting 8k encoding.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Align with new port same as smu 13.x.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
./drivers/gpu/drm/amd/amdgpu/amdgpu.h: amdgpu_umsch_mm.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9063
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The parameters segment_width and last_segment_width are used to control
the configuration of the Output Plane Processor (OPP), specifically the
width of each segment that the display is divided into and the width of
the last segment
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Function parameter or struct member 'segment_width' not described in 'optc35_set_odm_combine'
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Function parameter or struct member 'last_segment_width' not described in 'optc35_set_odm_combine'
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Excess function parameter 'timing' description in 'optc35_set_odm_combine'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If a Radeon 6750M GPU from an iMac12,1 is installed into an
iMac 12,2, there is no backlight device initialized during
boot. Everything else is functional, but the display brightness
cannot be controlled. There are no directories present in
/sys/class/backlight after booting. A simple one line
modification to an if statement fixes this issue by initializing
the radeon backlight device for an iMac12,2 as well if it has a
6750M. After the patch, brightness can be controlled and
radeon_bl0 is present in /sys/class/backlight. This was tested
by compiling the latest kernel with and without the patch.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3378
Signed-off-by: Kendall Smith <kendallsm2@icloud.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
support pp_dpm_pcie on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add module parameter for jpeg. this is a temporary workaround for jpeg unit test fail
on vcn 5.0 now. will be removed later.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GFX1201 was missed in the commit below. Adding it in.
Fixes: 628e1ace2379 ("drm/amdkfd: mark GFX12 system and peer GPU memory mappings as MTYPE_NC")
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix up parameter descriptions.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To catch GPU mapping of system memory, TTM_PL_TT and AMDGPU_PL_PREEMPT
must be checked.
Fixes: 628e1ace2379 ("drm/amdkfd: mark GFX12 system and peer GPU memory mappings as MTYPE_NC")
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix up parameter descriptions.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gpu_id needs to be unique for user space to identify GPUs via KFD
interface. In the current implementation there is a very small
probability of having non unique gpu_ids.
v2: Add check to confirm if gpu_id is unique. If not unique, find one
Changed commit header to reflect the above
v3: Use crc16 as suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Ensure that gpu_id != 0
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
create a new helper function to avoid compiler 'side-effect'
check about RAS_EVENT_LOG() macro.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
disable gpo temprarily since it is not ready in fw
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gfx12 query video mem channel/type/width from umc_info of atom list, so
fix it accordingly.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
use mc address for wptr in add queue packet
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add pp_dpm_dcefclk for smu 14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable GFXOFF for GC v12.0.0.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
